From 4274ea02d728f3732433782919b32895555df3ca Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 18 Nov 2008 16:50:36 -0800 Subject: [PATCH] Staging: comedi: usbdux: remove checkpatch.pl warnings Fix up and remove almost all of the remaining checkpatch.pl errors and warnings in the usbdux driver. Cc: Bernd Porr Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/usbdux.c | 201 ++++++++++++++---------- 1 file changed, 115 insertions(+), 86 deletions(-) diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 7172f36ecc9c..ac9f34d45de1 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -53,9 +53,11 @@ sampling rate. If you sample two channels you get 4kHz and so on. * 0.94: D/A output should work now with any channel list combinations * 0.95: .owner commented out for kernel vers below 2.4.19 * sanity checks in ai/ao_cmd - * 0.96: trying to get it working with 2.6, moved all memory alloc to comedi's attach final USB IDs - * moved memory allocation completely to the corresponding comedi functions - * firmware upload is by fxload and no longer by comedi (due to enumeration) + * 0.96: trying to get it working with 2.6, moved all memory alloc to comedi's + * attach final USB IDs + * moved memory allocation completely to the corresponding comedi + * functions firmware upload is by fxload and no longer by comedi (due to + * enumeration) * 0.97: USB IDs received, adjusted table * 0.98: SMP, locking, memroy alloc: moved all usb memory alloc * to the usb subsystem and moved all comedi related memory @@ -63,10 +65,12 @@ sampling rate. If you sample two channels you get 4kHz and so on. * | kernel | registration | usbdux-usb | usbdux-comedi | comedi | * 0.99: USB 2.0: changed protocol to isochronous transfer * IRQ transfer is too buggy and too risky in 2.0 - * for the high speed ISO transfer is now a working version available + * for the high speed ISO transfer is now a working version + * available * 0.99b: Increased the iso transfer buffer for high sp.to 10 buffers. Some VIA * chipsets miss out IRQs. Deeper buffering is needed. - * 1.00: full USB 2.0 support for the A/D converter. Now: max 8kHz sampling rate. + * 1.00: full USB 2.0 support for the A/D converter. Now: max 8kHz sampling + * rate. * Firmware vers 1.00 is needed for this. * Two 16 bit up/down/reset counter with a sampling rate of 1kHz * And loads of cleaning up, in particular streamlining the @@ -144,8 +148,10 @@ sampling rate. If you sample two channels you get 4kHz and so on. /* Size of one A/D value */ #define SIZEADIN ((sizeof(int16_t))) -/* Size of the input-buffer IN BYTES */ -/* Always multiple of 8 for 8 microframes which is needed in the highspeed mode */ +/* + * Size of the input-buffer IN BYTES + * Always multiple of 8 for 8 microframes which is needed in the highspeed mode + */ #define SIZEINBUF ((8*SIZEADIN)) /* 16 bytes. */ @@ -356,7 +362,7 @@ static int usbdux_ai_stop(usbduxsub_t *this_usbduxsub, int do_unlink) * This will cancel a running acquisition operation. * This is called by comedi but never from inside the driver. */ -static int usbdux_ai_cancel(comedi_device * dev, comedi_subdevice * s) +static int usbdux_ai_cancel(comedi_device *dev, comedi_subdevice *s) { usbduxsub_t *this_usbduxsub; int res = 0; @@ -444,8 +450,10 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb) return; } - /* at this point we are reasonably sure that nothing dodgy has happened */ - /* are we running a command? */ + /* + * at this point we are reasonably sure that nothing dodgy has happened + * are we running a command? + */ if (unlikely((!