UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (67 commits)
  cxgb4vf: recover from failure in cxgb4vf_open()
  netfilter: ebtables: make broute table work again
  netfilter: fix race in conntrack between dump_table and destroy
  ah: reload pointers to skb data after calling skb_cow_data()
  ah: update maximum truncated ICV length
  xfrm: check trunc_len in XFRMA_ALG_AUTH_TRUNC
  ehea: Increase the skb array usage
  net/fec: remove config FEC2 as it's used nowhere
  pcnet_cs: add new_id
  tcp: disallow bind() to reuse addr/port
  net/r8169: Update the function of parsing firmware
  net: ppp: use {get,put}_unaligned_be{16,32}
  CAIF: Fix IPv6 support in receive path for GPRS/3G
  arp: allow to invalidate specific ARP entries
  net_sched: factorize qdisc stats handling
  mlx4: Call alloc_etherdev to allocate RX and TX queues
  net: Add alloc_netdev_mqs function
  caif: don't set connection request param size before copying data
  cxgb4vf: fix mailbox data/control coherency domain race
  qlcnic: change module parameter permissions
  ...
This commit is contained in:
Linus Torvalds 2011-01-11 16:32:41 -08:00
parent fb7b5a9569 343a8d13aa
commit 4162cf6497
109 changed files with 2905 additions and 1871 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/networking/dccp.txt
View File

@ -167,6 +167,7 @@ rx_ccid = 2
seq_window = 100
The initial sequence window (sec. 7.5.2) of the sender. This influences
the local ackno validity and the remote seqno validity windows (7.5.1).
Values in the range Wmin = 32 (RFC 4340, 7.5.2) up to 2^32-1 can be set.
tx_qlen = 5
The size of the transmit buffer in packets. A value of 0 corresponds

19
drivers/atm/ambassador.c
View File

@ -1926,8 +1926,9 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
const struct firmware *fw;
unsigned long start_address;
const struct ihex_binrec *rec;
const char *errmsg = 0;
int res;
res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev);
if (res) {
PRINTK (KERN_ERR, "Cannot load microcode data");
@ -1937,8 +1938,8 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
/* First record contains just the start address */
rec = (const struct ihex_binrec *)fw->data;
if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) {
PRINTK (KERN_ERR, "Bad microcode data (no start record)");
return -EINVAL;
errmsg = "no start record";
goto fail;
}
start_address = be32_to_cpup((__be32 *)rec->data);
@ -1950,12 +1951,12 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr),
be16_to_cpu(rec->len));
if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) {
PRINTK (KERN_ERR, "Bad microcode data (record too long)");
return -EINVAL;
errmsg = "record too long";
goto fail;
}
if (be16_to_cpu(rec->len) & 3) {
PRINTK (KERN_ERR, "Bad microcode data (odd number of bytes)");
return -EINVAL;
errmsg = "odd number of bytes";
goto fail;
}
res = loader_write(lb, dev, rec);
if (res)
@ -1970,6 +1971,10 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) {
res = loader_start(lb, dev, start_address);
return res;
fail:
release_firmware(fw);
PRINTK(KERN_ERR, "Bad microcode data (%s)", errmsg);
return -EINVAL;
}
/********** give adapter parameters **********/

9
drivers/net/Kconfig
View File

@ -1944,19 +1944,12 @@ config 68360_ENET
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
depends on M523x || M527x || M5272 || M528x || M520x || M532x || \
MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5
MACH_MX27 || ARCH_MX35 || ARCH_MX25 || ARCH_MX5 || SOC_IMX28
select PHYLIB
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
config FEC2
bool "Second FEC ethernet controller (on some ColdFire CPUs)"
depends on FEC
help
Say Y here if you want to use the second built-in 10/100 Fast
ethernet controller on some Motorola ColdFire processors.
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
depends on PPC_MPC52xx && PPC_BESTCOMM

74
drivers/net/bfin_mac.c
View File

@ -8,6 +8,11 @@
* Licensed under the GPL-2 or later.
*/
#define DRV_VERSION "1.1"
#define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
@ -41,12 +46,7 @@
#include "bfin_mac.h"
#define DRV_NAME "bfin_mac"
#define DRV_VERSION "1.1"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
#define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_AUTHOR("Bryan Wu, Luke Yang");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_ALIAS("platform:bfin_mac");
@ -189,8 +189,7 @@ static int desc_list_init(void)
/* allocate a new skb for next time receive */
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
printk(KERN_NOTICE DRV_NAME
": init: low on mem - packet dropped\n");
pr_notice("init: low on mem - packet dropped\n");
goto init_error;
}
skb_reserve(new_skb, NET_IP_ALIGN);
@ -240,7 +239,7 @@ static int desc_list_init(void)
init_error:
desc_list_free();
printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
pr_err("kmalloc failed\n");
return -ENOMEM;
}
@ -259,8 +258,7 @@ static int bfin_mdio_poll(void)
while ((bfin_read_EMAC_STAADD()) & STABUSY) {
udelay(1);
if (timeout_cnt-- < 0) {
printk(KERN_ERR DRV_NAME
": wait MDC/MDIO transaction to complete timeout\n");
pr_err("wait MDC/MDIO transaction to complete timeout\n");
return -ETIMEDOUT;
}
}
@ -350,9 +348,9 @@ static void bfin_mac_adjust_link(struct net_device *dev)
opmode &= ~RMII_10;
break;
default:
printk(KERN_WARNING
"%s: Ack! Speed (%d) is not 10/100!\n",
DRV_NAME, phydev->speed);
netdev_warn(dev,
"Ack! Speed (%d) is not 10/100!\n",
phydev->speed);
break;
}
bfin_write_EMAC_OPMODE(opmode);
@ -417,14 +415,13 @@ static int mii_probe(struct net_device *dev, int phy_mode)
/* now we are supposed to have a proper phydev, to attach to... */
if (!phydev) {
printk(KERN_INFO "%s: Don't found any phy device at all\n",
dev->name);
netdev_err(dev, "no phy device found\n");
return -ENODEV;
}
if (phy_mode != PHY_INTERFACE_MODE_RMII &&
phy_mode != PHY_INTERFACE_MODE_MII) {
printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
netdev_err(dev, "invalid phy interface mode\n");
return -EINVAL;
}
@ -432,7 +429,7 @@ static int mii_probe(struct net_device *dev, int phy_mode)
0, phy_mode);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
netdev_err(dev, "could not attach PHY\n");
return PTR_ERR(phydev);
}
@ -453,11 +450,10 @@ static int mii_probe(struct net_device *dev, int phy_mode)
lp->old_duplex = -1;
lp->phydev = phydev;
printk(KERN_INFO "%s: attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
"@sclk=%dMHz)\n",
DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
MDC_CLK, mdc_div, sclk/1000000);
pr_info("attached PHY driver [%s] "
"(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n",
phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
MDC_CLK, mdc_div, sclk/1000000);
return 0;
}
@ -502,7 +498,7 @@ bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strcpy(info->driver, DRV_NAME);
strcpy(info->driver, KBUILD_MODNAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->fw_version, "N/A");
strcpy(info->bus_info, dev_name(&dev->dev));
@ -562,7 +558,7 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
};
/**************************************************************************/
void setup_system_regs(struct net_device *dev)
static void setup_system_regs(struct net_device *dev)
{
struct bfin_mac_local *lp = netdev_priv(dev);
int i;
@ -592,6 +588,10 @@ void setup_system_regs(struct net_device *dev)
bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
/* Set vlan regs to let 1522 bytes long packets pass through */
bfin_write_EMAC_VLAN1(lp->vlan1_mask);
bfin_write_EMAC_VLAN2(lp->vlan2_mask);
/* Initialize the TX DMA channel registers */
bfin_write_DMA2_X_COUNT(0);
bfin_write_DMA2_X_MODIFY(4);
@ -827,8 +827,7 @@ static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
udelay(1);
if (timeout_cnt == 0)
printk(KERN_ERR DRV_NAME
": fails to timestamp the TX packet\n");
netdev_err(netdev, "timestamp the TX packet failed\n");
else {
struct skb_shared_hwtstamps shhwtstamps;
u64 ns;
@ -1083,8 +1082,7 @@ static void bfin_mac_rx(struct net_device *dev)
* we which case we simply drop the packet
*/
if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
printk(KERN_NOTICE DRV_NAME
": rx: receive error - packet dropped\n");
netdev_notice(dev, "rx: receive error - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
@ -1094,8 +1092,7 @@ static void bfin_mac_rx(struct net_device *dev)
new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
if (!new_skb) {
printk(KERN_NOTICE DRV_NAME
": rx: low on mem - packet dropped\n");
netdev_notice(dev, "rx: low on mem - packet dropped\n");
dev->stats.rx_dropped++;
goto out;
}
@ -1213,7 +1210,7 @@ static int bfin_mac_enable(struct phy_device *phydev)
int ret;
u32 opmode;
pr_debug("%s: %s\n", DRV_NAME, __func__);
pr_debug("%s\n", __func__);
/* Set RX DMA */
bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
@ -1323,7 +1320,7 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
u32 sysctl;
if (dev->flags & IFF_PROMISC) {
printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
netdev_info(dev, "set promisc mode\n");
sysctl = bfin_read_EMAC_OPMODE();
sysctl |= PR;
bfin_write_EMAC_OPMODE(sysctl);
@ -1393,7 +1390,7 @@ static int bfin_mac_open(struct net_device *dev)
* address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
*/
if (!is_valid_ether_addr(dev->dev_addr)) {
printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
netdev_warn(dev, "no valid ethernet hw addr\n");
return -EINVAL;
}
@ -1527,6 +1524,9 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
goto out_err_mii_probe;
}
lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask;
lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask;
/* Fill in the fields of the device structure with ethernet values. */
ether_setup(ndev);
@ -1558,7 +1558,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
bfin_mac_hwtstamp_init(ndev);
/* now, print out the card info, in a short format.. */
dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
return 0;
@ -1650,7 +1650,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
* so set the GPIO pins to Ethernet mode
*/
pin_req = mii_bus_pd->mac_peripherals;
rc = peripheral_request_list(pin_req, DRV_NAME);
rc = peripheral_request_list(pin_req, KBUILD_MODNAME);
if (rc) {
dev_err(&pdev->dev, "Requesting peripherals failed!\n");
return rc;
@ -1739,7 +1739,7 @@ static struct platform_driver bfin_mac_driver = {
.resume = bfin_mac_resume,
.suspend = bfin_mac_suspend,
.driver = {
.name = DRV_NAME,
.name = KBUILD_MODNAME,
.owner = THIS_MODULE,
},
};

11
drivers/net/bfin_mac.h
View File

@ -17,7 +17,14 @@
#include <linux/etherdevice.h>
#include <linux/bfin_mac.h>
/*
* Disable hardware checksum for bug #5600 if writeback cache is
* enabled. Otherwize, corrupted RX packet will be sent up stack
* without error mark.
*/
#ifndef CONFIG_BFIN_EXTMEM_WRITEBACK
#define BFIN_MAC_CSUM_OFFLOAD
#endif
#define TX_RECLAIM_JIFFIES (HZ / 5)
@ -68,7 +75,6 @@ struct bfin_mac_local {
*/
struct net_device_stats stats;
unsigned char Mac[6]; /* MAC address of the board */
spinlock_t lock;
int wol; /* Wake On Lan */
@ -76,6 +82,9 @@ struct bfin_mac_local {
struct timer_list tx_reclaim_timer;
struct net_device *ndev;
/* Data for EMAC_VLAN1 regs */
u16 vlan1_mask, vlan2_mask;
/* MII and PHY stuffs */
int old_link; /* used by bf537_adjust_link */
int old_speed;

1
drivers/net/bnx2x/bnx2x.h
View File

@ -636,6 +636,7 @@ struct bnx2x_common {
#define CHIP_METAL(bp) (bp->common.chip_id & 0x00000ff0)
#define CHIP_BOND_ID(bp) (bp->common.chip_id & 0x0000000f)
#define CHIP_PARITY_ENABLED(bp) (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
int flash_size;
#define NVRAM_1MB_SIZE 0x20000 /* 1M bit in bytes */

990
drivers/net/bnx2x/bnx2x_dump.h
View File

File diff suppressed because it is too large Load Diff

22
drivers/net/bnx2x/bnx2x_ethtool.c
View File

@ -24,6 +24,7 @@
#include "bnx2x.h"
#include "bnx2x_cmn.h"
#include "bnx2x_dump.h"
#include "bnx2x_init.h"
/* Note: in the format strings below %s is replaced by the queue-name which is
* either its index or 'fcoe' for the fcoe queue. Make sure the format string
@ -472,7 +473,7 @@ static int bnx2x_get_regs_len(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
int regdump_len = 0;
int i;
int i, j, k;
if (CHIP_IS_E1(bp)) {
for (i = 0; i < REGS_COUNT; i++)
@ -502,6 +503,15 @@ static int bnx2x_get_regs_len(struct net_device *dev)
if (IS_E2_ONLINE(wreg_addrs_e2[i].info))
regdump_len += wreg_addrs_e2[i].size *
(1 + wreg_addrs_e2[i].read_regs_count);
for (i = 0; i < PAGE_MODE_VALUES_E2; i++)
for (j = 0; j < PAGE_WRITE_REGS_E2; j++) {
for (k = 0; k < PAGE_READ_REGS_E2; k++)
if (IS_E2_ONLINE(page_read_regs_e2[k].
info))
regdump_len +=
page_read_regs_e2[k].size;
}
}
regdump_len *= 4;
regdump_len += sizeof(struct dump_hdr);
@ -539,6 +549,12 @@ static void bnx2x_get_regs(struct net_device *dev,
if (!netif_running(bp->dev))
return;
/* Disable parity attentions as long as following dump may
* cause false alarms by reading never written registers. We
* will re-enable parity attentions right after the dump.
*/
bnx2x_disable_blocks_parity(bp);
dump_hdr.hdr_size = (sizeof(struct dump_hdr) / 4) - 1;
dump_hdr.dump_sign = dump_sign_all;
dump_hdr.xstorm_waitp = REG_RD(bp, XSTORM_WAITP_ADDR);
@ -580,6 +596,10 @@ static void bnx2x_get_regs(struct net_device *dev,
bnx2x_read_pages_regs_e2(bp, p);
}
/* Re-enable parity attentions */
bnx2x_clear_blocks_parity(bp);
if (CHIP_PARITY_ENABLED(bp))
bnx2x_enable_blocks_parity(bp);
}
#define PHY_FW_VER_LEN 20

220
drivers/net/bnx2x/bnx2x_init.h
View File

@ -192,5 +192,225 @@ struct src_ent {
u64 next;
};
/****************************************************************************
* Parity configuration
****************************************************************************/
#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2) \
{ \
block##_REG_##block##_PRTY_MASK, \
block##_REG_##block##_PRTY_STS_CLR, \
en_mask, {m1, m1h, m2}, #block \
}
#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2) \
{ \
block##_REG_##block##_PRTY_MASK_0, \
block##_REG_##block##_PRTY_STS_CLR_0, \
en_mask, {m1, m1h, m2}, #block"_0" \
}
#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2) \
{ \
block##_REG_##block##_PRTY_MASK_1, \
block##_REG_##block##_PRTY_STS_CLR_1, \
en_mask, {m1, m1h, m2}, #block"_1" \
}
static const struct {
u32 mask_addr;
u32 sts_clr_addr;
u32 en_mask; /* Mask to enable parity attentions */
struct {
u32 e1; /* 57710 */
u32 e1h; /* 57711 */
u32 e2; /* 57712 */
} reg_mask; /* Register mask (all valid bits) */
char name[7]; /* Block's longest name is 6 characters long
* (name + suffix)
*/
} bnx2x_blocks_parity_data[] = {
/* bit 19 masked */
/* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */
/* bit 5,18,20-31 */
/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */
/* bit 5 */
/* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */
/* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */
/* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */
/* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't
* want to handle "system kill" flow at the moment.
*/
BLOCK_PRTY_INFO(PXP, 0x3ffffff, 0x3ffffff, 0x3ffffff, 0x3ffffff),
BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(PXP2, 0x7ff, 0x7f, 0x7f, 0x7ff),
BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0),
BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff),
BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1),
BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff),
BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3),
{GRCBASE_UPB + PB_REG_PB_PRTY_MASK,
GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0,
{0xf, 0xf, 0xf}, "UPB"},
{GRCBASE_XPB + PB_REG_PB_PRTY_MASK,
GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0,
{0xf, 0xf, 0xf}, "XPB"},
BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7),
BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f),
BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf),
BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1),
BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf),
BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf),
BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff),
BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff),
BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f),
BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f),
BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f),
BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff),
BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f),
};
/* [28] MCP Latched rom_parity
* [29] MCP Latched ump_rx_parity
* [30] MCP Latched ump_tx_parity
* [31] MCP Latched scpad_parity
*/
#define MISC_AEU_ENABLE_MCP_PRTY_BITS \
(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
/* Below registers control the MCP parity attention output. When
* MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
* enabled, when cleared - disabled.
*/
static const u32 mcp_attn_ctl_regs[] = {
MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
MISC_REG_AEU_ENABLE4_NIG_0,
MISC_REG_AEU_ENABLE4_PXP_0,
MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
MISC_REG_AEU_ENABLE4_NIG_1,
MISC_REG_AEU_ENABLE4_PXP_1
};
static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
{
int i;
u32 reg_val;
for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
if (enable)
reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
else
reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
}
}
static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx)
{
if (CHIP_IS_E1(bp))
return bnx2x_blocks_parity_data[idx].reg_mask.e1;
else if (CHIP_IS_E1H(bp))
return bnx2x_blocks_parity_data[idx].reg_mask.e1h;
else
return bnx2x_blocks_parity_data[idx].reg_mask.e2;
}
static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp)
{
int i;
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 dis_mask = bnx2x_parity_reg_mask(bp, i);
if (dis_mask) {
REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
dis_mask);
DP(NETIF_MSG_HW, "Setting parity mask "
"for %s to\t\t0x%x\n",
bnx2x_blocks_parity_data[i].name, dis_mask);
}
}
/* Disable MCP parity attentions */
bnx2x_set_mcp_parity(bp, false);
}
/**
* Clear the parity error status registers.
*/
static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp)
{
int i;
u32 reg_val, mcp_aeu_bits =
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY |
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY;
/* Clear SEM_FAST parities */
REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1);
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
if (reg_mask) {
reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i].
sts_clr_addr);
if (reg_val & reg_mask)
DP(NETIF_MSG_HW,
"Parity errors in %s: 0x%x\n",
bnx2x_blocks_parity_data[i].name,
reg_val & reg_mask);
}
}
/* Check if there were parity attentions in MCP */
reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP);
if (reg_val & mcp_aeu_bits)
DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n",
reg_val & mcp_aeu_bits);
/* Clear parity attentions in MCP:
* [7] clears Latched rom_parity
* [8] clears Latched ump_rx_parity
* [9] clears Latched ump_tx_parity
* [10] clears Latched scpad_parity (both ports)
*/
REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780);
}
static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp)
{
int i;
for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) {
u32 reg_mask = bnx2x_parity_reg_mask(bp, i);
if (reg_mask)
REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr,
bnx2x_blocks_parity_data[i].en_mask & reg_mask);
}
/* Enable MCP parity attentions */
bnx2x_set_mcp_parity(bp, true);
}
#endif /* BNX2X_INIT_H */

70
drivers/net/bnx2x/bnx2x_main.c
View File

@ -3152,7 +3152,6 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
#define LOAD_COUNTER_MASK (((u32)0x1 << LOAD_COUNTER_BITS) - 1)
#define RESET_DONE_FLAG_MASK (~LOAD_COUNTER_MASK)
#define RESET_DONE_FLAG_SHIFT LOAD_COUNTER_BITS
#define CHIP_PARITY_SUPPORTED(bp) (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp))
/*
* should be run under rtnl lock
@ -3527,7 +3526,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
try to handle this event */
bnx2x_acquire_alr(bp);
if (bnx2x_chk_parity_attn(bp)) {
if (CHIP_PARITY_ENABLED(bp) && bnx2x_chk_parity_attn(bp)) {
bp->recovery_state = BNX2X_RECOVERY_INIT;
bnx2x_set_reset_in_progress(bp);
schedule_delayed_work(&bp->reset_task, 0);
@ -4754,7 +4753,7 @@ static int bnx2x_int_mem_test(struct bnx2x *bp)
return 0; /* OK */
}
static void enable_blocks_attention(struct bnx2x *bp)
static void bnx2x_enable_blocks_attention(struct bnx2x *bp)
{
REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0);
if (CHIP_IS_E2(bp))
@ -4808,53 +4807,9 @@ static void enable_blocks_attention(struct bnx2x *bp)
REG_WR(bp, CDU_REG_CDU_INT_MASK, 0);
REG_WR(bp, DMAE_REG_DMAE_INT_MASK, 0);
/* REG_WR(bp, MISC_REG_MISC_INT_MASK, 0); */
REG_WR(bp, PBF_REG_PBF_INT_MASK, 0X18); /* bit 3,4 masked */
REG_WR(bp, PBF_REG_PBF_INT_MASK, 0x18); /* bit 3,4 masked */
}
static const struct {
u32 addr;
u32 mask;
} bnx2x_parity_mask[] = {
{PXP_REG_PXP_PRTY_MASK, 0x3ffffff},
{PXP2_REG_PXP2_PRTY_MASK_0, 0xffffffff},
{PXP2_REG_PXP2_PRTY_MASK_1, 0x7f},
{HC_REG_HC_PRTY_MASK, 0x7},
{MISC_REG_MISC_PRTY_MASK, 0x1},
{QM_REG_QM_PRTY_MASK, 0x0},
{DORQ_REG_DORQ_PRTY_MASK, 0x0},
{GRCBASE_UPB + PB_REG_PB_PRTY_MASK, 0x0},
{GRCBASE_XPB + PB_REG_PB_PRTY_MASK, 0x0},
{SRC_REG_SRC_PRTY_MASK, 0x4}, /* bit 2 */
{CDU_REG_CDU_PRTY_MASK, 0x0},
{CFC_REG_CFC_PRTY_MASK, 0x0},
{DBG_REG_DBG_PRTY_MASK, 0x0},
{DMAE_REG_DMAE_PRTY_MASK, 0x0},
{BRB1_REG_BRB1_PRTY_MASK, 0x0},
{PRS_REG_PRS_PRTY_MASK, (1<<6)},/* bit 6 */
{TSDM_REG_TSDM_PRTY_MASK, 0x18}, /* bit 3,4 */
{CSDM_REG_CSDM_PRTY_MASK, 0x8}, /* bit 3 */
{USDM_REG_USDM_PRTY_MASK, 0x38}, /* bit 3,4,5 */
{XSDM_REG_XSDM_PRTY_MASK, 0x8}, /* bit 3 */
{TSEM_REG_TSEM_PRTY_MASK_0, 0x0},
{TSEM_REG_TSEM_PRTY_MASK_1, 0x0},
{USEM_REG_USEM_PRTY_MASK_0, 0x0},
{USEM_REG_USEM_PRTY_MASK_1, 0x0},
{CSEM_REG_CSEM_PRTY_MASK_0, 0x0},
{CSEM_REG_CSEM_PRTY_MASK_1, 0x0},
{XSEM_REG_XSEM_PRTY_MASK_0, 0x0},
{XSEM_REG_XSEM_PRTY_MASK_1, 0x0}
};
static void enable_blocks_parity(struct bnx2x *bp)
{
int i;
for (i = 0; i < ARRAY_SIZE(bnx2x_parity_mask); i++)
REG_WR(bp, bnx2x_parity_mask[i].addr,
bnx2x_parity_mask[i].mask);
}
static void bnx2x_reset_common(struct bnx2x *bp)
{
/* reset_common */
@ -5350,9 +5305,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
/* clear PXP2 attentions */
REG_RD(bp, PXP2_REG_PXP2_INT_STS_CLR_0);
enable_blocks_attention(bp);
if (CHIP_PARITY_SUPPORTED(bp))
enable_blocks_parity(bp);
bnx2x_enable_blocks_attention(bp);
if (CHIP_PARITY_ENABLED(bp))
bnx2x_enable_blocks_parity(bp);
if (!BP_NOMCP(bp)) {
/* In E2 2-PORT mode, same ext phy is used for the two paths */
@ -8751,13 +8706,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
dev_err(&bp->pdev->dev, "MCP disabled, "
"must load devices in order!\n");
/* Set multi queue mode */
if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
dev_err(&bp->pdev->dev, "Multi disabled since int_mode "
"requested is not MSI-X\n");
multi_mode = ETH_RSS_MODE_DISABLED;
}
bp->multi_mode = multi_mode;
bp->int_mode = int_mode;
@ -9560,9 +9508,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
/* Delete all NAPI objects */
bnx2x_del_all_napi(bp);
/* Power on: we can't let PCI layer write to us while we are in D3 */
bnx2x_set_power_state(bp, PCI_D0);
/* Disable MSI/MSI-X */
bnx2x_disable_msi(bp);
/* Power off */
bnx2x_set_power_state(bp, PCI_D3hot);
/* Make sure RESET task is not scheduled before continuing */
cancel_delayed_work_sync(&bp->reset_task);

