Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
 "Except for the ahci fix that fixes a boot issue, nothing major in this
  pull request. Some new platform controller support and device specific
  changes"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: zpodd: make arrays cdb static, reduces object code size
  ahci: don't use MSI for devices with the silly Intel NVMe remapping scheme
  dt-bindings: ata: add DT bindings for MediaTek SATA controller
  ata: mediatek: add support for MediaTek SATA controller
  pata_octeon_cf: use of_property_read_{bool|u32}()
  cs5536: add support for IDE controller variant
  ata: sata_gemini: Introduce explicit IDE pin control
  ata: sata_gemini: Retire custom pin control
  ata: ahci_platform: Add shutdown handler
  ata: sata_gemini: explicitly request exclusive reset control
  ata: Drop unnecessary static
  ata: Convert to using %pOF instead of full_name

Documentation/devicetree/bindings/ata/ahci-mtk.txt

@@ -0,0 +1,51 @@
+MediaTek Serial ATA controller
+
+Required properties:
+ - compatible	   : Must be "mediatek,<chip>-ahci", "mediatek,mtk-ahci".
+		     When using "mediatek,mtk-ahci" compatible strings, you
+		     need SoC specific ones in addition, one of:
+		     - "mediatek,mt7622-ahci"
+ - reg		   : Physical base addresses and length of register sets.
+ - interrupts	   : Interrupt associated with the SATA device.
+ - interrupt-names : Associated name must be: "hostc".
+ - clocks	   : A list of phandle and clock specifier pairs, one for each
+		     entry in clock-names.
+ - clock-names	   : Associated names must be: "ahb", "axi", "asic", "rbc", "pm".
+ - phys		   : A phandle and PHY specifier pair for the PHY port.
+ - phy-names	   : Associated name must be: "sata-phy".
+ - ports-implemented : See ./ahci-platform.txt for details.
+
+Optional properties:
+ - power-domains   : A phandle and power domain specifier pair to the power
+		     domain which is responsible for collapsing and restoring
+		     power to the peripheral.
+ - resets	   : Must contain an entry for each entry in reset-names.
+		     See ../reset/reset.txt for details.
+ - reset-names	   : Associated names must be: "axi", "sw", "reg".
+ - mediatek,phy-mode : A phandle to the system controller, used to enable
+		       SATA function.
+
+Example:
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mt7622-ahci",
+			     "mediatek,mtk-ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&u3port1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+	};

drivers/ata/Kconfig

@@ -153,6 +153,16 @@ config AHCI_CEVA
 
 	  If unsure, say N.
 
+config AHCI_MTK
+	tristate "MediaTek AHCI SATA support"
+	depends on ARCH_MEDIATEK
+	select MFD_SYSCON
+	help
+	  This option enables support for the MediaTek SoC's
+	  onboard AHCI SATA controller.
+
+	  If unsure, say N.
+
 config AHCI_MVEBU
 	tristate "Marvell EBU AHCI SATA support"
 	depends on ARCH_MVEBU

drivers/ata/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_AHCI_CEVA)		+= ahci_ceva.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DA850)	+= ahci_da850.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_DM816)	+= ahci_dm816.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_MTK)		+= ahci_mtk.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_MVEBU)	+= ahci_mvebu.o libahci.o libahci_platform.o
 obj-$(CONFIG_AHCI_OCTEON)	+= ahci_octeon.o
 obj-$(CONFIG_AHCI_SUNXI)	+= ahci_sunxi.o libahci.o libahci_platform.o

drivers/ata/ahci.c

@@ -1469,7 +1469,14 @@ static void ahci_remap_check(struct pci_dev *pdev, int bar,
 		return;
 
 	dev_warn(&pdev->dev, "Found %d remapped NVMe devices.\n", count);
-	dev_warn(&pdev->dev, "Switch your BIOS from RAID to AHCI mode to use them.\n");
+	dev_warn(&pdev->dev,
+		 "Switch your BIOS from RAID to AHCI mode to use them.\n");
+
+	/*
+	 * Don't rely on the msi-x capability in the remap case,
+	 * share the legacy interrupt across ahci and remapped devices.
+	 */
+	hpriv->flags |= AHCI_HFLAG_NO_MSI;
 }
 
