From 39c341a8dcf060b246b0beddac90cd7de11d4a20 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 5 Feb 2008 00:02:17 +0000
Subject: [PATCH] DM9000: Fix delays used by EEPROM read and write

The code was using a delay of 8ms, when it should have been
using the EEPROM status flag from the device to indicate the
EEPROM transaction had finished.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/dm9000.c | 54 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 851618338b2e..1d790a8e3a98 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1048,6 +1048,50 @@ dm9000_rx(struct net_device *dev)
 	} while (rxbyte == DM9000_PKT_RDY);
 }
 
+static unsigned int
+dm9000_read_locked(board_info_t *db, int reg)
+{
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&db->lock, flags);
+	ret = ior(db, reg);
+	spin_unlock_irqrestore(&db->lock, flags);
+
+	return ret;
+}
+
+static int dm9000_wait_eeprom(board_info_t *db)
+{
+	unsigned int status;
+	int timeout = 8;	/* wait max 8msec */
+
+	/* The DM9000 data sheets say we should be able to
+	 * poll the ERRE bit in EPCR to wait for the EEPROM
+	 * operation. From testing several chips, this bit
+	 * does not seem to work. 
+	 *
+	 * We attempt to use the bit, but fall back to the
+	 * timeout (which is why we do not return an error
+	 * on expiry) to say that the EEPROM operation has
+	 * completed.
+	 */
+
+	while (1) {
+		status = dm9000_read_locked(db, DM9000_EPCR);
+
+		if ((status & EPCR_ERRE) == 0)
+			break;
+
+		if (timeout-- < 0) {
+			dev_dbg(db->dev, "timeout waiting EEPROM\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+
 /*
  *  Read a word data from EEPROM
  */
@@ -1065,8 +1109,10 @@ dm9000_read_eeprom(board_info_t *db, int offset, u8 *to)
 
 	spin_unlock_irqrestore(&db->lock, flags);
 
-	mdelay(8);		/* according to the datasheet 200us should be enough,
-				   but it doesn't work */
+	dm9000_wait_eeprom(db);
+
+	/* delay for at-least 150uS */
+	msleep(1);
 
 	spin_lock_irqsave(&db->lock, flags);
 
@@ -1097,7 +1143,9 @@ dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
 	iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW);
 	spin_unlock_irqrestore(&db->lock, flags);
 
-	mdelay(8);		/* same shit */
+	dm9000_wait_eeprom(db);
+
+	mdelay(1);	/* wait at least 150uS to clear */
 
 	spin_lock_irqsave(&db->lock, flags);
 	iow(db, DM9000_EPCR, 0);