74
drivers/net/bnx2x/bnx2x_reg.h
View File

@ -18,6 +18,8 @@
* WR - Write Clear (write 1 to clear the bit)
*
*/
#ifndef BNX2X_REG_H
#define BNX2X_REG_H
#define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2)
@ -39,6 +41,8 @@
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
/* [R 4] Parity register #0 read */
#define BRB1_REG_BRB1_PRTY_STS 0x6012c
/* [RC 4] Parity register #0 read clear */
#define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130
/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
* address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
* BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
@ -132,8 +136,12 @@
#define CCM_REG_CCM_INT_MASK 0xd01e4
/* [R 11] Interrupt register #0 read */
#define CCM_REG_CCM_INT_STS 0xd01d8
/* [RW 27] Parity mask register #0 read/write */
#define CCM_REG_CCM_PRTY_MASK 0xd01f4
/* [R 27] Parity register #0 read */
#define CCM_REG_CCM_PRTY_STS 0xd01e8
/* [RC 27] Parity register #0 read clear */
#define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@ -350,6 +358,8 @@
#define CDU_REG_CDU_PRTY_MASK 0x10104c
/* [R 5] Parity register #0 read */
#define CDU_REG_CDU_PRTY_STS 0x101040
/* [RC 5] Parity register #0 read clear */
#define CDU_REG_CDU_PRTY_STS_CLR 0x101044
/* [RC 32] logging of error data in case of a CDU load error:
{expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
ype_error; ctual_active; ctual_compressed_context}; */
@ -381,6 +391,8 @@
#define CFC_REG_CFC_PRTY_MASK 0x104118
/* [R 4] Parity register #0 read */
#define CFC_REG_CFC_PRTY_STS 0x10410c
/* [RC 4] Parity register #0 read clear */
#define CFC_REG_CFC_PRTY_STS_CLR 0x104110
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM 0x104800
#define CFC_REG_CONTROL0 0x104028
@ -466,6 +478,8 @@
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
/* [R 11] Parity register #0 read */
#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
/* [RC 11] Parity register #0 read clear */
#define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4
#define CSDM_REG_ENABLE_IN1 0xc2238
#define CSDM_REG_ENABLE_IN2 0xc223c
#define CSDM_REG_ENABLE_OUT1 0xc2240
@ -556,6 +570,9 @@
/* [R 32] Parity register #0 read */
#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
/* [RC 32] Parity register #0 read clear */
#define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128
#define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138
#define CSEM_REG_ENABLE_IN 0x2000a4
#define CSEM_REG_ENABLE_OUT 0x2000a8
/* [RW 32] This address space contains all registers and memories that are
@ -648,6 +665,8 @@
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
/* [R 1] Parity register #0 read */
#define DBG_REG_DBG_PRTY_STS 0xc09c
/* [RC 1] Parity register #0 read clear */
#define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0
/* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
* function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
* 4.Completion function=0; 5.Error handling=0 */
@ -668,6 +687,8 @@
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
/* [R 4] Parity register #0 read */
#define DMAE_REG_DMAE_PRTY_STS 0x102058
/* [RC 4] Parity register #0 read clear */
#define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0 0x102080
/* [RW 1] Command 1 go. */
@ -734,6 +755,8 @@
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
/* [R 2] Parity register #0 read */
#define DORQ_REG_DORQ_PRTY_STS 0x170184
/* [RC 2] Parity register #0 read clear */
#define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188
/* [RW 8] The address to write the DPM CID to STORM. */
#define DORQ_REG_DPM_CID_ADDR 0x170044
/* [RW 5] The DPM mode CID extraction offset. */
@ -842,8 +865,12 @@
/* [R 1] data availble for error memory. If this bit is clear do not red
* from error_handling_memory. */
#define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
/* [RW 11] Parity mask register #0 read/write */
#define IGU_REG_IGU_PRTY_MASK 0x1300a8
/* [R 11] Parity register #0 read */
#define IGU_REG_IGU_PRTY_STS 0x13009c
/* [RC 11] Parity register #0 read clear */
#define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0
/* [R 4] Debug: int_handle_fsm */
#define IGU_REG_INT_HANDLE_FSM 0x130050
#define IGU_REG_LEADING_EDGE_LATCH 0x130134
@ -1501,6 +1528,8 @@
#define MISC_REG_MISC_PRTY_MASK 0xa398
/* [R 1] Parity register #0 read */
#define MISC_REG_MISC_PRTY_STS 0xa38c
/* [RC 1] Parity register #0 read clear */
#define MISC_REG_MISC_PRTY_STS_CLR 0xa390
#define MISC_REG_NIG_WOL_P0 0xa270
#define MISC_REG_NIG_WOL_P1 0xa274
/* [R 1] If set indicate that the pcie_rst_b was asserted without perst
@ -2082,6 +2111,10 @@
#define PBF_REG_PBF_INT_MASK 0x1401d4
/* [R 5] Interrupt register #0 read */
#define PBF_REG_PBF_INT_STS 0x1401c8
/* [RW 20] Parity mask register #0 read/write */
#define PBF_REG_PBF_PRTY_MASK 0x1401e4
/* [RC 20] Parity register #0 read clear */
#define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc
#define PB_REG_CONTROL 0
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
@ -2091,6 +2124,8 @@
#define PB_REG_PB_PRTY_MASK 0x38
/* [R 4] Parity register #0 read */
#define PB_REG_PB_PRTY_STS 0x2c
/* [RC 4] Parity register #0 read clear */
#define PB_REG_PB_PRTY_STS_CLR 0x30
#define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
#define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8)
#define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1)
@ -2446,6 +2481,8 @@
#define PRS_REG_PRS_PRTY_MASK 0x401a4
/* [R 8] Parity register #0 read */
#define PRS_REG_PRS_PRTY_STS 0x40198
/* [RC 8] Parity register #0 read clear */
#define PRS_REG_PRS_PRTY_STS_CLR 0x4019c
/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
request message */
#define PRS_REG_PURE_REGIONS 0x40024
@ -2599,6 +2636,9 @@
/* [R 32] Parity register #0 read */
#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
/* [RC 32] Parity register #0 read clear */
#define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580
#define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590
/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
indication about backpressure) */
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
@ -3001,6 +3041,8 @@
#define PXP_REG_PXP_PRTY_MASK 0x103094
/* [R 26] Parity register #0 read */
#define PXP_REG_PXP_PRTY_STS 0x103088
/* [RC 27] Parity register #0 read clear */
#define PXP_REG_PXP_PRTY_STS_CLR 0x10308c
/* [RW 4] The activity counter initial increment value sent in the load
request */
#define QM_REG_ACTCTRINITVAL_0 0x168040
@ -3157,6 +3199,8 @@
#define QM_REG_QM_PRTY_MASK 0x168454
/* [R 12] Parity register #0 read */
#define QM_REG_QM_PRTY_STS 0x168448
/* [RC 12] Parity register #0 read clear */
#define QM_REG_QM_PRTY_STS_CLR 0x16844c
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
/* [R 32] Current queues in pipeline: Queues from 96 to 127 */
@ -3442,6 +3486,8 @@
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
/* [W 1] reset to parity interrupt */
#define SEM_FAST_REG_PARITY_RST 0x18840
#define SRC_REG_COUNTFREE0 0x40500
/* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
ports. If set the searcher support 8 functions. */
@ -3470,6 +3516,8 @@
#define SRC_REG_SRC_PRTY_MASK 0x404c8
/* [R 3] Parity register #0 read */
#define SRC_REG_SRC_PRTY_STS 0x404bc
/* [RC 3] Parity register #0 read clear */
#define SRC_REG_SRC_PRTY_STS_CLR 0x404c0
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP 0x5017c
/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
@ -3596,8 +3644,12 @@
#define TCM_REG_TCM_INT_MASK 0x501dc
/* [R 11] Interrupt register #0 read */
#define TCM_REG_TCM_INT_STS 0x501d0
/* [RW 27] Parity mask register #0 read/write */
#define TCM_REG_TCM_PRTY_MASK 0x501ec
/* [R 27] Parity register #0 read */
#define TCM_REG_TCM_PRTY_STS 0x501e0
/* [RC 27] Parity register #0 read clear */
#define TCM_REG_TCM_PRTY_STS_CLR 0x501e4
/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@ -3755,6 +3807,10 @@
#define TM_REG_TM_INT_MASK 0x1640fc
/* [R 1] Interrupt register #0 read */
#define TM_REG_TM_INT_STS 0x1640f0
/* [RW 7] Parity mask register #0 read/write */
#define TM_REG_TM_PRTY_MASK 0x16410c
/* [RC 7] Parity register #0 read clear */
#define TM_REG_TM_PRTY_STS_CLR 0x164104
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
@ -3835,6 +3891,8 @@
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
/* [R 11] Parity register #0 read */
#define TSDM_REG_TSDM_PRTY_STS 0x422b0
/* [RC 11] Parity register #0 read clear */
#define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
/* [RW 3] The source that is associated with arbitration element 0. Source
@ -3914,6 +3972,9 @@
#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
/* [RW 8] List of free threads . There is a bit per thread. */
#define TSEM_REG_THREADS_LIST 0x1802e4
/* [RC 32] Parity register #0 read clear */
#define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118
#define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128
/* [RW 3] The arbitration scheme of time_slot 0 */
#define TSEM_REG_TS_0_AS 0x180038
/* [RW 3] The arbitration scheme of time_slot 10 */
@ -4116,6 +4177,8 @@
#define UCM_REG_UCM_INT_STS 0xe01c8
/* [R 27] Parity register #0 read */
#define UCM_REG_UCM_PRTY_STS 0xe01d8
/* [RC 27] Parity register #0 read clear */
#define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc
/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
Is used to determine the number of the AG context REG-pairs written back;
@ -4292,6 +4355,8 @@
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
/* [R 11] Parity register #0 read */
#define USDM_REG_USDM_PRTY_STS 0xc42b4
/* [RC 11] Parity register #0 read clear */
#define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8
/* [RW 5] The number of time_slots in the arbitration cycle */
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
/* [RW 3] The source that is associated with arbitration element 0. Source
@ -4421,6 +4486,9 @@
/* [R 32] Parity register #0 read */
#define USEM_REG_USEM_PRTY_STS_0 0x300124
#define USEM_REG_USEM_PRTY_STS_1 0x300134
/* [RC 32] Parity register #0 read clear */
#define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128
#define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138
/* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
* VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
#define USEM_REG_VFPF_ERR_NUM 0x300380
@ -4797,6 +4865,8 @@
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
/* [R 11] Parity register #0 read */
#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
/* [RC 11] Parity register #0 read clear */
#define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
/* [RW 3] The source that is associated with arbitration element 0. Source
@ -4929,6 +4999,9 @@
/* [R 32] Parity register #0 read */
#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
/* [RC 32] Parity register #0 read clear */
#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128
#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
@ -6316,3 +6389,4 @@ static inline u8 calc_crc8(u32 data, u8 crc)
}
#endif /* BNX2X_REG_H */

5
drivers/net/bnx2x/bnx2x_stats.c
View File

@ -158,6 +158,11 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
spin_lock_bh(&bp->stats_lock);
if (bp->stats_pending) {
spin_unlock_bh(&bp->stats_lock);
return;
}
ramrod_data.drv_counter = bp->stats_counter++;
ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
for_each_eth_queue(bp, i)

15
drivers/net/cxgb4vf/cxgb4vf_main.c
View File

@ -749,13 +749,19 @@ static int cxgb4vf_open(struct net_device *dev)
netif_set_real_num_tx_queues(dev, pi->nqsets);
err = netif_set_real_num_rx_queues(dev, pi->nqsets);
if (err)
return err;
set_bit(pi->port_id, &adapter->open_device_map);
goto err_unwind;
err = link_start(dev);
if (err)
return err;
goto err_unwind;
netif_tx_start_all_queues(dev);
set_bit(pi->port_id, &adapter->open_device_map);
return 0;
err_unwind:
if (adapter->open_device_map == 0)
adapter_down(adapter);
return err;
}
/*
@ -764,13 +770,12 @@ static int cxgb4vf_open(struct net_device *dev)
*/
static int cxgb4vf_stop(struct net_device *dev)
{
int ret;
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
netif_tx_stop_all_queues(dev);
netif_carrier_off(dev);
ret = t4vf_enable_vi(adapter, pi->viid, false, false);
t4vf_enable_vi(adapter, pi->viid, false, false);
pi->link_cfg.link_ok = 0;
clear_bit(pi->port_id, &adapter->open_device_map);

11
drivers/net/cxgb4vf/t4vf_hw.c
View File

@ -147,9 +147,20 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
/*
* Write the command array into the Mailbox Data register array and
* transfer ownership of the mailbox to the firmware.
*
* For the VFs, the Mailbox Data "registers" are actually backed by
* T4's "MA" interface rather than PL Registers (as is the case for
* the PFs). Because these are in different coherency domains, the
* write to the VF's PL-register-backed Mailbox Control can race in
* front of the writes to the MA-backed VF Mailbox Data "registers".
* So we need to do a read-back on at least one byte of the VF Mailbox
* Data registers before doing the write to the VF Mailbox Control
* register.
*/
for (i = 0, p = cmd; i < size; i += 8)
t4_write_reg64(adapter, mbox_data + i, be64_to_cpu(*p++));
t4_read_reg(adapter, mbox_data); /* flush write */
t4_write_reg(adapter, mbox_ctl,
MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
t4_read_reg(adapter, mbox_ctl); /* flush write */

328
drivers/net/e1000/e1000_hw.c
View File

@ -130,10 +130,15 @@ static s32 e1000_set_phy_type(struct e1000_hw *hw)
if (hw->mac_type == e1000_82541 ||
hw->mac_type == e1000_82541_rev_2 ||
hw->mac_type == e1000_82547 ||
hw->mac_type == e1000_82547_rev_2) {
hw->mac_type == e1000_82547_rev_2)
hw->phy_type = e1000_phy_igp;
break;
}
break;
case RTL8211B_PHY_ID:
hw->phy_type = e1000_phy_8211;
break;
case RTL8201N_PHY_ID:
hw->phy_type = e1000_phy_8201;
break;
default:
/* Should never have loaded on this device */
hw->phy_type = e1000_phy_undefined;
@ -318,6 +323,9 @@ s32 e1000_set_mac_type(struct e1000_hw *hw)
case E1000_DEV_ID_82547GI:
hw->mac_type = e1000_82547_rev_2;
break;
case E1000_DEV_ID_INTEL_CE4100_GBE:
hw->mac_type = e1000_ce4100;
break;
default:
/* Should never have loaded on this device */
return -E1000_ERR_MAC_TYPE;
@ -372,6 +380,9 @@ void e1000_set_media_type(struct e1000_hw *hw)
case e1000_82542_rev2_1:
hw->media_type = e1000_media_type_fiber;
break;
case e1000_ce4100:
hw->media_type = e1000_media_type_copper;
break;
default:
status = er32(STATUS);
if (status & E1000_STATUS_TBIMODE) {
@ -460,6 +471,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
/* Reset is performed on a shadow of the control register */
ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
break;
case e1000_ce4100:
default:
ew32(CTRL, (ctrl | E1000_CTRL_RST));
break;
@ -951,6 +963,67 @@ static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
return E1000_SUCCESS;
}
/**
* e1000_copper_link_rtl_setup - Copper link setup for e1000_phy_rtl series.
* @hw: Struct containing variables accessed by shared code
*
* Commits changes to PHY configuration by calling e1000_phy_reset().
*/
static s32 e1000_copper_link_rtl_setup(struct e1000_hw *hw)
{
s32 ret_val;
/* SW reset the PHY so all changes take effect */
ret_val = e1000_phy_reset(hw);
if (ret_val) {
e_dbg("Error Resetting the PHY\n");
return ret_val;
}
return E1000_SUCCESS;
}
static s32 gbe_dhg_phy_setup(struct e1000_hw *hw)
{
s32 ret_val;
u32 ctrl_aux;
switch (hw->phy_type) {
case e1000_phy_8211:
ret_val = e1000_copper_link_rtl_setup(hw);
if (ret_val) {
e_dbg("e1000_copper_link_rtl_setup failed!\n");
return ret_val;
}
break;
case e1000_phy_8201:
/* Set RMII mode */
ctrl_aux = er32(CTL_AUX);
ctrl_aux |= E1000_CTL_AUX_RMII;
ew32(CTL_AUX, ctrl_aux);
E1000_WRITE_FLUSH();
/* Disable the J/K bits required for receive */
ctrl_aux = er32(CTL_AUX);
ctrl_aux |= 0x4;
ctrl_aux &= ~0x2;
ew32(CTL_AUX, ctrl_aux);
E1000_WRITE_FLUSH();
ret_val = e1000_copper_link_rtl_setup(hw);
if (ret_val) {
e_dbg("e1000_copper_link_rtl_setup failed!\n");
return ret_val;
}
break;
default:
e_dbg("Error Resetting the PHY\n");
return E1000_ERR_PHY_TYPE;
}
return E1000_SUCCESS;
}
/**
* e1000_copper_link_preconfig - early configuration for copper
* @hw: Struct containing variables accessed by shared code
@ -1286,6 +1359,10 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
if (hw->autoneg_advertised == 0)
hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
/* IFE/RTL8201N PHY only supports 10/100 */
if (hw->phy_type == e1000_phy_8201)
hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
e_dbg("Reconfiguring auto-neg advertisement params\n");
ret_val = e1000_phy_setup_autoneg(hw);
if (ret_val) {
@ -1341,7 +1418,7 @@ static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
s32 ret_val;
e_dbg("e1000_copper_link_postconfig");
if (hw->mac_type >= e1000_82544) {
if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) {
e1000_config_collision_dist(hw);
} else {
ret_val = e1000_config_mac_to_phy(hw);
@ -1395,6 +1472,12 @@ static s32 e1000_setup_copper_link(struct e1000_hw *hw)
ret_val = e1000_copper_link_mgp_setup(hw);
if (ret_val)
return ret_val;
} else {
ret_val = gbe_dhg_phy_setup(hw);
if (ret_val) {
e_dbg("gbe_dhg_phy_setup failed!\n");
return ret_val;
}
}
if (hw->autoneg) {
@ -1461,10 +1544,11 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
return ret_val;
/* Read the MII 1000Base-T Control Register (Address 9). */
ret_val =
e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
else if (hw->phy_type == e1000_phy_8201)
mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
/* Need to parse both autoneg_advertised and fc and set up
* the appropriate PHY registers. First we will parse for
@ -1577,9 +1661,14 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
if (hw->phy_type == e1000_phy_8201) {
mii_1000t_ctrl_reg = 0;
} else {
ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
}
return E1000_SUCCESS;
}
@ -1860,7 +1949,7 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
/* 82544 or newer MAC, Auto Speed Detection takes care of
* MAC speed/duplex configuration.*/
if (hw->mac_type >= e1000_82544)
if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100))
return E1000_SUCCESS;
/* Read the Device Control Register and set the bits to Force Speed
@ -1870,27 +1959,49 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
/* Set up duplex in the Device Control and Transmit Control
* registers depending on negotiated values.
*/
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
if (ret_val)
return ret_val;
switch (hw->phy_type) {
case e1000_phy_8201:
ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
if (ret_val)
return ret_val;
if (phy_data & M88E1000_PSSR_DPLX)
ctrl |= E1000_CTRL_FD;
else
ctrl &= ~E1000_CTRL_FD;
if (phy_data & RTL_PHY_CTRL_FD)
ctrl |= E1000_CTRL_FD;
else
ctrl &= ~E1000_CTRL_FD;
e1000_config_collision_dist(hw);
if (phy_data & RTL_PHY_CTRL_SPD_100)
ctrl |= E1000_CTRL_SPD_100;
else
ctrl |= E1000_CTRL_SPD_10;
/* Set up speed in the Device Control register depending on
* negotiated values.
*/
if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
ctrl |= E1000_CTRL_SPD_1000;
else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
ctrl |= E1000_CTRL_SPD_100;
e1000_config_collision_dist(hw);
break;
default:
/* Set up duplex in the Device Control and Transmit Control
* registers depending on negotiated values.
*/
ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
&phy_data);
if (ret_val)
return ret_val;
if (phy_data & M88E1000_PSSR_DPLX)
ctrl |= E1000_CTRL_FD;
else
ctrl &= ~E1000_CTRL_FD;
e1000_config_collision_dist(hw);
/* Set up speed in the Device Control register depending on
* negotiated values.
*/
if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
ctrl |= E1000_CTRL_SPD_1000;
else if ((phy_data & M88E1000_PSSR_SPEED) ==
M88E1000_PSSR_100MBS)
ctrl |= E1000_CTRL_SPD_100;
}
/* Write the configured values back to the Device Control Reg. */
ew32(CTRL, ctrl);
@ -2401,7 +2512,8 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
* speed/duplex on the MAC to the current PHY speed/duplex
* settings.
*/
if (hw->mac_type >= e1000_82544)
if ((hw->mac_type >= e1000_82544) &&
(hw->mac_type != e1000_ce4100))
e1000_config_collision_dist(hw);
else {
ret_val = e1000_config_mac_to_phy(hw);
@ -2738,7 +2850,7 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
{
u32 i;
u32 mdic = 0;
const u32 phy_addr = 1;
const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
e_dbg("e1000_read_phy_reg_ex");
@ -2752,28 +2864,61 @@ static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
* Control register. The MAC will take care of interfacing with the
* PHY to retrieve the desired data.
*/
mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_READ));
if (hw->mac_type == e1000_ce4100) {
mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(INTEL_CE_GBE_MDIC_OP_READ) |
(INTEL_CE_GBE_MDIC_GO));
ew32(MDIC, mdic);
writel(mdic, E1000_MDIO_CMD);
/* Poll the ready bit to see if the MDI read completed */
for (i = 0; i < 64; i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
/* Poll the ready bit to see if the MDI read
* completed
*/
for (i = 0; i < 64; i++) {
udelay(50);
mdic = readl(E1000_MDIO_CMD);
if (!(mdic & INTEL_CE_GBE_MDIC_GO))
break;
}
if (mdic & INTEL_CE_GBE_MDIC_GO) {
e_dbg("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
mdic = readl(E1000_MDIO_STS);
if (mdic & INTEL_CE_GBE_MDIC_READ_ERROR) {
e_dbg("MDI Read Error\n");
return -E1000_ERR_PHY;
}
*phy_data = (u16) mdic;
} else {
mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_READ));
ew32(MDIC, mdic);
/* Poll the ready bit to see if the MDI read
* completed
*/
for (i = 0; i < 64; i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
}
if (!(mdic & E1000_MDIC_READY)) {
e_dbg("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
*phy_data = (u16) mdic;
}
if (!(mdic & E1000_MDIC_READY)) {
e_dbg("MDI Read did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
e_dbg("MDI Error\n");
return -E1000_ERR_PHY;
}
*phy_data = (u16) mdic;
} else {
/* We must first send a preamble through the MDIO pin to signal the
* beginning of an MII instruction. This is done by sending 32
@ -2840,7 +2985,7 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
{
u32 i;
u32 mdic = 0;
const u32 phy_addr = 1;
const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
e_dbg("e1000_write_phy_reg_ex");
@ -2850,27 +2995,54 @@ static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
}
if (hw->mac_type > e1000_82543) {
/* Set up Op-code, Phy Address, register address, and data intended
* for the PHY register in the MDI Control register. The MAC will take
* care of interfacing with the PHY to send the desired data.
/* Set up Op-code, Phy Address, register address, and data
* intended for the PHY register in the MDI Control register.
* The MAC will take care of interfacing with the PHY to send
* the desired data.
*/
mdic = (((u32) phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
if (hw->mac_type == e1000_ce4100) {
mdic = (((u32) phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(INTEL_CE_GBE_MDIC_OP_WRITE) |
(INTEL_CE_GBE_MDIC_GO));
ew32(MDIC, mdic);
writel(mdic, E1000_MDIO_CMD);
/* Poll the ready bit to see if the MDI read completed */
for (i = 0; i < 641; i++) {
udelay(5);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
}
if (!(mdic & E1000_MDIC_READY)) {
e_dbg("MDI Write did not complete\n");
return -E1000_ERR_PHY;
/* Poll the ready bit to see if the MDI read
* completed
*/
for (i = 0; i < 640; i++) {
udelay(5);
mdic = readl(E1000_MDIO_CMD);
if (!(mdic & INTEL_CE_GBE_MDIC_GO))
break;
}
if (mdic & INTEL_CE_GBE_MDIC_GO) {
e_dbg("MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
} else {
mdic = (((u32) phy_data) |
(reg_addr << E1000_MDIC_REG_SHIFT) |
(phy_addr << E1000_MDIC_PHY_SHIFT) |
(E1000_MDIC_OP_WRITE));
ew32(MDIC, mdic);
/* Poll the ready bit to see if the MDI read
* completed
*/
for (i = 0; i < 641; i++) {
udelay(5);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
}
if (!(mdic & E1000_MDIC_READY)) {
e_dbg("MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
}
} else {
/* We'll need to use the SW defined pins to shift the write command
@ -3048,6 +3220,11 @@ static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
if (hw->phy_id == M88E1011_I_PHY_ID)
match = true;
break;
case e1000_ce4100:
if ((hw->phy_id == RTL8211B_PHY_ID) ||
(hw->phy_id == RTL8201N_PHY_ID))
match = true;
break;
case e1000_82541:
case e1000_82541_rev_2:
case e1000_82547:
@ -3291,6 +3468,9 @@ s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
if (hw->phy_type == e1000_phy_igp)
return e1000_phy_igp_get_info(hw, phy_info);
else if ((hw->phy_type == e1000_phy_8211) ||
(hw->phy_type == e1000_phy_8201))
return E1000_SUCCESS;
else
return e1000_phy_m88_get_info(hw, phy_info);
}
@ -3742,6 +3922,12 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
e_dbg("e1000_read_eeprom");
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
data);
return E1000_SUCCESS;
}
/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
e1000_init_eeprom_params(hw);
@ -3904,6 +4090,12 @@ static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
e_dbg("e1000_write_eeprom");
if (hw->mac_type == e1000_ce4100) {
GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
data);
return E1000_SUCCESS;
}
/* If eeprom is not yet detected, do so now */
if (eeprom->word_size == 0)
e1000_init_eeprom_params(hw);

