ASoC: Updates for v5.7

This is a very big update for the core since Morimoto-san has been rather busy continuing his refactorings to clean up a lot of the cruft that we have accumilated over the years. We've also gained several new drivers, including initial (but still not complete) parts of the Intel SoundWire support. - Lots of refactorings to modernize the code from Morimoto-san. - Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven. - Continued refactoring and fixing of the Intel support. - Soundwire and more advanced clocking support for Realtek RT5682. - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140. -----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6B03sTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0Jm5B/4pb6Hz1ifM+ikR4qB7BOdm/UGzxWlD Mng+qN3kh6Tx+x8/xnQRmfOnhFoKnDSTnlxcDr6ujAtz3bH+CKXbo2jjfvmagQrW j87tYGdh6T38E6mf6543Eth3zJGphZYUY70REXt0HsaQ8bA912nrs5H8LTFiD2i+ lBJd/MmlCYL3gb/ftN9dpTfYYdxLy9HH9j5tR5zpLN3AD3Hew9jHqqX+ioAk+6lA Nisbx5grP10pWFklYXyJlUFQOqMOYMtPMblLRA9bjqcEtL3quIXPXKkPNtTh+0Kf 5t7Q39RtVXJAk0DcatjMJUGAGQyM9r5g1Nk8WLB1LLv+NfLcO6cUpLAc =+z/q -----END PGP SIGNATURE----- Merge tag 'asoc-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.7 This is a very big update for the core since Morimoto-san has been rather busy continuing his refactorings to clean up a lot of the cruft that we have accumilated over the years. We've also gained several new drivers, including initial (but still not complete) parts of the Intel SoundWire support. - Lots of refactorings to modernize the code from Morimoto-san. - Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven. - Continued refactoring and fixing of the Intel support. - Soundwire and more advanced clocking support for Realtek RT5682. - Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and TLV320ADCX140.
2020-03-30 13:43:00 +02:00 · 2020-03-30 13:43:00 +02:00 · 3c22baeab4
parent aa21c3d4b9 1c521d7e62
commit 3c22baeab4
1917 changed files with 39331 additions and 17486 deletions
--- a/.clang-format
+++ b/.clang-format
@ -86,6 +86,8 @@ ForEachMacros:
  - 'bio_for_each_segment_all'
  - 'bio_list_for_each'
  - 'bip_for_each_vec'
+  - 'bitmap_for_each_clear_region'
+  - 'bitmap_for_each_set_region'
  - 'blkg_for_each_descendant_post'
  - 'blkg_for_each_descendant_pre'
  - 'blk_queue_for_each_rl'
@ -115,6 +117,7 @@ ForEachMacros:
  - 'drm_client_for_each_connector_iter'
  - 'drm_client_for_each_modeset'
  - 'drm_connector_for_each_possible_encoder'
+  - 'drm_for_each_bridge_in_chain'
  - 'drm_for_each_connector_iter'
  - 'drm_for_each_crtc'
  - 'drm_for_each_encoder'
@ -136,9 +139,10 @@ ForEachMacros:
  - 'for_each_bio'
  - 'for_each_board_func_rsrc'
  - 'for_each_bvec'
+  - 'for_each_card_auxs'
+  - 'for_each_card_auxs_safe'
  - 'for_each_card_components'
-  - 'for_each_card_links'
-  - 'for_each_card_links_safe'
+  - 'for_each_card_pre_auxs'
  - 'for_each_card_prelinks'
  - 'for_each_card_rtds'
  - 'for_each_card_rtds_safe'
@ -166,6 +170,7 @@ ForEachMacros:
  - 'for_each_dpcm_fe'
  - 'for_each_drhd_unit'
  - 'for_each_dss_dev'
+  - 'for_each_efi_handle'
  - 'for_each_efi_memory_desc'
  - 'for_each_efi_memory_desc_in_map'
  - 'for_each_element'
@ -190,6 +195,7 @@ ForEachMacros:
  - 'for_each_lru'
  - 'for_each_matching_node'
  - 'for_each_matching_node_and_match'
+  - 'for_each_member'
  - 'for_each_memblock'
  - 'for_each_memblock_type'
  - 'for_each_memcg_cache_index'
@ -200,9 +206,11 @@ ForEachMacros:
  - 'for_each_msi_entry'
  - 'for_each_msi_entry_safe'
  - 'for_each_net'
+  - 'for_each_net_continue_reverse'
  - 'for_each_netdev'
  - 'for_each_netdev_continue'
  - 'for_each_netdev_continue_rcu'
+  - 'for_each_netdev_continue_reverse'
  - 'for_each_netdev_feature'
  - 'for_each_netdev_in_bond_rcu'
  - 'for_each_netdev_rcu'
@ -254,10 +262,10 @@ ForEachMacros:
  - 'for_each_reserved_mem_region'
  - 'for_each_rtd_codec_dai'
  - 'for_each_rtd_codec_dai_rollback'
-  - 'for_each_rtdcom'
-  - 'for_each_rtdcom_safe'
+  - 'for_each_rtd_components'
  - 'for_each_set_bit'
  - 'for_each_set_bit_from'
+  - 'for_each_set_clump8'
  - 'for_each_sg'
  - 'for_each_sg_dma_page'
  - 'for_each_sg_page'
@ -267,6 +275,7 @@ ForEachMacros:
  - 'for_each_subelement_id'
  - '__for_each_thread'
  - 'for_each_thread'
+  - 'for_each_wakeup_source'
  - 'for_each_zone'
  - 'for_each_zone_zonelist'
  - 'for_each_zone_zonelist_nodemask'
@ -330,6 +339,7 @@ ForEachMacros:
  - 'list_for_each'
  - 'list_for_each_codec'
  - 'list_for_each_codec_safe'
+  - 'list_for_each_continue'
  - 'list_for_each_entry'
  - 'list_for_each_entry_continue'
  - 'list_for_each_entry_continue_rcu'
@ -351,6 +361,7 @@ ForEachMacros:
  - 'llist_for_each_entry'
  - 'llist_for_each_entry_safe'
  - 'llist_for_each_safe'
+  - 'mci_for_each_dimm'
  - 'media_device_for_each_entity'
  - 'media_device_for_each_intf'
  - 'media_device_for_each_link'
@ -444,10 +455,16 @@ ForEachMacros:
  - 'virtio_device_for_each_vq'
  - 'xa_for_each'
  - 'xa_for_each_marked'
+  - 'xa_for_each_range'
  - 'xa_for_each_start'
  - 'xas_for_each'
  - 'xas_for_each_conflict'
  - 'xas_for_each_marked'
+  - 'xbc_array_for_each_value'
+  - 'xbc_for_each_key_value'
+  - 'xbc_node_for_each_array_value'
+  - 'xbc_node_for_each_child'
+  - 'xbc_node_for_each_key_value'
  - 'zorro_for_each_dev'

 #IncludeBlocks: Preserve # Unknown to clang-format-5.0
--- a/2
+++ b/2
@ -16,3 +16,5 @@ In addition, other licenses may also apply. Please see:
 	Documentation/process/license-rules.rst

 for more details.
+
+All contributions to the Linux Kernel are subject to this COPYING file.
--- a/5
+++ b/5
@ -567,6 +567,11 @@ D: Original author of Amiga FFS filesystem
 S: Orlando, Florida
 S: USA

+N: Paul Burton
+E: paulburton@kernel.org
+W: https://pburton.com
+D: MIPS maintainer 2018-2020
+
 N: Lennert Buytenhek
 E: kernel@wantstofly.org
 D: Original (2.4) rewrite of the ethernet bridging code
--- a/Documentation/admin-guide/acpi/fan_performance_states.rst
+++ b/Documentation/admin-guide/acpi/fan_performance_states.rst
@ -18,7 +18,7 @@ may look as follows::

 $ ls -l /sys/bus/acpi/devices/INT3404:00/
 total 0
-...
+ ...
 -r--r--r-- 1 root root 4096 Dec 13 20:38 state0
 -r--r--r-- 1 root root 4096 Dec 13 20:38 state1
 -r--r--r-- 1 root root 4096 Dec 13 20:38 state10
@ -38,7 +38,7 @@ where each of the "state*" files represents one performance state of the fan
 and contains a colon-separated list of 5 integer numbers (fields) with the
 following interpretation::

-control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw
+  control_percent:trip_point_index:speed_rpm:noise_level_mdb:power_mw

 * ``control_percent``: The percent value to be used to set the fan speed to a
  specific level using the _FSL object (0-100).
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@ -62,6 +62,30 @@ Or more shorter, written as following::
 In both styles, same key words are automatically merged when parsing it
 at boot time. So you can append similar trees or key-values.

