ixgbe: use netif_<level> instead of netdev_<level>
This patch restores the ability to set msglvl through ethtool.
The issue was introduced by:
commit 849c45423c
CC: Joe Perches <joe@perches.com>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
4478a9cdf0
commit
396e799c3a
|
@ -715,7 +715,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
|
|||
|
||||
out:
|
||||
if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
|
||||
e_info("Smartspeed has downgraded the link speed from "
|
||||
e_info(hw, "Smartspeed has downgraded the link speed from "
|
||||
"the maximum advertised\n");
|
||||
return status;
|
||||
}
|
||||
|
|
|
@ -108,16 +108,6 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
|
|||
extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
|
||||
#define hw_dbg(hw, format, arg...) \
|
||||
netdev_dbg(ixgbe_get_hw_dev(hw), format, ##arg)
|
||||
#define e_err(format, arg...) \
|
||||
netdev_err(adapter->netdev, format, ## arg)
|
||||
#define e_info(format, arg...) \
|
||||
netdev_info(adapter->netdev, format, ## arg)
|
||||
#define e_warn(format, arg...) \
|
||||
netdev_warn(adapter->netdev, format, ## arg)
|
||||
#define e_notice(format, arg...) \
|
||||
netdev_notice(adapter->netdev, format, ## arg)
|
||||
#define e_crit(format, arg...) \
|
||||
netdev_crit(adapter->netdev, format, ## arg)
|
||||
#define e_dev_info(format, arg...) \
|
||||
dev_info(&adapter->pdev->dev, format, ## arg)
|
||||
#define e_dev_warn(format, arg...) \
|
||||
|
@ -126,5 +116,12 @@ extern struct net_device *ixgbe_get_hw_dev(struct ixgbe_hw *hw);
|
|||
dev_err(&adapter->pdev->dev, format, ## arg)
|
||||
#define e_dev_notice(format, arg...) \
|
||||
dev_notice(&adapter->pdev->dev, format, ## arg)
|
||||
|
||||
#define e_info(msglvl, format, arg...) \
|
||||
netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
|
||||
#define e_err(msglvl, format, arg...) \
|
||||
netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
|
||||
#define e_warn(msglvl, format, arg...) \
|
||||
netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
|
||||
#define e_crit(msglvl, format, arg...) \
|
||||
netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
|
||||
#endif /* IXGBE_COMMON */
|
||||
|
|
|
@ -121,7 +121,7 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
|
|||
goto out;
|
||||
|
||||
if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
|
||||
e_err("Enable failed, needs MSI-X\n");
|
||||
e_err(drv, "Enable failed, needs MSI-X\n");
|
||||
err = 1;
|
||||
goto out;
|
||||
}
|
||||
|
|
|
@ -301,7 +301,7 @@ static int ixgbe_set_settings(struct net_device *netdev,
|
|||
hw->mac.autotry_restart = true;
|
||||
err = hw->mac.ops.setup_link(hw, advertised, true, true);
|
||||
if (err) {
|
||||
e_info("setup link failed with code %d\n", err);
|
||||
e_info(probe, "setup link failed with code %d\n", err);
|
||||
hw->mac.ops.setup_link(hw, old, true, true);
|
||||
}
|
||||
} else {
|
||||
|
@ -1194,7 +1194,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
|
|||
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
|
||||
val = readl(adapter->hw.hw_addr + R); \
|
||||
if (val != (_test[pat] & W & M)) { \
|
||||
e_err("pattern test reg %04X failed: got " \
|
||||
e_err(drv, "pattern test reg %04X failed: got " \
|
||||
"0x%08X expected 0x%08X\n", \
|
||||
R, val, (_test[pat] & W & M)); \
|
||||
*data = R; \
|
||||
|
@ -1212,7 +1212,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
|
|||
writel((W & M), (adapter->hw.hw_addr + R)); \
|
||||
val = readl(adapter->hw.hw_addr + R); \
|
||||
if ((W & M) != (val & M)) { \
|
||||
e_err("set/check reg %04X test failed: got 0x%08X " \
|
||||
e_err(drv, "set/check reg %04X test failed: got 0x%08X " \
|
||||
"expected 0x%08X\n", R, (val & M), (W & M)); \
|
||||
*data = R; \
|
||||
writel(before, (adapter->hw.hw_addr + R)); \
|
||||
|
@ -1246,8 +1246,8 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
|
|||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
|
||||
after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
|
||||
if (value != after) {
|
||||
e_err("failed STATUS register test got: 0x%08X expected: "
|
||||
"0x%08X\n", after, value);
|
||||
e_err(drv, "failed STATUS register test got: 0x%08X "
|
||||
"expected: 0x%08X\n", after, value);
|
||||
*data = 1;
|
||||
return 1;
|
||||
}
|
||||
|
@ -1347,7 +1347,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
|
|||
*data = 1;
|
||||
return -1;
|
||||
}
|
||||
e_info("testing %s interrupt\n", shared_int ?