59
drivers/net/e1000/e1000_hw.h
View File

@ -52,6 +52,7 @@ typedef enum {
e1000_82545,
e1000_82545_rev_3,
e1000_82546,
e1000_ce4100,
e1000_82546_rev_3,
e1000_82541,
e1000_82541_rev_2,
@ -209,9 +210,11 @@ typedef enum {
} e1000_1000t_rx_status;
typedef enum {
e1000_phy_m88 = 0,
e1000_phy_igp,
e1000_phy_undefined = 0xFF
e1000_phy_m88 = 0,
e1000_phy_igp,
e1000_phy_8211,
e1000_phy_8201,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
typedef enum {
@ -442,6 +445,7 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
#define E1000_DEV_ID_82547EI 0x1019
#define E1000_DEV_ID_82547EI_MOBILE 0x101A
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
@ -808,6 +812,16 @@ struct e1000_ffvt_entry {
#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
#define E1000_FLA 0x0001C /* Flash Access - RW */
#define E1000_MDIC 0x00020 /* MDI Control - RW */
extern void __iomem *ce4100_gbe_mdio_base_virt;
#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt)
#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
#define E1000_MDC_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC)
#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20)
#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24)
#define E1000_SCTL 0x00024 /* SerDes Control - RW */
#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
@ -820,6 +834,34 @@ struct e1000_ffvt_entry {
#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
/* Auxiliary Control Register. This register is CE4100 specific,
* RMII/RGMII function is switched by this register - RW
* Following are bits definitions of the Auxiliary Control Register
*/
#define E1000_CTL_AUX 0x000E0
#define E1000_CTL_AUX_END_SEL_SHIFT 10
#define E1000_CTL_AUX_ENDIANESS_SHIFT 8
#define E1000_CTL_AUX_RGMII_RMII_SHIFT 0
/* descriptor and packet transfer use CTL_AUX.ENDIANESS */
#define E1000_CTL_AUX_DES_PKT (0x0 << E1000_CTL_AUX_END_SEL_SHIFT)
/* descriptor use CTL_AUX.ENDIANESS, packet use default */
#define E1000_CTL_AUX_DES (0x1 << E1000_CTL_AUX_END_SEL_SHIFT)
/* descriptor use default, packet use CTL_AUX.ENDIANESS */
#define E1000_CTL_AUX_PKT (0x2 << E1000_CTL_AUX_END_SEL_SHIFT)
/* all use CTL_AUX.ENDIANESS */
#define E1000_CTL_AUX_ALL (0x3 << E1000_CTL_AUX_END_SEL_SHIFT)
#define E1000_CTL_AUX_RGMII (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
#define E1000_CTL_AUX_RMII (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
/* LW little endian, Byte big endian */
#define E1000_CTL_AUX_LWLE_BBE (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT)
#define E1000_CTL_AUX_LWLE_BLE (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT)
#define E1000_CTL_AUX_LWBE_BBE (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT)
#define E1000_CTL_AUX_LWBE_BLE (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT)
#define E1000_RCTL 0x00100 /* RX Control - RW */
#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
@ -1011,6 +1053,7 @@ struct e1000_ffvt_entry {
* in more current versions of the 8254x. Despite the difference in location,
* the registers function in the same manner.
*/
#define E1000_82542_CTL_AUX E1000_CTL_AUX
#define E1000_82542_CTRL E1000_CTRL
#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
#define E1000_82542_STATUS E1000_STATUS
@ -1571,6 +1614,11 @@ struct e1000_hw {
#define E1000_MDIC_INT_EN 0x20000000
#define E1000_MDIC_ERROR 0x40000000
#define INTEL_CE_GBE_MDIC_OP_WRITE 0x04000000
#define INTEL_CE_GBE_MDIC_OP_READ 0x00000000
#define INTEL_CE_GBE_MDIC_GO 0x80000000
#define INTEL_CE_GBE_MDIC_READ_ERROR 0x80000000
#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
@ -2871,6 +2919,11 @@ struct e1000_host_command_info {
#define M88E1111_I_PHY_ID 0x01410CC0
#define L1LXT971A_PHY_ID 0x001378E0
#define RTL8211B_PHY_ID 0x001CC910
#define RTL8201N_PHY_ID 0x8200
#define RTL_PHY_CTRL_FD 0x0100 /* Full duplex.0=half; 1=full */
#define RTL_PHY_CTRL_SPD_100 0x200000 /* Force 100Mb */
/* Bits...
* 15-5: page
* 4-0: register offset

35
drivers/net/e1000/e1000_main.c
View File

@ -28,6 +28,12 @@
#include "e1000.h"
#include <net/ip6_checksum.h>
#include <linux/io.h>
/* Intel Media SOC GbE MDIO physical base address */
static unsigned long ce4100_gbe_mdio_base_phy;
/* Intel Media SOC GbE MDIO virtual base address */
void __iomem *ce4100_gbe_mdio_base_virt;
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
@ -79,6 +85,7 @@ static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
INTEL_E1000_ETHERNET_DEVICE(0x108A),
INTEL_E1000_ETHERNET_DEVICE(0x1099),
INTEL_E1000_ETHERNET_DEVICE(0x10B5),
INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
/* required last entry */
{0,}
};
@ -459,6 +466,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter)
case e1000_82545:
case e1000_82545_rev_3:
case e1000_82546:
case e1000_ce4100:
case e1000_82546_rev_3:
case e1000_82541:
case e1000_82541_rev_2:
@ -573,6 +581,7 @@ void e1000_reset(struct e1000_adapter *adapter)
case e1000_82545:
case e1000_82545_rev_3:
case e1000_82546:
case e1000_ce4100:
case e1000_82546_rev_3:
pba = E1000_PBA_48K;
break;
@ -894,6 +903,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
static int global_quad_port_a = 0; /* global ksp3 port a indication */
int i, err, pci_using_dac;
u16 eeprom_data = 0;
u16 tmp = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
int bars, need_ioport;
@ -996,6 +1006,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
goto err_sw_init;
err = -EIO;
if (hw->mac_type == e1000_ce4100) {
ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1);
ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy,
pci_resource_len(pdev, BAR_1));
if (!ce4100_gbe_mdio_base_virt)
goto err_mdio_ioremap;
}
if (hw->mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
@ -1135,6 +1153,20 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->wol = adapter->eeprom_wol;
device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* Auto detect PHY address */
if (hw->mac_type == e1000_ce4100) {
for (i = 0; i < 32; i++) {
hw->phy_addr = i;
e1000_read_phy_reg(hw, PHY_ID2, &tmp);
if (tmp == 0 || tmp == 0xFF) {
if (i == 31)
goto err_eeprom;
continue;
} else
break;
}
}
/* reset the hardware with the new settings */
e1000_reset(adapter);
@ -1171,6 +1203,8 @@ err_eeprom:
kfree(adapter->rx_ring);
err_dma:
err_sw_init:
err_mdio_ioremap:
iounmap(ce4100_gbe_mdio_base_virt);
iounmap(hw->hw_addr);
err_ioremap:
free_netdev(netdev);
@ -1409,6 +1443,7 @@ static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
/* First rev 82545 and 82546 need to not allow any memory
* write location to cross 64k boundary due to errata 23 */
if (hw->mac_type == e1000_82545 ||
hw->mac_type == e1000_ce4100 ||
hw->mac_type == e1000_82546) {
return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
}

19
drivers/net/e1000/e1000_osdep.h
View File

@ -34,12 +34,21 @@
#ifndef _E1000_OSDEP_H_
#define _E1000_OSDEP_H_
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#define CONFIG_RAM_BASE 0x60000
#define GBE_CONFIG_OFFSET 0x0
#define GBE_CONFIG_RAM_BASE \
((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET))
#define GBE_CONFIG_BASE_VIRT phys_to_virt(GBE_CONFIG_RAM_BASE)
#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \
(iowrite16_rep(base + offset, data, count))
#define GBE_CONFIG_FLASH_READ(base, offset, count, data) \
(ioread16_rep(base + (offset << 1), data, count))
#define er32(reg) \
(readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \

77
drivers/net/e1000e/82571.c
View File

@ -78,6 +78,8 @@ static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
/**
* e1000_init_phy_params_82571 - Init PHY func ptrs.
@ -113,6 +115,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
phy->type = e1000_phy_bm;
phy->ops.acquire = e1000_get_hw_semaphore_82574;
phy->ops.release = e1000_put_hw_semaphore_82574;
phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
break;
default:
return -E1000_ERR_PHY;
@ -121,29 +125,36 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
/* This can only be done after all function pointers are setup. */
ret_val = e1000_get_phy_id_82571(hw);
if (ret_val) {
e_dbg("Error getting PHY ID\n");
return ret_val;
}
/* Verify phy id */
switch (hw->mac.type) {
case e1000_82571:
case e1000_82572:
if (phy->id != IGP01E1000_I_PHY_ID)
return -E1000_ERR_PHY;
ret_val = -E1000_ERR_PHY;
break;
case e1000_82573:
if (phy->id != M88E1111_I_PHY_ID)
return -E1000_ERR_PHY;
ret_val = -E1000_ERR_PHY;
break;
case e1000_82574:
case e1000_82583:
if (phy->id != BME1000_E_PHY_ID_R2)
return -E1000_ERR_PHY;
ret_val = -E1000_ERR_PHY;
break;
default:
return -E1000_ERR_PHY;
ret_val = -E1000_ERR_PHY;
break;
}
return 0;
if (ret_val)
e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
return ret_val;
}
/**
@ -648,6 +659,58 @@ static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
mutex_unlock(&swflag_mutex);
}
/**
* e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
* @active: true to enable LPLU, false to disable
*
* Sets the LPLU D0 state according to the active flag.
* LPLU will not be activated unless the
* device autonegotiation advertisement meets standards of
* either 10 or 10/100 or 10/100/1000 at all duplexes.
* This is a function pointer entry point only called by
* PHY setup routines.
**/
static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
{
u16 data = er32(POEMB);
if (active)
data |= E1000_PHY_CTRL_D0A_LPLU;
else
data &= ~E1000_PHY_CTRL_D0A_LPLU;
ew32(POEMB, data);
return 0;
}
/**
* e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
* @hw: pointer to the HW structure
* @active: boolean used to enable/disable lplu
*
* The low power link up (lplu) state is set to the power management level D3
* when active is true, else clear lplu for D3. LPLU
* is used during Dx states where the power conservation is most important.
* During driver activity, SmartSpeed should be enabled so performance is
* maintained.
**/
static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
{
u16 data = er32(POEMB);
if (!active) {
data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
} else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
(hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
(hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
data |= E1000_PHY_CTRL_NOND0A_LPLU;
}
ew32(POEMB, data);
return 0;
}
/**
* e1000_acquire_nvm_82571 - Request for access to the EEPROM
* @hw: pointer to the HW structure
@ -956,7 +1019,7 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
**/
static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
{
u32 ctrl, ctrl_ext, icr;
u32 ctrl, ctrl_ext;
s32 ret_val;
/*
@ -1040,7 +1103,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
/* Clear any pending interrupt events. */
ew32(IMC, 0xffffffff);
icr = er32(ICR);
er32(ICR);
if (hw->mac.type == e1000_82571) {
/* Install any alternate MAC address into RAR0 */

3
drivers/net/e1000e/e1000.h
View File

@ -38,6 +38,7 @@
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/crc32.h>
#include "hw.h"
@ -496,6 +497,8 @@ extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
extern void e1000e_update_stats(struct e1000_adapter *adapter);
extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
extern unsigned int copybreak;

4
drivers/net/e1000e/es2lan.c
View File

@ -784,7 +784,7 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
**/
static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
{
u32 ctrl, icr;
u32 ctrl;
s32 ret_val;
/*
@ -818,7 +818,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
/* Clear any pending interrupt events. */
ew32(IMC, 0xffffffff);
icr = er32(ICR);
er32(ICR);
ret_val = e1000_check_alt_mac_addr_generic(hw);

54
drivers/net/e1000e/ethtool.c
View File

@ -624,20 +624,24 @@ static void e1000_get_drvinfo(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
char firmware_version[32];
strncpy(drvinfo->driver, e1000e_driver_name, 32);
strncpy(drvinfo->version, e1000e_driver_version, 32);
strncpy(drvinfo->driver, e1000e_driver_name,
sizeof(drvinfo->driver) - 1);
strncpy(drvinfo->version, e1000e_driver_version,
sizeof(drvinfo->version) - 1);
/*
* EEPROM image version # is reported as firmware version # for
* PCI-E controllers
*/
sprintf(firmware_version, "%d.%d-%d",
snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
(adapter->eeprom_vers & 0xF000) >> 12,
(adapter->eeprom_vers & 0x0FF0) >> 4,
(adapter->eeprom_vers & 0x000F));
strncpy(drvinfo->fw_version, firmware_version, 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
strncpy(drvinfo->fw_version, firmware_version,
sizeof(drvinfo->fw_version) - 1);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info) - 1);
drvinfo->regdump_len = e1000_get_regs_len(netdev);
drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
}
@ -1704,6 +1708,19 @@ static void e1000_diag_test(struct net_device *netdev,
bool if_running = netif_running(netdev);
set_bit(__E1000_TESTING, &adapter->state);
if (!if_running) {
/* Get control of and reset hardware */
if (adapter->flags & FLAG_HAS_AMT)
e1000e_get_hw_control(adapter);
e1000e_power_up_phy(adapter);
adapter->hw.phy.autoneg_wait_to_complete = 1;
e1000e_reset(adapter);
adapter->hw.phy.autoneg_wait_to_complete = 0;
}
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
/* Offline tests */
@ -1717,8 +1734,6 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
/* indicate we're in test mode */
dev_close(netdev);
else
e1000e_reset(adapter);
if (e1000_reg_test(adapter, &data[0]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@ -1732,8 +1747,6 @@ static void e1000_diag_test(struct net_device *netdev,
eth_test->flags |= ETH_TEST_FL_FAILED;
e1000e_reset(adapter);
/* make sure the phy is powered up */
e1000e_power_up_phy(adapter);
if (e1000_loopback_test(adapter, &data[3]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@ -1755,28 +1768,29 @@ static void e1000_diag_test(struct net_device *netdev,
if (if_running)
dev_open(netdev);
} else {
if (!if_running && (adapter->flags & FLAG_HAS_AMT)) {
clear_bit(__E1000_TESTING, &adapter->state);
dev_open(netdev);
set_bit(__E1000_TESTING, &adapter->state);
}
/* Online tests */
e_info("online testing starting\n");
/* Online tests */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
/* Online tests aren't run; pass by default */
/* register, eeprom, intr and loopback tests not run online */
data[0] = 0;
data[1] = 0;
data[2] = 0;
data[3] = 0;
if (!if_running && (adapter->flags & FLAG_HAS_AMT))
dev_close(netdev);
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
clear_bit(__E1000_TESTING, &adapter->state);
}
if (!if_running) {
e1000e_reset(adapter);
if (adapter->flags & FLAG_HAS_AMT)
e1000e_release_hw_control(adapter);
}
msleep_interruptible(4 * 1000);
}

1
drivers/net/e1000e/hw.h
View File

@ -83,6 +83,7 @@ enum e1e_registers {
E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */
E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */
E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */
#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */
E1000_PBS = 0x01008, /* Packet Buffer Size */
E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */

77
drivers/net/e1000e/ich8lan.c
View File

@ -1395,22 +1395,6 @@ void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
}
}
static u32 e1000_calc_rx_da_crc(u8 mac[])
{
u32 poly = 0xEDB88320; /* Polynomial for 802.3 CRC calculation */
u32 i, j, mask, crc;
crc = 0xffffffff;
for (i = 0; i < 6; i++) {
crc = crc ^ mac[i];
for (j = 8; j > 0; j--) {
mask = (crc & 1) * (-1);
crc = (crc >> 1) ^ (poly & mask);
}
}
return ~crc;
}
/**
* e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
* with 82579 PHY
@ -1453,8 +1437,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
mac_addr[4] = (addr_high & 0xFF);
mac_addr[5] = ((addr_high >> 8) & 0xFF);
ew32(PCH_RAICC(i),
e1000_calc_rx_da_crc(mac_addr));
ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
}
/* Write Rx addresses to the PHY */
@ -2977,7 +2960,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
u16 reg;
u32 ctrl, icr, kab;
u32 ctrl, kab;
s32 ret_val;
/*
@ -3067,7 +3050,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ew32(CRC_OFFSET, 0x65656565);
ew32(IMC, 0xffffffff);
icr = er32(ICR);
er32(ICR);
kab = er32(KABGTXD);
kab |= E1000_KABGTXD_BGSQLBIAS;
@ -3118,7 +3101,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
* Reset the phy after disabling host wakeup to reset the Rx buffer.
*/
if (hw->phy.type == e1000_phy_82578) {
hw->phy.ops.read_reg(hw, BM_WUC, &i);
e1e_rphy(hw, BM_WUC, &i);
ret_val = e1000_phy_hw_reset_ich8lan(hw);
if (ret_val)
return ret_val;
@ -3276,9 +3259,8 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
(hw->phy.type == e1000_phy_82577)) {
ew32(FCRTV_PCH, hw->fc.refresh_time);
ret_val = hw->phy.ops.write_reg(hw,
PHY_REG(BM_PORT_CTRL_PAGE, 27),
hw->fc.pause_time);
ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
hw->fc.pause_time);
if (ret_val)
return ret_val;
}
@ -3342,8 +3324,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
return ret_val;
break;
case e1000_phy_ife:
ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
&reg_data);
ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &reg_data);
if (ret_val)
return ret_val;
@ -3361,8 +3342,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
reg_data |= IFE_PMC_AUTO_MDIX;
break;
}
ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
reg_data);
ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
if (ret_val)
return ret_val;
break;
@ -3646,7 +3626,8 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
{
if (hw->phy.type == e1000_phy_ife)
return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
(IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
(IFE_PSCL_PROBE_MODE |
IFE_PSCL_PROBE_LEDS_OFF));
ew32(LEDCTL, hw->mac.ledctl_mode1);
return 0;
@ -3660,8 +3641,7 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
**/
static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
{
return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
(u16)hw->mac.ledctl_mode1);
return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
}
/**
@ -3672,8 +3652,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
**/
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
{
return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
(u16)hw->mac.ledctl_default);
return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
}
/**
@ -3704,7 +3683,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
}
}
return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
return e1e_wphy(hw, HV_LED_CONFIG, data);
}
/**
@ -3735,7 +3714,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
}
}
return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
return e1e_wphy(hw, HV_LED_CONFIG, data);
}
/**
@ -3844,20 +3823,20 @@ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
if ((hw->phy.type == e1000_phy_82578) ||
(hw->phy.type == e1000_phy_82579) ||
(hw->phy.type == e1000_phy_82577)) {
hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data);
hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data);
hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data);
e1e_rphy(hw, HV_SCC_UPPER, &phy_data);
e1e_rphy(hw, HV_SCC_LOWER, &phy_data);
e1e_rphy(hw, HV_ECOL_UPPER, &phy_data);
e1e_rphy(hw, HV_ECOL_LOWER, &phy_data);
e1e_rphy(hw, HV_MCC_UPPER, &phy_data);
e1e_rphy(hw, HV_MCC_LOWER, &phy_data);
e1e_rphy(hw, HV_LATECOL_UPPER, &phy_data);
e1e_rphy(hw, HV_LATECOL_LOWER, &phy_data);
e1e_rphy(hw, HV_COLC_UPPER, &phy_data);
e1e_rphy(hw, HV_COLC_LOWER, &phy_data);
e1e_rphy(hw, HV_DC_UPPER, &phy_data);
e1e_rphy(hw, HV_DC_LOWER, &phy_data);
e1e_rphy(hw, HV_TNCRS_UPPER, &phy_data);
e1e_rphy(hw, HV_TNCRS_LOWER, &phy_data);
}
}

3
drivers/net/e1000e/lib.c
View File

@ -1135,7 +1135,8 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
ret_val =
e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
if (ret_val)
return ret_val;

53
drivers/net/e1000e/netdev.c
View File

@ -1980,15 +1980,15 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
}
/**
* e1000_get_hw_control - get control of the h/w from f/w
* e1000e_get_hw_control - get control of the h/w from f/w
* @adapter: address of board private structure
*
* e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that
* the driver is loaded. For AMT version (only with 82573)
* of the f/w this means that the network i/f is open.
**/
static void e1000_get_hw_control(struct e1000_adapter *adapter)
void e1000e_get_hw_control(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_ext;
@ -2005,16 +2005,16 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter)
}
/**
* e1000_release_hw_control - release control of the h/w to f/w
* e1000e_release_hw_control - release control of the h/w to f/w
* @adapter: address of board private structure
*
* e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
* For ASF and Pass Through versions of f/w this means that the
* driver is no longer loaded. For AMT version (only with 82573) i
* of the f/w this means that the network i/f is closed.
*
**/
static void e1000_release_hw_control(struct e1000_adapter *adapter)
void e1000e_release_hw_control(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 ctrl_ext;
@ -2445,7 +2445,7 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
(vid == adapter->mng_vlan_id)) {
/* release control to f/w */
e1000_release_hw_control(adapter);
e1000e_release_hw_control(adapter);
return;
}
@ -2734,6 +2734,9 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
else
ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
if (ret_val)
e_dbg("failed to enable jumbo frame workaround mode\n");
}
/* Program MC offset vector base */
@ -3184,7 +3187,6 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(PBA, pba);
}
/*
* flow control settings
*
@ -3272,7 +3274,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
* that the network interface is in control
*/
if (adapter->flags & FLAG_HAS_AMT)
e1000_get_hw_control(adapter);
e1000e_get_hw_control(adapter);
ew32(WUC, 0);
@ -3285,6 +3287,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
ew32(VET, ETH_P_8021Q);
e1000e_reset_adaptive(hw);
if (!netif_running(adapter->netdev) &&
!test_bit(__E1000_TESTING, &adapter->state)) {
e1000_power_down_phy(adapter);
return;
}
e1000_get_phy_info(hw);
if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
@ -3570,7 +3579,7 @@ static int e1000_open(struct net_device *netdev)
* interface is now open and reset the part to a known state.
*/
if (adapter->flags & FLAG_HAS_AMT) {
e1000_get_hw_control(adapter);
e1000e_get_hw_control(adapter);
e1000e_reset(adapter);
}
@ -3634,7 +3643,7 @@ static int e1000_open(struct net_device *netdev)
return 0;
err_req_irq:
e1000_release_hw_control(adapter);
e1000e_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000e_free_rx_resources(adapter);
err_setup_rx:
@ -3689,8 +3698,9 @@ static int e1000_close(struct net_device *netdev)
* If AMT is enabled, let the firmware know that the network
* interface is now closed
*/
if (adapter->flags & FLAG_HAS_AMT)
e1000_release_hw_control(adapter);
if ((adapter->flags & FLAG_HAS_AMT) &&
!test_bit(__E1000_TESTING, &adapter->state))
e1000e_release_hw_control(adapter);
if ((adapter->flags & FLAG_HAS_ERT) ||
(adapter->hw.mac.type == e1000_pch2lan))
@ -5209,7 +5219,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
e1000_release_hw_control(adapter);
e1000e_release_hw_control(adapter);
pci_disable_device(pdev);
@ -5366,7 +5376,7 @@ static int __e1000_resume(struct pci_dev *pdev)
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
e1000e_get_hw_control(adapter);
return 0;
}
@ -5613,7 +5623,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
e1000e_get_hw_control(adapter);
}
@ -5636,7 +5646,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
ret_val = e1000_read_pba_string_generic(hw, pba_str,
E1000_PBANUM_LENGTH);
if (ret_val)
strcpy(pba_str, "Unknown");
strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
e_info("MAC: %d, PHY: %d, PBA No: %s\n",
hw->mac.type, hw->phy.type, pba_str);
}
@ -5963,9 +5973,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
* under the control of the driver.
*/
if (!(adapter->flags & FLAG_HAS_AMT))
e1000_get_hw_control(adapter);
e1000e_get_hw_control(adapter);
strcpy(netdev->name, "eth%d");
strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
err = register_netdev(netdev);
if (err)
goto err_register;
@ -5982,12 +5992,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
err_register:
if (!(adapter->flags & FLAG_HAS_AMT))
e1000_release_hw_control(adapter);
e1000e_release_hw_control(adapter);
err_eeprom:
if (!e1000_check_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
err_hw_init:
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
@ -6053,7 +6062,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant.
*/
e1000_release_hw_control(adapter);
e1000e_release_hw_control(adapter);
e1000e_reset_interrupt_capability(adapter);
kfree(adapter->tx_ring);

40
drivers/net/e1000e/phy.c
View File

@ -637,12 +637,11 @@ s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
**/
s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u16 phy_data;
/* Enable CRS on TX. This must be set for half-duplex operation. */
ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
if (ret_val)
goto out;
@ -651,7 +650,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
/* Enable downshift */
phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
out:
return ret_val;
@ -774,16 +773,14 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
}
if (phy->type == e1000_phy_82578) {
ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
&phy_data);
ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
if (ret_val)
return ret_val;
/* 82578 PHY - set the downshift count to 1x. */
phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
phy_data);
ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
if (ret_val)
return ret_val;
}
@ -1319,9 +1316,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
* We didn't get link.
* Reset the DSP and cross our fingers.
*/
ret_val = e1e_wphy(hw,
M88E1000_PHY_PAGE_SELECT,
0x001d);
ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
0x001d);
if (ret_val)
return ret_val;
ret_val = e1000e_phy_reset_dsp(hw);
@ -3071,12 +3067,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
goto out;
/* Do not apply workaround if in PHY loopback bit 14 set */
hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
e1e_rphy(hw, PHY_CONTROL, &data);
if (data & PHY_CONTROL_LB)
goto out;
/* check if link is up and at 1Gbps */
ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
if (ret_val)
goto out;
@ -3092,14 +3088,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
mdelay(200);
/* flush the packets in the fifo buffer */
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
HV_MUX_DATA_CTRL_GEN_TO_MAC |
HV_MUX_DATA_CTRL_FORCE_SPEED);
ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
HV_MUX_DATA_CTRL_FORCE_SPEED);
if (ret_val)
goto out;
ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
HV_MUX_DATA_CTRL_GEN_TO_MAC);
ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
out:
return ret_val;
@ -3119,7 +3113,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw)
s32 ret_val;
u16 data;
ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (!ret_val)
phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@ -3142,13 +3136,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
u16 phy_data;
bool link;
ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
if (ret_val)
goto out;
e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
if (ret_val)
goto out;
@ -3212,7 +3206,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
if (ret_val)
goto out;
@ -3224,7 +3218,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
if (ret_val)
goto out;
ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
if (ret_val)
goto out;
@ -3258,7 +3252,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
s32 ret_val;
u16 phy_data, length;
ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
if (ret_val)
goto out;

2
drivers/net/ehea/ehea.h
View File

@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
#define DRV_VERSION "EHEA_0106"
#define DRV_VERSION "EHEA_0107"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1

6
drivers/net/ehea/ehea_main.c
View File

@ -437,7 +437,7 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
}
}
/* Ring doorbell */
ehea_update_rq1a(pr->qp, i);
ehea_update_rq1a(pr->qp, i - 1);
}
static int ehea_refill_rq_def(struct ehea_port_res *pr,
@ -1329,9 +1329,7 @@ static int ehea_fill_port_res(struct ehea_port_res *pr)
int ret;
struct ehea_qp_init_attr *init_attr = &pr->qp->init_attr;
ehea_init_fill_rq1(pr, init_attr->act_nr_rwqes_rq1
- init_attr->act_nr_rwqes_rq2
- init_attr->act_nr_rwqes_rq3 - 1);
ehea_init_fill_rq1(pr, pr->rq1_skba.len);
ret = ehea_refill_rq2(pr, init_attr->act_nr_rwqes_rq2 - 1);

246
drivers/net/fec.c
View File

@ -17,6 +17,8 @@
*
* Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
* Copyright (c) 2004-2006 Macq Electronique SA.
*
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*/
#include <linux/module.h>
@ -45,29 +47,41 @@
#include <asm/cacheflush.h>
#ifndef CONFIG_ARCH_MXC
#ifndef CONFIG_ARM
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#endif
#include "fec.h"
#ifdef CONFIG_ARCH_MXC
#include <mach/hardware.h>
#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
#define FEC_ALIGNMENT 0xf
#else
#define FEC_ALIGNMENT 0x3
#endif
/*
* Define the fixed address of the FEC hardware.
*/
#if defined(CONFIG_M5272)
#define DRIVER_NAME "fec"
static unsigned char fec_mac_default[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* Controller is ENET-MAC */
#define FEC_QUIRK_ENET_MAC (1 << 0)
/* Controller needs driver to swap frame */
#define FEC_QUIRK_SWAP_FRAME (1 << 1)
static struct platform_device_id fec_devtype[] = {
{
.name = DRIVER_NAME,
.driver_data = 0,
}, {
.name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME,
}
};
static unsigned char macaddr[ETH_ALEN];
module_param_array(macaddr, byte, NULL, 0);
MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
#if defined(CONFIG_M5272)
/*
* Some hardware gets it MAC address out of local flash memory.
* if this is non-zero then assume it is the address to get MAC from.
@ -133,7 +147,8 @@ static unsigned char fec_mac_default[] = {
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
@ -186,7 +201,6 @@ struct fec_enet_private {
int mii_timeout;
uint phy_speed;
phy_interface_t phy_interface;
int index;
int link;
int full_duplex;
struct completion mdio_done;
@ -213,10 +227,23 @@ static void fec_stop(struct net_device *dev);
/* Transmitter timeout */
#define TX_TIMEOUT (2 * HZ)
static void *swap_buffer(void *bufaddr, int len)
{
int i;
unsigned int *buf = bufaddr;
for (i = 0; i < (len + 3) / 4; i++, buf++)
*buf = cpu_to_be32(*buf);
return bufaddr;
}
static netdev_tx_t
fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
struct bufdesc *bdp;
void *bufaddr;
unsigned short status;
@ -261,6 +288,14 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
bufaddr = fep->tx_bounce[index];
}
/*
* Some design made an incorrect assumption on endian mode of
* the system that it's running on. As the result, driver has to
* swap every frame going to and coming from the controller.
*/
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
swap_buffer(bufaddr, skb->len);
/* Save skb pointer */
fep->tx_skbuff[fep->skb_cur] = skb;
@ -429,6 +464,8 @@ static void
fec_enet_rx(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
struct bufdesc *bdp;
unsigned short status;
struct sk_buff *skb;
@ -492,6 +529,9 @@ fec_enet_rx(struct net_device *dev)
dma_unmap_single(NULL, bdp->cbd_bufaddr, bdp->cbd_datlen,
DMA_FROM_DEVICE);
if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
swap_buffer(data, pkt_len);
/* This does 16 byte alignment, exactly what we need.
* The packet length includes FCS, but we don't want to
* include that when passing upstream as it messes up
@ -538,37 +578,50 @@ rx_processing_done:
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
unsigned char *iap, tmpaddr[ETH_ALEN];
if (FEC_FLASHMAC) {
/*
* Get MAC address from FLASH.
* If it is all 1's or 0's, use the default.
*/
iap = (unsigned char *)FEC_FLASHMAC;
if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
(iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
iap = fec_mac_default;
if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
(iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
iap = fec_mac_default;
} else {
*((unsigned long *) &tmpaddr[0]) = readl(fep->hwp + FEC_ADDR_LOW);
*((unsigned short *) &tmpaddr[4]) = (readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
/*
* try to get mac address in following order:
*
* 1) module parameter via kernel command line in form
* fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0
*/
iap = macaddr;
/*
* 2) from flash or fuse (via platform data)
*/
if (!is_valid_ether_addr(iap)) {
#ifdef CONFIG_M5272
if (FEC_FLASHMAC)
iap = (unsigned char *)FEC_FLASHMAC;
#else
if (pdata)
memcpy(iap, pdata->mac, ETH_ALEN);
#endif
}
/*
* 3) FEC mac registers set by bootloader
*/
if (!is_valid_ether_addr(iap)) {
*((unsigned long *) &tmpaddr[0]) =
be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW));
*((unsigned short *) &tmpaddr[4]) =
be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16);
iap = &tmpaddr[0];
}
memcpy(dev->dev_addr, iap, ETH_ALEN);
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
/* Adjust MAC if using macaddr */
if (iap == macaddr)
dev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id;
}
#endif
/* ------------------------------------------------------------------------- */
@ -651,8 +704,8 @@ static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
fep->mii_timeout = 0;
init_completion(&fep->mdio_done);
/* start a read op */
writel(FEC_MMFR_ST | FEC_MMFR_OP_READ |
/* start a write op */
writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE |
FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) |
FEC_MMFR_TA | FEC_MMFR_DATA(value),
fep->hwp + FEC_MII_DATA);
@ -681,6 +734,7 @@ static int fec_enet_mii_probe(struct net_device *dev)
char mdio_bus_id[MII_BUS_ID_SIZE];
char phy_name[MII_BUS_ID_SIZE + 3];
int phy_id;
int dev_id = fep->pdev->id;
fep->phy_dev = NULL;
@ -692,6 +746,8 @@ static int fec_enet_mii_probe(struct net_device *dev)
continue;
if (fep->mii_bus->phy_map[phy_id]->phy_id == 0)
continue;
if (dev_id--)
continue;
strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE);
break;
}
@ -729,10 +785,35 @@ static int fec_enet_mii_probe(struct net_device *dev)
static int fec_enet_mii_init(struct platform_device *pdev)
{
static struct mii_bus *fec0_mii_bus;
struct net_device *dev = platform_get_drvdata(pdev);
struct fec_enet_private *fep = netdev_priv(dev);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
int err = -ENXIO, i;
/*
* The dual fec interfaces are not equivalent with enet-mac.
* Here are the differences:
*
* - fec0 supports MII & RMII modes while fec1 only supports RMII
* - fec0 acts as the 1588 time master while fec1 is slave
* - external phys can only be configured by fec0
*
* That is to say fec1 can not work independently. It only works
* when fec0 is working. The reason behind this design is that the
* second interface is added primarily for Switch mode.
*
* Because of the last point above, both phys are attached on fec0
* mdio interface in board design, and need to be configured by
* fec0 mii_bus.
*/
if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id) {
/* fec1 uses fec0 mii_bus */
fep->mii_bus = fec0_mii_bus;
return 0;
}
fep->mii_timeout = 0;
/*
@ -769,6 +850,10 @@ static int fec_enet_mii_init(struct platform_device *pdev)
if (mdiobus_register(fep->mii_bus))
goto err_out_free_mdio_irq;
/* save fec0 mii_bus */
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC)
fec0_mii_bus = fep->mii_bus;
return 0;
err_out_free_mdio_irq:
@ -1067,9 +1152,8 @@ static const struct net_device_ops fec_netdev_ops = {
/*
* XXX: We need to clean up on failure exits here.
*
* index is only used in legacy code
*/
static int fec_enet_init(struct net_device *dev, int index)
static int fec_enet_init(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct bufdesc *cbd_base;
@ -1086,26 +1170,11 @@ static int fec_enet_init(struct net_device *dev, int index)
spin_lock_init(&fep->hw_lock);
fep->index = index;
fep->hwp = (void __iomem *)dev->base_addr;
fep->netdev = dev;
/* Set the Ethernet address */
#ifdef CONFIG_M5272
/* Get the Ethernet address */
fec_get_mac(dev);
#else
{
unsigned long l;
l = readl(fep->hwp + FEC_ADDR_LOW);
dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
l = readl(fep->hwp + FEC_ADDR_HIGH);
dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
}
#endif
/* Set receive and transmit descriptor base. */
fep->rx_bd_base = cbd_base;
@ -1156,12 +1225,25 @@ static void
fec_restart(struct net_device *dev, int duplex)
{
struct fec_enet_private *fep = netdev_priv(dev);
const struct platform_device_id *id_entry =
platform_get_device_id(fep->pdev);
int i;
u32 val, temp_mac[2];
/* Whack a reset. We should wait for this. */
writel(1, fep->hwp + FEC_ECNTRL);
udelay(10);
/*
* enet-mac reset will reset mac address registers too,
* so need to reconfigure it.
*/
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
memcpy(&temp_mac, dev->dev_addr, ETH_ALEN);
writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW);
writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH);
}
/* Clear any outstanding interrupt. */
writel(0xffc00000, fep->hwp + FEC_IEVENT);
@ -1208,20 +1290,45 @@ fec_restart(struct net_device *dev, int duplex)
/* Set MII speed */
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
/*
* The phy interface and speed need to get configured
* differently on enet-mac.
*/
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
val = readl(fep->hwp + FEC_R_CNTRL);
/* MII or RMII */
if (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
val |= (1 << 8);
else
val &= ~(1 << 8);
/* 10M or 100M */
if (fep->phy_dev && fep->phy_dev->speed == SPEED_100)
val &= ~(1 << 9);
else
val |= (1 << 9);
writel(val, fep->hwp + FEC_R_CNTRL);
} else {
#ifdef FEC_MIIGSK_ENR
if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
udelay(1);
if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) {
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
udelay(1);
/* configure the gasket: RMII, 50 MHz, no loopback, no echo */
writel(1, fep->hwp + FEC_MIIGSK_CFGR);
/*
* configure the gasket:
* RMII, 50 MHz, no loopback, no echo
*/
writel(1, fep->hwp + FEC_MIIGSK_CFGR);
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);
}
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);
}
#endif
}
/* And last, enable the transmit and receive processing */
writel(2, fep->hwp + FEC_ECNTRL);
@ -1316,7 +1423,7 @@ fec_probe(struct platform_device *pdev)
}
clk_enable(fep->clk);
ret = fec_enet_init(ndev, 0);
ret = fec_enet_init(ndev);
if (ret)
goto failed_init;
@ -1380,8 +1487,10 @@ fec_suspend(struct device *dev)
if (ndev) {
fep = netdev_priv(ndev);
if (netif_running(ndev))
fec_enet_close(ndev);
if (netif_running(ndev)) {
fec_stop(ndev);
netif_device_detach(ndev);
}
clk_disable(fep->clk);
}
return 0;
@ -1396,8 +1505,10 @@ fec_resume(struct device *dev)
if (ndev) {
fep = netdev_priv(ndev);
clk_enable(fep->clk);
if (netif_running(ndev))
fec_enet_open(ndev);
if (netif_running(ndev)) {
fec_restart(ndev, fep->full_duplex);
netif_device_attach(ndev);
}
}
return 0;
}
@ -1414,12 +1525,13 @@ static const struct dev_pm_ops fec_pm_ops = {
static struct platform_driver fec_driver = {
.driver = {
.name = "fec",
.name = DRIVER_NAME,
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &fec_pm_ops,
#endif
},
.id_table = fec_devtype,
.probe = fec_probe,
.remove = __devexit_p(fec_drv_remove),
};

5
drivers/net/fec.h
View File

@ -14,7 +14,8 @@
/****************************************************************************/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
@ -78,7 +79,7 @@
/*
* Define the buffer descriptor structure.
*/
#ifdef CONFIG_ARCH_MXC
#if defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
struct bufdesc {
unsigned short cbd_datlen; /* Data length */
unsigned short cbd_sc; /* Control and status info */

34
drivers/net/forcedeth.c
View File

@ -3949,6 +3949,7 @@ static int nv_set_wol(struct net_device *dev, struct ethtool_wolinfo *wolinfo)
writel(flags, base + NvRegWakeUpFlags);
spin_unlock_irq(&np->lock);
}
device_set_wakeup_enable(&np->pci_dev->dev, np->wolenabled);
return 0;
}
@ -5488,14 +5489,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
/* set mac address */
nv_copy_mac_to_hw(dev);
/* Workaround current PCI init glitch: wakeup bits aren't
* being set from PCI PM capability.
*/
device_init_wakeup(&pci_dev->dev, 1);
/* disable WOL */
writel(0, base + NvRegWakeUpFlags);
np->wolenabled = 0;
device_set_wakeup_enable(&pci_dev->dev, false);
if (id->driver_data & DEV_HAS_POWER_CNTRL) {
@ -5746,8 +5743,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
}
#ifdef CONFIG_PM
static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
static int nv_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
@ -5763,25 +5761,17 @@ static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
for (i = 0; i <= np->register_size/sizeof(u32); i++)
np->saved_config_space[i] = readl(base + i*sizeof(u32));
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), np->wolenabled);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int nv_resume(struct pci_dev *pdev)
static int nv_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct net_device *dev = pci_get_drvdata(pdev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
int i, rc = 0;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
/* ack any pending wake events, disable PME */
pci_enable_wake(pdev, PCI_D0, 0);
/* restore non-pci configuration space */
for (i = 0; i <= np->register_size/sizeof(u32); i++)
writel(np->saved_config_space[i], base+i*sizeof(u32));
@ -5800,6 +5790,9 @@ static int nv_resume(struct pci_dev *pdev)
return rc;
}
static SIMPLE_DEV_PM_OPS(nv_pm_ops, nv_suspend, nv_resume);
#define NV_PM_OPS (&nv_pm_ops)
static void nv_shutdown(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
@ -5822,15 +5815,13 @@ static void nv_shutdown(struct pci_dev *pdev)
* only put the device into D3 if we really go for poweroff.
*/
if (system_state == SYSTEM_POWER_OFF) {
if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
pci_wake_from_d3(pdev, np->wolenabled);
pci_set_power_state(pdev, PCI_D3hot);
}
}
#else
#define nv_suspend NULL
#define NV_PM_OPS NULL
#define nv_shutdown NULL
#define nv_resume NULL
#endif /* CONFIG_PM */
static DEFINE_PCI_DEVICE_TABLE(pci_tbl) = {
@ -6002,9 +5993,8 @@ static struct pci_driver driver = {
.id_table = pci_tbl,
.probe = nv_probe,
.remove = __devexit_p(nv_remove),
.suspend = nv_suspend,
.resume = nv_resume,
.shutdown = nv_shutdown,
.driver.pm = NV_PM_OPS,
};
static int __init init_nic(void)

4
drivers/net/hamradio/yam.c
View File

@ -396,7 +396,7 @@ static unsigned char *add_mcs(unsigned char *bits, int bitrate,
while (p) {
if (p->bitrate == bitrate) {
memcpy(p->bits, bits, YAM_FPGA_SIZE);
return p->bits;
goto out;
}
p = p->next;
}
@ -411,7 +411,7 @@ static unsigned char *add_mcs(unsigned char *bits, int bitrate,
p->bitrate = bitrate;
p->next = yam_data;
yam_data = p;
out:
release_firmware(fw);
return p->bits;
}

21
drivers/net/ixgbe/ixgbe.h
View File

@ -508,6 +508,8 @@ extern void ixgbe_free_rx_resources(struct ixgbe_ring *);
extern void ixgbe_free_tx_resources(struct ixgbe_ring *);
extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
struct ixgbe_ring *);
extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
@ -524,26 +526,13 @@ extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input *input,
union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common,
u8 queue);
extern s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input *input,
union ixgbe_atr_input *input,
struct ixgbe_atr_input_masks *input_masks,
u16 soft_id, u8 queue);
extern s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input,
u16 vlan_id);
extern s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input,
u32 src_addr);
extern s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input,
u32 dst_addr);
extern s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input,
u16 src_port);
extern s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input,
u16 dst_port);
extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
u16 flex_byte);
extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
u8 l4type);
extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring);
extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,

759
drivers/net/ixgbe/ixgbe_82599.c
View File

@ -1003,7 +1003,7 @@ s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
udelay(10);
}
if (i >= IXGBE_FDIRCMD_CMD_POLL) {
hw_dbg(hw ,"Flow Director previous command isn't complete, "
hw_dbg(hw, "Flow Director previous command isn't complete, "
"aborting table re-initialization.\n");
return IXGBE_ERR_FDIR_REINIT_FAILED;
}
@ -1113,13 +1113,10 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
/* Move the flexible bytes to use the ethertype - shift 6 words */
fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS;
/* Prime the keys for hashing */
IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
htonl(IXGBE_ATR_BUCKET_HASH_KEY));
IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
/*
* Poll init-done after we write the register. Estimated times:
@ -1209,10 +1206,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT);
/* Prime the keys for hashing */
IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY,
htonl(IXGBE_ATR_BUCKET_HASH_KEY));
IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY,
htonl(IXGBE_ATR_SIGNATURE_HASH_KEY));
IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
/*
* Poll init-done after we write the register. Estimated times:
@ -1251,8 +1246,8 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
* @stream: input bitstream to compute the hash on
* @key: 32-bit hash key
**/
static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
u32 key)
static u32 ixgbe_atr_compute_hash_82599(union ixgbe_atr_input *atr_input,
u32 key)
{
/*
* The algorithm is as follows:
@ -1272,409 +1267,249 @@ static u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input,
* To simplify for programming, the algorithm is implemented
* in software this way:
*
* Key[31:0], Stream[335:0]
* key[31:0], hi_hash_dword[31:0], lo_hash_dword[31:0], hash[15:0]
*
* tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times
* int_key[350:0] = tmp_key[351:1]
* int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321]
* for (i = 0; i < 352; i+=32)
* hi_hash_dword[31:0] ^= Stream[(i+31):i];
*
* hash[15:0] = 0;
* for (i = 0; i < 351; i++) {
* if (int_key[i])
* hash ^= int_stream[(i + 15):i];
* lo_hash_dword[15:0] ^= Stream[15:0];
* lo_hash_dword[15:0] ^= hi_hash_dword[31:16];
* lo_hash_dword[31:16] ^= hi_hash_dword[15:0];
*
* hi_hash_dword[31:0] ^= Stream[351:320];
*
* if(key[0])
* hash[15:0] ^= Stream[15:0];
*
* for (i = 0; i < 16; i++) {
* if (key[i])
* hash[15:0] ^= lo_hash_dword[(i+15):i];
* if (key[i + 16])
* hash[15:0] ^= hi_hash_dword[(i+15):i];
* }
*
*/
__be32 common_hash_dword = 0;
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 hash_result = 0;
u8 i;
union {
u64 fill[6];
u32 key[11];
u8 key_stream[44];
} tmp_key;
/* record the flow_vm_vlan bits as they are a key part to the hash */
flow_vm_vlan = ntohl(atr_input->dword_stream[0]);
u8 *stream = (u8 *)atr_input;
u8 int_key[44]; /* upper-most bit unused */
u8 hash_str[46]; /* upper-most 2 bits unused */
u16 hash_result = 0;
int i, j, k, h;
/* generate common hash dword */
for (i = 10; i; i -= 2)
common_hash_dword ^= atr_input->dword_stream[i] ^
atr_input->dword_stream[i - 1];
hi_hash_dword = ntohl(common_hash_dword);
/* low dword is word swapped version of common */
lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
/* apply flow ID/VM pool/VLAN ID bits to hash words */
hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
/* Process bits 0 and 16 */
if (key & 0x0001) hash_result ^= lo_hash_dword;
if (key & 0x00010000) hash_result ^= hi_hash_dword;
/*
* Initialize the fill member to prevent warnings
* on some compilers
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
* so we do not add the vlan until after bit 0 was processed
*/
tmp_key.fill[0] = 0;
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
/* First load the temporary key stream */
for (i = 0; i < 6; i++) {
u64 fillkey = ((u64)key << 32) | key;
tmp_key.fill[i] = fillkey;
/* process the remaining 30 bits in the key 2 bits at a time */
for (i = 15; i; i-- ) {
if (key & (0x0001 << i)) hash_result ^= lo_hash_dword >> i;
if (key & (0x00010000 << i)) hash_result ^= hi_hash_dword >> i;
}
/*
* Set the interim key for the hashing. Bit 352 is unused, so we must
* shift and compensate when building the key.
*/
int_key[0] = tmp_key.key_stream[0] >> 1;
for (i = 1, j = 0; i < 44; i++) {
unsigned int this_key = tmp_key.key_stream[j] << 7;
j++;
int_key[i] = (u8)(this_key | (tmp_key.key_stream[j] >> 1));
}
/*
* Set the interim bit string for the hashing. Bits 368 and 367 are
* unused, so shift and compensate when building the string.
*/
hash_str[0] = (stream[40] & 0x7f) >> 1;
for (i = 1, j = 40; i < 46; i++) {
unsigned int this_str = stream[j] << 7;
j++;
if (j > 41)
j = 0;
hash_str[i] = (u8)(this_str | (stream[j] >> 1));
}
/*
* Now compute the hash. i is the index into hash_str, j is into our
* key stream, k is counting the number of bits, and h interates within
* each byte.
*/
for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) {
for (h = 0; h < 8 && k < 351; h++, k++) {
if (int_key[j] & (1 << h)) {
/*
* Key bit is set, XOR in the current 16-bit
* string. Example of processing:
* h = 0,
* tmp = (hash_str[i - 2] & 0 << 16) |
* (hash_str[i - 1] & 0xff << 8) |
* (hash_str[i] & 0xff >> 0)
* So tmp = hash_str[15 + k:k], since the
* i + 2 clause rolls off the 16-bit value
* h = 7,
* tmp = (hash_str[i - 2] & 0x7f << 9) |
* (hash_str[i - 1] & 0xff << 1) |
* (hash_str[i] & 0x80 >> 7)
*/
int tmp = (hash_str[i] >> h);
tmp |= (hash_str[i - 1] << (8 - h));
tmp |= (int)(hash_str[i - 2] & ((1 << h) - 1))
<< (16 - h);
hash_result ^= (u16)tmp;
}
}
}
return hash_result;
return hash_result & IXGBE_ATR_HASH_MASK;
}
/**
* ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream
* @input: input stream to modify
* @vlan: the VLAN id to load
**/
s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan)
{
input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8;
input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff;
return 0;
}
/*
* These defines allow us to quickly generate all of the necessary instructions
* in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
* for values 0 through 15
*/
#define IXGBE_ATR_COMMON_HASH_KEY \
(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
do { \
u32 n = (_n); \
if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
common_hash ^= lo_hash_dword >> n; \
else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
bucket_hash ^= lo_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
sig_hash ^= lo_hash_dword << (16 - n); \
if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
common_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
bucket_hash ^= hi_hash_dword >> n; \
else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
sig_hash ^= hi_hash_dword << (16 - n); \
} while (0);
/**
* ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address
* @input: input stream to modify
* @src_addr: the IP address to load
**/
s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr)
{
input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24;
input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] =
(src_addr >> 16) & 0xff;
input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] =
(src_addr >> 8) & 0xff;
input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff;
return 0;
}
/**
* ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address
* @input: input stream to modify
* @dst_addr: the IP address to load
**/
s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr)
{
input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24;
input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] =
(dst_addr >> 16) & 0xff;
input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] =
(dst_addr >> 8) & 0xff;
input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff;
return 0;
}
/**
* ixgbe_atr_set_src_port_82599 - Sets the source port
* @input: input stream to modify
* @src_port: the source port to load
**/
s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port)
{
input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8;
input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff;
return 0;
}
/**
* ixgbe_atr_set_dst_port_82599 - Sets the destination port
* @input: input stream to modify
* @dst_port: the destination port to load
**/
s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port)
{
input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8;
input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff;
return 0;
}
/**
* ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes
* @input: input stream to modify
* @flex_bytes: the flexible bytes to load
**/
s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte)
{
input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8;
input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff;
return 0;
}
/**
* ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type
* @input: input stream to modify
* @l4type: the layer 4 type value to load
**/
s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type)
{
input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type;
return 0;
}
/**
* ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream
* @input: input stream to search
* @vlan: the VLAN id to load
**/
static s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan)
{
*vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET];
*vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8;
return 0;
}
/**
* ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address
* @input: input stream to search
* @src_addr: the IP address to load
**/
static s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input,
u32 *src_addr)
{
*src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET];
*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8;
*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16;
*src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24;
return 0;
}
/**
* ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address
* @input: input stream to search
* @dst_addr: the IP address to load
**/
static s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input,
u32 *dst_addr)
{
*dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET];
*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8;
*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16;
*dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24;
return 0;
}
/**
* ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address
* @input: input stream to search
* @src_addr_1: the first 4 bytes of the IP address to load
* @src_addr_2: the second 4 bytes of the IP address to load
* @src_addr_3: the third 4 bytes of the IP address to load
* @src_addr_4: the fourth 4 bytes of the IP address to load
**/
static s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input,
u32 *src_addr_1, u32 *src_addr_2,
u32 *src_addr_3, u32 *src_addr_4)
{
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12];
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8;
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16;
*src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24;
*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8];
*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8;
*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16;
*src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24;
*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4];
*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8;
*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16;
*src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24;
*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET];
*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8;
*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16;
*src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24;
return 0;
}
/**
* ixgbe_atr_get_src_port_82599 - Gets the source port
* @input: input stream to modify
* @src_port: the source port to load
* ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
* @stream: input bitstream to compute the hash on
*
* Even though the input is given in big-endian, the FDIRPORT registers
* expect the ports to be programmed in little-endian. Hence the need to swap
* endianness when retrieving the data. This can be confusing since the
* internal hash engine expects it to be big-endian.
* This function is almost identical to the function above but contains
* several optomizations such as unwinding all of the loops, letting the
* compiler work out all of the conditional ifs since the keys are static
* defines, and computing two keys at once since the hashed dword stream
* will be the same for both keys.
**/
static s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input,
u16 *src_port)
static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common)
{
*src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8;
*src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1];
u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
return 0;
}
/* record the flow_vm_vlan bits as they are a key part to the hash */
flow_vm_vlan = ntohl(input.dword);
/**
* ixgbe_atr_get_dst_port_82599 - Gets the destination port
* @input: input stream to modify
* @dst_port: the destination port to load
*
* Even though the input is given in big-endian, the FDIRPORT registers
* expect the ports to be programmed in little-endian. Hence the need to swap
* endianness when retrieving the data. This can be confusing since the
* internal hash engine expects it to be big-endian.
**/
static s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input,
u16 *dst_port)
{
*dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8;
*dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1];
/* generate common hash dword */
hi_hash_dword = ntohl(common.dword);
return 0;
}
/* low dword is word swapped version of common */
lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
/**
* ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes
* @input: input stream to modify
* @flex_bytes: the flexible bytes to load
**/
static s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input,
u16 *flex_byte)
{
*flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET];
*flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8;
/* apply flow ID/VM pool/VLAN ID bits to hash words */
hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
return 0;
}
/* Process bits 0 and 16 */
IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
/**
* ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type
* @input: input stream to modify
* @l4type: the layer 4 type value to load
**/
static s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input,
u8 *l4type)
{
*l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET];
/*
* apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
* delay this because bit 0 of the stream should not be processed
* so we do not add the vlan until after bit 0 was processed
*/
lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
return 0;
/* Process remaining 30 bit of the key */
IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
/* combine common_hash result with signature and bucket hashes */
bucket_hash ^= common_hash;
bucket_hash &= IXGBE_ATR_HASH_MASK;
sig_hash ^= common_hash << 16;
sig_hash &= IXGBE_ATR_HASH_MASK << 16;
/* return completed signature hash */
return sig_hash ^ bucket_hash;
}
/**
* ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
* @hw: pointer to hardware structure
* @stream: input bitstream
* @input: unique input dword
* @common: compressed common input dword
* @queue: queue index to direct traffic to
**/
s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input *input,
union ixgbe_atr_hash_dword input,
union ixgbe_atr_hash_dword common,
u8 queue)
{
u64 fdirhashcmd;
u64 fdircmd;
u32 fdirhash;
u16 bucket_hash, sig_hash;
u8 l4type;
u32 fdircmd;
bucket_hash = ixgbe_atr_compute_hash_82599(input,
IXGBE_ATR_BUCKET_HASH_KEY);
/*
* Get the flow_type in order to program FDIRCMD properly
* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
*/
switch (input.formatted.flow_type) {
case IXGBE_ATR_FLOW_TYPE_TCPV4:
case IXGBE_ATR_FLOW_TYPE_UDPV4:
case IXGBE_ATR_FLOW_TYPE_SCTPV4:
case IXGBE_ATR_FLOW_TYPE_TCPV6:
case IXGBE_ATR_FLOW_TYPE_UDPV6:
case IXGBE_ATR_FLOW_TYPE_SCTPV6:
break;
default:
hw_dbg(hw, " Error on flow type input\n");
return IXGBE_ERR_CONFIG;
}
/* bucket_hash is only 15 bits */
bucket_hash &= IXGBE_ATR_HASH_MASK;
sig_hash = ixgbe_atr_compute_hash_82599(input,
IXGBE_ATR_SIGNATURE_HASH_KEY);
/* Get the l4type in order to program FDIRCMD properly */
/* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */
ixgbe_atr_get_l4type_82599(input, &l4type);
/* configure FDIRCMD register */
fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
/*
* The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
* is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
*/
fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN);
switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
case IXGBE_ATR_L4TYPE_TCP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
break;
case IXGBE_ATR_L4TYPE_UDP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
break;
case IXGBE_ATR_L4TYPE_SCTP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
break;
default:
hw_dbg(hw, "Error on l4type input\n");
return IXGBE_ERR_CONFIG;
}
if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK)
fdircmd |= IXGBE_FDIRCMD_IPV6;
fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT);
fdirhashcmd = ((fdircmd << 32) | fdirhash);
fdirhashcmd = (u64)fdircmd << 32;
fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
return 0;
}
/**
* ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
* @input_mask: mask to be bit swapped
*
* The source and destination port masks for flow director are bit swapped
* in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
* generate a correctly swapped value we need to bit swap the mask and that
* is what is accomplished by this function.
**/
static u32 ixgbe_get_fdirtcpm_82599(struct ixgbe_atr_input_masks *input_masks)
{
u32 mask = ntohs(input_masks->dst_port_mask);
mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
mask |= ntohs(input_masks->src_port_mask);
mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
}
/*
* These two macros are meant to address the fact that we have registers
* that are either all or in part big-endian. As a result on big-endian
* systems we will end up byte swapping the value to little-endian before
* it is byte swapped again and written to the hardware in the original
* big-endian format.
*/
#define IXGBE_STORE_AS_BE32(_value) \
(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
(((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
#define IXGBE_WRITE_REG_BE32(a, reg, value) \
IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
#define IXGBE_STORE_AS_BE16(_value) \
(((u16)(_value) >> 8) | ((u16)(_value) << 8))
/**
* ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter
* @hw: pointer to hardware structure
@ -1687,135 +1522,139 @@ s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
* hardware writes must be protected from one another.
**/
s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw,
struct ixgbe_atr_input *input,
union ixgbe_atr_input *input,
struct ixgbe_atr_input_masks *input_masks,
u16 soft_id, u8 queue)
{
u32 fdircmd = 0;
u32 fdirhash;
u32 src_ipv4 = 0, dst_ipv4 = 0;
u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4;
u16 src_port, dst_port, vlan_id, flex_bytes;
u16 bucket_hash;
u8 l4type;
u8 fdirm = 0;
/* Get our input values */
ixgbe_atr_get_l4type_82599(input, &l4type);
u32 fdircmd;
u32 fdirport, fdirtcpm;
u32 fdirvlan;
/* start with VLAN, flex bytes, VM pool, and IPv6 destination masked */
u32 fdirm = IXGBE_FDIRM_VLANID | IXGBE_FDIRM_VLANP | IXGBE_FDIRM_FLEX |
IXGBE_FDIRM_POOL | IXGBE_FDIRM_DIPv6;
/*
* Check l4type formatting, and bail out before we touch the hardware
* Check flow_type formatting, and bail out before we touch the hardware
* if there's a configuration issue
*/
switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
case IXGBE_ATR_L4TYPE_TCP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP;
break;
case IXGBE_ATR_L4TYPE_UDP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP;
break;
case IXGBE_ATR_L4TYPE_SCTP:
fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP;
switch (input->formatted.flow_type) {
case IXGBE_ATR_FLOW_TYPE_IPV4:
/* use the L4 protocol mask for raw IPv4/IPv6 traffic */
fdirm |= IXGBE_FDIRM_L4P;
case IXGBE_ATR_FLOW_TYPE_SCTPV4:
if (input_masks->dst_port_mask || input_masks->src_port_mask) {
hw_dbg(hw, " Error on src/dst port mask\n");
return IXGBE_ERR_CONFIG;
}
case IXGBE_ATR_FLOW_TYPE_TCPV4:
case IXGBE_ATR_FLOW_TYPE_UDPV4:
break;
default:
hw_dbg(hw, "Error on l4type input\n");
hw_dbg(hw, " Error on flow type input\n");
return IXGBE_ERR_CONFIG;
}
bucket_hash = ixgbe_atr_compute_hash_82599(input,
IXGBE_ATR_BUCKET_HASH_KEY);
/* bucket_hash is only 15 bits */
bucket_hash &= IXGBE_ATR_HASH_MASK;
ixgbe_atr_get_vlan_id_82599(input, &vlan_id);
ixgbe_atr_get_src_port_82599(input, &src_port);
ixgbe_atr_get_dst_port_82599(input, &dst_port);
ixgbe_atr_get_flex_byte_82599(input, &flex_bytes);
fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash;
/* Now figure out if we're IPv4 or IPv6 */
if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) {
/* IPv6 */
ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2,
&src_ipv6_3, &src_ipv6_4);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2);
IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3);
/* The last 4 bytes is the same register as IPv4 */
IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4);
fdircmd |= IXGBE_FDIRCMD_IPV6;
fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH;
} else {
/* IPv4 */
ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4);
IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4);
}
ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4);
IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4);
IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id |
(flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT)));
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port |
(dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT)));
/*
* Program the relevant mask registers. L4type cannot be
* masked out in this implementation.
* Program the relevant mask registers. If src/dst_port or src/dst_addr
* are zero, then assume a full mask for that field. Also assume that
* a VLAN of 0 is unspecified, so mask that out as well. L4type
* cannot be masked out in this implementation.
*
* This also assumes IPv4 only. IPv6 masking isn't supported at this
* point in time.
*/
IXGBE_WRITE_REG(hw, IXGBE_FDIRSIP4M, input_masks->src_ip_mask);
IXGBE_WRITE_REG(hw, IXGBE_FDIRDIP4M, input_masks->dst_ip_mask);
switch (l4type & IXGBE_ATR_L4TYPE_MASK) {
case IXGBE_ATR_L4TYPE_TCP:
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, input_masks->src_port_mask);
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM,
(IXGBE_READ_REG(hw, IXGBE_FDIRTCPM) |
(input_masks->dst_port_mask << 16)));
/* Program FDIRM */
switch (ntohs(input_masks->vlan_id_mask) & 0xEFFF) {
case 0xEFFF:
/* Unmask VLAN ID - bit 0 and fall through to unmask prio */
fdirm &= ~IXGBE_FDIRM_VLANID;
case 0xE000:
/* Unmask VLAN prio - bit 1 */
fdirm &= ~IXGBE_FDIRM_VLANP;
break;
case IXGBE_ATR_L4TYPE_UDP:
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, input_masks->src_port_mask);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM,
(IXGBE_READ_REG(hw, IXGBE_FDIRUDPM) |
(input_masks->src_port_mask << 16)));
case 0x0FFF:
/* Unmask VLAN ID - bit 0 */
fdirm &= ~IXGBE_FDIRM_VLANID;
break;
case 0x0000:
/* do nothing, vlans already masked */
break;
default:
/* this already would have failed above */
break;
hw_dbg(hw, " Error on VLAN mask\n");
return IXGBE_ERR_CONFIG;
}
/* Program the last mask register, FDIRM */
if (input_masks->vlan_id_mask)
/* Mask both VLAN and VLANP - bits 0 and 1 */
fdirm |= 0x3;
if (input_masks->data_mask)
/* Flex bytes need masking, so mask the whole thing - bit 4 */
fdirm |= 0x10;
if (input_masks->flex_mask & 0xFFFF) {
if ((input_masks->flex_mask & 0xFFFF) != 0xFFFF) {
hw_dbg(hw, " Error on flexible byte mask\n");
return IXGBE_ERR_CONFIG;
}
/* Unmask Flex Bytes - bit 4 */
fdirm &= ~IXGBE_FDIRM_FLEX;
}
/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
fdirm |= 0x24;
IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW;
fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE;
fdircmd |= IXGBE_FDIRCMD_LAST;
fdircmd |= IXGBE_FDIRCMD_QUEUE_EN;
fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
/* store the TCP/UDP port masks, bit reversed from port layout */
fdirtcpm = ixgbe_get_fdirtcpm_82599(input_masks);
/* write both the same so that UDP and TCP use the same mask */
IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
/* store source and destination IP masks (big-enian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
~input_masks->src_ip_mask[0]);
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
~input_masks->dst_ip_mask[0]);
/* Apply masks to input data */
input->formatted.vlan_id &= input_masks->vlan_id_mask;
input->formatted.flex_bytes &= input_masks->flex_mask;
input->formatted.src_port &= input_masks->src_port_mask;
input->formatted.dst_port &= input_masks->dst_port_mask;
input->formatted.src_ip[0] &= input_masks->src_ip_mask[0];
input->formatted.dst_ip[0] &= input_masks->dst_ip_mask[0];
/* record vlan (little-endian) and flex_bytes(big-endian) */
fdirvlan =
IXGBE_STORE_AS_BE16(ntohs(input->formatted.flex_bytes));
fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
fdirvlan |= ntohs(input->formatted.vlan_id);
IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
/* record source and destination port (little-endian)*/
fdirport = ntohs(input->formatted.dst_port);
fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
fdirport |= ntohs(input->formatted.src_port);
IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
/* record the first 32 bits of the destination address (big-endian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
/* record the source address (big-endian) */
IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
/* configure FDIRCMD register */
fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
/* we only want the bucket hash so drop the upper 16 bits */
fdirhash = ixgbe_atr_compute_hash_82599(input,
IXGBE_ATR_BUCKET_HASH_KEY);
fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
return 0;
}
/**
* ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
* @hw: pointer to hardware structure

138
drivers/net/ixgbe/ixgbe_ethtool.c
View File

@ -1477,9 +1477,7 @@ static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
reg_ctl &= ~IXGBE_RXCTRL_RXEN;
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(rx_ring->reg_idx));
reg_ctl &= ~IXGBE_RXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(rx_ring->reg_idx), reg_ctl);
ixgbe_disable_rx_queue(adapter, rx_ring);
/* now Tx */
reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx));
@ -2279,10 +2277,11 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
struct ethtool_rx_ntuple *cmd)
{
struct ixgbe_adapter *adapter = netdev_priv(dev);
struct ethtool_rx_ntuple_flow_spec fs = cmd->fs;
struct ixgbe_atr_input input_struct;
struct ethtool_rx_ntuple_flow_spec *fs = &cmd->fs;
union ixgbe_atr_input input_struct;
struct ixgbe_atr_input_masks input_masks;
int target_queue;
int err;
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
return -EOPNOTSUPP;
@ -2291,67 +2290,122 @@ static int ixgbe_set_rx_ntuple(struct net_device *dev,
* Don't allow programming if the action is a queue greater than
* the number of online Tx queues.
*/
if ((fs.action >= adapter->num_tx_queues) ||
(fs.action < ETHTOOL_RXNTUPLE_ACTION_DROP))
if ((fs->action >= adapter->num_tx_queues) ||
(fs->action < ETHTOOL_RXNTUPLE_ACTION_DROP))
return -EINVAL;
memset(&input_struct, 0, sizeof(struct ixgbe_atr_input));
memset(&input_struct, 0, sizeof(union ixgbe_atr_input));
memset(&input_masks, 0, sizeof(struct ixgbe_atr_input_masks));
input_masks.src_ip_mask = fs.m_u.tcp_ip4_spec.ip4src;
input_masks.dst_ip_mask = fs.m_u.tcp_ip4_spec.ip4dst;
input_masks.src_port_mask = fs.m_u.tcp_ip4_spec.psrc;
input_masks.dst_port_mask = fs.m_u.tcp_ip4_spec.pdst;
input_masks.vlan_id_mask = fs.vlan_tag_mask;
/* only use the lowest 2 bytes for flex bytes */
input_masks.data_mask = (fs.data_mask & 0xffff);
switch (fs.flow_type) {
/* record flow type */
switch (fs->flow_type) {
case IPV4_FLOW:
input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
break;
case TCP_V4_FLOW:
ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_TCP);
input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
break;
case UDP_V4_FLOW:
ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_UDP);
input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
break;
case SCTP_V4_FLOW:
ixgbe_atr_set_l4type_82599(&input_struct, IXGBE_ATR_L4TYPE_SCTP);
input_struct.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
break;
default:
return -1;
}
/* Mask bits from the inputs based on user-supplied mask */
ixgbe_atr_set_src_ipv4_82599(&input_struct,
(fs.h_u.tcp_ip4_spec.ip4src & ~fs.m_u.tcp_ip4_spec.ip4src));
ixgbe_atr_set_dst_ipv4_82599(&input_struct,
(fs.h_u.tcp_ip4_spec.ip4dst & ~fs.m_u.tcp_ip4_spec.ip4dst));
/* 82599 expects these to be byte-swapped for perfect filtering */
ixgbe_atr_set_src_port_82599(&input_struct,
((ntohs(fs.h_u.tcp_ip4_spec.psrc)) & ~fs.m_u.tcp_ip4_spec.psrc));
ixgbe_atr_set_dst_port_82599(&input_struct,
((ntohs(fs.h_u.tcp_ip4_spec.pdst)) & ~fs.m_u.tcp_ip4_spec.pdst));
/* copy vlan tag minus the CFI bit */
if ((fs->vlan_tag & 0xEFFF) || (~fs->vlan_tag_mask & 0xEFFF)) {
input_struct.formatted.vlan_id = htons(fs->vlan_tag & 0xEFFF);
if (!fs->vlan_tag_mask) {
input_masks.vlan_id_mask = htons(0xEFFF);
} else {
switch (~fs->vlan_tag_mask & 0xEFFF) {
/* all of these are valid vlan-mask values */
case 0xEFFF:
case 0xE000:
case 0x0FFF:
case 0x0000:
input_masks.vlan_id_mask =
htons(~fs->vlan_tag_mask);
break;
/* exit with error if vlan-mask is invalid */
default:
e_err(drv, "Partial VLAN ID or "
"priority mask in vlan-mask is not "
"supported by hardware\n");
return -1;
}
}
}
/* VLAN and Flex bytes are either completely masked or not */
if (!fs.vlan_tag_mask)
ixgbe_atr_set_vlan_id_82599(&input_struct, fs.vlan_tag);
/* make sure we only use the first 2 bytes of user data */
if ((fs->data & 0xFFFF) || (~fs->data_mask & 0xFFFF)) {
input_struct.formatted.flex_bytes = htons(fs->data & 0xFFFF);
if (!(fs->data_mask & 0xFFFF)) {
input_masks.flex_mask = 0xFFFF;
} else if (~fs->data_mask & 0xFFFF) {
e_err(drv, "Partial user-def-mask is not "
"supported by hardware\n");
return -1;
}
}
if (!input_masks.data_mask)
/* make sure we only use the first 2 bytes of user data */
ixgbe_atr_set_flex_byte_82599(&input_struct,
(fs.data & 0xffff));
/*
* Copy input into formatted structures
*
* These assignments are based on the following logic
* If neither input or mask are set assume value is masked out.
* If input is set, but mask is not mask should default to accept all.
* If input is not set, but mask is set then mask likely results in 0.
* If input is set and mask is set then assign both.
*/
if (fs->h_u.tcp_ip4_spec.ip4src || ~fs->m_u.tcp_ip4_spec.ip4src) {
input_struct.formatted.src_ip[0] = fs->h_u.tcp_ip4_spec.ip4src;
if (!fs->m_u.tcp_ip4_spec.ip4src)
input_masks.src_ip_mask[0] = 0xFFFFFFFF;
else
input_masks.src_ip_mask[0] =
~fs->m_u.tcp_ip4_spec.ip4src;
}
if (fs->h_u.tcp_ip4_spec.ip4dst || ~fs->m_u.tcp_ip4_spec.ip4dst) {
input_struct.formatted.dst_ip[0] = fs->h_u.tcp_ip4_spec.ip4dst;
if (!fs->m_u.tcp_ip4_spec.ip4dst)
input_masks.dst_ip_mask[0] = 0xFFFFFFFF;
else
input_masks.dst_ip_mask[0] =
~fs->m_u.tcp_ip4_spec.ip4dst;
}
if (fs->h_u.tcp_ip4_spec.psrc || ~fs->m_u.tcp_ip4_spec.psrc) {
input_struct.formatted.src_port = fs->h_u.tcp_ip4_spec.psrc;
if (!fs->m_u.tcp_ip4_spec.psrc)
input_masks.src_port_mask = 0xFFFF;
else
input_masks.src_port_mask = ~fs->m_u.tcp_ip4_spec.psrc;
}
if (fs->h_u.tcp_ip4_spec.pdst || ~fs->m_u.tcp_ip4_spec.pdst) {
input_struct.formatted.dst_port = fs->h_u.tcp_ip4_spec.pdst;
if (!fs->m_u.tcp_ip4_spec.pdst)
input_masks.dst_port_mask = 0xFFFF;
else
input_masks.dst_port_mask = ~fs->m_u.tcp_ip4_spec.pdst;
}
/* determine if we need to drop or route the packet */
if (fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
if (fs->action == ETHTOOL_RXNTUPLE_ACTION_DROP)
target_queue = MAX_RX_QUEUES - 1;
else
target_queue = fs.action;
target_queue = fs->action;
spin_lock(&adapter->fdir_perfect_lock);
ixgbe_fdir_add_perfect_filter_82599(&adapter->hw, &input_struct,
&input_masks, 0, target_queue);
err = ixgbe_fdir_add_perfect_filter_82599(&adapter->hw,
&input_struct,
&input_masks, 0,
target_queue);
spin_unlock(&adapter->fdir_perfect_lock);
return 0;
return err ? -1 : 0;
}
static const struct ethtool_ops ixgbe_ethtool_ops = {

169
drivers/net/ixgbe/ixgbe_main.c
View File

@ -3024,6 +3024,36 @@ static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
}
}
void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring)
{
struct ixgbe_hw *hw = &adapter->hw;
int wait_loop = IXGBE_MAX_RX_DESC_POLL;
u32 rxdctl;
u8 reg_idx = ring->reg_idx;
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
rxdctl &= ~IXGBE_RXDCTL_ENABLE;
/* write value back with RXDCTL.ENABLE bit cleared */
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
if (hw->mac.type == ixgbe_mac_82598EB &&
!(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
return;
/* the hardware may take up to 100us to really disable the rx queue */
do {
udelay(10);
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
} while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE));
if (!wait_loop) {
e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
"the polling period\n", reg_idx);
}
}
void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
struct ixgbe_ring *ring)
{
@ -3034,9 +3064,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
/* disable queue to avoid issues while updating state */
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx),
rxdctl & ~IXGBE_RXDCTL_ENABLE);
IXGBE_WRITE_FLUSH(hw);
ixgbe_disable_rx_queue(adapter, ring);
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
@ -4064,7 +4092,11 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
IXGBE_WRITE_FLUSH(hw);
/* disable all enabled rx queues */
for (i = 0; i < adapter->num_rx_queues; i++)
/* this call also flushes the previous write */
ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
msleep(10);
netif_tx_stop_all_queues(netdev);
@ -4789,6 +4821,12 @@ static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
if (adapter->flags & (IXGBE_FLAG_FDIR_HASH_CAPABLE |
IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
e_err(probe,
"Flow Director is not supported while multiple "
"queues are disabled. Disabling Flow Director\n");
}
adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
adapter->atr_sample_rate = 0;
@ -5094,16 +5132,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
if (dev->features & NETIF_F_NTUPLE) {
/* Flow Director perfect filter enabled */
adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
adapter->atr_sample_rate = 0;
spin_lock_init(&adapter->fdir_perfect_lock);
} else {
/* Flow Director hash filters enabled */
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->atr_sample_rate = 20;
}
/* n-tuple support exists, always init our spinlock */
spin_lock_init(&adapter->fdir_perfect_lock);
/* Flow Director hash filters enabled */
adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
adapter->atr_sample_rate = 20;
adapter->ring_feature[RING_F_FDIR].indices =
IXGBE_MAX_FDIR_INDICES;
adapter->fdir_pballoc = 0;
@ -6474,38 +6507,92 @@ static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
writel(i, tx_ring->tail);
}
static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
u8 queue, u32 tx_flags, __be16 protocol)
static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
u32 tx_flags, __be16 protocol)
{
struct ixgbe_atr_input atr_input;
struct iphdr *iph = ip_hdr(skb);
struct ethhdr *eth = (struct ethhdr *)skb->data;
struct ixgbe_q_vector *q_vector = ring->q_vector;
union ixgbe_atr_hash_dword input = { .dword = 0 };
union ixgbe_atr_hash_dword common = { .dword = 0 };
union {
unsigned char *network;
struct iphdr *ipv4;
struct ipv6hdr *ipv6;
} hdr;
struct tcphdr *th;
u16 vlan_id;
__be16 vlan_id;
/* Right now, we support IPv4 w/ TCP only */
if (protocol != htons(ETH_P_IP) ||
iph->protocol != IPPROTO_TCP)
/* if ring doesn't have a interrupt vector, cannot perform ATR */
if (!q_vector)
return;
memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
/* do nothing if sampling is disabled */
if (!ring->atr_sample_rate)
return;
vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
IXGBE_TX_FLAGS_VLAN_SHIFT;
ring->atr_count++;
/* snag network header to get L4 type and address */
hdr.network = skb_network_header(skb);
/* Currently only IPv4/IPv6 with TCP is supported */
if ((protocol != __constant_htons(ETH_P_IPV6) ||
hdr.ipv6->nexthdr != IPPROTO_TCP) &&
(protocol != __constant_htons(ETH_P_IP) ||
hdr.ipv4->protocol != IPPROTO_TCP))
return;
th = tcp_hdr(skb);
ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
ixgbe_atr_set_src_port_82599(&atr_input, th->dest);
ixgbe_atr_set_dst_port_82599(&atr_input, th->source);
ixgbe_atr_set_flex_byte_82599(&atr_input, eth->h_proto);
ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_L4TYPE_TCP);
/* src and dst are inverted, think how the receiver sees them */
ixgbe_atr_set_src_ipv4_82599(&atr_input, iph->daddr);
ixgbe_atr_set_dst_ipv4_82599(&atr_input, iph->saddr);
/* skip this packet since the socket is closing */
if (th->fin)
return;
/* sample on all syn packets or once every atr sample count */
if (!th->syn && (ring->atr_count < ring->atr_sample_rate))
return;
/* reset sample count */
ring->atr_count = 0;
vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
/*
* src and dst are inverted, think how the receiver sees them
*
* The input is broken into two sections, a non-compressed section
* containing vm_pool, vlan_id, and flow_type. The rest of the data
* is XORed together and stored in the compressed dword.
*/
input.formatted.vlan_id = vlan_id;
/*
* since src port and flex bytes occupy the same word XOR them together
* and write the value to source port portion of compressed dword
*/
if (vlan_id)
common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
else
common.port.src ^= th->dest ^ protocol;
common.port.dst ^= th->source;
if (protocol == __constant_htons(ETH_P_IP)) {
input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
} else {
input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6;
common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^
hdr.ipv6->saddr.s6_addr32[1] ^
hdr.ipv6->saddr.s6_addr32[2] ^
hdr.ipv6->saddr.s6_addr32[3] ^
hdr.ipv6->daddr.s6_addr32[0] ^
hdr.ipv6->daddr.s6_addr32[1] ^
hdr.ipv6->daddr.s6_addr32[2] ^
hdr.ipv6->daddr.s6_addr32[3];
}
/* This assumes the Rx queue and Tx queue are bound to the same CPU */
ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
input, common, ring->queue_index);
}
static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, int size)
@ -6676,16 +6763,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
if (count) {
/* add the ATR filter if ATR is on */
if (tx_ring->atr_sample_rate) {
++tx_ring->atr_count;
if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
test_bit(__IXGBE_TX_FDIR_INIT_DONE,
&tx_ring->state)) {
ixgbe_atr(adapter, skb, tx_ring->queue_index,
tx_flags, protocol);
tx_ring->atr_count = 0;
}
}
if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
ixgbe_atr(tx_ring, skb, tx_flags, protocol);
txq = netdev_get_tx_queue(netdev, tx_ring->queue_index);
txq->tx_bytes += skb->len;
txq->tx_packets++;

91
drivers/net/ixgbe/ixgbe_type.h
View File

@ -1947,10 +1947,9 @@ enum ixgbe_fdir_pballoc_type {
#define IXGBE_FDIRM_VLANID 0x00000001
#define IXGBE_FDIRM_VLANP 0x00000002
#define IXGBE_FDIRM_POOL 0x00000004
#define IXGBE_FDIRM_L3P 0x00000008
#define IXGBE_FDIRM_L4P 0x00000010
#define IXGBE_FDIRM_FLEX 0x00000020
#define IXGBE_FDIRM_DIPv6 0x00000040
#define IXGBE_FDIRM_L4P 0x00000008
#define IXGBE_FDIRM_FLEX 0x00000010
#define IXGBE_FDIRM_DIPv6 0x00000020
#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF
#define IXGBE_FDIRFREE_FREE_SHIFT 0
@ -1990,6 +1989,7 @@ enum ixgbe_fdir_pballoc_type {
#define IXGBE_FDIRCMD_LAST 0x00000800
#define IXGBE_FDIRCMD_COLLISION 0x00001000
#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000
#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5
#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16
#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24
#define IXGBE_FDIR_INIT_DONE_POLL 10
@ -2147,51 +2147,80 @@ typedef u32 ixgbe_physical_layer;
#define FC_LOW_WATER(MTU) (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
/* Software ATR hash keys */
#define IXGBE_ATR_BUCKET_HASH_KEY 0xE214AD3D
#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17
/* Software ATR input stream offsets and masks */
#define IXGBE_ATR_VLAN_OFFSET 0
#define IXGBE_ATR_SRC_IPV6_OFFSET 2
#define IXGBE_ATR_SRC_IPV4_OFFSET 14
#define IXGBE_ATR_DST_IPV6_OFFSET 18
#define IXGBE_ATR_DST_IPV4_OFFSET 30
#define IXGBE_ATR_SRC_PORT_OFFSET 34
#define IXGBE_ATR_DST_PORT_OFFSET 36
#define IXGBE_ATR_FLEX_BYTE_OFFSET 38
#define IXGBE_ATR_VM_POOL_OFFSET 40
#define IXGBE_ATR_L4TYPE_OFFSET 41
#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
/* Software ATR input stream values and masks */
#define IXGBE_ATR_HASH_MASK 0x7fff
#define IXGBE_ATR_L4TYPE_MASK 0x3
#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
#define IXGBE_ATR_L4TYPE_UDP 0x1
#define IXGBE_ATR_L4TYPE_TCP 0x2
#define IXGBE_ATR_L4TYPE_SCTP 0x3
#define IXGBE_ATR_HASH_MASK 0x7fff
#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
enum ixgbe_atr_flow_type {
IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0,
IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1,
IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2,
IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4,
IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5,
IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6,
IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
};
/* Flow Director ATR input struct. */
struct ixgbe_atr_input {
/* Byte layout in order, all values with MSB first:
union ixgbe_atr_input {
/*
* Byte layout in order, all values with MSB first:
*
* vm_pool - 1 byte
* flow_type - 1 byte
* vlan_id - 2 bytes
* src_ip - 16 bytes
* dst_ip - 16 bytes
* src_port - 2 bytes
* dst_port - 2 bytes
* flex_bytes - 2 bytes
* vm_pool - 1 byte
* l4type - 1 byte
* rsvd0 - 2 bytes - space reserved must be 0.
*/
u8 byte_stream[42];
struct {
u8 vm_pool;
u8 flow_type;
__be16 vlan_id;
__be32 dst_ip[4];
__be32 src_ip[4];
__be16 src_port;
__be16 dst_port;
__be16 flex_bytes;
__be16 rsvd0;
} formatted;
__be32 dword_stream[11];
};
/* Flow Director compressed ATR hash input struct */
union ixgbe_atr_hash_dword {
struct {
u8 vm_pool;
u8 flow_type;
__be16 vlan_id;
} formatted;
__be32 ip;
struct {
__be16 src;
__be16 dst;
} port;
__be16 flex_bytes;
__be32 dword;
};
struct ixgbe_atr_input_masks {
u32 src_ip_mask;
u32 dst_ip_mask;
u16 src_port_mask;
u16 dst_port_mask;
u16 vlan_id_mask;
u16 data_mask;
__be16 rsvd0;
__be16 vlan_id_mask;
__be32 dst_ip_mask[4];
__be32 src_ip_mask[4];
__be16 src_port_mask;
__be16 dst_port_mask;
__be16 flex_mask;
};
enum ixgbe_eeprom_type {

3
drivers/net/mlx4/en_netdev.c
View File

@ -972,7 +972,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
int i;
int err;
dev = alloc_etherdev_mq(sizeof(struct mlx4_en_priv), prof->tx_ring_num);
dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv),
prof->tx_ring_num, prof->rx_ring_num);
if (dev == NULL) {
mlx4_err(mdev, "Net device allocation failed\n");
return -ENOMEM;

1
drivers/net/pcmcia/pcnet_cs.c
View File

@ -1536,6 +1536,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
PCMCIA_DEVICE_PROD_ID12("corega", "Ether CF-TD", 0x0a21501a, 0x6589340a),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether CF-TD LAN Card", 0x5261440f, 0x8797663b),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),

10
drivers/net/ppp_async.c
View File

@ -32,6 +32,7 @@
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h>
#include <asm/string.h>
@ -542,7 +543,7 @@ ppp_async_encode(struct asyncppp *ap)
data = ap->tpkt->data;
count = ap->tpkt->len;
fcs = ap->tfcs;
proto = (data[0] << 8) + data[1];
proto = get_unaligned_be16(data);
/*
* LCP packets with code values between 1 (configure-reqest)
@ -963,7 +964,7 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
code = data[0];
if (code != CONFACK && code != CONFREQ)
return;
dlen = (data[2] << 8) + data[3];
dlen = get_unaligned_be16(data + 2);
if (len < dlen)
return; /* packet got truncated or length is bogus */
@ -997,15 +998,14 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data,
while (dlen >= 2 && dlen >= data[1] && data[1] >= 2) {
switch (data[0]) {
case LCP_MRU:
val = (data[2] << 8) + data[3];
val = get_unaligned_be16(data + 2);
if (inbound)
ap->mru = val;
else
ap->chan.mtu = val;
break;
case LCP_ASYNCMAP:
val = (data[2] << 24) + (data[3] << 16)
+ (data[4] << 8) + data[5];
val = get_unaligned_be32(data + 2);
if (inbound)
ap->raccm = val;
else

9
drivers/net/ppp_deflate.c
View File

@ -41,6 +41,7 @@
#include <linux/ppp-comp.h>
#include <linux/zlib.h>
#include <asm/unaligned.h>
/*
* State for a Deflate (de)compressor.
@ -232,11 +233,9 @@ static int z_compress(void *arg, unsigned char *rptr, unsigned char *obuf,
*/
wptr[0] = PPP_ADDRESS(rptr);
wptr[1] = PPP_CONTROL(rptr);
wptr[2] = PPP_COMP >> 8;
wptr[3] = PPP_COMP;
put_unaligned_be16(PPP_COMP, wptr + 2);
wptr += PPP_HDRLEN;
wptr[0] = state->seqno >> 8;
wptr[1] = state->seqno;
put_unaligned_be16(state->seqno, wptr);
wptr += DEFLATE_OVHD;
olen = PPP_HDRLEN + DEFLATE_OVHD;
state->strm.next_out = wptr;
@ -451,7 +450,7 @@ static int z_decompress(void *arg, unsigned char *ibuf, int isize,
}
/* Check the sequence number. */
seq = (ibuf[PPP_HDRLEN] << 8) + ibuf[PPP_HDRLEN+1];
seq = get_unaligned_be16(ibuf + PPP_HDRLEN);
if (seq != (state->seqno & 0xffff)) {
if (state->debug)
printk(KERN_DEBUG "z_decompress%d: bad seq # %d, expected %d\n",

9
drivers/net/ppp_generic.c
View File

@ -46,6 +46,7 @@
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <net/slhc_vj.h>
#include <asm/atomic.h>
@ -210,7 +211,7 @@ struct ppp_net {
};
/* Get the PPP protocol number from a skb */
#define PPP_PROTO(skb) (((skb)->data[0] << 8) + (skb)->data[1])
#define PPP_PROTO(skb) get_unaligned_be16((skb)->data)
/* We limit the length of ppp->file.rq to this (arbitrary) value */
#define PPP_MAX_RQLEN 32
@ -964,8 +965,7 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev)
pp = skb_push(skb, 2);
proto = npindex_to_proto[npi];
pp[0] = proto >> 8;
pp[1] = proto;
put_unaligned_be16(proto, pp);
netif_stop_queue(dev);
skb_queue_tail(&ppp->file.xq, skb);
@ -1473,8 +1473,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
q = skb_put(frag, flen + hdrlen);
/* make the MP header */
q[0] = PPP_MP >> 8;
q[1] = PPP_MP;
put_unaligned_be16(PPP_MP, q);
if (ppp->flags & SC_MP_XSHORTSEQ) {
q[2] = bits + ((ppp->nxseq >> 8) & 0xf);
q[3] = ppp->nxseq;

7
drivers/net/ppp_mppe.c
View File

@ -55,6 +55,7 @@
#include <linux/ppp_defs.h>
#include <linux/ppp-comp.h>
#include <linux/scatterlist.h>
#include <asm/unaligned.h>
#include "ppp_mppe.h"
@ -395,16 +396,14 @@ mppe_compress(void *arg, unsigned char *ibuf, unsigned char *obuf,
*/
obuf[0] = PPP_ADDRESS(ibuf);
obuf[1] = PPP_CONTROL(ibuf);
obuf[2] = PPP_COMP >> 8; /* isize + MPPE_OVHD + 1 */
obuf[3] = PPP_COMP; /* isize + MPPE_OVHD + 2 */
put_unaligned_be16(PPP_COMP, obuf + 2);
obuf += PPP_HDRLEN;
state->ccount = (state->ccount + 1) % MPPE_CCOUNT_SPACE;
if (state->debug >= 7)
printk(KERN_DEBUG "mppe_compress[%d]: ccount %d\n", state->unit,
state->ccount);
obuf[0] = state->ccount >> 8;
obuf[1] = state->ccount & 0xff;
put_unaligned_be16(state->ccount, obuf);
if (!state->stateful || /* stateless mode */
((state->ccount & 0xff) == 0xff) || /* "flag" packet */

3
drivers/net/ppp_synctty.c
View File

@ -45,6 +45,7 @@
#include <linux/completion.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h>
#define PPP_VERSION "2.4.2"
@ -563,7 +564,7 @@ ppp_sync_txmunge(struct syncppp *ap, struct sk_buff *skb)
int islcp;
data = skb->data;
proto = (data[0] << 8) + data[1];
proto = get_unaligned_be16(data);
/* LCP packets with codes between 1 (configure-request)
* and 7 (code-reject) must be sent as though no options

24
drivers/net/qlcnic/qlcnic.h
View File

@ -34,8 +34,8 @@
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
#define _QLCNIC_LINUX_SUBVERSION 14
#define QLCNIC_LINUX_VERSIONID "5.0.14"
#define _QLCNIC_LINUX_SUBVERSION 15
#define QLCNIC_LINUX_VERSIONID "5.0.15"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@ -289,6 +289,26 @@ struct uni_data_desc{
u32 reserved[5];
};
/* Flash Defines and Structures */
#define QLCNIC_FLT_LOCATION 0x3F1000
#define QLCNIC_FW_IMAGE_REGION 0x74
struct qlcnic_flt_header {
u16 version;
u16 len;
u16 checksum;
u16 reserved;
};
struct qlcnic_flt_entry {
u8 region;
u8 reserved0;
u8 attrib;
u8 reserved1;
u32 size;
u32 start_addr;
u32 end_add;
};
/* Magic number to let user know flash is programmed */
#define QLCNIC_BDINFO_MAGIC 0x12345678

2
drivers/net/qlcnic/qlcnic_ethtool.c
View File

@ -672,7 +672,7 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
if (data[1])
eth_test->flags |= ETH_TEST_FL_FAILED;
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
if (eth_test->flags & ETH_TEST_FL_OFFLINE) {
data[2] = qlcnic_irq_test(dev);
if (data[2])
eth_test->flags |= ETH_TEST_FL_FAILED;

63
drivers/net/qlcnic/qlcnic_init.c
View File

@ -627,12 +627,73 @@ qlcnic_setup_idc_param(struct qlcnic_adapter *adapter) {
return 0;
}
static int qlcnic_get_flt_entry(struct qlcnic_adapter *adapter, u8 region,
struct qlcnic_flt_entry *region_entry)
{
struct qlcnic_flt_header flt_hdr;
struct qlcnic_flt_entry *flt_entry;
int i = 0, ret;
u32 entry_size;
memset(region_entry, 0, sizeof(struct qlcnic_flt_entry));
ret = qlcnic_rom_fast_read_words(adapter, QLCNIC_FLT_LOCATION,
(u8 *)&flt_hdr,
sizeof(struct qlcnic_flt_header));
if (ret) {
dev_warn(&adapter->pdev->dev,
"error reading flash layout header\n");
return -EIO;
}
entry_size = flt_hdr.len - sizeof(struct qlcnic_flt_header);
flt_entry = (struct qlcnic_flt_entry *)vzalloc(entry_size);
if (flt_entry == NULL) {
dev_warn(&adapter->pdev->dev, "error allocating memory\n");
return -EIO;
}
ret = qlcnic_rom_fast_read_words(adapter, QLCNIC_FLT_LOCATION +
sizeof(struct qlcnic_flt_header),
(u8 *)flt_entry, entry_size);
if (ret) {
dev_warn(&adapter->pdev->dev,
"error reading flash layout entries\n");
goto err_out;
}
while (i < (entry_size/sizeof(struct qlcnic_flt_entry))) {
if (flt_entry[i].region == region)
break;
i++;
}
if (i >= (entry_size/sizeof(struct qlcnic_flt_entry))) {
dev_warn(&adapter->pdev->dev,
"region=%x not found in %d regions\n", region, i);
ret = -EIO;
goto err_out;
}
memcpy(region_entry, &flt_entry[i], sizeof(struct qlcnic_flt_entry));
err_out:
vfree(flt_entry);
return ret;
}
int
qlcnic_check_flash_fw_ver(struct qlcnic_adapter *adapter)
{
struct qlcnic_flt_entry fw_entry;
u32 ver = -1, min_ver;
int ret;
qlcnic_rom_fast_read(adapter, QLCNIC_FW_VERSION_OFFSET, (int *)&ver);
ret = qlcnic_get_flt_entry(adapter, QLCNIC_FW_IMAGE_REGION, &fw_entry);
if (!ret)
/* 0-4:-signature, 4-8:-fw version */
qlcnic_rom_fast_read(adapter, fw_entry.start_addr + 4,
(int *)&ver);
else
qlcnic_rom_fast_read(adapter, QLCNIC_FW_VERSION_OFFSET,
(int *)&ver);
ver = QLCNIC_DECODE_VERSION(ver);
min_ver = QLCNIC_MIN_FW_VERSION;

10
drivers/net/qlcnic/qlcnic_main.c
View File

@ -31,15 +31,15 @@ static const char qlcnic_driver_string[] = "QLogic 1/10 GbE "
static struct workqueue_struct *qlcnic_wq;
static int qlcnic_mac_learn;
module_param(qlcnic_mac_learn, int, 0644);
module_param(qlcnic_mac_learn, int, 0444);
MODULE_PARM_DESC(qlcnic_mac_learn, "Mac Filter (0=disabled, 1=enabled)");
static int use_msi = 1;
module_param(use_msi, int, 0644);
module_param(use_msi, int, 0444);
MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
static int use_msi_x = 1;
module_param(use_msi_x, int, 0644);
module_param(use_msi_x, int, 0444);
MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
static int auto_fw_reset = AUTO_FW_RESET_ENABLED;
@ -47,11 +47,11 @@ module_param(auto_fw_reset, int, 0644);
MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
static int load_fw_file;
module_param(load_fw_file, int, 0644);
module_param(load_fw_file, int, 0444);
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
static int qlcnic_config_npars;
module_param(qlcnic_config_npars, int, 0644);
module_param(qlcnic_config_npars, int, 0444);
MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
static int __devinit qlcnic_probe(struct pci_dev *pdev,

145
drivers/net/r8169.c
View File

@ -1632,36 +1632,134 @@ rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
{
__le32 *phytable = (__le32 *)fw->data;
struct net_device *dev = tp->dev;
size_t i;
size_t index, fw_size = fw->size / sizeof(*phytable);
u32 predata, count;
if (fw->size % sizeof(*phytable)) {
netif_err(tp, probe, dev, "odd sized firmware %zd\n", fw->size);
return;
}
for (i = 0; i < fw->size / sizeof(*phytable); i++) {
u32 action = le32_to_cpu(phytable[i]);
for (index = 0; index < fw_size; index++) {
u32 action = le32_to_cpu(phytable[index]);
u32 regno = (action & 0x0fff0000) >> 16;
if (!action)
switch(action & 0xf0000000) {
case PHY_READ:
case PHY_DATA_OR:
case PHY_DATA_AND:
case PHY_READ_EFUSE:
case PHY_CLEAR_READCOUNT:
case PHY_WRITE:
case PHY_WRITE_PREVIOUS:
case PHY_DELAY_MS:
break;
if ((action & 0xf0000000) != PHY_WRITE) {
netif_err(tp, probe, dev,
"unknown action 0x%08x\n", action);
case PHY_BJMPN:
if (regno > index) {
netif_err(tp, probe, tp->dev,
"Out of range of firmware\n");
return;
}
break;
case PHY_READCOUNT_EQ_SKIP:
if (index + 2 >= fw_size) {
netif_err(tp, probe, tp->dev,
"Out of range of firmware\n");
return;
}
break;
case PHY_COMP_EQ_SKIPN:
case PHY_COMP_NEQ_SKIPN:
case PHY_SKIPN:
if (index + 1 + regno >= fw_size) {
netif_err(tp, probe, tp->dev,
"Out of range of firmware\n");
return;
}
break;
case PHY_READ_MAC_BYTE:
case PHY_WRITE_MAC_BYTE:
case PHY_WRITE_ERI_WORD:
default:
netif_err(tp, probe, tp->dev,
"Invalid action 0x%08x\n", action);
return;
}
}
while (i-- != 0) {
u32 action = le32_to_cpu(*phytable);
predata = 0;
count = 0;
for (index = 0; index < fw_size; ) {
u32 action = le32_to_cpu(phytable[index]);
u32 data = action & 0x0000ffff;
u32 reg = (action & 0x0fff0000) >> 16;
u32 regno = (action & 0x0fff0000) >> 16;
if (!action)
break;
switch(action & 0xf0000000) {
case PHY_WRITE:
rtl_writephy(tp, reg, data);
phytable++;
case PHY_READ:
predata = rtl_readphy(tp, regno);
count++;
index++;
break;
case PHY_DATA_OR:
predata |= data;
index++;
break;
case PHY_DATA_AND:
predata &= data;
index++;
break;
case PHY_BJMPN:
index -= regno;
break;
case PHY_READ_EFUSE:
predata = rtl8168d_efuse_read(tp->mmio_addr, regno);
index++;
break;
case PHY_CLEAR_READCOUNT:
count = 0;
index++;
break;
case PHY_WRITE:
rtl_writephy(tp, regno, data);
index++;
break;
case PHY_READCOUNT_EQ_SKIP:
if (count == data)
index += 2;
else
index += 1;
break;
case PHY_COMP_EQ_SKIPN:
if (predata == data)
index += regno;
index++;
break;
case PHY_COMP_NEQ_SKIPN:
if (predata != data)
index += regno;
index++;
break;
case PHY_WRITE_PREVIOUS:
rtl_writephy(tp, regno, predata);
index++;
break;
case PHY_SKIPN:
index += regno + 1;
break;
case PHY_DELAY_MS:
mdelay(data);
index++;
break;
case PHY_READ_MAC_BYTE:
case PHY_WRITE_MAC_BYTE:
case PHY_WRITE_ERI_WORD:
default:
BUG();
}
@ -3069,15 +3167,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
rtl8168_driver_start(tp);
}
rtl8169_init_phy(dev, tp);
/*
* Pretend we are using VLANs; This bypasses a nasty bug where
* Interrupts stop flowing on high load on 8110SCd controllers.
*/
if (tp->mac_version == RTL_GIGA_MAC_VER_05)
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
if (pci_dev_run_wake(pdev))
@ -3127,6 +3216,7 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
static int rtl8169_open(struct net_device *dev)
{
struct rtl8169_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
struct pci_dev *pdev = tp->pci_dev;
int retval = -ENOMEM;
@ -3162,6 +3252,15 @@ static int rtl8169_open(struct net_device *dev)
napi_enable(&tp->napi);
rtl8169_init_phy(dev, tp);
/*
* Pretend we are using VLANs; This bypasses a nasty bug where
* Interrupts stop flowing on high load on 8110SCd controllers.
*/
if (tp->mac_version == RTL_GIGA_MAC_VER_05)
RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
rtl_pll_power_up(tp);
rtl_hw_start(dev);
@ -3171,7 +3270,7 @@ static int rtl8169_open(struct net_device *dev)
tp->saved_wolopts = 0;
pm_runtime_put_noidle(&pdev->dev);
rtl8169_check_link_status(dev, tp, tp->mmio_addr);
rtl8169_check_link_status(dev, tp, ioaddr);
out:
return retval;

