dt-bindings: pinctrl: aspeed: Split bindings document in two
Have one for each of the AST2400 and AST2500. The only thing that was common was the fact that both support ASPEED BMC SoCs. Cc: Johnny Huang <johnny_huang@aspeedtech.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20190628023838.15426-2-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Andrew Jeffery
Linus Walleij
parent
4b7618fdc7
commit
34ae69998b
|
|
@ -0,0 +1,80 @@
|
|||
=============================
|
||||
Aspeed AST2400 Pin Controller
|
||||
=============================
|
||||
|
||||
Required properties for the AST2400:
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2400-pinctrl"
|
||||
"aspeed,g4-pinctrl"
|
||||
|
||||
The pin controller node should be the child of a syscon node with the required
|
||||
property:
|
||||
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2400-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g4-scu", "syscon", "simple-mfd"
|
||||
|
||||
Refer to the the bindings described in
|
||||
Documentation/devicetree/bindings/mfd/syscon.txt
|
||||
|
||||
Subnode Format
|
||||
==============
|
||||
|
||||
The required properties of pinmux child nodes are:
|
||||
- function: the mux function to select
|
||||
- groups : the list of groups to select with this function
|
||||
|
||||
Required properties of pinconf child nodes are:
|
||||
- groups: A list of groups to select (either this or "pins" must be
|
||||
specified)
|
||||
- pins : A list of ball names as strings, eg "D14" (either this or "groups"
|
||||
must be specified)
|
||||
|
||||
Optional properties of pinconf child nodes are:
|
||||
- bias-disable : disable any pin bias
|
||||
- bias-pull-down: pull down the pin
|
||||
- drive-strength: sink or source at most X mA
|
||||
|
||||
Definitions are as specified in
|
||||
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any
|
||||
further limitations as described above.
|
||||
|
||||
For pinmux, each mux function has only one associated pin group. Each group is
|
||||
named by its function. The following values for the function and groups
|
||||
properties are supported:
|
||||
|
||||
ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
|
||||
ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
|
||||
GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
|
||||
I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
|
||||
MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
|
||||
NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
|
||||
PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
|
||||
ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
|
||||
SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
|
||||
SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
|
||||
TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1
|
||||
USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1
|
||||
WDTRST2
|
||||
|
||||
Example
|
||||
=======
|
||||
|
||||
syscon: scu@1e6e2000 {
|
||||
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g4-pinctrl";
|
||||
|
||||
pinctrl_i2c3_default: i2c3_default {
|
||||
function = "I2C3";
|
||||
groups = "I2C3";
|
||||
};
|
||||
|
||||
pinctrl_gpioh0_unbiased_default: gpioh0 {
|
||||
pins = "A8";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,14 +1,6 @@
|
|||
======================
|
||||
Aspeed Pin Controllers
|
||||
======================
|
||||
|
||||
The Aspeed SoCs vary in functionality inside a generation but have a common mux
|
||||
device register layout.
|
||||
|
||||
Required properties for g4:
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2400-pinctrl"
|
||||
"aspeed,g4-pinctrl"
|
||||
=============================
|
||||
Aspeed AST2500 Pin Controller
|
||||
=============================
|
||||
|
||||
Required properties for g5:
|
||||
- compatible : Should be one of the following:
|
||||
|
|
@ -23,8 +15,6 @@ The pin controller node should be the child of a syscon node with the required
|
|||
property:
|
||||
|
||||
- compatible : Should be one of the following:
|
||||
"aspeed,ast2400-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g4-scu", "syscon", "simple-mfd"
|
||||
"aspeed,ast2500-scu", "syscon", "simple-mfd"
|
||||
"aspeed,g5-scu", "syscon", "simple-mfd"
|
||||
|
||||
|
|
@ -57,24 +47,6 @@ For pinmux, each mux function has only one associated pin group. Each group is
|
|||
named by its function. The following values for the function and groups
|
||||
properties are supported:
|
||||
|
||||
aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
|
||||
|
||||
ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
|
||||
ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
|
||||
GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
|
||||
I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
|
||||
MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
|
||||
NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
|
||||
PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
|
||||
ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
|
||||
SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
|
||||
SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
|
||||
TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1
|
||||
USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1
|
||||
WDTRST2
|
||||
|
||||
aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
|
||||
|
||||
ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
|
||||
ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
|
||||
GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
|
||||
|
|
@ -90,33 +62,8 @@ SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
|
|||
TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS
|
||||
VGAVS VPI24 VPO WDTRST1 WDTRST2
|
||||
|
||||
Examples
|
||||
========
|
||||
|
||||
g4 Example
|
||||
----------
|
||||
|
||||
syscon: scu@1e6e2000 {
|
||||
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
|
||||
reg = <0x1e6e2000 0x1a8>;
|
||||
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g4-pinctrl";
|
||||
|
||||
pinctrl_i2c3_default: i2c3_default {
|
||||
function = "I2C3";
|
||||
groups = "I2C3";
|
||||
};
|
||||
|
||||
pinctrl_gpioh0_unbiased_default: gpioh0 {
|
||||
pins = "A8";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
g5 Example
|
||||
----------
|
||||
Example
|
||||
=======
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
Loading…
Reference in New Issue