+Same-key Values
+---------------
+
+It is prohibited that two or more values or arrays share a same-key.
+For example,::
+
+ foo = bar, baz
+ foo = qux  # !ERROR! we can not re-define same key
+
+If you want to append the value to existing key as an array member,
+you can use ``+=`` operator. For example::
+
+ foo = bar, baz
+ foo += qux
+
+In this case, the key ``foo`` has ``bar``, ``baz`` and ``qux``.
+
+However, a sub-key and a value can not co-exist under a parent key.
+For example, following config is NOT allowed.::
+
+ foo = value1
+ foo.bar = value2 # !ERROR! subkey "bar" and value "value1" can NOT co-exist
+
+
 Comments
 --------

@ -102,9 +126,13 @@ Boot Kernel With a Boot Config
 ==============================

 Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file. The Linux kernel decodes
-the last part of the initrd image in memory to get the boot configuration
-data.
+to the end of the initrd (initramfs) image file with size, checksum and
+12-byte magic word as below.
+
+[initrd][bootconfig][size(u32)][checksum(u32)][#BOOTCONFIG\n]
+
+The Linux kernel decodes the last part of the initrd image in memory to
+get the boot configuration data.
 Because of this "piggyback" method, there is no need to change or
 update the boot loader and the kernel image itself.

--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -136,6 +136,10 @@
 			dynamic table installation which will install SSDT
 			tables to /sys/firmware/acpi/tables/dynamic.

+	acpi_no_watchdog	[HW,ACPI,WDT]
+			Ignore the ACPI-based watchdog interface (WDAT) and let
+			a native driver control the watchdog device instead.
+
 	acpi_rsdp=	[ACPI,EFI,KEXEC]
 			Pass the RSDP address to the kernel, mostly used
 			on machines running EFI runtime service to boot the
--- a/Documentation/arm64/memory.rst
+++ b/Documentation/arm64/memory.rst
@ -129,7 +129,7 @@ this logic.

 As a single binary will need to support both 48-bit and 52-bit VA
 spaces, the VMEMMAP must be sized large enough for 52-bit VAs and
-also must be sized large enought to accommodate a fixed PAGE_OFFSET.
+also must be sized large enough to accommodate a fixed PAGE_OFFSET.

 Most code in the kernel should not need to consider the VA_BITS, for
 code that does need to know the VA size the variables are
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@ -110,6 +110,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154        |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX GICv3  | #38539          | N/A                         |
+----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456        |
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX Core   | #30115          | CAVIUM_ERRATUM_30115        |
--- a/Documentation/arm64/tagged-address-abi.rst
+++ b/Documentation/arm64/tagged-address-abi.rst
@ -44,8 +44,15 @@ The AArch64 Tagged Address ABI has two stages of relaxation depending
 how the user addresses are used by the kernel:

 1. User addresses not accessed by the kernel but used for address space
-   management (e.g. ``mmap()``, ``mprotect()``, ``madvise()``). The use
-   of valid tagged pointers in this context is always allowed.
+   management (e.g. ``mprotect()``, ``madvise()``). The use of valid
+   tagged pointers in this context is allowed with the exception of
+   ``brk()``, ``mmap()`` and the ``new_address`` argument to
+   ``mremap()`` as these have the potential to alias with existing
+   user addresses.
+
+   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+   incorrectly accept valid tagged pointers for the ``brk()``,
+   ``mmap()`` and ``mremap()`` system calls.

 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
   relaxation is disabled by default and the application thread needs to
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@ -551,6 +551,7 @@ options to your ``.config``:
 Once the kernel is built and installed, a simple

 .. code-block:: bash
+
 	modprobe example-test

 ...will run the tests.
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@ -102,7 +102,7 @@ Required sub-node properties:
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/power/power-domain.yaml
 [3] Documentation/devicetree/bindings/thermal/thermal.txt
-[4] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/sram/sram.yaml
 [5] Documentation/devicetree/bindings/reset/reset.txt

 Example:
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@ -109,7 +109,7 @@ Required properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] Documentation/devicetree/bindings/sram/sram.txt
+[3] Documentation/devicetree/bindings/sram/sram.yaml
 [4] Documentation/devicetree/bindings/power/power-domain.yaml

 Example:
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@ -62,7 +62,7 @@ Timer node:

 Syscon reboot node:

-See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
 detailed list of properties, the two values defined below are specific to the
 BCM6328-style timer:

--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@ -216,7 +216,7 @@ properties:
    $ref: '/schemas/types.yaml#/definitions/phandle-array'
    description: |
      List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.txt).
+      by this cpu (see ./idle-states.yaml).

  capacity-dmips-mhz:
    $ref: '/schemas/types.yaml#/definitions/uint32'
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@ -160,7 +160,7 @@ properties:
        items:
          - enum:
              - armadeus,imx6dl-apf6      # APF6 (Solo) SoM
-              - armadeus,imx6dl-apf6dldev # APF6 (Solo) SoM on APF6Dev board
+              - armadeus,imx6dl-apf6dev   # APF6 (Solo) SoM on APF6Dev board
              - eckelmann,imx6dl-ci4x10
              - emtrion,emcon-mx6         # emCON-MX6S or emCON-MX6DL SoM
              - emtrion,emcon-mx6-avari   # emCON-MX6S or emCON-MX6DL SoM on Avari Base
--- a/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hi3519-sysctrl.txt
@ -1,7 +1,7 @@
 * Hisilicon Hi3519 System Controller Block

 This bindings use the following binding:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml

 Required properties:
 - compatible: "hisilicon,hi3519-sysctrl".
--- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
@ -81,4 +81,4 @@ Example:
 		};
 	};

-[1]. Documentation/devicetree/bindings/arm/idle-states.txt
+[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
--- a/Documentation/devicetree/bindings/arm/omap/mpu.txt
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@ -17,7 +17,7 @@ am335x and am437x only:
 - pm-sram: Phandles to ocmcram nodes to be used for power management.
 	   First should be type 'protect-exec' for the driver to use to copy
 	   and run PM functions, second should be regular pool to be used for
-	   data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+	   data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
 	   for more details.

 Examples:
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@ -100,13 +100,14 @@ properties:
      bindings in [1]) must specify this property.

      [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.txt
-
-  "#power-domain-cells":
-    description:
-      The number of cells in a PM domain specifier as per binding in [3].
-      Must be 0 as to represent a single PM domain.
+        Documentation/devicetree/bindings/arm/idle-states.yaml

+patternProperties:
+  "^power-domain-":
+    allOf:
+      - $ref: "../power/power-domain.yaml#"
+    type: object
+    description: |
      ARM systems can have multiple cores, sometimes in an hierarchical
      arrangement. This often, but not always, maps directly to the processor
      power topology of the system. Individual nodes in a topology have their
@ -122,14 +123,8 @@ properties:
      helps to implement support for OSI mode and OS implementations may choose
      to mandate it.

-      [3] Documentation/devicetree/bindings/power/power_domain.txt
-      [4] Documentation/devicetree/bindings/power/domain-idle-state.txt
-
-  power-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider.
+      [3] Documentation/devicetree/bindings/power/power-domain.yaml
+      [4] Documentation/devicetree/bindings/power/domain-idle-state.yaml

 required:
  - compatible
@ -199,7 +194,7 @@ examples:

      CPU0: cpu@0 {
        device_type = "cpu";
-        compatible = "arm,cortex-a53", "arm,armv8";
+        compatible = "arm,cortex-a53";
        reg = <0x0>;
        enable-method = "psci";
        power-domains = <&CPU_PD0>;
@ -208,7 +203,7 @@ examples:

      CPU1: cpu@1 {
        device_type = "cpu";
-        compatible = "arm,cortex-a57", "arm,armv8";
+        compatible = "arm,cortex-a53";
        reg = <0x100>;
        enable-method = "psci";
        power-domains = <&CPU_PD1>;
@ -224,6 +219,9 @@ examples:
          exit-latency-us = <10>;
          min-residency-us = <100>;
        };
+      };
+
+      domain-idle-states {

        CLUSTER_RET: cluster-retention {
          compatible = "domain-idle-state";
@ -247,19 +245,19 @@ examples:
      compatible = "arm,psci-1.0";
      method = "smc";

-      CPU_PD0: cpu-pd0 {
+      CPU_PD0: power-domain-cpu0 {
        #power-domain-cells = <0>;
        domain-idle-states = <&CPU_PWRDN>;
        power-domains = <&CLUSTER_PD>;
      };

-      CPU_PD1: cpu-pd1 {
+      CPU_PD1: power-domain-cpu1 {
        #power-domain-cells = <0>;
        domain-idle-states =  <&CPU_PWRDN>;
        power-domains = <&CLUSTER_PD>;
      };

