UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ASoC: Initial WM8903 microphone bias and short detection 

Provide support for WM8903 microphone presence and short detection
using the GPIOs to route out a logic signal suitable for handling
using snd_soc_jack_add_gpios() on the processor GPIOs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Mark Brown 2010-03-15 18:14:34 +00:00
parent 73b34ead74
commit 37f88e8407
3 changed files with 45 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
include/sound/wm8903.h
View File

@ -14,6 +14,28 @@
/* Used to enable configuration of a GPIO to all zeros */
#define WM8903_GPIO_NO_CONFIG 0x8000
/*
* R6 (0x06) - Mic Bias Control 0
*/
#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */
#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */
#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */
#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */
#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */
#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */
/*
* R116 (0x74) - GPIO Control 1
*/
@ -210,6 +232,13 @@
#define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */
struct wm8903_platform_data {
/* Default register value for R6 (Mic bias), used to configure
* microphone detection. In conjunction with gpio_cfg this
* can be used to route the microphone status signals out onto
* the GPIOs for use with snd_soc_jack_add_gpios().
*/
u16 micdet_cfg;
u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */
};

24
sound/soc/codecs/wm8903.c
View File

@ -11,7 +11,6 @@
*
* TODO:
* - TDM mode configuration.
* - Mic detect.
* - Digital microphone support.
* - Interrupt support (mic detect and sequencer).
*/
@ -246,10 +245,10 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
BUG_ON(start > 48);
/* Enable the sequencer */
/* Enable the sequencer if it's not already on */
reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
reg[0] |= WM8903_WSEQ_ENA;
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] | WM8903_WSEQ_ENA);
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
@ -268,9 +267,8 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
dev_dbg(&i2c->dev, "Sequence complete\n");
/* Disable the sequencer again */
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
reg[0] & ~WM8903_WSEQ_ENA);
/* Disable the sequencer again if we enabled it */
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
return 0;
}
@ -1578,7 +1576,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
wm8903_reset(codec);
/* Set up GPIOs */
/* Set up GPIOs and microphone detection */
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
if (!pdata->gpio_cfg[i])
@ -1587,6 +1585,16 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
pdata->gpio_cfg[i] & 0xffff);
}
snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
pdata->micdet_cfg);
/* Microphone detection needs the WSEQ clock */
if (pdata->micdet_cfg)
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
wm8903->mic_delay = pdata->micdet_delay;
}
/* power on device */

22
sound/soc/codecs/wm8903.h
View File

@ -172,28 +172,6 @@ extern struct snd_soc_codec_device soc_codec_dev_wm8903;
#define WM8903_VMID_RES_250K 3
#define WM8903_VMID_RES_5K 4
/*
* R6 (0x06) - Mic Bias Control 0
*/
#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */
#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */
#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */
#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */
#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */
#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */
#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */
#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */
/*
* R8 (0x08) - Analogue DAC 0
*/