Merge patch series "dt-bindings: Add a cpu-capacity property for RISC-V"

Conor Dooley <conor@kernel.org> says:

From: Conor Dooley <conor.dooley@microchip.com>

Ever since RISC-V starting using generic arch topology code, the code
paths for cpu-capacity have been there but there's no binding defined to
actually convey the information. Defining the same property as used on
arm seems to be the only logical thing to do, so do it.

[Palmer: This is on top of the fix required to make it work, which
itself wasn't merged until late in the 6.2 cycle and thus pulls in
various other fixes.]

* b4-shazam-merge:
  dt-bindings: riscv: add a capacity-dmips-mhz cpu property
  dt-bindings: arm: move cpu-capacity to a shared loation
  riscv: Move call to init_cpu_topology() to later initialization stage
  riscv/kprobe: Fix instruction simulation of JALR
  riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
  MAINTAINERS: add an IRC entry for RISC-V
  RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
  dt-bindings: riscv: fix single letter canonical order
  dt-bindings: riscv: fix underscore requirement for multi-letter extensions
  riscv: uaccess: fix type of 0 variable on error in get_user()
  riscv, kprobes: Stricter c.jr/c.jalr decoding

Link: https://lore.kernel.org/r/20230104180513.1379453-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -257,7 +257,7 @@ properties:
 
   capacity-dmips-mhz:
     description:
-      u32 value representing CPU capacity (see ./cpu-capacity.txt) in
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
       DMIPS/MHz, relative to highest capacity-dmips-mhz
       in the system.
 

Documentation/devicetree/bindings/cpu/cpu-capacity.txt

@@ -1,12 +1,12 @@
 ==========================================
-ARM CPUs capacity bindings
+CPU capacity bindings
 ==========================================
 
 ==========================================
 1 - Introduction
 ==========================================
 
-ARM systems may be configured to have cpus with different power/performance
+Some systems may be configured to have cpus with different power/performance
 characteristics within the same chip. In this case, additional information has
 to be made available to the kernel for it to be aware of such differences and
 take decisions accordingly.

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -83,7 +83,7 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
     $ref: "/schemas/types.yaml#/definitions/string"
-    pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$
+    pattern: ^rv(?:64|32)imaf?d?q?c?b?k?j?p?v?h?(?:[hsxz](?:[a-z])+)?(?:_[hsxz](?:[a-z])+)*$
 
   # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
   timebase-frequency: false
@@ -114,6 +114,12 @@ properties:
       List of phandles to idle state nodes supported
       by this hart (see ./idle-states.yaml).
 
+  capacity-dmips-mhz:
+    description:
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
+      DMIPS/MHz, relative to highest capacity-dmips-mhz
+      in the system.
+
 required:
   - riscv,isa
   - interrupt-controller

Documentation/scheduler/sched-capacity.rst

@@ -260,7 +260,7 @@ for that purpose.
 
 The arm and arm64 architectures directly map this to the arch_topology driver
 CPU scaling data, which is derived from the capacity-dmips-mhz CPU binding; see
-Documentation/devicetree/bindings/arm/cpu-capacity.txt.
+Documentation/devicetree/bindings/cpu/cpu-capacity.txt.
 
 3.2 Frequency invariance
 ------------------------

Documentation/translations/zh_CN/scheduler/sched-capacity.rst

@@ -233,7 +233,7 @@ CFS调度类基于实体负载跟踪机制（Per-Entity Load Tracking, PELT）
 
 arm和arm64架构直接把这个信息映射到arch_topology驱动的CPU scaling数据中（译注：参考
 arch_topology.h的percpu变量cpu_scale），它是从capacity-dmips-mhz CPU binding中衍生计算
-出来的。参见Documentation/devicetree/bindings/arm/cpu-capacity.txt。
+出来的。参见Documentation/devicetree/bindings/cpu/cpu-capacity.txt。
 
 3.2 频率不变性
 --------------

MAINTAINERS

@@ -17948,6 +17948,7 @@ M:	Albert Ou <aou@eecs.berkeley.edu>
 L:	linux-riscv@lists.infradead.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-riscv/list/
+C:	irc://irc.libera.chat/riscv
 P:	Documentation/riscv/patch-acceptance.rst
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
 F:	arch/riscv/

arch/riscv/include/asm/alternative-macros.h

@@ -46,7 +46,7 @@
 
 .macro ALTERNATIVE_CFG_2 old_c, new_c_1, vendor_id_1, errata_id_1, enable_1,	\
 				new_c_2, vendor_id_2, errata_id_2, enable_2
-	ALTERNATIVE_CFG \old_c, \new_c_1, \vendor_id_1, \errata_id_1, \enable_1
+	ALTERNATIVE_CFG "\old_c", "\new_c_1", \vendor_id_1, \errata_id_1, \enable_1
 	ALT_NEW_CONTENT \vendor_id_2, \errata_id_2, \enable_2, \new_c_2
 .endm
 

arch/riscv/include/asm/uaccess.h

@@ -165,7 +165,7 @@ do {								\
 	might_fault();						\
 	access_ok(__p, sizeof(*__p)) ?		\
 		__get_user((x), __p) :				\
-		((x) = 0, -EFAULT);				\
+		((x) = (__force __typeof__(x))0, -EFAULT);	\
 })
 
 #define __put_user_asm(insn, x, ptr, err)			\

arch/riscv/kernel/head.S

@@ -326,7 +326,7 @@ clear_bss_done:
 	call soc_early_init
 	tail start_kernel
 
-#if CONFIG_RISCV_BOOT_SPINWAIT
+#ifdef CONFIG_RISCV_BOOT_SPINWAIT
 .Lsecondary_start:
 	/* Set trap vector to spin forever to help debug */
 	la a3, .Lsecondary_park

arch/riscv/kernel/probes/simulate-insn.c

@@ -71,11 +71,11 @@ bool __kprobes simulate_jalr(u32 opcode, unsigned long addr, struct pt_regs *reg
 	u32 rd_index = (opcode >> 7) & 0x1f;
 	u32 rs1_index = (opcode >> 15) & 0x1f;
 
-	ret = rv_insn_reg_set_val(regs, rd_index, addr + 4);
+	ret = rv_insn_reg_get_val(regs, rs1_index, &base_addr);
 	if (!ret)
 		return ret;
 
-	ret = rv_insn_reg_get_val(regs, rs1_index, &base_addr);
+	ret = rv_insn_reg_set_val(regs, rd_index, addr + 4);
 	if (!ret)
 		return ret;
 

arch/riscv/kernel/smpboot.c

@@ -39,7 +39,6 @@ static DECLARE_COMPLETION(cpu_running);
 
 void __init smp_prepare_boot_cpu(void)
 {
-	init_cpu_topology();
 }
 
 void __init smp_prepare_cpus(unsigned int max_cpus)
@@ -48,6 +47,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	int ret;
 	unsigned int curr_cpuid;
 
+	init_cpu_topology();
+
 	curr_cpuid = smp_processor_id();
 	store_cpu_topology(curr_cpuid);
 	numa_store_cpu_info(curr_cpuid);