|
||||
e_info(hw, "testing %s interrupt\n", shared_int ?
|
||||
"shared" : "unshared");
|
||||
|
||||
/* Disable all the interrupts */
|
||||
|
@ -1853,7 +1853,7 @@ static void ixgbe_diag_test(struct net_device *netdev,
|
|||
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
|
||||
/* Offline tests */
|
||||
|
||||
e_info("offline testing starting\n");
|
||||
e_info(hw, "offline testing starting\n");
|
||||
|
||||
/* Link test performed before hardware reset so autoneg doesn't
|
||||
* interfere with test result */
|
||||
|
@ -1886,17 +1886,17 @@ static void ixgbe_diag_test(struct net_device *netdev,
|
|||
else
|
||||
ixgbe_reset(adapter);
|
||||
|
||||
e_info("register testing starting\n");
|
||||
e_info(hw, "register testing starting\n");
|
||||
if (ixgbe_reg_test(adapter, &data[0]))
|
||||
eth_test->flags |= ETH_TEST_FL_FAILED;
|
||||
|
||||
ixgbe_reset(adapter);
|
||||
e_info("eeprom testing starting\n");
|
||||
e_info(hw, "eeprom testing starting\n");
|
||||
if (ixgbe_eeprom_test(adapter, &data[1]))
|
||||
eth_test->flags |= ETH_TEST_FL_FAILED;
|
||||
|
||||
ixgbe_reset(adapter);
|
||||
e_info("interrupt testing starting\n");
|
||||
e_info(hw, "interrupt testing starting\n");
|
||||
if (ixgbe_intr_test(adapter, &data[2]))
|
||||
eth_test->flags |= ETH_TEST_FL_FAILED;
|
||||
|
||||
|
@ -1904,13 +1904,14 @@ static void ixgbe_diag_test(struct net_device *netdev,
|
|||
* loopback diagnostic. */
|
||||
if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
|
||||
IXGBE_FLAG_VMDQ_ENABLED)) {
|
||||
e_info("Skip MAC loopback diagnostic in VT mode\n");
|
||||
e_info(hw, "Skip MAC loopback diagnostic in VT "
|
||||
"mode\n");
|
||||
data[3] = 0;
|
||||
goto skip_loopback;
|
||||
}
|
||||
|
||||
ixgbe_reset(adapter);
|
||||
e_info("loopback testing starting\n");
|
||||
e_info(hw, "loopback testing starting\n");
|
||||
if (ixgbe_loopback_test(adapter, &data[3]))
|
||||
eth_test->flags |= ETH_TEST_FL_FAILED;
|
||||
|
||||
|
@ -1921,7 +1922,7 @@ skip_loopback:
|
|||
if (if_running)
|
||||
dev_open(netdev);
|
||||
} else {
|
||||
e_info("online testing starting\n");
|
||||
e_info(hw, "online testing starting\n");
|
||||
/* Online tests */
|
||||
if (ixgbe_link_test(adapter, &data[4]))
|
||||
eth_test->flags |= ETH_TEST_FL_FAILED;
|
||||
|
@ -2139,7 +2140,8 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
|
|||
adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
|
||||
if (netdev->features & NETIF_F_LRO) {
|
||||
netdev->features &= ~NETIF_F_LRO;
|
||||
e_info("rx-usecs set to 0, disabling RSC\n");
|
||||
e_info(probe, "rx-usecs set to 0, "
|
||||
"disabling RSC\n");
|
||||
}
|
||||
need_reset = true;
|
||||
}
|
||||
|
@ -2239,7 +2241,7 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
|
|||
} else if (!adapter->rx_itr_setting) {
|
||||
netdev->features &= ~NETIF_F_LRO;
|
||||
if (data & ETH_FLAG_LRO)
|
||||
e_info("rx-usecs set to 0, "
|
||||
e_info(probe, "rx-usecs set to 0, "
|
||||
"LRO/RSC cannot be enabled.\n");
|
||||
}
|
||||
}
|
||||
|
|
|
@ -164,19 +164,19 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
|
|||
|
||||
adapter = netdev_priv(netdev);
|
||||
if (xid >= IXGBE_FCOE_DDP_MAX) {
|
||||
e_warn("xid=0x%x out-of-range\n", xid);
|
||||
e_warn(drv, "xid=0x%x out-of-range\n", xid);
|
||||
return 0;
|
||||
}
|
||||
|
||||
fcoe = &adapter->fcoe;
|
||||
if (!fcoe->pool) {
|
||||
e_warn("xid=0x%x no ddp pool for fcoe\n", xid);
|
||||
e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
|
||||
return 0;
|
||||
}
|
||||
|
||||
ddp = &fcoe->ddp[xid];
|
||||
if (ddp->sgl) {
|
||||
e_err("xid 0x%x w/ non-null sgl=%p nents=%d\n",
|
||||
e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
|
||||
xid, ddp->sgl, ddp->sgc);
|
||||
return 0;
|
||||
}
|
||||
|
@ -185,14 +185,14 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
|
|||
/* setup dma from scsi command sgl */
|
||||
dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
|
||||
if (dmacount == 0) {
|
||||
