Merge 6.1-rc6 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -416,6 +416,7 @@ TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
+Tzung-Bi Shih <tzungbi@kernel.org> <tzungbi@google.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Uwe Kleine-König <ukleinek@strlen.de>

CREDITS

@@ -918,6 +918,11 @@ S: Ottawa, Ontario
 S: K1N 6Z9
 S: CANADA
 
+N: Vivien Didelot
+E: vivien.didelot@gmail.com
+D: DSA framework and MV88E6XXX driver
+S: Montreal, Quebec, Canada
+
 N: Jeff Dike
 E: jdike@karaya.com
 W: http://user-mode-linux.sourceforge.net
@@ -2447,6 +2452,10 @@ S: 482 Shadowgraph Dr.
 S: San Jose, CA  95110
 S: USA
 
+N: Michal Marek
+E: michal.lkml@markovi.net
+D: Kbuild Maintainer 2009-2017
+
 N: Martin Mares
 E: mj@ucw.cz
 W: http://www.ucw.cz/~mj/

Documentation/arm64/booting.rst

@@ -340,6 +340,14 @@ Before jumping into the kernel, the following conditions must be met:
     - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
       kernel will execute on.
 
+    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
   For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64)
 
   - If EL3 is present:

Documentation/arm64/cpu-feature-registers.rst

@@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.
 
 The infrastructure emulates only the following system register space::
 
-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@@ -293,6 +293,42 @@ infrastructure:
      | WFXT                         | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
 
 Appendix I: Example
 -------------------

Documentation/dev-tools/kmsan.rst

@@ -67,6 +67,7 @@ uninitialized in the local variable, as well as the stack where the value was
 copied to another memory location before use.
 
 A use of uninitialized value ``v`` is reported by KMSAN in the following cases:
+
  - in a condition, e.g. ``if (v) { ... }``;
  - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``;
  - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``;

Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml

@@ -15,9 +15,22 @@ description:
 
 properties:
   compatible:
-    enum:
+    oneOf:
-      - qcom,sfpb-mutex
+      - enum:
-      - qcom,tcsr-mutex
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -34,9 +47,9 @@ additionalProperties: false
 
 examples:
   - |
-        tcsr_mutex: hwlock@1f40000 {
+    hwlock@1f40000 {
-                compatible = "qcom,tcsr-mutex";
+        compatible = "qcom,tcsr-mutex";
-                reg = <0x01f40000 0x40000>;
+        reg = <0x01f40000 0x40000>;
-                #hwlock-cells = <1>;
+        #hwlock-cells = <1>;
-        };
+    };
 ...

Documentation/devicetree/bindings/input/goodix,gt7375p.yaml

@@ -16,8 +16,11 @@ description:
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
 
   reg:
     enum:

Documentation/devicetree/bindings/net/engleder,tsnep.yaml

@@ -47,7 +47,7 @@ properties:
 
   nvmem-cells: true
 
-  nvmem-cells-names: true
+  nvmem-cell-names: true
 
   phy-connection-type:
     enum:

Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml

@@ -81,6 +81,9 @@ properties:
 
           power-supply: true
 
+          power-domains:
+            maxItems: 1
+
           resets:
             description: |
               A number of phandles to resets that need to be asserted during

Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml

@@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC
 
 maintainers:
   - Cheng-Yi Chiang <cychiang@chromium.org>
-  - Tzung-Bi Shih <tzungbi@google.com>
+  - Tzung-Bi Shih <tzungbi@kernel.org>
 
 description: |
   Google's ChromeOS EC codec is a digital mic codec provided by the

Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Realtek rt1015p codec devicetree bindings
 
 maintainers:
-  - Tzung-Bi Shih <tzungbi@google.com>
+  - Tzung-Bi Shih <tzungbi@kernel.org>
 
 description: |
   Rt1015p is a rt1015 variant which does not support I2C and

Documentation/driver-api/driver-model/devres.rst

@@ -279,6 +279,7 @@ GPIO
   devm_gpio_request_one()
 
 I2C
+  devm_i2c_add_adapter()
   devm_i2c_new_dummy_device()
 
 IIO

Documentation/driver-api/miscellaneous.rst

@@ -16,12 +16,11 @@ Parallel Port Devices
 16x50 UART Driver
 =================
 
-.. kernel-doc:: drivers/tty/serial/serial_core.c
-   :export:
-
 .. kernel-doc:: drivers/tty/serial/8250/8250_core.c
    :export:
 
+See serial/driver.rst for related APIs.
+
 Pulse-Width Modulation (PWM)
 ============================
 

Documentation/kbuild/reproducible-builds.rst

@@ -119,6 +119,16 @@ To avoid this, you can make the vDSO different for different
 kernel versions by including an arbitrary string of "salt" in it.
 This is specified by the Kconfig symbol ``CONFIG_BUILD_SALT``.
 
+Git
+---
+
+Uncommitted changes or different commit ids in git can also lead
+to different compilation results. For example, after executing
+``git reset HEAD^``, even if the code is the same, the
+``include/config/kernel.release`` generated during compilation
+will be different, which will eventually lead to binary differences.
+See ``scripts/setlocalversion`` for details.
+
 .. _KBUILD_BUILD_TIMESTAMP: kbuild.html#kbuild-build-timestamp
 .. _KBUILD_BUILD_USER and KBUILD_BUILD_HOST: kbuild.html#kbuild-build-user-kbuild-build-host
 .. _KCFLAGS: kbuild.html#kcflags

Documentation/kernel-hacking/hacking.rst

@@ -120,7 +120,7 @@ You can tell you are in a softirq (or tasklet) using the
 .. warning::
 
     Beware that this will return a false positive if a
-    :ref:`botton half lock <local_bh_disable>` is held.
+    :ref:`bottom half lock <local_bh_disable>` is held.
 
 Some Basic Rules
 ================

Documentation/process/2.Process.rst

@@ -126,17 +126,10 @@ than one development cycle past their initial release. So, for example, the
 5.2.21 was the final stable update of the 5.2 release.
 
 Some kernels are designated "long term" kernels; they will receive support
-for a longer period.  As of this writing, the current long term kernels
+for a longer period.  Please refer to the following link for the list of active
-and their maintainers are:
+long term kernel versions and their maintainers:
 
-	======  ================================	=======================
+	https://www.kernel.org/category/releases.html
-	3.16	Ben Hutchings				(very long-term kernel)
-	4.4	Greg Kroah-Hartman & Sasha Levin	(very long-term kernel)
-	4.9	Greg Kroah-Hartman & Sasha Levin
-	4.14	Greg Kroah-Hartman & Sasha Levin
-	4.19	Greg Kroah-Hartman & Sasha Levin
-	5.4	Greg Kroah-Hartman & Sasha Levin
-	======  ================================	=======================
 
 The selection of a kernel for long-term support is purely a matter of a
 maintainer having the need and the time to maintain that release.  There

Documentation/process/code-of-conduct-interpretation.rst

@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

Documentation/process/howto.rst

@@ -36,7 +36,7 @@ experience, the following books are good for, if anything, reference:
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
 The kernel is written using GNU C and the GNU toolchain.  While it
-adheres to the ISO C89 standard, it uses a number of extensions that are
+adheres to the ISO C11 standard, it uses a number of extensions that are
 not featured in the standard.  The kernel is a freestanding C
 environment, with no reliance on the standard C library, so some
 portions of the C standard are not supported.  Arbitrary long long

Documentation/trace/histogram.rst

@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.

Documentation/translations/it_IT/process/howto.rst

@@ -44,7 +44,7 @@ altro, utili riferimenti:
 - "C:  A Reference Manual" di Harbison and Steele [Prentice Hall]
 
 Il kernel è stato scritto usando GNU C e la toolchain GNU.
-Sebbene si attenga allo standard ISO C89, esso utilizza una serie di
+Sebbene si attenga allo standard ISO C11, esso utilizza una serie di
 estensioni che non sono previste in questo standard. Il kernel è un
 ambiente C indipendente, che non ha alcuna dipendenza dalle librerie
 C standard, così alcune parti del C standard non sono supportate.

Documentation/translations/ja_JP/howto.rst

@@ -65,7 +65,7 @@ Linux カーネル開発のやり方
  - 『新・詳説 C 言語 H&S リファレンス』 (サミュエル P ハービソン/ガイ L スティール共著 斉藤 信男監訳)[ソフトバンク]
 
 カーネルは GNU C と GNU ツールチェインを使って書かれています。カーネル
-は ISO C89 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
+は ISO C11 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
 います。カーネルは標準 C ライブラリに依存しない、C 言語非依存環境です。
 そのため、C の標準の中で使えないものもあります。特に任意の long long
 の除算や浮動小数点は使えません。カーネルがツールチェインや C 言語拡張

Documentation/translations/ko_KR/howto.rst

@@ -62,7 +62,7 @@ Documentation/process/howto.rst
  - "Practical C Programming" by Steve Oualline [O'Reilly]
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
-커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을
+커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C11 표준을
 따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C
 라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는
 지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다.

Documentation/translations/zh_CN/process/howto.rst

@@ -45,7 +45,7 @@ Linux内核大部分是由C语言写成的，一些体系结构相关的代码
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C语言参考手册（原书第5版）》（邱仲潘 等译）[机械工业出版社]
 
-Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C89标准，但也用到了一些
+Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C11标准，但也用到了一些
 标准中没有定义的扩展。内核是自给自足的C环境，不依赖于标准C库的支持，所以
 并不支持C标准中的部分定义。比如long long类型的大数除法和浮点运算就不允许
 使用。有时候确实很难弄清楚内核对工具链的要求和它所使用的扩展，不幸的是目

Documentation/translations/zh_TW/process/howto.rst

@@ -48,7 +48,7 @@ Linux內核大部分是由C語言寫成的，一些體系結構相關的代碼
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C語言參考手冊（原書第5版）》（邱仲潘 等譯）[機械工業出版社]
 
-Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C89標準，但也用到了一些
+Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C11標準，但也用到了一些
 標準中沒有定義的擴展。內核是自給自足的C環境，不依賴於標準C庫的支持，所以
 並不支持C標準中的部分定義。比如long long類型的大數除法和浮點運算就不允許
 使用。有時候確實很難弄清楚內核對工具鏈的要求和它所使用的擴展，不幸的是目

Documentation/virt/kvm/devices/vm.rst

@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT).
 :Parameters: address of a buffer in user space to store the data (u8) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
 -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64).
 
 :Parameters: address of a buffer in user space to store the data (u64) to
 :Returns:    -EFAULT if the given address is not accessible from kernel space
+	     -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
 -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0.
 	     (kvm_s390_vm_tod_clock) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 4. GROUP: KVM_S390_VM_CRYPTO
 ============================

MAINTAINERS

@@ -2197,7 +2197,7 @@ M:	Wei Xu <xuwei5@hisilicon.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 W:	http://www.hisilicon.com
-T:	git git://github.com/hisilicon/linux-hisi.git
+T:	git https://github.com/hisilicon/linux-hisi.git
 F:	arch/arm/boot/dts/hi3*
 F:	arch/arm/boot/dts/hip*
 F:	arch/arm/boot/dts/hisi*
@@ -3984,7 +3984,7 @@ M:	Rafał Miłecki <rafal@milecki.pl>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
 F:	arch/arm64/boot/dts/broadcom/bcmbca/*
 N:	bcmbca
@@ -4009,7 +4009,7 @@ R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
@@ -4023,7 +4023,7 @@ M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 S:	Maintained
-T:	git git://github.com/broadcom/mach-bcm
+T:	git https://github.com/broadcom/mach-bcm
 F:	arch/arm/mach-bcm/
 N:	bcm281*
 N:	bcm113*
@@ -4088,7 +4088,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	arch/arm/include/asm/hardware/cache-b15-rac.h
@@ -4121,7 +4121,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/mips/bmips/*
 F:	arch/mips/boot/dts/brcm/bcm*.dts*
 F:	arch/mips/include/asm/mach-bmips/*
@@ -4262,7 +4262,7 @@ M:	Scott Branden <sbranden@broadcom.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	arch/arm64/boot/dts/broadcom/northstar2/*
 F:	arch/arm64/boot/dts/broadcom/stingray/*
 F:	drivers/clk/bcm/clk-ns*
@@ -4332,7 +4332,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git git://github.com/broadcom/stblinux.git
+T:	git https://github.com/broadcom/stblinux.git
 F:	drivers/soc/bcm/bcm63xx/bcm-pmb.c
 F:	include/dt-bindings/soc/bcm-pmb.h
 
@@ -4809,7 +4809,7 @@ R:	Jeff Layton <jlayton@kernel.org>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://github.com/ceph/ceph-client.git
+T:	git https://github.com/ceph/ceph-client.git
 F:	include/linux/ceph/
 F:	include/linux/crush/
 F:	net/ceph/
@@ -4821,7 +4821,7 @@ R:	Jeff Layton <jlayton@kernel.org>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://github.com/ceph/ceph-client.git
+T:	git https://github.com/ceph/ceph-client.git
 F:	Documentation/filesystems/ceph.rst
 F:	fs/ceph/
 
@@ -4911,7 +4911,7 @@ F:	drivers/platform/chrome/
 
 CHROMEOS EC CODEC DRIVER
 M:	Cheng-Yi Chiang <cychiang@chromium.org>
-M:	Tzung-Bi Shih <tzungbi@google.com>
+M:	Tzung-Bi Shih <tzungbi@kernel.org>
 R:	Guenter Roeck <groeck@chromium.org>
 L:	chrome-platform@lists.linux.dev
 S:	Maintained
@@ -5041,7 +5041,7 @@ F:	drivers/scsi/snic/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Govindarajulu Varadarajan <_govind@gmx.com>
+M:	Satish Kharat <satishkh@cisco.com>
 S:	Supported
 F:	drivers/net/ethernet/cisco/enic/
 
@@ -8602,8 +8602,8 @@ F:	include/asm-generic/
 F:	include/uapi/asm-generic/
 
 GENERIC PHY FRAMEWORK
-M:	Kishon Vijay Abraham I <kishon@ti.com>
 M:	Vinod Koul <vkoul@kernel.org>
+M:	Kishon Vijay Abraham I <kishon@kernel.org>
 L:	linux-phy@lists.infradead.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-phy/list/
@@ -9217,7 +9217,7 @@ W:	https://www.hisilicon.com
 F:	drivers/i2c/busses/i2c-hisi.c
 
 HISILICON LPC BUS DRIVER
-M:	john.garry@huawei.com
+M:	Jay Fang <f.fangjian@huawei.com>
 S:	Maintained
 W:	http://www.hisilicon.com
 F:	Documentation/devicetree/bindings/arm/hisilicon/low-pin-count.yaml
@@ -9341,7 +9341,7 @@ S:	Maintained
 F:	drivers/crypto/hisilicon/trng/trng.c
 
 HISILICON V3XX SPI NOR FLASH Controller Driver
-M:	John Garry <john.garry@huawei.com>
+M:	Jay Fang <f.fangjian@huawei.com>
 S:	Maintained
 W:	http://www.hisilicon.com
 F:	drivers/spi/spi-hisi-sfc-v3xx.c
@@ -9507,7 +9507,6 @@ F:	drivers/media/i2c/hi847.c
 Hyper-V/Azure CORE AND DRIVERS
 M:	"K. Y. Srinivasan" <kys@microsoft.com>
 M:	Haiyang Zhang <haiyangz@microsoft.com>
-M:	Stephen Hemminger <sthemmin@microsoft.com>
 M:	Wei Liu <wei.liu@kernel.org>
 M:	Dexuan Cui <decui@microsoft.com>
 L:	linux-hyperv@vger.kernel.org
@@ -9778,7 +9777,10 @@ S:	Supported
 F:	drivers/pci/hotplug/rpaphp*
 