 static int ahci_get_irq_vector(struct ata_host *host, int port)

drivers/ata/ahci_mtk.c

@@ -0,0 +1,196 @@
+/*
+ * MeidaTek AHCI SATA driver
+ *
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include "ahci.h"
+
+#define DRV_NAME		"ahci"
+
+#define SYS_CFG			0x14
+#define SYS_CFG_SATA_MSK	GENMASK(31, 30)
+#define SYS_CFG_SATA_EN		BIT(31)
+
+struct mtk_ahci_plat {
+	struct regmap *mode;
+	struct reset_control *axi_rst;
+	struct reset_control *sw_rst;
+	struct reset_control *reg_rst;
+};
+
+static const struct ata_port_info ahci_port_info = {
+	.flags		= AHCI_FLAG_COMMON,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_platform_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int mtk_ahci_platform_resets(struct ahci_host_priv *hpriv,
+				    struct device *dev)
+{
+	struct mtk_ahci_plat *plat = hpriv->plat_data;
+	int err;
+
+	/* reset AXI bus and PHY part */
+	plat->axi_rst = devm_reset_control_get_optional_exclusive(dev, "axi");
+	if (PTR_ERR(plat->axi_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->axi_rst);
+
+	plat->sw_rst = devm_reset_control_get_optional_exclusive(dev, "sw");
+	if (PTR_ERR(plat->sw_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->sw_rst);
+
+	plat->reg_rst = devm_reset_control_get_optional_exclusive(dev, "reg");
+	if (PTR_ERR(plat->reg_rst) == -EPROBE_DEFER)
+		return PTR_ERR(plat->reg_rst);
+
+	err = reset_control_assert(plat->axi_rst);
+	if (err) {
+		dev_err(dev, "failed to assert AXI bus\n");
+		return err;
+	}
+
+	err = reset_control_assert(plat->sw_rst);
+	if (err) {
+		dev_err(dev, "failed to assert PHY digital part\n");
+		return err;
+	}
+
+	err = reset_control_assert(plat->reg_rst);
+	if (err) {
+		dev_err(dev, "failed to assert PHY register part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->reg_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert PHY register part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->sw_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert PHY digital part\n");
+		return err;
+	}
+
+	err = reset_control_deassert(plat->axi_rst);
+	if (err) {
+		dev_err(dev, "failed to deassert AXI bus\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int mtk_ahci_parse_property(struct ahci_host_priv *hpriv,
+				   struct device *dev)
+{
+	struct mtk_ahci_plat *plat = hpriv->plat_data;
+	struct device_node *np = dev->of_node;
+
+	/* enable SATA function if needed */
+	if (of_find_property(np, "mediatek,phy-mode", NULL)) {
+		plat->mode = syscon_regmap_lookup_by_phandle(
+					np, "mediatek,phy-mode");
+		if (IS_ERR(plat->mode)) {
+			dev_err(dev, "missing phy-mode phandle\n");
+			return PTR_ERR(plat->mode);
+		}
+
+		regmap_update_bits(plat->mode, SYS_CFG, SYS_CFG_SATA_MSK,
+				   SYS_CFG_SATA_EN);
+	}
+
+	of_property_read_u32(np, "ports-implemented", &hpriv->force_port_map);
+
+	return 0;
+}
+
+static int mtk_ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_ahci_plat *plat;
+	struct ahci_host_priv *hpriv;
+	int err;
+
+	plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return -ENOMEM;
+
+	hpriv = ahci_platform_get_resources(pdev);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	hpriv->plat_data = plat;
+
+	err = mtk_ahci_parse_property(hpriv, dev);
+	if (err)
+		return err;
+
+	err = mtk_ahci_platform_resets(hpriv, dev);
+	if (err)
+		return err;
+
+	err = ahci_platform_enable_resources(hpriv);
+	if (err)
+		return err;
+
+	err = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+				      &ahci_platform_sht);
+	if (err)
+		goto disable_resources;
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return err;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+			 ahci_platform_resume);
+
+static const struct of_device_id ahci_of_match[] = {
+	{ .compatible = "mediatek,mtk-ahci", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static struct platform_driver mtk_ahci_driver = {
+	.probe = mtk_ahci_probe,
+	.remove = ata_platform_remove_one,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ahci_of_match,
+		.pm = &ahci_pm_ops,
+	},
+};
+module_platform_driver(mtk_ahci_driver);
+
+MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver");
+MODULE_LICENSE("GPL v2");

