Input: add Zhen Hua driver
This is a driver for Zhen Hua PPM-4CH RC transmitter (commonly used in cheap Ready To Fly RC helicopters by Walkera) which using "Zhen Hua 5-byte protocol" for using them as a four axis joystick via serial port. Transmitter connected to serial port (19200 8N1) sending periodically 5 bytes where first byte is for synchronization and next four bytes are values of axis. Signed-off-by: Martin Kebert <gkmarty@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Martin Kebert
Dmitry Torokhov
parent
a32bcc45b9
commit
3e24e2b5ae
|
|
@ -193,6 +193,18 @@ config JOYSTICK_TWIDJOY
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called twidjoy.
|
||||
|
||||
config JOYSTICK_ZHENHUA
|
||||
tristate "5-byte Zhenhua RC transmitter"
|
||||
select SERIO
|
||||
help
|
||||
Say Y here if you have a Zhen Hua PPM-4CH transmitter which is
|
||||
supplied with a ready to fly micro electric indoor helicopters
|
||||
such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want
|
||||
to use it via serial cable as a joystick.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called zhenhua.
|
||||
|
||||
config JOYSTICK_DB9
|
||||
tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
|
||||
depends on PARPORT
|
||||
|
|
|
|||
|
|
@ -27,5 +27,6 @@ obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
|
|||
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
|
||||
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
|
||||
obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
|
||||
obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
|
||||
|
||||
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,243 @@
|
|||
/*
|
||||
* derived from "twidjoy.c"
|
||||
*
|
||||
* Copyright (c) 2008 Martin Kebert
|
||||
* Copyright (c) 2001 Arndt Schoenewald
|
||||
* Copyright (c) 2000-2001 Vojtech Pavlik
|
||||
* Copyright (c) 2000 Mark Fletcher
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
|
||||
* EasyCopter etc.) as a joystick under Linux.
|
||||
*
|
||||
* RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
|
||||
* transmitters for control a RC planes or RC helicopters with possibility to
|
||||
* connect on a serial port.
|
||||
* Data coming from transmitter is in this order:
|
||||
* 1. byte = synchronisation byte
|
||||
* 2. byte = X axis
|
||||
* 3. byte = Y axis
|
||||
* 4. byte = RZ axis
|
||||
* 5. byte = Z axis
|
||||
* (and this is repeated)
|
||||
*
|
||||
* For questions or feedback regarding this driver module please contact:
|
||||
* Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
|
||||
* coder :-(
|
||||
*/
|
||||
|
||||
/*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/serio.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#define DRIVER_DESC "RC transmitter with 5-byte Zhen Hua protocol joystick driver"
|
||||
|
||||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
/*
|
||||
* Constants.
|
||||
*/
|
||||
|
||||
#define ZHENHUA_MAX_LENGTH 5
|
||||
|
||||
/*
|
||||
* Zhen Hua data.
|
||||
*/
|
||||
|
||||
struct zhenhua {
|
||||
struct input_dev *dev;
|
||||
int idx;
|
||||
unsigned char data[ZHENHUA_MAX_LENGTH];
|
||||
char phys[32];
|
||||
};
|
||||
|
||||
|
||||
/* bits in all incoming bytes needs to be "reversed" */
|
||||
static int zhenhua_bitreverse(int x)
|
||||
{
|
||||
x = ((x & 0xaa) >> 1) | ((x & 0x55) << 1);
|
||||
x = ((x & 0xcc) >> 2) | ((x & 0x33) << 2);
|
||||
x = ((x & 0xf0) >> 4) | ((x & 0x0f) << 4);
|
||||
return x;
|
||||
}
|
||||
|
||||
/*
|
||||
* zhenhua_process_packet() decodes packets the driver receives from the
|
||||
* RC transmitter. It updates the data accordingly.
|
||||
*/
|
||||
|
||||
static void zhenhua_process_packet(struct zhenhua *zhenhua)
|
||||
{
|
||||
struct input_dev *dev = zhenhua->dev;
|
||||
unsigned char *data = zhenhua->data;
|
||||
|
||||
input_report_abs(dev, ABS_Y, data[1]);
|
||||
input_report_abs(dev, ABS_X, data[2]);
|
||||
input_report_abs(dev, ABS_RZ, data[3]);
|
||||
input_report_abs(dev, ABS_Z, data[4]);
|
||||
|
||||
input_sync(dev);
|
||||
}
|
||||
|
||||
/*
|
||||
* zhenhua_interrupt() is called by the low level driver when characters
|
||||
* are ready for us. We then buffer them for further processing, or call the
|
||||
* packet processing routine.