(this_usbduxsub->ai_cmd_running)))) { /* * not running a command, do not continue execution if no @@ -652,7 +660,8 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb) break; /* pointer to the DA */ - datap = (&(((int8_t *) urb->transfer_buffer)[i * 3 + 1])); + datap = + (&(((int8_t *)urb->transfer_buffer)[i * 3 + 1])); /* get the data from comedi */ ret = comedi_buf_get(s->async, &temp); datap[0] = temp; @@ -686,7 +695,8 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb) urb->iso_frame_desc[0].offset = 0; urb->iso_frame_desc[0].length = SIZEOUTBUF; urb->iso_frame_desc[0].status = 0; - if ((ret = USB_SUBMIT_URB(urb)) < 0) { + ret = USB_SUBMIT_URB(urb); + if (ret < 0) { dev_err(&urb->dev->dev, "comedi_: ao urb resubm failed in int-cont. " "ret=%d", ret); @@ -818,9 +828,9 @@ static int firmwareUpload(usbduxsub_t *usbduxsub, uint8_t *firmwareBinary, { int ret; - if (!firmwareBinary) { + if (!firmwareBinary) return 0; - } + ret = usbduxsub_stop(usbduxsub); if (ret < 0) { dev_err(&usbduxsub->interface->dev, @@ -878,9 +888,9 @@ static int usbduxsub_submit_OutURBs(usbduxsub_t *usbduxsub) { int i, errFlag; - if (!usbduxsub) { + if (!usbduxsub) return -EFAULT; - } + for (i = 0; i < usbduxsub->numOfOutBuffers; i++) { dev_dbg(&usbduxsub->interface->dev, "comedi_: submitting out-urb[%d]\n", i); @@ -906,9 +916,10 @@ static int usbdux_ai_cmdtest(comedi_device *dev, comedi_subdevice *s, int err = 0, tmp, i; unsigned int tmpTimer; usbduxsub_t *this_usbduxsub = dev->private; - if (!(this_usbduxsub->probed)) { + + if (!(this_usbduxsub->probed)) return -ENODEV; - } + dev_dbg(&this_usbduxsub->interface->dev, "comedi%d: usbdux_ai_cmdtest\n", dev->minor); @@ -947,8 +958,10 @@ static int usbdux_ai_cmdtest(comedi_device *dev, comedi_subdevice *s, if (err) return 1; - /* step 2: make sure trigger sources are unique and mutually compatible */ - /* note that mutual compatiblity is not an issue here */ + /* + * step 2: make sure trigger sources are unique and mutually compatible + * note that mutual compatiblity is not an issue here + */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT && cmd->scan_begin_src != TRIG_TIMER) @@ -960,7 +973,6 @@ static int usbdux_ai_cmdtest(comedi_device *dev, comedi_subdevice *s, return 2; /* step 3: make sure arguments are trivially compatible */ - if (cmd->start_arg != 0) { cmd->start_arg = 0; err++; @@ -984,9 +996,9 @@ static int usbdux_ai_cmdtest(comedi_device *dev, comedi_subdevice *s, */ i = 1; /* find a power of 2 for the number of channels */ - while (i < (cmd->chanlist_len)) { + while (i < (cmd->chanlist_len)) i = i * 2; - } + if (cmd->scan_begin_arg < (1000000 / 8 * i)) { cmd->scan_begin_arg = 1000000 / 8 * i; err++; @@ -1007,9 +1019,10 @@ static int usbdux_ai_cmdtest(comedi_device *dev, comedi_subdevice *s, cmd->scan_begin_arg = 1000000; err++; } - /* calc the real sampling rate with the rounding errors */ - tmpTimer = - ((unsigned int)(cmd->scan_begin_arg / + /* + * calc the real sampling rate with the rounding errors + */ + tmpTimer = ((unsigned int)(cmd->scan_begin_arg / 1000000)) * 1000000; if (cmd->scan_begin_arg != tmpTimer) { cmd->scan_begin_arg = tmpTimer; @@ -1070,9 +1083,8 @@ static int send_dux_commands(usbduxsub_t *this_usbduxsub, int cmd_type) #ifdef NOISY_DUX_DEBUGBUG printk(KERN_DEBUG "comedi%d: usbdux: dux_commands: ", this_usbduxsub->comedidev->minor); - for (result = 0; result < SIZEOFDUXBUFFER; result++) { + for (result = 0; result < SIZEOFDUXBUFFER; result++) printk(" %02x", this_usbduxsub->dux_commands[result]); - } printk("\n"); #endif result = USB_BULK_MSG(this_usbduxsub->usbdev, @@ -1104,11 +1116,11 @@ static int receive_dux_commands(usbduxsub_t *this_usbduxsub, int command) "\n", this_usbduxsub->comedidev->minor, result); return result; } - if (le16_to_cpu(this_usbduxsub->insnBuffer[0]) == command) { + if (le16_to_cpu(this_usbduxsub->insnBuffer[0]) == command) return result; - } } - /* this is only reached if the data has been requested a couple of times */ + /* this is only reached if the data has been requested a couple of + * times */ dev_err(&this_usbduxsub->interface->dev, "comedi%d: insn: " "wrong data returned from firmware: want cmd %d, got cmd %d.\n", this_usbduxsub->comedidev->minor, command, @@ -1121,9 +1133,9 @@ static int usbdux_ai_inttrig(comedi_device *dev, comedi_subdevice *s, { int ret; usbduxsub_t *this_usbduxsub = dev->private; - if (!this_usbduxsub) { + if (!this_usbduxsub) return -EFAULT; - } + down(&this_usbduxsub->sem); if (!(this_usbduxsub->probed)) { up(&this_usbduxsub->sem); @@ -1209,7 +1221,8 @@ static int usbdux_ai_cmd(comedi_device *dev, comedi_subdevice *s) "comedi %d: sending commands to the usb device: size=%u\n", dev->minor, NUMCHANNELS); - if ((result = send_dux_commands(this_usbduxsub, SENDADCOMMANDS)) < 0) { + result = send_dux_commands(this_usbduxsub, SENDADCOMMANDS); + if (result < 0) { up(&this_usbduxsub->sem); return result; } @@ -1311,14 +1324,15 @@ static int usbdux_ai_insn_read(comedi_device *dev, comedi_subdevice *s, this_usbduxsub->dux_commands[1] = create_adc_command(chan, range); /* adc commands */ - if ((err = send_dux_commands(this_usbduxsub, SENDSINGLEAD)) < 0) { + err = send_dux_commands(this_usbduxsub, SENDSINGLEAD); + if (err < 0) { up(&this_usbduxsub->sem); return err; } for (i = 0; i < insn->n; i++) { - if ((err = receive_dux_commands(this_usbduxsub, - SENDSINGLEAD)) < 0) { + err = receive_dux_commands(this_usbduxsub, SENDSINGLEAD); + if (err < 0) { up(&this_usbduxsub->sem); return 0; } @@ -1396,8 +1410,8 @@ static int usbdux_ao_insn_write(comedi_device *dev, comedi_subdevice *s, this_usbduxsub->outBuffer[chan] = data[i]; /* channel number */ this_usbduxsub->dux_commands[4] = (chan << 6); - if ((err = send_dux_commands(this_usbduxsub, - SENDDACOMMANDS)) < 0) { + err = send_dux_commands(this_usbduxsub, SENDDACOMMANDS); + if (err < 0) { up(&this_usbduxsub->sem); return err; } @@ -1489,10 +1503,13 @@ static int usbdux_ao_cmdtest(comedi_device *dev, comedi_subdevice *s, tmp = cmd->convert_src; /* we always output at 1kHz just now all channels at once */ if (0) { /* (this_usbduxsub->high_speed) */ - /* in usb-2.0 only one conversion it tranmitted but with 8kHz/n */ + /* + * in usb-2.0 only one conversion it tranmitted but with 8kHz/n + */ cmd->convert_src &= TRIG_TIMER; } else { - /* all conversion events happen simultaneously with a rate of 1kHz/n */ + /* all conversion events happen simultaneously with a rate of + * 1kHz/n */ cmd->convert_src &= TRIG_NOW; } if (!cmd->convert_src || tmp != cmd->convert_src) @@ -1513,8 +1530,10 @@ static int usbdux_ao_cmdtest(comedi_device *dev, comedi_subdevice *s, if (err) return 1; - /* step 2: make sure trigger sources are unique and mutually compatible */ - /* note that mutual compatiblity is not an issue here */ + /* + * step 2: make sure trigger sources are unique and mutually compatible + * note that mutual compatiblity is not an issue here + */ if (cmd->scan_begin_src != TRIG_FOLLOW && cmd->scan_begin_src != TRIG_EXT && cmd->scan_begin_src != TRIG_TIMER) @@ -1751,12 +1770,13 @@ static int usbdux_dio_insn_bits(comedi_device *dev, comedi_subdevice *s, /* This