 IBM Power SRIOV Virtual NIC Device Driver
-M:	Dany Madden <drt@linux.ibm.com>
+M:	Haren Myneni <haren@linux.ibm.com>
+M:	Rick Lindsley <ricklind@linux.ibm.com>
+R:	Nick Child <nnac123@linux.ibm.com>
+R:	Dany Madden <danymadden@us.ibm.com>
 R:	Thomas Falcon <tlfalcon@linux.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -11033,6 +11035,7 @@ KCONFIG
 M:	Masahiro Yamada <masahiroy@kernel.org>
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-kbuild/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kconfig
 F:	Documentation/kbuild/kconfig*
 F:	scripts/Kconfig.include
@@ -11090,10 +11093,12 @@ F:	fs/autofs/
 
 KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
 M:	Masahiro Yamada <masahiroy@kernel.org>
-M:	Michal Marek <michal.lkml@markovi.net>
+R:	Nathan Chancellor <nathan@kernel.org>
 R:	Nick Desaulniers <ndesaulniers@google.com>
+R:	Nicolas Schier <nicolas@fjasle.eu>
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-kbuild/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
 F:	Documentation/kbuild/
 F:	Makefile
@@ -11248,7 +11253,7 @@ L:	kvm@vger.kernel.org
 L:	kvm-riscv@lists.infradead.org
 L:	linux-riscv@lists.infradead.org
 S:	Maintained
-T:	git git://github.com/kvm-riscv/linux.git
+T:	git https://github.com/kvm-riscv/linux.git
 F:	arch/riscv/include/asm/kvm*
 F:	arch/riscv/include/uapi/asm/kvm*
 F:	arch/riscv/kvm/
@@ -12223,7 +12228,6 @@ F:	arch/mips/boot/dts/img/pistachio*
 
 MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Vivien Didelot <vivien.didelot@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -13624,6 +13628,12 @@ S:	Supported
 F:	drivers/misc/atmel-ssc.c
 F:	include/linux/atmel-ssc.h
 
+MICROCHIP SOC DRIVERS
+M:	Conor Dooley <conor@kernel.org>
+S:	Supported
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F:	drivers/soc/microchip/
+
 MICROCHIP USB251XB DRIVER
 M:	Richard Leitner <richard.leitner@skidata.com>
 L:	linux-usb@vger.kernel.org
@@ -14321,7 +14331,6 @@ F:	drivers/net/wireless/
 
 NETWORKING [DSA]
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Vivien Didelot <vivien.didelot@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Vladimir Oltean <olteanv@gmail.com>
 S:	Maintained
@@ -15630,7 +15639,7 @@ F:	drivers/input/serio/gscps2.c
 F:	drivers/input/serio/hp_sdc*
 F:	drivers/parisc/
 F:	drivers/parport/parport_gsc.*
-F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/tty/serial/8250/8250_parisc.c
 F:	drivers/video/console/sti*
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/logo/logo_parisc*
@@ -17222,7 +17231,7 @@ R:	Dongsheng Yang <dongsheng.yang@easystack.cn>
 L:	ceph-devel@vger.kernel.org
 S:	Supported
 W:	http://ceph.com/
-T:	git git://github.com/ceph/ceph-client.git
+T:	git https://github.com/ceph/ceph-client.git
 F:	Documentation/ABI/testing/sysfs-bus-rbd
 F:	drivers/block/rbd.c
 F:	drivers/block/rbd_types.h
@@ -17723,7 +17732,7 @@ F:	arch/riscv/
 N:	riscv
 K:	riscv
 
-RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
+RISC-V MICROCHIP FPGA SUPPORT
 M:	Conor Dooley <conor.dooley@microchip.com>
 M:	Daire McNamara <daire.mcnamara@microchip.com>
 L:	linux-riscv@lists.infradead.org
@@ -17741,17 +17750,26 @@ F:	Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
 F:	arch/riscv/boot/dts/microchip/
 F:	drivers/char/hw_random/mpfs-rng.c
 F:	drivers/clk/microchip/clk-mpfs.c
-F:	drivers/i2c/busses/i2c-microchip-core.c
+F:	drivers/i2c/busses/i2c-microchip-corei2c.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
 F:	drivers/reset/reset-mpfs.c
 F:	drivers/rtc/rtc-mpfs.c
-F:	drivers/soc/microchip/
+F:	drivers/soc/microchip/mpfs-sys-controller.c
 F:	drivers/spi/spi-microchip-core-qspi.c
 F:	drivers/spi/spi-microchip-core.c
 F:	drivers/usb/musb/mpfs.c
 F:	include/soc/microchip/mpfs.h
 
+RISC-V MISC SOC SUPPORT
+M:	Conor Dooley <conor@kernel.org>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+Q:	https://patchwork.kernel.org/project/linux-riscv/list/
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F:	Documentation/devicetree/bindings/riscv/
+F:	arch/riscv/boot/dts/
+
 RNBD BLOCK DRIVERS
 M:	Md. Haris Iqbal <haris.iqbal@ionos.com>
 M:	Jack Wang <jinpu.wang@ionos.com>
@@ -18778,7 +18796,6 @@ M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
-T:	git https://github.com/sifive/riscv-linux.git
 N:	sifive
 K:	[^@]sifive
 
@@ -18797,6 +18814,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
 F:	drivers/dma/sf-pdma/
 
+SIFIVE SOC DRIVERS
+M:	Conor Dooley <conor@kernel.org>
+L:	linux-riscv@lists.infradead.org
+S:	Maintained
+T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
+F:	drivers/soc/sifive/
+
 SILEAD TOUCHSCREEN DRIVER
 M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-input@vger.kernel.org
@@ -19598,6 +19622,11 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/ethernet/adaptec/starfire*
 
+STARFIVE DEVICETREES
+M:	Emil Renner Berthing <kernel@esmil.dk>
+S:	Maintained
+F:	arch/riscv/boot/dts/starfive/
+
 STARFIVE JH7100 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 S:	Maintained

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
@@ -1218,7 +1218,7 @@ quiet_cmd_ar_vmlinux.a = AR      $@
       cmd_ar_vmlinux.a = \
 	rm -f $@; \
 	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
-	$(AR) mPiT $$($(AR) t $@ | head -n1) $@ $$($(AR) t $@ | grep -F --file=$(srctree)/scripts/head-object-list.txt)
+	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
 
 targets += vmlinux.a
 vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt autoksyms_recursive FORCE

arch/arm/boot/dts/imx6q-yapp4-crux.dts

@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw5910.dtsi

@@ -29,7 +29,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 

arch/arm/boot/dts/imx6qdl-gw5913.dtsi

@@ -26,7 +26,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 

arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts

@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };

arch/arm/boot/dts/imx7s.dtsi

@@ -1270,10 +1270,10 @@
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/lan966x-pcb8291.dts

@@ -69,6 +69,12 @@
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };

arch/arm/boot/dts/sama7g5-pinfunc.h

@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)

arch/arm/boot/dts/ste-href.dtsi

@@ -24,6 +24,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-snowball.dts

@@ -28,6 +28,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts

@@ -44,6 +44,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-codina.dts

@@ -57,6 +57,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-gavini.dts

@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-golden.dts

@@ -35,6 +35,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-janice.dts

@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-kyle.dts

@@ -34,6 +34,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-skomer.dts

@@ -30,6 +30,14 @@
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/mach-at91/pm_suspend.S

