From e9acf0298c664f825e6f1158f2a97341bf9e03ca Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Mon, 16 Nov 2020 22:10:58 +0800 Subject: [PATCH 1/7] i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc() Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot Signed-off-by: Zhihao Cheng Reviewed-by: Bjorn Andersson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index fbc04b60cfd1..5a47915869ae 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -801,7 +801,8 @@ static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup) if (ret || qup->bus_err || qup->qup_err) { reinit_completion(&qup->xfer); - if (qup_i2c_change_state(qup, QUP_RUN_STATE)) { + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) { dev_err(qup->dev, "change to run state timed out"); goto desc_err; } From 14718b3e129b058cb716a60c6faf40ef68661c54 Mon Sep 17 00:00:00 2001 From: Robert Foss Date: Mon, 30 Nov 2020 11:04:45 +0100 Subject: [PATCH 2/7] i2c: qcom: Fix IRQ error misassignement During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain Suggested-by: Loic Poulain Signed-off-by: Robert Foss Reviewed-by: Manivannan Sadhasivam Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-qcom-cci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index f13735beca58..1c259b5188de 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -194,9 +194,9 @@ static irqreturn_t cci_isr(int irq, void *dev) if (unlikely(val & CCI_IRQ_STATUS_0_I2C_M1_ERROR)) { if (val & CCI_IRQ_STATUS_0_I2C_M1_Q0_NACK_ERR || val & CCI_IRQ_STATUS_0_I2C_M1_Q1_NACK_ERR) - cci->master[0].status = -ENXIO; + cci->master[1].status = -ENXIO; else - cci->master[0].status = -EIO; + cci->master[1].status = -EIO; writel(CCI_HALT_REQ_I2C_M1_Q0Q1, cci->base + CCI_HALT_REQ); ret = IRQ_HANDLED; From 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Fri, 9 Oct 2020 13:03:18 +0200 Subject: [PATCH 3/7] i2c: imx: Fix reset of I2SR_IAL flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index c98529c76348..39e98d216016 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -412,6 +412,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx) dma->chan_using = NULL; } +static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits) +{ + unsigned int temp; + + /* + * i2sr_clr_opcode is the value to clear all interrupts. Here we want to + * clear only , so we write ~i2sr_clr_opcode with just + * toggled. This is required because i.MX needs W0C and Vybrid uses W1C. + */ + temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits; + imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); +} + static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic) { unsigned long orig_jiffies = jiffies; @@ -424,8 +437,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a /* check for arbitration lost */ if (temp & I2SR_IAL) { - temp &= ~I2SR_IAL; - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); return -EAGAIN; } @@ -469,7 +481,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic) */ readb_poll_timeout_atomic(addr, regval, regval & I2SR_IIF, 5, 1000 + 100); i2c_imx->i2csr = regval; - imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF | I2SR_IAL); } else { wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); } @@ -623,9 +635,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id) if (temp & I2SR_IIF) { /* save status register */ i2c_imx->i2csr = temp; - temp &= ~I2SR_IIF; - temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF); - imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR); + i2c_imx_clear_irq(i2c_imx, I2SR_IIF); wake_up(&i2c_imx->queue); return IRQ_HANDLED; } From 1de67a3dee7a279ebe4d892b359fe3696938ec15 Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Fri, 9 Oct 2020 13:03:19 +0200 Subject: [PATCH 4/7] i2c: imx: Check for I2SR_IAL after every byte Arbitration Lost (IAL) can happen after every single byte transfer. If arbitration is lost, the I2C hardware will autonomously switch from master mode to slave. If a transfer is not aborted in this state, consecutive transfers will not be executed by the hardware and will timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 39e98d216016..a2abae124342 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -490,6 +490,16 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic) dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__); return -ETIMEDOUT; } + + /* check for arbitration lost */ + if (i2c_imx->i2csr & I2SR_IAL) { + dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__); + i2c_imx_clear_irq(i2c_imx, I2SR_IAL); + + i2c_imx->i2csr = 0; + return -EAGAIN; + } + dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__); i2c_imx->i2csr = 0; return 0; From 61e6fe59ede155881a622f5901551b1cc8748f6a Mon Sep 17 00:00:00 2001 From: Christian Eggers Date: Fri, 9 Oct 2020 13:03:20 +0200 Subject: [PATCH 5/7] i2c: imx: Don't generate STOP condition if arbitration has been lost If arbitration is lost, the master automatically changes to slave mode. I2SR_IBB may or may not be reset by hardware. Raising a STOP condition by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB. So calling i2c_imx_bus_busy() is not required and would busy-wait until timeout. Signed-off-by: Christian Eggers Tested (not extensively) on Vybrid VF500 (Toradex VF50): Tested-by: Krzysztof Kozlowski Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove # the 3rd argument from the calls to # i2c_imx_bus_busy(). Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index a2abae124342..e6f8d6e45a15 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -615,6 +615,8 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic) /* Stop I2C transaction */ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); if (i2c_imx->dma) temp &= ~I2CR_DMAEN; @@ -778,9 +780,12 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, */ dev_dbg(dev, "<%s> clear MSTA\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0, false); + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0, false); } else { /* * For i2c master receiver repeat restart operation like: @@ -905,9 +910,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR); + if (!(temp & I2CR_MSTA)) + i2c_imx->stopped = 1; temp &= ~(I2CR_MSTA | I2CR_MTX); imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); - i2c_imx_bus_busy(i2c_imx, 0, atomic); + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0, atomic); } else { /* * For i2c master receiver repeat restart operation like: From c62dac0a35bb6d351cd568e97090c5fd3e7aa532 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 3 Dec 2020 23:32:50 +0100 Subject: [PATCH 6/7] i2c: mlxbf: select CONFIG_I2C_SLAVE If this is not enabled, the interfaces used in this driver do not work: drivers/i2c/busses/i2c-mlxbf.c:1888:3: error: implicit declaration of function 'i2c_slave_event' [-Werror,-Wimplicit-function-declaration] i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1888:26: error: use of undeclared identifier 'I2C_SLAVE_WRITE_REQUESTED' i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); ^ drivers/i2c/busses/i2c-mlxbf.c:1890:32: error: use of undeclared identifier 'I2C_SLAVE_WRITE_RECEIVED' ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, ^ drivers/i2c/busses/i2c-mlxbf.c:1892:26: error: use of undeclared identifier 'I2C_SLAVE_STOP' i2c_slave_event(slave, I2C_SLAVE_STOP, &value); ^ Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Arnd Bergmann Acked-by: Khalil Blaiech Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a97a9d058198..a49e0ed4a599 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -734,6 +734,7 @@ config I2C_LPC2K config I2C_MLXBF tristate "Mellanox BlueField I2C controller" depends on MELLANOX_PLATFORM && ARM64 + select I2C_SLAVE help Enabling this option will add I2C SMBus support for Mellanox BlueField system. From 2bf9545626f8d09f552ab86d0047a415fe9a07a0 Mon Sep 17 00:00:00 2001 From: Wang Xiaojun Date: Wed, 2 Dec 2020 20:46:47 -0500 Subject: [PATCH 7/7] i2c: mlxbf: Fix the return check of devm_ioremap and ioremap devm_ioremap and ioremap may return NULL which cannot be checked by IS_ERR. Signed-off-by: Wang Xiaojun Reported-by: Hulk Robot Acked-by: Khalil Blaiech Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mlxbf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c index 33574d40ea9c..2fb0532d8a16 100644 --- a/drivers/i2c/busses/i2c-mlxbf.c +++ b/drivers/i2c/busses/i2c-mlxbf.c @@ -1258,9 +1258,9 @@ static int mlxbf_i2c_get_gpio(struct platform_device *pdev, return -EFAULT; gpio_res->io = devm_ioremap(dev, params->start, size); - if (IS_ERR(gpio_res->io)) { + if (!gpio_res->io) { devm_release_mem_region(dev, params->start, size); - return PTR_ERR(gpio_res->io); + return -ENOMEM; } return 0; @@ -1323,9 +1323,9 @@ static int mlxbf_i2c_get_corepll(struct platform_device *pdev, return -EFAULT; corepll_res->io = devm_ioremap(dev, params->start, size); - if (IS_ERR(corepll_res->io)) { + if (!corepll_res->io) { devm_release_mem_region(dev, params->start, size); - return PTR_ERR(corepll_res->io); + return -ENOMEM; } return 0; @@ -1717,9 +1717,9 @@ static int mlxbf_i2c_init_coalesce(struct platform_device *pdev, return -EFAULT; coalesce_res->io = ioremap(params->start, size); - if (IS_ERR(coalesce_res->io)) { + if (!coalesce_res->io) { release_mem_region(params->start, size); - return PTR_ERR(coalesce_res->io); + return -ENOMEM; } priv->coalesce = coalesce_res;