Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...

Documentation/DocBook/mtdnand.tmpl

@@ -568,7 +568,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 			<para>
 				The blocks in which the tables are stored are procteted against
 				accidental access by marking them bad in the memory bad block
-				table. The bad block table managment functions are allowed
+				table. The bad block table management functions are allowed
 				to circumvernt this protection.
 			</para>
 			<para>

Documentation/DocBook/scsi.tmpl

@@ -317,7 +317,7 @@
         <para>
           The SAS transport class contains common code to deal with SAS HBAs,
           an aproximated representation of SAS topologies in the driver model,
-          and various sysfs attributes to expose these topologies and managment
+          and various sysfs attributes to expose these topologies and management
           interfaces to userspace.
         </para>
         <para>

Documentation/SubmittingPatches

@@ -183,7 +183,7 @@ the MAN-PAGES maintainer (as listed in the MAINTAINERS file)
 a man-pages patch, or at least a notification of the change,
 so that some information makes its way into the manual pages.
 
-Even if the maintainer did not respond in step #4, make sure to ALWAYS
+Even if the maintainer did not respond in step #5, make sure to ALWAYS
 copy the maintainer when you change their code.
 
 For small patches you may want to CC the Trivial Patch Monkey

Documentation/filesystems/nfsroot.txt

@@ -105,7 +105,7 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 		the client address and this parameter is NOT empty only
 		replies from the specified server are accepted.
 
-		Only required for for NFS root. That is autoconfiguration
+		Only required for NFS root. That is autoconfiguration
 		will not be triggered if it is missing and NFS root is not
 		in operation.
 

Documentation/gcov.txt

@@ -47,7 +47,7 @@ Possible uses:
 
 Configure the kernel with:
 
-        CONFIG_DEBUGFS=y
+        CONFIG_DEBUG_FS=y
         CONFIG_GCOV_KERNEL=y
 
 and to get coverage data for the entire kernel:

Documentation/hwmon/hpfall.c

@@ -16,6 +16,34 @@
 #include <stdint.h>
 #include <errno.h>
 #include <signal.h>
+#include <sys/mman.h>
+#include <sched.h>
+
+char unload_heads_path[64];
+
+int set_unload_heads_path(char *device)
+{
+	char devname[64];
+
+	if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0)
+		return -EINVAL;
+	strncpy(devname, device + 5, sizeof(devname));
+
+	snprintf(unload_heads_path, sizeof(unload_heads_path),
+				"/sys/block/%s/device/unload_heads", devname);
+	return 0;
+}
+int valid_disk(void)
+{
+	int fd = open(unload_heads_path, O_RDONLY);
+	if (fd < 0) {
+		perror(unload_heads_path);
+		return 0;
+	}
+
+	close(fd);
+	return 1;
+}
 
 void write_int(char *path, int i)
 {
@@ -40,7 +68,7 @@ void set_led(int on)
 
 void protect(int seconds)
 {
-	write_int("/sys/block/sda/device/unload_heads", seconds*1000);
+	write_int(unload_heads_path, seconds*1000);
 }
 
 int on_ac(void)
@@ -57,45 +85,62 @@ void ignore_me(void)
 {
 	protect(0);
 	set_led(0);
-
 }
 
-int main(int argc, char* argv[])
+int main(int argc, char **argv)
 {
-       int fd, ret;
+	int fd, ret;
+	struct sched_param param;
 
-       fd = open("/dev/freefall", O_RDONLY);
+	if (argc == 1)
-       if (fd < 0) {
+		ret = set_unload_heads_path("/dev/sda");
-               perror("open");
+	else if (argc == 2)
-               return EXIT_FAILURE;
+		ret = set_unload_heads_path(argv[1]);
-       }
+	else
+		ret = -EINVAL;
+
+	if (ret || !valid_disk()) {
+		fprintf(stderr, "usage: %s <device> (default: /dev/sda)\n",
+				argv[0]);
+		exit(1);
+	}
+
+	fd = open("/dev/freefall", O_RDONLY);
+	if (fd < 0) {
+		perror("/dev/freefall");
+		return EXIT_FAILURE;
+	}
+
+	daemon(0, 0);
+	param.sched_priority = sched_get_priority_max(SCHED_FIFO);
+	sched_setscheduler(0, SCHED_FIFO, &param);
+	mlockall(MCL_CURRENT|MCL_FUTURE);
 
 	signal(SIGALRM, ignore_me);
 
-       for (;;) {
+	for (;;) {
-	       unsigned char count;
+		unsigned char count;
 
-               ret = read(fd, &count, sizeof(count));
+		ret = read(fd, &count, sizeof(count));
-	       alarm(0);
+		alarm(0);
-	       if ((ret == -1) && (errno == EINTR)) {
+		if ((ret == -1) && (errno == EINTR)) {
-		       /* Alarm expired, time to unpark the heads */
+			/* Alarm expired, time to unpark the heads */
-		       continue;
+			continue;
-	       }
+		}
 
-               if (ret != sizeof(count)) {
+		if (ret != sizeof(count)) {
-                       perror("read");
+			perror("read");
-                       break;
+			break;
-               }
+		}
 
-	       protect(21);
+		protect(21);
-	       set_led(1);
+		set_led(1);
-	       if (1 || on_ac() || lid_open()) {
+		if (1 || on_ac() || lid_open())
-		       alarm(2);
+			alarm(2);
-	       } else {
+		else
-		       alarm(20);
+			alarm(20);
-	       }
+	}
-       }
 
-       close(fd);
+	close(fd);
-       return EXIT_SUCCESS;
+	return EXIT_SUCCESS;
 }

Documentation/hwmon/pc87427

@@ -34,5 +34,5 @@ Fan rotation speeds are reported as 14-bit values from a gated clock
 signal. Speeds down to 83 RPM can be measured.
 
 An alarm is triggered if the rotation speed drops below a programmable
-limit. Another alarm is triggered if the speed is too low to to be measured
+limit. Another alarm is triggered if the speed is too low to be measured
 (including stalled or missing fan).

Documentation/kernel-parameters.txt

@@ -933,7 +933,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			1 -- enable informational integrity auditing messages.
 
 	ima_hash=	[IMA]
-			Formt: { "sha1" | "md5" }
+			Format: { "sha1" | "md5" }
 			default: "sha1"
 
 	ima_tcb		[IMA]

Documentation/networking/regulatory.txt

@@ -96,7 +96,7 @@ Example code - drivers hinting an alpha2:
 
 This example comes from the zd1211rw device driver. You can start
 by having a mapping of your device's EEPROM country/regulatory
-domain value to to a specific alpha2 as follows:
+domain value to a specific alpha2 as follows:
 
 static struct zd_reg_alpha2_map reg_alpha2_map[] = {
 	{ ZD_REGDOMAIN_FCC, "US" },

Documentation/powerpc/dts-bindings/marvell.txt

@@ -32,7 +32,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
       devices.  This field represents the number of cells needed to
       represent the address of the memory-mapped registers of devices
       within the system controller chip.
-    - #size-cells : Size representation for for the memory-mapped
+    - #size-cells : Size representation for the memory-mapped
       registers within the system controller chip.
     - #interrupt-cells : Defines the width of cells used to represent
       interrupts.

Documentation/scsi/ChangeLog.megaraid

@@ -514,7 +514,7 @@ iv.	Remove yield() while mailbox handshake in synchronous commands
 
 v.	Remove redundant __megaraid_busywait_mbox routine
 
-vi.	Fix bug in the managment module, which causes a system lockup when the
+vi.	Fix bug in the management module, which causes a system lockup when the
 	IO module is loaded and then unloaded, followed by executing any
 	management utility. The current version of management module does not
 	handle the adapter unregister properly.

Documentation/scsi/scsi_fc_transport.txt

@@ -378,7 +378,7 @@ Vport Disable/Enable:
       int vport_disable(struct fc_vport *vport, bool disable)
 
     where:
-      vport:    Is vport to to be enabled or disabled
+      vport:    Is vport to be enabled or disabled
       disable:  If "true", the vport is to be disabled.
                 If "false", the vport is to be enabled.
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -387,7 +387,7 @@ STAC92HD73*
 STAC92HD83*
 ===========
   ref		Reference board
-  mic-ref	Reference board with power managment for ports
+  mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
   auto		BIOS setup (default)
 

Documentation/sysctl/kernel.txt

@@ -319,25 +319,29 @@ This option can be used to select the type of process address
 space randomization that is used in the system, for architectures
 that support this feature.
 
-0 - Turn the process address space randomization off by default.
+0 - Turn the process address space randomization off.  This is the
+    default for architectures that do not support this feature anyways,
+    and kernels that are booted with the "norandmaps" parameter.
 
 1 - Make the addresses of mmap base, stack and VDSO page randomized.
     This, among other things, implies that shared libraries will be
-    loaded to random addresses. Also for PIE-linked binaries, the location
+    loaded to random addresses.  Also for PIE-linked binaries, the
-    of code start is randomized.
+    location of code start is randomized.  This is the default if the
+    CONFIG_COMPAT_BRK option is enabled.
 
-    With heap randomization, the situation is a little bit more
+2 - Additionally enable heap randomization.  This is the default if
-    complicated.
+    CONFIG_COMPAT_BRK is disabled.
-    There a few legacy applications out there (such as some ancient
+
+    There are a few legacy applications out there (such as some ancient
     versions of libc.so.5 from 1996) that assume that brk area starts
-    just after the end of the code+bss. These applications break when
+    just after the end of the code+bss.  These applications break when
-    start of the brk area is randomized. There are however no known
+    start of the brk area is randomized.  There are however no known
     non-legacy applications that would be broken this way, so for most
-    systems it is safe to choose full randomization. However there is
+    systems it is safe to choose full randomization.
-    a CONFIG_COMPAT_BRK option for systems with ancient and/or broken
+
-    binaries, that makes heap non-randomized, but keeps all other
+    Systems with ancient and/or broken binaries should be configured
-    parts of process address space randomized if randomize_va_space
+    with CONFIG_COMPAT_BRK enabled, which excludes the heap from process
-    sysctl is turned on.
+    address space randomization.
 
 ==============================================================
 

Documentation/trace/events.txt

@@ -72,7 +72,7 @@ To enable all events in sched subsystem:
 
 	# echo 1 > /sys/kernel/debug/tracing/events/sched/enable
 
-To eanble all events:
+To enable all events:
 
 	# echo 1 > /sys/kernel/debug/tracing/events/enable
 

Documentation/trace/ftrace.txt

@@ -133,7 +133,7 @@ of ftrace. Here is a list of some of the key files:
 	than requested, the rest of the page will be used,
 	making the actual allocation bigger than requested.
 	( Note, the size may not be a multiple of the page size
-	  due to buffer managment overhead. )
+	  due to buffer management overhead. )
 
 	This can only be updated when the current_tracer
 	is set to "nop".

MAINTAINERS

@@ -2958,7 +2958,7 @@ F:	scripts/Makefile.*
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
-S:	Odd fixes
+S:	Maintained
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	"J. Bruce Fields" <bfields@fieldses.org>

arch/arm/Makefile

@@ -25,7 +25,7 @@ KBUILD_CFLAGS	+=$(call cc-option,-marm,)
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
-# defines filename extension depending memory manement type.
+# defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
 MMUEXT		:= -nommu
 endif

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -53,7 +53,7 @@ static void __init afeb9260_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-cam60.c

@@ -50,7 +50,7 @@ static void __init cam60_map_io(void)
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-neocore926.c

@@ -56,7 +56,7 @@ static void __init neocore926_map_io(void)
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */

arch/arm/mach-at91/board-qil-a9260.c

@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9260ek.c

@@ -54,7 +54,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9261ek.c

@@ -61,7 +61,7 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-sam9263ek.c

@@ -57,7 +57,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */

arch/arm/mach-at91/board-sam9g20ek.c

@@ -50,7 +50,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9rlek.c

@@ -43,7 +43,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */

arch/arm/mach-at91/board-usb-a9260.c

@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-usb-a9263.c

@@ -52,7 +52,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/blackfin/mach-bf538/include/mach/defBF539.h

@@ -2325,7 +2325,7 @@
 #define	AMBEN_B0_B1	0x0004	/* Enable Asynchronous Memory Banks 0 &	1 only */
 #define	AMBEN_B0_B1_B2	0x0006	/* Enable Asynchronous Memory Banks 0, 1, and 2 */
 #define	AMBEN_ALL	0x0008	/* Enable Asynchronous Memory Banks (all) 0, 1,	2, and 3 */
-#define	CDPRIO		0x0100	/* DMA has priority over core for for external accesses */
+#define	CDPRIO		0x0100	/* DMA has priority over core for external accesses */
 
 /* EBIU_AMGCTL Bit Positions */
 #define	AMCKEN_P		0x0000	/* Enable CLKOUT */

arch/frv/lib/cache.S

@@ -1,4 +1,4 @@
-/* cache.S: cache managment routines
+/* cache.S: cache management routines
  *
  * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)

arch/h8300/kernel/timer/tpu.c

@@ -7,7 +7,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>

arch/ia64/ia32/sys_ia32.c

@@ -1270,7 +1270,7 @@ putreg (struct task_struct *child, int regno, unsigned int value)
 	      case PT_CS:
 		if (value != __USER_CS)
 			printk(KERN_ERR
-			       "ia32.putreg: attempt to to set invalid segment register %d = %x\n",
+			       "ia32.putreg: attempt to set invalid segment register %d = %x\n",
 			       regno, value);
 		break;
 	      default:

arch/mn10300/include/asm/cacheflush.h

@@ -17,7 +17,7 @@
 #include <linux/mm.h>
 
 /*
- * virtually-indexed cache managment (our cache is physically indexed)
+ * virtually-indexed cache management (our cache is physically indexed)
  */
 #define flush_cache_all()			do {} while (0)
 #define flush_cache_mm(mm)			do {} while (0)
@@ -31,7 +31,7 @@
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
 
 /*
- * physically-indexed cache managment
+ * physically-indexed cache management
  */
 #ifndef CONFIG_MN10300_CACHE_DISABLED
 

arch/powerpc/kernel/udbg_16550.c

@@ -1,5 +1,5 @@
 /*
- * udbg for for NS16550 compatable serial ports
+ * udbg for NS16550 compatable serial ports
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *

arch/powerpc/platforms/powermac/udbg_scc.c

@@ -1,5 +1,5 @@
 /*
- * udbg for for zilog scc ports as found on Apple PowerMacs
+ * udbg for zilog scc ports as found on Apple PowerMacs
  *
  * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp
  *

arch/s390/hypfs/inode.c

@@ -496,7 +496,7 @@ static int __init hypfs_init(void)
 	}
 	s390_kobj = kobject_create_and_add("s390", hypervisor_kobj);
 	if (!s390_kobj) {
-		rc = -ENOMEM;;
+		rc = -ENOMEM;
 		goto fail_sysfs;
 	}
 	rc = register_filesystem(&hypfs_type);

arch/s390/kvm/interrupt.c

@@ -478,7 +478,7 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 	if (!inti)
 		return -ENOMEM;
 
-	inti->type = KVM_S390_PROGRAM_INT;;
+	inti->type = KVM_S390_PROGRAM_INT;
 	inti->pgm.code = code;
 
 	VCPU_EVENT(vcpu, 3, "inject: program check %d (from kernel)", code);

arch/sparc/kernel/irq_64.c

@@ -229,7 +229,7 @@ static unsigned int sun4u_compute_tid(unsigned long imap, unsigned long cpuid)
 				tid = ((a << IMAP_AID_SHIFT) |
 				       (n << IMAP_NID_SHIFT));
 				tid &= (IMAP_AID_SAFARI |
-					IMAP_NID_SAFARI);;
+					IMAP_NID_SAFARI);
 			}
 		} else {
 			tid = cpuid << IMAP_TID_SHIFT;

arch/um/drivers/net_kern.c

@@ -533,7 +533,7 @@ static int eth_parse(char *str, int *index_out, char **str_out,
 		     char **error_out)
 {
 	char *end;
-	int n, err = -EINVAL;;
+	int n, err = -EINVAL;
 
 	n = simple_strtoul(str, &end, 0);
 	if (end == str) {

arch/um/include/shared/ptrace_user.h

@@ -29,7 +29,7 @@ extern int ptrace_setregs(long pid, unsigned long *regs_in);
  * recompilation. So, we use PTRACE_OLDSETOPTIONS in UML.
  * We also want to be able to build the kernel on 2.4, which doesn't
  * have PTRACE_OLDSETOPTIONS. So, if it is missing, we declare
- * PTRACE_OLDSETOPTIONS to to be the same as PTRACE_SETOPTIONS.
+ * PTRACE_OLDSETOPTIONS to be the same as PTRACE_SETOPTIONS.
  *
  * On architectures, that start to support PTRACE_O_TRACESYSGOOD on
  * linux 2.6, PTRACE_OLDSETOPTIONS never is defined, and also isn't

arch/x86/kernel/cpu/amd.c

@@ -184,7 +184,7 @@ static void __cpuinit amd_k7_smp_check(struct cpuinfo_x86 *c)
 	 * approved Athlon
 	 */
 	WARN_ONCE(1, "WARNING: This combination of AMD"
-		"processors is not suitable for SMP.\n");
+		" processors is not suitable for SMP.\n");
 	if (!test_taint(TAINT_UNSAFE_SMP))
 		add_taint(TAINT_UNSAFE_SMP);
 

drivers/ata/pata_hpt37x.c

@@ -624,7 +624,7 @@ static struct ata_port_operations hpt374_fn1_port_ops = {
 };
 
 /**
- *	htp37x_clock_slot	-	Turn timing to PC clock entry
+ *	hpt37x_clock_slot	-	Turn timing to PC clock entry
  *	@freq: Reported frequency timing
  *	@base: Base timing
  *

drivers/block/DAC960.c

@@ -6653,7 +6653,7 @@ static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
 	else ErrorCode = get_user(ControllerNumber,
 			     &UserSpaceControllerInfo->ControllerNumber);
 	if (ErrorCode != 0)
-		break;;
+		break;
 	ErrorCode = -ENXIO;
 	if (ControllerNumber < 0 ||
 	    ControllerNumber > DAC960_ControllerCount - 1) {
@@ -6661,7 +6661,7 @@ static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
 	}
 	Controller = DAC960_Controllers[ControllerNumber];
 	if (Controller == NULL)
-		break;;
+		break;
 	memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
 	ControllerInfo.ControllerNumber = ControllerNumber;
 	ControllerInfo.FirmwareType = Controller->FirmwareType;
@@ -7210,7 +7210,7 @@ static struct pci_driver DAC960_pci_driver = {
 	.remove		= DAC960_Remove,
 };
 
-static int DAC960_init_module(void)
+static int __init DAC960_init_module(void)
 {
 	int ret;
 
@@ -7222,7 +7222,7 @@ static int DAC960_init_module(void)
 	return ret;
 }
 
-static void DAC960_cleanup_module(void)
+static void __exit DAC960_cleanup_module(void)
 {
 	int i;
 

drivers/block/swim3.c

@@ -1062,7 +1062,7 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
 		goto out_release;
 	}
 	fs->swim3_intr = macio_irq(mdev, 0);
-	fs->dma_intr = macio_irq(mdev, 1);;
+	fs->dma_intr = macio_irq(mdev, 1);
 	fs->cur_cyl = -1;
 	fs->cur_sector = -1;
 	fs->secpercyl = 36;

drivers/char/agp/uninorth-agp.c

@@ -270,7 +270,7 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
 
 	if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
 		/*
-		 * We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
+		 * We need to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
 		 * 2.2 and 2.3, Darwin do so.
 		 */
 		if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)

drivers/char/epca.c

@@ -2239,7 +2239,7 @@ static void do_softint(struct work_struct *work)
 	struct channel *ch = container_of(work, struct channel, tqueue);
 	/* Called in response to a modem change event */
 	if (ch && ch->magic == EPCA_MAGIC) {
-		struct tty_struct *tty = tty_port_tty_get(&ch->port);;
+		struct tty_struct *tty = tty_port_tty_get(&ch->port);
 
 		if (tty && tty->driver_data) {
 			if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {

drivers/char/ipmi/ipmi_poweroff.c

@@ -691,7 +691,7 @@ static struct ctl_table_header *ipmi_table_header;
 /*
  * Startup and shutdown functions.
  */
-static int ipmi_poweroff_init(void)
+static int __init ipmi_poweroff_init(void)
 {
 	int rv;
 
@@ -725,7 +725,7 @@ static int ipmi_poweroff_init(void)
 }
 
 #ifdef MODULE
-static __exit void ipmi_poweroff_cleanup(void)
+static void __exit ipmi_poweroff_cleanup(void)
 {
 	int rv;
 

drivers/edac/edac_core.h

@@ -286,7 +286,7 @@ enum scrub_type {
  *			is irrespective of the memory devices being mounted
  *			on both sides of the memory stick.
  *
- * Socket set:		All of the memory sticks that are required for for
+ * Socket set:		All of the memory sticks that are required for
  *			a single memory access or all of the memory sticks
  *			spanned by a chip-select row.  A single socket set
  *			has two chip-select rows and if double-sided sticks

drivers/gpio/bt8xxgpio.c

@@ -331,13 +331,13 @@ static struct pci_driver bt8xxgpio_pci_driver = {
 	.resume		= bt8xxgpio_resume,
 };
 
-static int bt8xxgpio_init(void)
+static int __init bt8xxgpio_init(void)
 {
 	return pci_register_driver(&bt8xxgpio_pci_driver);
 }
 module_init(bt8xxgpio_init)
 
-static void bt8xxgpio_exit(void)
+static void __exit bt8xxgpio_exit(void)
 {
 	pci_unregister_driver(&bt8xxgpio_pci_driver);
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -232,7 +232,7 @@ intel_dp_aux_ch(struct intel_output *intel_output,
 	for (try = 0; try < 5; try++) {
 		/* Load the send data into the aux channel data registers */
 		for (i = 0; i < send_bytes; i += 4) {
-			uint32_t    d = pack_aux(send + i, send_bytes - i);;
+			uint32_t    d = pack_aux(send + i, send_bytes - i);
 	
 			I915_WRITE(ch_data + i, d);
 		}

drivers/gpu/drm/mga/mga_state.c

@@ -239,7 +239,7 @@ static __inline__ void mga_g200_emit_pipe(drm_mga_private_t * dev_priv)
 		  MGA_WR34, 0x00000000,
 		  MGA_WR42, 0x0000ffff, MGA_WR60, 0x0000ffff);
 
-	/* Padding required to to hardware bug.
+	/* Padding required due to hardware bug.
 	 */
 	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,
@@ -317,7 +317,7 @@ static __inline__ void mga_g400_emit_pipe(drm_mga_private_t * dev_priv)
 		  MGA_WR52, MGA_G400_WR_MAGIC,	/* tex1 width        */
 		  MGA_WR60, MGA_G400_WR_MAGIC);	/* tex1 height       */
 
-	/* Padding required to to hardware bug */
+	/* Padding required due to hardware bug */
 	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,
 		  MGA_DMAPAD, 0xffffffff,

drivers/ide/ide-probe.c

@@ -1212,7 +1212,7 @@ static int ide_find_port_slot(const struct ide_port_info *d)
 {
 	int idx = -ENOENT;
 	u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1;
-	u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;;
+	u8 i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0;
 
 	/*
 	 * Claim an unassigned slot.

drivers/ide/umc8672.c

@@ -170,9 +170,9 @@ static int __init umc8672_init(void)
 		goto out;
 
 	if (umc8672_probe() == 0)
-		return 0;;
+		return 0;
 out:
-	return -ENODEV;;
+	return -ENODEV;
 }
 
 module_init(umc8672_init);

drivers/infiniband/hw/ipath/ipath_iba6110.c

@@ -809,7 +809,7 @@ static int ipath_setup_ht_reset(struct ipath_devdata *dd)
  * errors.  We only bother to do this at load time, because it's OK if
  * it happened before we were loaded (first time after boot/reset),
  * but any time after that, it's fatal anyway.  Also need to not check
- * for for upper byte errors if we are in 8 bit mode, so figure out
+ * for upper byte errors if we are in 8 bit mode, so figure out
  * our width.  For now, at least, also complain if it's 8 bit.
  */
 static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev,

drivers/input/keyboard/atkbd.c

@@ -229,7 +229,7 @@ struct atkbd {
 };
 
 /*
- * System-specific ketymap fixup routine
+ * System-specific keymap fixup routine
  */
 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
 static void *atkbd_platform_fixup_data;

drivers/isdn/capi/capiutil.c

@@ -1019,7 +1019,7 @@ int __init cdebug_init(void)
 	if (!g_debbuf->buf) {
 		kfree(g_cmsg);
 		kfree(g_debbuf);
-		return -ENOMEM;;
+		return -ENOMEM;
 	}
 	g_debbuf->size = CDEBUG_GSIZE;
 	g_debbuf->buf[0] = 0;

drivers/isdn/i4l/isdn_common.c

@@ -761,7 +761,7 @@ isdn_getnum(char **p)
  * Be aware that this is not an atomic operation when sleep != 0, even though 
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes
@@ -873,7 +873,7 @@ isdn_readbchan(int di, int channel, u_char * buf, u_char * fp, int len, wait_que
  * Be aware that this is not an atomic operation when sleep != 0, even though
  * interrupts are turned off! Well, like that we are currently only called
  * on behalf of a read system call on raw device files (which are documented
- * to be dangerous and for for debugging purpose only). The inode semaphore
+ * to be dangerous and for debugging purpose only). The inode semaphore
  * takes care that this is not called for the same minor device number while
  * we are sleeping, but access is not serialized against simultaneous read()
  * from the corresponding ttyI device. Can other ugly events, like changes

drivers/lguest/page_tables.c

@@ -894,7 +894,7 @@ void guest_set_pte(struct lg_cpu *cpu,
  * tells us they've changed.  When the Guest tries to use the new entry it will
  * fault and demand_page() will fix it up.
  *
- * So with that in mind here's our code to to update a (top-level) PGD entry:
+ * So with that in mind here's our code to update a (top-level) PGD entry:
  */
 void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 {

drivers/macintosh/rack-meter.c

@@ -274,7 +274,7 @@ static void __devinit rackmeter_init_cpu_sniffer(struct rackmeter *rm)
 
 		if (cpu > 1)
 			continue;
-		rcpu = &rm->cpu[cpu];;
+		rcpu = &rm->cpu[cpu];
 		rcpu->prev_idle = get_cpu_idle_time(cpu);
 		rcpu->prev_wall = jiffies64_to_cputime64(get_jiffies_64());
 		schedule_delayed_work_on(cpu, &rm->cpu[cpu].sniffer,

drivers/md/md.h

@@ -201,7 +201,7 @@ struct mddev_s
 	 * INTR:     resync needs to be aborted for some reason
 	 * DONE:     thread is done and is waiting to be reaped
 	 * REQUEST:  user-space has requested a sync (used with SYNC)
-	 * CHECK:    user-space request for for check-only, no repair
+	 * CHECK:    user-space request for check-only, no repair
 	 * RESHAPE:  A reshape is happening
 	 *
 	 * If neither SYNC or RESHAPE are set, then it is a recovery.

drivers/media/dvb/siano/smscoreapi.c

@@ -1367,7 +1367,7 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level)
 					    &msg, sizeof(msg));
 }
 
-/* new GPIO managment implementation */
+/* new GPIO management implementation */
 static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
 		u32 *pGroupNum, u32 *pGroupCfg) {
 

drivers/media/dvb/siano/smscoreapi.h

@@ -657,12 +657,12 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev);
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
-/* old GPIO managment */
+/* old GPIO management */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
 			   struct smscore_config_gpio *pinconfig);
 int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
 
-/* new GPIO managment */
+/* new GPIO management */
 extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
 		struct smscore_gpio_config *pGpioConfig);
 extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,

drivers/media/radio/radio-mr800.c

@@ -46,7 +46,7 @@
  * Version 0.11:	Converted to v4l2_device.
  *
  * Many things to do:
- * 	- Correct power managment of device (suspend & resume)
+ * 	- Correct power management of device (suspend & resume)
  * 	- Add code for scanning and smooth tuning
  * 	- Add code for sensitivity value
  * 	- Correct mistakes

drivers/media/video/cx88/cx88-blackbird.c

@@ -1371,7 +1371,7 @@ static struct cx8802_driver cx8802_blackbird_driver = {
 	.advise_release	= cx8802_blackbird_advise_release,
 };
 
-static int blackbird_init(void)
+static int __init blackbird_init(void)
 {
 	printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n",
 	       (CX88_VERSION_CODE >> 16) & 0xff,
@@ -1384,7 +1384,7 @@ static int blackbird_init(void)
 	return cx8802_register_driver(&cx8802_blackbird_driver);
 }
 
-static void blackbird_fini(void)
+static void __exit blackbird_fini(void)
 {
 	cx8802_unregister_driver(&cx8802_blackbird_driver);
 }

drivers/media/video/cx88/cx88-dvb.c

@@ -1350,7 +1350,7 @@ static struct cx8802_driver cx8802_dvb_driver = {
 	.advise_release = cx8802_dvb_advise_release,
 };
 
-static int dvb_init(void)
+static int __init dvb_init(void)
 {
 	printk(KERN_INFO "cx88/2: cx2388x dvb driver version %d.%d.%d loaded\n",
 	       (CX88_VERSION_CODE >> 16) & 0xff,
@@ -1363,7 +1363,7 @@ static int dvb_init(void)
 	return cx8802_register_driver(&cx8802_dvb_driver);
 }
 
-static void dvb_fini(void)
+static void __exit dvb_fini(void)
 {
 	cx8802_unregister_driver(&cx8802_dvb_driver);
 }

drivers/media/video/cx88/cx88-mpeg.c

@@ -870,7 +870,7 @@ static struct pci_driver cx8802_pci_driver = {
 	.remove   = __devexit_p(cx8802_remove),
 };
 
-static int cx8802_init(void)
+static int __init cx8802_init(void)
 {
 	printk(KERN_INFO "cx88/2: cx2388x MPEG-TS Driver Manager version %d.%d.%d loaded\n",
 	       (CX88_VERSION_CODE >> 16) & 0xff,
@@ -883,7 +883,7 @@ static int cx8802_init(void)
 	return pci_register_driver(&cx8802_pci_driver);
 }
 
-static void cx8802_fini(void)
+static void __exit cx8802_fini(void)
 {
 	pci_unregister_driver(&cx8802_pci_driver);
 }

drivers/media/video/cx88/cx88-video.c

@@ -2113,7 +2113,7 @@ static struct pci_driver cx8800_pci_driver = {
 #endif
 };
 
-static int cx8800_init(void)
+static int __init cx8800_init(void)
 {
 	printk(KERN_INFO "cx88/0: cx2388x v4l2 driver version %d.%d.%d loaded\n",
 	       (CX88_VERSION_CODE >> 16) & 0xff,
@@ -2126,7 +2126,7 @@ static int cx8800_init(void)
 	return pci_register_driver(&cx8800_pci_driver);
 }
 
-static void cx8800_fini(void)
+static void __exit cx8800_fini(void)
 {
 	pci_unregister_driver(&cx8800_pci_driver);
 }

drivers/media/video/gspca/m5602/m5602_core.c

@@ -56,7 +56,7 @@ int m5602_read_bridge(struct sd *sd, const u8 address, u8 *i2c_data)
 	return (err < 0) ? err : 0;
 }
 
-/* Writes a byte to to the m5602 */
+/* Writes a byte to the m5602 */
 int m5602_write_bridge(struct sd *sd, const u8 address, const u8 i2c_data)
 {
 	int err;

drivers/message/fusion/mptbase.c

@@ -6821,7 +6821,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 	*size = y;
 }
 /**
- *	mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ *	mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
  *	@ioc: Pointer to MPT_ADAPTER structure
  *
  *	Returns 0 for SUCCESS or -1 if FAILED.
@@ -6854,7 +6854,7 @@ mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
 
 /**
- *	mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ *	mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
  *	@ioc: Pointer to MPT_ADAPTER structure
  *
  **/

drivers/mmc/host/mxcmmc.c

@@ -512,7 +512,7 @@ static void mxcmci_cmd_done(struct mxcmci_host *host, unsigned int stat)
 	}
 
 	/* For the DMA case the DMA engine handles the data transfer
-	 * automatically. For non DMA we have to to it ourselves.
+	 * automatically. For non DMA we have to do it ourselves.
 	 * Don't do it in interrupt context though.
 	 */
 	if (!mxcmci_use_dma(host) && host->data)

drivers/mtd/devices/m25p80.c

@@ -776,13 +776,13 @@ static struct spi_driver m25p80_driver = {
 };
 
 
-static int m25p80_init(void)
+static int __init m25p80_init(void)
 {
 	return spi_register_driver(&m25p80_driver);
 }
 
 
-static void m25p80_exit(void)
+static void __exit m25p80_exit(void)
 {
 	spi_unregister_driver(&m25p80_driver);
 }

drivers/mtd/devices/slram.c

@@ -303,7 +303,7 @@ __setup("slram=", mtd_slram_setup);
 
 #endif
 
-static int init_slram(void)
+static int __init init_slram(void)
 {
 	char *devname;
 	int i;

drivers/mtd/ftl.c

@@ -1099,7 +1099,7 @@ static struct mtd_blktrans_ops ftl_tr = {
 	.owner		= THIS_MODULE,
 };
 
-static int init_ftl(void)
+static int __init init_ftl(void)
 {
 	return register_mtd_blktrans(&ftl_tr);
 }

drivers/mtd/maps/ixp2000.c

@@ -184,7 +184,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	info->map.bankwidth = 1;
 
 	/*
- 	 * map_priv_2 is used to store a ptr to to the bank_setup routine
+ 	 * map_priv_2 is used to store a ptr to the bank_setup routine
  	 */
 	info->map.map_priv_2 = (unsigned long) ixp_data->bank_setup;
 

drivers/mtd/nand/cafe_nand.c

@@ -903,12 +903,12 @@ static struct pci_driver cafe_nand_pci_driver = {
 	.resume = cafe_nand_resume,
 };
 
-static int cafe_nand_init(void)
+static int __init cafe_nand_init(void)
 {
 	return pci_register_driver(&cafe_nand_pci_driver);
 }
 
-static void cafe_nand_exit(void)
+static void __exit cafe_nand_exit(void)
 {
 	pci_unregister_driver(&cafe_nand_pci_driver);
 }

drivers/mtd/nand/cmx270_nand.c

@@ -147,7 +147,7 @@ static int cmx270_device_ready(struct mtd_info *mtd)
 /*
  * Main initialization routine
  */
-static int cmx270_init(void)
+static int __init cmx270_init(void)
 {
 	struct nand_chip *this;
 	const char *part_type;
@@ -261,7 +261,7 @@ module_init(cmx270_init);
 /*
  * Clean up routine
  */
-static void cmx270_cleanup(void)
+static void __exit cmx270_cleanup(void)
 {
 	/* Release resources, unregister device */
 	nand_release(cmx270_nand_mtd);

drivers/mtd/ubi/eba.c

@@ -1065,7 +1065,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
 	}
 
 	/*
-	 * Now we have got to calculate how much data we have to to copy. In
+	 * Now we have got to calculate how much data we have to copy. In
 	 * case of a static volume it is fairly easy - the VID header contains
 	 * the data size. In case of a dynamic volume it is more difficult - we
 	 * have to read the contents, cut 0xFF bytes from the end and copy only

drivers/mtd/ubi/ubi.h

@@ -570,7 +570,7 @@ void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol,
 
 /*
  * ubi_rb_for_each_entry - walk an RB-tree.
- * @rb: a pointer to type 'struct rb_node' to to use as a loop counter
+ * @rb: a pointer to type 'struct rb_node' to use as a loop counter
  * @pos: a pointer to RB-tree entry type to use as a loop counter
  * @root: RB-tree's root
  * @member: the name of the 'struct rb_node' within the RB-tree entry

drivers/net/arcnet/arc-rawmode.c

@@ -123,7 +123,6 @@ static void rx(struct net_device *dev, int bufnum,
 	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
 
