net: dsa: sja1105: prepare tagger for handling DSA tags and VLAN simultaneously

In VLAN-unaware mode, sja1105 uses VLAN tags with a custom TPID of
0xdadb. While in the yet-to-be introduced best_effort_vlan_filtering
mode, it needs to work with normal VLAN TPID values.

A complication arises when we must transmit a VLAN-tagged packet to the
switch when it's in VLAN-aware mode. We need to construct a packet with
2 VLAN tags, and the switch will use the outer header for routing and
pop it on egress. But sadly, here the 2 hardware generations don't
behave the same:

- E/T switches won't pop an ETH_P_8021AD tag on egress, it seems
  (packets will remain double-tagged).
- P/Q/R/S switches will drop a packet with 2 ETH_P_8021Q tags (it looks
  like it tries to prevent VLAN hopping).

But looks like the reverse is also true:

- E/T switches have no problem popping the outer tag from packets with
  2 ETH_P_8021Q tags.
- P/Q/R/S will have no problem popping a single tag even if that is
  ETH_P_8021AD.

So it is clear that if we want the hardware to work with dsa_8021q
tagging in VLAN-aware mode, we need to send different TPIDs depending on
revision. Keep that information in priv->info->qinq_tpid.

The per-port tagger structure will hold an xmit_tpid value that depends
not only upon the qinq_tpid, but also upon the VLAN awareness state
itself (in case we must transmit using 0xdadb).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/sja1105/sja1105.h

@@ -87,6 +87,12 @@ struct sja1105_info {
 	const struct sja1105_dynamic_table_ops *dyn_ops;
 	const struct sja1105_table_ops *static_ops;
 	const struct sja1105_regs *regs;
+	/* Both E/T and P/Q/R/S have quirks when it comes to popping the S-Tag
+	 * from double-tagged frames. E/T will pop it only when it's equal to
+	 * TPID from the General Parameters Table, while P/Q/R/S will only
+	 * pop it when it's equal to TPID2.
+	 */
+	u16 qinq_tpid;
 	int (*reset_cmd)(struct dsa_switch *ds);
 	int (*setup_rgmii_delay)(const void *ctx, int port);
 	/* Prototypes from include/net/dsa.h */

drivers/net/dsa/sja1105/sja1105_main.c

@@ -2153,6 +2153,15 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
 		tpid2 = ETH_P_SJA1105;
 	}
 
+	for (port = 0; port < ds->num_ports; port++) {
+		struct sja1105_port *sp = &priv->ports[port];
+
+		if (enabled)
+			sp->xmit_tpid = priv->info->qinq_tpid;
+		else
+			sp->xmit_tpid = ETH_P_SJA1105;
+	}
+
 	if (!enabled)
 		state = SJA1105_VLAN_UNAWARE;
 	else
@@ -2866,6 +2875,7 @@ static int sja1105_probe(struct spi_device *spi)
 			goto out;
 		}
 		skb_queue_head_init(&sp->xmit_queue);
+		sp->xmit_tpid = ETH_P_SJA1105;
 	}
 
 	return 0;

drivers/net/dsa/sja1105/sja1105_spi.c

@@ -512,6 +512,7 @@ struct sja1105_info sja1105e_info = {
 	.part_no		= SJA1105ET_PART_NO,
 	.static_ops		= sja1105e_table_ops,
 	.dyn_ops		= sja1105et_dyn_ops,
+	.qinq_tpid		= ETH_P_8021Q,
 	.ptp_ts_bits		= 24,
 	.ptpegr_ts_bytes	= 4,
 	.reset_cmd		= sja1105et_reset_cmd,
@@ -526,6 +527,7 @@ struct sja1105_info sja1105t_info = {
 	.part_no		= SJA1105ET_PART_NO,
 	.static_ops		= sja1105t_table_ops,
 	.dyn_ops		= sja1105et_dyn_ops,
+	.qinq_tpid		= ETH_P_8021Q,
 	.ptp_ts_bits		= 24,
 	.ptpegr_ts_bytes	= 4,
 	.reset_cmd		= sja1105et_reset_cmd,
@@ -540,6 +542,7 @@ struct sja1105_info sja1105p_info = {
 	.part_no		= SJA1105P_PART_NO,
 	.static_ops		= sja1105p_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
+	.qinq_tpid		= ETH_P_8021AD,
 	.ptp_ts_bits		= 32,
 	.ptpegr_ts_bytes	= 8,
 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
@@ -555,6 +558,7 @@ struct sja1105_info sja1105q_info = {
 	.part_no		= SJA1105Q_PART_NO,
 	.static_ops		= sja1105q_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
+	.qinq_tpid		= ETH_P_8021AD,
 	.ptp_ts_bits		= 32,
 	.ptpegr_ts_bytes	= 8,
 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
@@ -570,6 +574,7 @@ struct sja1105_info sja1105r_info = {
 	.part_no		= SJA1105R_PART_NO,
 	.static_ops		= sja1105r_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
+	.qinq_tpid		= ETH_P_8021AD,
 	.ptp_ts_bits		= 32,
 	.ptpegr_ts_bytes	= 8,
 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,
@@ -586,6 +591,7 @@ struct sja1105_info sja1105s_info = {
 	.static_ops		= sja1105s_table_ops,
 	.dyn_ops		= sja1105pqrs_dyn_ops,
 	.regs			= &sja1105pqrs_regs,
+	.qinq_tpid		= ETH_P_8021AD,
 	.ptp_ts_bits		= 32,
 	.ptpegr_ts_bytes	= 8,
 	.setup_rgmii_delay	= sja1105pqrs_setup_rgmii_delay,

include/linux/dsa/sja1105.h

@@ -59,6 +59,7 @@ struct sja1105_port {
 	struct sja1105_tagger_data *data;
 	struct dsa_port *dp;
 	bool hwts_tx_en;
+	u16 xmit_tpid;
 };
 
 #endif /* _NET_DSA_SJA1105_H */

net/dsa/tag_sja1105.c

@@ -69,12 +69,25 @@ static inline bool sja1105_is_meta_frame(const struct sk_buff *skb)
 	return true;
 }
 
+static bool sja1105_can_use_vlan_as_tags(const struct sk_buff *skb)
+{
+	struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
+
+	if (hdr->h_vlan_proto == ntohs(ETH_P_SJA1105))
+		return true;
+
+	if (hdr->h_vlan_proto != ntohs(ETH_P_8021Q))
+		return false;
+
+	return vid_is_dsa_8021q(ntohs(hdr->h_vlan_TCI) & VLAN_VID_MASK);
+}
+
 /* This is the first time the tagger sees the frame on RX.
  * Figure out if we can decode it.
  */
 static bool sja1105_filter(const struct sk_buff *skb, struct net_device *dev)
 {
-	if (!dsa_port_is_vlan_filtering(dev->dsa_ptr))
+	if (sja1105_can_use_vlan_as_tags(skb))
 		return true;
 	if (sja1105_is_link_local(skb))
 		return true;
@@ -96,6 +109,11 @@ static struct sk_buff *sja1105_defer_xmit(struct sja1105_port *sp,
 	return NULL;
 }
 
+static u16 sja1105_xmit_tpid(struct sja1105_port *sp)
+{
+	return sp->xmit_tpid;
+}
+
 static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
 				    struct net_device *netdev)
 {
@@ -111,15 +129,7 @@ static struct sk_buff *sja1105_xmit(struct sk_buff *skb,
 	if (unlikely(sja1105_is_link_local(skb)))
 		return sja1105_defer_xmit(dp->priv, skb);
 
-	/* If we are under a vlan_filtering bridge, IP termination on
-	 * switch ports based on 802.1Q tags is simply too brittle to
-	 * be passable. So just defer to the dsa_slave_notag_xmit
-	 * implementation.
-	 */
-	if (dsa_port_is_vlan_filtering(dp))
-		return skb;
-
-	return dsa_8021q_xmit(skb, netdev, ETH_P_SJA1105,
+	return dsa_8021q_xmit(skb, netdev, sja1105_xmit_tpid(dp->priv),
 			     ((pcp << VLAN_PRIO_SHIFT) | tx_vid));
 }
 
@@ -258,7 +268,7 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb,
 
 	hdr = eth_hdr(skb);
 	tpid = ntohs(hdr->h_proto);
-	is_tagged = (tpid == ETH_P_SJA1105);
+	is_tagged = (tpid == ETH_P_SJA1105 || tpid == ETH_P_8021Q);
 	is_link_local = sja1105_is_link_local(skb);
 	is_meta = sja1105_is_meta_frame(skb);