@@ -169,10 +169,15 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
 
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
 	/* Disable DX DLLs. */
 	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
 	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -751,12 +751,26 @@
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		soc {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		big_cluster_thermal_zone: big-cluster {

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi

@@ -779,6 +779,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +791,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -532,6 +532,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -541,6 +544,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -1385,6 +1385,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1398,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi

@@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
-		clock-names = "ipg", "per", "ahb";
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts

@@ -250,21 +250,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */

arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts

@@ -34,11 +34,25 @@
 		off-on-delay-us = <12000>;
 	};
 
-	extcon_usbotg1: extcon-usbotg1 {
+	connector {
-		compatible = "linux,extcon-usb-gpio";
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1_extcon>;
+		pinctrl-0 = <&pinctrl_usb1_connector>;
-		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 };
 
@@ -105,13 +119,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
-	extcon = <&extcon_usbotg1>;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
 	power-active-high;
 	over-current-active-low;
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 &usbotg2 {
@@ -231,7 +251,7 @@
 			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
-	pinctrl_usb1_extcon: usb1-extcongrp {
+	pinctrl_usb1_connector: usb1-connectorgrp {
 		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -276,6 +276,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 
 	usbphynop2: usbphynop2 {
@@ -285,6 +286,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};
 
 	soc: soc@0 {
@@ -674,13 +676,11 @@
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@4 {
@@ -1186,7 +1186,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1206,7 +1206,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1244,10 +1244,10 @@
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -662,7 +662,6 @@
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@2 {
@@ -1076,7 +1075,7 @@
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1103,7 +1102,7 @@
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1175,5 +1174,6 @@
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi

@@ -354,16 +354,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -432,6 +422,16 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };
 
 /* On-module I2C */

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -451,7 +451,7 @@
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
 				 <&clk IMX93_CLK_GPIO2_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 32 32>;
+			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
 		gpio3: gpio@43820080 {
@@ -465,7 +465,8 @@
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
 				 <&clk IMX93_CLK_GPIO3_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 64 32>;
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
 		gpio4: gpio@43830080 {
@@ -479,7 +480,7 @@
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
 				 <&clk IMX93_CLK_GPIO4_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 96 32>;
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
 		gpio1: gpio@47400080 {
@@ -493,7 +494,7 @@
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
 				 <&clk IMX93_CLK_GPIO1_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 0 32>;
+			gpio-ranges = <&iomuxc 0 92 16>;
 		};
 
 		s4muap: mailbox@47520000 {
@@ -501,7 +502,7 @@
 			reg = <0x47520000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "txirq", "rxirq";
+			interrupt-names = "tx", "rx";
 			#mbox-cells = <2>;
 		};
 

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -668,7 +668,7 @@
 
 		apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global";
-			reg = <0x0b111000 0x6000>;
+			reg = <0x0b111000 0x1000>;
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -3504,7 +3504,7 @@
 		};
 
 		saw3: syscon@9a10000 {
-			compatible = "qcom,tcsr-msm8996", "syscon";
+			compatible = "syscon";
 			reg = <0x09a10000 0x1000>;
 		};
 

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -43,7 +43,6 @@
 
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-allow-set-load;
 
 		vin-supply = <&vreg_3p3>;
 	};
@@ -137,6 +136,9 @@
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sa8295p-adp.dts

@@ -83,6 +83,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4c: ldo4 {
@@ -98,6 +101,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c: ldo7 {
@@ -113,6 +119,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l17c: ldo17 {
@@ -121,6 +130,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -2296,7 +2296,8 @@
 
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
-			reg = <0 0x03300000 0 0x30000>;
+			reg = <0 0x03300000 0 0x30000>,
+			      <0 0x032a9000 0 0x1000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 			       <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
 			clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";

arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

@@ -124,6 +124,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13c: ldo13 {
@@ -146,6 +149,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l4d: ldo4 {

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -885,13 +885,13 @@
 
 		ufs_mem_phy: phy@1d87000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0xe10>;
+			reg = <0 0x01d87000 0 0x1c8>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
 			resets = <&ufs_mem_hc 0>;
@@ -953,13 +953,13 @@
 
 		ufs_card_phy: phy@1da7000 {
 			compatible = "qcom,sc8280xp-qmp-ufs-phy";
-			reg = <0 0x01da7000 0 0xe10>;
+			reg = <0 0x01da7000 0 0x1c8>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			clock-names = "ref",
 				      "ref_aux";
-			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+			clocks = <&gcc GCC_UFS_REF_CLKREF_CLK>,
 				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
 
 			resets = <&ufs_card_hc 0>;
@@ -1181,26 +1181,16 @@
 			usb_0_ssphy: usb3-phy@88eb400 {
 				reg = <0 0x088eb400 0 0x100>,
 				      <0 0x088eb600 0 0x3ec>,
-				      <0 0x088ec400 0 0x1f0>,
+				      <0 0x088ec400 0 0x364>,
 				      <0 0x088eba00 0 0x100>,
 				      <0 0x088ebc00 0 0x3ec>,
-				      <0 0x088ec700 0 0x64>;
+				      <0 0x088ec200 0 0x18>;
 				#phy-cells = <0>;
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
 				clock-names = "pipe0";
 				clock-output-names = "usb0_phy_pipe_clk_src";
 			};
-
-			usb_0_dpphy: dp-phy@88ed200 {
-				reg = <0 0x088ed200 0 0x200>,
-				      <0 0x088ed400 0 0x200>,
-				      <0 0x088eda00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		usb_1_hsphy: phy@8902000 {
@@ -1242,8 +1232,8 @@
 
 			usb_1_ssphy: usb3-phy@8903400 {
 				reg = <0 0x08903400 0 0x100>,
-				      <0 0x08903c00 0 0x3ec>,
+				      <0 0x08903600 0 0x3ec>,
-				      <0 0x08904400 0 0x1f0>,
+				      <0 0x08904400 0 0x364>,
 				      <0 0x08903a00 0 0x100>,
 				      <0 0x08903c00 0 0x3ec>,
 				      <0 0x08904200 0 0x18>;
@@ -1253,16 +1243,6 @@
 				clock-names = "pipe0";
 				clock-output-names = "usb1_phy_pipe_clk_src";
 			};
-
-			usb_1_dpphy: dp-phy@8904200 {
-				reg = <0 0x08904200 0 0x200>,
-				      <0 0x08904400 0 0x200>,
-				      <0 0x08904a00 0 0x200>,
-				      <0 0x08904600 0 0x200>,
-				      <0 0x08904800 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
 		};
 
 		system-cache-controller@9200000 {

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi

@@ -348,6 +348,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_3p0: ldo7 {
@@ -367,6 +370,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

@@ -317,6 +317,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_2p85: ldo7 {
@@ -339,6 +342,9 @@
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -334,6 +334,7 @@
 				exit-latency-us = <6562>;
 				min-residency-us = <9987>;
 				local-timer-stop;
+				status = "disabled";
 			};
 		};
 	};

arch/arm64/boot/dts/qcom/sm8350-hdk.dts

@@ -107,6 +107,9 @@
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l6b_1p2: ldo6 {
@@ -115,6 +118,9 @@
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7b_2p96: ldo7 {
@@ -123,6 +129,9 @@
 			regulator-max-microvolt = <2504000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l9b_1p2: ldo9 {
@@ -131,6 +140,9 @@
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 

arch/arm64/include/asm/cputype.h

@@ -41,7 +41,7 @@
 	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
 
 #define MIDR_CPU_MODEL(imp, partnum) \
-	(((imp)			<< MIDR_IMPLEMENTOR_SHIFT) | \
+	((_AT(u32, imp)		<< MIDR_IMPLEMENTOR_SHIFT) | \
 	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
 	((partnum)		<< MIDR_PARTNUM_SHIFT))
 

arch/arm64/include/asm/efi.h

@@ -14,8 +14,16 @@
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
 #else
 #define efi_init()
+
+static inline
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	return false;
+}
 #endif
 
 int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);

arch/arm64/include/asm/pgtable.h

@@ -863,12 +863,12 @@ static inline bool pte_user_accessible_page(pte_t pte)
 
 static inline bool pmd_user_accessible_page(pmd_t pmd)
 {
-	return pmd_present(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
+	return pmd_leaf(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
 }
 
 static inline bool pud_user_accessible_page(pud_t pud)
 {
-	return pud_present(pud) && pud_user(pud);
+	return pud_leaf(pud) && pud_user(pud);
 }
 #endif
 

arch/arm64/include/asm/syscall_wrapper.h

@@ -8,7 +8,7 @@
 #ifndef __ASM_SYSCALL_WRAPPER_H
 #define __ASM_SYSCALL_WRAPPER_H
 