drivers/ata/ahci_platform.c

@@ -93,6 +93,7 @@ MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
 static struct platform_driver ahci_driver = {
 	.probe = ahci_probe,
 	.remove = ata_platform_remove_one,
+	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,

drivers/ata/libahci_platform.c

@@ -602,6 +602,40 @@ static void ahci_host_stop(struct ata_host *host)
 	ahci_platform_disable_resources(hpriv);
 }
 
+/**
+ * ahci_platform_shutdown - Disable interrupts and stop DMA for host ports
+ * @dev: platform device pointer for the host
+ *
+ * This function is called during system shutdown and performs the minimal
+ * deconfiguration required to ensure that an ahci_platform host cannot
+ * corrupt or otherwise interfere with a new kernel being started with kexec.
+ */
+void ahci_platform_shutdown(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	int i;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		/* Disable port interrupts */
+		if (ap->ops->freeze)
+			ap->ops->freeze(ap);
+
+		/* Stop the port DMA engines */
+		if (ap->ops->port_stop)
+			ap->ops->port_stop(ap);
+	}
+
+	/* Disable and clear host interrupts */
+	writel(readl(mmio + HOST_CTL) & ~HOST_IRQ_EN, mmio + HOST_CTL);
+	readl(mmio + HOST_CTL); /* flush */
+	writel(GENMASK(host->n_ports, 0), mmio + HOST_IRQ_STAT);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_shutdown);
+
 #ifdef CONFIG_PM_SLEEP
 /**
  * ahci_platform_suspend_host - Suspend an ahci-platform host

drivers/ata/libata-zpodd.c

@@ -34,7 +34,7 @@ struct zpodd {
 static int eject_tray(struct ata_device *dev)
 {
 	struct ata_taskfile tf;
-	const char cdb[] = {  GPCMD_START_STOP_UNIT,
+	static const char cdb[] = {  GPCMD_START_STOP_UNIT,
 		0, 0, 0,
 		0x02,     /* LoEj */
 		0, 0, 0, 0, 0, 0, 0,
@@ -55,7 +55,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 	unsigned int ret;
 	struct rm_feature_desc *desc = (void *)(buf + 8);
 	struct ata_taskfile tf;
-	char cdb[] = {  GPCMD_GET_CONFIGURATION,
+	static const char cdb[] = {  GPCMD_GET_CONFIGURATION,
 			2,      /* only 1 feature descriptor requested */
 			0, 3,   /* 3, removable medium feature */
 			0, 0, 0,/* reserved */

drivers/ata/pata_amd.c

@@ -616,6 +616,7 @@ static const struct pci_device_id amd[] = {
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE),	8 },
 	{ PCI_VDEVICE(NVIDIA,	PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE),	8 },
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE),		9 },
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_DEV_IDE),	9 },
 
