UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

net: farsync: code indent use tabs where possible 

Code indent should use tabs where possible.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Peng Li 2021-06-08 16:12:34 +08:00 committed by David S. Miller
parent d70711da30
commit 3a950181f6
1 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
drivers/net/wan/farsync.c
View File

@ -422,7 +422,7 @@ struct buf_window {
/* Per port (line or channel) information
*/
struct fst_port_info {
struct net_device *dev; /* Device struct - must be first */
struct net_device *dev; /* Device struct - must be first */
struct fst_card_info *card; /* Card we're associated with */
int index; /* Port index on the card */
int hwif; /* Line hardware (lineInterface copy) */
@ -786,7 +786,7 @@ fst_init_dma(struct fst_card_info *card)
/* This is only required for the PLX 9054
*/
if (card->family == FST_FAMILY_TXU) {
pci_set_master(card->device);
pci_set_master(card->device);
outl(0x00020441, card->pci_conf + DMAMODE0);
outl(0x00020441, card->pci_conf + DMAMODE1);
outl(0x0, card->pci_conf + DMATHR);
@ -1561,7 +1561,7 @@ fst_intr(int dummy, void *dev_id)
rdidx = 0;
}
FST_WRB(card, interruptEvent.rdindex, rdidx);
return IRQ_HANDLED;
return IRQ_HANDLED;
}
/* Check that the shared memory configuration is one that we can handle
@ -2129,7 +2129,7 @@ fst_open(struct net_device *dev)
port = dev_to_port(dev);
if (!try_module_get(THIS_MODULE))
return -EBUSY;
return -EBUSY;
if (port->mode != FST_RAW) {
err = hdlc_open(dev);
@ -2421,9 +2421,9 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
(ent->driver_data == FST_TYPE_T2U)) ? 2 : 4;
card->state = FST_UNINIT;
spin_lock_init ( &card->card_lock );
spin_lock_init(&card->card_lock);
for ( i = 0 ; i < card->nports ; i++ ) {
for (i = 0; i < card->nports; i++) {
struct net_device *dev = alloc_hdlcdev(&card->ports[i]);
hdlc_device *hdlc;
@ -2435,29 +2435,29 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto hdlcdev_fail;
}
card->ports[i].dev = dev;
card->ports[i].card = card;
card->ports[i].index = i;
card->ports[i].run = 0;
card->ports[i].card = card;
card->ports[i].index = i;
card->ports[i].run = 0;
hdlc = dev_to_hdlc(dev);
/* Fill in the net device info */
/* Fill in the net device info */
/* Since this is a PCI setup this is purely
* informational. Give them the buffer addresses
* and basic card I/O.
*/
dev->mem_start = card->phys_mem
+ BUF_OFFSET ( txBuffer[i][0][0]);
dev->mem_end = card->phys_mem
+ BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]);
dev->base_addr = card->pci_conf;
dev->irq = card->irq;
dev->mem_start = card->phys_mem
+ BUF_OFFSET(txBuffer[i][0][0]);
dev->mem_end = card->phys_mem
+ BUF_OFFSET(txBuffer[i][NUM_TX_BUFFER - 1][LEN_RX_BUFFER - 1]);
dev->base_addr = card->pci_conf;
dev->irq = card->irq;
dev->netdev_ops = &fst_ops;
dev->tx_queue_len = FST_TX_QUEUE_LEN;
dev->watchdog_timeo = FST_TX_TIMEOUT;
hdlc->attach = fst_attach;
hdlc->xmit = fst_start_xmit;
hdlc->attach = fst_attach;
hdlc->xmit = fst_start_xmit;
}
card->device = pdev;