 	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
-;
 	netif_rx(skb);
 }
 

drivers/net/arcnet/capmode.c

@@ -149,7 +149,6 @@ static void rx(struct net_device *dev, int bufnum,
 	BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
 
 	skb->protocol = cpu_to_be16(ETH_P_ARCNET);
-;
 	netif_rx(skb);
 }
 

drivers/net/bnx2x_reg.h

@@ -3122,7 +3122,7 @@
    The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
    header pointer. */
 #define TCM_REG_XX_TABLE					 0x50240
-/* [RW 4] Load value for for cfc ac credit cnt. */
+/* [RW 4] Load value for cfc ac credit cnt. */
 #define TM_REG_CFC_AC_CRDCNT_VAL				 0x164208
 /* [RW 4] Load value for cfc cld credit cnt. */
 #define TM_REG_CFC_CLD_CRDCNT_VAL				 0x164210

drivers/net/bonding/bond_3ad.c

@@ -1987,7 +1987,7 @@ void bond_3ad_unbind_slave(struct slave *slave)
 			// find new aggregator for the related port(s)
 			new_aggregator = __get_first_agg(port);
 			for (; new_aggregator; new_aggregator = __get_next_agg(new_aggregator)) {
-				// if the new aggregator is empty, or it connected to to our port only
+				// if the new aggregator is empty, or it is connected to our port only
 				if (!new_aggregator->lag_ports || ((new_aggregator->lag_ports == port) && !new_aggregator->lag_ports->next_port_in_aggregator)) {
 					break;
 				}

drivers/net/e1000/e1000_hw.c

@@ -3035,7 +3035,7 @@ s32 e1000_check_for_link(struct e1000_hw *hw)
                 /* If TBI compatibility is was previously off, turn it on. For
                  * compatibility with a TBI link partner, we will store bad
                  * packets. Some frames have an additional byte on the end and
-                 * will look like CRC errors to to the hardware.
+                 * will look like CRC errors to the hardware.
                  */
                 if (!hw->tbi_compatibility_on) {
                     hw->tbi_compatibility_on = true;

drivers/net/gianfar_ethtool.c

@@ -293,7 +293,7 @@ static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 	rxtime  = get_ictt_value(priv->rxic);
 	rxcount = get_icft_value(priv->rxic);
 	txtime  = get_ictt_value(priv->txic);
-	txcount = get_icft_value(priv->txic);;
+	txcount = get_icft_value(priv->txic);
 	cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, rxtime);
 	cvals->rx_max_coalesced_frames = rxcount;
 

drivers/net/ibm_newemac/core.c

@@ -2556,13 +2556,13 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 	if (emac_read_uint_prop(np, "mdio-device", &dev->mdio_ph, 0))
 		dev->mdio_ph = 0;
 	if (emac_read_uint_prop(np, "zmii-device", &dev->zmii_ph, 0))
-		dev->zmii_ph = 0;;
+		dev->zmii_ph = 0;
 	if (emac_read_uint_prop(np, "zmii-channel", &dev->zmii_port, 0))
-		dev->zmii_port = 0xffffffff;;
+		dev->zmii_port = 0xffffffff;
 	if (emac_read_uint_prop(np, "rgmii-device", &dev->rgmii_ph, 0))
-		dev->rgmii_ph = 0;;
+		dev->rgmii_ph = 0;
 	if (emac_read_uint_prop(np, "rgmii-channel", &dev->rgmii_port, 0))
-		dev->rgmii_port = 0xffffffff;;
+		dev->rgmii_port = 0xffffffff;
 	if (emac_read_uint_prop(np, "fifo-entry-size", &dev->fifo_entry_size, 0))
 		dev->fifo_entry_size = 16;
 	if (emac_read_uint_prop(np, "mal-burst-size", &dev->mal_burst_size, 0))

drivers/net/igb/igb_main.c

@@ -3966,7 +3966,7 @@ static int igb_set_vf_multicasts(struct igb_adapter *adapter,
 	/* VFs are limited to using the MTA hash table for their multicast
 	 * addresses */
 	for (i = 0; i < n; i++)
-		vf_data->vf_mc_hashes[i] = hash_list[i];;
+		vf_data->vf_mc_hashes[i] = hash_list[i];
 
 	/* Flush and reset the mta with the new values */
 	igb_set_rx_mode(adapter->netdev);

drivers/net/ll_temac_main.c

@@ -865,7 +865,7 @@ temac_of_probe(struct of_device *op, const struct of_device_id *match)
 	dcrs = dcr_resource_start(np, 0);
 	if (dcrs == 0) {
 		dev_err(&op->dev, "could not get DMA register address\n");
-		goto nodev;;
+		goto nodev;
 	}
 	lp->sdma_dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0));
 	dev_dbg(&op->dev, "DCR base: %x\n", dcrs);

drivers/net/macb.c

@@ -241,7 +241,7 @@ static int macb_mii_init(struct macb *bp)
 	struct eth_platform_data *pdata;
 	int err = -ENXIO, i;
 
-	/* Enable managment port */
+	/* Enable management port */
 	macb_writel(bp, NCR, MACB_BIT(MPE));
 
 	bp->mii_bus = mdiobus_alloc();

drivers/net/ni52.c

@@ -615,10 +615,10 @@ static int init586(struct net_device *dev)
 	/* addr_len |!src_insert |pre-len |loopback */
 	writeb(0x2e, &cfg_cmd->adr_len);
 	writeb(0x00, &cfg_cmd->priority);
-	writeb(0x60, &cfg_cmd->ifs);;
+	writeb(0x60, &cfg_cmd->ifs);
 	writeb(0x00, &cfg_cmd->time_low);
 	writeb(0xf2, &cfg_cmd->time_high);
-	writeb(0x00, &cfg_cmd->promisc);;
+	writeb(0x00, &cfg_cmd->promisc);
 	if (dev->flags & IFF_ALLMULTI) {
 		int len = ((char __iomem *)p->iscp - (char __iomem *)ptr - 8) / 6;
 		if (num_addrs > len) {

drivers/net/qlge/qlge_main.c

@@ -2630,7 +2630,7 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	    FLAGS_LI;		/* Load irq delay values */
 	if (rx_ring->lbq_len) {
 		cqicb->flags |= FLAGS_LL;	/* Load lbq values */
-		tmp = (u64)rx_ring->lbq_base_dma;;
+		tmp = (u64)rx_ring->lbq_base_dma;
 		base_indirect_ptr = (__le64 *) rx_ring->lbq_base_indirect;
 		page_entries = 0;
 		do {
@@ -2654,7 +2654,7 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	}
 	if (rx_ring->sbq_len) {
 		cqicb->flags |= FLAGS_LS;	/* Load sbq values */
-		tmp = (u64)rx_ring->sbq_base_dma;;
+		tmp = (u64)rx_ring->sbq_base_dma;
 		base_indirect_ptr = (__le64 *) rx_ring->sbq_base_indirect;
 		page_entries = 0;
 		do {

drivers/net/rionet.c

@@ -72,7 +72,7 @@ static int rionet_check = 0;
 static int rionet_capable = 1;
 
 /*
- * This is a fast lookup table for for translating TX
+ * This is a fast lookup table for translating TX
  * Ethernet packets into a destination RIO device. It
  * could be made into a hash table to save memory depending
  * on system trade-offs.

drivers/net/skfp/pcmplc.c

@@ -960,7 +960,7 @@ static void pcm_fsm(struct s_smc *smc, struct s_phy *phy, int cmd)
 			/*PC88b*/
 			if (!phy->cf_join) {
 				phy->cf_join = TRUE ;
-				queue_event(smc,EVENT_CFM,CF_JOIN+np) ; ;
+				queue_event(smc,EVENT_CFM,CF_JOIN+np) ;
 			}
 			if (cmd == PC_JOIN)
 				GO_STATE(PC8_ACTIVE) ;

drivers/net/skfp/pmf.c

@@ -807,9 +807,9 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
 				mib_p->fddiPORTLerFlag ;
 			sp->p4050_pad = 0 ;
 			sp->p4050_cutoff =
-				mib_p->fddiPORTLer_Cutoff ; ;
+				mib_p->fddiPORTLer_Cutoff ;
 			sp->p4050_alarm =
-				mib_p->fddiPORTLer_Alarm ; ;
+				mib_p->fddiPORTLer_Alarm ;
 			sp->p4050_estimate =
 				mib_p->fddiPORTLer_Estimate ;
 			sp->p4050_reject_ct =
@@ -829,7 +829,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
 			sp->p4051_porttype =
 				mib_p->fddiPORTMy_Type ;
 			sp->p4051_connectstate =
-				mib_p->fddiPORTConnectState ; ;
+				mib_p->fddiPORTConnectState ;
 			sp->p4051_pc_neighbor =
 				mib_p->fddiPORTNeighborType ;
 			sp->p4051_pc_withhold =
@@ -853,7 +853,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
 			struct smt_p_4053	*sp ;
 			sp = (struct smt_p_4053 *) to ;
 			sp->p4053_multiple =
-				mib_p->fddiPORTMultiple_P ; ;
+				mib_p->fddiPORTMultiple_P ;
 			sp->p4053_availablepaths =
 				mib_p->fddiPORTAvailablePaths ;
 			sp->p4053_currentpath =

drivers/net/skge.c

@@ -215,7 +215,7 @@ static void skge_wol_init(struct skge_port *skge)
 	if (skge->wol & WAKE_MAGIC)
 		ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
 	else
-		ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+		ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
 
 	ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
 	skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);

drivers/net/sky2.c

@@ -765,7 +765,7 @@ static void sky2_wol_init(struct sky2_port *sky2)
 	if (sky2->wol & WAKE_MAGIC)
 		ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
 	else
-		ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+		ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;
 
 	ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
 	sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);

drivers/net/vxge/vxge-config.h

@@ -1541,7 +1541,7 @@ void vxge_hw_ring_rxd_1b_info_get(
 	rxd_info->l4_cksum_valid =
 		(u32)VXGE_HW_RING_RXD_L4_CKSUM_CORRECT_GET(rxdp->control_0);
 	rxd_info->l4_cksum =
-		(u32)VXGE_HW_RING_RXD_L4_CKSUM_GET(rxdp->control_0);;
+		(u32)VXGE_HW_RING_RXD_L4_CKSUM_GET(rxdp->control_0);
 	rxd_info->frame =
 		(u32)VXGE_HW_RING_RXD_ETHER_ENCAP_GET(rxdp->control_0);
 	rxd_info->proto =

drivers/net/vxge/vxge-main.c

@@ -2350,7 +2350,7 @@ static int vxge_enable_msix(struct vxgedev *vdev)
 	enum vxge_hw_status status;
 	/* 0 - Tx, 1 - Rx  */
 	int tim_msix_id[4];
-	int alarm_msix_id = 0, msix_intr_vect = 0;;
+	int alarm_msix_id = 0, msix_intr_vect = 0;
 	vdev->intr_cnt = 0;
 
 	/* allocate msix vectors */

drivers/net/wireless/ath/ath5k/reg.h

@@ -982,7 +982,7 @@
 #define AR5K_5414_CBCFG_BUF_DIS	0x10	/* Disable buffer */
 
 /*
- * PCI-E Power managment configuration
+ * PCI-E Power management configuration
  * and status register [5424+]
  */
 #define	AR5K_PCIE_PM_CTL		0x4068			/* Register address */

drivers/net/wireless/atmel.c

@@ -3330,7 +3330,7 @@ static void atmel_smooth_qual(struct atmel_private *priv)
 	priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
 }
 
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
 static void atmel_management_frame(struct atmel_private *priv,
 				   struct ieee80211_hdr *header,
 				   u16 frame_len, u8 rssi)