-      CLUSTER_PD: cluster-pd {
+      CLUSTER_PD: power-domain-cluster {
        #power-domain-cells = <0>;
        domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
      };
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@ -52,7 +52,7 @@ required:

 examples:
  - |
-    mlahb: ahb {
+    mlahb: ahb@38000000 {
      compatible = "st,mlahb", "simple-bus";
      #address-cells = <1>;
      #size-cells = <1>;
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@ -70,7 +70,6 @@ examples:
        #size-cells = <0>;

        pmic@3e3 {
-            compatible = "...";
            reg = <0x3e3>;

            /* ... */
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@ -40,7 +40,7 @@ additionalProperties: false

 examples:
  - |
-    osc24M: clk@01c20050 {
+    osc24M: clk@1c20050 {
        #clock-cells = <0>;
        compatible = "allwinner,sun4i-a10-osc-clk";
        reg = <0x01c20050 0x4>;
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@ -41,7 +41,7 @@ additionalProperties: false

 examples:
  - |
-    clk@0600005c {
+    clk@600005c {
        #clock-cells = <0>;
        compatible = "allwinner,sun9i-a80-gt-clk";
        reg = <0x0600005c 0x4>;
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@ -42,7 +42,7 @@ properties:
      be part of GCC and hence the TSENS properties can also be part
      of the GCC/clock-controller node.
      For more details on the TSENS properties please refer
-      Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+      Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

  nvmem-cell-names:
    minItems: 1
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@ -43,9 +43,13 @@ properties:
        - enum:
          - allwinner,sun8i-h3-tcon-tv
          - allwinner,sun50i-a64-tcon-tv
-          - allwinner,sun50i-h6-tcon-tv
        - const: allwinner,sun8i-a83t-tcon-tv

+      - items:
+        - enum:
+          - allwinner,sun50i-h6-tcon-tv
+        - const: allwinner,sun8i-r40-tcon-tv
+
  reg:
    maxItems: 1

--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@ -49,11 +49,7 @@ examples:
        resets = <&tcon_ch0_clk 0>;

        port {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            tve0_in_tcon0: endpoint@0 {
-                reg = <0>;
+            tve0_in_tcon0: endpoint {
                remote-endpoint = <&tcon0_out_tve0>;
            };
        };
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@ -79,21 +79,15 @@ examples:
          #size-cells = <0>;

          anx6345_in: port@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
            reg = <0>;
-            anx6345_in_tcon0: endpoint@0 {
-              reg = <0>;
+            anx6345_in_tcon0: endpoint {
              remote-endpoint = <&tcon0_out_anx6345>;
            };
          };

          anx6345_out: port@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
            reg = <1>;
-            anx6345_out_panel: endpoint@0 {
-              reg = <0>;
+            anx6345_out_panel: endpoint {
              remote-endpoint = <&panel_in_edp>;
            };
          };
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@ -37,6 +37,8 @@ examples:
    dsi@ff450000 {
        #address-cells = <1>;
        #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
        panel@0 {
            compatible = "leadtek,ltk500hd1829";
            reg = <0>;
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@ -37,6 +37,8 @@ examples:
    dsi@ff450000 {
        #address-cells = <1>;
        #size-cells = <0>;
+        reg = <0xff450000 0x1000>;
+
        panel@0 {
            compatible = "xinpeng,xpp055c272";
            reg = <0>;
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@ -174,10 +174,6 @@ examples:
      };
    };

-    soc@1c00000 {
-      lcdc0: lcdc@1c0c000 {
-        compatible = "allwinner,sun4i-a10-lcdc";
-      };
-    };
+    lcdc0: lcdc { };

 ...
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@ -37,7 +37,7 @@ Optional nodes:
   supports a single port with a single endpoint.

 - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
-   Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting
+   Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt for connecting
   tfp410 DVI encoder or lcd panel to lcdc

 [1] There is an errata about AM335x color wiring. For 16-bit color mode
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@ -143,7 +143,7 @@ examples:
            #size-cells = <2>;
            dma-coherent;
            dma-ranges;
-            ranges;
+            ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;

            ti,sci-dev-id = <118>;

@ -169,16 +169,4 @@ examples:
                ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
            };
        };
-
-        mcasp0: mcasp@02B00000 {
-            dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
-            dma-names = "tx", "rx";
-        };
-
-        crypto: crypto@4E00000 {
-            compatible = "ti,sa2ul-crypto";
-
-            dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
-            dma-names = "tx", "rx1", "rx2";
-        };
    };
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@ -84,31 +84,31 @@ examples:
    gpu_opp_table: opp_table0 {
      compatible = "operating-points-v2";

-      opp@533000000 {
+      opp-533000000 {
        opp-hz = /bits/ 64 <533000000>;
        opp-microvolt = <1250000>;
      };
-      opp@450000000 {
+      opp-450000000 {
        opp-hz = /bits/ 64 <450000000>;
        opp-microvolt = <1150000>;
      };
-      opp@400000000 {
+      opp-400000000 {
        opp-hz = /bits/ 64 <400000000>;
        opp-microvolt = <1125000>;
      };
-      opp@350000000 {
+      opp-350000000 {
        opp-hz = /bits/ 64 <350000000>;
        opp-microvolt = <1075000>;
      };
-      opp@266000000 {
+      opp-266000000 {
        opp-hz = /bits/ 64 <266000000>;
        opp-microvolt = <1025000>;
      };
-      opp@160000000 {
+      opp-160000000 {
        opp-hz = /bits/ 64 <160000000>;
        opp-microvolt = <925000>;
      };
-      opp@100000000 {
+      opp-100000000 {
        opp-hz = /bits/ 64 <100000000>;
        opp-microvolt = <912500>;
      };
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@ -138,31 +138,31 @@ examples:
    gpu_opp_table: opp_table0 {
      compatible = "operating-points-v2";

-      opp@533000000 {
+      opp-533000000 {
        opp-hz = /bits/ 64 <533000000>;
        opp-microvolt = <1250000>;
      };
-      opp@450000000 {
+      opp-450000000 {
        opp-hz = /bits/ 64 <450000000>;
        opp-microvolt = <1150000>;
      };
-      opp@400000000 {
+      opp-400000000 {
        opp-hz = /bits/ 64 <400000000>;
        opp-microvolt = <1125000>;
      };
-      opp@350000000 {
+      opp-350000000 {
        opp-hz = /bits/ 64 <350000000>;
        opp-microvolt = <1075000>;
      };
-      opp@266000000 {
+      opp-266000000 {
        opp-hz = /bits/ 64 <266000000>;
        opp-microvolt = <1025000>;
      };
-      opp@160000000 {
+      opp-160000000 {
        opp-hz = /bits/ 64 <160000000>;
        opp-microvolt = <925000>;
      };
-      opp@100000000 {
+      opp-100000000 {
        opp-hz = /bits/ 64 <100000000>;
        opp-microvolt = <912500>;
      };
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@ -123,7 +123,7 @@ examples:
        samsung,syscon-phandle = <&pmu_system_controller>;

        /* NTC thermistor is a hwmon device */
-        ncp15wb473@0 {
+        ncp15wb473 {
            compatible = "murata,ncp15wb473";
            pullup-uv = <1800000>;
            pullup-ohm = <47000>;
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
@ -1,9 +1,10 @@
-Ilitek ILI210x/ILI2117/ILI251x touchscreen controller
+Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller

 Required properties:
 - compatible:
    ilitek,ili210x for ILI210x
    ilitek,ili2117 for ILI2117
+    ilitek,ili2120 for ILI2120
    ilitek,ili251x for ILI251x

 - reg: The I2C address of the device
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@ -62,7 +62,7 @@ required:

 examples:
 - |
-    i2c@00000000 {
+    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
      gt928@5d {
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
@ -1,7 +1,7 @@
 Texas Instruments TWL family (twl4030) pwrbutton module

 This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-familly.txt.
+chip see Documentation/devicetree/bindings/mfd/twl-family.txt.

 This module provides a simple power button event via an Interrupt.