143
drivers/net/sky2.c
View File

@ -46,10 +46,6 @@
#include <asm/irq.h>
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define SKY2_VLAN_TAG_USED 1
#endif
#include "sky2.h"
#define DRV_NAME "sky2"
@ -1326,39 +1322,34 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return err;
}
#ifdef SKY2_VLAN_TAG_USED
static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
{
if (onoff) {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_ON);
} else {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_OFF);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
}
}
#define NETIF_F_ALL_VLAN (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX)
static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
static void sky2_vlan_mode(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
u16 port = sky2->port;
netif_tx_lock_bh(dev);
napi_disable(&hw->napi);
if (dev->features & NETIF_F_HW_VLAN_RX)
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
else
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_OFF);
sky2->vlgrp = grp;
sky2_set_vlan_mode(hw, port, grp != NULL);
dev->vlan_features = dev->features &~ NETIF_F_ALL_VLAN;
if (dev->features & NETIF_F_HW_VLAN_TX)
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_ON);
else {
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
netif_tx_unlock_bh(dev);
/* Can't do transmit offload of vlan without hw vlan */
dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_SG
| NETIF_F_ALL_CSUM);
}
}
#endif
/* Amount of required worst case padding in rx buffer */
static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
@ -1635,9 +1626,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
sky2->tx_ring_size - 1);
#ifdef SKY2_VLAN_TAG_USED
sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
#endif
sky2_vlan_mode(sky2->netdev);
sky2_rx_start(sky2);
}
@ -1780,7 +1769,7 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
}
ctrl = 0;
#ifdef SKY2_VLAN_TAG_USED
/* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
if (vlan_tx_tag_present(skb)) {
if (!le) {
@ -1792,7 +1781,6 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
le->length = cpu_to_be16(vlan_tx_tag_get(skb));
ctrl |= INS_VLAN;
}
#endif
/* Handle TCP checksum offload */
if (skb->ip_summed == CHECKSUM_PARTIAL) {
@ -2432,11 +2420,8 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
struct sk_buff *skb = NULL;
u16 count = (status & GMR_FS_LEN) >> 16;
#ifdef SKY2_VLAN_TAG_USED
/* Account for vlan tag */
if (sky2->vlgrp && (status & GMR_FS_VLAN))
count -= VLAN_HLEN;
#endif
if (status & GMR_FS_VLAN)
count -= VLAN_HLEN; /* Account for vlan tag */
netif_printk(sky2, rx_status, KERN_DEBUG, dev,
"rx slot %u status 0x%x len %d\n",
@ -2504,17 +2489,9 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
static inline void sky2_skb_rx(const struct sky2_port *sky2,
u32 status, struct sk_buff *skb)
{
#ifdef SKY2_VLAN_TAG_USED
u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
if (skb->ip_summed == CHECKSUM_NONE)
vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
else
vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
vlan_tag, skb);
return;
}
#endif
if (status & GMR_FS_VLAN)
__vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag));
if (skb->ip_summed == CHECKSUM_NONE)
netif_receive_skb(skb);
else
@ -2631,7 +2608,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
goto exit_loop;
break;
#ifdef SKY2_VLAN_TAG_USED
case OP_RXVLAN:
sky2->rx_tag = length;
break;
@ -2639,7 +2615,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
case OP_RXCHKSVLAN:
sky2->rx_tag = length;
/* fall through */
#endif
case OP_RXCHKS:
if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
sky2_rx_checksum(sky2, status);
@ -3042,6 +3017,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
| SKY2_HW_NEW_LE
| SKY2_HW_AUTO_TX_SUM
| SKY2_HW_ADV_POWER_CTL;
/* The workaround for status conflicts VLAN tag detection. */
if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
hw->flags |= SKY2_HW_VLAN_BROKEN;
break;
case CHIP_ID_YUKON_SUPR:
@ -3411,18 +3390,15 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw)
u32 modes = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
| SUPPORTED_Autoneg | SUPPORTED_TP;
| SUPPORTED_100baseT_Full;
if (hw->flags & SKY2_HW_GIGABIT)
modes |= SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full;
return modes;
} else
return SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full
| SUPPORTED_Autoneg
| SUPPORTED_FIBRE;
return SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full;
}
static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@ -3436,9 +3412,11 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
if (sky2_is_copper(hw)) {
ecmd->port = PORT_TP;
ecmd->speed = sky2->speed;
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
} else {
ecmd->speed = SPEED_1000;
ecmd->port = PORT_FIBRE;
ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
}
ecmd->advertising = sky2->advertising;
@ -3455,8 +3433,19 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
u32 supported = sky2_supported_modes(hw);
if (ecmd->autoneg == AUTONEG_ENABLE) {
if (ecmd->advertising & ~supported)
return -EINVAL;
if (sky2_is_copper(hw))
sky2->advertising = ecmd->advertising |
ADVERTISED_TP |
ADVERTISED_Autoneg;
else
sky2->advertising = ecmd->advertising |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
sky2->flags |= SKY2_FLAG_AUTO_SPEED;
ecmd->advertising = supported;
sky2->duplex = -1;
sky2->speed = -1;
} else {
@ -3500,8 +3489,6 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
}
sky2->advertising = ecmd->advertising;
if (netif_running(dev)) {
sky2_phy_reinit(sky2);
sky2_set_multicast(dev);
@ -4229,15 +4216,28 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
static int sky2_set_flags(struct net_device *dev, u32 data)
{
struct sky2_port *sky2 = netdev_priv(dev);
u32 supported =
(sky2->hw->flags & SKY2_HW_RSS_BROKEN) ? 0 : ETH_FLAG_RXHASH;
unsigned long old_feat = dev->features;
u32 supported = 0;
int rc;
if (!(sky2->hw->flags & SKY2_HW_RSS_BROKEN))
supported |= ETH_FLAG_RXHASH;
if (!(sky2->hw->flags & SKY2_HW_VLAN_BROKEN))
supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
printk(KERN_DEBUG "sky2 set_flags: supported %x data %x\n",
supported, data);
rc = ethtool_op_set_flags(dev, data, supported);
if (rc)
return rc;
rx_set_rss(dev);
if ((old_feat ^ dev->features) & NETIF_F_RXHASH)
rx_set_rss(dev);
if ((old_feat ^ dev->features) & NETIF_F_ALL_VLAN)
sky2_vlan_mode(dev);
return 0;
}
@ -4273,6 +4273,7 @@ static const struct ethtool_ops sky2_ethtool_ops = {
.get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
.set_flags = sky2_set_flags,
.get_flags = ethtool_op_get_flags,
};
#ifdef CONFIG_SKY2_DEBUG
@ -4554,9 +4555,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
.ndo_change_mtu = sky2_change_mtu,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
#ifdef SKY2_VLAN_TAG_USED
.ndo_vlan_rx_register = sky2_vlan_rx_register,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = sky2_netpoll,
#endif
@ -4572,9 +4570,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
.ndo_change_mtu = sky2_change_mtu,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
#ifdef SKY2_VLAN_TAG_USED
.ndo_vlan_rx_register = sky2_vlan_rx_register,
#endif
},
};
@ -4625,7 +4620,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
sky2->port = port;
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG
| NETIF_F_TSO | NETIF_F_GRO;
| NETIF_F_TSO | NETIF_F_GRO;
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
@ -4633,13 +4629,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
dev->features |= NETIF_F_RXHASH;
#ifdef SKY2_VLAN_TAG_USED
/* The workaround for FE+ status conflicts with VLAN tag detection. */
if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
if (!(hw->flags & SKY2_HW_VLAN_BROKEN))
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
}
#endif
/* read the mac address */
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);

6
drivers/net/sky2.h
View File

@ -2236,11 +2236,8 @@ struct sky2_port {
u16 rx_pending;
u16 rx_data_size;
u16 rx_nfrags;
#ifdef SKY2_VLAN_TAG_USED
u16 rx_tag;
struct vlan_group *vlgrp;
#endif
struct {
unsigned long last;
u32 mac_rp;
@ -2284,6 +2281,7 @@ struct sky2_hw {
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
#define SKY2_HW_RSS_BROKEN 0x00000100
#define SKY2_HW_VLAN_BROKEN 0x00000200
u8 chip_id;
u8 chip_rev;

2
drivers/net/xen-netfront.c
View File

@ -488,7 +488,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(!netif_carrier_ok(dev) ||
(frags > 1 && !xennet_can_sg(dev)) ||
netif_needs_gso(dev, skb))) {
netif_needs_gso(skb, netif_skb_features(skb)))) {
spin_unlock_irq(&np->tx_lock);
goto drop;
}

1
include/linux/bfin_mac.h
View File

@ -24,6 +24,7 @@ struct bfin_mii_bus_platform_data {
const unsigned short *mac_peripherals;
int phy_mode;
unsigned int phy_mask;
unsigned short vlan1_mask, vlan2_mask;
};
#endif

4
include/linux/etherdevice.h
View File

@ -48,8 +48,10 @@ extern int eth_validate_addr(struct net_device *dev);
extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count);
extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
unsigned int rxqs);
#define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
#define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
/**
* is_zero_ether_addr - Determine if give Ethernet address is all zeros.

3
include/linux/fec.h
View File

@ -3,6 +3,8 @@
* Copyright (c) 2009 Orex Computed Radiography
* Baruch Siach <baruch@tkos.co.il>
*
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* Header file for the FEC platform data
*
* This program is free software; you can redistribute it and/or modify
@ -16,6 +18,7 @@
struct fec_platform_data {
phy_interface_t phy;
unsigned char mac[ETH_ALEN];
};
#endif

2
include/linux/if_bridge.h
View File

@ -103,7 +103,7 @@ struct __fdb_entry {
extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
typedef int (*br_should_route_hook_t)(struct sk_buff *skb);
typedef int br_should_route_hook_t(struct sk_buff *skb);
extern br_should_route_hook_t __rcu *br_should_route_hook;
#endif

24
include/linux/netdevice.h
View File

@ -2191,11 +2191,15 @@ static inline void netif_addr_unlock_bh(struct net_device *dev)
extern void ether_setup(struct net_device *dev);
/* Support for loadable net-drivers */
extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
extern struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
void (*setup)(struct net_device *),
unsigned int queue_count);
unsigned int txqs, unsigned int rxqs);
#define alloc_netdev(sizeof_priv, name, setup) \
alloc_netdev_mq(sizeof_priv, name, setup, 1)
alloc_netdev_mqs(sizeof_priv, name, setup, 1, 1)
#define alloc_netdev_mq(sizeof_priv, name, setup, count) \
alloc_netdev_mqs(sizeof_priv, name, setup, count, count)
extern int register_netdev(struct net_device *dev);
extern void unregister_netdev(struct net_device *dev);
@ -2303,7 +2307,7 @@ unsigned long netdev_fix_features(unsigned long features, const char *name);
void netif_stacked_transfer_operstate(const struct net_device *rootdev,
struct net_device *dev);
int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev);
int netif_skb_features(struct sk_buff *skb);
static inline int net_gso_ok(int features, int gso_type)
{
@ -2317,16 +2321,10 @@ static inline int skb_gso_ok(struct sk_buff *skb, int features)
(!skb_has_frag_list(skb) || (features & NETIF_F_FRAGLIST));
}
static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
static inline int netif_needs_gso(struct sk_buff *skb, int features)
{
if (skb_is_gso(skb)) {
int features = netif_get_vlan_features(skb, dev);
return (!skb_gso_ok(skb, features) ||
unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
}
return 0;
return skb_is_gso(skb) && (!skb_gso_ok(skb, features) ||
unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
}
static inline void netif_set_gso_max_size(struct net_device *dev,

10
include/linux/netfilter/x_tables.h
View File

@ -472,7 +472,7 @@ extern void xt_free_table_info(struct xt_table_info *info);
* necessary for reading the counters.
*/
struct xt_info_lock {
spinlock_t lock;
seqlock_t lock;
unsigned char readers;
};
DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
@ -497,7 +497,7 @@ static inline void xt_info_rdlock_bh(void)
local_bh_disable();
lock = &__get_cpu_var(xt_info_locks);
if (likely(!lock->readers++))
spin_lock(&lock->lock);
write_seqlock(&lock->lock);
}
static inline void xt_info_rdunlock_bh(void)
@ -505,7 +505,7 @@ static inline void xt_info_rdunlock_bh(void)
struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
if (likely(!--lock->readers))
spin_unlock(&lock->lock);
write_sequnlock(&lock->lock);
local_bh_enable();
}
@ -516,12 +516,12 @@ static inline void xt_info_rdunlock_bh(void)
*/
static inline void xt_info_wrlock(unsigned int cpu)
{
spin_lock(&per_cpu(xt_info_locks, cpu).lock);
write_seqlock(&per_cpu(xt_info_locks, cpu).lock);
}
static inline void xt_info_wrunlock(unsigned int cpu)
{
spin_unlock(&per_cpu(xt_info_locks, cpu).lock);
write_sequnlock(&per_cpu(xt_info_locks, cpu).lock);
}
/*

2
include/net/ah.h
View File

@ -4,7 +4,7 @@
#include <linux/skbuff.h>
/* This is the maximum truncated ICV length that we know of. */
#define MAX_AH_AUTH_LEN 12
#define MAX_AH_AUTH_LEN 16
struct crypto_ahash;

1
include/net/arp.h
View File

@ -25,5 +25,6 @@ extern struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip,
const unsigned char *src_hw,
const unsigned char *target_hw);
extern void arp_xmit(struct sk_buff *skb);
int arp_invalidate(struct net_device *dev, __be32 ip);
#endif /* _ARP_H */

4
include/net/phonet/phonet.h
View File

@ -107,8 +107,8 @@ struct phonet_protocol {
int sock_type;
};
int phonet_proto_register(int protocol, struct phonet_protocol *pp);
void phonet_proto_unregister(int protocol, struct phonet_protocol *pp);
int phonet_proto_register(unsigned int protocol, struct phonet_protocol *pp);
void phonet_proto_unregister(unsigned int protocol, struct phonet_protocol *pp);
int phonet_sysctl_init(void);
void phonet_sysctl_exit(void);

20
include/net/sch_generic.h
View File

@ -207,7 +207,7 @@ static inline int qdisc_qlen(struct Qdisc *q)
return q->q.qlen;
}
static inline struct qdisc_skb_cb *qdisc_skb_cb(struct sk_buff *skb)
static inline struct qdisc_skb_cb *qdisc_skb_cb(const struct sk_buff *skb)
{
return (struct qdisc_skb_cb *)skb->cb;
}
@ -394,7 +394,7 @@ static inline bool qdisc_tx_is_noop(const struct net_device *dev)
return true;
}
static inline unsigned int qdisc_pkt_len(struct sk_buff *skb)
static inline unsigned int qdisc_pkt_len(const struct sk_buff *skb)
{
return qdisc_skb_cb(skb)->pkt_len;
}
@ -426,10 +426,18 @@ static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch)
return qdisc_enqueue(skb, sch) & NET_XMIT_MASK;
}
static inline void __qdisc_update_bstats(struct Qdisc *sch, unsigned int len)
static inline void bstats_update(struct gnet_stats_basic_packed *bstats,
const struct sk_buff *skb)
{
sch->bstats.bytes += len;
sch->bstats.packets++;
bstats->bytes += qdisc_pkt_len(skb);
bstats->packets += skb_is_gso(skb) ? skb_shinfo(skb)->gso_segs : 1;
}
static inline void qdisc_bstats_update(struct Qdisc *sch,
const struct sk_buff *skb)
{
bstats_update(&sch->bstats, skb);
}
static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
@ -437,7 +445,7 @@ static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch,
{
__skb_queue_tail(list, skb);
sch->qstats.backlog += qdisc_pkt_len(skb);
__qdisc_update_bstats(sch, qdisc_pkt_len(skb));
qdisc_bstats_update(sch, skb);
return NET_XMIT_SUCCESS;
}

4
include/net/sock.h
View File

@ -152,14 +152,18 @@ struct sock_common {
* fields between dontcopy_begin/dontcopy_end
* are not copied in sock_copy()
*/
/* private: */
int skc_dontcopy_begin[0];
/* public: */
union {
struct hlist_node skc_node;
struct hlist_nulls_node skc_nulls_node;
};
int skc_tx_queue_mapping;
atomic_t skc_refcnt;
/* private: */
int skc_dontcopy_end[0];
/* public: */
};
/**

2
net/caif/caif_socket.c
View File

@ -740,12 +740,12 @@ static int setsockopt(struct socket *sock,
if (cf_sk->sk.sk_protocol != CAIFPROTO_UTIL)
return -ENOPROTOOPT;
lock_sock(&(cf_sk->sk));
cf_sk->conn_req.param.size = ol;
if (ol > sizeof(cf_sk->conn_req.param.data) ||
copy_from_user(&cf_sk->conn_req.param.data, ov, ol)) {
release_sock(&cf_sk->sk);
return -EINVAL;
}
cf_sk->conn_req.param.size = ol;
release_sock(&cf_sk->sk);
return 0;

18
net/caif/chnl_net.c
View File

@ -76,6 +76,8 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt)
struct chnl_net *priv = container_of(layr, struct chnl_net, chnl);
int pktlen;
int err = 0;
const u8 *ip_version;
u8 buf;
priv = container_of(layr, struct chnl_net, chnl);
@ -90,7 +92,21 @@ static int chnl_recv_cb(struct cflayer *layr, struct cfpkt *pkt)
* send the packet to the net stack.
*/
skb->dev = priv->netdev;
skb->protocol = htons(ETH_P_IP);
/* check the version of IP */
ip_version = skb_header_pointer(skb, 0, 1, &buf);
if (!ip_version)
return -EINVAL;
switch (*ip_version >> 4) {
case 4:
skb->protocol = htons(ETH_P_IP);
break;
case 6:
skb->protocol = htons(ETH_P_IPV6);
break;
default:
return -EINVAL;
}
/* If we change the header in loop mode, the checksum is corrupted. */
if (priv->conn_req.protocol == CAIFPROTO_DATAGRAM_LOOP)

149
net/core/dev.c
View File

@ -1732,33 +1732,6 @@ void netif_device_attach(struct net_device *dev)
}
EXPORT_SYMBOL(netif_device_attach);
static bool can_checksum_protocol(unsigned long features, __be16 protocol)
{
return ((features & NETIF_F_NO_CSUM) ||
((features & NETIF_F_V4_CSUM) &&
protocol == htons(ETH_P_IP)) ||
((features & NETIF_F_V6_CSUM) &&
protocol == htons(ETH_P_IPV6)) ||
((features & NETIF_F_FCOE_CRC) &&
protocol == htons(ETH_P_FCOE)));
}
static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb)
{
__be16 protocol = skb->protocol;
int features = dev->features;
if (vlan_tx_tag_present(skb)) {
features &= dev->vlan_features;
} else if (protocol == htons(ETH_P_8021Q)) {
struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
protocol = veh->h_vlan_encapsulated_proto;
features &= dev->vlan_features;
}
return can_checksum_protocol(features, protocol);
}
/**
* skb_dev_set -- assign a new device to a buffer
* @skb: buffer for the new device
@ -1971,16 +1944,14 @@ static void dev_gso_skb_destructor(struct sk_buff *skb)
/**
* dev_gso_segment - Perform emulated hardware segmentation on skb.
* @skb: buffer to segment
* @features: device features as applicable to this skb
*
* This function segments the given skb and stores the list of segments
* in skb->next.
*/
static int dev_gso_segment(struct sk_buff *skb)
static int dev_gso_segment(struct sk_buff *skb, int features)
{
struct net_device *dev = skb->dev;
struct sk_buff *segs;
int features = dev->features & ~(illegal_highdma(dev, skb) ?
NETIF_F_SG : 0);
segs = skb_gso_segment(skb, features);
@ -2017,22 +1988,52 @@ static inline void skb_orphan_try(struct sk_buff *skb)
}
}
int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev)
static bool can_checksum_protocol(unsigned long features, __be16 protocol)
{
return ((features & NETIF_F_GEN_CSUM) ||
((features & NETIF_F_V4_CSUM) &&
protocol == htons(ETH_P_IP)) ||
((features & NETIF_F_V6_CSUM) &&
protocol == htons(ETH_P_IPV6)) ||
((features & NETIF_F_FCOE_CRC) &&
protocol == htons(ETH_P_FCOE)));
}
static int harmonize_features(struct sk_buff *skb, __be16 protocol, int features)
{
if (!can_checksum_protocol(protocol, features)) {
features &= ~NETIF_F_ALL_CSUM;
features &= ~NETIF_F_SG;
} else if (illegal_highdma(skb->dev, skb)) {
features &= ~NETIF_F_SG;
}
return features;
}
int netif_skb_features(struct sk_buff *skb)
{
__be16 protocol = skb->protocol;
int features = skb->dev->features;
if (protocol == htons(ETH_P_8021Q)) {
struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
protocol = veh->h_vlan_encapsulated_proto;
} else if (!skb->vlan_tci)
return dev->features;
} else if (!vlan_tx_tag_present(skb)) {
return harmonize_features(skb, protocol, features);
}
if (protocol != htons(ETH_P_8021Q))
return dev->features & dev->vlan_features;
else
return 0;
features &= skb->dev->vlan_features;
if (protocol != htons(ETH_P_8021Q)) {
return harmonize_features(skb, protocol, features);
} else {
features &= NETIF_F_SG | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
NETIF_F_GEN_CSUM;
return harmonize_features(skb, protocol, features);
}
}
EXPORT_SYMBOL(netif_get_vlan_features);
EXPORT_SYMBOL(netif_skb_features);
/*
* Returns true if either:
@ -2042,22 +2043,13 @@ EXPORT_SYMBOL(netif_get_vlan_features);
* support DMA from it.
*/
static inline int skb_needs_linearize(struct sk_buff *skb,
struct net_device *dev)
int features)
{
if (skb_is_nonlinear(skb)) {
int features = dev->features;
if (vlan_tx_tag_present(skb))
features &= dev->vlan_features;
return (skb_has_frag_list(skb) &&
!(features & NETIF_F_FRAGLIST)) ||
return skb_is_nonlinear(skb) &&
((skb_has_frag_list(skb) &&
!(features & NETIF_F_FRAGLIST)) ||
(skb_shinfo(skb)->nr_frags &&
(!(features & NETIF_F_SG) ||
illegal_highdma(dev, skb)));
}
return 0;
!(features & NETIF_F_SG)));
}
int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@ -2067,6 +2059,8 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
int rc = NETDEV_TX_OK;
if (likely(!skb->next)) {
int features;
/*
* If device doesnt need skb->dst, release it right now while
* its hot in this cpu cache
@ -2079,8 +2073,10 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
skb_orphan_try(skb);
features = netif_skb_features(skb);
if (vlan_tx_tag_present(skb) &&
!(dev->features & NETIF_F_HW_VLAN_TX)) {
!(features & NETIF_F_HW_VLAN_TX)) {
skb = __vlan_put_tag(skb, vlan_tx_tag_get(skb));
if (unlikely(!skb))
goto out;
@ -2088,13 +2084,13 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
skb->vlan_tci = 0;
}
if (netif_needs_gso(dev, skb)) {
if (unlikely(dev_gso_segment(skb)))
if (netif_needs_gso(skb, features)) {
if (unlikely(dev_gso_segment(skb, features)))
goto out_kfree_skb;
if (skb->next)
goto gso;
} else {
if (skb_needs_linearize(skb, dev) &&
if (skb_needs_linearize(skb, features) &&
__skb_linearize(skb))
goto out_kfree_skb;
@ -2105,7 +2101,7 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
if (skb->ip_summed == CHECKSUM_PARTIAL) {
skb_set_transport_header(skb,
skb_checksum_start_offset(skb));
if (!dev_can_checksum(dev, skb) &&
if (!(features & NETIF_F_ALL_CSUM) &&
skb_checksum_help(skb))
goto out_kfree_skb;
}
@ -2301,7 +2297,10 @@ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
*/
if (!(dev->priv_flags & IFF_XMIT_DST_RELEASE))
skb_dst_force(skb);
__qdisc_update_bstats(q, skb->len);
qdisc_skb_cb(skb)->pkt_len = skb->len;
qdisc_bstats_update(q, skb);
if (sch_direct_xmit(skb, q, dev, txq, root_lock)) {
if (unlikely(contended)) {
spin_unlock(&q->busylock);
@ -5621,18 +5620,20 @@ struct netdev_queue *dev_ingress_queue_create(struct net_device *dev)
}
/**
* alloc_netdev_mq - allocate network device
* alloc_netdev_mqs - allocate network device
* @sizeof_priv: size of private data to allocate space for
* @name: device name format string
* @setup: callback to initialize device
* @queue_count: the number of subqueues to allocate
* @txqs: the number of TX subqueues to allocate
* @rxqs: the number of RX subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
* and performs basic initialization. Also allocates subquue structs
* for each queue on the device at the end of the netdevice.
* for each queue on the device.
*/
struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
void (*setup)(struct net_device *), unsigned int queue_count)
struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
void (*setup)(struct net_device *),
unsigned int txqs, unsigned int rxqs)
{
struct net_device *dev;
size_t alloc_size;
@ -5640,12 +5641,20 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
BUG_ON(strlen(name) >= sizeof(dev->name));
if (queue_count < 1) {
if (txqs < 1) {
pr_err("alloc_netdev: Unable to allocate device "
"with zero queues.\n");
return NULL;
}
#ifdef CONFIG_RPS
if (rxqs < 1) {
pr_err("alloc_netdev: Unable to allocate device "
"with zero RX queues.\n");
return NULL;
}
#endif
alloc_size = sizeof(struct net_device);
if (sizeof_priv) {
/* ensure 32-byte alignment of private area */
@ -5676,14 +5685,14 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
dev_net_set(dev, &init_net);
dev->num_tx_queues = queue_count;
dev->real_num_tx_queues = queue_count;
dev->num_tx_queues = txqs;
dev->real_num_tx_queues = txqs;
if (netif_alloc_netdev_queues(dev))
goto free_pcpu;
#ifdef CONFIG_RPS
dev->num_rx_queues = queue_count;
dev->real_num_rx_queues = queue_count;
dev->num_rx_queues = rxqs;
dev->real_num_rx_queues = rxqs;
if (netif_alloc_rx_queues(dev))
goto free_pcpu;
#endif
@ -5711,7 +5720,7 @@ free_p:
kfree(p);
return NULL;
}
EXPORT_SYMBOL(alloc_netdev_mq);
EXPORT_SYMBOL(alloc_netdev_mqs);
/**
* free_netdev - free network device

