diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt new file mode 100644 index 000000000000..46c55295a3e6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt @@ -0,0 +1,36 @@ +Macronix Raw NAND Controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible: should be "mxic,multi-itfc-v009-nand-controller" +- reg: should contain 1 entry for the registers +- #address-cells: should be set to 1 +- #size-cells: should be set to 0 +- interrupts: interrupt line connected to this raw NAND controller +- clock-names: should contain "ps", "send" and "send_dly" +- clocks: should contain 3 phandles for the "ps", "send" and + "send_dly" clocks + +Children nodes: +- children nodes represent the available NAND chips. + +See Documentation/devicetree/bindings/mtd/nand-controller.yaml +for more details on generic bindings. + +Example: + + nand: nand-controller@43c30000 { + compatible = "mxic,multi-itfc-v009-nand-controller"; + reg = <0x43c30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; + clock-names = "send", "send_dly", "ps"; + + nand@0 { + reg = <0>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + }; + }; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 80a6e2dcd085..42d401ea60ee 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -23,73 +23,6 @@ config MTD_TESTS WARNING: some of the tests will ERASE entire MTD device which they test. Do not use these tests unless you really know what you do. -config MTD_CMDLINE_PARTS - tristate "Command line partition table parsing" - depends on MTD - help - Allow generic configuration of the MTD partition tables via the kernel - command line. Multiple flash resources are supported for hardware where - different kinds of flash memory are available. - - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. The - SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for - example. - - The format for the command line is as follows: - - mtdparts=[; := :[,] - := [@offset][][ro] - := unique id used in mapping driver/device - := standard linux memsize OR "-" to denote all - remaining space - := (NAME) - - Due to the way Linux handles the command line, no spaces are - allowed in the partition definition, including mtd id's and partition - names. - - Examples: - - 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: - mtdparts=sa1100:- - - Same flash, but 2 named partitions, the first one being read-only: - mtdparts=sa1100:256k(ARMboot)ro,-(root) - - If unsure, say 'N'. - -config MTD_OF_PARTS - tristate "OpenFirmware partitioning information support" - default y - depends on OF - help - This provides a partition parsing function which derives - the partition map from the children of the flash node, - as described in Documentation/devicetree/bindings/mtd/partition.txt. - -config MTD_AR7_PARTS - tristate "TI AR7 partitioning support" - help - TI AR7 partitioning support - -config MTD_BCM63XX_PARTS - tristate "BCM63XX CFE partitioning support" - depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST - select CRC32 - select MTD_PARSER_IMAGETAG - help - This provides partition parsing for BCM63xx devices with CFE - bootloaders. - -config MTD_BCM47XX_PARTS - tristate "BCM47XX partitioning support" - depends on BCM47XX || ARCH_BCM_5301X - help - This provides partitions parser for devices based on BCM47xx - boards. - menu "Partition parsers" source "drivers/mtd/parsers/Kconfig" endmenu diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 62d649a959e2..56cc60ccc477 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -7,11 +7,6 @@ obj-$(CONFIG_MTD) += mtd.o mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o -obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o -obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o -obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o -obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o obj-y += parsers/ # 'Users' - code which presents functionality to userspace. diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index f4da7bd552e9..cf8c8be40a9c 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -61,7 +61,9 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#if !FORCE_WORD_WRITE static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#endif static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); static void cfi_amdstd_sync (struct mtd_info *); @@ -256,6 +258,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd) } #endif +#if !FORCE_WORD_WRITE static void fixup_use_write_buffers(struct mtd_info *mtd) { struct map_info *map = mtd->priv; @@ -265,6 +268,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) mtd->_write = cfi_amdstd_write_buffers; } } +#endif /* !FORCE_WORD_WRITE */ /* Atmel chips don't use the same PRI format as AMD chips */ static void fixup_convert_atmel_pri(struct mtd_info *mtd) @@ -1637,11 +1641,11 @@ static int cfi_amdstd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, do_otp_lock, 1); } -static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, - unsigned long adr, map_word datum, - int mode) +static int __xipram do_write_oneword_once(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode, struct cfi_private *cfi) { - struct cfi_private *cfi = map->fldrv_priv; unsigned long timeo = jiffies + HZ; /* * We use a 1ms + 1 jiffies generic timeout for writes (most devices @@ -1654,42 +1658,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, */ unsigned long uWriteTimeout = (HZ / 1000) + 1; int ret = 0; - map_word oldd; - int retry_cnt = 0; - adr += chip->start; - - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, mode); - if (ret) { - mutex_unlock(&chip->mutex); - return ret; - } - - pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", - __func__, adr, datum.x[0]); - - if (mode == FL_OTP_WRITE) - otp_enter(map, chip, adr, map_bankwidth(map)); - - /* - * Check for a NOP for the case when the datum to write is already - * present - it saves time and works around buggy chips that corrupt - * data at other locations when 0xff is written to a location that - * already contains 0xff. - */ - oldd = map_read(map, adr); - if (map_word_equal(map, oldd, datum)) { - pr_debug("MTD %s(): NOP\n", - __func__); - goto op_done; - } - - XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); - ENABLE_VPP(map); - xip_disable(map, chip, adr); - - retry: cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); @@ -1717,40 +1686,125 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, continue; } + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ if (time_after(jiffies, timeo) && - !chip_ready(map, chip, adr)) { + !chip_good(map, chip, adr, datum)) { xip_enable(map, chip, adr); printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); xip_disable(map, chip, adr); + ret = -EIO; break; } - if (chip_ready(map, chip, adr)) + if (chip_good(map, chip, adr, datum)) break; /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } - /* Did we succeed? */ - if (!chip_good(map, chip, adr, datum)) { + + return ret; +} + +static int __xipram do_write_oneword_start(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ + int ret = 0; + + mutex_lock(&chip->mutex); + + ret = get_chip(map, chip, adr, mode); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; + } + + if (mode == FL_OTP_WRITE) + otp_enter(map, chip, adr, map_bankwidth(map)); + + return ret; +} + +static void __xipram do_write_oneword_done(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ + if (mode == FL_OTP_WRITE) + otp_exit(map, chip, adr, map_bankwidth(map)); + + chip->state = FL_READY; + DISABLE_VPP(map); + put_chip(map, chip, adr); + + mutex_unlock(&chip->mutex); +} + +static int __xipram do_write_oneword_retry(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret = 0; + map_word oldd; + int retry_cnt = 0; + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + retry: + ret = do_write_oneword_once(map, chip, adr, datum, mode, cfi); + if (ret) { /* reset on all failures. */ cfi_check_err_status(map, chip, adr); map_write(map, CMD(0xF0), chip->start); /* FIXME - should have reset delay before continuing */ - if (++retry_cnt <= MAX_RETRIES) + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; goto retry; - - ret = -EIO; + } } xip_enable(map, chip, adr); - op_done: - if (mode == FL_OTP_WRITE) - otp_exit(map, chip, adr, map_bankwidth(map)); - chip->state = FL_READY; - DISABLE_VPP(map); - put_chip(map, chip, adr); - mutex_unlock(&chip->mutex); + + return ret; +} + +static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + int ret = 0; + + adr += chip->start; + + pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", __func__, adr, + datum.x[0]); + + ret = do_write_oneword_start(map, chip, adr, mode); + if (ret) + return ret; + + ret = do_write_oneword_retry(map, chip, adr, datum, mode); + + do_write_oneword_done(map, chip, adr, mode); return ret; } @@ -1879,6 +1933,78 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +#if !FORCE_WORD_WRITE +static int __xipram do_write_buffer_wait(struct map_info *map, + struct flchip *chip, unsigned long adr, + map_word datum) +{ + unsigned long timeo; + unsigned long u_write_timeout; + int ret = 0; + + /* + * Timeout is calculated according to CFI data, if available. + * See more comments in cfi_cmdset_0002(). + */ + u_write_timeout = usecs_to_jiffies(chip->buffer_write_time_max); + timeo = jiffies + u_write_timeout; + + for (;;) { + if (chip->state != FL_WRITING) { + /* Someone's suspended the write. Sleep */ + DECLARE_WAITQUEUE(wait, current); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ + if (time_after(jiffies, timeo) && + !chip_good(map, chip, adr, datum)) { + ret = -EIO; + break; + } + + if (chip_good(map, chip, adr, datum)) + break; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); + } + + return ret; +} + +static void __xipram do_write_buffer_reset(struct map_info *map, + struct flchip *chip, + struct cfi_private *cfi) +{ + /* + * Recovery from write-buffer programming failures requires + * the write-to-buffer-reset sequence. Since the last part + * of the sequence also works as a normal reset, we can run + * the same commands regardless of why we are here. + * See e.g. + * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf + */ + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + /* FIXME - should have reset delay before continuing */ +} /* * FIXME: interleaved mode not tested, and probably not supported! @@ -1888,13 +2014,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, int len) { struct cfi_private *cfi = map->fldrv_priv; - unsigned long timeo = jiffies + HZ; - /* - * Timeout is calculated according to CFI data, if available. - * See more comments in cfi_cmdset_0002(). - */ - unsigned long uWriteTimeout = - usecs_to_jiffies(chip->buffer_write_time_max); int ret = -EIO; unsigned long cmd_adr; int z, words; @@ -1951,63 +2070,16 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, adr, map_bankwidth(map), chip->word_write_time); - timeo = jiffies + uWriteTimeout; - - for (;;) { - if (chip->state != FL_WRITING) { - /* Someone's suspended the write. Sleep */ - DECLARE_WAITQUEUE(wait, current); - - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - mutex_unlock(&chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - timeo = jiffies + (HZ / 2); /* FIXME */ - mutex_lock(&chip->mutex); - continue; - } - - /* - * We check "time_after" and "!chip_good" before checking "chip_good" to avoid - * the failure due to scheduling. - */ - if (time_after(jiffies, timeo) && - !chip_good(map, chip, adr, datum)) - break; - - if (chip_good(map, chip, adr, datum)) { - xip_enable(map, chip, adr); - goto op_done; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); + ret = do_write_buffer_wait(map, chip, adr, datum); + if (ret) { + cfi_check_err_status(map, chip, adr); + do_write_buffer_reset(map, chip, cfi); + pr_err("MTD %s(): software timeout, address:0x%.8lx.\n", + __func__, adr); } - /* - * Recovery from write-buffer programming failures requires - * the write-to-buffer-reset sequence. Since the last part - * of the sequence also works as a normal reset, we can run - * the same commands regardless of why we are here. - * See e.g. - * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf - */ - cfi_check_err_status(map, chip, adr); - cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); xip_enable(map, chip, adr); - /* FIXME - should have reset delay before continuing */ - printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n", - __func__, adr); - - ret = -EIO; - op_done: chip->state = FL_READY; DISABLE_VPP(map); put_chip(map, chip, adr); @@ -2091,6 +2163,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +#endif /* !FORCE_WORD_WRITE */ /* * Wait for the flash chip to become ready to write data @@ -2344,7 +2417,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) adr = cfi->addr_unlock1; mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); + ret = get_chip(map, chip, adr, FL_ERASING); if (ret) { mutex_unlock(&chip->mutex); return ret; diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index 839ed40625d6..e5bd3c2bc3b2 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c @@ -20,7 +20,7 @@ static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp) { - struct mtd_info *mtd = NULL; + struct mtd_info *mtd; struct cfi_private *cfi; /* First probe the map to see if we have CFI stuff there. */ diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 49abbc52457d..f96287c4b789 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -79,24 +79,6 @@ config MTD_DATAFLASH_OTP other key product data. The second half is programmed with a unique-to-each-chip bit pattern at the factory. -config MTD_M25P80 - tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER && MTD_SPI_NOR - select SPI_MEM - help - This enables access to most modern SPI flash chips, used for - program and data storage. Series supported include Atmel AT26DF, - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips - are supported as well. See the driver source for the current list, - or to add other chips. - - Note that the original DataFlash chips (AT45 series, not AT26DF), - need an entirely different driver. - - Set up your spi devices with the right board-specific platform data, - if you want to specify device partitioning or to use a device which - doesn't support the JEDEC ID instruction. - config MTD_MCHP23K256 tristate "Microchip 23K256 SRAM" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 94895eab3066..991c8d12c016 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o -obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c deleted file mode 100644 index c50888670250..000000000000 --- a/drivers/mtd/devices/m25p80.c +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * MTD SPI driver for ST M25Pxx (and similar) serial flash chips - * - * Author: Mike Lavender, mike@steroidmicros.com - * - * Copyright (c) 2005, Intec Automation Inc. - * - * Some parts are based on lart.c by Abraham Van Der Merwe - * - * Cleaned up and generalized based on mtd_dataflash.c - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -struct m25p { - struct spi_mem *spimem; - struct spi_nor spi_nor; -}; - -static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_IN(len, NULL, 1)); - void *scratchbuf; - int ret; - - scratchbuf = kmalloc(len, GFP_KERNEL); - if (!scratchbuf) - return -ENOMEM; - - op.data.buf.in = scratchbuf; - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret < 0) - dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret, - code); - else - memcpy(val, scratchbuf, len); - - kfree(scratchbuf); - - return ret; -} - -static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1), - SPI_MEM_OP_NO_ADDR, - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(len, NULL, 1)); - void *scratchbuf; - int ret; - - scratchbuf = kmemdup(buf, len, GFP_KERNEL); - if (!scratchbuf) - return -ENOMEM; - - op.data.buf.out = scratchbuf; - ret = spi_mem_exec_op(flash->spimem, &op); - kfree(scratchbuf); - - return ret; -} - -static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, - const u_char *buf) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), - SPI_MEM_OP_ADDR(nor->addr_width, to, 1), - SPI_MEM_OP_NO_DUMMY, - SPI_MEM_OP_DATA_OUT(len, buf, 1)); - int ret; - - /* get transfer protocols. */ - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); - - if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) - op.addr.nbytes = 0; - - ret = spi_mem_adjust_op_size(flash->spimem, &op); - if (ret) - return ret; - op.data.nbytes = len < op.data.nbytes ? len : op.data.nbytes; - - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret) - return ret; - - return op.data.nbytes; -} - -/* - * Read an address range from the nor chip. The address range - * may be any size provided it is within the physical boundaries. - */ -static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, - u_char *buf) -{ - struct m25p *flash = nor->priv; - struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), - SPI_MEM_OP_ADDR(nor->addr_width, from, 1), - SPI_MEM_OP_DUMMY(nor->read_dummy, 1), - SPI_MEM_OP_DATA_IN(len, buf, 1)); - size_t remaining = len; - int ret; - - /* get transfer protocols. */ - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); - op.dummy.buswidth = op.addr.buswidth; - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); - - /* convert the dummy cycles to the number of bytes */ - op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; - - while (remaining) { - op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX; - ret = spi_mem_adjust_op_size(flash->spimem, &op); - if (ret) - return ret; - - ret = spi_mem_exec_op(flash->spimem, &op); - if (ret) - return ret; - - op.addr.val += op.data.nbytes; - remaining -= op.data.nbytes; - op.data.buf.in += op.data.nbytes; - } - - return len; -} - -/* - * board specific setup should have ensured the SPI clock used here - * matches what the READ command supports, at least until this driver - * understands FAST_READ (for clocks over 25 MHz). - */ -static int m25p_probe(struct spi_mem *spimem) -{ - struct spi_device *spi = spimem->spi; - struct flash_platform_data *data; - struct m25p *flash; - struct spi_nor *nor; - struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - char *flash_name; - int ret; - - data = dev_get_platdata(&spimem->spi->dev); - - flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL); - if (!flash) - return -ENOMEM; - - nor = &flash->spi_nor; - - /* install the hooks */ - nor->read = m25p80_read; - nor->write = m25p80_write; - nor->write_reg = m25p80_write_reg; - nor->read_reg = m25p80_read_reg; - - nor->dev = &spimem->spi->dev; - spi_nor_set_flash_node(nor, spi->dev.of_node); - nor->priv = flash; - - spi_mem_set_drvdata(spimem, flash); - flash->spimem = spimem; - - if (spi->mode & SPI_RX_OCTAL) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; - - if (spi->mode & SPI_TX_OCTAL) - hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 | - SNOR_HWCAPS_PP_1_1_8 | - SNOR_HWCAPS_PP_1_8_8); - } else if (spi->mode & SPI_RX_QUAD) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; - - if (spi->mode & SPI_TX_QUAD) - hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 | - SNOR_HWCAPS_PP_1_1_4 | - SNOR_HWCAPS_PP_1_4_4); - } else if (spi->mode & SPI_RX_DUAL) { - hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; - - if (spi->mode & SPI_TX_DUAL) - hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2; - } - - if (data && data->name) - nor->mtd.name = data->name; - - if (!nor->mtd.name) - nor->mtd.name = spi_mem_get_name(spimem); - - /* For some (historical?) reason many platforms provide two different - * names in flash_platform_data: "name" and "type". Quite often name is - * set to "m25p80" and then "type" provides a real chip name. - * If that's the case, respect "type" and ignore a "name". - */ - if (data && data->type) - flash_name = data->type; - else if (!strcmp(spi->modalias, "spi-nor")) - flash_name = NULL; /* auto-detect */ - else - flash_name = spi->modalias; - - ret = spi_nor_scan(nor, flash_name, &hwcaps); - if (ret) - return ret; - - return mtd_device_register(&nor->mtd, data ? data->parts : NULL, - data ? data->nr_parts : 0); -} - - -static int m25p_remove(struct spi_mem *spimem) -{ - struct m25p *flash = spi_mem_get_drvdata(spimem); - - spi_nor_restore(&flash->spi_nor); - - /* Clean up MTD stuff. */ - return mtd_device_unregister(&flash->spi_nor.mtd); -} - -static void m25p_shutdown(struct spi_mem *spimem) -{ - struct m25p *flash = spi_mem_get_drvdata(spimem); - - spi_nor_restore(&flash->spi_nor); -} -/* - * Do NOT add to this array without reading the following: - * - * Historically, many flash devices are bound to this driver by their name. But - * since most of these flash are compatible to some extent, and their - * differences can often be differentiated by the JEDEC read-ID command, we - * encourage new users to add support to the spi-nor library, and simply bind - * against a generic string here (e.g., "jedec,spi-nor"). - * - * Many flash names are kept here in this list (as well as in spi-nor.c) to - * keep them available as module aliases for existing platforms. - */ -static const struct spi_device_id m25p_ids[] = { - /* - * Allow non-DT platform devices to bind to the "spi-nor" modalias, and - * hack around the fact that the SPI core does not provide uevent - * matching for .of_match_table - */ - {"spi-nor"}, - - /* - * Entries not used in DTs that should be safe to drop after replacing - * them with "spi-nor" in platform data. - */ - {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, - - /* - * Entries that were used in DTs without "jedec,spi-nor" fallback and - * should be kept for backward compatibility. - */ - {"at25df321a"}, {"at25df641"}, {"at26df081a"}, - {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, - {"mx25l25635e"},{"mx66l51235l"}, - {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, - {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, - {"s25fl064k"}, - {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, - {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, - {"m25p64"}, {"m25p128"}, - {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, - {"w25q80bl"}, {"w25q128"}, {"w25q256"}, - - /* Flashes that can't be detected using JEDEC */ - {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, - {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, - {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, - - /* Everspin MRAMs (non-JEDEC) */ - { "mr25h128" }, /* 128 Kib, 40 MHz */ - { "mr25h256" }, /* 256 Kib, 40 MHz */ - { "mr25h10" }, /* 1 Mib, 40 MHz */ - { "mr25h40" }, /* 4 Mib, 40 MHz */ - - { }, -}; -MODULE_DEVICE_TABLE(spi, m25p_ids); - -static const struct of_device_id m25p_of_table[] = { - /* - * Generic compatibility for SPI NOR that can be identified by the - * JEDEC READ ID opcode (0x9F). Use this, if possible. - */ - { .compatible = "jedec,spi-nor" }, - {} -}; -MODULE_DEVICE_TABLE(of, m25p_of_table); - -static struct spi_mem_driver m25p80_driver = { - .spidrv = { - .driver = { - .name = "m25p80", - .of_match_table = m25p_of_table, - }, - .id_table = m25p_ids, - }, - .probe = m25p_probe, - .remove = m25p_remove, - .shutdown = m25p_shutdown, - - /* REVISIT: many of these chips have deep power-down modes, which - * should clearly be entered on suspend() to minimize power use. - * And also when they're otherwise idle... - */ -}; - -module_spi_mem_driver(m25p80_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mike Lavender"); -MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips"); diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index c467286ca007..931e5c2481b5 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -294,7 +294,7 @@ static int phram_param_call(const char *val, const struct kernel_param *kp) #endif } -module_param_call(phram, phram_param_call, NULL, NULL, 000); +module_param_call(phram, phram_param_call, NULL, NULL, 0200); MODULE_PARM_DESC(phram, "Memory region to map. \"phram=,,\""); diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 3b89ab24688b..6597fc2aad34 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -135,7 +135,7 @@ static int pmc551_point(struct mtd_info *mtd, loff_t from, size_t len, static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) { struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; @@ -150,7 +150,6 @@ static int pmc551_erase(struct mtd_info *mtd, struct erase_info *instr) eoff_hi = end & ~(priv->asize - 1); soff_hi = instr->addr & ~(priv->asize - 1); eoff_lo = end & (priv->asize - 1); - soff_lo = instr->addr & (priv->asize - 1); pmc551_point(mtd, instr->addr, instr->len, &retlen, (void **)&ptr, NULL); @@ -225,7 +224,7 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) { struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; @@ -239,7 +238,6 @@ static int pmc551_read(struct mtd_info *mtd, loff_t from, size_t len, end = from + len - 1; soff_hi = from & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); - soff_lo = from & (priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point(mtd, from, len, retlen, (void **)&ptr, NULL); @@ -282,7 +280,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) { struct mypriv *priv = mtd->priv; - u32 soff_hi, soff_lo; /* start address offset hi/lo */ + u32 soff_hi; /* start address offset hi */ u32 eoff_hi, eoff_lo; /* end address offset hi/lo */ unsigned long end; u_char *ptr; @@ -296,7 +294,6 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len, end = to + len - 1; soff_hi = to & ~(priv->asize - 1); eoff_hi = end & ~(priv->asize - 1); - soff_lo = to & (priv->asize - 1); eoff_lo = end & (priv->asize - 1); pmc551_point(mtd, to, len, retlen, (void **)&ptr, NULL); diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c index 788d4996e2c1..946ba80f9758 100644 --- a/drivers/mtd/maps/pismo.c +++ b/drivers/mtd/maps/pismo.c @@ -211,13 +211,12 @@ static int pismo_remove(struct i2c_client *client) static int pismo_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); struct pismo_pdata *pdata = client->dev.platform_data; struct pismo_eeprom eeprom; struct pismo_data *pismo; int ret, i; - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { dev_err(&client->dev, "functionality mismatch\n"); return -EIO; } diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index cebb346877a9..7d96758a8f04 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -68,8 +68,7 @@ static int pxa2xx_flash_probe(struct platform_device *pdev) info->map.name); return -ENOMEM; } - info->map.cached = - ioremap_cached(info->map.phys, info->map.size); + info->map.cached = ioremap_cache(info->map.phys, info->map.size); if (!info->map.cached) printk(KERN_WARNING "Failed to ioremap cached %s\n", info->map.name); diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 408615f29e57..6cc7ecb0c788 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -335,6 +335,82 @@ static const struct device_type mtd_devtype = { .release = mtd_release, }; +static int mtd_partid_show(struct seq_file *s, void *p) +{ + struct mtd_info *mtd = s->private; + + seq_printf(s, "%s\n", mtd->dbg.partid); + + return 0; +} + +static int mtd_partid_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, mtd_partid_show, inode->i_private); +} + +static const struct file_operations mtd_partid_debug_fops = { + .open = mtd_partid_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int mtd_partname_show(struct seq_file *s, void *p) +{ + struct mtd_info *mtd = s->private; + + seq_printf(s, "%s\n", mtd->dbg.partname); + + return 0; +} + +static int mtd_partname_debugfs_open(struct inode *inode, struct file *file) +{ + return single_open(file, mtd_partname_show, inode->i_private); +} + +static const struct file_operations mtd_partname_debug_fops = { + .open = mtd_partname_debugfs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *dfs_dir_mtd; + +static void mtd_debugfs_populate(struct mtd_info *mtd) +{ + struct device *dev = &mtd->dev; + struct dentry *root, *dent; + + if (IS_ERR_OR_NULL(dfs_dir_mtd)) + return; + + root = debugfs_create_dir(dev_name(dev), dfs_dir_mtd); + if (IS_ERR_OR_NULL(root)) { + dev_dbg(dev, "won't show data in debugfs\n"); + return; + } + + mtd->dbg.dfs_dir = root; + + if (mtd->dbg.partid) { + dent = debugfs_create_file("partid", 0400, root, mtd, + &mtd_partid_debug_fops); + if (IS_ERR_OR_NULL(dent)) + dev_err(dev, "can't create debugfs entry for partid\n"); + } + + if (mtd->dbg.partname) { + dent = debugfs_create_file("partname", 0400, root, mtd, + &mtd_partname_debug_fops); + if (IS_ERR_OR_NULL(dent)) + dev_err(dev, + "can't create debugfs entry for partname\n"); + } +} + #ifndef CONFIG_MMU unsigned mtd_mmap_capabilities(struct mtd_info *mtd) { @@ -512,8 +588,6 @@ static int mtd_nvmem_add(struct mtd_info *mtd) return 0; } -static struct dentry *dfs_dir_mtd; - /** * add_mtd_device - register an MTD device * @mtd: pointer to new MTD device info structure @@ -607,13 +681,7 @@ int add_mtd_device(struct mtd_info *mtd) if (error) goto fail_nvmem_add; - if (!IS_ERR_OR_NULL(dfs_dir_mtd)) { - mtd->dbg.dfs_dir = debugfs_create_dir(dev_name(&mtd->dev), dfs_dir_mtd); - if (IS_ERR_OR_NULL(mtd->dbg.dfs_dir)) { - pr_debug("mtd device %s won't show data in debugfs\n", - dev_name(&mtd->dev)); - } - } + mtd_debugfs_populate(mtd); device_create(&mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL, "mtd%dro", i); diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c index e082d632fb74..77bd32a683e1 100644 --- a/drivers/mtd/nand/onenand/onenand_base.c +++ b/drivers/mtd/nand/onenand/onenand_base.c @@ -3880,6 +3880,9 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) if (!this->oob_buf) { if (this->options & ONENAND_PAGEBUF_ALLOC) { this->options &= ~ONENAND_PAGEBUF_ALLOC; +#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE + kfree(this->verify_buf); +#endif kfree(this->page_buf); } return -ENOMEM; diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 5a711d8beaca..e59de3f60cf6 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -351,14 +351,6 @@ config MTD_NAND_SOCRATES help Enables support for NAND Flash chips wired onto Socrates board. -config MTD_NAND_NUC900 - tristate "Nuvoton NUC9xx/w90p910 NAND controller" - depends on ARCH_W90X900 || COMPILE_TEST - depends on HAS_IOMEM - help - This enables the driver for the NAND Flash on evaluation board based - on w90p910 / NUC9xx. - source "drivers/mtd/nand/raw/ingenic/Kconfig" config MTD_NAND_FSMC @@ -407,6 +399,12 @@ config MTD_NAND_MTK Enables support for NAND controller on MTK SoCs. This controller is found on mt27xx, mt81xx, mt65xx SoCs. +config MTD_NAND_MXIC + tristate "Macronix raw NAND controller" + depends on HAS_IOMEM || COMPILE_TEST + help + This selects the Macronix raw NAND controller driver. + config MTD_NAND_TEGRA tristate "NVIDIA Tegra NAND controller" depends on ARCH_TEGRA || COMPILE_TEST diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index efaf5cd25edc..a98721988e61 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -41,7 +41,6 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o -obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o @@ -54,6 +53,7 @@ obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o +obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o obj-$(CONFIG_MTD_NAND_STM32_FMC2) += stm32_fmc2_nand.o obj-$(CONFIG_MTD_NAND_MESON) += meson_nand.o diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 33310b8a6eb8..15ef30b368a5 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -1792,6 +1792,7 @@ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd, int bitflips = 0; int page = addr >> chip->page_shift; int ret; + void *ecc_chunk; if (!buf) buf = nand_get_data_buf(chip); @@ -1804,7 +1805,9 @@ static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd, return ret; for (i = 0; i < chip->ecc.steps; i++, oob += sas) { - ret = nand_check_erased_ecc_chunk(buf, chip->ecc.size, + ecc_chunk = buf + chip->ecc.size * i; + ret = nand_check_erased_ecc_chunk(ecc_chunk, + chip->ecc.size, oob, sas, NULL, 0, chip->ecc.strength); if (ret < 0) diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c index d7b7c0f13909..49afebee50db 100644 --- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c +++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c @@ -310,7 +310,6 @@ static int ingenic_nand_init_chip(struct platform_device *pdev, struct device *dev = &pdev->dev; struct ingenic_nand *nand; struct ingenic_nand_cs *cs; - struct resource *res; struct nand_chip *chip; struct mtd_info *mtd; const __be32 *reg; @@ -326,8 +325,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev, jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND); - res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr); - cs->base = devm_ioremap_resource(dev, res); + cs->base = devm_platform_ioremap_resource(pdev, chipnr); if (IS_ERR(cs->base)) return PTR_ERR(cs->base); @@ -418,6 +416,7 @@ static int ingenic_nand_init_chips(struct ingenic_nfc *nfc, ret = ingenic_nand_init_chip(pdev, nfc, np, i); if (ret) { ingenic_nand_cleanup_chips(nfc); + of_node_put(np); return ret; } diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c index ea57ddcec41e..1b82b687e5a5 100644 --- a/drivers/mtd/nand/raw/meson_nand.c +++ b/drivers/mtd/nand/raw/meson_nand.c @@ -1320,6 +1320,7 @@ static int meson_nfc_nand_chips_init(struct device *dev, ret = meson_nfc_nand_chip_init(dev, nfc, nand_np); if (ret) { meson_nfc_nand_chip_cleanup(nfc); + of_node_put(nand_np); return ret; } } diff --git a/drivers/mtd/nand/raw/mxic_nand.c b/drivers/mtd/nand/raw/mxic_nand.c new file mode 100644 index 000000000000..9d49e6c845e1 --- /dev/null +++ b/drivers/mtd/nand/raw/mxic_nand.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Macronix International Co., Ltd. + * + * Author: + * Mason Yang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "internals.h" + +#define HC_CFG 0x0 +#define HC_CFG_IF_CFG(x) ((x) << 27) +#define HC_CFG_DUAL_SLAVE BIT(31) +#define HC_CFG_INDIVIDUAL BIT(30) +#define HC_CFG_NIO(x) (((x) / 4) << 27) +#define HC_CFG_TYPE(s, t) ((t) << (23 + ((s) * 2))) +#define HC_CFG_TYPE_SPI_NOR 0 +#define HC_CFG_TYPE_SPI_NAND 1 +#define HC_CFG_TYPE_SPI_RAM 2 +#define HC_CFG_TYPE_RAW_NAND 3 +#define HC_CFG_SLV_ACT(x) ((x) << 21) +#define HC_CFG_CLK_PH_EN BIT(20) +#define HC_CFG_CLK_POL_INV BIT(19) +#define HC_CFG_BIG_ENDIAN BIT(18) +#define HC_CFG_DATA_PASS BIT(17) +#define HC_CFG_IDLE_SIO_LVL(x) ((x) << 16) +#define HC_CFG_MAN_START_EN BIT(3) +#define HC_CFG_MAN_START BIT(2) +#define HC_CFG_MAN_CS_EN BIT(1) +#define HC_CFG_MAN_CS_ASSERT BIT(0) + +#define INT_STS 0x4 +#define INT_STS_EN 0x8 +#define INT_SIG_EN 0xc +#define INT_STS_ALL GENMASK(31, 0) +#define INT_RDY_PIN BIT(26) +#define INT_RDY_SR BIT(25) +#define INT_LNR_SUSP BIT(24) +#define INT_ECC_ERR BIT(17) +#define INT_CRC_ERR BIT(16) +#define INT_LWR_DIS BIT(12) +#define INT_LRD_DIS BIT(11) +#define INT_SDMA_INT BIT(10) +#define INT_DMA_FINISH BIT(9) +#define INT_RX_NOT_FULL BIT(3) +#define INT_RX_NOT_EMPTY BIT(2) +#define INT_TX_NOT_FULL BIT(1) +#define INT_TX_EMPTY BIT(0) + +#define HC_EN 0x10 +#define HC_EN_BIT BIT(0) + +#define TXD(x) (0x14 + ((x) * 4)) +#define RXD 0x24 + +#define SS_CTRL(s) (0x30 + ((s) * 4)) +#define LRD_CFG 0x44 +#define LWR_CFG 0x80 +#define RWW_CFG 0x70 +#define OP_READ BIT(23) +#define OP_DUMMY_CYC(x) ((x) << 17) +#define OP_ADDR_BYTES(x) ((x) << 14) +#define OP_CMD_BYTES(x) (((x) - 1) << 13) +#define OP_OCTA_CRC_EN BIT(12) +#define OP_DQS_EN BIT(11) +#define OP_ENHC_EN BIT(10) +#define OP_PREAMBLE_EN BIT(9) +#define OP_DATA_DDR BIT(8) +#define OP_DATA_BUSW(x) ((x) << 6) +#define OP_ADDR_DDR BIT(5) +#define OP_ADDR_BUSW(x) ((x) << 3) +#define OP_CMD_DDR BIT(2) +#define OP_CMD_BUSW(x) (x) +#define OP_BUSW_1 0 +#define OP_BUSW_2 1 +#define OP_BUSW_4 2 +#define OP_BUSW_8 3 + +#define OCTA_CRC 0x38 +#define OCTA_CRC_IN_EN(s) BIT(3 + ((s) * 16)) +#define OCTA_CRC_CHUNK(s, x) ((fls((x) / 32)) << (1 + ((s) * 16))) +#define OCTA_CRC_OUT_EN(s) BIT(0 + ((s) * 16)) + +#define ONFI_DIN_CNT(s) (0x3c + (s)) + +#define LRD_CTRL 0x48 +#define RWW_CTRL 0x74 +#define LWR_CTRL 0x84 +#define LMODE_EN BIT(31) +#define LMODE_SLV_ACT(x) ((x) << 21) +#define LMODE_CMD1(x) ((x) << 8) +#define LMODE_CMD0(x) (x) + +#define LRD_ADDR 0x4c +#define LWR_ADDR 0x88 +#define LRD_RANGE 0x50 +#define LWR_RANGE 0x8c + +#define AXI_SLV_ADDR 0x54 + +#define DMAC_RD_CFG 0x58 +#define DMAC_WR_CFG 0x94 +#define DMAC_CFG_PERIPH_EN BIT(31) +#define DMAC_CFG_ALLFLUSH_EN BIT(30) +#define DMAC_CFG_LASTFLUSH_EN BIT(29) +#define DMAC_CFG_QE(x) (((x) + 1) << 16) +#define DMAC_CFG_BURST_LEN(x) (((x) + 1) << 12) +#define DMAC_CFG_BURST_SZ(x) ((x) << 8) +#define DMAC_CFG_DIR_READ BIT(1) +#define DMAC_CFG_START BIT(0) + +#define DMAC_RD_CNT 0x5c +#define DMAC_WR_CNT 0x98 + +#define SDMA_ADDR 0x60 + +#define DMAM_CFG 0x64 +#define DMAM_CFG_START BIT(31) +#define DMAM_CFG_CONT BIT(30) +#define DMAM_CFG_SDMA_GAP(x) (fls((x) / 8192) << 2) +#define DMAM_CFG_DIR_READ BIT(1) +#define DMAM_CFG_EN BIT(0) + +#define DMAM_CNT 0x68 + +#define LNR_TIMER_TH 0x6c + +#define RDM_CFG0 0x78 +#define RDM_CFG0_POLY(x) (x) + +#define RDM_CFG1 0x7c +#define RDM_CFG1_RDM_EN BIT(31) +#define RDM_CFG1_SEED(x) (x) + +#define LWR_SUSP_CTRL 0x90 +#define LWR_SUSP_CTRL_EN BIT(31) + +#define DMAS_CTRL 0x9c +#define DMAS_CTRL_EN BIT(31) +#define DMAS_CTRL_DIR_READ BIT(30) + +#define DATA_STROB 0xa0 +#define DATA_STROB_EDO_EN BIT(2) +#define DATA_STROB_INV_POL BIT(1) +#define DATA_STROB_DELAY_2CYC BIT(0) + +#define IDLY_CODE(x) (0xa4 + ((x) * 4)) +#define IDLY_CODE_VAL(x, v) ((v) << (((x) % 4) * 8)) + +#define GPIO 0xc4 +#define GPIO_PT(x) BIT(3 + ((x) * 16)) +#define GPIO_RESET(x) BIT(2 + ((x) * 16)) +#define GPIO_HOLDB(x) BIT(1 + ((x) * 16)) +#define GPIO_WPB(x) BIT((x) * 16) + +#define HC_VER 0xd0 + +#define HW_TEST(x) (0xe0 + ((x) * 4)) + +#define MXIC_NFC_MAX_CLK_HZ 50000000 +#define IRQ_TIMEOUT 1000 + +struct mxic_nand_ctlr { + struct clk *ps_clk; + struct clk *send_clk; + struct clk *send_dly_clk; + struct completion complete; + void __iomem *regs; + struct nand_controller controller; + struct device *dev; + struct nand_chip chip; +}; + +static int mxic_nfc_clk_enable(struct mxic_nand_ctlr *nfc) +{ + int ret; + + ret = clk_prepare_enable(nfc->ps_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(nfc->send_clk); + if (ret) + goto err_ps_clk; + + ret = clk_prepare_enable(nfc->send_dly_clk); + if (ret) + goto err_send_dly_clk; + + return ret; + +err_send_dly_clk: + clk_disable_unprepare(nfc->send_clk); +err_ps_clk: + clk_disable_unprepare(nfc->ps_clk); + + return ret; +} + +static void mxic_nfc_clk_disable(struct mxic_nand_ctlr *nfc) +{ + clk_disable_unprepare(nfc->send_clk); + clk_disable_unprepare(nfc->send_dly_clk); + clk_disable_unprepare(nfc->ps_clk); +} + +static void mxic_nfc_set_input_delay(struct mxic_nand_ctlr *nfc, u8 idly_code) +{ + writel(IDLY_CODE_VAL(0, idly_code) | + IDLY_CODE_VAL(1, idly_code) | + IDLY_CODE_VAL(2, idly_code) | + IDLY_CODE_VAL(3, idly_code), + nfc->regs + IDLY_CODE(0)); + writel(IDLY_CODE_VAL(4, idly_code) | + IDLY_CODE_VAL(5, idly_code) | + IDLY_CODE_VAL(6, idly_code) | + IDLY_CODE_VAL(7, idly_code), + nfc->regs + IDLY_CODE(1)); +} + +static int mxic_nfc_clk_setup(struct mxic_nand_ctlr *nfc, unsigned long freq) +{ + int ret; + + ret = clk_set_rate(nfc->send_clk, freq); + if (ret) + return ret; + + ret = clk_set_rate(nfc->send_dly_clk, freq); + if (ret) + return ret; + + /* + * A constant delay range from 0x0 ~ 0x1F for input delay, + * the unit is 78 ps, the max input delay is 2.418 ns. + */ + mxic_nfc_set_input_delay(nfc, 0xf); + + /* + * Phase degree = 360 * freq * output-delay + * where output-delay is a constant value 1 ns in FPGA. + * + * Get Phase degree = 360 * freq * 1 ns + * = 360 * freq * 1 sec / 1000000000 + * = 9 * freq / 25000000 + */ + ret = clk_set_phase(nfc->send_dly_clk, 9 * freq / 25000000); + if (ret) + return ret; + + return 0; +} + +static int mxic_nfc_set_freq(struct mxic_nand_ctlr *nfc, unsigned long freq) +{ + int ret; + + if (freq > MXIC_NFC_MAX_CLK_HZ) + freq = MXIC_NFC_MAX_CLK_HZ; + + mxic_nfc_clk_disable(nfc); + ret = mxic_nfc_clk_setup(nfc, freq); + if (ret) + return ret; + + ret = mxic_nfc_clk_enable(nfc); + if (ret) + return ret; + + return 0; +} + +static irqreturn_t mxic_nfc_isr(int irq, void *dev_id) +{ + struct mxic_nand_ctlr *nfc = dev_id; + u32 sts; + + sts = readl(nfc->regs + INT_STS); + if (sts & INT_RDY_PIN) + complete(&nfc->complete); + else + return IRQ_NONE; + + return IRQ_HANDLED; +} + +static void mxic_nfc_hw_init(struct mxic_nand_ctlr *nfc) +{ + writel(HC_CFG_NIO(8) | HC_CFG_TYPE(1, HC_CFG_TYPE_RAW_NAND) | + HC_CFG_SLV_ACT(0) | HC_CFG_MAN_CS_EN | + HC_CFG_IDLE_SIO_LVL(1), nfc->regs + HC_CFG); + writel(INT_STS_ALL, nfc->regs + INT_STS_EN); + writel(INT_RDY_PIN, nfc->regs + INT_SIG_EN); + writel(0x0, nfc->regs + ONFI_DIN_CNT(0)); + writel(0, nfc->regs + LRD_CFG); + writel(0, nfc->regs + LRD_CTRL); + writel(0x0, nfc->regs + HC_EN); +} + +static void mxic_nfc_cs_enable(struct mxic_nand_ctlr *nfc) +{ + writel(readl(nfc->regs + HC_CFG) | HC_CFG_MAN_CS_EN, + nfc->regs + HC_CFG); + writel(HC_CFG_MAN_CS_ASSERT | readl(nfc->regs + HC_CFG), + nfc->regs + HC_CFG); +} + +static void mxic_nfc_cs_disable(struct mxic_nand_ctlr *nfc) +{ + writel(~HC_CFG_MAN_CS_ASSERT & readl(nfc->regs + HC_CFG), + nfc->regs + HC_CFG); +} + +static int mxic_nfc_wait_ready(struct nand_chip *chip) +{ + struct mxic_nand_ctlr *nfc = nand_get_controller_data(chip); + int ret; + + ret = wait_for_completion_timeout(&nfc->complete, + msecs_to_jiffies(IRQ_TIMEOUT)); + if (!ret) { + dev_err(nfc->dev, "nand device timeout\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static int mxic_nfc_data_xfer(struct mxic_nand_ctlr *nfc, const void *txbuf, + void *rxbuf, unsigned int len) +{ + unsigned int pos = 0; + + while (pos < len) { + unsigned int nbytes = len - pos; + u32 data = 0xffffffff; + u32 sts; + int ret; + + if (nbytes > 4) + nbytes = 4; + + if (txbuf) + memcpy(&data, txbuf + pos, nbytes); + + ret = readl_poll_timeout(nfc->regs + INT_STS, sts, + sts & INT_TX_EMPTY, 0, USEC_PER_SEC); + if (ret) + return ret; + + writel(data, nfc->regs + TXD(nbytes % 4)); + + ret = readl_poll_timeout(nfc->regs + INT_STS, sts, + sts & INT_TX_EMPTY, 0, USEC_PER_SEC); + if (ret) + return ret; + + ret = readl_poll_timeout(nfc->regs + INT_STS, sts, + sts & INT_RX_NOT_EMPTY, 0, + USEC_PER_SEC); + if (ret) + return ret; + + data = readl(nfc->regs + RXD); + if (rxbuf) { + data >>= (8 * (4 - nbytes)); + memcpy(rxbuf + pos, &data, nbytes); + } + if (readl(nfc->regs + INT_STS) & INT_RX_NOT_EMPTY) + dev_warn(nfc->dev, "RX FIFO not empty\n"); + + pos += nbytes; + } + + return 0; +} + +static int mxic_nfc_exec_op(struct nand_chip *chip, + const struct nand_operation *op, bool check_only) +{ + struct mxic_nand_ctlr *nfc = nand_get_controller_data(chip); + const struct nand_op_instr *instr = NULL; + int ret = 0; + unsigned int op_id; + + mxic_nfc_cs_enable(nfc); + init_completion(&nfc->complete); + for (op_id = 0; op_id < op->ninstrs; op_id++) { + instr = &op->instrs[op_id]; + + switch (instr->type) { + case NAND_OP_CMD_INSTR: + writel(0, nfc->regs + HC_EN); + writel(HC_EN_BIT, nfc->regs + HC_EN); + writel(OP_CMD_BUSW(OP_BUSW_8) | OP_DUMMY_CYC(0x3F) | + OP_CMD_BYTES(0), nfc->regs + SS_CTRL(0)); + + ret = mxic_nfc_data_xfer(nfc, + &instr->ctx.cmd.opcode, + NULL, 1); + break; + + case NAND_OP_ADDR_INSTR: + writel(OP_ADDR_BUSW(OP_BUSW_8) | OP_DUMMY_CYC(0x3F) | + OP_ADDR_BYTES(instr->ctx.addr.naddrs), + nfc->regs + SS_CTRL(0)); + ret = mxic_nfc_data_xfer(nfc, + instr->ctx.addr.addrs, NULL, + instr->ctx.addr.naddrs); + break; + + case NAND_OP_DATA_IN_INSTR: + writel(0x0, nfc->regs + ONFI_DIN_CNT(0)); + writel(OP_DATA_BUSW(OP_BUSW_8) | OP_DUMMY_CYC(0x3F) | + OP_READ, nfc->regs + SS_CTRL(0)); + ret = mxic_nfc_data_xfer(nfc, NULL, + instr->ctx.data.buf.in, + instr->ctx.data.len); + break; + + case NAND_OP_DATA_OUT_INSTR: + writel(instr->ctx.data.len, + nfc->regs + ONFI_DIN_CNT(0)); + writel(OP_DATA_BUSW(OP_BUSW_8) | OP_DUMMY_CYC(0x3F), + nfc->regs + SS_CTRL(0)); + ret = mxic_nfc_data_xfer(nfc, + instr->ctx.data.buf.out, NULL, + instr->ctx.data.len); + break; + + case NAND_OP_WAITRDY_INSTR: + ret = mxic_nfc_wait_ready(chip); + break; + } + } + mxic_nfc_cs_disable(nfc); + + return ret; +} + +static int mxic_nfc_setup_data_interface(struct nand_chip *chip, int chipnr, + const struct nand_data_interface *conf) +{ + struct mxic_nand_ctlr *nfc = nand_get_controller_data(chip); + const struct nand_sdr_timings *sdr; + unsigned long freq; + int ret; + + sdr = nand_get_sdr_timings(conf); + if (IS_ERR(sdr)) + return PTR_ERR(sdr); + + if (chipnr == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + freq = NSEC_PER_SEC / (sdr->tRC_min / 1000); + + ret = mxic_nfc_set_freq(nfc, freq); + if (ret) + dev_err(nfc->dev, "set freq:%ld failed\n", freq); + + if (sdr->tRC_min < 30000) + writel(DATA_STROB_EDO_EN, nfc->regs + DATA_STROB); + + return 0; +} + +static const struct nand_controller_ops mxic_nand_controller_ops = { + .exec_op = mxic_nfc_exec_op, + .setup_data_interface = mxic_nfc_setup_data_interface, +}; + +static int mxic_nfc_probe(struct platform_device *pdev) +{ + struct device_node *nand_np, *np = pdev->dev.of_node; + struct mtd_info *mtd; + struct mxic_nand_ctlr *nfc; + struct nand_chip *nand_chip; + int err; + int irq; + + nfc = devm_kzalloc(&pdev->dev, sizeof(struct mxic_nand_ctlr), + GFP_KERNEL); + if (!nfc) + return -ENOMEM; + + nfc->ps_clk = devm_clk_get(&pdev->dev, "ps"); + if (IS_ERR(nfc->ps_clk)) + return PTR_ERR(nfc->ps_clk); + + nfc->send_clk = devm_clk_get(&pdev->dev, "send"); + if (IS_ERR(nfc->send_clk)) + return PTR_ERR(nfc->send_clk); + + nfc->send_dly_clk = devm_clk_get(&pdev->dev, "send_dly"); + if (IS_ERR(nfc->send_dly_clk)) + return PTR_ERR(nfc->send_dly_clk); + + nfc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(nfc->regs)) + return PTR_ERR(nfc->regs); + + nand_chip = &nfc->chip; + mtd = nand_to_mtd(nand_chip); + mtd->dev.parent = &pdev->dev; + + for_each_child_of_node(np, nand_np) + nand_set_flash_node(nand_chip, nand_np); + + nand_chip->priv = nfc; + nfc->dev = &pdev->dev; + nfc->controller.ops = &mxic_nand_controller_ops; + nand_controller_init(&nfc->controller); + nand_chip->controller = &nfc->controller; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to retrieve irq\n"); + return irq; + } + + mxic_nfc_hw_init(nfc); + + err = devm_request_irq(&pdev->dev, irq, mxic_nfc_isr, + 0, "mxic-nfc", nfc); + if (err) + goto fail; + + err = nand_scan(nand_chip, 1); + if (err) + goto fail; + + err = mtd_device_register(mtd, NULL, 0); + if (err) + goto fail; + + platform_set_drvdata(pdev, nfc); + return 0; + +fail: + mxic_nfc_clk_disable(nfc); + return err; +} + +static int mxic_nfc_remove(struct platform_device *pdev) +{ + struct mxic_nand_ctlr *nfc = platform_get_drvdata(pdev); + + nand_release(&nfc->chip); + mxic_nfc_clk_disable(nfc); + return 0; +} + +static const struct of_device_id mxic_nfc_of_ids[] = { + { .compatible = "mxic,multi-itfc-v009-nand-controller", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mxic_nfc_of_ids); + +static struct platform_driver mxic_nfc_driver = { + .probe = mxic_nfc_probe, + .remove = mxic_nfc_remove, + .driver = { + .name = "mxic-nfc", + .of_match_table = mxic_nfc_of_ids, + }, +}; +module_platform_driver(mxic_nfc_driver); + +MODULE_AUTHOR("Mason Yang "); +MODULE_DESCRIPTION("Macronix raw NAND controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index 91f046d4d452..5c2c30a7dffa 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -4112,7 +4112,7 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) { struct nand_chip *chip = mtd_to_nand(mtd); - int ret = -ENOTSUPP; + int ret; ops->retlen = 0; diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c index 2ef15ef94525..96045d60471e 100644 --- a/drivers/mtd/nand/raw/nand_bbt.c +++ b/drivers/mtd/nand/raw/nand_bbt.c @@ -1232,7 +1232,7 @@ static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd) if (!td) { if ((res = nand_memory_bbt(this, bd))) { pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n"); - goto err; + goto err_free_bbt; } return 0; } @@ -1245,7 +1245,7 @@ static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd) buf = vmalloc(len); if (!buf) { res = -ENOMEM; - goto err; + goto err_free_bbt; } /* Is the bbt at a given page? */ @@ -1258,7 +1258,7 @@ static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd) res = check_create(this, buf, bd); if (res) - goto err; + goto err_free_buf; /* Prevent the bbt regions from erasing / writing */ mark_bbt_region(this, td); @@ -1268,7 +1268,9 @@ static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd) vfree(buf); return 0; -err: +err_free_buf: + vfree(buf); +err_free_bbt: kfree(this->bbt); this->bbt = NULL; return res; diff --git a/drivers/mtd/nand/raw/nuc900_nand.c b/drivers/mtd/nand/raw/nuc900_nand.c deleted file mode 100644 index 13bf7b2894d3..000000000000 --- a/drivers/mtd/nand/raw/nuc900_nand.c +++ /dev/null @@ -1,304 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright © 2009 Nuvoton technology corporation. - * - * Wan ZongShun - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define REG_FMICSR 0x00 -#define REG_SMCSR 0xa0 -#define REG_SMISR 0xac -#define REG_SMCMD 0xb0 -#define REG_SMADDR 0xb4 -#define REG_SMDATA 0xb8 - -#define RESET_FMI 0x01 -#define NAND_EN 0x08 -#define READYBUSY (0x01 << 18) - -#define SWRST 0x01 -#define PSIZE (0x01 << 3) -#define DMARWEN (0x03 << 1) -#define BUSWID (0x01 << 4) -#define ECC4EN (0x01 << 5) -#define WP (0x01 << 24) -#define NANDCS (0x01 << 25) -#define ENDADDR (0x01 << 31) - -#define read_data_reg(dev) \ - __raw_readl((dev)->reg + REG_SMDATA) - -#define write_data_reg(dev, val) \ - __raw_writel((val), (dev)->reg + REG_SMDATA) - -#define write_cmd_reg(dev, val) \ - __raw_writel((val), (dev)->reg + REG_SMCMD) - -#define write_addr_reg(dev, val) \ - __raw_writel((val), (dev)->reg + REG_SMADDR) - -struct nuc900_nand { - struct nand_chip chip; - void __iomem *reg; - struct clk *clk; - spinlock_t lock; -}; - -static inline struct nuc900_nand *mtd_to_nuc900(struct mtd_info *mtd) -{ - return container_of(mtd_to_nand(mtd), struct nuc900_nand, chip); -} - -static const struct mtd_partition partitions[] = { - { - .name = "NAND FS 0", - .offset = 0, - .size = 8 * 1024 * 1024 - }, - { - .name = "NAND FS 1", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL - } -}; - -static unsigned char nuc900_nand_read_byte(struct nand_chip *chip) -{ - unsigned char ret; - struct nuc900_nand *nand = mtd_to_nuc900(nand_to_mtd(chip)); - - ret = (unsigned char)read_data_reg(nand); - - return ret; -} - -static void nuc900_nand_read_buf(struct nand_chip *chip, - unsigned char *buf, int len) -{ - int i; - struct nuc900_nand *nand = mtd_to_nuc900(nand_to_mtd(chip)); - - for (i = 0; i < len; i++) - buf[i] = (unsigned char)read_data_reg(nand); -} - -static void nuc900_nand_write_buf(struct nand_chip *chip, - const unsigned char *buf, int len) -{ - int i; - struct nuc900_nand *nand = mtd_to_nuc900(nand_to_mtd(chip)); - - for (i = 0; i < len; i++) - write_data_reg(nand, buf[i]); -} - -static int nuc900_check_rb(struct nuc900_nand *nand) -{ - unsigned int val; - spin_lock(&nand->lock); - val = __raw_readl(nand->reg + REG_SMISR); - val &= READYBUSY; - spin_unlock(&nand->lock); - - return val; -} - -static int nuc900_nand_devready(struct nand_chip *chip) -{ - struct nuc900_nand *nand = mtd_to_nuc900(nand_to_mtd(chip)); - int ready; - - ready = (nuc900_check_rb(nand)) ? 1 : 0; - return ready; -} - -static void nuc900_nand_command_lp(struct nand_chip *chip, - unsigned int command, - int column, int page_addr) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - struct nuc900_nand *nand = mtd_to_nuc900(mtd); - - if (command == NAND_CMD_READOOB) { - column += mtd->writesize; - command = NAND_CMD_READ0; - } - - write_cmd_reg(nand, command & 0xff); - - if (column != -1 || page_addr != -1) { - - if (column != -1) { - if (chip->options & NAND_BUSWIDTH_16 && - !nand_opcode_8bits(command)) - column >>= 1; - write_addr_reg(nand, column); - write_addr_reg(nand, column >> 8 | ENDADDR); - } - if (page_addr != -1) { - write_addr_reg(nand, page_addr); - - if (chip->options & NAND_ROW_ADDR_3) { - write_addr_reg(nand, page_addr >> 8); - write_addr_reg(nand, page_addr >> 16 | ENDADDR); - } else { - write_addr_reg(nand, page_addr >> 8 | ENDADDR); - } - } - } - - switch (command) { - case NAND_CMD_CACHEDPROG: - case NAND_CMD_PAGEPROG: - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_SEQIN: - case NAND_CMD_RNDIN: - case NAND_CMD_STATUS: - return; - - case NAND_CMD_RESET: - if (chip->legacy.dev_ready) - break; - udelay(chip->legacy.chip_delay); - - write_cmd_reg(nand, NAND_CMD_STATUS); - write_cmd_reg(nand, command); - - while (!nuc900_check_rb(nand)) - ; - - return; - - case NAND_CMD_RNDOUT: - write_cmd_reg(nand, NAND_CMD_RNDOUTSTART); - return; - - case NAND_CMD_READ0: - write_cmd_reg(nand, NAND_CMD_READSTART); - /* fall through */ - - default: - - if (!chip->legacy.dev_ready) { - udelay(chip->legacy.chip_delay); - return; - } - } - - /* Apply this short delay always to ensure that we do wait tWB in - * any case on any machine. */ - ndelay(100); - - while (!chip->legacy.dev_ready(chip)) - ; -} - - -static void nuc900_nand_enable(struct nuc900_nand *nand) -{ - unsigned int val; - spin_lock(&nand->lock); - __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR)); - - val = __raw_readl(nand->reg + REG_FMICSR); - - if (!(val & NAND_EN)) - __raw_writel(val | NAND_EN, nand->reg + REG_FMICSR); - - val = __raw_readl(nand->reg + REG_SMCSR); - - val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS); - val |= WP; - - __raw_writel(val, nand->reg + REG_SMCSR); - - spin_unlock(&nand->lock); -} - -static int nuc900_nand_probe(struct platform_device *pdev) -{ - struct nuc900_nand *nuc900_nand; - struct nand_chip *chip; - struct mtd_info *mtd; - struct resource *res; - - nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand), - GFP_KERNEL); - if (!nuc900_nand) - return -ENOMEM; - chip = &(nuc900_nand->chip); - mtd = nand_to_mtd(chip); - - mtd->dev.parent = &pdev->dev; - spin_lock_init(&nuc900_nand->lock); - - nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(nuc900_nand->clk)) - return -ENOENT; - clk_enable(nuc900_nand->clk); - - chip->legacy.cmdfunc = nuc900_nand_command_lp; - chip->legacy.dev_ready = nuc900_nand_devready; - chip->legacy.read_byte = nuc900_nand_read_byte; - chip->legacy.write_buf = nuc900_nand_write_buf; - chip->legacy.read_buf = nuc900_nand_read_buf; - chip->legacy.chip_delay = 50; - chip->options = 0; - chip->ecc.mode = NAND_ECC_SOFT; - chip->ecc.algo = NAND_ECC_HAMMING; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(nuc900_nand->reg)) - return PTR_ERR(nuc900_nand->reg); - - nuc900_nand_enable(nuc900_nand); - - if (nand_scan(chip, 1)) - return -ENXIO; - - mtd_device_register(mtd, partitions, ARRAY_SIZE(partitions)); - - platform_set_drvdata(pdev, nuc900_nand); - - return 0; -} - -static int nuc900_nand_remove(struct platform_device *pdev) -{ - struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev); - - nand_release(&nuc900_nand->chip); - clk_disable(nuc900_nand->clk); - - return 0; -} - -static struct platform_driver nuc900_nand_driver = { - .probe = nuc900_nand_probe, - .remove = nuc900_nand_remove, - .driver = { - .name = "nuc900-fmi", - }, -}; - -module_platform_driver(nuc900_nand_driver); - -MODULE_AUTHOR("Wan ZongShun "); -MODULE_DESCRIPTION("w90p910/NUC9xx nand driver!"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:nuc900-fmi"); diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c index 8d881a28140e..6ec65f48501c 100644 --- a/drivers/mtd/nand/raw/omap2.c +++ b/drivers/mtd/nand/raw/omap2.c @@ -1501,7 +1501,7 @@ static int omap_elm_correct_data(struct nand_chip *chip, u_char *data, } /* Update number of correctable errors */ - stat += err_vec[i].error_count; + stat = max_t(unsigned int, stat, err_vec[i].error_count); /* Update page data with sector size */ data += ecc->size; diff --git a/drivers/mtd/nand/raw/oxnas_nand.c b/drivers/mtd/nand/raw/oxnas_nand.c index 30c51f772de6..c43cb4d92d3d 100644 --- a/drivers/mtd/nand/raw/oxnas_nand.c +++ b/drivers/mtd/nand/raw/oxnas_nand.c @@ -116,7 +116,7 @@ static int oxnas_nand_probe(struct platform_device *pdev) GFP_KERNEL); if (!chip) { err = -ENOMEM; - goto err_clk_unprepare; + goto err_release_child; } chip->controller = &oxnas->base; @@ -137,12 +137,12 @@ static int oxnas_nand_probe(struct platform_device *pdev) /* Scan to find existence of the device */ err = nand_scan(chip, 1); if (err) - goto err_clk_unprepare; + goto err_release_child; err = mtd_device_register(mtd, NULL, 0); if (err) { nand_release(chip); - goto err_clk_unprepare; + goto err_release_child; } oxnas->chips[nchips] = chip; @@ -159,6 +159,8 @@ static int oxnas_nand_probe(struct platform_device *pdev) return 0; +err_release_child: + of_node_put(nand_np); err_clk_unprepare: clk_disable_unprepare(oxnas->clk); return err; diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c index dae0d235bb17..77774250fb11 100644 --- a/drivers/mtd/nand/raw/r852.c +++ b/drivers/mtd/nand/raw/r852.c @@ -998,7 +998,7 @@ static void r852_shutdown(struct pci_dev *pci_dev) #ifdef CONFIG_PM_SLEEP static int r852_suspend(struct device *device) { - struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); + struct r852_device *dev = dev_get_drvdata(device); if (dev->ctlreg & R852_CTL_CARDENABLE) return -EBUSY; @@ -1019,7 +1019,7 @@ static int r852_suspend(struct device *device) static int r852_resume(struct device *device) { - struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); + struct r852_device *dev = dev_get_drvdata(device); r852_disable_irqs(dev); r852_card_update_present(dev); diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index e63acc077c18..8cc852dc7d54 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -1427,21 +1427,16 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, struct stm32_fmc2_timings *tims = &nand->timings; unsigned long hclk = clk_get_rate(fmc2->clk); unsigned long hclkp = NSEC_PER_SEC / (hclk / 1000); - int tar, tclr, thiz, twait, tset_mem, tset_att, thold_mem, thold_att; + unsigned long timing, tar, tclr, thiz, twait; + unsigned long tset_mem, tset_att, thold_mem, thold_att; - tar = hclkp; - if (tar < sdrt->tAR_min) - tar = sdrt->tAR_min; - tims->tar = DIV_ROUND_UP(tar, hclkp) - 1; - if (tims->tar > FMC2_PCR_TIMING_MASK) - tims->tar = FMC2_PCR_TIMING_MASK; + tar = max_t(unsigned long, hclkp, sdrt->tAR_min); + timing = DIV_ROUND_UP(tar, hclkp) - 1; + tims->tar = min_t(unsigned long, timing, FMC2_PCR_TIMING_MASK); - tclr = hclkp; - if (tclr < sdrt->tCLR_min) - tclr = sdrt->tCLR_min; - tims->tclr = DIV_ROUND_UP(tclr, hclkp) - 1; - if (tims->tclr > FMC2_PCR_TIMING_MASK) - tims->tclr = FMC2_PCR_TIMING_MASK; + tclr = max_t(unsigned long, hclkp, sdrt->tCLR_min); + timing = DIV_ROUND_UP(tclr, hclkp) - 1; + tims->tclr = min_t(unsigned long, timing, FMC2_PCR_TIMING_MASK); tims->thiz = FMC2_THIZ; thiz = (tims->thiz + 1) * hclkp; @@ -1451,18 +1446,11 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, * tWAIT > tWP * tWAIT > tREA + tIO */ - twait = hclkp; - if (twait < sdrt->tRP_min) - twait = sdrt->tRP_min; - if (twait < sdrt->tWP_min) - twait = sdrt->tWP_min; - if (twait < sdrt->tREA_max + FMC2_TIO) - twait = sdrt->tREA_max + FMC2_TIO; - tims->twait = DIV_ROUND_UP(twait, hclkp); - if (tims->twait == 0) - tims->twait = 1; - else if (tims->twait > FMC2_PMEM_PATT_TIMING_MASK) - tims->twait = FMC2_PMEM_PATT_TIMING_MASK; + twait = max_t(unsigned long, hclkp, sdrt->tRP_min); + twait = max_t(unsigned long, twait, sdrt->tWP_min); + twait = max_t(unsigned long, twait, sdrt->tREA_max + FMC2_TIO); + timing = DIV_ROUND_UP(twait, hclkp); + tims->twait = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK); /* * tSETUP_MEM > tCS - tWAIT @@ -1477,20 +1465,15 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, if (twait > thiz && (sdrt->tDS_min > twait - thiz) && (tset_mem < sdrt->tDS_min - (twait - thiz))) tset_mem = sdrt->tDS_min - (twait - thiz); - tims->tset_mem = DIV_ROUND_UP(tset_mem, hclkp); - if (tims->tset_mem == 0) - tims->tset_mem = 1; - else if (tims->tset_mem > FMC2_PMEM_PATT_TIMING_MASK) - tims->tset_mem = FMC2_PMEM_PATT_TIMING_MASK; + timing = DIV_ROUND_UP(tset_mem, hclkp); + tims->tset_mem = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK); /* * tHOLD_MEM > tCH * tHOLD_MEM > tREH - tSETUP_MEM * tHOLD_MEM > max(tRC, tWC) - (tSETUP_MEM + tWAIT) */ - thold_mem = hclkp; - if (thold_mem < sdrt->tCH_min) - thold_mem = sdrt->tCH_min; + thold_mem = max_t(unsigned long, hclkp, sdrt->tCH_min); if (sdrt->tREH_min > tset_mem && (thold_mem < sdrt->tREH_min - tset_mem)) thold_mem = sdrt->tREH_min - tset_mem; @@ -1500,11 +1483,8 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, if ((sdrt->tWC_min > tset_mem + twait) && (thold_mem < sdrt->tWC_min - (tset_mem + twait))) thold_mem = sdrt->tWC_min - (tset_mem + twait); - tims->thold_mem = DIV_ROUND_UP(thold_mem, hclkp); - if (tims->thold_mem == 0) - tims->thold_mem = 1; - else if (tims->thold_mem > FMC2_PMEM_PATT_TIMING_MASK) - tims->thold_mem = FMC2_PMEM_PATT_TIMING_MASK; + timing = DIV_ROUND_UP(thold_mem, hclkp); + tims->thold_mem = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK); /* * tSETUP_ATT > tCS - tWAIT @@ -1526,11 +1506,8 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, if (twait > thiz && (sdrt->tDS_min > twait - thiz) && (tset_att < sdrt->tDS_min - (twait - thiz))) tset_att = sdrt->tDS_min - (twait - thiz); - tims->tset_att = DIV_ROUND_UP(tset_att, hclkp); - if (tims->tset_att == 0) - tims->tset_att = 1; - else if (tims->tset_att > FMC2_PMEM_PATT_TIMING_MASK) - tims->tset_att = FMC2_PMEM_PATT_TIMING_MASK; + timing = DIV_ROUND_UP(tset_att, hclkp); + tims->tset_att = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK); /* * tHOLD_ATT > tALH @@ -1545,17 +1522,11 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, * tHOLD_ATT > tRC - (tSETUP_ATT + tWAIT) * tHOLD_ATT > tWC - (tSETUP_ATT + tWAIT) */ - thold_att = hclkp; - if (thold_att < sdrt->tALH_min) - thold_att = sdrt->tALH_min; - if (thold_att < sdrt->tCH_min) - thold_att = sdrt->tCH_min; - if (thold_att < sdrt->tCLH_min) - thold_att = sdrt->tCLH_min; - if (thold_att < sdrt->tCOH_min) - thold_att = sdrt->tCOH_min; - if (thold_att < sdrt->tDH_min) - thold_att = sdrt->tDH_min; + thold_att = max_t(unsigned long, hclkp, sdrt->tALH_min); + thold_att = max_t(unsigned long, thold_att, sdrt->tCH_min); + thold_att = max_t(unsigned long, thold_att, sdrt->tCLH_min); + thold_att = max_t(unsigned long, thold_att, sdrt->tCOH_min); + thold_att = max_t(unsigned long, thold_att, sdrt->tDH_min); if ((sdrt->tWB_max + FMC2_TIO + FMC2_TSYNC > tset_mem) && (thold_att < sdrt->tWB_max + FMC2_TIO + FMC2_TSYNC - tset_mem)) thold_att = sdrt->tWB_max + FMC2_TIO + FMC2_TSYNC - tset_mem; @@ -1574,11 +1545,8 @@ static void stm32_fmc2_calc_timings(struct nand_chip *chip, if ((sdrt->tWC_min > tset_att + twait) && (thold_att < sdrt->tWC_min - (tset_att + twait))) thold_att = sdrt->tWC_min - (tset_att + twait); - tims->thold_att = DIV_ROUND_UP(thold_att, hclkp); - if (tims->thold_att == 0) - tims->thold_att = 1; - else if (tims->thold_att > FMC2_PMEM_PATT_TIMING_MASK) - tims->thold_att = FMC2_PMEM_PATT_TIMING_MASK; + timing = DIV_ROUND_UP(thold_att, hclkp); + tims->thold_att = clamp_val(timing, 1, FMC2_PMEM_PATT_TIMING_MASK); } static int stm32_fmc2_setup_interface(struct nand_chip *chip, int chipnr, diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c index b3f2cabcc7c0..9acf2de37ee0 100644 --- a/drivers/mtd/nand/raw/tango_nand.c +++ b/drivers/mtd/nand/raw/tango_nand.c @@ -659,6 +659,7 @@ static int tango_nand_probe(struct platform_device *pdev) err = chip_init(&pdev->dev, np); if (err) { tango_nand_remove(pdev); + of_node_put(np); return err; } } diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c index e4fe8c4bc711..6b399a75f9ae 100644 --- a/drivers/mtd/nand/raw/vf610_nfc.c +++ b/drivers/mtd/nand/raw/vf610_nfc.c @@ -862,6 +862,7 @@ static int vf610_nfc_probe(struct platform_device *pdev) dev_err(nfc->dev, "Only one NAND chip supported!\n"); err = -EINVAL; + of_node_put(child); goto err_disable_clk; } diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig index 176b75a375b1..f98363c9b363 100644 --- a/drivers/mtd/parsers/Kconfig +++ b/drivers/mtd/parsers/Kconfig @@ -1,4 +1,72 @@ # SPDX-License-Identifier: GPL-2.0-only +config MTD_AR7_PARTS + tristate "TI AR7 partitioning parser" + help + TI AR7 partitioning parser support + +config MTD_BCM47XX_PARTS + tristate "BCM47XX partitioning parser" + depends on BCM47XX || ARCH_BCM_5301X + help + This provides partitions parser for devices based on BCM47xx + boards. + +config MTD_BCM63XX_PARTS + tristate "BCM63XX CFE partitioning parser" + depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST + select CRC32 + select MTD_PARSER_IMAGETAG + help + This provides partition parsing for BCM63xx devices with CFE + bootloaders. + +config MTD_CMDLINE_PARTS + tristate "Command line partition table parsing" + depends on MTD + help + Allow generic configuration of the MTD partition tables via the kernel + command line. Multiple flash resources are supported for hardware where + different kinds of flash memory are available. + + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. The + SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for + example. + + The format for the command line is as follows: + + mtdparts=[; := :[,] + := [@offset][][ro] + := unique id used in mapping driver/device + := standard linux memsize OR "-" to denote all + remaining space + := (NAME) + + Due to the way Linux handles the command line, no spaces are + allowed in the partition definition, including mtd id's and partition + names. + + Examples: + + 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: + mtdparts=sa1100:- + + Same flash, but 2 named partitions, the first one being read-only: + mtdparts=sa1100:256k(ARMboot)ro,-(root) + + If unsure, say 'N'. + +config MTD_OF_PARTS + tristate "OpenFirmware (device tree) partitioning parser" + default y + depends on OF + help + This provides a open firmware device tree partition parser + which derives the partition map from the children of the + flash memory node, as described in + Documentation/devicetree/bindings/mtd/partition.txt. + config MTD_PARSER_IMAGETAG tristate "Parser for BCM963XX Image Tag format partitions" depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile index dd566bdd16e2..b0c5f62f9e85 100644 --- a/drivers/mtd/parsers/Makefile +++ b/drivers/mtd/parsers/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o +obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o +obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o +obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o +obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o diff --git a/drivers/mtd/ar7part.c b/drivers/mtd/parsers/ar7part.c similarity index 100% rename from drivers/mtd/ar7part.c rename to drivers/mtd/parsers/ar7part.c diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/parsers/bcm47xxpart.c similarity index 100% rename from drivers/mtd/bcm47xxpart.c rename to drivers/mtd/parsers/bcm47xxpart.c diff --git a/drivers/mtd/bcm63xxpart.c b/drivers/mtd/parsers/bcm63xxpart.c similarity index 100% rename from drivers/mtd/bcm63xxpart.c rename to drivers/mtd/parsers/bcm63xxpart.c diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/parsers/cmdlinepart.c similarity index 100% rename from drivers/mtd/cmdlinepart.c rename to drivers/mtd/parsers/cmdlinepart.c diff --git a/drivers/mtd/ofpart.c b/drivers/mtd/parsers/ofpart.c similarity index 100% rename from drivers/mtd/ofpart.c rename to drivers/mtd/parsers/ofpart.c diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index dfc47a444b90..4744bf94ad9a 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -774,8 +774,11 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num) continue; /* Read the oob of first sector */ - if (sm_read_sector(ftl, zone_num, block, 0, NULL, &oob)) + if (sm_read_sector(ftl, zone_num, block, 0, NULL, &oob)) { + kfifo_free(&zone->free_sectors); + kfree(zone->lba_to_phys_table); return -EIO; + } /* Test to see if block is erased. It is enough to test first sector, because erase happens in one shot */ diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 6de83277ce8b..f237fcdf7f86 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -2,6 +2,8 @@ menuconfig MTD_SPI_NOR tristate "SPI-NOR device support" depends on MTD + depends on MTD && SPI_MASTER + select SPI_MEM help This is the framework for the SPI NOR which can be used by the SPI device drivers and the SPI-NOR device driver. diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c index 19b8757325d2..009c1da8574c 100644 --- a/drivers/mtd/spi-nor/aspeed-smc.c +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -836,8 +836,10 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, controller->chips[cs] = chip; } - if (ret) + if (ret) { + of_node_put(child); aspeed_smc_unregister(controller); + } return ret; } diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 67f15a1f16fd..7bef63947b29 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -241,23 +242,13 @@ struct cqspi_driver_platdata { #define CQSPI_IRQ_STATUS_MASK 0x1FFFF -static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clear) +static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr) { - unsigned long end = jiffies + msecs_to_jiffies(CQSPI_TIMEOUT_MS); u32 val; - while (1) { - val = readl(reg); - if (clear) - val = ~val; - val &= mask; - - if (val == mask) - return 0; - - if (time_after(jiffies, end)) - return -ETIMEDOUT; - } + return readl_relaxed_poll_timeout(reg, val, + (((clr ? ~val : val) & mask) == mask), + 10, CQSPI_TIMEOUT_MS * 1000); } static bool cqspi_is_idle(struct cqspi_st *cqspi) diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c index dea43ea3eea3..6dac9dd8bf42 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/hisi-sfc.c @@ -401,6 +401,7 @@ static int hisi_spi_nor_register_all(struct hifmc_host *host) if (host->num_chip == HIFMC_MAX_CHIP_NUM) { dev_warn(dev, "Flash device number exceeds the maximum chipselect number\n"); + of_node_put(np); break; } } diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/intel-spi-pci.c index b83c4ab6cd9f..3cda8e7a68f8 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/intel-spi-pci.c @@ -65,6 +65,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info }, + { PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info }, { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info }, { }, diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 1ccf23fe7e4b..43e55a2e9b27 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -621,6 +621,8 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len, switch (nor->read_opcode) { case SPINOR_OP_READ: case SPINOR_OP_READ_FAST: + case SPINOR_OP_READ_4B: + case SPINOR_OP_READ_FAST_4B: break; default: return -EINVAL; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 654bdc41fc99..1d8621d43160 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -19,6 +19,7 @@ #include #include +#include #include #include @@ -39,71 +40,6 @@ #define SPI_NOR_MAX_ID_LEN 6 #define SPI_NOR_MAX_ADDR_WIDTH 4 -struct spi_nor_read_command { - u8 num_mode_clocks; - u8 num_wait_states; - u8 opcode; - enum spi_nor_protocol proto; -}; - -struct spi_nor_pp_command { - u8 opcode; - enum spi_nor_protocol proto; -}; - -enum spi_nor_read_command_index { - SNOR_CMD_READ, - SNOR_CMD_READ_FAST, - SNOR_CMD_READ_1_1_1_DTR, - - /* Dual SPI */ - SNOR_CMD_READ_1_1_2, - SNOR_CMD_READ_1_2_2, - SNOR_CMD_READ_2_2_2, - SNOR_CMD_READ_1_2_2_DTR, - - /* Quad SPI */ - SNOR_CMD_READ_1_1_4, - SNOR_CMD_READ_1_4_4, - SNOR_CMD_READ_4_4_4, - SNOR_CMD_READ_1_4_4_DTR, - - /* Octal SPI */ - SNOR_CMD_READ_1_1_8, - SNOR_CMD_READ_1_8_8, - SNOR_CMD_READ_8_8_8, - SNOR_CMD_READ_1_8_8_DTR, - - SNOR_CMD_READ_MAX -}; - -enum spi_nor_pp_command_index { - SNOR_CMD_PP, - - /* Quad SPI */ - SNOR_CMD_PP_1_1_4, - SNOR_CMD_PP_1_4_4, - SNOR_CMD_PP_4_4_4, - - /* Octal SPI */ - SNOR_CMD_PP_1_1_8, - SNOR_CMD_PP_1_8_8, - SNOR_CMD_PP_8_8_8, - - SNOR_CMD_PP_MAX -}; - -struct spi_nor_flash_parameter { - u64 size; - u32 page_size; - - struct spi_nor_hwcaps hwcaps; - struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; - struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; - - int (*quad_enable)(struct spi_nor *nor); -}; - struct sfdp_parameter_header { u8 id_lsb; u8 minor; @@ -218,16 +154,26 @@ struct sfdp_bfpt { /** * struct spi_nor_fixups - SPI NOR fixup hooks + * @default_init: called after default flash parameters init. Used to tweak + * flash parameters when information provided by the flash_info + * table is incomplete or wrong. * @post_bfpt: called after the BFPT table has been parsed + * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs + * that do not support RDSFDP). Typically used to tweak various + * parameters that could not be extracted by other means (i.e. + * when information provided by the SFDP/flash_info tables are + * incomplete or wrong). * * Those hooks can be used to tweak the SPI NOR configuration when the SFDP * table is broken or not available. */ struct spi_nor_fixups { + void (*default_init)(struct spi_nor *nor); int (*post_bfpt)(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, const struct sfdp_bfpt *bfpt, struct spi_nor_flash_parameter *params); + void (*post_sfdp)(struct spi_nor *nor); }; struct flash_info { @@ -265,6 +211,14 @@ struct flash_info { * bit. Must be used with * SPI_NOR_HAS_LOCK. */ +#define SPI_NOR_XSR_RDY BIT(10) /* + * S3AN flashes have specific opcode to + * read the status register. + * Flags SPI_NOR_XSR_RDY and SPI_S3AN + * use the same bit as one implies the + * other, but we will get rid of + * SPI_S3AN soon. + */ #define SPI_S3AN BIT(10) /* * Xilinx Spartan 3AN In-System Flash * (MFR cannot be used for probing @@ -282,12 +236,158 @@ struct flash_info { /* Part specific fixup hooks. */ const struct spi_nor_fixups *fixups; - - int (*quad_enable)(struct spi_nor *nor); }; #define JEDEC_MFR(info) ((info)->id[0]) +/** + * spi_nor_spimem_xfer_data() - helper function to read/write data to + * flash's memory region + * @nor: pointer to 'struct spi_nor' + * @op: pointer to 'struct spi_mem_op' template for transfer + * + * Return: number of bytes transferred on success, -errno otherwise + */ +static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor, + struct spi_mem_op *op) +{ + bool usebouncebuf = false; + void *rdbuf = NULL; + const void *buf; + int ret; + + if (op->data.dir == SPI_MEM_DATA_IN) + buf = op->data.buf.in; + else + buf = op->data.buf.out; + + if (object_is_on_stack(buf) || !virt_addr_valid(buf)) + usebouncebuf = true; + + if (usebouncebuf) { + if (op->data.nbytes > nor->bouncebuf_size) + op->data.nbytes = nor->bouncebuf_size; + + if (op->data.dir == SPI_MEM_DATA_IN) { + rdbuf = op->data.buf.in; + op->data.buf.in = nor->bouncebuf; + } else { + op->data.buf.out = nor->bouncebuf; + memcpy(nor->bouncebuf, buf, + op->data.nbytes); + } + } + + ret = spi_mem_adjust_op_size(nor->spimem, op); + if (ret) + return ret; + + ret = spi_mem_exec_op(nor->spimem, op); + if (ret) + return ret; + + if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN) + memcpy(rdbuf, nor->bouncebuf, op->data.nbytes); + + return op->data.nbytes; +} + +/** + * spi_nor_spimem_read_data() - read data from flash's memory region via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, + size_t len, u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + + /* get transfer protocols. */ + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + + /* convert the dummy cycles to the number of bytes */ + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_read_data() - read data from flash memory + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, + u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_read_data(nor, from, len, buf); + + return nor->read(nor, from, len, buf); +} + +/** + * spi_nor_spimem_write_data() - write data to flash memory via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, + size_t len, const u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); + + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + op.addr.nbytes = 0; + + return spi_nor_spimem_xfer_data(nor, &op); +} + +/** + * spi_nor_write_data() - write data to flash memory + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_write_data(nor, to, len, buf); + + return nor->write(nor, to, len, buf); +} + /* * Read the status register, returning its value in the location * Return the status register value. @@ -296,15 +396,25 @@ struct flash_info { static int read_sr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading SR\n", (int) ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -315,15 +425,25 @@ static int read_sr(struct spi_nor *nor) static int read_fsr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDFSR, nor->bouncebuf, 1); + } + if (ret < 0) { pr_err("error %d reading FSR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -334,15 +454,25 @@ static int read_fsr(struct spi_nor *nor) static int read_cr(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->read_reg(nor, SPINOR_OP_RDCR, nor->bouncebuf, 1); + } + if (ret < 0) { dev_err(nor->dev, "error %d reading CR\n", ret); return ret; } - return val; + return nor->bouncebuf[0]; } /* @@ -351,8 +481,18 @@ static int read_cr(struct spi_nor *nor) */ static int write_sr(struct spi_nor *nor, u8 val) { - nor->cmd_buf[0] = val; - return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); + nor->bouncebuf[0] = val; + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR, nor->bouncebuf, 1); } /* @@ -361,6 +501,16 @@ static int write_sr(struct spi_nor *nor, u8 val) */ static int write_enable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); } @@ -369,6 +519,16 @@ static int write_enable(struct spi_nor *nor) */ static int write_disable(struct spi_nor *nor) { + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0); } @@ -439,24 +599,12 @@ static u8 spi_nor_convert_3to4_erase(u8 opcode) static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) { - /* Do some manufacturer fixups first */ - switch (JEDEC_MFR(nor->info)) { - case SNOR_MFR_SPANSION: - /* No small sector erase for 4-byte command set */ - nor->erase_opcode = SPINOR_OP_SE; - nor->mtd.erasesize = nor->info->sector_size; - break; - - default: - break; - } - nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode); nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode); nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode); if (!spi_nor_has_uniform_erase(nor)) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = &nor->params.erase_map; struct spi_nor_erase_type *erase; int i; @@ -468,63 +616,131 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor) } } -/* Enable/disable 4-byte addressing mode. */ -static int set_4byte(struct spi_nor *nor, bool enable) +static int macronix_set_4byte(struct spi_nor *nor, bool enable) { - int status; - bool need_wren = false; - u8 cmd; + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? + SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); - switch (JEDEC_MFR(nor->info)) { - case SNOR_MFR_ST: - case SNOR_MFR_MICRON: - /* Some Micron need WREN command; all will accept it */ - need_wren = true; - /* fall through */ - case SNOR_MFR_MACRONIX: - case SNOR_MFR_WINBOND: - if (need_wren) - write_enable(nor); - - cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B; - status = nor->write_reg(nor, cmd, NULL, 0); - if (need_wren) - write_disable(nor); - - if (!status && !enable && - JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) { - /* - * On Winbond W25Q256FV, leaving 4byte mode causes - * the Extended Address Register to be set to 1, so all - * 3-byte-address reads come from the second 16M. - * We must clear the register to enable normal behavior. - */ - write_enable(nor); - nor->cmd_buf[0] = 0; - nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1); - write_disable(nor); - } - - return status; - default: - /* Spansion style */ - nor->cmd_buf[0] = enable << 7; - return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1); + return spi_mem_exec_op(nor->spimem, &op); } + + return nor->write_reg(nor, enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B, + NULL, 0); +} + +static int st_micron_set_4byte(struct spi_nor *nor, bool enable) +{ + int ret; + + write_enable(nor); + ret = macronix_set_4byte(nor, enable); + write_disable(nor); + + return ret; +} + +static int spansion_set_4byte(struct spi_nor *nor, bool enable) +{ + nor->bouncebuf[0] = enable << 7; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_BRWR, nor->bouncebuf, 1); +} + +static int spi_nor_write_ear(struct spi_nor *nor, u8 ear) +{ + nor->bouncebuf[0] = ear; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1); +} + +static int winbond_set_4byte(struct spi_nor *nor, bool enable) +{ + int ret; + + ret = macronix_set_4byte(nor, enable); + if (ret || enable) + return ret; + + /* + * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address + * Register to be set to 1, so all 3-byte-address reads come from the + * second 16M. We must clear the register to enable normal behavior. + */ + write_enable(nor); + ret = spi_nor_write_ear(nor, 0); + write_disable(nor); + + return ret; +} + +static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1); } static int s3an_sr_ready(struct spi_nor *nor) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; } - return !!(val & XSR_RDY); + return !!(nor->bouncebuf[0] & XSR_RDY); +} + +static int spi_nor_clear_sr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); } static int spi_nor_sr_ready(struct spi_nor *nor) @@ -539,13 +755,28 @@ static int spi_nor_sr_ready(struct spi_nor *nor) else dev_err(nor->dev, "Programming Error occurred\n"); - nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0); + spi_nor_clear_sr(nor); return -EIO; } return !(sr & SR_WIP); } +static int spi_nor_clear_fsr(struct spi_nor *nor) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); +} + static int spi_nor_fsr_ready(struct spi_nor *nor) { int fsr = read_fsr(nor); @@ -562,7 +793,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor) dev_err(nor->dev, "Attempted to modify a protected sector.\n"); - nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0); + spi_nor_clear_fsr(nor); return -EIO; } @@ -630,6 +861,16 @@ static int erase_chip(struct spi_nor *nor) { dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); } @@ -666,10 +907,9 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops) * Addr can safely be unsigned int, the biggest S3AN device is smaller than * 4 MiB. */ -static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) +static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr) { - unsigned int offset; - unsigned int page; + u32 offset, page; offset = addr % nor->page_size; page = addr / nor->page_size; @@ -678,30 +918,47 @@ static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr) return page | offset; } +static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr) +{ + if (!nor->params.convert_addr) + return addr; + + return nor->params.convert_addr(nor, addr); +} + /* * Initiate the erasure of a single sector */ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) { - u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; int i; - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); if (nor->erase) return nor->erase(nor, addr); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, addr, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + return spi_mem_exec_op(nor->spimem, &op); + } + /* * Default implementation, if driver doesn't have a specialized HW * control */ for (i = nor->addr_width - 1; i >= 0; i--) { - buf[i] = addr & 0xff; + nor->bouncebuf[i] = addr & 0xff; addr >>= 8; } - return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); + return nor->write_reg(nor, nor->erase_opcode, nor->bouncebuf, + nor->addr_width); } /** @@ -876,7 +1133,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor, struct list_head *erase_list, u64 addr, u32 len) { - const struct spi_nor_erase_map *map = &nor->erase_map; + const struct spi_nor_erase_map *map = &nor->params.erase_map; const struct spi_nor_erase_type *erase, *prev_erase = NULL; struct spi_nor_erase_region *region; struct spi_nor_erase_command *cmd = NULL; @@ -1349,6 +1606,12 @@ static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len) return stm_is_locked_sr(nor, ofs, len, status); } +static const struct spi_nor_locking_ops stm_locking_ops = { + .lock = stm_lock, + .unlock = stm_unlock, + .is_locked = stm_is_locked, +}; + static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) { struct spi_nor *nor = mtd_to_spi_nor(mtd); @@ -1358,7 +1621,7 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_lock(nor, ofs, len); + ret = nor->params.locking_ops->lock(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK); return ret; @@ -1373,7 +1636,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_unlock(nor, ofs, len); + ret = nor->params.locking_ops->unlock(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); return ret; @@ -1388,7 +1651,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) if (ret) return ret; - ret = nor->flash_is_locked(nor, ofs, len); + ret = nor->params.locking_ops->is_locked(nor, ofs, len); spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK); return ret; @@ -1406,7 +1669,18 @@ static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr) write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(2, sr_cr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2); + } + if (ret < 0) { dev_err(nor->dev, "error while writing configuration register\n"); @@ -1485,9 +1759,11 @@ static int macronix_quad_enable(struct spi_nor *nor) */ static int spansion_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN}; + u8 *sr_cr = nor->bouncebuf; int ret; + sr_cr[0] = 0; + sr_cr[1] = CR_QUAD_EN_SPAN; ret = write_sr_cr(nor, sr_cr); if (ret) return ret; @@ -1517,7 +1793,7 @@ static int spansion_quad_enable(struct spi_nor *nor) */ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) { - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Keep the current value of the Status Register. */ @@ -1548,7 +1824,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor) static int spansion_read_cr_quad_enable(struct spi_nor *nor) { struct device *dev = nor->dev; - u8 sr_cr[2]; + u8 *sr_cr = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ @@ -1585,6 +1861,36 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) return 0; } +static int spi_nor_write_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->write_reg(nor, SPINOR_OP_WRSR2, sr2, 1); +} + +static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) +{ + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr2, 1)); + + return spi_mem_exec_op(nor->spimem, &op); + } + + return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1); +} + /** * sr2_bit7_quad_enable() - set QE bit in Status Register 2. * @nor: pointer to a 'struct spi_nor' @@ -1599,22 +1905,22 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor) */ static int sr2_bit7_quad_enable(struct spi_nor *nor) { - u8 sr2; + u8 *sr2 = nor->bouncebuf; int ret; /* Check current Quad Enable bit value. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); + ret = spi_nor_read_sr2(nor, sr2); if (ret) return ret; - if (sr2 & SR2_QUAD_EN_BIT7) + if (*sr2 & SR2_QUAD_EN_BIT7) return 0; /* Update the Quad Enable bit. */ - sr2 |= SR2_QUAD_EN_BIT7; + *sr2 |= SR2_QUAD_EN_BIT7; write_enable(nor); - ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1); + ret = spi_nor_write_sr2(nor, sr2); if (ret < 0) { dev_err(nor->dev, "error while writing status register 2\n"); return -EINVAL; @@ -1627,8 +1933,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor) } /* Read back and check it. */ - ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1); - if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) { + ret = spi_nor_read_sr2(nor, sr2); + if (!(ret > 0 && (*sr2 & SR2_QUAD_EN_BIT7))) { dev_err(nor->dev, "SR2 Quad bit not set\n"); return -EINVAL; } @@ -1687,7 +1993,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor) { int ret; u8 mask = SR_BP2 | SR_BP1 | SR_BP0; - u8 sr_cr[2] = {0}; + u8 *sr_cr = nor->bouncebuf; /* Check current Quad Enable bit value. */ ret = read_cr(nor); @@ -1822,6 +2128,21 @@ static struct spi_nor_fixups mx25l25635_fixups = { .post_bfpt = mx25l25635_post_bfpt_fixups, }; +static void gd25q256_default_init(struct spi_nor *nor) +{ + /* + * Some manufacturer like GigaDevice may use different + * bit to set QE on different memories, so the MFR can't + * indicate the quad_enable method for this case, we need + * to set it in the default_init fixup hook. + */ + nor->params.quad_enable = macronix_quad_enable; +} + +static struct spi_nor_fixups gd25q256_fixups = { + .default_init = gd25q256_default_init, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -1914,7 +2235,7 @@ static const struct flash_info spi_nor_ids[] = { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) - .quad_enable = macronix_quad_enable, + .fixups = &gd25q256_fixups, }, /* Intel/Numonyx -- xxxs33b */ @@ -1988,13 +2309,16 @@ static const struct flash_info spi_nor_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, + { "mt25qu512a (n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024, + SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ | + SPI_NOR_4B_OPCODES) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, /* Micron */ @@ -2003,6 +2327,9 @@ static const struct flash_info spi_nor_ids[] = { SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | SPI_NOR_4B_OPCODES) }, + { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048, + SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ | + SPI_NOR_4B_OPCODES) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -2022,7 +2349,7 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | - SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | USE_CLSR) }, + SPI_NOR_HAS_LOCK | USE_CLSR) }, { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) }, { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, @@ -2060,6 +2387,8 @@ static const struct flash_info spi_nor_ids[] = { { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) }, { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) }, + { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K | + SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, /* ST Microelectronics -- newer production may have feature updates */ @@ -2151,6 +2480,8 @@ static const struct flash_info spi_nor_ids[] = { { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, @@ -2177,10 +2508,21 @@ static const struct flash_info spi_nor_ids[] = { static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { int tmp; - u8 id[SPI_NOR_MAX_ID_LEN]; + u8 *id = nor->bouncebuf; const struct flash_info *info; - tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1)); + + tmp = spi_mem_exec_op(nor->spimem, &op); + } else { + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, + SPI_NOR_MAX_ID_LEN); + } if (tmp < 0) { dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp); return ERR_PTR(tmp); @@ -2213,10 +2555,9 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, while (len) { loff_t addr = from; - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); - ret = nor->read(nor, addr, len, buf); + ret = spi_nor_read_data(nor, addr, len, buf); if (ret == 0) { /* We shouldn't see 0-length reads */ ret = -EIO; @@ -2261,7 +2602,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_BP; /* write one byte. */ - ret = nor->write(nor, to, 1, buf); + ret = spi_nor_write_data(nor, to, 1, buf); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2277,7 +2618,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, nor->program_opcode = SPINOR_OP_AAI_WP; /* write two bytes. */ - ret = nor->write(nor, to, 2, buf + actual); + ret = spi_nor_write_data(nor, to, 2, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 2, "While writing 2 bytes written %i bytes\n", @@ -2300,7 +2641,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, write_enable(nor); nor->program_opcode = SPINOR_OP_BP; - ret = nor->write(nor, to, 1, buf + actual); + ret = spi_nor_write_data(nor, to, 1, buf + actual); if (ret < 0) goto sst_write_err; WARN(ret != 1, "While writing 1 byte written %i bytes\n", @@ -2358,11 +2699,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, page_remain = min_t(size_t, nor->page_size - page_offset, len - i); - if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT) - addr = spi_nor_s3an_addr_convert(nor, addr); + addr = spi_nor_convert_addr(nor, addr); write_enable(nor); - ret = nor->write(nor, addr, page_remain, buf + i); + ret = spi_nor_write_data(nor, addr, page_remain, buf + i); if (ret < 0) goto write_err; written = ret; @@ -2381,8 +2721,10 @@ write_err: static int spi_nor_check(struct spi_nor *nor) { - if (!nor->dev || !nor->read || !nor->write || - !nor->read_reg || !nor->write_reg) { + if (!nor->dev || + (!nor->spimem && + (!nor->read || !nor->write || !nor->read_reg || + !nor->write_reg))) { pr_err("spi-nor: please fill all the necessary fields!\n"); return -EINVAL; } @@ -2390,12 +2732,12 @@ static int spi_nor_check(struct spi_nor *nor) return 0; } -static int s3an_nor_scan(struct spi_nor *nor) +static int s3an_nor_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) { int ret; - u8 val; - ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1); + ret = spi_nor_xread_sr(nor, nor->bouncebuf); if (ret < 0) { dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret); return ret; @@ -2417,7 +2759,7 @@ static int s3an_nor_scan(struct spi_nor *nor) * The current addressing mode can be read from the XRDSR register * and should not be changed, because is a destructive operation. */ - if (val & XSR_PAGESIZE) { + if (nor->bouncebuf[0] & XSR_PAGESIZE) { /* Flash in Power of 2 mode */ nor->page_size = (nor->page_size == 264) ? 256 : 512; nor->mtd.writebufsize = nor->page_size; @@ -2425,7 +2767,8 @@ static int s3an_nor_scan(struct spi_nor *nor) nor->mtd.erasesize = 8 * nor->page_size; } else { /* Flash in Default addressing mode */ - nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT; + nor->params.convert_addr = s3an_convert_addr; + nor->mtd.erasesize = nor->info->sector_size; } return 0; @@ -2525,11 +2868,11 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf) int ret; while (len) { - ret = nor->read(nor, addr, len, buf); - if (!ret || ret > len) - return -EIO; + ret = spi_nor_read_data(nor, addr, len, buf); if (ret < 0) return ret; + if (!ret || ret > len) + return -EIO; buf += ret; addr += ret; @@ -2574,6 +2917,126 @@ static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr, return ret; } +/** + * spi_nor_spimem_check_op - check if the operation is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@op: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_op(struct spi_nor *nor, + struct spi_mem_op *op) +{ + /* + * First test with 4 address bytes. The opcode itself might + * be a 3B addressing opcode but we don't care, because + * SPI controller implementation should not check the opcode, + * but just the sequence. + */ + op->addr.nbytes = 4; + if (!spi_mem_supports_op(nor->spimem, op)) { + if (nor->mtd.size > SZ_16M) + return -ENOTSUPP; + + /* If flash size <= 16MB, 3 address bytes are sufficient */ + op->addr.nbytes = 3; + if (!spi_mem_supports_op(nor->spimem, op)) + return -ENOTSUPP; + } + + return 0; +} + +/** + * spi_nor_spimem_check_readop - check if the read op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@read: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_readop(struct spi_nor *nor, + const struct spi_nor_read_command *read) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_DUMMY(0, 1), + SPI_MEM_OP_DATA_IN(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto); + op.dummy.buswidth = op.addr.buswidth; + op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) * + op.dummy.buswidth / 8; + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_check_pp - check if the page program op is supported + * by controller + *@nor: pointer to a 'struct spi_nor' + *@pp: pointer to op template to be checked + * + * Returns 0 if operation is supported, -ENOTSUPP otherwise. + */ +static int spi_nor_spimem_check_pp(struct spi_nor *nor, + const struct spi_nor_pp_command *pp) +{ + struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1), + SPI_MEM_OP_ADDR(3, 0, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(0, NULL, 1)); + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto); + + return spi_nor_spimem_check_op(nor, &op); +} + +/** + * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol + * based on SPI controller capabilities + * @nor: pointer to a 'struct spi_nor' + * @hwcaps: pointer to resulting capabilities after adjusting + * according to controller and flash's capability + */ +static void +spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps) +{ + struct spi_nor_flash_parameter *params = &nor->params; + unsigned int cap; + + /* DTR modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_DTR; + + /* X-X-X modes are not supported yet, mask them all. */ + *hwcaps &= ~SNOR_HWCAPS_X_X_X; + + for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) { + int rdidx, ppidx; + + if (!(*hwcaps & BIT(cap))) + continue; + + rdidx = spi_nor_hwcaps_read2cmd(BIT(cap)); + if (rdidx >= 0 && + spi_nor_spimem_check_readop(nor, ¶ms->reads[rdidx])) + *hwcaps &= ~BIT(cap); + + ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap)); + if (ppidx < 0) + continue; + + if (spi_nor_spimem_check_pp(nor, + ¶ms->page_programs[ppidx])) + *hwcaps &= ~BIT(cap); + } +} + /** * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters. * @nor: pointer to a 'struct spi_nor' @@ -2892,7 +3355,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, struct spi_nor_flash_parameter *params) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase_type = map->erase_type; struct sfdp_bfpt bfpt; size_t len; @@ -2973,7 +3436,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor, * Erase Types defined in the bfpt table. */ erase_mask = 0; - memset(&nor->erase_map, 0, sizeof(nor->erase_map)); + memset(¶ms->erase_map, 0, sizeof(params->erase_map)); for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) { const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i]; u32 erasesize; @@ -3248,14 +3711,18 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region, /** * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map * @nor: pointer to a 'struct spi_nor' + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is + * used for storing SFDP parsed data * @smpt: pointer to the sector map parameter table * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, - const u32 *smpt) +static int +spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, + struct spi_nor_flash_parameter *params, + const u32 *smpt) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase = map->erase_type; struct spi_nor_erase_region *region; u64 offset; @@ -3334,6 +3801,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * spi_nor_parse_smpt() - parse Sector Map Parameter Table * @nor: pointer to a 'struct spi_nor' * @smpt_header: sector map parameter table header + * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' + * that is used for storing SFDP parsed data * * This table is optional, but when available, we parse it to identify the * location and size of sectors within the main data array of the flash memory @@ -3342,7 +3811,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor, * Return: 0 on success, -errno otherwise. */ static int spi_nor_parse_smpt(struct spi_nor *nor, - const struct sfdp_parameter_header *smpt_header) + const struct sfdp_parameter_header *smpt_header, + struct spi_nor_flash_parameter *params) { const u32 *sector_map; u32 *smpt; @@ -3371,11 +3841,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor, goto out; } - ret = spi_nor_init_non_uniform_erase_map(nor, sector_map); + ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map); if (ret) goto out; - spi_nor_regions_sort_erase_types(&nor->erase_map); + spi_nor_regions_sort_erase_types(¶ms->erase_map); /* fall through */ out: kfree(smpt); @@ -3431,7 +3901,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, { 0u /* not used */, BIT(12) }, }; struct spi_nor_pp_command *params_pp = params->page_programs; - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = ¶ms->erase_map; struct spi_nor_erase_type *erase_type = map->erase_type; u32 *dwords; size_t len; @@ -3453,7 +3923,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, addr = SFDP_PARAM_HEADER_PTP(param_header); ret = spi_nor_read_sfdp(nor, addr, len, dwords); if (ret) - return ret; + goto out; /* Fix endianness of the 4BAIT DWORDs. */ for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++) @@ -3661,7 +4131,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor, switch (SFDP_PARAM_HEADER_ID(param_header)) { case SFDP_SECTOR_MAP_ID: - err = spi_nor_parse_smpt(nor, param_header); + err = spi_nor_parse_smpt(nor, param_header, params); break; case SFDP_4BAIT_ID: @@ -3690,133 +4160,7 @@ exit: return err; } -static int spi_nor_init_params(struct spi_nor *nor, - struct spi_nor_flash_parameter *params) -{ - struct spi_nor_erase_map *map = &nor->erase_map; - const struct flash_info *info = nor->info; - u8 i, erase_mask; - - /* Set legacy flash parameters as default. */ - memset(params, 0, sizeof(*params)); - - /* Set SPI NOR sizes. */ - params->size = (u64)info->sector_size * info->n_sectors; - params->page_size = info->page_size; - - /* (Fast) Read settings. */ - params->hwcaps.mask |= SNOR_HWCAPS_READ; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], - 0, 0, SPINOR_OP_READ, - SNOR_PROTO_1_1_1); - - if (!(info->flags & SPI_NOR_NO_FR)) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], - 0, 8, SPINOR_OP_READ_FAST, - SNOR_PROTO_1_1_1); - } - - if (info->flags & SPI_NOR_DUAL_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], - 0, 8, SPINOR_OP_READ_1_1_2, - SNOR_PROTO_1_1_2); - } - - if (info->flags & SPI_NOR_QUAD_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], - 0, 8, SPINOR_OP_READ_1_1_4, - SNOR_PROTO_1_1_4); - } - - if (info->flags & SPI_NOR_OCTAL_READ) { - params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; - spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8], - 0, 8, SPINOR_OP_READ_1_1_8, - SNOR_PROTO_1_1_8); - } - - /* Page Program settings. */ - params->hwcaps.mask |= SNOR_HWCAPS_PP; - spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], - SPINOR_OP_PP, SNOR_PROTO_1_1_1); - - /* - * Sector Erase settings. Sort Erase Types in ascending order, with the - * smallest erase size starting at BIT(0). - */ - erase_mask = 0; - i = 0; - if (info->flags & SECT_4K_PMC) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, - SPINOR_OP_BE_4K_PMC); - i++; - } else if (info->flags & SECT_4K) { - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], 4096u, - SPINOR_OP_BE_4K); - i++; - } - erase_mask |= BIT(i); - spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, - SPINOR_OP_SE); - spi_nor_init_uniform_erase_map(map, erase_mask, params->size); - - /* Select the procedure to set the Quad Enable bit. */ - if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD | - SNOR_HWCAPS_PP_QUAD)) { - switch (JEDEC_MFR(info)) { - case SNOR_MFR_MACRONIX: - params->quad_enable = macronix_quad_enable; - break; - - case SNOR_MFR_ST: - case SNOR_MFR_MICRON: - break; - - default: - /* Kept only for backward compatibility purpose. */ - params->quad_enable = spansion_quad_enable; - break; - } - - /* - * Some manufacturer like GigaDevice may use different - * bit to set QE on different memories, so the MFR can't - * indicate the quad_enable method for this case, we need - * set it in flash info list. - */ - if (info->quad_enable) - params->quad_enable = info->quad_enable; - } - - if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && - !(info->flags & SPI_NOR_SKIP_SFDP)) { - struct spi_nor_flash_parameter sfdp_params; - struct spi_nor_erase_map prev_map; - - memcpy(&sfdp_params, params, sizeof(sfdp_params)); - memcpy(&prev_map, &nor->erase_map, sizeof(prev_map)); - - if (spi_nor_parse_sfdp(nor, &sfdp_params)) { - nor->addr_width = 0; - nor->flags &= ~SNOR_F_4B_OPCODES; - /* restore previous erase map */ - memcpy(&nor->erase_map, &prev_map, - sizeof(nor->erase_map)); - } else { - memcpy(params, &sfdp_params, sizeof(*params)); - } - } - - return 0; -} - static int spi_nor_select_read(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, u32 shared_hwcaps) { int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1; @@ -3829,7 +4173,7 @@ static int spi_nor_select_read(struct spi_nor *nor, if (cmd < 0) return -EINVAL; - read = ¶ms->reads[cmd]; + read = &nor->params.reads[cmd]; nor->read_opcode = read->opcode; nor->read_proto = read->proto; @@ -3848,7 +4192,6 @@ static int spi_nor_select_read(struct spi_nor *nor, } static int spi_nor_select_pp(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, u32 shared_hwcaps) { int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1; @@ -3861,7 +4204,7 @@ static int spi_nor_select_pp(struct spi_nor *nor, if (cmd < 0) return -EINVAL; - pp = ¶ms->page_programs[cmd]; + pp = &nor->params.page_programs[cmd]; nor->program_opcode = pp->opcode; nor->write_proto = pp->proto; return 0; @@ -3920,11 +4263,12 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map, return erase; } -static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size) +static int spi_nor_select_erase(struct spi_nor *nor) { - struct spi_nor_erase_map *map = &nor->erase_map; + struct spi_nor_erase_map *map = &nor->params.erase_map; const struct spi_nor_erase_type *erase = NULL; struct mtd_info *mtd = &nor->mtd; + u32 wanted_size = nor->info->sector_size; int i; /* @@ -3967,12 +4311,11 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size) return 0; } -static int spi_nor_setup(struct spi_nor *nor, - const struct spi_nor_flash_parameter *params, - const struct spi_nor_hwcaps *hwcaps) +static int spi_nor_default_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) { + struct spi_nor_flash_parameter *params = &nor->params; u32 ignored_mask, shared_mask; - bool enable_quad_io; int err; /* @@ -3981,20 +4324,29 @@ static int spi_nor_setup(struct spi_nor *nor, */ shared_mask = hwcaps->mask & params->hwcaps.mask; - /* SPI n-n-n protocols are not supported yet. */ - ignored_mask = (SNOR_HWCAPS_READ_2_2_2 | - SNOR_HWCAPS_READ_4_4_4 | - SNOR_HWCAPS_READ_8_8_8 | - SNOR_HWCAPS_PP_4_4_4 | - SNOR_HWCAPS_PP_8_8_8); - if (shared_mask & ignored_mask) { - dev_dbg(nor->dev, - "SPI n-n-n protocols are not supported yet.\n"); - shared_mask &= ~ignored_mask; + if (nor->spimem) { + /* + * When called from spi_nor_probe(), all caps are set and we + * need to discard some of them based on what the SPI + * controller actually supports (using spi_mem_supports_op()). + */ + spi_nor_spimem_adjust_hwcaps(nor, &shared_mask); + } else { + /* + * SPI n-n-n protocols are not supported when the SPI + * controller directly implements the spi_nor interface. + * Yet another reason to switch to spi-mem. + */ + ignored_mask = SNOR_HWCAPS_X_X_X; + if (shared_mask & ignored_mask) { + dev_dbg(nor->dev, + "SPI n-n-n protocols are not supported.\n"); + shared_mask &= ~ignored_mask; + } } /* Select the (Fast) Read command. */ - err = spi_nor_select_read(nor, params, shared_mask); + err = spi_nor_select_read(nor, shared_mask); if (err) { dev_err(nor->dev, "can't select read settings supported by both the SPI controller and memory.\n"); @@ -4002,7 +4354,7 @@ static int spi_nor_setup(struct spi_nor *nor, } /* Select the Page Program command. */ - err = spi_nor_select_pp(nor, params, shared_mask); + err = spi_nor_select_pp(nor, shared_mask); if (err) { dev_err(nor->dev, "can't select write settings supported by both the SPI controller and memory.\n"); @@ -4010,30 +4362,325 @@ static int spi_nor_setup(struct spi_nor *nor, } /* Select the Sector Erase command. */ - err = spi_nor_select_erase(nor, nor->info->sector_size); + err = spi_nor_select_erase(nor); if (err) { dev_err(nor->dev, "can't select erase settings supported by both the SPI controller and memory.\n"); return err; } - /* Enable Quad I/O if needed. */ - enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || - spi_nor_get_protocol_width(nor->write_proto) == 4); - if (enable_quad_io && params->quad_enable) - nor->quad_enable = params->quad_enable; - else - nor->quad_enable = NULL; - return 0; } +static int spi_nor_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) +{ + if (!nor->params.setup) + return 0; + + return nor->params.setup(nor, hwcaps); +} + +static void macronix_set_default_init(struct spi_nor *nor) +{ + nor->params.quad_enable = macronix_quad_enable; + nor->params.set_4byte = macronix_set_4byte; +} + +static void st_micron_set_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; + nor->params.quad_enable = NULL; + nor->params.set_4byte = st_micron_set_4byte; +} + +static void winbond_set_default_init(struct spi_nor *nor) +{ + nor->params.set_4byte = winbond_set_4byte; +} + +/** + * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and + * settings based on MFR register and ->default_init() hook. + * @nor: pointer to a 'struct spi-nor'. + */ +static void spi_nor_manufacturer_init_params(struct spi_nor *nor) +{ + /* Init flash parameters based on MFR */ + switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_MACRONIX: + macronix_set_default_init(nor); + break; + + case SNOR_MFR_ST: + case SNOR_MFR_MICRON: + st_micron_set_default_init(nor); + break; + + case SNOR_MFR_WINBOND: + winbond_set_default_init(nor); + break; + + default: + break; + } + + if (nor->info->fixups && nor->info->fixups->default_init) + nor->info->fixups->default_init(nor); +} + +/** + * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings + * based on JESD216 SFDP standard. + * @nor: pointer to a 'struct spi-nor'. + * + * The method has a roll-back mechanism: in case the SFDP parsing fails, the + * legacy flash parameters and settings will be restored. + */ +static void spi_nor_sfdp_init_params(struct spi_nor *nor) +{ + struct spi_nor_flash_parameter sfdp_params; + + memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params)); + + if (spi_nor_parse_sfdp(nor, &sfdp_params)) { + nor->addr_width = 0; + nor->flags &= ~SNOR_F_4B_OPCODES; + } else { + memcpy(&nor->params, &sfdp_params, sizeof(nor->params)); + } +} + +/** + * spi_nor_info_init_params() - Initialize the flash's parameters and settings + * based on nor->info data. + * @nor: pointer to a 'struct spi-nor'. + */ +static void spi_nor_info_init_params(struct spi_nor *nor) +{ + struct spi_nor_flash_parameter *params = &nor->params; + struct spi_nor_erase_map *map = ¶ms->erase_map; + const struct flash_info *info = nor->info; + struct device_node *np = spi_nor_get_flash_node(nor); + u8 i, erase_mask; + + /* Initialize legacy flash parameters and settings. */ + params->quad_enable = spansion_quad_enable; + params->set_4byte = spansion_set_4byte; + params->setup = spi_nor_default_setup; + + /* Set SPI NOR sizes. */ + params->size = (u64)info->sector_size * info->n_sectors; + params->page_size = info->page_size; + + if (!(info->flags & SPI_NOR_NO_FR)) { + /* Default to Fast Read for DT and non-DT platform devices. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; + + /* Mask out Fast Read if not requested at DT instantiation. */ + if (np && !of_property_read_bool(np, "m25p,fast-read")) + params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; + } + + /* (Fast) Read settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], + 0, 0, SPINOR_OP_READ, + SNOR_PROTO_1_1_1); + + if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST) + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], + 0, 8, SPINOR_OP_READ_FAST, + SNOR_PROTO_1_1_1); + + if (info->flags & SPI_NOR_DUAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], + 0, 8, SPINOR_OP_READ_1_1_2, + SNOR_PROTO_1_1_2); + } + + if (info->flags & SPI_NOR_QUAD_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], + 0, 8, SPINOR_OP_READ_1_1_4, + SNOR_PROTO_1_1_4); + } + + if (info->flags & SPI_NOR_OCTAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8], + 0, 8, SPINOR_OP_READ_1_1_8, + SNOR_PROTO_1_1_8); + } + + /* Page Program settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_PP; + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP, SNOR_PROTO_1_1_1); + + /* + * Sector Erase settings. Sort Erase Types in ascending order, with the + * smallest erase size starting at BIT(0). + */ + erase_mask = 0; + i = 0; + if (info->flags & SECT_4K_PMC) { + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], 4096u, + SPINOR_OP_BE_4K_PMC); + i++; + } else if (info->flags & SECT_4K) { + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], 4096u, + SPINOR_OP_BE_4K); + i++; + } + erase_mask |= BIT(i); + spi_nor_set_erase_type(&map->erase_type[i], info->sector_size, + SPINOR_OP_SE); + spi_nor_init_uniform_erase_map(map, erase_mask, params->size); +} + +static void spansion_post_sfdp_fixups(struct spi_nor *nor) +{ + struct mtd_info *mtd = &nor->mtd; + + if (mtd->size <= SZ_16M) + return; + + nor->flags |= SNOR_F_4B_OPCODES; + /* No small sector erase for 4-byte command set */ + nor->erase_opcode = SPINOR_OP_SE; + nor->mtd.erasesize = nor->info->sector_size; +} + +static void s3an_post_sfdp_fixups(struct spi_nor *nor) +{ + nor->params.setup = s3an_nor_setup; +} + +/** + * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings + * after SFDP has been parsed (is also called for SPI NORs that do not + * support RDSFDP). + * @nor: pointer to a 'struct spi_nor' + * + * Typically used to tweak various parameters that could not be extracted by + * other means (i.e. when information provided by the SFDP/flash_info tables + * are incomplete or wrong). + */ +static void spi_nor_post_sfdp_fixups(struct spi_nor *nor) +{ + switch (JEDEC_MFR(nor->info)) { + case SNOR_MFR_SPANSION: + spansion_post_sfdp_fixups(nor); + break; + + default: + break; + } + + if (nor->info->flags & SPI_S3AN) + s3an_post_sfdp_fixups(nor); + + if (nor->info->fixups && nor->info->fixups->post_sfdp) + nor->info->fixups->post_sfdp(nor); +} + +/** + * spi_nor_late_init_params() - Late initialization of default flash parameters. + * @nor: pointer to a 'struct spi_nor' + * + * Used to set default flash parameters and settings when the ->default_init() + * hook or the SFDP parser let voids. + */ +static void spi_nor_late_init_params(struct spi_nor *nor) +{ + /* + * NOR protection support. When locking_ops are not provided, we pick + * the default ones. + */ + if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops) + nor->params.locking_ops = &stm_locking_ops; +} + +/** + * spi_nor_init_params() - Initialize the flash's parameters and settings. + * @nor: pointer to a 'struct spi-nor'. + * + * The flash parameters and settings are initialized based on a sequence of + * calls that are ordered by priority: + * + * 1/ Default flash parameters initialization. The initializations are done + * based on nor->info data: + * spi_nor_info_init_params() + * + * which can be overwritten by: + * 2/ Manufacturer flash parameters initialization. The initializations are + * done based on MFR register, or when the decisions can not be done solely + * based on MFR, by using specific flash_info tweeks, ->default_init(): + * spi_nor_manufacturer_init_params() + * + * which can be overwritten by: + * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and + * should be more accurate that the above. + * spi_nor_sfdp_init_params() + * + * Please note that there is a ->post_bfpt() fixup hook that can overwrite + * the flash parameters and settings immediately after parsing the Basic + * Flash Parameter Table. + * + * which can be overwritten by: + * 4/ Post SFDP flash parameters initialization. Used to tweak various + * parameters that could not be extracted by other means (i.e. when + * information provided by the SFDP/flash_info tables are incomplete or + * wrong). + * spi_nor_post_sfdp_fixups() + * + * 5/ Late default flash parameters initialization, used when the + * ->default_init() hook or the SFDP parser do not set specific params. + * spi_nor_late_init_params() + */ +static void spi_nor_init_params(struct spi_nor *nor) +{ + spi_nor_info_init_params(nor); + + spi_nor_manufacturer_init_params(nor); + + if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && + !(nor->info->flags & SPI_NOR_SKIP_SFDP)) + spi_nor_sfdp_init_params(nor); + + spi_nor_post_sfdp_fixups(nor); + + spi_nor_late_init_params(nor); +} + +/** + * spi_nor_quad_enable() - enable Quad I/O if needed. + * @nor: pointer to a 'struct spi_nor' + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_quad_enable(struct spi_nor *nor) +{ + if (!nor->params.quad_enable) + return 0; + + if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 || + spi_nor_get_protocol_width(nor->write_proto) == 4)) + return 0; + + return nor->params.quad_enable(nor); +} + static int spi_nor_init(struct spi_nor *nor) { int err; if (nor->clear_sr_bp) { - if (nor->quad_enable == spansion_quad_enable) + if (nor->params.quad_enable == spansion_quad_enable) nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp; err = nor->clear_sr_bp(nor); @@ -4044,12 +4691,10 @@ static int spi_nor_init(struct spi_nor *nor) } } - if (nor->quad_enable) { - err = nor->quad_enable(nor); - if (err) { - dev_err(nor->dev, "quad mode not supported\n"); - return err; - } + err = spi_nor_quad_enable(nor); + if (err) { + dev_err(nor->dev, "quad mode not supported\n"); + return err; } if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) { @@ -4062,7 +4707,7 @@ static int spi_nor_init(struct spi_nor *nor) */ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, "enabling reset hack; may not recover from unexpected reboots\n"); - set_4byte(nor, true); + nor->params.set_4byte(nor, true); } return 0; @@ -4086,7 +4731,7 @@ void spi_nor_restore(struct spi_nor *nor) /* restore the addressing mode */ if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) && nor->flags & SNOR_F_BROKEN_RESET) - set_4byte(nor, false); + nor->params.set_4byte(nor, false); } EXPORT_SYMBOL_GPL(spi_nor_restore); @@ -4102,14 +4747,91 @@ static const struct flash_info *spi_nor_match_id(const char *name) return NULL; } +static int spi_nor_set_addr_width(struct spi_nor *nor) +{ + if (nor->addr_width) { + /* already configured from SFDP */ + } else if (nor->info->addr_width) { + nor->addr_width = nor->info->addr_width; + } else if (nor->mtd.size > 0x1000000) { + /* enable 4-byte addressing if the device exceeds 16MiB */ + nor->addr_width = 4; + } else { + nor->addr_width = 3; + } + + if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { + dev_err(nor->dev, "address width is too large: %u\n", + nor->addr_width); + return -EINVAL; + } + + /* Set 4byte opcodes when possible. */ + if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && + !(nor->flags & SNOR_F_HAS_4BAIT)) + spi_nor_set_4byte_opcodes(nor); + + return 0; +} + +static void spi_nor_debugfs_init(struct spi_nor *nor, + const struct flash_info *info) +{ + struct mtd_info *mtd = &nor->mtd; + + mtd->dbg.partname = info->name; + mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN", + info->id_len, info->id); +} + +static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor, + const char *name) +{ + const struct flash_info *info = NULL; + + if (name) + info = spi_nor_match_id(name); + /* Try to auto-detect if chip name wasn't specified or not found */ + if (!info) + info = spi_nor_read_id(nor); + if (IS_ERR_OR_NULL(info)) + return ERR_PTR(-ENOENT); + + /* + * If caller has specified name of flash model that can normally be + * detected using JEDEC, let's verify it. + */ + if (name && info->id_len) { + const struct flash_info *jinfo; + + jinfo = spi_nor_read_id(nor); + if (IS_ERR(jinfo)) { + return jinfo; + } else if (jinfo != info) { + /* + * JEDEC knows better, so overwrite platform ID. We + * can't trust partitions any longer, but we'll let + * mtd apply them anyway, since some partitions may be + * marked read-only, and we don't want to lose that + * information, even if it's not 100% accurate. + */ + dev_warn(nor->dev, "found %s, expected %s\n", + jinfo->name, info->name); + info = jinfo; + } + } + + return info; +} + int spi_nor_scan(struct spi_nor *nor, const char *name, const struct spi_nor_hwcaps *hwcaps) { - struct spi_nor_flash_parameter params; - const struct flash_info *info = NULL; + const struct flash_info *info; struct device *dev = nor->dev; struct mtd_info *mtd = &nor->mtd; struct device_node *np = spi_nor_get_flash_node(nor); + struct spi_nor_flash_parameter *params = &nor->params; int ret; int i; @@ -4122,40 +4844,28 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->read_proto = SNOR_PROTO_1_1_1; nor->write_proto = SNOR_PROTO_1_1_1; - if (name) - info = spi_nor_match_id(name); - /* Try to auto-detect if chip name wasn't specified or not found */ - if (!info) - info = spi_nor_read_id(nor); - if (IS_ERR_OR_NULL(info)) - return -ENOENT; - /* - * If caller has specified name of flash model that can normally be - * detected using JEDEC, let's verify it. + * We need the bounce buffer early to read/write registers when going + * through the spi-mem layer (buffers have to be DMA-able). + * For spi-mem drivers, we'll reallocate a new buffer if + * nor->page_size turns out to be greater than PAGE_SIZE (which + * shouldn't happen before long since NOR pages are usually less + * than 1KB) after spi_nor_scan() returns. */ - if (name && info->id_len) { - const struct flash_info *jinfo; + nor->bouncebuf_size = PAGE_SIZE; + nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; - jinfo = spi_nor_read_id(nor); - if (IS_ERR(jinfo)) { - return PTR_ERR(jinfo); - } else if (jinfo != info) { - /* - * JEDEC knows better, so overwrite platform ID. We - * can't trust partitions any longer, but we'll let - * mtd apply them anyway, since some partitions may be - * marked read-only, and we don't want to lose that - * information, even if it's not 100% accurate. - */ - dev_warn(dev, "found %s, expected %s\n", - jinfo->name, info->name); - info = jinfo; - } - } + info = spi_nor_get_flash_info(nor, name); + if (IS_ERR(info)) + return PTR_ERR(info); nor->info = info; + spi_nor_debugfs_init(nor, info); + mutex_init(&nor->lock); /* @@ -4163,9 +4873,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, * spi_nor_wait_till_ready(). Xilinx S3AN share MFR * with Atmel spi-nor */ - if (info->flags & SPI_S3AN) + if (info->flags & SPI_NOR_XSR_RDY) nor->flags |= SNOR_F_READY_XSR_RDY; + if (info->flags & SPI_NOR_HAS_LOCK) + nor->flags |= SNOR_F_HAS_LOCK; + /* * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up * with the software protection bits set. @@ -4176,10 +4889,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, nor->info->flags & SPI_NOR_HAS_LOCK) nor->clear_sr_bp = spi_nor_clear_sr_bp; - /* Parse the Serial Flash Discoverable Parameters table. */ - ret = spi_nor_init_params(nor, ¶ms); - if (ret) - return ret; + /* Init flash parameters based on flash_info struct and SFDP */ + spi_nor_init_params(nor); if (!mtd->name) mtd->name = dev_name(dev); @@ -4187,21 +4898,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; - mtd->size = params.size; + mtd->size = params->size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; mtd->_resume = spi_nor_resume; - /* NOR protection support for STmicro/Micron chips and similar */ - if (JEDEC_MFR(info) == SNOR_MFR_ST || - JEDEC_MFR(info) == SNOR_MFR_MICRON || - info->flags & SPI_NOR_HAS_LOCK) { - nor->flash_lock = stm_lock; - nor->flash_unlock = stm_unlock; - nor->flash_is_locked = stm_is_locked; - } - - if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) { + if (nor->params.locking_ops) { mtd->_lock = spi_nor_lock; mtd->_unlock = spi_nor_unlock; mtd->_is_locked = spi_nor_is_locked; @@ -4226,68 +4928,28 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, mtd->flags |= MTD_NO_ERASE; mtd->dev.parent = dev; - nor->page_size = params.page_size; + nor->page_size = params->page_size; mtd->writebufsize = nor->page_size; - if (np) { - /* If we were instantiated by DT, use it */ - if (of_property_read_bool(np, "m25p,fast-read")) - params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - else - params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - } else { - /* If we weren't instantiated by DT, default to fast-read */ - params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; - } - if (of_property_read_bool(np, "broken-flash-reset")) nor->flags |= SNOR_F_BROKEN_RESET; - /* Some devices cannot do fast-read, no matter what DT tells us */ - if (info->flags & SPI_NOR_NO_FR) - params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - /* * Configure the SPI memory: * - select op codes for (Fast) Read, Page Program and Sector Erase. * - set the number of dummy cycles (mode cycles + wait states). * - set the SPI protocols for register and memory accesses. - * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). */ - ret = spi_nor_setup(nor, ¶ms, hwcaps); + ret = spi_nor_setup(nor, hwcaps); if (ret) return ret; - if (nor->addr_width) { - /* already configured from SFDP */ - } else if (info->addr_width) { - nor->addr_width = info->addr_width; - } else if (mtd->size > 0x1000000) { - /* enable 4-byte addressing if the device exceeds 16MiB */ - nor->addr_width = 4; - } else { - nor->addr_width = 3; - } - - if (info->flags & SPI_NOR_4B_OPCODES || - (JEDEC_MFR(info) == SNOR_MFR_SPANSION && mtd->size > SZ_16M)) + if (info->flags & SPI_NOR_4B_OPCODES) nor->flags |= SNOR_F_4B_OPCODES; - if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES && - !(nor->flags & SNOR_F_HAS_4BAIT)) - spi_nor_set_4byte_opcodes(nor); - - if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { - dev_err(dev, "address width is too large: %u\n", - nor->addr_width); - return -EINVAL; - } - - if (info->flags & SPI_S3AN) { - ret = s3an_nor_scan(nor); - if (ret) - return ret; - } + ret = spi_nor_set_addr_width(nor); + if (ret) + return ret; /* Send all the required SPI flash commands to initialize device */ ret = spi_nor_init(nor); @@ -4317,6 +4979,174 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, } EXPORT_SYMBOL_GPL(spi_nor_scan); +static int spi_nor_probe(struct spi_mem *spimem) +{ + struct spi_device *spi = spimem->spi; + struct flash_platform_data *data = dev_get_platdata(&spi->dev); + struct spi_nor *nor; + /* + * Enable all caps by default. The core will mask them after + * checking what's really supported using spi_mem_supports_op(). + */ + const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL }; + char *flash_name; + int ret; + + nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL); + if (!nor) + return -ENOMEM; + + nor->spimem = spimem; + nor->dev = &spi->dev; + spi_nor_set_flash_node(nor, spi->dev.of_node); + + spi_mem_set_drvdata(spimem, nor); + + if (data && data->name) + nor->mtd.name = data->name; + + if (!nor->mtd.name) + nor->mtd.name = spi_mem_get_name(spimem); + + /* + * For some (historical?) reason many platforms provide two different + * names in flash_platform_data: "name" and "type". Quite often name is + * set to "m25p80" and then "type" provides a real chip name. + * If that's the case, respect "type" and ignore a "name". + */ + if (data && data->type) + flash_name = data->type; + else if (!strcmp(spi->modalias, "spi-nor")) + flash_name = NULL; /* auto-detect */ + else + flash_name = spi->modalias; + + ret = spi_nor_scan(nor, flash_name, &hwcaps); + if (ret) + return ret; + + /* + * None of the existing parts have > 512B pages, but let's play safe + * and add this logic so that if anyone ever adds support for such + * a NOR we don't end up with buffer overflows. + */ + if (nor->page_size > PAGE_SIZE) { + nor->bouncebuf_size = nor->page_size; + devm_kfree(nor->dev, nor->bouncebuf); + nor->bouncebuf = devm_kmalloc(nor->dev, + nor->bouncebuf_size, + GFP_KERNEL); + if (!nor->bouncebuf) + return -ENOMEM; + } + + return mtd_device_register(&nor->mtd, data ? data->parts : NULL, + data ? data->nr_parts : 0); +} + +static int spi_nor_remove(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); + + /* Clean up MTD stuff. */ + return mtd_device_unregister(&nor->mtd); +} + +static void spi_nor_shutdown(struct spi_mem *spimem) +{ + struct spi_nor *nor = spi_mem_get_drvdata(spimem); + + spi_nor_restore(nor); +} + +/* + * Do NOT add to this array without reading the following: + * + * Historically, many flash devices are bound to this driver by their name. But + * since most of these flash are compatible to some extent, and their + * differences can often be differentiated by the JEDEC read-ID command, we + * encourage new users to add support to the spi-nor library, and simply bind + * against a generic string here (e.g., "jedec,spi-nor"). + * + * Many flash names are kept here in this list (as well as in spi-nor.c) to + * keep them available as module aliases for existing platforms. + */ +static const struct spi_device_id spi_nor_dev_ids[] = { + /* + * Allow non-DT platform devices to bind to the "spi-nor" modalias, and + * hack around the fact that the SPI core does not provide uevent + * matching for .of_match_table + */ + {"spi-nor"}, + + /* + * Entries not used in DTs that should be safe to drop after replacing + * them with "spi-nor" in platform data. + */ + {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"}, + + /* + * Entries that were used in DTs without "jedec,spi-nor" fallback and + * should be kept for backward compatibility. + */ + {"at25df321a"}, {"at25df641"}, {"at26df081a"}, + {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"}, + {"mx25l25635e"},{"mx66l51235l"}, + {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"}, + {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"}, + {"s25fl064k"}, + {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"}, + {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"}, + {"m25p64"}, {"m25p128"}, + {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"}, + {"w25q80bl"}, {"w25q128"}, {"w25q256"}, + + /* Flashes that can't be detected using JEDEC */ + {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"}, + {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, + {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, + + /* Everspin MRAMs (non-JEDEC) */ + { "mr25h128" }, /* 128 Kib, 40 MHz */ + { "mr25h256" }, /* 256 Kib, 40 MHz */ + { "mr25h10" }, /* 1 Mib, 40 MHz */ + { "mr25h40" }, /* 4 Mib, 40 MHz */ + + { }, +}; +MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids); + +static const struct of_device_id spi_nor_of_table[] = { + /* + * Generic compatibility for SPI NOR that can be identified by the + * JEDEC READ ID opcode (0x9F). Use this, if possible. + */ + { .compatible = "jedec,spi-nor" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, spi_nor_of_table); + +/* + * REVISIT: many of these chips have deep power-down modes, which + * should clearly be entered on suspend() to minimize power use. + * And also when they're otherwise idle... + */ +static struct spi_mem_driver spi_nor_driver = { + .spidrv = { + .driver = { + .name = "spi-nor", + .of_match_table = spi_nor_of_table, + }, + .id_table = spi_nor_dev_ids, + }, + .probe = spi_nor_probe, + .remove = spi_nor_remove, + .shutdown = spi_nor_shutdown, +}; +module_spi_mem_driver(spi_nor_driver); + MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Huang Shijie "); MODULE_AUTHOR("Mike Lavender"); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 4ca8c1c845fb..249e8d9bfbcd 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -189,6 +189,9 @@ struct module; /* only needed for owner field in mtd_info */ */ struct mtd_debug_info { struct dentry *dfs_dir; + + const char *partname; + const char *partid; }; struct mtd_info { diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index cebc38b6d6f5..0c7483843a32 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -346,7 +346,7 @@ static inline unsigned int nanddev_ntargets(const struct nand_device *nand) } /** - * nanddev_neraseblocks() - Get the total number of erasablocks + * nanddev_neraseblocks() - Get the total number of eraseblocks * @nand: NAND device * * Return: the total number of eraseblocks exposed by @nand. diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h index 01306ebe266d..d2c3cf29e0d1 100644 --- a/include/linux/mtd/sharpsl.h +++ b/include/linux/mtd/sharpsl.h @@ -5,6 +5,9 @@ * Copyright (C) 2008 Dmitry Baryshkov */ +#ifndef _MTD_SHARPSL_H +#define _MTD_SHARPSL_H + #include #include #include @@ -16,3 +19,5 @@ struct sharpsl_nand_platform_data { unsigned int nr_partitions; const char *const *part_parsers; }; + +#endif /* _MTD_SHARPSL_H */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 9f57cdfcc93d..fc0b4b19c900 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -9,6 +9,7 @@ #include #include #include +#include /* * Manufacturer IDs @@ -224,7 +225,6 @@ static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto) return spi_nor_get_protocol_data_nbits(proto); } -#define SPI_NOR_MAX_CMD_SIZE 8 enum spi_nor_ops { SPI_NOR_OPS_READ = 0, SPI_NOR_OPS_WRITE, @@ -237,12 +237,12 @@ enum spi_nor_option_flags { SNOR_F_USE_FSR = BIT(0), SNOR_F_HAS_SR_TB = BIT(1), SNOR_F_NO_OP_CHIP_ERASE = BIT(2), - SNOR_F_S3AN_ADDR_DEFAULT = BIT(3), - SNOR_F_READY_XSR_RDY = BIT(4), - SNOR_F_USE_CLSR = BIT(5), - SNOR_F_BROKEN_RESET = BIT(6), - SNOR_F_4B_OPCODES = BIT(7), - SNOR_F_HAS_4BAIT = BIT(8), + SNOR_F_READY_XSR_RDY = BIT(3), + SNOR_F_USE_CLSR = BIT(4), + SNOR_F_BROKEN_RESET = BIT(5), + SNOR_F_4B_OPCODES = BIT(6), + SNOR_F_HAS_4BAIT = BIT(7), + SNOR_F_HAS_LOCK = BIT(8), }; /** @@ -333,130 +333,6 @@ struct spi_nor_erase_map { u8 uniform_erase_type; }; -/** - * struct flash_info - Forward declaration of a structure used internally by - * spi_nor_scan() - */ -struct flash_info; - -/** - * struct spi_nor - Structure for defining a the SPI NOR layer - * @mtd: point to a mtd_info structure - * @lock: the lock for the read/write/erase/lock/unlock operations - * @dev: point to a spi device, or a spi nor controller device. - * @info: spi-nor part JDEC MFR id and other info - * @page_size: the page size of the SPI NOR - * @addr_width: number of address bytes - * @erase_opcode: the opcode for erasing a sector - * @read_opcode: the read opcode - * @read_dummy: the dummy needed by the read operation - * @program_opcode: the program opcode - * @sst_write_second: used by the SST write operation - * @flags: flag options for the current SPI-NOR (SNOR_F_*) - * @read_proto: the SPI protocol for read operations - * @write_proto: the SPI protocol for write operations - * @reg_proto the SPI protocol for read_reg/write_reg/erase operations - * @cmd_buf: used by the write_reg - * @erase_map: the erase map of the SPI NOR - * @prepare: [OPTIONAL] do some preparations for the - * read/write/erase/lock/unlock operations - * @unprepare: [OPTIONAL] do some post work after the - * read/write/erase/lock/unlock operations - * @read_reg: [DRIVER-SPECIFIC] read out the register - * @write_reg: [DRIVER-SPECIFIC] write data to the register - * @read: [DRIVER-SPECIFIC] read data from the SPI NOR - * @write: [DRIVER-SPECIFIC] write data to the SPI NOR - * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR - * at the offset @offs; if not provided by the driver, - * spi-nor will send the erase opcode via write_reg() - * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR - * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR - * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is - * @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode - * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from - * the SPI NOR Status Register. - * completely locked - * @priv: the private data - */ -struct spi_nor { - struct mtd_info mtd; - struct mutex lock; - struct device *dev; - const struct flash_info *info; - u32 page_size; - u8 addr_width; - u8 erase_opcode; - u8 read_opcode; - u8 read_dummy; - u8 program_opcode; - enum spi_nor_protocol read_proto; - enum spi_nor_protocol write_proto; - enum spi_nor_protocol reg_proto; - bool sst_write_second; - u32 flags; - u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; - struct spi_nor_erase_map erase_map; - - int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); - void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); - int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); - int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); - - ssize_t (*read)(struct spi_nor *nor, loff_t from, - size_t len, u_char *read_buf); - ssize_t (*write)(struct spi_nor *nor, loff_t to, - size_t len, const u_char *write_buf); - int (*erase)(struct spi_nor *nor, loff_t offs); - - int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); - int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); - int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); - int (*quad_enable)(struct spi_nor *nor); - int (*clear_sr_bp)(struct spi_nor *nor); - - void *priv; -}; - -static u64 __maybe_unused -spi_nor_region_is_last(const struct spi_nor_erase_region *region) -{ - return region->offset & SNOR_LAST_REGION; -} - -static u64 __maybe_unused -spi_nor_region_end(const struct spi_nor_erase_region *region) -{ - return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size; -} - -static void __maybe_unused -spi_nor_region_mark_end(struct spi_nor_erase_region *region) -{ - region->offset |= SNOR_LAST_REGION; -} - -static void __maybe_unused -spi_nor_region_mark_overlay(struct spi_nor_erase_region *region) -{ - region->offset |= SNOR_OVERLAID_REGION; -} - -static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor) -{ - return !!nor->erase_map.uniform_erase_type; -} - -static inline void spi_nor_set_flash_node(struct spi_nor *nor, - struct device_node *np) -{ - mtd_set_of_node(&nor->mtd, np); -} - -static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) -{ - return mtd_get_of_node(&nor->mtd); -} - /** * struct spi_nor_hwcaps - Structure for describing the hardware capabilies * supported by the SPI controller (bus master). @@ -518,6 +394,257 @@ struct spi_nor_hwcaps { #define SNOR_HWCAPS_PP_1_8_8 BIT(21) #define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \ + SNOR_HWCAPS_READ_4_4_4 | \ + SNOR_HWCAPS_READ_8_8_8 | \ + SNOR_HWCAPS_PP_4_4_4 | \ + SNOR_HWCAPS_PP_8_8_8) + +#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \ + SNOR_HWCAPS_READ_1_2_2_DTR | \ + SNOR_HWCAPS_READ_1_4_4_DTR | \ + SNOR_HWCAPS_READ_1_8_8_DTR) + +#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \ + SNOR_HWCAPS_PP_MASK) + +struct spi_nor_read_command { + u8 num_mode_clocks; + u8 num_wait_states; + u8 opcode; + enum spi_nor_protocol proto; +}; + +struct spi_nor_pp_command { + u8 opcode; + enum spi_nor_protocol proto; +}; + +enum spi_nor_read_command_index { + SNOR_CMD_READ, + SNOR_CMD_READ_FAST, + SNOR_CMD_READ_1_1_1_DTR, + + /* Dual SPI */ + SNOR_CMD_READ_1_1_2, + SNOR_CMD_READ_1_2_2, + SNOR_CMD_READ_2_2_2, + SNOR_CMD_READ_1_2_2_DTR, + + /* Quad SPI */ + SNOR_CMD_READ_1_1_4, + SNOR_CMD_READ_1_4_4, + SNOR_CMD_READ_4_4_4, + SNOR_CMD_READ_1_4_4_DTR, + + /* Octal SPI */ + SNOR_CMD_READ_1_1_8, + SNOR_CMD_READ_1_8_8, + SNOR_CMD_READ_8_8_8, + SNOR_CMD_READ_1_8_8_DTR, + + SNOR_CMD_READ_MAX +}; + +enum spi_nor_pp_command_index { + SNOR_CMD_PP, + + /* Quad SPI */ + SNOR_CMD_PP_1_1_4, + SNOR_CMD_PP_1_4_4, + SNOR_CMD_PP_4_4_4, + + /* Octal SPI */ + SNOR_CMD_PP_1_1_8, + SNOR_CMD_PP_1_8_8, + SNOR_CMD_PP_8_8_8, + + SNOR_CMD_PP_MAX +}; + +/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */ +struct spi_nor; + +/** + * struct spi_nor_locking_ops - SPI NOR locking methods + * @lock: lock a region of the SPI NOR. + * @unlock: unlock a region of the SPI NOR. + * @is_locked: check if a region of the SPI NOR is completely locked + */ +struct spi_nor_locking_ops { + int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); +}; + +/** + * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings. + * Includes legacy flash parameters and settings that can be overwritten + * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216 + * Serial Flash Discoverable Parameters (SFDP) tables. + * + * @size: the flash memory density in bytes. + * @page_size: the page size of the SPI NOR flash memory. + * @hwcaps: describes the read and page program hardware + * capabilities. + * @reads: read capabilities ordered by priority: the higher index + * in the array, the higher priority. + * @page_programs: page program capabilities ordered by priority: the + * higher index in the array, the higher priority. + * @erase_map: the erase map parsed from the SFDP Sector Map Parameter + * Table. + * @quad_enable: enables SPI NOR quad mode. + * @set_4byte: puts the SPI NOR in 4 byte addressing mode. + * @convert_addr: converts an absolute address into something the flash + * will understand. Particularly useful when pagesize is + * not a power-of-2. + * @setup: configures the SPI NOR memory. Useful for SPI NOR + * flashes that have peculiarities to the SPI NOR standard + * e.g. different opcodes, specific address calculation, + * page size, etc. + * @locking_ops: SPI NOR locking methods. + */ +struct spi_nor_flash_parameter { + u64 size; + u32 page_size; + + struct spi_nor_hwcaps hwcaps; + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; + + struct spi_nor_erase_map erase_map; + + int (*quad_enable)(struct spi_nor *nor); + int (*set_4byte)(struct spi_nor *nor, bool enable); + u32 (*convert_addr)(struct spi_nor *nor, u32 addr); + int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps); + + const struct spi_nor_locking_ops *locking_ops; +}; + +/** + * struct flash_info - Forward declaration of a structure used internally by + * spi_nor_scan() + */ +struct flash_info; + +/** + * struct spi_nor - Structure for defining a the SPI NOR layer + * @mtd: point to a mtd_info structure + * @lock: the lock for the read/write/erase/lock/unlock operations + * @dev: point to a spi device, or a spi nor controller device. + * @spimem: point to the spi mem device + * @bouncebuf: bounce buffer used when the buffer passed by the MTD + * layer is not DMA-able + * @bouncebuf_size: size of the bounce buffer + * @info: spi-nor part JDEC MFR id and other info + * @page_size: the page size of the SPI NOR + * @addr_width: number of address bytes + * @erase_opcode: the opcode for erasing a sector + * @read_opcode: the read opcode + * @read_dummy: the dummy needed by the read operation + * @program_opcode: the program opcode + * @sst_write_second: used by the SST write operation + * @flags: flag options for the current SPI-NOR (SNOR_F_*) + * @read_proto: the SPI protocol for read operations + * @write_proto: the SPI protocol for write operations + * @reg_proto the SPI protocol for read_reg/write_reg/erase operations + * @prepare: [OPTIONAL] do some preparations for the + * read/write/erase/lock/unlock operations + * @unprepare: [OPTIONAL] do some post work after the + * read/write/erase/lock/unlock operations + * @read_reg: [DRIVER-SPECIFIC] read out the register + * @write_reg: [DRIVER-SPECIFIC] write data to the register + * @read: [DRIVER-SPECIFIC] read data from the SPI NOR + * @write: [DRIVER-SPECIFIC] write data to the SPI NOR + * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR + * at the offset @offs; if not provided by the driver, + * spi-nor will send the erase opcode via write_reg() + * @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from + * the SPI NOR Status Register. + * @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings. + * The structure includes legacy flash parameters and + * settings that can be overwritten by the spi_nor_fixups + * hooks, or dynamically when parsing the SFDP tables. + * @priv: the private data + */ +struct spi_nor { + struct mtd_info mtd; + struct mutex lock; + struct device *dev; + struct spi_mem *spimem; + u8 *bouncebuf; + size_t bouncebuf_size; + const struct flash_info *info; + u32 page_size; + u8 addr_width; + u8 erase_opcode; + u8 read_opcode; + u8 read_dummy; + u8 program_opcode; + enum spi_nor_protocol read_proto; + enum spi_nor_protocol write_proto; + enum spi_nor_protocol reg_proto; + bool sst_write_second; + u32 flags; + + int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); + void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); + int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + + ssize_t (*read)(struct spi_nor *nor, loff_t from, + size_t len, u_char *read_buf); + ssize_t (*write)(struct spi_nor *nor, loff_t to, + size_t len, const u_char *write_buf); + int (*erase)(struct spi_nor *nor, loff_t offs); + + int (*clear_sr_bp)(struct spi_nor *nor); + struct spi_nor_flash_parameter params; + + void *priv; +}; + +static u64 __maybe_unused +spi_nor_region_is_last(const struct spi_nor_erase_region *region) +{ + return region->offset & SNOR_LAST_REGION; +} + +static u64 __maybe_unused +spi_nor_region_end(const struct spi_nor_erase_region *region) +{ + return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size; +} + +static void __maybe_unused +spi_nor_region_mark_end(struct spi_nor_erase_region *region) +{ + region->offset |= SNOR_LAST_REGION; +} + +static void __maybe_unused +spi_nor_region_mark_overlay(struct spi_nor_erase_region *region) +{ + region->offset |= SNOR_OVERLAID_REGION; +} + +static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor) +{ + return !!nor->params.erase_map.uniform_erase_type; +} + +static inline void spi_nor_set_flash_node(struct spi_nor *nor, + struct device_node *np) +{ + mtd_set_of_node(&nor->mtd, np); +} + +static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) +{ + return mtd_get_of_node(&nor->mtd); +} + /** * spi_nor_scan() - scan the SPI NOR * @nor: the spi_nor structure