UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

mtd: nand: denali: remove unused CONFIG option and macros 

All of these macros are not used at all.
CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR is not used for anything but
defining SCRATCH_REG_ADDR.  The config option should go away as well.

I am removing some register macros.  They are not used, and do not
exist in recent IP versions.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
This commit is contained in:
Masahiro Yamada 2017-03-23 05:07:02 +09:00 committed by Boris Brezillon
parent c120e75e0e
commit 357cc408a4
3 changed files with 0 additions and 115 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/mtd/nand/Kconfig
View File

@ -59,17 +59,6 @@ config MTD_NAND_DENALI_DT
Enable the driver for NAND flash on platforms using a Denali NAND
controller as a DT device.
config MTD_NAND_DENALI_SCRATCH_REG_ADDR
hex "Denali NAND size scratch register address"
default "0xFF108018"
depends on MTD_NAND_DENALI_PCI
help
Some platforms place the NAND chip size in a scratch register
because (some versions of) the driver aren't able to automatically
determine the size of certain chips. Set the address of the
scratch register here to enable this feature. On Intel Moorestown
boards, the scratch register is at 0xFF108018.
config MTD_NAND_GPIO
tristate "GPIO assisted NAND Flash driver"
depends on GPIOLIB || COMPILE_TEST

5
drivers/mtd/nand/denali.c
View File

@ -91,11 +91,6 @@ static inline struct denali_nand_info *mtd_to_denali(struct mtd_info *mtd)
#define DENALI_READ 0
#define DENALI_WRITE 0x100
/* types of device accesses. We can issue commands and get status */
#define COMMAND_CYCLE 0
#define ADDR_CYCLE 1
#define STATUS_CYCLE 2
/*
* this is a helper macro that allows us to
* format the bank into the proper bits for the controller

99
drivers/mtd/nand/denali.h
View File

@ -257,26 +257,6 @@
#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50))
#define DATA_INTR 0x550
#define DATA_INTR__WRITE_SPACE_AV 0x0001
#define DATA_INTR__READ_DATA_AV 0x0002
#define DATA_INTR_EN 0x560
#define DATA_INTR_EN__WRITE_SPACE_AV 0x0001
#define DATA_INTR_EN__READ_DATA_AV 0x0002
#define GPREG_0 0x570
#define GPREG_0__VALUE 0xffff
#define GPREG_1 0x580
#define GPREG_1__VALUE 0xffff
#define GPREG_2 0x590
#define GPREG_2__VALUE 0xffff
#define GPREG_3 0x5a0
#define GPREG_3__VALUE 0xffff
#define ECC_THRESHOLD 0x600
#define ECC_THRESHOLD__VALUE 0x03ff
@ -331,69 +311,15 @@
#define CHNL_ACTIVE__CHANNEL2 0x0004
#define CHNL_ACTIVE__CHANNEL3 0x0008
#define ACTIVE_SRC_ID 0x800
#define ACTIVE_SRC_ID__VALUE 0x00ff
#define PTN_INTR 0x810
#define PTN_INTR__CONFIG_ERROR 0x0001
#define PTN_INTR__ACCESS_ERROR_BANK0 0x0002
#define PTN_INTR__ACCESS_ERROR_BANK1 0x0004
#define PTN_INTR__ACCESS_ERROR_BANK2 0x0008
#define PTN_INTR__ACCESS_ERROR_BANK3 0x0010
#define PTN_INTR__REG_ACCESS_ERROR 0x0020
#define PTN_INTR_EN 0x820
#define PTN_INTR_EN__CONFIG_ERROR 0x0001
#define PTN_INTR_EN__ACCESS_ERROR_BANK0 0x0002
#define PTN_INTR_EN__ACCESS_ERROR_BANK1 0x0004
#define PTN_INTR_EN__ACCESS_ERROR_BANK2 0x0008
#define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010
#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
#define PERM_SRC_ID(__bank) (0x830 + ((__bank) * 0x40))
#define PERM_SRC_ID__SRCID 0x00ff
#define PERM_SRC_ID__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID__READ_ACTIVE 0x4000
#define PERM_SRC_ID__PARTITION_VALID 0x8000
#define MIN_BLK_ADDR(__bank) (0x840 + ((__bank) * 0x40))
#define MIN_BLK_ADDR__VALUE 0xffff
#define MAX_BLK_ADDR(__bank) (0x850 + ((__bank) * 0x40))
#define MAX_BLK_ADDR__VALUE 0xffff
#define MIN_MAX_BANK(__bank) (0x860 + ((__bank) * 0x40))
#define MIN_MAX_BANK__MIN_VALUE 0x0003
#define MIN_MAX_BANK__MAX_VALUE 0x000c
/* ffsdefs.h */
#define CLEAR 0 /*use this to clear a field instead of "fail"*/
#define SET 1 /*use this to set a field instead of "pass"*/
#define FAIL 1 /*failed flag*/
#define PASS 0 /*success flag*/
#define ERR -1 /*error flag*/
/* lld.h */
#define GOOD_BLOCK 0
#define DEFECTIVE_BLOCK 1
#define READ_ERROR 2
#define CLK_X 5
#define CLK_MULTI 4
/* KBV - Updated to LNW scratch register address */
#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR
#define SCRATCH_REG_SIZE 64
#define GLOB_HWCTL_DEFAULT_BLKS 2048
#define SUPPORT_15BITECC 1
#define SUPPORT_8BITECC 1
#define CUSTOM_CONF_PARAMS 0
#define ONFI_BLOOM_TIME 1
#define MODE5_WORKAROUND 0
@ -403,31 +329,6 @@
#define MODE_10 0x08000000
#define MODE_11 0x0C000000
#define DATA_TRANSFER_MODE 0
#define PROTECTION_PER_BLOCK 1
#define LOAD_WAIT_COUNT 2
#define PROGRAM_WAIT_COUNT 3
#define ERASE_WAIT_COUNT 4
#define INT_MONITOR_CYCLE_COUNT 5
#define READ_BUSY_PIN_ENABLED 6
#define MULTIPLANE_OPERATION_SUPPORT 7
#define PRE_FETCH_MODE 8
#define CE_DONT_CARE_SUPPORT 9
#define COPYBACK_SUPPORT 10
#define CACHE_WRITE_SUPPORT 11
#define CACHE_READ_SUPPORT 12
#define NUM_PAGES_IN_BLOCK 13
#define ECC_ENABLE_SELECT 14
#define WRITE_ENABLE_2_READ_ENABLE 15
#define ADDRESS_2_DATA 16
#define READ_ENABLE_2_WRITE_ENABLE 17
#define TWO_ROW_ADDRESS_CYCLES 18
#define MULTIPLANE_ADDRESS_RESTRICT 19
#define ACC_CLOCKS 20
#define READ_WRITE_ENABLE_LOW_COUNT 21
#define READ_WRITE_ENABLE_HIGH_COUNT 22
#define ECC_SECTOR_SIZE 512
struct nand_buf {