2
net/core/filter.c
View File

@ -158,7 +158,7 @@ EXPORT_SYMBOL(sk_filter);
/**
* sk_run_filter - run a filter on a socket
* @skb: buffer to run the filter on
* @filter: filter to apply
* @fentry: filter to apply
*
* Decode and apply filter instructions to the skb->data.
* Return length to keep, 0 for none. @skb is the data we are

2
net/core/rtnetlink.c
View File

@ -1820,7 +1820,7 @@ static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
if (kind != 2 && security_netlink_recv(skb, CAP_NET_ADMIN))
return -EPERM;
if (kind == 2 && nlh->nlmsg_flags&NLM_F_DUMP) {
if (kind == 2 && (nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP) {
struct sock *rtnl;
rtnl_dumpit_func dumpit;

3
net/dccp/dccp.h
View File

@ -426,7 +426,8 @@ static inline void dccp_update_gsr(struct sock *sk, u64 seq)
{
struct dccp_sock *dp = dccp_sk(sk);
dp->dccps_gsr = seq;
if (after48(seq, dp->dccps_gsr))
dp->dccps_gsr = seq;
/* Sequence validity window depends on remote Sequence Window (7.5.1) */
dp->dccps_swl = SUB48(ADD48(dp->dccps_gsr, 1), dp->dccps_r_seq_win / 4);
/*

2
net/dccp/input.c
View File

@ -260,7 +260,7 @@ static int dccp_check_seqno(struct sock *sk, struct sk_buff *skb)
*/
if (time_before(now, (dp->dccps_rate_last +
sysctl_dccp_sync_ratelimit)))
return 0;
return -1;
DCCP_WARN("Step 6 failed for %s packet, "
"(LSWL(%llu) <= P.seqno(%llu) <= S.SWH(%llu)) and "

4
net/dccp/sysctl.c
View File

@ -21,7 +21,8 @@
/* Boundary values */
static int zero = 0,
u8_max = 0xFF;
static unsigned long seqw_min = 32;
static unsigned long seqw_min = DCCPF_SEQ_WMIN,
seqw_max = 0xFFFFFFFF; /* maximum on 32 bit */
static struct ctl_table dccp_default_table[] = {
{
@ -31,6 +32,7 @@ static struct ctl_table dccp_default_table[] = {
.mode = 0644,
.proc_handler = proc_doulongvec_minmax,
.extra1 = &seqw_min, /* RFC 4340, 7.5.2 */
.extra2 = &seqw_max,
},
{
.procname = "rx_ccid",

12
net/ethernet/eth.c
View File

@ -347,10 +347,11 @@ void ether_setup(struct net_device *dev)
EXPORT_SYMBOL(ether_setup);
/**
* alloc_etherdev_mq - Allocates and sets up an Ethernet device
* alloc_etherdev_mqs - Allocates and sets up an Ethernet device
* @sizeof_priv: Size of additional driver-private structure to be allocated
* for this Ethernet device
* @queue_count: The number of queues this device has.
* @txqs: The number of TX queues this device has.
* @txqs: The number of RX queues this device has.
*
* Fill in the fields of the device structure with Ethernet-generic
* values. Basically does everything except registering the device.
@ -360,11 +361,12 @@ EXPORT_SYMBOL(ether_setup);
* this private data area.
*/
struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count)
struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
unsigned int rxqs)
{
return alloc_netdev_mq(sizeof_priv, "eth%d", ether_setup, queue_count);
return alloc_netdev_mqs(sizeof_priv, "eth%d", ether_setup, txqs, rxqs);
}
EXPORT_SYMBOL(alloc_etherdev_mq);
EXPORT_SYMBOL(alloc_etherdev_mqs);
static size_t _format_mac_addr(char *buf, int buflen,
const unsigned char *addr, int len)

7
net/ipv4/ah4.c
View File

@ -314,14 +314,15 @@ static int ah_input(struct xfrm_state *x, struct sk_buff *skb)
skb->ip_summed = CHECKSUM_NONE;
ah = (struct ip_auth_hdr *)skb->data;
iph = ip_hdr(skb);
ihl = ip_hdrlen(skb);
if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
goto out;
nfrags = err;
ah = (struct ip_auth_hdr *)skb->data;
iph = ip_hdr(skb);
ihl = ip_hdrlen(skb);
work_iph = ah_alloc_tmp(ahash, nfrags, ihl + ahp->icv_trunc_len);
if (!work_iph)
goto out;

29
net/ipv4/arp.c
View File

@ -1143,6 +1143,23 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev)
return err;
}
int arp_invalidate(struct net_device *dev, __be32 ip)
{
struct neighbour *neigh = neigh_lookup(&arp_tbl, &ip, dev);
int err = -ENXIO;
if (neigh) {
if (neigh->nud_state & ~NUD_NOARP)
err = neigh_update(neigh, NULL, NUD_FAILED,
NEIGH_UPDATE_F_OVERRIDE|
NEIGH_UPDATE_F_ADMIN);
neigh_release(neigh);
}
return err;
}
EXPORT_SYMBOL(arp_invalidate);
static int arp_req_delete_public(struct net *net, struct arpreq *r,
struct net_device *dev)
{
@ -1163,7 +1180,6 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
{
int err;
__be32 ip;
struct neighbour *neigh;
if (r->arp_flags & ATF_PUBL)
return arp_req_delete_public(net, r, dev);
@ -1181,16 +1197,7 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
if (!dev)
return -EINVAL;
}
err = -ENXIO;
neigh = neigh_lookup(&arp_tbl, &ip, dev);
if (neigh) {
if (neigh->nud_state & ~NUD_NOARP)
err = neigh_update(neigh, NULL, NUD_FAILED,
NEIGH_UPDATE_F_OVERRIDE|
NEIGH_UPDATE_F_ADMIN);
neigh_release(neigh);
}
return err;
return arp_invalidate(dev, ip);
}
/*

5
net/ipv4/inet_connection_sock.c
View File

@ -73,7 +73,7 @@ int inet_csk_bind_conflict(const struct sock *sk,
!sk2->sk_bound_dev_if ||
sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) {
if (!reuse || !sk2->sk_reuse ||
sk2->sk_state == TCP_LISTEN) {
((1 << sk2->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))) {
const __be32 sk2_rcv_saddr = sk_rcv_saddr(sk2);
if (!sk2_rcv_saddr || !sk_rcv_saddr(sk) ||
sk2_rcv_saddr == sk_rcv_saddr(sk))
@ -122,7 +122,8 @@ again:
(tb->num_owners < smallest_size || smallest_size == -1)) {
smallest_size = tb->num_owners;
smallest_rover = rover;
if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) {
if (atomic_read(&hashinfo->bsockets) > (high - low) + 1 &&
!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) {
spin_unlock(&head->lock);
snum = smallest_rover;
goto have_snum;

2
net/ipv4/inet_diag.c
View File

@ -858,7 +858,7 @@ static int inet_diag_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
nlmsg_len(nlh) < hdrlen)
return -EINVAL;
if (nlh->nlmsg_flags & NLM_F_DUMP) {
if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP) {
if (nlmsg_attrlen(nlh, hdrlen)) {
struct nlattr *attr;

45
net/ipv4/netfilter/arp_tables.c
View File

@ -710,42 +710,25 @@ static void get_counters(const struct xt_table_info *t,
struct arpt_entry *iter;
unsigned int cpu;
unsigned int i;
unsigned int curcpu = get_cpu();
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
*
* Bottom half has to be disabled to prevent deadlock
* if new softirq were to run and call ipt_do_table
*/
local_bh_disable();
i = 0;
xt_entry_foreach(iter, t->entries[curcpu], t->size) {
SET_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
++i;
}
local_bh_enable();
/* Processing counters from other cpus, we can let bottom half enabled,
* (preemption is disabled)
*/
for_each_possible_cpu(cpu) {
if (cpu == curcpu)
continue;
seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
i = 0;
local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
u64 bcnt, pcnt;
unsigned int start;
do {
start = read_seqbegin(lock);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
} while (read_seqretry(lock, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
}
xt_info_wrunlock(cpu);
local_bh_enable();
}
put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@ -759,7 +742,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
* about).
*/
countersize = sizeof(struct xt_counters) * private->number;
counters = vmalloc(countersize);
counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@ -1007,7 +990,7 @@ static int __do_replace(struct net *net, const char *name,
struct arpt_entry *iter;
ret = 0;
counters = vmalloc(num_counters * sizeof(struct xt_counters));
counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;

45
net/ipv4/netfilter/ip_tables.c
View File

@ -884,42 +884,25 @@ get_counters(const struct xt_table_info *t,
struct ipt_entry *iter;
unsigned int cpu;
unsigned int i;
unsigned int curcpu = get_cpu();
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU.
*
* Bottom half has to be disabled to prevent deadlock
* if new softirq were to run and call ipt_do_table
*/
local_bh_disable();
i = 0;
xt_entry_foreach(iter, t->entries[curcpu], t->size) {
SET_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
++i;
}
local_bh_enable();
/* Processing counters from other cpus, we can let bottom half enabled,
* (preemption is disabled)
*/
for_each_possible_cpu(cpu) {
if (cpu == curcpu)
continue;
seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
i = 0;
local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
u64 bcnt, pcnt;
unsigned int start;
do {
start = read_seqbegin(lock);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
} while (read_seqretry(lock, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i; /* macro does multi eval of i */
}
xt_info_wrunlock(cpu);
local_bh_enable();
}
put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@ -932,7 +915,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
(other than comefrom, which userspace doesn't care
about). */
countersize = sizeof(struct xt_counters) * private->number;
counters = vmalloc(countersize);
counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@ -1203,7 +1186,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks,
struct ipt_entry *iter;
ret = 0;
counters = vmalloc(num_counters * sizeof(struct xt_counters));
counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;

8
net/ipv6/ah6.c
View File

@ -538,14 +538,16 @@ static int ah6_input(struct xfrm_state *x, struct sk_buff *skb)
if (!pskb_may_pull(skb, ah_hlen))
goto out;
ip6h = ipv6_hdr(skb);
skb_push(skb, hdr_len);
if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
goto out;
nfrags = err;
ah = (struct ip_auth_hdr *)skb->data;
ip6h = ipv6_hdr(skb);
skb_push(skb, hdr_len);
work_iph = ah_alloc_tmp(ahash, nfrags, hdr_len + ahp->icv_trunc_len);
if (!work_iph)
goto out;

2
net/ipv6/inet6_connection_sock.c
View File

@ -44,7 +44,7 @@ int inet6_csk_bind_conflict(const struct sock *sk,
!sk2->sk_bound_dev_if ||
sk->sk_bound_dev_if == sk2->sk_bound_dev_if) &&
(!sk->sk_reuse || !sk2->sk_reuse ||
sk2->sk_state == TCP_LISTEN) &&
((1 << sk2->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))) &&
ipv6_rcv_saddr_equal(sk, sk2))
break;
}

45
net/ipv6/netfilter/ip6_tables.c
View File

@ -897,42 +897,25 @@ get_counters(const struct xt_table_info *t,
struct ip6t_entry *iter;
unsigned int cpu;
unsigned int i;
unsigned int curcpu = get_cpu();
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
*
* Bottom half has to be disabled to prevent deadlock
* if new softirq were to run and call ipt_do_table
*/
local_bh_disable();
i = 0;
xt_entry_foreach(iter, t->entries[curcpu], t->size) {
SET_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
++i;
}
local_bh_enable();
/* Processing counters from other cpus, we can let bottom half enabled,
* (preemption is disabled)
*/
for_each_possible_cpu(cpu) {
if (cpu == curcpu)
continue;
seqlock_t *lock = &per_cpu(xt_info_locks, cpu).lock;
i = 0;
local_bh_disable();
xt_info_wrlock(cpu);
xt_entry_foreach(iter, t->entries[cpu], t->size) {
ADD_COUNTER(counters[i], iter->counters.bcnt,
iter->counters.pcnt);
u64 bcnt, pcnt;
unsigned int start;
do {
start = read_seqbegin(lock);
bcnt = iter->counters.bcnt;
pcnt = iter->counters.pcnt;
} while (read_seqretry(lock, start));
ADD_COUNTER(counters[i], bcnt, pcnt);
++i;
}
xt_info_wrunlock(cpu);
local_bh_enable();
}
put_cpu();
}
static struct xt_counters *alloc_counters(const struct xt_table *table)
@ -945,7 +928,7 @@ static struct xt_counters *alloc_counters(const struct xt_table *table)
(other than comefrom, which userspace doesn't care
about). */
countersize = sizeof(struct xt_counters) * private->number;
counters = vmalloc(countersize);
counters = vzalloc(countersize);
if (counters == NULL)
return ERR_PTR(-ENOMEM);
@ -1216,7 +1199,7 @@ __do_replace(struct net *net, const char *name, unsigned int valid_hooks,
struct ip6t_entry *iter;
ret = 0;
counters = vmalloc(num_counters * sizeof(struct xt_counters));
counters = vzalloc(num_counters * sizeof(struct xt_counters));
if (!counters) {
ret = -ENOMEM;
goto out;

18
net/netfilter/nf_conntrack_netlink.c
View File

@ -645,25 +645,23 @@ ctnetlink_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
struct nfgenmsg *nfmsg = nlmsg_data(cb->nlh);
u_int8_t l3proto = nfmsg->nfgen_family;
rcu_read_lock();
spin_lock_bh(&nf_conntrack_lock);
last = (struct nf_conn *)cb->args[1];
for (; cb->args[0] < net->ct.htable_size; cb->args[0]++) {
restart:
hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[cb->args[0]],
hlist_nulls_for_each_entry(h, n, &net->ct.hash[cb->args[0]],
hnnode) {
if (NF_CT_DIRECTION(h) != IP_CT_DIR_ORIGINAL)
continue;
ct = nf_ct_tuplehash_to_ctrack(h);
if (!atomic_inc_not_zero(&ct->ct_general.use))
continue;
/* Dump entries of a given L3 protocol number.
* If it is not specified, ie. l3proto == 0,
* then dump everything. */
if (l3proto && nf_ct_l3num(ct) != l3proto)
goto releasect;
continue;
if (cb->args[1]) {
if (ct != last)
goto releasect;
continue;
cb->args[1] = 0;
}
if (ctnetlink_fill_info(skb, NETLINK_CB(cb->skb).pid,
@ -681,8 +679,6 @@ restart:
if (acct)
memset(acct, 0, sizeof(struct nf_conn_counter[IP_CT_DIR_MAX]));
}
releasect:
nf_ct_put(ct);
}
if (cb->args[1]) {
cb->args[1] = 0;
@ -690,7 +686,7 @@ releasect:
}
}
out:
rcu_read_unlock();
spin_unlock_bh(&nf_conntrack_lock);
if (last)
nf_ct_put(last);
@ -928,7 +924,7 @@ ctnetlink_get_conntrack(struct sock *ctnl, struct sk_buff *skb,
u16 zone;
int err;
if (nlh->nlmsg_flags & NLM_F_DUMP)
if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP)
return netlink_dump_start(ctnl, skb, nlh, ctnetlink_dump_table,
ctnetlink_done);
@ -1790,7 +1786,7 @@ ctnetlink_get_expect(struct sock *ctnl, struct sk_buff *skb,
u16 zone;
int err;
if (nlh->nlmsg_flags & NLM_F_DUMP) {
if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP) {
return netlink_dump_start(ctnl, skb, nlh,
ctnetlink_exp_dump_table,
ctnetlink_exp_done);

3
net/netfilter/x_tables.c
View File

@ -1325,7 +1325,8 @@ static int __init xt_init(void)
for_each_possible_cpu(i) {
struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
spin_lock_init(&lock->lock);
seqlock_init(&lock->lock);
lock->readers = 0;
}

2
net/netlink/genetlink.c
View File

@ -519,7 +519,7 @@ static int genl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
security_netlink_recv(skb, CAP_NET_ADMIN))
return -EPERM;
if (nlh->nlmsg_flags & NLM_F_DUMP) {
if ((nlh->nlmsg_flags & NLM_F_DUMP) == NLM_F_DUMP) {
if (ops->dumpit == NULL)
return -EOPNOTSUPP;

6
net/phonet/af_phonet.c
View File

@ -37,7 +37,7 @@
/* Transport protocol registration */
static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly;
static struct phonet_protocol *phonet_proto_get(int protocol)
static struct phonet_protocol *phonet_proto_get(unsigned int protocol)
{
struct phonet_protocol *pp;
@ -458,7 +458,7 @@ static struct packet_type phonet_packet_type __read_mostly = {
static DEFINE_MUTEX(proto_tab_lock);
int __init_or_module phonet_proto_register(int protocol,
int __init_or_module phonet_proto_register(unsigned int protocol,
struct phonet_protocol *pp)
{
int err = 0;
@ -481,7 +481,7 @@ int __init_or_module phonet_proto_register(int protocol,
}
EXPORT_SYMBOL(phonet_proto_register);
void phonet_proto_unregister(int protocol, struct phonet_protocol *pp)
void phonet_proto_unregister(unsigned int protocol, struct phonet_protocol *pp)
{
mutex_lock(&proto_tab_lock);
BUG_ON(proto_tab[protocol] != pp);

3
net/sched/act_csum.c
View File

@ -508,8 +508,7 @@ static int tcf_csum(struct sk_buff *skb,
spin_lock(&p->tcf_lock);
p->tcf_tm.lastuse = jiffies;
p->tcf_bstats.bytes += qdisc_pkt_len(skb);
p->tcf_bstats.packets++;
bstats_update(&p->tcf_bstats, skb);
action = p->tcf_action;
update_flags = p->update_flags;
spin_unlock(&p->tcf_lock);

3
net/sched/act_ipt.c
View File

@ -209,8 +209,7 @@ static int tcf_ipt(struct sk_buff *skb, struct tc_action *a,
spin_lock(&ipt->tcf_lock);
ipt->tcf_tm.lastuse = jiffies;
ipt->tcf_bstats.bytes += qdisc_pkt_len(skb);
ipt->tcf_bstats.packets++;
bstats_update(&ipt->tcf_bstats, skb);
/* yes, we have to worry about both in and out dev
worry later - danger - this API seems to have changed

3
net/sched/act_mirred.c
View File

@ -165,8 +165,7 @@ static int tcf_mirred(struct sk_buff *skb, struct tc_action *a,
spin_lock(&m->tcf_lock);
m->tcf_tm.lastuse = jiffies;
m->tcf_bstats.bytes += qdisc_pkt_len(skb);
m->tcf_bstats.packets++;
bstats_update(&m->tcf_bstats, skb);
dev = m->tcfm_dev;
if (!dev) {

3
net/sched/act_nat.c
View File

@ -125,8 +125,7 @@ static int tcf_nat(struct sk_buff *skb, struct tc_action *a,
egress = p->flags & TCA_NAT_FLAG_EGRESS;
action = p->tcf_action;
p->tcf_bstats.bytes += qdisc_pkt_len(skb);
p->tcf_bstats.packets++;
bstats_update(&p->tcf_bstats, skb);
spin_unlock(&p->tcf_lock);

3
net/sched/act_pedit.c
View File

@ -187,8 +187,7 @@ static int tcf_pedit(struct sk_buff *skb, struct tc_action *a,
bad:
p->tcf_qstats.overlimits++;
done:
p->tcf_bstats.bytes += qdisc_pkt_len(skb);
p->tcf_bstats.packets++;
bstats_update(&p->tcf_bstats, skb);
spin_unlock(&p->tcf_lock);
return p->tcf_action;
}

3
net/sched/act_police.c
View File

@ -298,8 +298,7 @@ static int tcf_act_police(struct sk_buff *skb, struct tc_action *a,
spin_lock(&police->tcf_lock);
police->tcf_bstats.bytes += qdisc_pkt_len(skb);
police->tcf_bstats.packets++;
bstats_update(&police->tcf_bstats, skb);
if (police->tcfp_ewma_rate &&
police->tcf_rate_est.bps >= police->tcfp_ewma_rate) {

3
net/sched/act_simple.c
View File

@ -42,8 +42,7 @@ static int tcf_simp(struct sk_buff *skb, struct tc_action *a, struct tcf_result
spin_lock(&d->tcf_lock);
d->tcf_tm.lastuse = jiffies;
d->tcf_bstats.bytes += qdisc_pkt_len(skb);
d->tcf_bstats.packets++;
bstats_update(&d->tcf_bstats, skb);
/* print policy string followed by _ then packet count
* Example if this was the 3rd packet and the string was "hello"

3
net/sched/act_skbedit.c
View File

@ -46,8 +46,7 @@ static int tcf_skbedit(struct sk_buff *skb, struct tc_action *a,
spin_lock(&d->tcf_lock);
d->tcf_tm.lastuse = jiffies;
d->tcf_bstats.bytes += qdisc_pkt_len(skb);
d->tcf_bstats.packets++;
bstats_update(&d->tcf_bstats, skb);
if (d->flags & SKBEDIT_F_PRIORITY)
skb->priority = d->priority;

6
net/sched/sch_atm.c
View File

@ -422,10 +422,8 @@ drop: __maybe_unused
}
return ret;
}
sch->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
flow->bstats.bytes += qdisc_pkt_len(skb);
flow->bstats.packets++;
qdisc_bstats_update(sch, skb);
bstats_update(&flow->bstats, skb);
/*
* Okay, this may seem weird. We pretend we've dropped the packet if
* it goes via ATM. The reason for this is that the outer qdisc

6
net/sched/sch_cbq.c
View File

@ -390,8 +390,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
ret = qdisc_enqueue(skb, cl->q);
if (ret == NET_XMIT_SUCCESS) {
sch->q.qlen++;
sch->bstats.packets++;
sch->bstats.bytes += qdisc_pkt_len(skb);
qdisc_bstats_update(sch, skb);
cbq_mark_toplevel(q, cl);
if (!cl->next_alive)
cbq_activate_class(cl);
@ -650,8 +649,7 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child)
ret = qdisc_enqueue(skb, cl->q);
if (ret == NET_XMIT_SUCCESS) {
sch->q.qlen++;
sch->bstats.packets++;
sch->bstats.bytes += qdisc_pkt_len(skb);
qdisc_bstats_update(sch, skb);
if (!cl->next_alive)
cbq_activate_class(cl);
return 0;

8
net/sched/sch_drr.c
View File

@ -351,7 +351,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
struct drr_sched *q = qdisc_priv(sch);
struct drr_class *cl;
unsigned int len;
int err;
cl = drr_classify(skb, sch, &err);
@ -362,7 +361,6 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch)
return err;
}
len = qdisc_pkt_len(skb);
err = qdisc_enqueue(skb, cl->qdisc);
if (unlikely(err != NET_XMIT_SUCCESS)) {
if (net_xmit_drop_count(err)) {
@ -377,10 +375,8 @@ static int drr_enqueue(struct sk_buff *skb, struct Qdisc *sch)
cl->deficit = cl->quantum;
}
cl->bstats.packets++;
cl->bstats.bytes += len;
sch->bstats.packets++;
sch->bstats.bytes += len;
bstats_update(&cl->bstats, skb);
qdisc_bstats_update(sch, skb);
sch->q.qlen++;
return err;

3
net/sched/sch_dsmark.c
View File

@ -260,8 +260,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch)
return err;
}
sch->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
qdisc_bstats_update(sch, skb);
sch->q.qlen++;
return NET_XMIT_SUCCESS;

6
net/sched/sch_hfsc.c
View File

@ -1599,10 +1599,8 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
if (cl->qdisc->q.qlen == 1)
set_active(cl, qdisc_pkt_len(skb));
cl->bstats.packets++;
cl->bstats.bytes += qdisc_pkt_len(skb);
sch->bstats.packets++;
sch->bstats.bytes += qdisc_pkt_len(skb);
bstats_update(&cl->bstats, skb);
qdisc_bstats_update(sch, skb);
sch->q.qlen++;
return NET_XMIT_SUCCESS;

17
net/sched/sch_htb.c
View File

@ -569,15 +569,12 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch)
}
return ret;
} else {
cl->bstats.packets +=
skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
cl->bstats.bytes += qdisc_pkt_len(skb);
bstats_update(&cl->bstats, skb);
htb_activate(q, cl);
}
sch->q.qlen++;
sch->bstats.packets += skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
sch->bstats.bytes += qdisc_pkt_len(skb);
qdisc_bstats_update(sch, skb);
return NET_XMIT_SUCCESS;
}
@ -648,12 +645,10 @@ static void htb_charge_class(struct htb_sched *q, struct htb_class *cl,
htb_add_to_wait_tree(q, cl, diff);
}
/* update byte stats except for leaves which are already updated */
if (cl->level) {
cl->bstats.bytes += bytes;
cl->bstats.packets += skb_is_gso(skb)?
skb_shinfo(skb)->gso_segs:1;
}
/* update basic stats except for leaves which are already updated */
if (cl->level)
bstats_update(&cl->bstats, skb);
cl = cl->parent;
}
}

Some files were not shown because too many files have changed in this diff Show More