Merge branch 'ieee802154-for-davem-2017-09-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next

Stefan Schmidt says:

====================
pull-request: ieee802154 2017-09-20

Here comes a pull request for ieee802154 changes I have queued up for
this merge window.

Normally these have been coming through the bluetooth tree but as this
three have been falling through the cracks so far and I have to review
and ack all of them anyway I think it makes sense if I save the
bluetooth people some work and handle them directly.

Its the first pull request I send to you so please let me know if I did
something wrong or if you prefer a different format.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ieee802154/atusb.c

@@ -21,6 +21,9 @@
  *
  * USB initialization is
  * Copyright (c) 2013 Alexander Aring <alex.aring@gmail.com>
+ *
+ * Busware HUL support is
+ * Copyright (c) 2017 Josef Filzmaier <j.filzmaier@gmx.at>
  */
 
 #include <linux/kernel.h>
@@ -42,9 +45,12 @@
 #define ATUSB_ALLOC_DELAY_MS	100	/* delay after failed allocation */
 #define ATUSB_TX_TIMEOUT_MS	200	/* on the air timeout */
 
+struct atusb_chip_data;
+
 struct atusb {
 	struct ieee802154_hw *hw;
 	struct usb_device *usb_dev;
+	struct atusb_chip_data *data;
 	int shutdown;			/* non-zero if shutting down */
 	int err;			/* set by first error */
 
@@ -65,6 +71,14 @@ struct atusb {
 	unsigned char fw_hw_type;	/* Firmware hardware type */
 };
 
+struct atusb_chip_data {
+	u16 t_channel_switch;
+	int rssi_base_val;
+
+	int (*set_channel)(struct ieee802154_hw*, u8, u8);
+	int (*set_txpower)(struct ieee802154_hw*, s32);
+};
+
 /* ----- USB commands without data ----------------------------------------- */
 
 /* To reduce the number of error checks in the code, we record the first error
@@ -163,6 +177,18 @@ static int atusb_write_subreg(struct atusb *atusb, uint8_t reg, uint8_t mask,
 	return ret;
 }
 
+static int atusb_read_subreg(struct atusb *lp,
+			     unsigned int addr, unsigned int mask,
+			     unsigned int shift)
+{
+	int rc;
+
+	rc = atusb_read_reg(lp, addr);
+	rc = (rc & mask) >> shift;
+
+	return rc;
+}
+
 static int atusb_get_and_clear_error(struct atusb *atusb)
 {
 	int err = atusb->err;
@@ -379,18 +405,6 @@ static int atusb_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
 	return ret;
 }
 
-static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
-{
-	struct atusb *atusb = hw->priv;
-	int ret;
-
-	ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
-	if (ret < 0)
-		return ret;
-	msleep(1);	/* @@@ ugly synchronization */
-	return 0;
-}
-
 static int atusb_ed(struct ieee802154_hw *hw, u8 *level)
 {
 	BUG_ON(!level);
@@ -474,6 +488,17 @@ static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
 	-900, -1200, -1700,
 };
 
+static int
+atusb_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	struct atusb *atusb = hw->priv;
+
+	if (atusb->data)
+		return atusb->data->set_txpower(hw, mbm);
+	else
+		return -ENOTSUPP;
+}
+
 static int
 atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
 {
@@ -488,12 +513,43 @@ atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
 	return -EINVAL;
 }
 
+static int
+hulusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+	u32 i;
+
+	for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+		if (hw->phy->supported.tx_powers[i] == mbm)
+			return atusb_write_subreg(hw->priv, SR_TX_PWR_212, i);
+	}
+
+	return -EINVAL;
+}
+
 #define ATUSB_MAX_ED_LEVELS 0xF
 static const s32 atusb_ed_levels[ATUSB_MAX_ED_LEVELS + 1] = {
 	-9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
 	-7100, -6900, -6700, -6500, -6300, -6100,
 };
 
+#define AT86RF212_MAX_TX_POWERS 0x1F
+static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
+	500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
+	-800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
+	-1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
+};
+
+#define AT86RF2XX_MAX_ED_LEVELS 0xF
+static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
+	-8000, -7800, -7600, -7400, -7200, -7000,
+};
+
+static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
+	-9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
+	-7800, -7600, -7400, -7200, -7000, -6800,
+};
+
 static int
 atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
 {
@@ -527,6 +583,30 @@ atusb_set_cca_mode(struct ieee802154_hw *hw, const struct wpan_phy_cca *cca)
 	return atusb_write_subreg(atusb, SR_CCA_MODE, val);
 }
 
+static int hulusb_set_cca_ed_level(struct atusb *lp, int rssi_base_val)
+{
+	unsigned int cca_ed_thres;
+
+	cca_ed_thres = atusb_read_subreg(lp, SR_CCA_ED_THRES);
+
+	switch (rssi_base_val) {
+	case -98:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
+		break;
+	case -100:
+		lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
+		lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
 static int
 atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
 {
@@ -541,6 +621,92 @@ atusb_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
 	return -EINVAL;
 }
 
+static int atusb_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret = -ENOTSUPP;
+
+	if (atusb->data) {
+		ret = atusb->data->set_channel(hw, page, channel);
+		/* @@@ ugly synchronization */
+		msleep(atusb->data->t_channel_switch);
+	}
+
+	return ret;
+}
+
+static int atusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	struct atusb *atusb = hw->priv;
+	int ret;
+
+	ret = atusb_write_subreg(atusb, SR_CHANNEL, channel);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
+{
+	int rc;
+	int rssi_base_val;
+
+	struct atusb *lp = hw->priv;
+
+	if (channel == 0)
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 0);
+	else
+		rc = atusb_write_subreg(lp, SR_SUB_MODE, 1);
+	if (rc < 0)
+		return rc;
+
+	if (page == 0) {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 0);
+		rssi_base_val = -100;
+	} else {
+		rc = atusb_write_subreg(lp, SR_BPSK_QPSK, 1);
+		rssi_base_val = -98;
+	}
+	if (rc < 0)
+		return rc;
+
+	rc = hulusb_set_cca_ed_level(lp, rssi_base_val);
+	if (rc < 0)
+		return rc;
+
+	/* This sets the symbol_duration according frequency on the 212.
+	 * TODO move this handling while set channel and page in cfg802154.
+	 * We can do that, this timings are according 802.15.4 standard.
+	 * If we do that in cfg802154, this is a more generic calculation.
+	 *
+	 * This should also protected from ifs_timer. Means cancel timer and
+	 * init with a new value. For now, this is okay.
+	 */
+	if (channel == 0) {
+		if (page == 0) {
+			/* SUB:0 and BPSK:0 -> BPSK-20 */
+			lp->hw->phy->symbol_duration = 50;
+		} else {
+			/* SUB:1 and BPSK:0 -> BPSK-40 */
+			lp->hw->phy->symbol_duration = 25;
+		}
+	} else {
+		if (page == 0)
+			/* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
+			lp->hw->phy->symbol_duration = 40;
+		else
+			/* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
+			lp->hw->phy->symbol_duration = 16;
+	}
+
+	lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD *
+				   lp->hw->phy->symbol_duration;
+	lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD *
+				   lp->hw->phy->symbol_duration;
+
+	return atusb_write_subreg(lp, SR_CHANNEL, channel);
+}
+
 static int
 atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries)
 {
@@ -558,6 +724,14 @@ atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries
 	return atusb_write_subreg(atusb, SR_MAX_CSMA_RETRIES, retries);
 }
 
+static int
+hulusb_set_lbt(struct ieee802154_hw *hw, bool on)
+{
+	struct atusb *atusb = hw->priv;
+
+	return atusb_write_subreg(atusb, SR_CSMA_LBT_MODE, on);
+}
+
 static int
 atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
 {
@@ -593,6 +767,20 @@ atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
 	return 0;
 }
 
+struct atusb_chip_data atusb_chip_data = {
+	.t_channel_switch = 1,
+	.rssi_base_val = -91,
+	.set_txpower = atusb_set_txpower,
+	.set_channel = atusb_set_channel,
+};
+
+struct atusb_chip_data hulusb_chip_data = {
+	.t_channel_switch = 11,
+	.rssi_base_val = -100,
+	.set_txpower = hulusb_set_txpower,
+	.set_channel = hulusb_set_channel,
+};
+
 static const struct ieee802154_ops atusb_ops = {
 	.owner			= THIS_MODULE,
 	.xmit_async		= atusb_xmit,
@@ -601,7 +789,8 @@ static const struct ieee802154_ops atusb_ops = {
 	.start			= atusb_start,
 	.stop			= atusb_stop,
 	.set_hw_addr_filt	= atusb_set_hw_addr_filt,
-	.set_txpower		= atusb_set_txpower,
+	.set_txpower		= atusb_txpower,
+	.set_lbt		= hulusb_set_lbt,
 	.set_cca_mode		= atusb_set_cca_mode,
 	.set_cca_ed_level	= atusb_set_cca_ed_level,
 	.set_csma_params	= atusb_set_csma_params,
@@ -614,6 +803,7 @@ static const struct ieee802154_ops atusb_ops = {
 static int atusb_get_and_show_revision(struct atusb *atusb)
 {
 	struct usb_device *usb_dev = atusb->usb_dev;
+	char *hw_name;
 	unsigned char *buffer;
 	int ret;
 
@@ -630,9 +820,31 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
 		atusb->fw_ver_min = buffer[1];
 		atusb->fw_hw_type = buffer[2];
 
+		switch (atusb->fw_hw_type) {
+		case ATUSB_HW_TYPE_100813:
+		case ATUSB_HW_TYPE_101216:
+		case ATUSB_HW_TYPE_110131:
+			hw_name = "ATUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_RZUSB:
+			hw_name = "RZUSB";
+			atusb->data = &atusb_chip_data;
+			break;
+		case ATUSB_HW_TYPE_HULUSB:
+			hw_name = "HULUSB";
+			atusb->data = &hulusb_chip_data;
+			break;
+		default:
+			hw_name = "UNKNOWN";
+			atusb->err = -ENOTSUPP;
+			ret = -ENOTSUPP;
+			break;
+		}
+
 		dev_info(&usb_dev->dev,
-			 "Firmware: major: %u, minor: %u, hardware type: %u\n",
+			 "Firmware: major: %u, minor: %u, hardware type: %s (%d)\n",
-			 atusb->fw_ver_maj, atusb->fw_ver_min, atusb->fw_hw_type);
+			 atusb->fw_ver_maj, atusb->fw_ver_min, hw_name, atusb->fw_hw_type);
 	}
 	if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) {
 		dev_info(&usb_dev->dev,
@@ -667,11 +879,12 @@ static int atusb_get_and_show_build(struct atusb *atusb)
 	return ret;
 }
 
-static int atusb_get_and_show_chip(struct atusb *atusb)
+static int atusb_get_and_conf_chip(struct atusb *atusb)
 {
 	struct usb_device *usb_dev = atusb->usb_dev;
 	uint8_t man_id_0, man_id_1, part_num, version_num;
 	const char *chip;
+	struct ieee802154_hw *hw = atusb->hw;
 
 	man_id_0 = atusb_read_reg(atusb, RG_MAN_ID_0);
 	man_id_1 = atusb_read_reg(atusb, RG_MAN_ID_1);
@@ -681,6 +894,22 @@ static int atusb_get_and_show_chip(struct atusb *atusb)
 	if (atusb->err)
 		return atusb->err;
 
+	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
+		    IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
+
+	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
+			 WPAN_PHY_FLAG_CCA_MODE;
+
+	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
+				       BIT(NL802154_CCA_CARRIER) |
+				       BIT(NL802154_CCA_ENERGY_CARRIER);
+	hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
+				      BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
+
+	hw->phy->cca.mode = NL802154_CCA_ENERGY;
+
+	hw->phy->current_page = 0;
+
 	if ((man_id_1 << 8 | man_id_0) != ATUSB_JEDEC_ATMEL) {
 		dev_err(&usb_dev->dev,
 			"non-Atmel transceiver xxxx%02x%02x\n",
@@ -691,9 +920,36 @@ static int atusb_get_and_show_chip(struct atusb *atusb)
 	switch (part_num) {
 	case 2:
 		chip = "AT86RF230";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->symbol_duration = 16;
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
 		break;
 	case 3:
 		chip = "AT86RF231";
+		atusb->hw->phy->supported.channels[0] = 0x7FFF800;
+		atusb->hw->phy->current_channel = 11;	/* reset default */
+		atusb->hw->phy->symbol_duration = 16;
+		atusb->hw->phy->supported.tx_powers = atusb_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
+		hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
+		break;
+	case 7:
+		chip = "AT86RF212";
+		atusb->hw->flags |= IEEE802154_HW_LBT;
+		atusb->hw->phy->supported.channels[0] = 0x00007FF;
+		atusb->hw->phy->supported.channels[2] = 0x00007FF;
+		atusb->hw->phy->current_channel = 5;
+		atusb->hw->phy->symbol_duration = 25;
+		atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
+		atusb->hw->phy->supported.tx_powers = at86rf212_powers;
+		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
+		atusb->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
+		atusb->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
 		break;
 	default:
 		dev_err(&usb_dev->dev,
@@ -702,6 +958,9 @@ static int atusb_get_and_show_chip(struct atusb *atusb)
 		goto fail;
 	}
 
+	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
+	hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
+
 	dev_info(&usb_dev->dev, "ATUSB: %s version %d\n", chip, version_num);
 
 	return 0;
@@ -794,32 +1053,9 @@ static int atusb_probe(struct usb_interface *interface,
 		goto fail;
 
 	hw->parent = &usb_dev->dev;
-	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
-		    IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS;
-
-	hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL |
-			 WPAN_PHY_FLAG_CCA_MODE;
-
-	hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
-		BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
-	hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
-		BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
-
-	hw->phy->supported.cca_ed_levels = atusb_ed_levels;
-	hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(atusb_ed_levels);
-
-	hw->phy->cca.mode = NL802154_CCA_ENERGY;
-
-	hw->phy->current_page = 0;
-	hw->phy->current_channel = 11;	/* reset default */
-	hw->phy->supported.channels[0] = 0x7FFF800;
-	hw->phy->supported.tx_powers = atusb_powers;
-	hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
-	hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
-	hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7];
 
 	atusb_command(atusb, ATUSB_RF_RESET, 0);
-	atusb_get_and_show_chip(atusb);
+	atusb_get_and_conf_chip(atusb);
 	atusb_get_and_show_revision(atusb);
 	atusb_get_and_show_build(atusb);
 	atusb_set_extended_addr(atusb);
@@ -941,5 +1177,6 @@ MODULE_AUTHOR("Alexander Aring <alex.aring@gmail.com>");
 MODULE_AUTHOR("Richard Sharpe <realrichardsharpe@gmail.com>");
 MODULE_AUTHOR("Stefan Schmidt <stefan@datenfreihafen.org>");
 MODULE_AUTHOR("Werner Almesberger <werner@almesberger.net>");
+MODULE_AUTHOR("Josef Filzmaier <j.filzmaier@gmx.at>");
 MODULE_DESCRIPTION("ATUSB IEEE 802.15.4 Driver");
 MODULE_LICENSE("GPL");

drivers/net/ieee802154/atusb.h

@@ -50,6 +50,14 @@ enum atusb_requests {
 	ATUSB_EUI64_READ,
 };
 
+enum {
+	ATUSB_HW_TYPE_100813,	/* 2010-08-13 */
+	ATUSB_HW_TYPE_101216,	/* 2010-12-16 */
+	ATUSB_HW_TYPE_110131,	/* 2011-01-31, ATmega32U2-based */
+	ATUSB_HW_TYPE_RZUSB,	/* Atmel Raven USB dongle with at86rf230 */
+	ATUSB_HW_TYPE_HULUSB,	/* Busware HUL USB dongle with at86rf212 */
+};
+
 /*
  * Direction	bRequest		wValue		wIndex	wLength
  *

net/mac802154/llsec.c

@@ -623,13 +623,18 @@ llsec_do_encrypt_unauth(struct sk_buff *skb, const struct mac802154_llsec *sec,
 	u8 iv[16];
 	struct scatterlist src;
 	SKCIPHER_REQUEST_ON_STACK(req, key->tfm0);
-	int err;
+	int err, datalen;
+	unsigned char *data;
 
 	llsec_geniv(iv, sec->params.hwaddr, &hdr->sec);
-	sg_init_one(&src, skb->data, skb->len);
+	/* Compute data payload offset and data length */
+	data = skb_mac_header(skb) + skb->mac_len;
+	datalen = skb_tail_pointer(skb) - data;
+	sg_init_one(&src, data, datalen);
+
 	skcipher_request_set_tfm(req, key->tfm0);
 	skcipher_request_set_callback(req, 0, NULL, NULL);
-	skcipher_request_set_crypt(req, &src, &src, skb->len, iv);
+	skcipher_request_set_crypt(req, &src, &src, datalen, iv);
 	err = crypto_skcipher_encrypt(req);
 	skcipher_request_zero(req);
 	return err;
@@ -713,7 +718,8 @@ int mac802154_llsec_encrypt(struct mac802154_llsec *sec, struct sk_buff *skb)
 	if (hlen < 0 || hdr.fc.type != IEEE802154_FC_TYPE_DATA)
 		return -EINVAL;
 
-	if (!hdr.fc.security_enabled || hdr.sec.level == 0) {
+	if (!hdr.fc.security_enabled ||
+	    (hdr.sec.level == IEEE802154_SCF_SECLEVEL_NONE)) {
 		skb_push(skb, hlen);
 		return 0;
 	}