 	{ },
 };

drivers/ata/pata_cs5536.c

@@ -289,6 +289,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 static const struct pci_device_id cs5536[] = {
 	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE), },
+	{ PCI_VDEVICE(AMD,	PCI_DEVICE_ID_AMD_CS5536_DEV_IDE), },
 	{ },
 };
 

drivers/ata/pata_octeon_cf.c

@@ -840,7 +840,6 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	struct property *reg_prop;
 	int n_addr, n_size, reg_len;
 	struct device_node *node;
-	const void *prop;
 	void __iomem *cs0;
 	void __iomem *cs1 = NULL;
 	struct ata_host *host;
@@ -850,7 +849,7 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	void __iomem *base;
 	struct octeon_cf_port *cf_port;
 	int rv = -ENOMEM;
-
+	u32 bus_width;
 
 	node = pdev->dev.of_node;
 	if (node == NULL)
@@ -860,11 +859,10 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	if (!cf_port)
 		return -ENOMEM;
 
-	cf_port->is_true_ide = (of_find_property(node, "cavium,true-ide", NULL) != NULL);
+	cf_port->is_true_ide = of_property_read_bool(node, "cavium,true-ide");
 
-	prop = of_get_property(node, "cavium,bus-width", NULL);
-	if (prop)
-		is_16bit = (be32_to_cpup(prop) == 16);
+	if (of_property_read_u32(node, "cavium,bus-width", &bus_width) == 0)
+		is_16bit = (bus_width == 16);
 	else
 		is_16bit = false;
 

drivers/ata/sata_gemini.c

@@ -15,6 +15,7 @@
 #include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/pinctrl/consumer.h>
 #include "sata_gemini.h"
 
 #define DRV_NAME "gemini_sata_bridge"
@@ -43,17 +44,6 @@ struct sata_gemini {
 	struct clk *sata1_pclk;
 };
 
-/* Global IDE PAD Skew Control Register */
-#define GEMINI_GLOBAL_IDE_SKEW_CTRL		0x18
-#define GEMINI_IDE1_HOST_STROBE_DELAY_SHIFT	28
-#define GEMINI_IDE1_DEVICE_STROBE_DELAY_SHIFT	24
-#define GEMINI_IDE1_OUTPUT_IO_SKEW_SHIFT	20
-#define GEMINI_IDE1_INPUT_IO_SKEW_SHIFT		16
-#define GEMINI_IDE0_HOST_STROBE_DELAY_SHIFT	12
-#define GEMINI_IDE0_DEVICE_STROBE_DELAY_SHIFT	8
-#define GEMINI_IDE0_OUTPUT_IO_SKEW_SHIFT	4
-#define GEMINI_IDE0_INPUT_IO_SKEW_SHIFT		0
-
 /* Miscellaneous Control Register */
 #define GEMINI_GLOBAL_MISC_CTRL		0x30
 /*
@@ -91,8 +81,6 @@ struct sata_gemini {
 #define GEMINI_IDE_IOMUX_MODE2			(2 << 24)
 #define GEMINI_IDE_IOMUX_MODE3			(3 << 24)
 #define GEMINI_IDE_IOMUX_SHIFT			(24)
-#define GEMINI_IDE_PADS_ENABLE			BIT(4)
-#define GEMINI_PFLASH_PADS_DISABLE		BIT(1)
 
 /*
  * Registers directly controlling the PATA<->SATA adapters
@@ -274,14 +262,14 @@ static int gemini_sata_bridge_init(struct sata_gemini *sg)
 		return ret;
 	}
 
-	sg->sata0_reset = devm_reset_control_get(dev, "sata0");
+	sg->sata0_reset = devm_reset_control_get_exclusive(dev, "sata0");
 	if (IS_ERR(sg->sata0_reset)) {
 		dev_err(dev, "no SATA0 reset controller\n");
 		clk_disable_unprepare(sg->sata1_pclk);
 		clk_disable_unprepare(sg->sata0_pclk);
 		return PTR_ERR(sg->sata0_reset);
 	}
-	sg->sata1_reset = devm_reset_control_get(dev, "sata1");
+	sg->sata1_reset = devm_reset_control_get_exclusive(dev, "sata1");
 	if (IS_ERR(sg->sata1_reset)) {
 		dev_err(dev, "no SATA1 reset controller\n");
 		clk_disable_unprepare(sg->sata1_pclk);
@@ -300,17 +288,39 @@ static int gemini_sata_bridge_init(struct sata_gemini *sg)
 	return 0;
 }
 