e_err("xid 0x%x DMA map error\n", xid);
|
||||
e_err(drv, "xid 0x%x DMA map error\n", xid);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* alloc the udl from our ddp pool */
|
||||
ddp->udl = pci_pool_alloc(fcoe->pool, GFP_KERNEL, &ddp->udp);
|
||||
if (!ddp->udl) {
|
||||
e_err("failed allocated ddp context\n");
|
||||
e_err(drv, "failed allocated ddp context\n");
|
||||
goto out_noddp_unmap;
|
||||
}
|
||||
ddp->sgl = sgl;
|
||||
|
@ -205,7 +205,7 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
|
|||
while (len) {
|
||||
/* max number of buffers allowed in one DDP context */
|
||||
if (j >= IXGBE_BUFFCNT_MAX) {
|
||||
e_err("xid=%x:%d,%d,%d:addr=%llx "
|
||||
e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
|
||||
"not enough descriptors\n",
|
||||
xid, i, j, dmacount, (u64)addr);
|
||||
goto out_noddp_free;
|
||||
|
@ -385,7 +385,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
|
|||
struct fc_frame_header *fh;
|
||||
|
||||
if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
|
||||
e_err("Wrong gso type %d:expecting SKB_GSO_FCOE\n",
|
||||
e_err(drv, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
|
||||
skb_shinfo(skb)->gso_type);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -412,7 +412,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
|
|||
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_SOF;
|
||||
break;
|
||||
default:
|
||||
e_warn("unknown sof = 0x%x\n", sof);
|
||||
e_warn(drv, "unknown sof = 0x%x\n", sof);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -439,7 +439,7 @@ int ixgbe_fso(struct ixgbe_adapter *adapter,
|
|||
fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
|
||||
break;
|
||||
default:
|
||||
e_warn("unknown eof = 0x%x\n", eof);
|
||||
e_warn(drv, "unknown eof = 0x%x\n", eof);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -515,7 +515,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
|
|||
adapter->pdev, IXGBE_FCPTR_MAX,
|
||||
IXGBE_FCPTR_ALIGN, PAGE_SIZE);
|
||||
if (!fcoe->pool)
|
||||
e_err("failed to allocated FCoE DDP pool\n");
|
||||
e_err(drv, "failed to allocated FCoE DDP pool\n");
|
||||
|
||||
spin_lock_init(&fcoe->lock);
|
||||
}
|
||||
|
@ -611,7 +611,7 @@ int ixgbe_fcoe_enable(struct net_device *netdev)
|
|||
if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
|
||||
goto out_enable;
|
||||
|
||||
e_info("Enabling FCoE offload features.\n");
|
||||
e_info(drv, "Enabling FCoE offload features.\n");
|
||||
if (netif_running(netdev))
|
||||
netdev->netdev_ops->ndo_stop(netdev);
|
||||
|
||||
|
@ -657,7 +657,7 @@ int ixgbe_fcoe_disable(struct net_device *netdev)
|
|||
if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
|
||||
goto out_disable;
|
||||
|
||||
e_info("Disabling FCoE offload features.\n");
|
||||
e_info(drv, "Disabling FCoE offload features.\n");
|
||||
if (netif_running(netdev))
|
||||
netdev->netdev_ops->ndo_stop(netdev);
|
||||
|
||||
|
|
|
@ -696,7 +696,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
|
|||
/* detected Tx unit hang */
|
||||
union ixgbe_adv_tx_desc *tx_desc;
|
||||
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
|
||||
e_err("Detected Tx Unit Hang\n"
|
||||
e_err(drv, "Detected Tx Unit Hang\n"
|
||||
" Tx Queue <%d>\n"
|
||||
" TDH, TDT <%x>, <%x>\n"
|
||||
" next_to_use <%x>\n"
|
||||
|
@ -812,8 +812,8 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
|
|||
if (adapter->detect_tx_hung) {
|
||||
if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
|
||||
/* schedule immediate reset if we believe we hung */
|
||||
e_info("tx hang %d detected, resetting adapter\n",
|
||||
adapter->tx_timeout_count + 1);
|
||||
e_info(probe, "tx hang %d detected, resetting "
|
||||
"adapter\n", adapter->tx_timeout_count + 1);
|
||||
ixgbe_tx_timeout(adapter->netdev);
|
||||
}
|
||||
}
|
||||
|
@ -1652,8 +1652,8 @@ static void ixgbe_check_overtemp_task(struct work_struct *work)
|
|||
return;
|
||||
break;
|
||||
}
|
||||
e_crit("Network adapter has been stopped because it "
|
||||
"has over heated. Restart the computer. If the problem "
|
||||
e_crit(drv, "Network adapter has been stopped because it has "
|
||||
"over heated. Restart the computer. If the problem "
|
||||
"persists, power off the system and replace the "
|
||||
"adapter\n");
|
||||
/* write to clear the interrupt */
|
||||
|
@ -1667,7 +1667,7 @@ static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
|
|||
|
||||
if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
|
||||
(eicr & IXGBE_EICR_GPI_SDP1)) {
|
||||
e_crit("Fan has stopped, replace the adapter\n");
|
||||
e_crit(probe, "Fan has stopped, replace the adapter\n");
|
||||
/* write to clear the interrupt */
|
||||
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
||||
}
|
||||
|
@ -2153,7 +2153,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
|
|||
handler, 0, adapter->name[vector],
|
||||
adapter->q_vector[vector]);
|
||||
if (err) {
|
||||
e_err("request_irq failed for MSIX interrupt: "
|
||||
e_err(probe, "request_irq failed for MSIX interrupt "
|
||||
"Error: %d\n", err);
|
||||
goto free_queue_irqs;
|
||||
}
|
||||
|
@ -2163,7 +2163,7 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
|
|||
err = request_irq(adapter->msix_entries[vector].vector,
|
||||
ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
|
||||
if (err) {
|
||||
e_err("request_irq for msix_lsc failed: %d\n", err);
|
||||
e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
|
||||
goto free_queue_irqs;
|
||||
}
|
||||
|
||||
|
@ -2349,7 +2349,7 @@ static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
|
|||
}
|
||||
|
||||
if (err)
|
||||
e_err("request_irq failed, Error %d\n", err);
|
||||
e_err(probe, "request_irq failed, Error %d\n", err);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
@ -2420,7 +2420,7 @@ static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
|
|||
map_vector_to_rxq(adapter, 0, 0);
|
||||
map_vector_to_txq(adapter, 0, 0);
|
||||
|
||||
e_info("Legacy interrupt IVAR setup done\n");
|
||||
e_info(hw, "Legacy interrupt IVAR setup done\n");
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -3316,7 +3316,7 @@ static inline void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
|
|||
msleep(1);
|
||||
}
|
||||
if (k >= IXGBE_MAX_RX_DESC_POLL) {
|
||||
e_err("RXDCTL.ENABLE on Rx queue %d not set within "
|
||||
e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
|
||||
"the polling period\n", rxr);
|
||||
}
|
||||
ixgbe_release_rx_desc(&adapter->hw, adapter->rx_ring[rxr],
|
||||
|
@ -3446,7 +3446,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
|
|||
} while (--wait_loop &&
|
||||
!(txdctl & IXGBE_TXDCTL_ENABLE));
|
||||
if (!wait_loop)
|
||||
e_err("Could not enable Tx Queue %d\n", j);
|
||||
e_err(drv, "Could not enable Tx Queue %d\n", j);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -3494,7 +3494,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
|
|||
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
|
||||
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
|
||||
if (esdp & IXGBE_ESDP_SDP1)
|
||||
e_crit("Fan has stopped, replace the adapter\n");
|
||||
e_crit(drv, "Fan has stopped, replace the adapter\n");
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -3523,7 +3523,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
|
|||
} else {
|
||||
err = ixgbe_non_sfp_link_config(hw);
|
||||
if (err)
|
||||
e_err("link_config FAILED %d\n", err);
|
||||
e_err(probe, "link_config FAILED %d\n", err);
|
||||
}
|
||||
|
||||
for (i = 0; i < adapter->num_tx_queues; i++)
|
||||
|
@ -3977,12 +3977,12 @@ static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
|
|||
adapter->num_tx_queues = 1;
|
||||
#ifdef CONFIG_IXGBE_DCB
|
||||
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
|
||||
e_info("FCoE enabled with DCB\n");
|
||||
e_info(probe, "FCoE enabled with DCB\n");
|
||||
ixgbe_set_dcb_queues(adapter);
|
||||
}
|
||||
#endif
|
||||
if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
