diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 5aa472892465..76c4855a03bc 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -194,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = { 0x3, /* IRQ out, active high, CMOS */ }, .ldo = { - { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, }, - { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, }, + { .init_data = &wm8994_ldo1, }, + { .init_data = &wm8994_ldo2, }, }, }; @@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = { { I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */ .platform_data = &wm8994_pdata, .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + .dev_name = "wm8958", + }, +}; + +static struct gpiod_lookup_table wm8994_gpiod_table = { + .dev_id = "i2c-wm8958", /* I2C device name */ + .table = { + GPIO_LOOKUP("GPION", 6, + "wlf,ldo1ena", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("GPION", 4, + "wlf,ldo2ena", GPIO_ACTIVE_HIGH), + { }, }, }; @@ -381,6 +393,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c, gpiod_add_lookup_table(&wm5102_reva_gpiod_table); gpiod_add_lookup_table(&wm5102_gpiod_table); + gpiod_add_lookup_table(&wm8994_gpiod_table); if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 953d0790ffd5..c409464231f6 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -302,14 +301,6 @@ static int wm8994_set_pdata_from_of(struct wm8994 *wm8994) if (of_find_property(np, "wlf,ldoena-always-driven", NULL)) pdata->lineout2fb = true; - pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0); - if (pdata->ldo[0].enable < 0) - pdata->ldo[0].enable = 0; - - pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0); - if (pdata->ldo[1].enable < 0) - pdata->ldo[1].enable = 0; - return 0; } #else diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c index 7a4ce6df4f22..d3a5f48119c2 100644 --- a/drivers/regulator/wm8994-regulator.c +++ b/drivers/regulator/wm8994-regulator.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include @@ -129,6 +129,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev) int id = pdev->id % ARRAY_SIZE(pdata->ldo); struct regulator_config config = { }; struct wm8994_ldo *ldo; + struct gpio_desc *gpiod; int ret; dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1); @@ -145,12 +146,14 @@ static int wm8994_ldo_probe(struct platform_device *pdev) config.driver_data = ldo; config.regmap = wm8994->regmap; config.init_data = &ldo->init_data; - if (pdata) { - config.ena_gpio = pdata->ldo[id].enable; - } else if (wm8994->dev->of_node) { - config.ena_gpio = wm8994->pdata.ldo[id].enable; - config.ena_gpio_initialized = true; - } + + /* Look up LDO enable GPIO from the parent device node */ + gpiod = devm_gpiod_get_optional(pdev->dev.parent, + id ? "wlf,ldo2ena" : "wlf,ldo1ena", + GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + config.ena_gpiod = gpiod; /* Use default constraints if none set up */ if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) { @@ -159,7 +162,7 @@ static int wm8994_ldo_probe(struct platform_device *pdev) ldo->init_data = wm8994_ldo_default[id]; ldo->init_data.consumer_supplies = &ldo->supply; - if (!config.ena_gpio) + if (!gpiod) ldo->init_data.constraints.valid_ops_mask = 0; } else { ldo->init_data = *pdata->ldo[id].init_data; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 90c60524a496..fca67bd194e2 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -20,9 +20,6 @@ #define WM8994_NUM_AIF 3 struct wm8994_ldo_pdata { - /** GPIOs to enable regulator, 0 or less if not available */ - int enable; - const struct regulator_init_data *init_data; };