From 3efc93c2bc243f940beb3324f67aa14e223abdd1 Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Fri, 13 Oct 2017 13:39:22 -0400 Subject: [PATCH] net: dsa: mv88e6060: fix switch MAC address The 88E6060 Ethernet switch always transmits the multicast bit of the switch MAC address as a zero. It re-uses the corresponding bit 8 of the register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr". If the "DiffAddr" bit is 0, then all ports transmit the same source address. If it is set to 1, then bit 2:0 are used for the port number. The mv88e6060 driver is currently wrongly shifting the MAC address byte 0 by 9. To fix this, shift it by 8 as usual and clear its bit 0. Signed-off-by: Vivien Didelot Reviewed-by: Woojung Huh Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6060.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c index dce7fa57eb55..f123ed57630d 100644 --- a/drivers/net/dsa/mv88e6060.c +++ b/drivers/net/dsa/mv88e6060.c @@ -214,8 +214,14 @@ static int mv88e6060_setup(struct dsa_switch *ds) static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr) { - /* Use the same MAC Address as FD Pause frames for all ports */ - REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, (addr[0] << 9) | addr[1]); + u16 val = addr[0] << 8 | addr[1]; + + /* The multicast bit is always transmitted as a zero, so the switch uses + * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA. + */ + val &= 0xfeff; + + REG_WRITE(REG_GLOBAL, GLOBAL_MAC_01, val); REG_WRITE(REG_GLOBAL, GLOBAL_MAC_23, (addr[2] << 8) | addr[3]); REG_WRITE(REG_GLOBAL, GLOBAL_MAC_45, (addr[4] << 8) | addr[5]);