|
||||
*/
|
||||
|
||||
static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
|
||||
{
|
||||
struct zhenhua *zhenhua = serio_get_drvdata(serio);
|
||||
|
||||
/* All Zhen Hua packets are 5 bytes. The fact that the first byte
|
||||
* is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
|
||||
* can be used to check and regain sync. */
|
||||
|
||||
if (data == 0xef)
|
||||
zhenhua->idx = 0; /* this byte starts a new packet */
|
||||
else if (zhenhua->idx == 0)
|
||||
return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
|
||||
|
||||
if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
|
||||
zhenhua->data[zhenhua->idx++] = zhenhua_bitreverse(data);
|
||||
|
||||
if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
|
||||
zhenhua_process_packet(zhenhua);
|
||||
zhenhua->idx = 0;
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*
|
||||
* zhenhua_disconnect() is the opposite of zhenhua_connect()
|
||||
*/
|
||||
|
||||
static void zhenhua_disconnect(struct serio *serio)
|
||||
{
|
||||
struct zhenhua *zhenhua = serio_get_drvdata(serio);
|
||||
|
||||
serio_close(serio);
|
||||
serio_set_drvdata(serio, NULL);
|
||||
input_unregister_device(zhenhua->dev);
|
||||
kfree(zhenhua);
|
||||
}
|
||||
|
||||
/*
|
||||
* zhenhua_connect() is the routine that is called when someone adds a
|
||||
* new serio device. It looks for the Twiddler, and if found, registers
|
||||
* it as an input device.
|
||||
*/
|
||||
|
||||
static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
|
||||
{
|
||||
struct zhenhua *zhenhua;
|
||||
struct input_dev *input_dev;
|
||||
int err = -ENOMEM;
|
||||
|
||||
zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
|
||||
input_dev = input_allocate_device();
|
||||
if (!zhenhua || !input_dev)
|
||||
goto fail1;
|
||||
|
||||
zhenhua->dev = input_dev;
|
||||
snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);
|
||||
|
||||
input_dev->name = "Zhen Hua 5-byte device";
|
||||
input_dev->phys = zhenhua->phys;
|
||||
input_dev->id.bustype = BUS_RS232;
|
||||
input_dev->id.vendor = SERIO_ZHENHUA;
|
||||
input_dev->id.product = 0x0001;
|
||||
input_dev->id.version = 0x0100;
|
||||
input_dev->dev.parent = &serio->dev;
|
||||
|
||||
input_dev->evbit[0] = BIT(EV_ABS);
|
||||
input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
|
||||
input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
|
||||
input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
|
||||
input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);
|
||||
|
||||
serio_set_drvdata(serio, zhenhua);
|
||||
|
||||
err = serio_open(serio, drv);
|
||||
if (err)
|
||||
goto fail2;
|
||||
|
||||
err = input_register_device(zhenhua->dev);
|
||||
if (err)
|
||||
goto fail3;
|
||||
|
||||
return 0;
|
||||
|
||||
fail3: serio_close(serio);
|
||||
fail2: serio_set_drvdata(serio, NULL);
|
||||
fail1: input_free_device(input_dev);
|
||||
kfree(zhenhua);
|
||||
return err;
|
||||
}
|
||||
|
||||
/*
|
||||
* The serio driver structure.
|
||||
*/
|
||||
|
||||
static struct serio_device_id zhenhua_serio_ids[] = {
|
||||
{
|
||||
.type = SERIO_RS232,
|
||||
.proto = SERIO_ZHENHUA,
|
||||
.id = SERIO_ANY,
|
||||
.extra = SERIO_ANY,
|
||||
},
|
||||
{ 0 }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);
|
||||
|
||||
static struct serio_driver zhenhua_drv = {
|
||||
.driver = {
|
||||
.name = "zhenhua",
|
||||
},
|
||||
.description = DRIVER_DESC,
|
||||
.id_table = zhenhua_serio_ids,
|
||||
.interrupt = zhenhua_interrupt,
|
||||
.connect = zhenhua_connect,
|
||||
.disconnect = zhenhua_disconnect,
|
||||
};
|
||||
|
||||
/*
|
||||
* The functions for inserting/removing us as a module.
|
||||
*/
|
||||
|
||||
static int __init zhenhua_init(void)
|
||||
{
|
||||
return serio_register_driver(&zhenhua_drv);
|
||||
}
|
||||
|
||||
static void __exit zhenhua_exit(void)
|
||||
{
|
||||
serio_unregister_driver(&zhenhua_drv);
|
||||
}
|
||||
|
||||
module_init(zhenhua_init);
|
||||
module_exit(zhenhua_exit);
|
||||
|
|
@ -211,5 +211,6 @@ static inline void serio_unpin_driver(struct serio *serio)
|
|||
#define SERIO_TOUCHWIN 0x33
|
||||
#define SERIO_TAOSEVM 0x34
|
||||
#define SERIO_FUJITSU 0x35
|
||||
#define SERIO_ZHENHUA 0x36
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue