mmc: tmio: care about DMA tx/rx addr offset
Basically, SD_BUF0 Tx/Rx addresses are same in normal TMIO controller, but, it is different on Renesas R-Car SDHI controller if it uses DMAC (Rx address needs to add 0x2000 to Tx address) This patch adds new .dma_rx_offset and cares it Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
341eb6a4e7
commit
384b2cbd56
|
@ -39,6 +39,7 @@ struct sh_mobile_sdhi_of_data {
|
|||
unsigned long tmio_flags;
|
||||
unsigned long capabilities;
|
||||
unsigned long capabilities2;
|
||||
dma_addr_t dma_rx_offset;
|
||||
};
|
||||
|
||||
static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
|
||||
|
@ -56,6 +57,7 @@ static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
|
|||
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
|
||||
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
||||
.capabilities2 = MMC_CAP2_NO_MULTI_READ,
|
||||
.dma_rx_offset = 0x2000,
|
||||
};
|
||||
|
||||
static const struct of_device_id sh_mobile_sdhi_of_match[] = {
|
||||
|
@ -228,6 +230,7 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
|
|||
mmc_data->flags |= of_data->tmio_flags;
|
||||
mmc_data->capabilities |= of_data->capabilities;
|
||||
mmc_data->capabilities2 |= of_data->capabilities2;
|
||||
dma_priv->dma_rx_offset = of_data->dma_rx_offset;
|
||||
}
|
||||
|
||||
/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
|
||||
|
|
|
@ -312,7 +312,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
|
|||
if (pdata->dma->chan_priv_rx)
|
||||
cfg.slave_id = pdata->dma->slave_id_rx;
|
||||
cfg.direction = DMA_DEV_TO_MEM;
|
||||
cfg.src_addr = cfg.dst_addr;
|
||||
cfg.src_addr = cfg.dst_addr + pdata->dma->dma_rx_offset;
|
||||
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
||||
cfg.dst_addr = 0;
|
||||
ret = dmaengine_slave_config(host->chan_rx, &cfg);
|
||||
|
|
|
@ -96,6 +96,7 @@ struct tmio_mmc_dma {
|
|||
int slave_id_tx;
|
||||
int slave_id_rx;
|
||||
int alignment_shift;
|
||||
dma_addr_t dma_rx_offset;
|
||||
bool (*filter)(struct dma_chan *chan, void *arg);
|
||||
};
|
||||
|
||||
|
|
Loading…
Reference in New Issue