spi: spi-gpio: Add DT bindings
This patch adds DT bindings to the spi-gpio driver and some documentation about how to use it. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
161c2dd3ca
commit
38ab18caa0
|
@ -0,0 +1,29 @@
|
|||
SPI-GPIO devicetree bindings
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: should be set to "spi-gpio"
|
||||
- #address-cells: should be set to <0x1>
|
||||
- ranges
|
||||
- gpio-sck: GPIO spec for the SCK line to use
|
||||
- gpio-miso: GPIO spec for the MISO line to use
|
||||
- gpio-mosi: GPIO spec for the MOSI line to use
|
||||
- cs-gpios: GPIOs to use for chipselect lines
|
||||
- num-chipselects: number of chipselect lines
|
||||
|
||||
Example:
|
||||
|
||||
spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <0x1>;
|
||||
ranges;
|
||||
|
||||
gpio-sck = <&gpio 95 0>;
|
||||
gpio-miso = <&gpio 98 0>;
|
||||
gpio-mosi = <&gpio 97 0>;
|
||||
cs-gpios = <&gpio 125 0>;
|
||||
num-chipselects = <1>;
|
||||
|
||||
/* clients */
|
||||
};
|
||||
|
|
@ -22,6 +22,8 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/spi_bitbang.h>
|
||||
|
@ -232,13 +234,27 @@ static void spi_gpio_chipselect(struct spi_device *spi, int is_active)
|
|||
|
||||
static int spi_gpio_setup(struct spi_device *spi)
|
||||
{
|
||||
unsigned int cs = (unsigned int) spi->controller_data;
|
||||
unsigned int cs;
|
||||
int status = 0;
|
||||
struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
|
||||
struct device_node *np = spi->master->dev.of_node;
|
||||
|
||||
if (spi->bits_per_word > 32)
|
||||
return -EINVAL;
|
||||
|
||||
if (np) {
|
||||
/*
|
||||
* In DT environments, the CS GPIOs have already been
|
||||
* initialized from the "cs-gpios" property of the node.
|
||||
*/
|
||||
cs = spi_gpio->cs_gpios[spi->chip_select];
|
||||
} else {
|
||||
/*
|
||||
* ... otherwise, take it from spi->controller_data
|
||||
*/
|
||||
cs = (unsigned int) spi->controller_data;
|
||||
}
|
||||
|
||||
if (!spi->controller_state) {
|
||||
if (cs != SPI_GPIO_NO_CHIPSELECT) {
|
||||
status = gpio_request(cs, dev_name(&spi->dev));
|
||||
|
@ -250,6 +266,7 @@ static int spi_gpio_setup(struct spi_device *spi)
|
|||
}
|
||||
if (!status) {
|
||||
status = spi_bitbang_setup(spi);
|
||||
/* in case it was initialized from static board data */
|
||||
spi_gpio->cs_gpios[spi->chip_select] = cs;
|
||||
}
|
||||
|
||||
|
@ -326,6 +343,55 @@ done:
|
|||
return value;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_device_id spi_gpio_dt_ids[] = {
|
||||
{ .compatible = "spi-gpio" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, spi_gpio_dt_ids);
|
||||
|
||||
static int spi_gpio_probe_dt(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
u32 tmp;
|
||||
struct spi_gpio_platform_data *pdata;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
const struct of_device_id *of_id =
|
||||
of_match_device(spi_gpio_dt_ids, &pdev->dev);
|
||||
|
||||
if (!of_id)
|
||||
return 0;
|
||||
|
||||
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
||||
if (!pdata)
|
||||
return -ENOMEM;
|
||||
|
||||
pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
|
||||
pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
|
||||
pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
|
||||
|
||||
ret = of_property_read_u32(np, "num-chipselects", &tmp);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "num-chipselects property not found\n");
|
||||
goto error_free;
|
||||
}
|
||||
|
||||
pdata->num_chipselect = tmp;
|
||||
pdev->dev.platform_data = pdata;
|
||||
|
||||
return 1;
|
||||
|
||||
error_free:
|
||||
devm_kfree(&pdev->dev, pdata);
|
||||
return ret;
|
||||
}
|
||||
#else
|
||||
static inline int spi_probe_dt(struct platform_device *)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int __devinit spi_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
int status;
|
||||
|
@ -333,6 +399,13 @@ static int __devinit spi_gpio_probe(struct platform_device *pdev)
|
|||
struct spi_gpio *spi_gpio;
|
||||
struct spi_gpio_platform_data *pdata;
|
||||
u16 master_flags = 0;
|
||||
bool use_of = 0;
|
||||
|
||||
status = spi_gpio_probe_dt(pdev);
|
||||
if (status < 0)
|
||||
return status;
|
||||
if (status > 0)
|
||||
use_of = 1;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
#ifdef GENERIC_BITBANG
|
||||
|
@ -362,6 +435,23 @@ static int __devinit spi_gpio_probe(struct platform_device *pdev)
|
|||
master->num_chipselect = SPI_N_CHIPSEL;
|
||||
master->setup = spi_gpio_setup;
|
||||
master->cleanup = spi_gpio_cleanup;
|
||||
#ifdef CONFIG_OF
|
||||
master->dev.of_node = pdev->dev.of_node;
|
||||
|
||||
if (use_of) {
|
||||
int i;
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
|
||||
/*
|
||||
* In DT environments, take the CS GPIO from the "cs-gpios"
|
||||
* property of the node.
|
||||
*/
|
||||
|
||||
for (i = 0; i < SPI_N_CHIPSEL; i++)
|
||||
spi_gpio->cs_gpios[i] =
|
||||
of_get_named_gpio(np, "cs-gpios", i);
|
||||
}
|
||||
#endif
|
||||
|
||||
spi_gpio->bitbang.master = spi_master_get(master);
|
||||
spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
|
||||
|
@ -422,8 +512,11 @@ static int __devexit spi_gpio_remove(struct platform_device *pdev)
|
|||
MODULE_ALIAS("platform:" DRIVER_NAME);
|
||||
|
||||
static struct platform_driver spi_gpio_driver = {
|
||||
.driver.name = DRIVER_NAME,
|
||||
.driver.owner = THIS_MODULE,
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(spi_gpio_dt_ids),
|
||||
},
|
||||
.probe = spi_gpio_probe,
|
||||
.remove = __devexit_p(spi_gpio_remove),
|
||||
};
|
||||
|
|
Loading…
Reference in New Issue