From 3860dc599b7d3de869d9d7e2274d2ca8f1e2be86 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Thu, 3 Sep 2020 03:50:46 +0200 Subject: [PATCH] clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL CLK_SET_RATE_GATE means that the clock must be gated when being reclocked. This is not the case for the PLLs in Ingenic SoCs. Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20200903015048.3091523-3-paul@crapouillou.net Signed-off-by: Stephen Boyd --- drivers/clk/ingenic/cgu.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c index 6bb5dedf0252..521a40dfcb72 100644 --- a/drivers/clk/ingenic/cgu.c +++ b/drivers/clk/ingenic/cgu.c @@ -182,6 +182,7 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate, const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll; unsigned long rate, flags; unsigned int m, n, od; + int ret = 0; u32 ctl; rate = ingenic_pll_calc(clk_info, req_rate, parent_rate, @@ -203,9 +204,14 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate, ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift; writel(ctl, cgu->base + pll_info->reg); + + /* If the PLL is enabled, verify that it's stable */ + if (ctl & BIT(pll_info->enable_bit)) + ret = ingenic_pll_check_stable(cgu, pll_info); + spin_unlock_irqrestore(&cgu->lock, flags); - return 0; + return ret; } static int ingenic_pll_enable(struct clk_hw *hw) @@ -662,7 +668,6 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx) } } else if (caps & CGU_CLK_PLL) { clk_init.ops = &ingenic_pll_ops; - clk_init.flags |= CLK_SET_RATE_GATE; caps &= ~CGU_CLK_PLL;