command also tells the firmware to return */ /* the digital input lines */ - if ((err = send_dux_commands(this_usbduxsub, SENDDIOBITSCOMMAND)) < 0) { + err = send_dux_commands(this_usbduxsub, SENDDIOBITSCOMMAND); + if (err < 0) { up(&this_usbduxsub->sem); return err; } - if ((err = receive_dux_commands(this_usbduxsub, - SENDDIOBITSCOMMAND)) < 0) { + err = receive_dux_commands(this_usbduxsub, SENDDIOBITSCOMMAND); + if (err < 0) { up(&this_usbduxsub->sem); return err; } @@ -1784,13 +1804,14 @@ static int usbdux_counter_read(comedi_device *dev, comedi_subdevice *s, return -ENODEV; } - if ((err = send_dux_commands(this_usbduxsub, READCOUNTERCOMMAND)) < 0) { + err = send_dux_commands(this_usbduxsub, READCOUNTERCOMMAND); + if (err < 0) { up(&this_usbduxsub->sem); return err; } - if ((err = receive_dux_commands(this_usbduxsub, - READCOUNTERCOMMAND)) < 0) { + err = receive_dux_commands(this_usbduxsub, READCOUNTERCOMMAND); + if (err < 0) { up(&this_usbduxsub->sem); return err; } @@ -1819,7 +1840,8 @@ static int usbdux_counter_write(comedi_device *dev, comedi_subdevice *s, this_usbduxsub->dux_commands[1] = insn->chanspec; *((int16_t *) (this_usbduxsub->dux_commands + 2)) = cpu_to_le16(*data); - if ((err = send_dux_commands(this_usbduxsub, WRITECOUNTERCOMMAND)) < 0) { + err = send_dux_commands(this_usbduxsub, WRITECOUNTERCOMMAND); + if (err < 0) { up(&this_usbduxsub->sem); return err; } @@ -1884,7 +1906,8 @@ static int usbdux_pwm_cancel(comedi_device *dev, comedi_subdevice *s) dev_dbg(&this_usbduxsub->interface->dev, "comedi %d: sending pwm off command to the usb device.\n", dev->minor); - if ((res = send_dux_commands(this_usbduxsub, SENDPWMOFF)) < 0) + res = send_dux_commands(this_usbduxsub, SENDPWMOFF); + if (res < 0) return res; return res; @@ -1943,7 +1966,8 @@ static void usbduxsub_pwm_irq(struct urb *urb) urb->dev = this_usbduxsub->usbdev; urb->status = 0; if (this_usbduxsub->pwm_cmd_running) { - if ((ret = USB_SUBMIT_URB(urb)) < 0) { + ret = USB_SUBMIT_URB(urb); + if (ret < 0) { dev_err(&this_usbduxsub->interface->dev, "comedi_: pwm urb resubm failed in int-cont. " "ret=%d", ret); @@ -2011,9 +2035,8 @@ static int usbdux_pwm_period(comedi_device *dev, comedi_subdevice *s, return 0; } - /* is called from insn so there's no need to do all the sanity checks */ -static int usbdux_pwm_start(comedi_device * dev, comedi_subdevice * s) +static int usbdux_pwm_start(comedi_device *dev, comedi_subdevice *s) { int ret, i; usbduxsub_t *this_usbduxsub = dev->private; @@ -2027,13 +2050,13 @@ static int usbdux_pwm_start(comedi_device * dev, comedi_subdevice * s) } this_usbduxsub->dux_commands[1] = ((int8_t) this_usbduxsub->pwmDelay); - if ((ret = send_dux_commands(this_usbduxsub, SENDPWMON)) < 0) { + ret = send_dux_commands(this_usbduxsub, SENDPWMON); + if (ret < 0) return ret; - } + /* initalise the buffer */ - for (i = 0; i < this_usbduxsub->sizePwmBuf; i++) { + for (i = 0; i < this_usbduxsub->sizePwmBuf; i++) ((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0; - } this_usbduxsub->pwm_cmd_running = 1; ret = usbduxsub_submit_PwmURBs(this_usbduxsub); @@ -2044,19 +2067,20 @@ static int usbdux_pwm_start(comedi_device * dev, comedi_subdevice * s) return 0; } - /* generates the bit pattern for PWM with the optional sign bit */ -static int usbdux_pwm_pattern(comedi_device * dev, comedi_subdevice * s, +static int usbdux_pwm_pattern(comedi_device *dev, comedi_subdevice *s, int channel, lsampl_t value, lsampl_t sign) { usbduxsub_t *this_usbduxsub = dev->private; int i, szbuf; char *pBuf; - char pwm_mask,sgn_mask,c; + char