- Set the raw NAND number of targets to the right value.

- Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl0Pwk0ACgkQJWrqGEe9
 VoS8nwf7B76jN39/g32Hfp4JT/B7cntrHzTGxfUT9NAhKa4MaI7FOU2eeTryaVdO
 32OJlttV+r0Fu6p+In1VXCk4j1YlkcOaxqB1VXsMEaQ+Vt8ONVTbJX/cqyGC/ogq
 MZlO8Rys4MGmq7vRiZ+1SD8lOV4qXgmX3D38NjUQ1oCAMCCgJgkWYFV2tv9Eie09
 2CCT3IBFj+D34qaBiM+qocGtnzWfB9477A6ZeI4BwjUe1ZtoEYeIOrCXWiywabjM
 msHRN1tNt5kfINnx0TkQFcnpbdDo5tMyTHCkEQt5Ewdae4vyCv7xTHTCZEttC7Ic
 Rx2yONzrZGQVP4c27y22K954C1jGcg==
 =ZiPm
 -----END PGP SIGNATURE-----

Merge tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:

 - Set the raw NAND number of targets to the right value

 - Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes

* tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes
  mtd: rawnand: initialize ntargets with maxchips

drivers/mtd/nand/raw/nand_base.c

@@ -4662,7 +4662,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
 	memorg = nanddev_get_memorg(&chip->base);
 	memorg->planes_per_lun = 1;
 	memorg->luns_per_target = 1;
-	memorg->ntargets = 1;
 
 	/*
 	 * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
@@ -5027,6 +5026,8 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 	if (ret)
 		return ret;
 
+	memorg->ntargets = maxchips;
+
 	/* Read the flash type */
 	ret = nand_detect(chip, table);
 	if (ret) {

drivers/mtd/spi-nor/spi-nor.c

@@ -1636,6 +1636,95 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
 	return 0;
 }
 
+/**
+ * spi_nor_clear_sr_bp() - clear the Status Register Block Protection bits.
+ * @nor:        pointer to a 'struct spi_nor'
+ *
+ * Read-modify-write function that clears the Block Protection bits from the
+ * Status Register without affecting other bits.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_clear_sr_bp(struct spi_nor *nor)
+{
+	int ret;
+	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+
+	ret = read_sr(nor);
+	if (ret < 0) {
+		dev_err(nor->dev, "error while reading status register\n");
+		return ret;
+	}
+
+	write_enable(nor);
+
+	ret = write_sr(nor, ret & ~mask);
+	if (ret) {
+		dev_err(nor->dev, "write to status register failed\n");
+		return ret;
+	}
+
+	ret = spi_nor_wait_till_ready(nor);
+	if (ret)
+		dev_err(nor->dev, "timeout while writing status register\n");
+	return ret;
+}
+
+/**
+ * spi_nor_spansion_clear_sr_bp() - clear the Status Register Block Protection
+ * bits on spansion flashes.
+ * @nor:        pointer to a 'struct spi_nor'
+ *
+ * Read-modify-write function that clears the Block Protection bits from the
+ * Status Register without affecting other bits. The function is tightly
+ * coupled with the spansion_quad_enable() function. Both assume that the Write
+ * Register with 16 bits, together with the Read Configuration Register (35h)
+ * instructions are supported.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
+{
+	int ret;
+	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+	u8 sr_cr[2] = {0};
+
+	/* Check current Quad Enable bit value. */
+	ret = read_cr(nor);
+	if (ret < 0) {
+		dev_err(nor->dev,
+			"error while reading configuration register\n");
+		return ret;
+	}
+
+	/*
+	 * When the configuration register Quad Enable bit is one, only the
+	 * Write Status (01h) command with two data bytes may be used.
+	 */
+	if (ret & CR_QUAD_EN_SPAN) {
+		sr_cr[1] = ret;
+
+		ret = read_sr(nor);
+		if (ret < 0) {
+			dev_err(nor->dev,
+				"error while reading status register\n");
+			return ret;
+		}
+		sr_cr[0] = ret & ~mask;
+
+		ret = write_sr_cr(nor, sr_cr);
+		if (ret)
+			dev_err(nor->dev, "16-bit write register failed\n");
+		return ret;
+	}
+
+	/*
+	 * If the Quad Enable bit is zero, use the Write Status (01h) command
+	 * with one data byte.
+	 */
+	return spi_nor_clear_sr_bp(nor);
+}
+
 /* Used when the "_ext_id" is two bytes at most */
 #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags)	\
 		.id = {							\
@@ -3660,6 +3749,8 @@ static int spi_nor_init_params(struct spi_nor *nor,
 		default:
 			/* Kept only for backward compatibility purpose. */
 			params->quad_enable = spansion_quad_enable;
+			if (nor->clear_sr_bp)
+				nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp;
 			break;
 		}
 
@@ -3912,17 +4003,13 @@ static int spi_nor_init(struct spi_nor *nor)
 {
 	int err;
 
-	/*
-	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
-	 * with the software protection bits set
-	 */
-	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
-	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
-	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
-	    nor->info->flags & SPI_NOR_HAS_LOCK) {
-		write_enable(nor);
-		write_sr(nor, 0);
-		spi_nor_wait_till_ready(nor);
+	if (nor->clear_sr_bp) {
+		err = nor->clear_sr_bp(nor);
+		if (err) {
+			dev_err(nor->dev,
+				"fail to clear block protection bits\n");
+			return err;
+		}
 	}
 
 	if (nor->quad_enable) {
@@ -4047,6 +4134,16 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (info->flags & SPI_S3AN)
 		nor->flags |=  SNOR_F_READY_XSR_RDY;
 
+	/*
+	 * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
+	 * with the software protection bits set.
+	 */
+	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
+	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
+	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
+	    nor->info->flags & SPI_NOR_HAS_LOCK)
+		nor->clear_sr_bp = spi_nor_clear_sr_bp;
+
 	/* Parse the Serial Flash Discoverable Parameters table. */
 	ret = spi_nor_init_params(nor, &params);
 	if (ret)

include/linux/mtd/spi-nor.h

@@ -373,6 +373,8 @@ struct flash_info;
  * @flash_unlock:	[FLASH-SPECIFIC] unlock a region of the SPI NOR
  * @flash_is_locked:	[FLASH-SPECIFIC] check if a region of the SPI NOR is
  * @quad_enable:	[FLASH-SPECIFIC] enables SPI NOR quad mode
+ * @clear_sr_bp:	[FLASH-SPECIFIC] clears the Block Protection Bits from
+ *			the SPI NOR Status Register.
  *			completely locked
  * @priv:		the private data
  */
@@ -410,6 +412,7 @@ struct spi_nor {
 	int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 	int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
 	int (*quad_enable)(struct spi_nor *nor);
+	int (*clear_sr_bp)(struct spi_nor *nor);
 
 	void *priv;
 };