-struct pt_regs;
+#include <asm/ptrace.h>
 
 #define SC_ARM64_REGS_TO_ARGS(x, ...)				\
 	__MAP(x,__SC_ARGS					\

arch/arm64/kernel/cpufeature.c

@@ -428,6 +428,30 @@ static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	ARM64_FTR_END,
 };
 
+static const struct arm64_ftr_bits ftr_mvfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPROUND_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSHVEC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSQRT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDIVIDE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPTRAP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPDP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_FPSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_SIMD_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_mvfr1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDFMAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDINT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_SIMDLS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPDNAN_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_FPFTZ_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static const struct arm64_ftr_bits ftr_mvfr2[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_FPMISC_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_SIMDMISC_SHIFT, 4, 0),
@@ -458,10 +482,10 @@ static const struct arm64_ftr_bits ftr_id_isar0[] = {
 
 static const struct arm64_ftr_bits ftr_id_isar5[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_RDM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_CRC32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_CRC32_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SHA1_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_AES_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_SEVL_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@@ -574,7 +598,7 @@ static const struct arm64_ftr_bits ftr_smcr[] = {
  * Common ftr bits for a 32bit register with all hidden, strict
  * attributes, with 4bit feature fields and a default safe value of
  * 0. Covers the following 32bit registers:
- * id_isar[1-4], id_mmfr[1-3], id_pfr1, mvfr[0-1]
+ * id_isar[1-3], id_mmfr[1-3]
  */
 static const struct arm64_ftr_bits ftr_generic_32bits[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
@@ -645,8 +669,8 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG(SYS_ID_ISAR6_EL1, ftr_id_isar6),
 
 	/* Op1 = 0, CRn = 0, CRm = 3 */
-	ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_mvfr0),
-	ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_mvfr1),
 	ARM64_FTR_REG(SYS_MVFR2_EL1, ftr_mvfr2),
 	ARM64_FTR_REG(SYS_ID_PFR2_EL1, ftr_id_pfr2),
 	ARM64_FTR_REG(SYS_ID_DFR1_EL1, ftr_id_dfr1),
@@ -3339,7 +3363,7 @@ static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *c
 
 /*
  * We emulate only the following system register space.
- * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 4 - 7]
+ * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 2 - 7]
  * See Table C5-6 System instruction encodings for System register accesses,
  * ARMv8 ARM(ARM DDI 0487A.f) for more details.
  */
@@ -3349,7 +3373,7 @@ static inline bool __attribute_const__ is_emulated(u32 id)
 		sys_reg_CRn(id) == 0x0 &&
 		sys_reg_Op1(id) == 0x0 &&
 		(sys_reg_CRm(id) == 0 ||
-		 ((sys_reg_CRm(id) >= 4) && (sys_reg_CRm(id) <= 7))));
+		 ((sys_reg_CRm(id) >= 2) && (sys_reg_CRm(id) <= 7))));
 }
 
 /*

arch/arm64/kernel/efi-rt-wrapper.S

@@ -6,7 +6,7 @@
 #include <linux/linkage.h>
 
 SYM_FUNC_START(__efi_rt_asm_wrapper)
-	stp	x29, x30, [sp, #-32]!
+	stp	x29, x30, [sp, #-112]!
 	mov	x29, sp
 
 	/*
@@ -16,6 +16,20 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	 */
 	stp	x1, x18, [sp, #16]
 
+	/*
+	 * Preserve all callee saved registers and record the stack pointer
+	 * value in a per-CPU variable so we can recover from synchronous
+	 * exceptions occurring while running the firmware routines.
+	 */
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	adr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
+	str		x29, [x8]
+
 	/*
 	 * We are lucky enough that no EFI runtime services take more than
 	 * 5 arguments, so all are passed in registers rather than via the
@@ -31,7 +45,7 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 
 	ldp	x1, x2, [sp, #16]
 	cmp	x2, x18
-	ldp	x29, x30, [sp], #32
+	ldp	x29, x30, [sp], #112
 	b.ne	0f
 	ret
 0:
@@ -45,3 +59,18 @@ SYM_FUNC_START(__efi_rt_asm_wrapper)
 	mov	x18, x2
 	b	efi_handle_corrupted_x18	// tail call
 SYM_FUNC_END(__efi_rt_asm_wrapper)
+
+SYM_FUNC_START(__efi_rt_asm_recover)
+	ldr_this_cpu	x8, __efi_rt_asm_recover_sp, x9
+	mov		sp, x8
+
+	ldp	x0,  x18, [sp, #16]
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+
+	b	efi_handle_runtime_exception
+SYM_FUNC_END(__efi_rt_asm_recover)

arch/arm64/kernel/efi.c

@@ -9,9 +9,18 @@
 
 #include <linux/efi.h>
 #include <linux/init.h>
+#include <linux/percpu.h>
 
 #include <asm/efi.h>
 
+static bool region_is_misaligned(const efi_memory_desc_t *md)
+{
+	if (PAGE_SIZE == EFI_PAGE_SIZE)
+		return false;
+	return !PAGE_ALIGNED(md->phys_addr) ||
+	       !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT);
+}
+
 /*
  * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be
  * executable, everything else can be mapped with the XN bits
@@ -25,14 +34,22 @@ static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
 	if (type == EFI_MEMORY_MAPPED_IO)
 		return PROT_DEVICE_nGnRE;
 
-	if (WARN_ONCE(!PAGE_ALIGNED(md->phys_addr),
+	if (region_is_misaligned(md)) {
-		      "UEFI Runtime regions are not aligned to 64 KB -- buggy firmware?"))
+		static bool __initdata code_is_misaligned;
+
 		/*
-		 * If the region is not aligned to the page size of the OS, we
+		 * Regions that are not aligned to the OS page size cannot be
-		 * can not use strict permissions, since that would also affect
+		 * mapped with strict permissions, as those might interfere
-		 * the mapping attributes of the adjacent regions.
+		 * with the permissions that are needed by the adjacent
+		 * region's mapping. However, if we haven't encountered any
+		 * misaligned runtime code regions so far, we can safely use
+		 * non-executable permissions for non-code regions.
 		 */
-		return pgprot_val(PAGE_KERNEL_EXEC);
+		code_is_misaligned |= (type == EFI_RUNTIME_SERVICES_CODE);
+
+		return code_is_misaligned ? pgprot_val(PAGE_KERNEL_EXEC)
+					  : pgprot_val(PAGE_KERNEL);
+	}
 
 	/* R-- */
 	if ((attr & (EFI_MEMORY_XP | EFI_MEMORY_RO)) ==
@@ -63,19 +80,16 @@ int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 	bool page_mappings_only = (md->type == EFI_RUNTIME_SERVICES_CODE ||
 				   md->type == EFI_RUNTIME_SERVICES_DATA);
 
-	if (!PAGE_ALIGNED(md->phys_addr) ||
+	/*
-	    !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT)) {
+	 * If this region is not aligned to the page size used by the OS, the
-		/*
+	 * mapping will be rounded outwards, and may end up sharing a page
-		 * If the end address of this region is not aligned to page
+	 * frame with an adjacent runtime memory region. Given that the page
-		 * size, the mapping is rounded up, and may end up sharing a
+	 * table descriptor covering the shared page will be rewritten when the
-		 * page frame with the next UEFI memory region. If we create
+	 * adjacent region gets mapped, we must avoid block mappings here so we
-		 * a block entry now, we may need to split it again when mapping
+	 * don't have to worry about splitting them when that happens.
-		 * the next region, and support for that is going to be removed
+	 */
-		 * from the MMU routines. So avoid block mappings altogether in
+	if (region_is_misaligned(md))
-		 * that case.
-		 */
 		page_mappings_only = true;
-	}
 
 	create_pgd_mapping(mm, md->phys_addr, md->virt_addr,
 			   md->num_pages << EFI_PAGE_SHIFT,
@@ -102,6 +116,9 @@ int __init efi_set_mapping_permissions(struct mm_struct *mm,
 	BUG_ON(md->type != EFI_RUNTIME_SERVICES_CODE &&
 	       md->type != EFI_RUNTIME_SERVICES_DATA);
 
+	if (region_is_misaligned(md))
+		return 0;
+
 	/*
 	 * Calling apply_to_page_range() is only safe on regions that are
 	 * guaranteed to be mapped down to pages. Since we are only called
@@ -128,3 +145,28 @@ asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
 	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
 	return s;
 }
+
+asmlinkage DEFINE_PER_CPU(u64, __efi_rt_asm_recover_sp);
+
+asmlinkage efi_status_t __efi_rt_asm_recover(void);
+
+asmlinkage efi_status_t efi_handle_runtime_exception(const char *f)
+{
+	pr_err(FW_BUG "Synchronous exception occurred in EFI runtime service %s()\n", f);
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+	return EFI_ABORTED;
+}
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	 /* Check whether the exception occurred while running the firmware */
+	if (current_work() != &efi_rts_work.work || regs->pc >= TASK_SIZE_64)
+		return false;
+
+	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+	dump_stack();
+
+	regs->pc = (u64)__efi_rt_asm_recover;
+	return true;
+}

arch/arm64/kernel/entry-common.c

@@ -329,7 +329,8 @@ static void cortex_a76_erratum_1463225_svc_handler(void)
 	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0);
 }
 
-static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+static __always_inline bool
+cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
 {
 	if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa))
 		return false;

arch/arm64/kernel/entry-ftrace.S

@@ -299,11 +299,11 @@ SYM_TYPED_FUNC_START(ftrace_stub)
 	ret
 SYM_FUNC_END(ftrace_stub)
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 SYM_TYPED_FUNC_START(ftrace_stub_graph)
 	ret
 SYM_FUNC_END(ftrace_stub_graph)
 
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 /*
  * void return_to_handler(void)
  *

arch/arm64/kvm/hyp/exception.c

@@ -13,6 +13,7 @@
 #include <hyp/adjust_pc.h>
 #include <linux/kvm_host.h>
 #include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>
 
 #if !defined (__KVM_NVHE_HYPERVISOR__) && !defined (__KVM_VHE_HYPERVISOR__)
 #error Hypervisor code only!
@@ -115,7 +116,7 @@ static void enter_exception64(struct kvm_vcpu *vcpu, unsigned long target_mode,
 	new |= (old & PSR_C_BIT);
 	new |= (old & PSR_V_BIT);
 
-	if (kvm_has_mte(vcpu->kvm))
+	if (kvm_has_mte(kern_hyp_va(vcpu->kvm)))
 		new |= PSR_TCO_BIT;
 
 	new |= (old & PSR_DIT_BIT);

arch/arm64/kvm/hyp/include/hyp/switch.h

@@ -87,6 +87,17 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
 	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
+	if (cpus_have_final_cap(ARM64_SME)) {
+		sysreg_clear_set_s(SYS_HFGRTR_EL2,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK,
+				   0);
+		sysreg_clear_set_s(SYS_HFGWTR_EL2,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK,
+				   0);
+	}
 }
 
 static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
@@ -96,6 +107,15 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 	write_sysreg(0, hstr_el2);
 	if (kvm_arm_support_pmu_v3())
 		write_sysreg(0, pmuserenr_el0);
+
+	if (cpus_have_final_cap(ARM64_SME)) {
+		sysreg_clear_set_s(SYS_HFGRTR_EL2, 0,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK);
+		sysreg_clear_set_s(SYS_HFGWTR_EL2, 0,
+				   HFGxTR_EL2_nSMPRI_EL1_MASK |
+				   HFGxTR_EL2_nTPIDR2_EL0_MASK);
+	}
 }
 
 static inline void ___activate_traps(struct kvm_vcpu *vcpu)

arch/arm64/kvm/hyp/nvhe/mem_protect.c

@@ -516,7 +516,7 @@ static enum pkvm_page_state hyp_get_page_state(kvm_pte_t pte)
 	if (!kvm_pte_valid(pte))
 		return PKVM_NOPAGE;
 
-	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
+	return pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
 }
 
 static int __hyp_check_page_state_range(u64 addr, u64 size,

arch/arm64/kvm/hyp/nvhe/switch.c

@@ -55,18 +55,6 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 	write_sysreg(val, cptr_el2);
 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el2);
 
-	if (cpus_have_final_cap(ARM64_SME)) {
-		val = read_sysreg_s(SYS_HFGRTR_EL2);
-		val &= ~(HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			 HFGxTR_EL2_nSMPRI_EL1_MASK);
-		write_sysreg_s(val, SYS_HFGRTR_EL2);
-
-		val = read_sysreg_s(SYS_HFGWTR_EL2);
-		val &= ~(HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			 HFGxTR_EL2_nSMPRI_EL1_MASK);
-		write_sysreg_s(val, SYS_HFGWTR_EL2);
-	}
-
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
 		struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
 
@@ -110,20 +98,6 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 
 	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);
 
-	if (cpus_have_final_cap(ARM64_SME)) {
-		u64 val;
-
-		val = read_sysreg_s(SYS_HFGRTR_EL2);
-		val |= HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			HFGxTR_EL2_nSMPRI_EL1_MASK;
-		write_sysreg_s(val, SYS_HFGRTR_EL2);
-
-		val = read_sysreg_s(SYS_HFGWTR_EL2);
-		val |= HFGxTR_EL2_nTPIDR2_EL0_MASK |
-			HFGxTR_EL2_nSMPRI_EL1_MASK;
-		write_sysreg_s(val, SYS_HFGWTR_EL2);
-	}
-
 	cptr = CPTR_EL2_DEFAULT;
 	if (vcpu_has_sve(vcpu) && (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED))
 		cptr |= CPTR_EL2_TZ;

arch/arm64/kvm/hyp/vhe/switch.c

@@ -63,10 +63,6 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 		__activate_traps_fpsimd32(vcpu);
 	}
 
-	if (cpus_have_final_cap(ARM64_SME))
-		write_sysreg(read_sysreg(sctlr_el2) & ~SCTLR_ELx_ENTP2,
-			     sctlr_el2);
-
 	write_sysreg(val, cpacr_el1);
 
 	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el1);
@@ -88,10 +84,6 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 	 */
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
 