pwm_mask; + char sgn_mask; + char c; - if (!this_usbduxsub) { + if (!this_usbduxsub) return -EFAULT; - } + /* this is the DIO bit which carries the PWM data */ pwm_mask = (1 << channel); /* this is the DIO bit which carries the optional direction bit */ @@ -2085,24 +2109,27 @@ static int usbdux_pwm_pattern(comedi_device * dev, comedi_subdevice * s, return 1; } -static int usbdux_pwm_write(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int usbdux_pwm_write(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { usbduxsub_t *this_usbduxsub = dev->private; - if (!this_usbduxsub) { + if (!this_usbduxsub) return -EFAULT; - } - if ((insn->n)!=1) { - /* doesn't make sense to have more than one value here */ - /* because it would just overwrite the PWM buffer a couple of times */ + if ((insn->n) != 1) { + /* + * doesn't make sense to have more than one value here because + * it would just overwrite the PWM buffer a couple of times + */ return -EINVAL; } - /* the sign is set via a special INSN only, this gives us 8 bits for */ - /* normal operation */ - /* relay sign 0 by default */ + /* + * the sign is set via a special INSN only, this gives us 8 bits for + * normal operation + * relay sign 0 by default + */ return usbdux_pwm_pattern(dev, s, CR_CHAN(insn->chanspec), data[0], 0); } @@ -2189,15 +2216,11 @@ static void tidy_up(usbduxsub_t *usbduxsub_tmp) usbduxsub_unlink_InURBs(usbduxsub_tmp); } for (i = 0; i < usbduxsub_tmp->numOfInBuffers; i++) { - if (usbduxsub_tmp->urbIn[i]->transfer_buffer) { - kfree(usbduxsub_tmp->urbIn[i]->transfer_buffer); - usbduxsub_tmp->urbIn[i]->transfer_buffer = NULL; - } - if (usbduxsub_tmp->urbIn[i]) { - usb_kill_urb(usbduxsub_tmp->urbIn[i]); - usb_free_urb(usbduxsub_tmp->urbIn[i]); - usbduxsub_tmp->urbIn[i] = NULL; - } + kfree(usbduxsub_tmp->urbIn[i]->transfer_buffer); + usbduxsub_tmp->urbIn[i]->transfer_buffer = NULL; + usb_kill_urb(usbduxsub_tmp->urbIn[i]); + usb_free_urb(usbduxsub_tmp->urbIn[i]); + usbduxsub_tmp->urbIn[i] = NULL; } kfree(usbduxsub_tmp->urbIn); usbduxsub_tmp->urbIn = NULL; @@ -2311,7 +2334,10 @@ static int read_firmware(usbduxsub_t *usbduxsub, void *firmwarePtr, long size) buf[j] = 0; /* dev_dbg(dev, "comedi_: buf=%s\n", buf); */ - /* EXTENSION: "# comment-till-end-of-line", for copyrights etc */ + /* + * EXTENSION: + * "# comment-till-end-of-line", for copyrights etc + */ if (buf[0] == '#') continue; @@ -2580,7 +2606,8 @@ static int usbduxsub_probe(struct usb_interface *uinterf, /* pwm */ if (usbduxsub[index].high_speed) { - usbduxsub[index].sizePwmBuf = 512; /* max bulk ep size in high speed */ + /* max bulk ep size in high speed */ + usbduxsub[index].sizePwmBuf = 512; usbduxsub[index].urbPwm = USB_ALLOC_URB(0); if (usbduxsub[index].urbPwm == NULL) { dev_err(dev, "comedi_: usbdux%d: " @@ -2651,7 +2678,8 @@ static int usbdux_attach(comedi_device *dev, comedi_devconfig *it) dev->private = NULL; down(&start_stop_sem); - /* find a valid device which has been detected by the probe function of the usb */ + /* find a valid device which has been detected by the probe function of + * the usb */ index = -1; for (i = 0; i < NUMUSBDUX; i++) { if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) { @@ -2691,7 +2719,8 @@ static int usbdux_attach(comedi_device *dev, comedi_devconfig *it) } /* allocate space for the subdevices */ - if ((ret = alloc_subdevices(dev, dev->n_subdevices)) < 0) { + ret = alloc_subdevices(dev, dev->n_subdevices); + if (ret < 0) { dev_err(&udev->interface->dev, "comedi%d: error alloc space for subdev\n", dev->minor); up(&start_stop_sem);