+static int gemini_setup_ide_pins(struct device *dev)
+{
+	struct pinctrl *p;
+	struct pinctrl_state *ide_state;
+	int ret;
+
+	p = devm_pinctrl_get(dev);
+	if (IS_ERR(p))
+		return PTR_ERR(p);
+
+	ide_state = pinctrl_lookup_state(p, "ide");
+	if (IS_ERR(ide_state))
+		return PTR_ERR(ide_state);
+
+	ret = pinctrl_select_state(p, ide_state);
+	if (ret) {
+		dev_err(dev, "could not select IDE state\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int gemini_sata_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct sata_gemini *sg;
-	static struct regmap *map;
+	struct regmap *map;
 	struct resource *res;
 	enum gemini_muxmode muxmode;
 	u32 gmode;
 	u32 gmask;
-	u32 val;
 	int ret;
 
 	sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL);
@@ -362,16 +372,6 @@ static int gemini_sata_probe(struct platform_device *pdev)
 	gmask = GEMINI_IDE_IOMUX_MASK;
 	gmode = (muxmode << GEMINI_IDE_IOMUX_SHIFT);
 
-	/*
-	 * If we mux out the IDE, parallel flash must be disabled.
-	 * SATA0 and SATA1 have dedicated pins and may coexist with
-	 * parallel flash.
-	 */
-	if (sg->ide_pins)
-		gmode |= GEMINI_IDE_PADS_ENABLE | GEMINI_PFLASH_PADS_DISABLE;
-	else
-		gmask |= GEMINI_IDE_PADS_ENABLE;
-
 	ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, gmask, gmode);
 	if (ret) {
 		dev_err(dev, "unable to set up IDE muxing\n");
@@ -379,14 +379,15 @@ static int gemini_sata_probe(struct platform_device *pdev)
 		goto out_unprep_clk;
 	}
 
-	/* FIXME: add more elaborate IDE skew control handling */
+	/*
+	 * Route out the IDE pins if desired.
+	 * This is done by looking up a special pin control state called
+	 * "ide" that will route out the IDE pins.
+	 */
 	if (sg->ide_pins) {
-		ret = regmap_read(map, GEMINI_GLOBAL_IDE_SKEW_CTRL, &val);
-		if (ret) {
-			dev_err(dev, "cannot read IDE skew control register\n");
+		ret = gemini_setup_ide_pins(dev);
+		if (ret)
 			return ret;
-		}
-		dev_info(dev, "IDE skew control: %08x\n", val);
 	}
 
 	dev_info(dev, "set up the Gemini IDE/SATA nexus\n");

drivers/ata/sata_svw.c

@@ -339,7 +339,7 @@ static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost)
 		if (!reg)
 			continue;
 		if (index == *reg) {
-			seq_printf(m, "devspec: %s\n", np->full_name);
+			seq_printf(m, "devspec: %pOF\n", np);
 			break;
 		}
 	}

include/linux/ahci_platform.h

@@ -36,6 +36,8 @@ int ahci_platform_init_host(struct platform_device *pdev,
 			    const struct ata_port_info *pi_template,
 			    struct scsi_host_template *sht);
 
+void ahci_platform_shutdown(struct platform_device *pdev);
+
 int ahci_platform_suspend_host(struct device *dev);
 int ahci_platform_resume_host(struct device *dev);
 int ahci_platform_suspend(struct device *dev);

include/linux/pci_ids.h

@@ -576,6 +576,7 @@
 #define PCI_DEVICE_ID_AMD_CS5536_EHC    0x2095
 #define PCI_DEVICE_ID_AMD_CS5536_UDC    0x2096
 #define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
+#define PCI_DEVICE_ID_AMD_CS5536_DEV_IDE    0x2092
 #define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
 #define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
 #define PCI_DEVICE_ID_AMD_LX_AES    0x2082