* fix ROC removal - avoids a firmware crash
 * fix throughput regression on iwldvm devices
 * fix panic in BT Coex
 * fixes in rate control
 * fixes in scan
 
 b43:
 
 * fix support for 5 GHz only BCM43228 model
 
 rtlwifi:
 
 * improve handling of IPv6 packets
 
 brcmfmac:
 
 * perform bound checking on vendor command buffer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJU/vcnAAoJEG4XJFUm622bBbMIAJAmmITit1LFbm5L5zguIkVq
 b9ppfEkgz6JYb4KMe6jWnvrc9yM3ywslH2Evo09ChA53A2sUhORKxlolreGTZxtQ
 je3twmUCyzkbvss+aKFS4BzEDDOGwW9A/wk3LT4TZJ7Jp626k1wPXN5WZHaDh0YC
 pE7fH6jnNg2Qoe68tG8WmTqrYlzU6mLpI0NNxsW+h2tK2Gqm7jSoMy96RPiwS0ZV
 BFnxrJJZViMyPit48pZf338pdndkxOIlDBIJCY8qUwQIt4HxQ8DnmsLWqg9xjnfT
 mSO9xgSJxfR02ZDIBYqaK41KlcharjwrF5lDi+JHkoHB2SQQM9A/noxpWu4/JGI=
 =pOSK
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-for-davem-2015-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

iwlwifi:

* fix ROC removal - avoids a firmware crash
* fix throughput regression on iwldvm devices
* fix panic in BT Coex
* fixes in rate control
* fixes in scan

b43:

* fix support for 5 GHz only BCM43228 model

rtlwifi:

* improve handling of IPv6 packets

brcmfmac:

* perform bound checking on vendor command buffer

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2015-03-10 13:43:02 -04:00
commit 3f39d6257b
13 changed files with 109 additions and 44 deletions

View File

@ -5370,6 +5370,7 @@ static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
case 0x432a: /* BCM4321 */
case 0x432d: /* BCM4322 */
case 0x4352: /* BCM43222 */
case 0x435a: /* BCM43228 */
case 0x4333: /* BCM4331 */
case 0x43a2: /* BCM4360 */
case 0x43b3: /* BCM4352 */

View File

@ -39,13 +39,22 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
void *dcmd_buf = NULL, *wr_pointer;
u16 msglen, maxmsglen = PAGE_SIZE - 0x100;
brcmf_dbg(TRACE, "cmd %x set %d len %d\n", cmdhdr->cmd, cmdhdr->set,
cmdhdr->len);
if (len < sizeof(*cmdhdr)) {
brcmf_err("vendor command too short: %d\n", len);
return -EINVAL;
}
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
ifp = vif->ifp;
len -= sizeof(struct brcmf_vndr_dcmd_hdr);
brcmf_dbg(TRACE, "ifidx=%d, cmd=%d\n", ifp->ifidx, cmdhdr->cmd);
if (cmdhdr->offset > len) {
brcmf_err("bad buffer offset %d > %d\n", cmdhdr->offset, len);
return -EINVAL;
}
len -= cmdhdr->offset;
ret_len = cmdhdr->len;
if (ret_len > 0 || len > 0) {
if (len > BRCMF_DCMD_MAXLEN) {

View File

@ -95,7 +95,8 @@ static const struct iwl_eeprom_params iwl1000_eeprom_params = {
.nvm_calib_ver = EEPROM_1000_TX_POWER_VERSION, \
.base_params = &iwl1000_base_params, \
.eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_BLINK
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl1000_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
@ -121,7 +122,8 @@ const struct iwl_cfg iwl1000_bg_cfg = {
.base_params = &iwl1000_base_params, \
.eeprom_params = &iwl1000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl100_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",

View File

@ -123,7 +123,9 @@ static const struct iwl_eeprom_params iwl20x0_eeprom_params = {
.nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2000_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl2000_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 2200 BGN",
@ -149,7 +151,8 @@ const struct iwl_cfg iwl2000_2bgn_d_cfg = {
.nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \
.base_params = &iwl2030_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl2030_2bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 2230 BGN",
@ -170,7 +173,8 @@ const struct iwl_cfg iwl2030_2bgn_cfg = {
.base_params = &iwl2000_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl105_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 105 BGN",
@ -197,7 +201,8 @@ const struct iwl_cfg iwl105_bgn_d_cfg = {
.base_params = &iwl2030_base_params, \
.eeprom_params = &iwl20x0_eeprom_params, \
.led_mode = IWL_LED_RF_STATE, \
.rx_with_siso_diversity = true
.rx_with_siso_diversity = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl135_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N 135 BGN",

View File

@ -93,7 +93,8 @@ static const struct iwl_eeprom_params iwl5000_eeprom_params = {
.nvm_calib_ver = EEPROM_5000_TX_POWER_VERSION, \
.base_params = &iwl5000_base_params, \
.eeprom_params = &iwl5000_eeprom_params, \
.led_mode = IWL_LED_BLINK
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl5300_agn_cfg = {
.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
@ -158,7 +159,8 @@ const struct iwl_cfg iwl5350_agn_cfg = {
.base_params = &iwl5000_base_params, \
.eeprom_params = &iwl5000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl5150_agn_cfg = {
.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",

View File

@ -145,7 +145,8 @@ static const struct iwl_eeprom_params iwl6000_eeprom_params = {
.nvm_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6005_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
@ -199,7 +200,8 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6030_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
@ -235,7 +237,8 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_RF_STATE
.led_mode = IWL_LED_RF_STATE, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
@ -290,7 +293,8 @@ const struct iwl_cfg iwl130_bg_cfg = {
.nvm_calib_ver = EEPROM_6000_TX_POWER_VERSION, \
.base_params = &iwl6000_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK
.led_mode = IWL_LED_BLINK, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
@ -322,7 +326,8 @@ const struct iwl_cfg iwl6000i_2bg_cfg = {
.base_params = &iwl6050_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6050_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
@ -347,7 +352,8 @@ const struct iwl_cfg iwl6050_2abg_cfg = {
.base_params = &iwl6050_base_params, \
.eeprom_params = &iwl6000_eeprom_params, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
.internal_wimax_coex = true, \
.max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K
const struct iwl_cfg iwl6150_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",

View File

@ -793,7 +793,8 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
if (!vif->bss_conf.assoc)
smps_mode = IEEE80211_SMPS_AUTOMATIC;
if (IWL_COEX_IS_RRC_ON(mvm->last_bt_notif.ttc_rrc_status,
if (mvmvif->phy_ctxt &&
IWL_COEX_IS_RRC_ON(mvm->last_bt_notif.ttc_rrc_status,
mvmvif->phy_ctxt->id))
smps_mode = IEEE80211_SMPS_AUTOMATIC;

View File

@ -832,7 +832,8 @@ static void iwl_mvm_bt_notif_iterator(void *_data, u8 *mac,
if (!vif->bss_conf.assoc)
smps_mode = IEEE80211_SMPS_AUTOMATIC;
if (data->notif->rrc_enabled & BIT(mvmvif->phy_ctxt->id))
if (mvmvif->phy_ctxt &&
data->notif->rrc_enabled & BIT(mvmvif->phy_ctxt->id))
smps_mode = IEEE80211_SMPS_AUTOMATIC;
IWL_DEBUG_COEX(data->mvm,

View File

@ -405,7 +405,10 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
if (mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_BEAMFORMER)
if ((mvm->fw->ucode_capa.capa[0] &
IWL_UCODE_TLV_CAPA_BEAMFORMER) &&
(mvm->fw->ucode_capa.api[0] &
IWL_UCODE_TLV_API_LQ_SS_PARAMS))
hw->wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap.cap |=
IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
}
@ -2215,7 +2218,19 @@ static void iwl_mvm_mac_cancel_hw_scan(struct ieee80211_hw *hw,
mutex_lock(&mvm->mutex);
iwl_mvm_cancel_scan(mvm);
/* Due to a race condition, it's possible that mac80211 asks
* us to stop a hw_scan when it's already stopped. This can
* happen, for instance, if we stopped the scan ourselves,
* called ieee80211_scan_completed() and the userspace called
* cancel scan scan before ieee80211_scan_work() could run.
* To handle that, simply return if the scan is not running.
*/
/* FIXME: for now, we ignore this race for UMAC scans, since
* they don't set the scan_status.
*/
if ((mvm->scan_status == IWL_MVM_SCAN_OS) ||
(mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN))
iwl_mvm_cancel_scan(mvm);
mutex_unlock(&mvm->mutex);
}
@ -2559,12 +2574,29 @@ static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw,
int ret;
mutex_lock(&mvm->mutex);
/* Due to a race condition, it's possible that mac80211 asks
* us to stop a sched_scan when it's already stopped. This
* can happen, for instance, if we stopped the scan ourselves,
* called ieee80211_sched_scan_stopped() and the userspace called
* stop sched scan scan before ieee80211_sched_scan_stopped_work()
* could run. To handle this, simply return if the scan is
* not running.
*/
/* FIXME: for now, we ignore this race for UMAC scans, since
* they don't set the scan_status.
*/
if (mvm->scan_status != IWL_MVM_SCAN_SCHED &&
!(mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_UMAC_SCAN)) {
mutex_unlock(&mvm->mutex);
return 0;
}
ret = iwl_mvm_scan_offload_stop(mvm, false);
mutex_unlock(&mvm->mutex);
iwl_mvm_wait_for_async_handlers(mvm);
return ret;
}
static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw,

View File

@ -134,9 +134,12 @@ enum rs_column_mode {
#define MAX_NEXT_COLUMNS 7
#define MAX_COLUMN_CHECKS 3
struct rs_tx_column;
typedef bool (*allow_column_func_t) (struct iwl_mvm *mvm,
struct ieee80211_sta *sta,
struct iwl_scale_tbl_info *tbl);
struct iwl_scale_tbl_info *tbl,
const struct rs_tx_column *next_col);
struct rs_tx_column {
enum rs_column_mode mode;
@ -147,13 +150,15 @@ struct rs_tx_column {
};
static bool rs_ant_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
struct iwl_scale_tbl_info *tbl)
struct iwl_scale_tbl_info *tbl,
const struct rs_tx_column *next_col)
{
return iwl_mvm_bt_coex_is_ant_avail(mvm, tbl->rate.ant);
return iwl_mvm_bt_coex_is_ant_avail(mvm, next_col->ant);
}
static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
struct iwl_scale_tbl_info *tbl)
struct iwl_scale_tbl_info *tbl,
const struct rs_tx_column *next_col)
{
if (!sta->ht_cap.ht_supported)
return false;
@ -171,7 +176,8 @@ static bool rs_mimo_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
}
static bool rs_siso_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
struct iwl_scale_tbl_info *tbl)
struct iwl_scale_tbl_info *tbl,
const struct rs_tx_column *next_col)
{
if (!sta->ht_cap.ht_supported)
return false;
@ -180,7 +186,8 @@ static bool rs_siso_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
}
static bool rs_sgi_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
struct iwl_scale_tbl_info *tbl)
struct iwl_scale_tbl_info *tbl,
const struct rs_tx_column *next_col)
{
struct rs_rate *rate = &tbl->rate;
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
@ -1590,7 +1597,7 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
for (j = 0; j < MAX_COLUMN_CHECKS; j++) {
allow_func = next_col->checks[j];
if (allow_func && !allow_func(mvm, sta, tbl))
if (allow_func && !allow_func(mvm, sta, tbl, next_col))
break;
}

View File

@ -1128,8 +1128,10 @@ int iwl_mvm_scan_offload_stop(struct iwl_mvm *mvm, bool notify)
if (mvm->scan_status == IWL_MVM_SCAN_NONE)
return 0;
if (iwl_mvm_is_radio_killed(mvm))
if (iwl_mvm_is_radio_killed(mvm)) {
ret = 0;
goto out;
}
if (mvm->scan_status != IWL_MVM_SCAN_SCHED &&
(!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN) ||
@ -1148,16 +1150,14 @@ int iwl_mvm_scan_offload_stop(struct iwl_mvm *mvm, bool notify)
IWL_DEBUG_SCAN(mvm, "Send stop %sscan failed %d\n",
sched ? "offloaded " : "", ret);
iwl_remove_notification(&mvm->notif_wait, &wait_scan_done);
return ret;
goto out;
}
IWL_DEBUG_SCAN(mvm, "Successfully sent stop %sscan\n",
sched ? "offloaded " : "");
ret = iwl_wait_notification(&mvm->notif_wait, &wait_scan_done, 1 * HZ);
if (ret)
return ret;
out:
/*
* Clear the scan status so the next scan requests will succeed. This
* also ensures the Rx handler doesn't do anything, as the scan was
@ -1167,7 +1167,6 @@ int iwl_mvm_scan_offload_stop(struct iwl_mvm *mvm, bool notify)
if (mvm->scan_status == IWL_MVM_SCAN_OS)
iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
out:
mvm->scan_status = IWL_MVM_SCAN_NONE;
if (notify) {
@ -1177,7 +1176,7 @@ out:
ieee80211_scan_completed(mvm->hw, true);
}
return 0;
return ret;
}
static void iwl_mvm_unified_scan_fill_tx_cmd(struct iwl_mvm *mvm,

View File

@ -750,8 +750,7 @@ void iwl_mvm_stop_roc(struct iwl_mvm *mvm)
* request
*/
list_for_each_entry(te_data, &mvm->time_event_list, list) {
if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE &&
te_data->running) {
if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) {
mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif);
is_p2p = true;
goto remove_te;
@ -766,10 +765,8 @@ void iwl_mvm_stop_roc(struct iwl_mvm *mvm)
* request
*/
list_for_each_entry(te_data, &mvm->aux_roc_te_list, list) {
if (te_data->running) {
mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif);
goto remove_te;
}
mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif);
goto remove_te;
}
remove_te:

View File

@ -1386,8 +1386,11 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
}
return true;
} else if (0x86DD == ether_type) {
return true;
} else if (ETH_P_IPV6 == ether_type) {
/* TODO: Handle any IPv6 cases that need special handling.
* For now, always return false
*/
goto end;
}
end: