DM9000: Remove EEPROM initialisation code.

Remove the old hack to program an initial EEPROM setting
into the DM9000 as we now have ethtool support for reading
and writing the EEPROM.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Ben Dooks 2008-02-05 00:02:13 +00:00 committed by Jeff Garzik
parent e662ee02cc
commit 3927f1c88e
1 changed files with 0 additions and 29 deletions

View File

@ -191,10 +191,6 @@ static void dm9000_write_eeprom(board_info_t *, int addr, u8 *dp);
static void dm9000_rx(struct net_device *);
static void dm9000_hash_table(struct net_device *);
//#define DM9000_PROGRAM_EEPROM
#ifdef DM9000_PROGRAM_EEPROM
static void program_eeprom(board_info_t * db);
#endif
/* DM9000 network board routine ---------------------------- */
static void
@ -699,9 +695,6 @@ dm9000_probe(struct platform_device *pdev)
ndev->poll_controller = &dm9000_poll_controller;
#endif
#ifdef DM9000_PROGRAM_EEPROM
program_eeprom(db);
#endif
db->msg_enable = NETIF_MSG_LINK;
db->mii.phy_id_mask = 0x1f;
db->mii.reg_num_mask = 0x1f;
@ -1112,28 +1105,6 @@ dm9000_write_eeprom(board_info_t *db, int offset, u8 *data)
mutex_unlock(&db->addr_lock);
}
#ifdef DM9000_PROGRAM_EEPROM
/*
* Only for development:
* Here we write static data to the eeprom in case
* we don't have valid content on a new board
*/
static void
program_eeprom(board_info_t * db)
{
u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */
0x0000, /* Autoload: accept nothing */
0x0a46, 0x9000, /* Vendor / Product ID */
0x0000, /* pin control */
0x0000,
}; /* Wake-up mode control */
int i;
for (i = 0; i < 8; i++)
write_srom_word(db, i, eeprom[i]);
}
#endif
/*
* Calculate the CRC valude of the Rx packet
* flag = 1 : return the reverse CRC (for the received packet CRC)