From 96806229ca033f85310bc5c203410189f8a1d2ee Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 10 Apr 2020 11:13:26 +0100 Subject: [PATCH 1/2] irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling When a vPE is made resident, the GIC starts parsing the virtual pending table to deliver pending interrupts. This takes place asynchronously, and can at times take a long while. Long enough that the vcpu enters the guest and hits WFI before any interrupt has been signaled yet. The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat. In order to avoid the above, a (optional on GICv4, mandatory on v4.1) feature allows the GIC to feedback to the hypervisor whether it is done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit. The hypervisor can then wait until the GIC is ready before actually running the vPE. Plug the detection code as well as polling on vPE schedule. While at it, tidy-up the kernel message that displays the GICv4 optional features. Reviewed-by: Zenghui Yu Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its.c | 19 +++++++++++++++++++ drivers/irqchip/irq-gic-v3.c | 11 +++++++---- include/linux/irqchip/arm-gic-v3.h | 2 ++ 3 files changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 54d142ccc63a..affd325cc3d4 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -3672,6 +3673,20 @@ out: return IRQ_SET_MASK_OK_DONE; } +static void its_wait_vpt_parse_complete(void) +{ + void __iomem *vlpi_base = gic_data_rdist_vlpi_base(); + u64 val; + + if (!gic_rdists->has_vpend_valid_dirty) + return; + + WARN_ON_ONCE(readq_relaxed_poll_timeout(vlpi_base + GICR_VPENDBASER, + val, + !(val & GICR_VPENDBASER_Dirty), + 10, 500)); +} + static void its_vpe_schedule(struct its_vpe *vpe) { void __iomem *vlpi_base = gic_data_rdist_vlpi_base(); @@ -3702,6 +3717,8 @@ static void its_vpe_schedule(struct its_vpe *vpe) val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0; val |= GICR_VPENDBASER_Valid; gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER); + + its_wait_vpt_parse_complete(); } static void its_vpe_deschedule(struct its_vpe *vpe) @@ -3910,6 +3927,8 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe, val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id); gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER); + + its_wait_vpt_parse_complete(); } static void its_vpe_4_1_deschedule(struct its_vpe *vpe, diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 9dbc81b6f62e..d7006ef18a0d 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -873,6 +873,7 @@ static int __gic_update_rdist_properties(struct redist_region *region, gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID); gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) | gic_data.rdists.has_rvpeid); + gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY); /* Detect non-sensical configurations */ if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) { @@ -893,10 +894,11 @@ static void gic_update_rdist_properties(void) if (WARN_ON(gic_data.ppi_nr == UINT_MAX)) gic_data.ppi_nr = 0; pr_info("%d PPIs implemented\n", gic_data.ppi_nr); - pr_info("%sVLPI support, %sdirect LPI support, %sRVPEID support\n", - !gic_data.rdists.has_vlpis ? "no " : "", - !gic_data.rdists.has_direct_lpi ? "no " : "", - !gic_data.rdists.has_rvpeid ? "no " : ""); + if (gic_data.rdists.has_vlpis) + pr_info("GICv4 features: %s%s%s\n", + gic_data.rdists.has_direct_lpi ? "DirectLPI " : "", + gic_data.rdists.has_rvpeid ? "RVPEID " : "", + gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : ""); } /* Check whether it's single security state view */ @@ -1620,6 +1622,7 @@ static int __init gic_init_bases(void __iomem *dist_base, gic_data.rdists.has_rvpeid = true; gic_data.rdists.has_vlpis = true; gic_data.rdists.has_direct_lpi = true; + gic_data.rdists.has_vpend_valid_dirty = true; if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) { err = -ENOMEM; diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 765d9b769b69..6c36b6cc3edf 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -243,6 +243,7 @@ #define GICR_TYPER_PLPIS (1U << 0) #define GICR_TYPER_VLPIS (1U << 1) +#define GICR_TYPER_DIRTY (1U << 2) #define GICR_TYPER_DirectLPIS (1U << 3) #define GICR_TYPER_LAST (1U << 4) #define GICR_TYPER_RVPEID (1U << 7) @@ -686,6 +687,7 @@ struct rdists { bool has_vlpis; bool has_rvpeid; bool has_direct_lpi; + bool has_vpend_valid_dirty; }; struct irq_domain; From 4b2dfe1e7799d0e20b55711dfcc45d2ad35ff46e Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 10 Apr 2020 12:11:39 +0100 Subject: [PATCH 2/2] irqchip/gic-v4.1: Update effective affinity of virtual SGIs Although the vSGIs are not directly visible to the host, they still get moved around by the CPU hotplug, for example. This results in the kernel moaning on the console, such as: genirq: irq_chip GICv4.1-sgi did not update eff. affinity mask of irq 38 Updating the effective affinity on set_affinity() fixes it. Reviewed-by: Zenghui Yu Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index affd325cc3d4..124251b0ccba 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -4054,6 +4054,7 @@ static int its_sgi_set_affinity(struct irq_data *d, * not on the host (since they can only be targetting a vPE). * Tell the kernel we've done whatever it asked for. */ + irq_data_update_effective_affinity(d, mask_val); return IRQ_SET_MASK_OK; }