-	if (cpus_have_final_cap(ARM64_SME))
-		write_sysreg(read_sysreg(sctlr_el2) | SCTLR_ELx_ENTP2,
-			     sctlr_el2);
-
 	write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
 
 	if (!arm64_kernel_unmapped_at_el0())

arch/arm64/mm/fault.c

@@ -30,6 +30,7 @@
 #include <asm/bug.h>
 #include <asm/cmpxchg.h>
 #include <asm/cpufeature.h>
+#include <asm/efi.h>
 #include <asm/exception.h>
 #include <asm/daifflags.h>
 #include <asm/debug-monitors.h>
@@ -391,6 +392,9 @@ static void __do_kernel_fault(unsigned long addr, unsigned long esr,
 		msg = "paging request";
 	}
 
+	if (efi_runtime_fixup_exception(regs, msg))
+		return;
+
 	die_kernel_fault(msg, addr, esr, regs);
 }
 

arch/arm64/mm/pageattr.c

@@ -26,7 +26,7 @@ bool can_set_direct_map(void)
 	 * mapped at page granularity, so that it is possible to
 	 * protect/unprotect single pages.
 	 */
-	return rodata_full || debug_pagealloc_enabled() ||
+	return (rodata_enabled && rodata_full) || debug_pagealloc_enabled() ||
 		IS_ENABLED(CONFIG_KFENCE);
 }
 
@@ -102,7 +102,8 @@ static int change_memory_common(unsigned long addr, int numpages,
 	 * If we are manipulating read-only permissions, apply the same
 	 * change to the linear mapping of the pages that back this VM area.
 	 */
-	if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
+	if (rodata_enabled &&
+	    rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
 			    pgprot_val(clear_mask) == PTE_RDONLY)) {
 		for (i = 0; i < area->nr_pages; i++) {
 			__change_memory_common((u64)page_address(area->pages[i]),

arch/mips/alchemy/common/gpiolib.c

@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/gpio-au1300.h>
 

arch/mips/boot/compressed/decompress.c

@@ -9,6 +9,7 @@
 
 #define DISABLE_BRANCH_PROFILING
 
+#define __NO_FORTIFY
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>

arch/mips/include/asm/fw/fw.h

@@ -26,6 +26,6 @@ extern char *fw_getcmdline(void);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);
-extern void fw_init_early_console(char port);
+extern void fw_init_early_console(void);
 
 #endif /* __ASM_FW_H_ */

arch/mips/kernel/jump_label.c

@@ -56,7 +56,7 @@ void arch_jump_label_transform(struct jump_entry *e,
 			 * The branch offset must fit in the instruction's 26
 			 * bit field.
 			 */
-			WARN_ON((offset >= BIT(25)) ||
+			WARN_ON((offset >= (long)BIT(25)) ||
 				(offset < -(long)BIT(25)));
 
 			insn.j_format.opcode = bc6_op;

arch/mips/kernel/relocate_kernel.S

@@ -145,8 +145,7 @@ LEAF(kexec_smp_wait)
  * kexec_args[0..3] are used to prepare register values.
  */
 
-kexec_args:
+EXPORT(kexec_args)
-	EXPORT(kexec_args)
 arg0:	PTR_WD		0x0
 arg1:	PTR_WD		0x0
 arg2:	PTR_WD		0x0
@@ -159,8 +158,7 @@ arg3:	PTR_WD		0x0
  * their registers a0-a3. secondary_kexec_args[0..3] are used
  * to prepare register values.
  */
-secondary_kexec_args:
+EXPORT(secondary_kexec_args)
-	EXPORT(secondary_kexec_args)
 s_arg0: PTR_WD		0x0
 s_arg1: PTR_WD		0x0
 s_arg2: PTR_WD		0x0
@@ -171,19 +169,16 @@ kexec_flag:
 
 #endif
 
-kexec_start_address:
+EXPORT(kexec_start_address)
-	EXPORT(kexec_start_address)
 	PTR_WD		0x0
 	.size		kexec_start_address, PTRSIZE
 
-kexec_indirection_page:
+EXPORT(kexec_indirection_page)
-	EXPORT(kexec_indirection_page)
 	PTR_WD		0
 	.size		kexec_indirection_page, PTRSIZE
 
 relocate_new_kernel_end:
 
-relocate_new_kernel_size:
+EXPORT(relocate_new_kernel_size)
-	EXPORT(relocate_new_kernel_size)
 	PTR_WD		relocate_new_kernel_end - relocate_new_kernel
 	.size		relocate_new_kernel_size, PTRSIZE

arch/mips/loongson64/reset.c

@@ -16,6 +16,7 @@
 #include <asm/bootinfo.h>
 #include <asm/idle.h>
 #include <asm/reboot.h>
+#include <asm/bug.h>
 
 #include <loongson.h>
 #include <boot_param.h>
@@ -159,8 +160,17 @@ static int __init mips_reboot_setup(void)
 
 #ifdef CONFIG_KEXEC
 	kexec_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kexec_argv))
+		return -ENOMEM;
+
 	kdump_argv = kmalloc(KEXEC_ARGV_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kdump_argv))
+		return -ENOMEM;
+
 	kexec_envp = kmalloc(KEXEC_ENVP_SIZE, GFP_KERNEL);
+	if (WARN_ON(!kexec_envp))
+		return -ENOMEM;
+
 	fw_arg1 = KEXEC_ARGV_ADDR;
 	memcpy(kexec_envp, (void *)fw_arg2, KEXEC_ENVP_SIZE);
 

arch/mips/pic32/pic32mzda/early_console.c

@@ -27,7 +27,7 @@
 #define U_BRG(x)	(UART_BASE(x) + 0x40)
 
 static void __iomem *uart_base;
-static char console_port = -1;
+static int console_port = -1;
 
 static int __init configure_uart_pins(int port)
 {
@@ -47,7 +47,7 @@ static int __init configure_uart_pins(int port)
 	return 0;
 }
 
-static void __init configure_uart(char port, int baud)
+static void __init configure_uart(int port, int baud)
 {
 	u32 pbclk;
 
@@ -60,7 +60,7 @@ static void __init configure_uart(char port, int baud)
 		     uart_base + PIC32_SET(U_STA(port)));
 }
 
-static void __init setup_early_console(char port, int baud)
+static void __init setup_early_console(int port, int baud)
 {
 	if (configure_uart_pins(port))
 		return;
@@ -130,16 +130,15 @@ _out:
 	return baud;
 }
 
-void __init fw_init_early_console(char port)
+void __init fw_init_early_console(void)
 {
 	char *arch_cmdline = pic32_getcmdline();
-	int baud = -1;
+	int baud, port;
 
 	uart_base = ioremap(PIC32_BASE_UART, 0xc00);
 
 	baud = get_baud_from_cmdline(arch_cmdline);
-	if (port == -1)
+	port = get_port_from_cmdline(arch_cmdline);
-		port = get_port_from_cmdline(arch_cmdline);
 
 	if (port == -1)
 		port = EARLY_CONSOLE_PORT;

arch/mips/pic32/pic32mzda/init.c

@@ -47,7 +47,7 @@ void __init plat_mem_setup(void)
 		strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 #ifdef CONFIG_EARLY_PRINTK
-	fw_init_early_console(-1);
+	fw_init_early_console();
 #endif
 	pic32_config_init();
 }

arch/parisc/include/asm/hardware.h

@@ -10,12 +10,12 @@
 #define SVERSION_ANY_ID		PA_SVERSION_ANY_ID
 
 struct hp_hardware {
-	unsigned short	hw_type:5;	/* HPHW_xxx */
+	unsigned int	hw_type:8;	/* HPHW_xxx */
-	unsigned short	hversion;
+	unsigned int	hversion:12;
-	unsigned long	sversion:28;
+	unsigned int	sversion:12;
-	unsigned short	opt;
+	unsigned char	opt;
-	const char	name[80];	/* The hardware description */
+	unsigned char	name[59];	/* The hardware description */
-};
+} __packed;
 
 struct parisc_device;
 

arch/parisc/include/uapi/asm/pdc.h

@@ -363,20 +363,25 @@
 
 #if !defined(__ASSEMBLY__)
 