--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@ -85,7 +85,7 @@ properties:
        # LED will act as a back-light, controlled by the framebuffer system
      - backlight
        # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.txt)
+        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
      - default-on
        # LED "double" flashes at a load average based rate
      - heartbeat
--- a/Documentation/devicetree/bindings/leds/register-bit-led.txt
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt
@ -5,7 +5,7 @@ where single bits in a certain register can turn on/off a
 single LED. The register bit LEDs appear as children to the
 syscon device, with the proper compatible string. For the
 syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.txt
+Documentation/devicetree/bindings/mfd/syscon.yaml

 Each LED is represented as a sub-node of the syscon device. Each
 node's name represents the name of the corresponding LED.
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@ -33,24 +33,40 @@ properties:
    maxItems: 1

  clocks:
-    minItems: 2
-    maxItems: 3
-    items:
-      - description: The CSI interface clock
-      - description: The CSI ISP clock
-      - description: The CSI DRAM clock
+    oneOf:
+      - items:
+        - description: The CSI interface clock
+        - description: The CSI DRAM clock
+
+      - items:
+        - description: The CSI interface clock
+        - description: The CSI ISP clock
+        - description: The CSI DRAM clock

  clock-names:
-    minItems: 2
-    maxItems: 3
-    items:
-      - const: bus
-      - const: isp
-      - const: ram
+    oneOf:
+      - items:
+        - const: bus
+        - const: ram
+
+      - items:
+        - const: bus
+        - const: isp
+        - const: ram

  resets:
    maxItems: 1

+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnects:
+    maxItems: 1
+
+  # FIXME: This should be made required eventually once every SoC will
+  # have the MBUS declared.
+  interconnect-names:
+    const: dma-mem
+
  # See ./video-interfaces.txt for details
  port:
    type: object
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@ -177,7 +177,7 @@ examples:
        };
    };

-    i2c5: i2c@4807c000 {
+    i2c {
        clock-frequency = <400000>;
        #address-cells = <1>;
        #size-cells = <0>;
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@ -347,6 +347,7 @@ examples:
        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;

        #iommu-cells = <1>;
+        #reset-cells = <1>;
    };

    external-memory-controller@7001b000 {
@ -363,20 +364,23 @@ examples:
            timing-0 {
                clock-frequency = <12750000>;

-                nvidia,emc-zcal-cnt-long = <0x00000042>;
-                nvidia,emc-auto-cal-interval = <0x001fffff>;
-                nvidia,emc-ctt-term-ctrl = <0x00000802>;
-                nvidia,emc-cfg = <0x73240000>;
-                nvidia,emc-cfg-2 = <0x000008c5>;
-                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
-                nvidia,emc-bgbias-ctl0 = <0x00000008>;
                nvidia,emc-auto-cal-config = <0xa1430000>;
                nvidia,emc-auto-cal-config2 = <0x00000000>;
                nvidia,emc-auto-cal-config3 = <0x00000000>;
-                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-auto-cal-interval = <0x001fffff>;
+                nvidia,emc-bgbias-ctl0 = <0x00000008>;
+                nvidia,emc-cfg = <0x73240000>;
+                nvidia,emc-cfg-2 = <0x000008c5>;
+                nvidia,emc-ctt-term-ctrl = <0x00000802>;
                nvidia,emc-mode-1 = <0x80100003>;
                nvidia,emc-mode-2 = <0x80200008>;
                nvidia,emc-mode-4 = <0x00000000>;
+                nvidia,emc-mode-reset = <0x80001221>;
+                nvidia,emc-mrs-wait-cnt = <0x000e000e>;
+                nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+                nvidia,emc-xm2dqspadctrl2 = <0x0130b118>;
+                nvidia,emc-zcal-cnt-long = <0x00000042>;
+                nvidia,emc-zcal-interval = <0x00000000>;

                nvidia,emc-configuration = <
                    0x00000000 /* EMC_RC */
--- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt
@ -32,7 +32,7 @@ Required only for "ti,emif-am3352" and "ti,emif-am4372":
 - sram			: Phandles for generic sram driver nodes,
  first should be type 'protect-exec' for the driver to use to copy
  and run PM functions, second should be regular pool to be used for
-  data region for code. See Documentation/devicetree/bindings/sram/sram.txt
+  data region for code. See Documentation/devicetree/bindings/sram/sram.yaml
  for more details.

 Optional properties:
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@ -97,14 +97,14 @@ examples:
            regulators {
                compatible = "maxim,max77650-regulator";

-                max77650_ldo: regulator@0 {
+                max77650_ldo: regulator-ldo {
                    regulator-compatible = "ldo";
                    regulator-name = "max77650-ldo";
                    regulator-min-microvolt = <1350000>;
                    regulator-max-microvolt = <2937500>;
                };

-                max77650_sbb0: regulator@1 {
+                max77650_sbb0: regulator-sbb0 {
                    regulator-compatible = "sbb0";
                    regulator-name = "max77650-sbb0";
                    regulator-min-microvolt = <800000>;
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@ -26,8 +26,8 @@ Required properties:
            ldo6, ldo7, ldo8

 - xxx-supply: Input voltage supply regulator.
-  These entries are require if regulators are enabled for a device. Missing of these
-  properties can cause the regulator registration fails.
+  These entries are required if regulators are enabled for a device. Missing these
+  properties can cause the regulator registration to fail.
  If some of input supply is powered through battery or always-on supply then
  also it is require to have these parameters with proper node handle of always
  on power supply.
--- a/Documentation/devicetree/bindings/mfd/twl-familly.txt
+++ b/Documentation/devicetree/bindings/mfd/twl-familly.txt
--- a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
@ -20,7 +20,7 @@ RAVE SP consists of the following sub-devices:
 Device				 Description
 ------				 -----------
 rave-sp-wdt			: Watchdog
-rave-sp-nvmem			: Interface to onborad EEPROM
+rave-sp-nvmem			: Interface to onboard EEPROM
 rave-sp-backlight		: Display backlight
 rave-sp-hwmon			: Interface to onboard hardware sensors
 rave-sp-leds			: Interface to onboard LEDs
--- a/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+++ b/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@ -26,7 +26,7 @@ For generic IOMMU bindings, see
 Documentation/devicetree/bindings/iommu/iommu.txt.

 For arm-smmu binding, see:
-Documentation/devicetree/bindings/iommu/arm,smmu.txt.
+Documentation/devicetree/bindings/iommu/arm,smmu.yaml.

 Required properties:

--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@ -370,6 +370,7 @@ examples:
    mmc3: mmc@1c12000 {
        #address-cells = <1>;
        #size-cells = <0>;
+        reg = <0x1c12000 0x200>;
        pinctrl-names = "default";
        pinctrl-0 = <&mmc3_pins_a>;
        vmmc-supply = <&reg_vmmc3>;
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@ -124,7 +124,7 @@ not every application needs SDIO irq, e.g. MMC cards.
 		pinctrl-1 = <&mmc1_idle>;
 		pinctrl-2 = <&mmc1_sleep>;
 		...
-		interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&intc 64 &gpio2 28 IRQ_TYPE_LEVEL_LOW>;
 	};

 	mmc1_idle : pinmux_cirq_pin {
--- a/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
+++ b/Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
@ -27,7 +27,7 @@ Required properties of NAND chips:
  - reg: shall contain the native Chip Select ids from 0 to max supported by
    the cadence nand flash controller

-See Documentation/devicetree/bindings/mtd/nand.txt for more details on
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml for more details on
 generic bindings.

 Example:
--- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt
@ -45,7 +45,7 @@ Optional properties:
  switch queue

 - resets: a single phandle and reset identifier pair. See
-  Documentation/devicetree/binding/reset/reset.txt for details.
+  Documentation/devicetree/bindings/reset/reset.txt for details.

 - reset-names: If the "reset" property is specified, this property should have
  the value "switch" to denote the switch reset line.
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@ -110,6 +110,13 @@ PROPERTIES
 		Usage: required
 		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt

+- fsl,erratum-a050385
+		Usage: optional
+		Value type: boolean
+		Definition: A boolean property. Indicates the presence of the
+		erratum A050385 which indicates that DMA transactions that are
+		split can result in a FMan lock.
+
 =============================================================================
 FMan MURAM Node

--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@ -56,7 +56,6 @@ patternProperties:
 examples:
  - |
    davinci_mdio: mdio@5c030000 {
-        compatible = "ti,davinci_mdio";
        reg = <0x5c030000 0x1000>;
        #address-cells = <1>;
        #size-cells = <0>;
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@ -76,6 +76,8 @@ examples:
      qfprom: eeprom@700000 {
          #address-cells = <1>;
          #size-cells = <1>;
+          reg = <0x00700000 0x100000>;
+
          wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;

          /* ... */
--- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@ -86,7 +86,7 @@ examples:
    #include <dt-bindings/clock/sun4i-a10-ccu.h>
    #include <dt-bindings/reset/sun4i-a10-ccu.h>

-    usbphy: phy@01c13400 {
+    usbphy: phy@1c13400 {
        #phy-cells = <1>;
        compatible = "allwinner,sun4i-a10-usb-phy";
        reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@ -17,7 +17,7 @@ description: |+
                    "aspeed,ast2400-scu", "syscon", "simple-mfd"

  Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@ -18,7 +18,7 @@ description: |+
  			"aspeed,g5-scu", "syscon", "simple-mfd"

  Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@ -17,7 +17,7 @@ description: |+
                "aspeed,ast2600-scu", "syscon", "simple-mfd"

  Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@ -248,7 +248,7 @@ examples:
      };

    //Example 3 pin groups
-      pinctrl@60020000 {
+      pinctrl {
        usart1_pins_a: usart1-0 {
                pins1 {
                        pinmux = <STM32_PINMUX('A', 9, AF7)>;
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@ -18,7 +18,7 @@ description: |+
                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"

  Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/power/domain-idle-state.txt
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt
@ -1,33 +0,0 @@
-PM Domain Idle State Node:
-
-A domain idle state node represents the state parameters that will be used to
-select the state when there are no active components in the domain.
-
-The state node has the following parameters -
-
- compatible:
-	Usage: Required
-	Value type: <string>
-	Definition: Must be "domain-idle-state".
-
- entry-latency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing worst case latency in
-		    microseconds required to enter the idle state.
-		    The exit-latency-us duration may be guaranteed
-		    only after entry-latency-us has passed.
-
- exit-latency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing worst case latency
-		    in microseconds required to exit the idle state.
-
- min-residency-us
-	Usage: Required
-	Value type: <prop-encoded-array>
-	Definition: u32 value representing minimum residency duration
-		    in microseconds after which the idle state will yield
-		    power benefits after overcoming the overhead in entering
-i		    the idle state.
--- a/Documentation/devicetree/bindings/power/domain-idle-state.yaml
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.yaml
@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PM Domain Idle States binding description
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description:
+  A domain idle state node represents the state parameters that will be used to
+  select the state when there are no active components in the PM domain.
+
+properties:
+  $nodename:
+    const: domain-idle-states
+
+patternProperties:
+  "^(cpu|cluster|domain)-":
+    type: object
+    description:
+      Each state node represents a domain idle state description.
+
+    properties:
+      compatible:
+        const: domain-idle-state
+
+      entry-latency-us:
+        description:
+          The worst case latency in microseconds required to enter the idle
+          state. Note that, the exit-latency-us duration may be guaranteed only
+          after the entry-latency-us has passed.
+
+      exit-latency-us:
+        description:
+          The worst case latency in microseconds required to exit the idle
+          state.
+
+      min-residency-us:
+        description:
+          The minimum residency duration in microseconds after which the idle
+          state will yield power benefits, after overcoming the overhead while
+          entering the idle state.
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+examples:
+  - |
+
+    domain-idle-states {
+      domain_retention: domain-retention {
+        compatible = "domain-idle-state";
+        entry-latency-us = <20>;
+        exit-latency-us = <40>;
+        min-residency-us = <80>;
+      };
+    };
+...
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@ -25,22 +25,20 @@ description: |+

 properties:
  $nodename:
-    pattern: "^(power-controller|power-domain)(@.*)?$"
+    pattern: "^(power-controller|power-domain)([@-].*)?$"

  domain-idle-states:
    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description:
-      A phandle of an idle-state that shall be soaked into a generic domain
-      power state. The idle state definitions are compatible with
-      domain-idle-state specified in
-      Documentation/devicetree/bindings/power/domain-idle-state.txt
-      phandles that are not compatible with domain-idle-state will be ignored.
-      The domain-idle-state property reflects the idle state of this PM domain
-      and not the idle states of the devices or sub-domains in the PM domain.
-      Devices and sub-domains have their own idle-states independent
-      of the parent domain's idle states. In the absence of this property,
-      the domain would be considered as capable of being powered-on
-      or powered-off.
+    description: |
+      Phandles of idle states that defines the available states for the
+      power-domain provider. The idle state definitions are compatible with the
+      domain-idle-state bindings, specified in ./domain-idle-state.yaml.
+
+      Note that, the domain-idle-state property reflects the idle states of this
+      PM domain and not the idle states of the devices or sub-domains in the PM
+      domain. Devices and sub-domains have their own idle states independent of
+      the parent domain's idle states. In the absence of this property, the
+      domain would be considered as capable of being powered-on or powered-off.

  operating-points-v2:
    $ref: /schemas/types.yaml#/definitions/phandle-array
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@ -109,4 +109,4 @@ Example:
 		required-opps = <&domain1_opp_1>;
 	};

-[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
+[1]. Documentation/devicetree/bindings/power/domain-idle-state.yaml
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@ -161,7 +161,7 @@ The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the PMICs below.

-pm8005:
+pm8004:
 	s2, s5

 pm8005:
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@ -191,7 +191,7 @@ patternProperties:

 examples:
  - |
-    xyzreg: regulator@0 {
+    xyzreg: regulator {
      regulator-min-microvolt = <1000000>;
      regulator-max-microvolt = <2500000>;
      regulator-always-on;
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@ -23,7 +23,11 @@ properties:
    description: Global reset register offset and bit offset.
    allOf:
      - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - maxItems: 2
+    items:
+      - description: Register offset
+      - description: Register bit offset
+        minimum: 0
+        maximum: 31

  "#reset-cells":
    minimum: 2
--- a/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt
+++ b/Documentation/devicetree/bindings/reset/st,stm32mp1-rcc.txt
@ -3,4 +3,4 @@ STMicroelectronics STM32MP1 Peripheral Reset Controller

 The RCC IP is both a reset and a clock controller.

-Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
+Please see Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
--- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml
@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,aiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic AIU audio output controller
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 2
+
+  compatible:
+    items:
+      - enum:
+        - amlogic,aiu-gxbb
+        - amlogic,aiu-gxl
+        - amlogic,aiu-meson8
+        - amlogic,aiu-meson8b
+      - const:
+          amlogic,aiu
+
+  clocks:
+    items:
+      - description: AIU peripheral clock
+      - description: I2S peripheral clock
+      - description: I2S output clock
+      - description: I2S master clock
+      - description: I2S mixer clock
+      - description: SPDIF peripheral clock
+      - description: SPDIF output clock
+      - description: SPDIF master clock
+      - description: SPDIF master clock multiplexer
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2s_pclk
+      - const: i2s_aoclk
+      - const: i2s_mclk
+      - const: i2s_mixer
+      - const: spdif_pclk
+      - const: spdif_aoclk
+      - const: spdif_mclk
+      - const: spdif_mclk_sel
+
+  interrupts:
+    items:
+      - description: I2S interrupt line
+      - description: SPDIF interrupt line
+
+  interrupt-names:
+    items:
+      - const: i2s
+      - const: spdif
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/gxbb-clkc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+    aiu: audio-controller@5400 {
+        compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+        #sound-dai-cells = <2>;
+        reg = <0x0 0x5400 0x0 0x2ac>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "i2s", "spdif";
+        clocks = <&clkc CLKID_AIU_GLUE>,
+                 <&clkc CLKID_I2S_OUT>,
+                 <&clkc CLKID_AOCLK_GATE>,
+                 <&clkc CLKID_CTS_AMCLK>,
+                 <&clkc CLKID_MIXER_IFACE>,
+                 <&clkc CLKID_IEC958>,
+                 <&clkc CLKID_IEC958_GATE>,
+                 <&clkc CLKID_CTS_MCLK_I958>,
+                 <&clkc CLKID_CTS_I958>;
+        clock-names = "pclk",
+                      "i2s_pclk",
+                      "i2s_aoclk",
+                      "i2s_mclk",
+                      "i2s_mixer",
+                      "spdif_pclk",
+                      "spdif_aoclk",
+                      "spdif_mclk",
+                      "spdif_mclk_sel";
+        resets = <&reset RESET_AIU>;
+    };
+
--- a/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,g12a-toacodec.yaml
@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,g12a-toacodec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12a Internal DAC Control Glue
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - items:
+        - const:
+            amlogic,g12a-toacodec
+      - items:
+        - enum:
+          - amlogic,sm1-toacodec
+        - const:
+            amlogic,g12a-toacodec
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+    toacodec: audio-controller@740 {
+        compatible = "amlogic,g12a-toacodec";
+        reg = <0x0 0x740 0x0 0x4>;
+        #sound-dai-cells = <1>;
+        resets = <&clkc_audio AUD_RESET_TOACODEC>;
+    };
--- a/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GX sound card
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - const: amlogic,gx-sound-card
+
+  audio-aux-devs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: list of auxiliary devices
+
+  audio-routing:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list of the connections between audio components. Each entry is a
+      pair of strings, the first being the connection's sink, the second
+      being the connection's source.
+
+  audio-widgets:
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    minItems: 2
+    description: |-
+      A list off component DAPM widget. Each entry is a pair of strings,
+      the first being the widget type, the second being the widget name
+
+  model:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: User specified audio sound card name
+
+patternProperties:
+  "^dai-link-[0-9]+$":
+    type: object
+    description: |-
+      dai-link child nodes:
+        Container for dai-link level properties and the CODEC sub-nodes.
+        There should be at least one (and probably more) subnode of this type
+
+    properties:
+      dai-format:
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ i2s, left-j, dsp_a ]
+
+      mclk-fs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |-
+          Multiplication factor between the frame rate and master clock
+          rate
+
+      sound-dai:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle of the CPU DAI
+
+    patternProperties:
+      "^codec-[0-9]+$":
+        type: object
+        description: |-
+          Codecs:
+          dai-link representing backend links should have at least one subnode.
+          One subnode for each codec of the dai-link. dai-link representing
+          frontend links have no codec, therefore have no subnodes
+
+        properties:
+          sound-dai:
+            $ref: /schemas/types.yaml#/definitions/phandle
+            description: phandle of the codec DAI
+
+        required:
+          - sound-dai
+
+    required:
+      - sound-dai
+
+required:
+  - model
+  - dai-link-0
+
+examples:
+  - |
+    sound {
+        compatible = "amlogic,gx-sound-card";
+        model = "GXL-ACME-S905X-FOO";
+        audio-aux-devs = <&amp>;
+        audio-routing = "I2S ENCODER I2S IN", "I2S FIFO Playback";
+
+        dai-link-0 {
+               sound-dai = <&i2s_fifo>;
+        };
+
+        dai-link-1 {
+                sound-dai = <&i2s_encoder>;
+                dai-format = "i2s";
+                mclk-fs = <256>;
+
+                codec-0 {
+                        sound-dai = <&codec0>;
+                };
+
+                codec-1 {
+                        sound-dai = <&codec1>;
+                };
+        };
+    };
+
--- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
+++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml
@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/amlogic,t9015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic T9015 Internal Audio DAC
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  $nodename:
+    pattern: "^audio-controller@.*"
+
+  "#sound-dai-cells":
+    const: 0
+
+  compatible:
+    items:
+      - const: amlogic,t9015
+
+  clocks:
+    items:
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/g12a-clkc.h>
+    #include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+
+    acodec: audio-controller@32000 {
+        compatible = "amlogic,t9015";
+        reg = <0x0 0x32000 0x0 0x14>;
+        #sound-dai-cells = <0>;
+        clocks = <&clkc CLKID_AUDIO_CODEC>;
+        clock-names = "pclk";
+        resets = <&reset RESET_AUDIO_CODEC>;
+    };
+
--- a/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
+++ b/Documentation/devicetree/bindings/sound/brcm,bcm63xx-audio.txt
@ -0,0 +1,29 @@
+Broadcom DSL/PON BCM63xx Audio I2S controller
+
+Required properties:
+- compatible:     Should be "brcm,bcm63xx-i2s".
+- #address-cells: 32bit valued, 1 cell.
+- #size-cells:    32bit valued, 0 cell.
+- reg:            Should contain audio registers location and length
+- interrupts:     Should contain the interrupt for the controller.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    One of each entry matching the clocks phandles list:
+                  - "i2sclk" (generated clock) Required.
+                  - "i2sosc" (fixed 200MHz clock) Required.
+
+(1) : The generated clock is required only when any of TX and RX
+      works on Master Mode.
+(2) : The fixed 200MHz clock is from internal chip and always on
+
+Example:
+
+		i2s: bcm63xx-i2s {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63xx-i2s";
+			reg = <0xFF802080 0xFF>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&i2sclk>, <&osc>;
+			clock-names = "i2sclk","i2sosc";
+		};
--- a/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs42l51.yaml
@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs42l51.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CS42L51 audio codec DT bindings
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+properties:
+  compatible:
+      const: cirrus,cs42l51
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: MCLK
+
+  reset-gpios:
+    maxItems: 1
+
+  VL-supply:
+    description: phandle to voltage regulator of digital interface section
+
+  VD-supply:
+    description: phandle to voltage regulator of digital internal section
+
+  VA-supply:
+    description: phandle to voltage regulator of analog internal section
+
+  VAHP-supply:
+    description: phandle to voltage regulator of headphone
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c@0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cs42l51@4a {
+        compatible = "cirrus,cs42l51";
+        reg = <0x4a>;
+        #sound-dai-cells = <0>;
+        clocks = <&mclk_prov>;
+        clock-names = "MCLK";
+        VL-supply = <&reg_audio>;
+        VD-supply = <&reg_audio>;
+        VA-supply = <&reg_audio>;
+        VAHP-supply = <&reg_audio>;
+        reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
--- a/Documentation/devicetree/bindings/sound/cs42l51.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l51.txt
@ -1,33 +0,0 @@
-CS42L51 audio CODEC
-
-Required properties:
-
-  - compatible : "cirrus,cs42l51"
-
-  - reg : the I2C address of the device for I2C.
-
-Optional properties:
-  - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
-    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
-
-  - reset-gpios : GPIO specification for the reset pin. If specified, it will be
-    deasserted before starting the communication with the codec.
-
-  - clocks : a list of phandles + clock-specifiers, one for each entry in
-    clock-names
-
-  - clock-names : must contain "MCLK"
-
-Example:
-
-cs42l51: cs42l51@4a {
-	compatible = "cirrus,cs42l51";
-	reg = <0x4a>;
-	clocks = <&mclk_prov>;
-	clock-names = "MCLK";
-	VL-supply = <&reg_audio>;
-	VD-supply = <&reg_audio>;
-	VA-supply = <&reg_audio>;
-	VAHP-supply = <&reg_audio>;
-	reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
-};
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.txt
@ -1,44 +0,0 @@
-Audio codec controlled by ChromeOS EC
-
-Google's ChromeOS EC codec is a digital mic codec provided by the
-Embedded Controller (EC) and is controlled via a host-command interface.
-
-An EC codec node should only be found as a sub-node of the EC node (see
-Documentation/devicetree/bindings/mfd/cros-ec.txt).
-
-Required properties:
- compatible: Must contain "google,cros-ec-codec"
- #sound-dai-cells: Should be 1. The cell specifies number of DAIs.
-
-Optional properties:
- reg: Pysical base address and length of shared memory region from EC.
-       It contains 3 unsigned 32-bit integer.  The first 2 integers
-       combine to become an unsigned 64-bit physical address.  The last
-       one integer is length of the shared memory.
- memory-region: Shared memory region to EC.  A "shared-dma-pool".  See
-                 ../reserved-memory/reserved-memory.txt for details.
-
-Example:
-
-{
-	...
-
-	reserved_mem: reserved_mem {
-		compatible = "shared-dma-pool";
-		reg = <0 0x52800000 0 0x100000>;
-		no-map;
-	};
-}
-
-cros-ec@0 {
-	compatible = "google,cros-ec-spi";
-
-	...
-
-	cros_ec_codec: ec-codec {
-		compatible = "google,cros-ec-codec";
-		#sound-dai-cells = <1>;
-		reg = <0x0 0x10500000 0x80000>;
-		memory-region = <&reserved_mem>;
-	};
-};
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/google,cros-ec-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio codec controlled by ChromeOS EC
+
+maintainers:
+  - Cheng-Yi Chiang <cychiang@chromium.org>
+
+description: |
+  Google's ChromeOS EC codec is a digital mic codec provided by the
+  Embedded Controller (EC) and is controlled via a host-command interface.
+  An EC codec node should only be found as a sub-node of the EC node (see
+  Documentation/devicetree/bindings/mfd/cros-ec.txt).
+
+properties:
+  compatible:
+    const: google,cros-ec-codec
+
+  "#sound-dai-cells":
+    const: 1
+
+  reg:
+    items:
+      - description: |
+          Physical base address and length of shared memory region from EC.
+          It contains 3 unsigned 32-bit integer. The first 2 integers
+          combine to become an unsigned 64-bit physical address.
+          The last one integer is the length of the shared memory.
+
+  memory-region:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Shared memory region to EC.  A "shared-dma-pool".
+      See ../reserved-memory/reserved-memory.txt for details.
+
+required:
+  - compatible
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved_mem: reserved-mem@52800000 {
+        compatible = "shared-dma-pool";
+        reg = <0x52800000 0x100000>;
+        no-map;
+    };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0>;
+            cros_ec_codec: ec-codec@10500000 {
+                compatible = "google,cros-ec-codec";
+                #sound-dai-cells = <1>;
+                reg = <0x0 0x10500000 0x80000>;
+                memory-region = <&reserved_mem>;
+            };
+        };
+    };
--- a/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
+++ b/Documentation/devicetree/bindings/sound/ingenic,aic.yaml
@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs AC97 / I2S Controller (AIC) DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-controller@'
+
+  compatible:
+    oneOf:
+      - enum:
+        - ingenic,jz4740-i2s
+        - ingenic,jz4760-i2s
+        - ingenic,jz4770-i2s
+        - ingenic,jz4780-i2s
+      - items:
+        - const: ingenic,jz4725b-i2s
+        - const: ingenic,jz4740-i2s
+
+  '#sound-dai-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AIC clock
+      - description: I2S clock
+      - description: EXT clock
+      - description: PLL/2 clock
+
+  clock-names:
+    items:
+      - const: aic
+      - const: i2s
+      - const: ext
+      - const: pll half
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for I2S RX
+      - description: DMA controller phandle and request line for I2S TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    aic: audio-controller@10020000 {
+      compatible = "ingenic,jz4740-i2s";
+      reg = <0x10020000 0x38>;
+
+      #sound-dai-cells = <0>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <18>;
+
+      clocks = <&cgu JZ4740_CLK_AIC>,
+               <&cgu JZ4740_CLK_I2S>,
+               <&cgu JZ4740_CLK_EXT>,
+               <&cgu JZ4740_CLK_PLL_HALF>;
+      clock-names = "aic", "i2s", "ext", "pll half";
+
+      dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+      dma-names = "rx", "tx";
+    };
--- a/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/ingenic,jz4740-i2s.txt
@ -1,23 +0,0 @@
-Ingenic JZ4740 I2S controller
-
-Required properties:
- compatible : "ingenic,jz4740-i2s" or "ingenic,jz4780-i2s"
- reg : I2S registers location and length
- clocks : AIC and I2S PLL clock specifiers.
- clock-names: "aic" and "i2s"
- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
- dma-names: Must be "tx" and "rx"
-
-Example:
-
-i2s: i2s@10020000 {
-	compatible = "ingenic,jz4740-i2s";
-	reg = <0x10020000 0x94>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
-	clock-names = "aic", "i2s";
-
-	dmas = <&dma 2>, <&dma 3>;
-	dma-names = "tx", "rx";
-
-};
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@ -18,6 +18,7 @@ Required properties:
  * Headphone Jack
  * Int Spk
  * Mic Jack
+  * Int Mic

 - nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
 - nvidia,audio-codec : The phandle of the WM8903 audio codec
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt
@ -10,6 +10,11 @@ Required properties:
 - clock-names: should be "pclk".
 - spk-depop-time-ms: speak depop time msec.

+Optional properties:
+
+- mute-gpios: GPIO specifier for external line driver control (typically the
+              dedicated GPIO_MUTE pin)
+
 Example for rk3328 internal codec:

 codec: codec@ff410000 {
@ -18,6 +23,6 @@ codec: codec@ff410000 {
 	rockchip,grf = <&grf>;
 	clocks = <&cru PCLK_ACODEC>;
 	clock-names = "pclk";
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 	spk-depop-time-ms = 100;
-	status = "disabled";
 };
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@ -1,49 +0,0 @@
-* Rockchip I2S controller
-
-The I2S bus (Inter-IC sound bus) is a serial link for digital
-audio data transfer between devices in the system.
-
-Required properties:
-
- compatible: should be one of the following:
-   - "rockchip,rk3066-i2s": for rk3066
-   - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
-   - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
-   - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
-   - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
-   - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
-   - "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
-   - "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
-   - "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
-   - "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
- reg: physical base address of the controller and length of memory mapped
-  region.
- interrupts: should contain the I2S interrupt.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain the following:
-   - "i2s_hclk": clock for I2S BUS
-   - "i2s_clk" : clock for I2S controller
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
-
-Required properties for controller which support multi channels
-playback/capture:
-
- rockchip,grf: the phandle of the syscon node for GRF register.
-
-Example for rk3288 I2S controller:
-
-i2s@ff890000 {
-	compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
-	reg = <0xff890000 0x10000>;
-	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "tx", "rx";
-	clock-names = "i2s_hclk", "i2s_clk";
-	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
-	rockchip,playback-channels = <8>;
-	rockchip,capture-channels = <2>;
-};
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.yaml
@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S controller
+
+description:
+  The I2S bus (Inter-IC sound bus) is a serial link for digital
+  audio data transfer between devices in the system.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-i2s
+      - items:
+          - enum:
+            - rockchip,px30-i2s
+            - rockchip,rk3036-i2s
+            - rockchip,rk3188-i2s
+            - rockchip,rk3228-i2s
+            - rockchip,rk3288-i2s
+            - rockchip,rk3328-i2s
+            - rockchip,rk3366-i2s
+            - rockchip,rk3368-i2s
+            - rockchip,rk3399-i2s
+          - const: rockchip,rk3066-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for I2S controller
+      - description: clock for I2S BUS
+
+  clock-names:
+    items:
+      - const: i2s_clk
+      - const: i2s_hclk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  rockchip,capture-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 2
+    description:
+      Max capture channels, if not set, 2 channels default.
+
+  rockchip,playback-channels:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Max playback channels, if not set, 8 channels default.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property for controllers which support multi channel
+      playback/capture.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2s@ff890000 {
+      compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+      reg = <0xff890000 0x10000>;
+      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>;
+      clock-names = "i2s_clk", "i2s_hclk";
+      dmas = <&pdma1 0>, <&pdma1 1>;
+      dma-names = "tx", "rx";
+      rockchip,capture-channels = <2>;
+      rockchip,playback-channels = <8>;
+      #sound-dai-cells = <0>;
+    };
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@ -32,6 +32,18 @@ Optional properties:
  The delay time is realtek,btndet-delay value multiple of 8.192 ms.
  If absent, the default is 16.

+- #clock-cells : Should be set to '<1>',  wclk and bclk sources provided.
+- clock-output-names : Name given for DAI clocks output.
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- realtek,dmic-clk-rate-hz : Set the clock rate (hz) for the requirement of
+  the particular DMIC.
+
+- realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of
+  the particular DMIC.
+
 Pins on the device (for linking into audio routes) for RT5682:

  * DMIC L1
@ -53,4 +65,10 @@ rt5682 {
 	realtek,dmic1-clk-pin = <1>;
 	realtek,jd-src = <1>;
 	realtek,btndet-delay = <16>;
+
+	#clock-cells = <1>;
+	clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+	clocks = <&osc>;
+	clock-names = "mclk";
 };
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
@ -1,62 +0,0 @@
-STMicroelectronics STM32 SPI/I2S Controller
-
-The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
-Only some SPI instances support I2S.
-
-Required properties:
-  - compatible: Must be "st,stm32h7-i2s"
-  - reg: Offset and length of the device's register set.
-  - interrupts: Must contain the interrupt line id.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
-	"i2sclk": clock which feeds the internal clock generator
-	"pclk": clock which feeds the peripheral bus interface
-	"x8k": I2S parent clock for sampling rates multiple of 8kHz.
-	"x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
-  - dmas: DMA specifiers for tx and rx dma.
-    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
-  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the reset controller
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&i2s2_port>;
-};
-
-i2s2: audio-controller@40003800 {
-	compatible = "st,stm32h7-i2s";
-	reg = <0x40003800 0x400>;
-	interrupts = <36>;
-	clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "i2sclk",  "x8k", "x11k";
-	dmas = <&dmamux2 2 39 0x400 0x1>,
-           <&dmamux2 3 40 0x400 0x1>;
-	dma-names = "rx", "tx";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2s2>;
-
-	i2s2_port: port@0 {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-			format = "i2s";
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port@0 {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml
@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 SPI/I2S Controller
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description:
+  The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
+  Only some SPI instances support I2S.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-i2s
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock feeding the peripheral bus interface.
+      - description: clock feeding the internal clock generator.
+      - description: I2S parent clock for sampling rates multiple of 8kHz.
+      - description: I2S parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: i2sclk
+      - const: x8k
+      - const: x11k
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio capture DMA.
+      - description: audio playback DMA.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    i2s2: audio-controller@4000b000 {
+        compatible = "st,stm32h7-i2s";
+        #sound-dai-cells = <0>;
+        reg = <0x4000b000 0x400>;
+        clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+        clock-names = "pclk", "i2sclk", "x8k", "x11k";
+        interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 39 0x400 0x01>,
+               <&dmamux1 40 0x400 0x01>;
+        dma-names = "rx", "tx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2s2_pins_a>;
+    };
+
+...
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@ -36,7 +36,7 @@ SAI subnodes required properties:
  - clock-names: Must contain "sai_ck".
 	Must also contain "MCLK", if SAI shares a master clock,
 	with a SAI set as MCLK clock provider.
-  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
+  - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
  - dma-names: identifier string for each DMA request line
 	"tx": if sai sub-block is configured as playback DAI
 	"rx": if sai sub-block is configured as capture DAI
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt
@ -1,56 +0,0 @@
-STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
-
-The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
-IEC-60958 and IEC-61937.
-
-Required properties:
-  - compatible: should be "st,stm32h7-spdifrx"
-  - reg: cpu DAI IP base address and size
-  - clocks: must contain an entry for kclk (used as S/PDIF signal reference)
-  - clock-names: must contain "kclk"
-  - interrupts: cpu DAI interrupt line
-  - dmas: DMA specifiers for audio data DMA and iec control flow DMA
-    See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
-  - dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SPDIFRX
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-spdifrx: spdifrx@40004000 {
-	compatible = "st,stm32h7-spdifrx";
-	reg = <0x40004000 0x400>;
-	clocks = <&rcc SPDIFRX_CK>;
-	clock-names = "kclk";
-	interrupts = <97>;
-	dmas = <&dmamux1 2 93 0x400 0x0>,
-	       <&dmamux1 3 94 0x400 0x0>;
-	dma-names = "rx", "rx-ctrl";
-	pinctrl-0 = <&spdifrx_pins>;
-	pinctrl-names = "default";
-
-	spdifrx_port: port {
-		cpu_endpoint: endpoint {
-			remote-endpoint = <&codec_endpoint>;
-		};
-	};
-};
-
-spdif_in: spdif-in {
-	compatible = "linux,spdif-dir";
-
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
-
-soundcard {
-	compatible = "audio-graph-card";
-	dais = <&spdifrx_port>;
-};
--- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml
@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description: |
+  The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
+  IEC-60958 and IEC-61937.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-spdifrx
+
+  "#sound-dai-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: audio data capture DMA
+      - description: IEC status bits capture DMA
+
+  dma-names:
+    items:
+      - const: rx
+      - const: rx-ctrl
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#sound-dai-cells"
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    spdifrx: spdifrx@40004000 {
+        compatible = "st,stm32h7-spdifrx";
+        #sound-dai-cells = <0>;
+        reg = <0x40004000 0x400>;
+        clocks = <&rcc SPDIF_K>;
+        clock-names = "kclk";
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dmamux1 2 93 0x400 0x0>,
+               <&dmamux1 3 94 0x400 0x0>;
+        dma-names = "rx", "rx-ctrl";
+        pinctrl-0 = <&spdifrx_pins>;
+        pinctrl-names = "default";
+    };
+
+...
--- a/Documentation/devicetree/bindings/sound/tas2562.txt
+++ b/Documentation/devicetree/bindings/sound/tas2562.txt
@ -8,7 +8,7 @@ real time monitoring of loudspeaker behavior.
 Required properties:
 - #address-cells  - Should be <1>.
 - #size-cells     - Should be <0>.
- - compatible:	   - Should contain "ti,tas2562".
+ - compatible:	   - Should contain "ti,tas2562", "ti,tas2563".
 - reg:		   - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f.
 - ti,imon-slot-no:- TDM TX current sense time slot.

--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/tlv320adcx140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TLV320ADCX140 Quad Channel Analog-to-Digital Converter
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The TLV320ADCX140 are multichannel (4-ch analog recording or 8-ch digital
+  PDM microphones recording), high-performance audio, analog-to-digital
+  converter (ADC) with analog inputs supporting up to 2V RMS. The TLV320ADCX140
+  family supports line and  microphone Inputs, and offers a programmable
+  microphone bias or supply voltage generation.
+
+  Specifications can be found at:
+    http://www.ti.com/lit/ds/symlink/tlv320adc3140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc5140.pdf
+    http://www.ti.com/lit/ds/symlink/tlv320adc6140.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,tlv320adc3140
+      - const: ti,tlv320adc5140
+      - const: ti,tlv320adc6140
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+
+  reset-gpios:
+    description: |
+       GPIO used for hardware reset.
+
+  areg-supply:
+      description: |
+       Regulator with AVDD at 3.3V.  If not defined then the internal regulator
+       is enabled.
+
+  ti,mic-bias-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Mic bias is set to VREF
+       1 - Mic bias is set to VREF × 1.096
+       6 - Mic bias is set to AVDD
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 6]
+
+  ti,vref-source:
+    description: |
+       Indicates the source for MIC Bias.
+       0 - Set VREF to 2.75V
+       1 - Set VREF to 2.5V
+       2 - Set VREF to 1.375V
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      codec: codec@4c {
+        compatible = "ti,tlv320adc5140";
+        reg = <0x4c>;
+        ti,mic-bias-source = <6>;
+        reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };
--- a/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/st,stm32-spi.yaml
@ -49,7 +49,7 @@ properties:
  dmas:
    description: |
      DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
-      the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
+      the STM32 DMA bindings Documentation/devicetree/bindings/dma/st,stm32-dma.yaml.
    items:
      - description: rx DMA channel
      - description: tx DMA channel
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@ -125,7 +125,7 @@ examples:
      #size-cells = <1>;
      ranges;

-      sram_a: sram@00000000 {
+      sram_a: sram@0 {
        compatible = "mmio-sram";
        reg = <0x00000000 0xc000>;
        #address-cells = <1>;
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@ -17,7 +17,7 @@ description: |+
                "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"

  Refer to the the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.txt
+  Documentation/devicetree/bindings/mfd/syscon.yaml

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@ -87,7 +87,7 @@ additionalProperties: false

 examples:
  - |
-    timer {
+    timer@1c20c00 {
        compatible = "allwinner,sun4i-a10-timer";
        reg = <0x01c20c00 0x400>;
        interrupts = <22>,
--- a/Documentation/driver-api/dmaengine/client.rst
+++ b/Documentation/driver-api/dmaengine/client.rst
@ -151,8 +151,8 @@ The details of these operations are:
     Note that callbacks will always be invoked from the DMA
     engines tasklet, never from interrupt context.

-Optional: per descriptor metadata
---------------------------------
+  **Optional: per descriptor metadata**
+
  DMAengine provides two ways for metadata support.

  DESC_METADATA_CLIENT
@ -199,12 +199,15 @@ Optional: per descriptor metadata
  DESC_METADATA_CLIENT

    - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+
      1. prepare the descriptor (dmaengine_prep_*)
         construct the metadata in the client's buffer
      2. use dmaengine_desc_attach_metadata() to attach the buffer to the
         descriptor
      3. submit the transfer
+
    - DMA_DEV_TO_MEM:
+
      1. prepare the descriptor (dmaengine_prep_*)
      2. use dmaengine_desc_attach_metadata() to attach the buffer to the
         descriptor
@ -215,6 +218,7 @@ Optional: per descriptor metadata
  DESC_METADATA_ENGINE

    - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
+
      1. prepare the descriptor (dmaengine_prep_*)
      2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
         engine's metadata area
@ -222,7 +226,9 @@ Optional: per descriptor metadata
      4. use dmaengine_desc_set_metadata_len()  to tell the DMA engine the
         amount of data the client has placed into the metadata buffer
      5. submit the transfer
+
    - DMA_DEV_TO_MEM:
+
      1. prepare the descriptor (dmaengine_prep_*)
      2. submit the transfer
      3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get
@ -278,8 +284,8 @@ Optional: per descriptor metadata

      void dma_async_issue_pending(struct dma_chan *chan);

-Further APIs:
-------------
+Further APIs
+------------

 1. Terminate APIs

--- a/Documentation/driver-api/ipmb.rst
+++ b/Documentation/driver-api/ipmb.rst
@ -71,9 +71,13 @@ b) Example for device tree::
            ipmb@10 {
                    compatible = "ipmb-dev";
                    reg = <0x10>;
+                    i2c-protocol;
            };
     };

+If xmit of data to be done using raw i2c block vs smbus
+then "i2c-protocol" needs to be defined as above.
+
 2) Manually from Linux::

     modprobe ipmb-dev-int
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@ -164,9 +164,9 @@ file.
 	void __iomem *base;
    };

-    struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
-				     struct dentry *parent,
-				     struct debugfs_regset32 *regset);
+    debugfs_create_regset32(const char *name, umode_t mode,
+			    struct dentry *parent,
+			    struct debugfs_regset32 *regset);

    void debugfs_print_regs32(struct seq_file *s, struct debugfs_reg32 *regs,
 			 int nregs, void __iomem *base, char *prefix);
--- a/Show More
+++ b/Show More