net: ethernet: ti: am65-cpsw: use napi_complete_done() in TX completion
This patch enables support for hard irqs deferral feature from Eric Dumazet [1] for TI K3 CPSW driver by using napi_complete_done() in TX completion path. Depending on gro_flush_timeout and napi_defer_hard_irqs at gives up to 30% CPU utilization reduction: gro_flush_timeout=50000 napi_defer_hard_irqs=2 netperf -l 10 -H 192.168.1.1 -t UDP_STREAM -c -C -- -m 1470 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 () port 0 AF_INET Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB before: 212992 1470 10.00 809632 0 952.0 42.98 14.792 212992 10.00 809630 952.0 50.66 8.719 after: 212992 1470 10.00 813686 0 956.8 32.14 11.009 212992 10.00 813686 956.8 50.05 8.570 [1] https://lore.kernel.org/netdev/20200422161329.56026-1-edumazet@google.com/ Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
47bfc4d128
commit
3bacbe0425
|
@ -1086,13 +1086,13 @@ static int am65_cpsw_nuss_tx_poll(struct napi_struct *napi_tx, int budget)
|
|||
else
|
||||
num_tx = am65_cpsw_nuss_tx_compl_packets(tx_chn->common, tx_chn->id, budget);
|
||||
|
||||
num_tx = min(num_tx, budget);
|
||||
if (num_tx < budget) {
|
||||
napi_complete(napi_tx);
|
||||
enable_irq(tx_chn->irq);
|
||||
}
|
||||
if (num_tx >= budget)
|
||||
return budget;
|
||||
|
||||
return num_tx;
|
||||
if (napi_complete_done(napi_tx, num_tx))
|
||||
enable_irq(tx_chn->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t am65_cpsw_nuss_rx_irq(int irq, void *dev_id)
|
||||
|
|
Loading…
Reference in New Issue