-/* flags of the device_path */
+/* flags for hardware_path */
 #define	PF_AUTOBOOT	0x80
 #define	PF_AUTOSEARCH	0x40
 #define	PF_TIMER	0x0F
 
-struct device_path {		/* page 1-69 */
+struct hardware_path {
-	unsigned char flags;	/* flags see above! */
+	unsigned char flags;	/* see bit definitions below */
-	unsigned char bc[6];	/* bus converter routing info */
+	signed   char bc[6];	/* Bus Converter routing info to a specific */
-	unsigned char mod;
+				/* I/O adaptor (< 0 means none, > 63 resvd) */
-	unsigned int  layers[6];/* device-specific layer-info */
+	signed   char mod;	/* fixed field of specified module */
-} __attribute__((aligned(8))) ;
+};
+
+struct pdc_module_path {	/* page 1-69 */
+	struct hardware_path path;
+	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
+} __attribute__((aligned(8)));
 
 struct pz_device {
-	struct	device_path dp;	/* see above */
+	struct pdc_module_path dp;	/* see above */
 	/* struct	iomod *hpa; */
 	unsigned int hpa;	/* HPA base address */
 	/* char	*spa; */
@@ -611,21 +616,6 @@ struct pdc_initiator { /* PDC_INITIATOR */
 	int mode;
 };
 
-struct hardware_path {
-	char  flags;	/* see bit definitions below */
-	char  bc[6];	/* Bus Converter routing info to a specific */
-			/* I/O adaptor (< 0 means none, > 63 resvd) */
-	char  mod;	/* fixed field of specified module */
-};
-
-/*
- * Device path specifications used by PDC.
- */
-struct pdc_module_path {
-	struct hardware_path path;
-	unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
-};
-
 /* Only used on some pre-PA2.0 boxes */
 struct pdc_memory_map {		/* PDC_MEMORY_MAP */
 	unsigned long hpa;	/* mod's register set address */

arch/parisc/kernel/drivers.c

@@ -882,15 +882,13 @@ void __init walk_central_bus(void)
 			&root);
 }
 
-static void print_parisc_device(struct parisc_device *dev)
+static __init void print_parisc_device(struct parisc_device *dev)
 {
-	char hw_path[64];
+	static int count __initdata;
-	static int count;
 
-	print_pa_hwpath(dev, hw_path);
+	pr_info("%d. %s at %pap { type:%d, hv:%#x, sv:%#x, rev:%#x }",
-	pr_info("%d. %s at %pap [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
+		++count, dev->name, &(dev->hpa.start), dev->id.hw_type,
-		++count, dev->name, &(dev->hpa.start), hw_path, dev->id.hw_type,
+		dev->id.hversion, dev->id.sversion, dev->id.hversion_rev);
-		dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
 
 	if (dev->num_addrs) {
 		int k;
@@ -1079,7 +1077,7 @@ static __init int qemu_print_iodc_data(struct device *lin_dev, void *data)
 
 
 
-static int print_one_device(struct device * dev, void * data)
+static __init int print_one_device(struct device * dev, void * data)
 {
 	struct parisc_device * pdev = to_parisc_device(dev);
 

arch/powerpc/Kconfig

@@ -147,6 +147,7 @@ config PPC
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_OPTIONAL_KERNEL_RWX		if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
+	select ARCH_SPLIT_ARG64			if PPC32
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC	if PPC_BOOK3S || PPC_8xx || 40x
@@ -285,7 +286,7 @@ config PPC
 	#
 
 config PPC_LONG_DOUBLE_128
-	depends on PPC64
+	depends on PPC64 && ALTIVEC
 	def_bool $(success,test "$(shell,echo __LONG_DOUBLE_128__ | $(CC) -E -P -)" = 1)
 
 config PPC_BARRIER_NOSPEC

arch/powerpc/include/asm/syscalls.h

@@ -104,6 +104,13 @@ long sys_ppc_ftruncate64(unsigned int fd, u32 reg4,
 			 unsigned long len1, unsigned long len2);
 long sys_ppc32_fadvise64(int fd, u32 unused, u32 offset1, u32 offset2,
 			 size_t len, int advice);
+long sys_ppc_sync_file_range2(int fd, unsigned int flags,
+			      unsigned int offset1,
+			      unsigned int offset2,
+			      unsigned int nbytes1,
+			      unsigned int nbytes2);
+long sys_ppc_fallocate(int fd, int mode, u32 offset1, u32 offset2,
+		       u32 len1, u32 len2);
 #endif
 #ifdef CONFIG_COMPAT
 long compat_sys_mmap2(unsigned long addr, size_t len,

arch/powerpc/kernel/sys_ppc32.c

@@ -112,7 +112,7 @@ PPC32_SYSCALL_DEFINE6(ppc32_fadvise64,
 				 advice);
 }
 
-COMPAT_SYSCALL_DEFINE6(ppc_sync_file_range2,
+PPC32_SYSCALL_DEFINE6(ppc_sync_file_range2,
 		       int, fd, unsigned int, flags,
 		       unsigned int, offset1, unsigned int, offset2,
 		       unsigned int, nbytes1, unsigned int, nbytes2)
@@ -122,3 +122,14 @@ COMPAT_SYSCALL_DEFINE6(ppc_sync_file_range2,
 
 	return ksys_sync_file_range(fd, offset, nbytes, flags);
 }
+
+#ifdef CONFIG_PPC32
+SYSCALL_DEFINE6(ppc_fallocate,
+		int, fd, int, mode,
+		u32, offset1, u32, offset2, u32, len1, u32, len2)
+{
+	return ksys_fallocate(fd, mode,
+			      merge_64(offset1, offset2),
+			      merge_64(len1, len2));
+}
+#endif

arch/powerpc/kernel/syscalls/syscall.tbl

@@ -394,8 +394,11 @@
 305	common	signalfd			sys_signalfd			compat_sys_signalfd
 306	common	timerfd_create			sys_timerfd_create
 307	common	eventfd				sys_eventfd
-308	common	sync_file_range2		sys_sync_file_range2		compat_sys_ppc_sync_file_range2
+308	32	sync_file_range2		sys_ppc_sync_file_range2	compat_sys_ppc_sync_file_range2
-309	nospu	fallocate			sys_fallocate			compat_sys_fallocate
+308	64	sync_file_range2		sys_sync_file_range2
+308	spu	sync_file_range2		sys_sync_file_range2
+309	32	fallocate			sys_ppc_fallocate		compat_sys_fallocate
+309	64	fallocate			sys_fallocate
 310	nospu	subpage_prot			sys_subpage_prot
 311	32	timerfd_settime			sys_timerfd_settime32
 311	64	timerfd_settime			sys_timerfd_settime

arch/powerpc/kernel/vmlinux.lds.S

@@ -142,7 +142,7 @@ SECTIONS
 #endif
 
 	.data.rel.ro : AT(ADDR(.data.rel.ro) - LOAD_OFFSET) {
-		*(.data.rel.ro*)
+		*(.data.rel.ro .data.rel.ro.*)
 	}
 
 	.branch_lt : AT(ADDR(.branch_lt) - LOAD_OFFSET) {

arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

@@ -3,6 +3,8 @@
 
 #include "fu540-c000.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
 #define RTCCLK_FREQ		1000000
@@ -42,6 +44,42 @@
 		compatible = "gpio-restart";
 		gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-d1 {
+			pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d1";
+		};
+
+		led-d2 {
+			pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d2";
+		};
+
+		led-d3 {
+			pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d3";
+		};
+
+		led-d4 {
+			pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>;
+			active-low;
+			color = <LED_COLOR_ID_GREEN>;
+			max-brightness = <255>;
+			label = "d4";
+		};
+	};
 };
 
 &uart0 {