|
||||
e_info("FCoE enabled with RSS\n");
|
||||
e_info(probe, "FCoE enabled with RSS\n");
|
||||
if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
|
||||
(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
|
||||
ixgbe_set_fdir_queues(adapter);
|
||||
|
@ -4711,7 +4711,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
|
|||
"supported module.\n");
|
||||
unregister_netdev(adapter->netdev);
|
||||
} else {
|
||||
e_info("detected SFP+: %d\n", hw->phy.sfp_type);
|
||||
e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
|
||||
}
|
||||
/* don't need this routine any more */
|
||||
clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
|
||||
|
@ -4891,7 +4891,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
|
|||
err:
|
||||
vfree(tx_ring->tx_buffer_info);
|
||||
tx_ring->tx_buffer_info = NULL;
|
||||
e_err("Unable to allocate memory for the Tx descriptor ring\n");
|
||||
e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
|
@ -4913,7 +4913,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
|
|||
err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
|
||||
if (!err)
|
||||
continue;
|
||||
e_err("Allocation for Tx Queue %u failed\n", i);
|
||||
e_err(probe, "Allocation for Tx Queue %u failed\n", i);
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -4938,7 +4938,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
|
|||
if (!rx_ring->rx_buffer_info)
|
||||
rx_ring->rx_buffer_info = vmalloc(size);
|
||||
if (!rx_ring->rx_buffer_info) {
|
||||
e_err("vmalloc allocation failed for the Rx desc ring\n");
|
||||
e_err(probe, "vmalloc allocation failed for the Rx "
|
||||
"descriptor ring\n");
|
||||
goto alloc_failed;
|
||||
}
|
||||
memset(rx_ring->rx_buffer_info, 0, size);
|
||||
|
@ -4951,7 +4952,8 @@ int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
|
|||
&rx_ring->dma, GFP_KERNEL);
|
||||
|
||||
if (!rx_ring->desc) {
|
||||
e_err("Memory allocation failed for the Rx desc ring\n");
|
||||
e_err(probe, "Memory allocation failed for the Rx "
|
||||
"descriptor ring\n");
|
||||
vfree(rx_ring->rx_buffer_info);
|
||||
goto alloc_failed;
|
||||
}
|
||||
|
@ -4984,7 +4986,7 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
|
|||
err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
|
||||
if (!err)
|
||||
continue;
|
||||
e_err("Allocation for Rx Queue %u failed\n", i);
|
||||
e_err(probe, "Allocation for Rx Queue %u failed\n", i);
|
||||
break;
|
||||
}
|
||||
|
||||
|
@ -5083,7 +5085,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
|
|||
if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
|
||||
return -EINVAL;
|
||||
|
||||
e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
|
||||
e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
|
||||
/* must set new MTU before calling down or up */
|
||||
netdev->mtu = new_mtu;
|
||||
|
||||
|
@ -5597,7 +5599,7 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
|
|||
set_bit(__IXGBE_FDIR_INIT_DONE,
|
||||
&(adapter->tx_ring[i]->reinit_state));
|
||||
} else {
|
||||
e_err("failed to finish FDIR re-initialization, "
|
||||
e_err(probe, "failed to finish FDIR re-initialization, "
|
||||
"ignored adding FDIR ATR filters\n");
|
||||
}
|
||||
/* Done FDIR Re-initialization, enable transmits */
|
||||
|
@ -5669,7 +5671,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
|
|||
flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
|
||||
}
|
||||
|
||||
e_info("NIC Link is Up %s, Flow Control: %s\n",
|
||||
e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
|
||||
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
|
||||
"10 Gbps" :
|
||||
(link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
|
||||
|
@ -5687,7 +5689,7 @@ static void ixgbe_watchdog_task(struct work_struct *work)
|
|||
adapter->link_up = false;
|
||||
adapter->link_speed = 0;
|
||||
if (netif_carrier_ok(netdev)) {
|
||||
e_info("NIC Link is Down\n");
|
||||
e_info(drv, "NIC Link is Down\n");
|
||||
netif_carrier_off(netdev);
|
||||
}
|
||||
}
|
||||
|
@ -5863,8 +5865,9 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
|
|||
break;
|
||||
default:
|
||||
if (unlikely(net_ratelimit())) {
|
||||
e_warn("partial checksum but "
|
||||
"proto=%x!\n", skb->protocol);
|
||||
e_warn(probe, "partial checksum "
|
||||
"but proto=%x!\n",
|
||||
skb->protocol);
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
@ -6472,7 +6475,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
|
|||
adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
|
||||
err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
|
||||
if (err) {
|
||||
e_err("Failed to enable PCI sriov: %d\n", err);
|
||||
e_err(probe, "Failed to enable PCI sriov: %d\n", err);
|
||||
goto err_novfs;
|
||||
}
|
||||
/* If call to enable VFs succeeded then allocate memory
|
||||
|
@ -6496,8 +6499,8 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
|
|||
}
|
||||
|
||||
/* Oh oh */
|
||||
e_err("Unable to allocate memory for VF Data Storage - SRIOV "
|
||||
"disabled\n");
|
||||
e_err(probe, "Unable to allocate memory for VF Data Storage - "
|
||||
"SRIOV disabled\n");
|
||||
pci_disable_sriov(adapter->pdev);
|
||||
|
||||
err_novfs:
|
||||
|
@ -6667,7 +6670,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
|
|||
if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
|
||||
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
|
||||
if (esdp & IXGBE_ESDP_SDP1)
|
||||
e_crit("Fan has stopped, replace the adapter\n");
|
||||
e_crit(probe, "Fan has stopped, replace the adapter\n");
|
||||
}
|
||||
|
||||
/* reset_hw fills in the perm_addr as well */
|
||||
|
@ -6851,7 +6854,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
|
|||
}
|
||||
#endif
|
||||
if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
|
||||
e_info("IOV is enabled with %d VFs\n", adapter->num_vfs);
|
||||
e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
|
||||
for (i = 0; i < adapter->num_vfs; i++)
|
||||
ixgbe_vf_configuration(pdev, (i | 0x10000000));
|
||||
}
|
||||
|
@ -6999,7 +7002,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
|
|||
int err;
|
||||
|
||||
if (pci_enable_device_mem(pdev)) {
|
||||
e_err("Cannot re-enable PCI device after reset.\n");
|
||||
e_err(probe, "Cannot re-enable PCI device after reset.\n");
|
||||
result = PCI_ERS_RESULT_DISCONNECT;
|
||||
} else {
|
||||
pci_set_master(pdev);
|
||||
|
@ -7037,7 +7040,7 @@ static void ixgbe_io_resume(struct pci_dev *pdev)
|
|||
|
||||
if (netif_running(netdev)) {
|
||||
if (ixgbe_up(adapter)) {
|
||||
e_info("ixgbe_up failed after reset\n");
|
||||
e_info(probe, "ixgbe_up failed after reset\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
|
|
@ -185,7 +185,8 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
|
|||
|
||||
if (enable) {
|
||||
random_ether_addr(vf_mac_addr);
|
||||
e_info("IOV: VF %d is enabled MAC %pM\n", vfn, vf_mac_addr);
|
||||
e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
|
||||
vfn, vf_mac_addr);
|
||||
/*
|
||||
* Store away the VF "permananet" MAC address, it will ask
|
||||
* for it later.
|
||||
|
@ -244,7 +245,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
|
|||
if (msgbuf[0] == IXGBE_VF_RESET) {
|
||||
unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
|
||||
u8 *addr = (u8 *)(&msgbuf[1]);
|
||||
e_info("VF Reset msg received from vf %d\n", vf);
|
||||
e_info(probe, "VF Reset msg received from vf %d\n", vf);
|
||||
adapter->vfinfo[vf].clear_to_send = false;
|
||||
ixgbe_vf_reset_msg(adapter, vf);
|
||||
adapter->vfinfo[vf].clear_to_send = true;
|
||||
|
@ -297,7 +298,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
|
|||
retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
|
||||
break;
|
||||
default:
|
||||
e_err("Unhandled Msg %8.8x\n", msgbuf[0]);
|
||||
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
|
||||
retval = IXGBE_ERR_MBX;
|
||||
break;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue