V4L/DVB (5184): Add cx23415 decoder register documentation
Many thanks to Ian Armstrong for figuring out what all these registers do. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Ian Armstrong
Mauro Carvalho Chehab
parent
faeb4ab38f
commit
32ec5332f9
|
|
@ -0,0 +1,815 @@
|
|||
PVR350 Video decoder registers 0x02002800 -> 0x02002B00
|
||||
=======================================================
|
||||
|
||||
This list has been worked out through trial and error. There will be mistakes
|
||||
and omissions. Some registers have no obvious effect so it's hard to say what
|
||||
they do, while others interact with each other, or require a certain load
|
||||
sequence. Horizontal filter setup is one example, with six registers working
|
||||
in unison and requiring a certain load sequence to correctly configure. The
|
||||
indexed colour palette is much easier to set at just two registers, but again
|
||||
it requires a certain load sequence.
|
||||
|
||||
Some registers are fussy about what they are set to. Load in a bad value & the
|
||||
decoder will fail. A firmware reload will often recover, but sometimes a reset
|
||||
is required. For registers containing size information, setting them to 0 is
|
||||
generally a bad idea. For other control registers i.e. 2878, you'll only find
|
||||
out what values are bad when it hangs.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2800
|
||||
bit 0
|
||||
Decoder enable
|
||||
0 = disable
|
||||
1 = enable
|
||||
--------------------------------------------------------------------------------
|
||||
2804
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias register 1
|
||||
---------------
|
||||
2808
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias register 2
|
||||
---------------
|
||||
280C
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias register 3
|
||||
---------------
|
||||
2810
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias register 4
|
||||
---------------
|
||||
2814
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias register 5
|
||||
---------------
|
||||
2818
|
||||
bits 0:31
|
||||
Decoder horizontal Y alias trigger
|
||||
|
||||
These six registers control the horizontal aliasing filter for the Y plane.
|
||||
The first five registers must all be loaded before accessing the trigger
|
||||
(2818), as this register actually clocks the data through for the first
|
||||
five.
|
||||
|
||||
To correctly program set the filter, this whole procedure must be done 16
|
||||
times. The actual register contents are copied from a lookup-table in the
|
||||
firmware which contains 4 different filter settings.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
281C
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias register 1
|
||||
---------------
|
||||
2820
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias register 2
|
||||
---------------
|
||||
2824
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias register 3
|
||||
---------------
|
||||
2828
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias register 4
|
||||
---------------
|
||||
282C
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias register 5
|
||||
---------------
|
||||
2830
|
||||
bits 0:31
|
||||
Decoder horizontal UV alias trigger
|
||||
|
||||
These six registers control the horizontal aliasing for the UV plane.
|
||||
Operation is the same as the Y filter, with 2830 being the trigger
|
||||
register.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2834
|
||||
bits 0:15
|
||||
Decoder Y source width in pixels
|
||||
|
||||
bits 16:31
|
||||
Decoder Y destination width in pixels
|
||||
---------------
|
||||
2838
|
||||
bits 0:15
|
||||
Decoder UV source width in pixels
|
||||
|
||||
bits 16:31
|
||||
Decoder UV destination width in pixels
|
||||
|
||||
NOTE: For both registers, the resulting image must be fully visible on
|
||||
screen. If the image exceeds the right edge both the source and destination
|
||||
size must be adjusted to reflect the visible portion. For the source width,
|
||||
you must take into account the scaling when calculating the new value.
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
283C
|
||||
bits 0:31
|
||||
Decoder Y horizontal scaling
|
||||
Normally = Reg 2854 >> 2
|
||||
---------------
|
||||
2840
|
||||
bits 0:31
|
||||
Decoder ?? unknown - horizontal scaling
|
||||
Usually 0x00080514
|
||||
---------------
|
||||
2844
|
||||
bits 0:31
|
||||
Decoder UV horizontal scaling
|
||||
Normally = Reg 2854 >> 2
|
||||
---------------
|
||||
2848
|
||||
bits 0:31
|
||||
Decoder ?? unknown - horizontal scaling
|
||||
Usually 0x00100514
|
||||
---------------
|
||||
284C
|
||||
bits 0:31
|
||||
Decoder ?? unknown - Y plane
|
||||
Usually 0x00200020
|
||||
---------------
|
||||
2850
|
||||
bits 0:31
|
||||
Decoder ?? unknown - UV plane
|
||||
Usually 0x00200020
|
||||
---------------
|
||||
2854
|
||||
bits 0:31
|
||||
Decoder 'master' value for horizontal scaling
|
||||
---------------
|
||||
2858
|
||||
bits 0:31
|
||||
Decoder ?? unknown
|
||||
Usually 0
|
||||
---------------
|
||||
285C
|
||||
bits 0:31
|
||||
Decoder ?? unknown
|
||||
Normally = Reg 2854 >> 1
|
||||
---------------
|
||||
2860
|
||||
bits 0:31
|
||||
Decoder ?? unknown
|
||||
Usually 0
|
||||
---------------
|
||||
2864
|
||||
bits 0:31
|
||||
Decoder ?? unknown
|
||||
Normally = Reg 2854 >> 1
|
||||
---------------
|
||||
2868
|
||||
bits 0:31
|
||||
Decoder ?? unknown
|
||||
Usually 0
|
||||
|
||||
Most of these registers either control horizontal scaling, or appear linked
|
||||
to it in some way. Register 2854 contains the 'master' value & the other
|
||||
registers can be calculated from that one. You must also remember to
|
||||
correctly set the divider in Reg 2874.
|
||||
|
||||
To enlarge:
|
||||
Reg 2854 = (source_width * 0x00200000) / destination_width
|
||||
Reg 2874 = No divide
|
||||
|
||||
To reduce from full size down to half size:
|
||||
Reg 2854 = (source_width/2 * 0x00200000) / destination width
|
||||
Reg 2874 = Divide by 2
|
||||
|
||||
To reduce from half size down to quarter size:
|
||||
Reg 2854 = (source_width/4 * 0x00200000) / destination width
|
||||
Reg 2874 = Divide by 4
|
||||
|
||||
The result is always rounded up.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
286C
|
||||
bits 0:15
|
||||
Decoder horizontal Y buffer offset
|
||||
|
||||
bits 15:31
|
||||
Decoder horizontal UV buffer offset
|
||||
|
||||
Offset into the video image buffer. If the offset is gradually incremented,
|
||||
the on screen image will move left & wrap around higher up on the right.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2870
|
||||
bits 0:15
|
||||
Decoder horizontal Y output offset
|
||||
|
||||
bits 16:31
|
||||
Decoder horizontal UV output offset
|
||||
|
||||
Offsets the actual video output. Controls output alignment of the Y & UV
|
||||
planes. The higher the value, the greater the shift to the left. Use
|
||||
reg 2890 to move the image right.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2874
|
||||
bits 0:1
|
||||
Decoder horizontal Y output size divider
|
||||
00 = No divide
|
||||
01 = Divide by 2
|
||||
10 = Divide by 3
|
||||
|
||||
bits 4:5
|
||||
Decoder horizontal UV output size divider
|
||||
00 = No divide
|
||||
01 = Divide by 2
|
||||
10 = Divide by 3
|
||||
|
||||
bit 8
|
||||
Decoder ?? unknown
|
||||
0 = Normal
|
||||
1 = Affects video output levels
|
||||
|
||||
bit 16
|
||||
Decoder ?? unknown
|
||||
0 = Normal
|
||||
1 = Disable horizontal filter
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2878
|
||||
bit 0
|
||||
?? unknown
|
||||
|
||||
bit 1
|
||||
osd on/off
|
||||
0 = osd off
|
||||
1 = osd on
|
||||
|
||||
bit 2
|
||||
Decoder + osd video timing
|
||||
0 = NTSC
|
||||
1 = PAL
|
||||
|
||||
bits 3:4
|
||||
?? unknown
|
||||
|
||||
bit 5
|
||||
Decoder + osd
|
||||
Swaps upper & lower fields
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
287C
|
||||
bits 0:10
|
||||
Decoder & osd ?? unknown
|
||||
Moves entire screen horizontally. Starts at 0x005 with the screen
|
||||
shifted heavily to the right. Incrementing in steps of 0x004 will
|
||||
gradually shift the screen to the left.
|
||||
|
||||
bits 11:31
|
||||
?? unknown
|
||||
|
||||
Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL)
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2880 -------- ?? unknown
|
||||
2884 -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
2888
|
||||
bit 0
|
||||
Decoder + osd ?? unknown
|
||||
0 = Normal
|
||||
1 = Misaligned fields (Correctable through 289C & 28A4)
|
||||
|
||||
bit 4
|
||||
?? unknown
|
||||
|
||||
bit 8
|
||||
?? unknown
|
||||
|
||||
Warning: Bad values will require a firmware reload to recover.
|
||||
Known to be bad are 0x000,0x011,0x100,0x111
|
||||
--------------------------------------------------------------------------------
|
||||
288C
|
||||
bits 0:15
|
||||
osd ?? unknown
|
||||
Appears to affect the osd position stability. The higher the value the
|
||||
more unstable it becomes. Decoder output remains stable.
|
||||
|
||||
bits 16:31
|
||||
osd ?? unknown
|
||||
Same as bits 0:15
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2890
|
||||
bits 0:11
|
||||
Decoder output horizontal offset.
|
||||
|
||||
Horizontal offset moves the video image right. A small left shift is
|
||||
possible, but it's better to use reg 2870 for that due to its greater
|
||||
range.
|
||||
|
||||
NOTE: Video corruption will occur if video window is shifted off the right
|
||||
edge. To avoid this read the notes for 2834 & 2838.
|
||||
--------------------------------------------------------------------------------
|
||||
2894
|
||||
bits 0:23
|
||||
Decoder output video surround colour.
|
||||
|
||||
Contains the colour (in yuv) used to fill the screen when the video is
|
||||
running in a window.
|
||||
--------------------------------------------------------------------------------
|
||||
2898
|
||||
bits 0:23
|
||||
Decoder video window colour
|
||||
Contains the colour (in yuv) used to fill the video window when the
|
||||
video is turned off.
|
||||
|
||||
bit 24
|
||||
Decoder video output
|
||||
0 = Video on
|
||||
1 = Video off
|
||||
|
||||
bit 28
|
||||
Decoder plane order
|
||||
0 = Y,UV
|
||||
1 = UV,Y
|
||||
|
||||
bit 29
|
||||
Decoder second plane byte order
|
||||
0 = Normal (UV)
|
||||
1 = Swapped (VU)
|
||||
|
||||
In normal usage, the first plane is Y & the second plane is UV. Though the
|
||||
order of the planes can be swapped, only the byte order of the second plane
|
||||
can be swapped. This isn't much use for the Y plane, but can be useful for
|
||||
the UV plane.
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
289C
|
||||
bits 0:15
|
||||
Decoder vertical field offset 1
|
||||
|
||||
bits 16:31
|
||||
Decoder vertical field offset 2
|
||||
|
||||
Controls field output vertical alignment. The higher the number, the lower
|
||||
the image on screen. Known starting values are 0x011E0017 (NTSC) &
|
||||
0x01500017 (PAL)
|
||||
--------------------------------------------------------------------------------
|
||||
28A0
|
||||
bits 0:15
|
||||
Decoder & osd width in pixels
|
||||
|
||||
bits 16:31
|
||||
Decoder & osd height in pixels
|
||||
|
||||
All output from the decoder & osd are disabled beyond this area. Decoder
|
||||
output will simply go black outside of this region. If the osd tries to
|
||||
exceed this area it will become corrupt.
|
||||
--------------------------------------------------------------------------------
|
||||
28A4
|
||||
bits 0:11
|
||||
osd left shift.
|
||||
|
||||
Has a range of 0x770->0x7FF. With the exception of 0, any value outside of
|
||||
this range corrupts the osd.
|
||||
--------------------------------------------------------------------------------
|
||||
28A8
|
||||
bits 0:15
|
||||
osd vertical field offset 1
|
||||
|
||||
bits 16:31
|
||||
osd vertical field offset 2
|
||||
|
||||
Controls field output vertical alignment. The higher the number, the lower
|
||||
the image on screen. Known starting values are 0x011E0017 (NTSC) &
|
||||
0x01500017 (PAL)
|
||||
--------------------------------------------------------------------------------
|
||||
28AC -------- ?? unknown
|
||||
|
|
||||
V
|
||||
28BC -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
28C0
|
||||
bit 0
|
||||
Current output field
|
||||
0 = first field
|
||||
1 = second field
|
||||
|
||||
bits 16:31
|
||||
Current scanline
|
||||
The scanline counts from the top line of the first field
|
||||
through to the last line of the second field.
|
||||
--------------------------------------------------------------------------------
|
||||
28C4 -------- ?? unknown
|
||||
|
|
||||
V
|
||||
28F8 -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
28FC
|
||||
bit 0
|
||||
?? unknown
|
||||
0 = Normal
|
||||
1 = Breaks decoder & osd output
|
||||
--------------------------------------------------------------------------------
|
||||
2900
|
||||
bits 0:31
|
||||
Decoder vertical Y alias register 1
|
||||
---------------
|
||||
2904
|
||||
bits 0:31
|
||||
Decoder vertical Y alias register 2
|
||||
---------------
|
||||
2908
|
||||
bits 0:31
|
||||
Decoder vertical Y alias trigger
|
||||
|
||||
These three registers control the vertical aliasing filter for the Y plane.
|
||||
Operation is similar to the horizontal Y filter (2804). The only real
|
||||
difference is that there are only two registers to set before accessing
|
||||
the trigger register (2908). As for the horizontal filter, the values are
|
||||
taken from a lookup table in the firmware, and the procedure must be
|
||||
repeated 16 times to fully program the filter.
|
||||
--------------------------------------------------------------------------------
|
||||
290C
|
||||
bits 0:31
|
||||
Decoder vertical UV alias register 1
|
||||
---------------
|
||||
2910
|
||||
bits 0:31
|
||||
Decoder vertical UV alias register 2
|
||||
---------------
|
||||
2914
|
||||
bits 0:31
|
||||
Decoder vertical UV alias trigger
|
||||
|
||||
These three registers control the vertical aliasing filter for the UV
|
||||
plane. Operation is the same as the Y filter, with 2914 being the trigger.
|
||||
--------------------------------------------------------------------------------
|
||||
2918
|
||||
bits 0:15
|
||||
Decoder Y source height in pixels
|
||||
|
||||
bits 16:31
|
||||
Decoder Y destination height in pixels
|
||||
---------------
|
||||
291C
|
||||
bits 0:15
|
||||
Decoder UV source height in pixels divided by 2
|
||||
|
||||
bits 16:31
|
||||
Decoder UV destination height in pixels
|
||||
|
||||
NOTE: For both registers, the resulting image must be fully visible on
|
||||
screen. If the image exceeds the bottom edge both the source and
|
||||
destination size must be adjusted to reflect the visible portion. For the
|
||||
source height, you must take into account the scaling when calculating the
|
||||
new value.
|
||||
--------------------------------------------------------------------------------
|
||||
2920
|
||||
bits 0:31
|
||||
Decoder Y vertical scaling
|
||||
Normally = Reg 2930 >> 2
|
||||
---------------
|
||||
2924
|
||||
bits 0:31
|
||||
Decoder Y vertical scaling
|
||||
Normally = Reg 2920 + 0x514
|
||||
---------------
|
||||
2928
|
||||
bits 0:31
|
||||
Decoder UV vertical scaling
|
||||
When enlarging = Reg 2930 >> 2
|
||||
When reducing = Reg 2930 >> 3
|
||||
---------------
|
||||
292C
|
||||
bits 0:31
|
||||
Decoder UV vertical scaling
|
||||
Normally = Reg 2928 + 0x514
|
||||
---------------
|
||||
2930
|
||||
bits 0:31
|
||||
Decoder 'master' value for vertical scaling
|
||||
---------------
|
||||
2934
|
||||
bits 0:31
|
||||
Decoder ?? unknown - Y vertical scaling
|
||||
---------------
|
||||
2938
|
||||
bits 0:31
|
||||
Decoder Y vertical scaling
|
||||
Normally = Reg 2930
|
||||
---------------
|
||||
293C
|
||||
bits 0:31
|
||||
Decoder ?? unknown - Y vertical scaling
|
||||
---------------
|
||||
2940
|
||||
bits 0:31
|
||||
Decoder UV vertical scaling
|
||||
When enlarging = Reg 2930 >> 1
|
||||
When reducing = Reg 2930
|
||||
---------------
|
||||
2944
|
||||
bits 0:31
|
||||
Decoder ?? unknown - UV vertical scaling
|
||||
---------------
|
||||
2948
|
||||
bits 0:31
|
||||
Decoder UV vertical scaling
|
||||
Normally = Reg 2940
|
||||
---------------
|
||||
294C
|
||||
bits 0:31
|
||||
Decoder ?? unknown - UV vertical scaling
|
||||
|
||||
Most of these registers either control vertical scaling, or appear linked
|
||||
to it in some way. Register 2930 contains the 'master' value & all other
|
||||
registers can be calculated from that one. You must also remember to
|
||||
correctly set the divider in Reg 296C
|
||||
|
||||
To enlarge:
|
||||
Reg 2930 = (source_height * 0x00200000) / destination_height
|
||||
Reg 296C = No divide
|
||||
|
||||
To reduce from full size down to half size:
|
||||
Reg 2930 = (source_height/2 * 0x00200000) / destination height
|
||||
Reg 296C = Divide by 2
|
||||
|
||||
To reduce from half down to quarter.
|
||||
Reg 2930 = (source_height/4 * 0x00200000) / destination height
|
||||
Reg 296C = Divide by 4
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2950
|
||||
bits 0:15
|
||||
Decoder Y line index into display buffer, first field
|
||||
|
||||
bits 16:31
|
||||
Decoder Y vertical line skip, first field
|
||||
--------------------------------------------------------------------------------
|
||||
2954
|
||||
bits 0:15
|
||||
Decoder Y line index into display buffer, second field
|
||||
|
||||
bits 16:31
|
||||
Decoder Y vertical line skip, second field
|
||||
--------------------------------------------------------------------------------
|
||||
2958
|
||||
bits 0:15
|
||||
Decoder UV line index into display buffer, first field
|
||||
|
||||
bits 16:31
|
||||
Decoder UV vertical line skip, first field
|
||||
--------------------------------------------------------------------------------
|
||||
295C
|
||||
bits 0:15
|
||||
Decoder UV line index into display buffer, second field
|
||||
|
||||
bits 16:31
|
||||
Decoder UV vertical line skip, second field
|
||||
--------------------------------------------------------------------------------
|
||||
2960
|
||||
bits 0:15
|
||||
Decoder destination height minus 1
|
||||
|
||||
bits 16:31
|
||||
Decoder destination height divided by 2
|
||||
--------------------------------------------------------------------------------
|
||||
2964
|
||||
bits 0:15
|
||||
Decoder Y vertical offset, second field
|
||||
|
||||
bits 16:31
|
||||
Decoder Y vertical offset, first field
|
||||
|
||||
These two registers shift the Y plane up. The higher the number, the
|
||||
greater the shift.
|
||||
--------------------------------------------------------------------------------
|
||||
2968
|
||||
bits 0:15
|
||||
Decoder UV vertical offset, second field
|
||||
|
||||
bits 16:31
|
||||
Decoder UV vertical offset, first field
|
||||
|
||||
These two registers shift the UV plane up. The higher the number, the
|
||||
greater the shift.
|
||||
--------------------------------------------------------------------------------
|
||||
296C
|
||||
bits 0:1
|
||||
Decoder vertical Y output size divider
|
||||
00 = No divide
|
||||
01 = Divide by 2
|
||||
10 = Divide by 4
|
||||
|
||||
bits 8:9
|
||||
Decoder vertical UV output size divider
|
||||
00 = No divide
|
||||
01 = Divide by 2
|
||||
10 = Divide by 4
|
||||
--------------------------------------------------------------------------------
|
||||
2970
|
||||
bit 0
|
||||
Decoder ?? unknown
|
||||
0 = Normal
|
||||
1 = Affect video output levels
|
||||
|
||||
bit 16
|
||||
Decoder ?? unknown
|
||||
0 = Normal
|
||||
1 = Disable vertical filter
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
2974 -------- ?? unknown
|
||||
|
|
||||
V
|
||||
29EF -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
2A00
|
||||
bits 0:2
|
||||
osd colour mode
|
||||
001 = 16 bit (565)
|
||||
010 = 15 bit (555)
|
||||
011 = 12 bit (444)
|
||||
100 = 32 bit (8888)
|
||||
101 = 8 bit indexed
|
||||
|
||||
bits 4:5
|
||||
osd display bpp
|
||||
01 = 8 bit
|
||||
10 = 16 bit
|
||||
11 = 32 bit
|
||||
|
||||
bit 8
|
||||
osd global alpha
|
||||
0 = Off
|
||||
1 = On
|
||||
|
||||
bit 9
|
||||
osd local alpha
|
||||
0 = Off
|
||||
1 = On
|
||||
|
||||
bit 10
|
||||
osd colour key
|
||||
0 = Off
|
||||
1 = On
|
||||
|
||||
bit 11
|
||||
osd ?? unknown
|
||||
Must be 1
|
||||
|
||||
bit 13
|
||||
osd colour space
|
||||
0 = ARGB
|
||||
1 = AYVU
|
||||
|
||||
bits 16:31
|
||||
osd ?? unknown
|
||||
Must be 0x001B (some kind of buffer pointer ?)
|
||||
|
||||
When the bits-per-pixel is set to 8, the colour mode is ignored and
|
||||
assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth
|
||||
is honoured, and when using a colour depth that requires fewer bytes than
|
||||
allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit
|
||||
index colour, there are 3 padding bytes per pixel. It's also possible to
|
||||
select 16bpp with a 32 bit colour mode. This results in the pixel width
|
||||
being doubled, but the color key will not work as expected in this mode.
|
||||
|
||||
Colour key is as it suggests. You designate a colour which will become
|
||||
completely transparent. When using 565, 555 or 444 colour modes, the
|
||||
colour key is always 16 bits wide. The colour to key on is set in Reg 2A18.
|
||||
|
||||
Local alpha is a per-pixel 256 step transparency, with 0 being transparent
|
||||
and 255 being solid. This is only available in 32 bit & 8 bit indexed
|
||||
colour modes.
|
||||
|
||||
Global alpha is a 256 step transparency that applies to the entire osd,
|
||||
with 0 being transparent & 255 being solid.
|
||||
|
||||
It's possible to combine colour key, local alpha & global alpha.
|
||||
--------------------------------------------------------------------------------
|
||||
2A04
|
||||
bits 0:15
|
||||
osd x coord for left edge
|
||||
|
||||
bits 16:31
|
||||
osd y coord for top edge
|
||||
---------------
|
||||
2A08
|
||||
bits 0:15
|
||||
osd x coord for right edge
|
||||
|
||||
bits 16:31
|
||||
osd y coord for bottom edge
|
||||
|
||||
For both registers, (0,0) = top left corner of the display area. These
|
||||
registers do not control the osd size, only where it's positioned & how
|
||||
much is visible. The visible osd area cannot exceed the right edge of the
|
||||
display, otherwise the osd will become corrupt. See reg 2A10 for
|
||||
setting osd width.
|
||||
--------------------------------------------------------------------------------
|
||||
2A0C
|
||||
bits 0:31
|
||||
osd buffer index
|
||||
|
||||
An index into the osd buffer. Slowly incrementing this moves the osd left,
|
||||
wrapping around onto the right edge
|
||||
--------------------------------------------------------------------------------
|
||||
2A10
|
||||
bits 0:11
|
||||
osd buffer 32 bit word width
|
||||
|
||||
Contains the width of the osd measured in 32 bit words. This means that all
|
||||
colour modes are restricted to a byte width which is divisible by 4.
|
||||
--------------------------------------------------------------------------------
|
||||
2A14
|
||||
bits 0:15
|
||||
osd height in pixels
|
||||
|
||||
bits 16:32
|
||||
osd line index into buffer
|
||||
osd will start displaying from this line.
|
||||
--------------------------------------------------------------------------------
|
||||
2A18
|
||||
bits 0:31
|
||||
osd colour key
|
||||
|
||||
Contains the colour value which will be transparent.
|
||||
--------------------------------------------------------------------------------
|
||||
2A1C
|
||||
bits 0:7
|
||||
osd global alpha
|
||||
|
||||
Contains the global alpha value (equiv ivtvfbctl --alpha XX)
|
||||
--------------------------------------------------------------------------------
|
||||
2A20 -------- ?? unknown
|
||||
|
|
||||
V
|
||||
2A2C -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
2A30
|
||||
bits 0:7
|
||||
osd colour to change in indexed palette
|
||||
---------------
|
||||
2A34
|
||||
bits 0:31
|
||||
osd colour for indexed palette
|
||||
|
||||
To set the new palette, first load the index of the colour to change into
|
||||
2A30, then load the new colour into 2A34. The full palette is 256 colours,
|
||||
so the index range is 0x00-0xFF
|
||||
--------------------------------------------------------------------------------
|
||||
2A38 -------- ?? unknown
|
||||
2A3C -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
2A40
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Affects overall brightness, wrapping around to black
|
||||
--------------------------------------------------------------------------------
|
||||
2A44
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Green tint
|
||||
--------------------------------------------------------------------------------
|
||||
2A48
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Red tint
|
||||
--------------------------------------------------------------------------------
|
||||
2A4C
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Affects overall brightness, wrapping around to black
|
||||
--------------------------------------------------------------------------------
|
||||
2A50
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Colour shift
|
||||
--------------------------------------------------------------------------------
|
||||
2A54
|
||||
bits 0:31
|
||||
osd ?? unknown
|
||||
|
||||
Colour shift
|
||||
--------------------------------------------------------------------------------
|
||||
2A58 -------- ?? unknown
|
||||
|
|
||||
V
|
||||
2AFC -------- ?? unknown
|
||||
--------------------------------------------------------------------------------
|
||||
2B00
|
||||
bit 0
|
||||
osd filter control
|
||||
0 = filter off
|
||||
1 = filter on
|
||||
|
||||
bits 1:4
|
||||
osd ?? unknown
|
||||
|
||||
--------------------------------------------------------------------------------
|
||||
|
||||
v0.3 - 2 February 2007 - Ian Armstrong (ian@iarmst.demon.co.uk)
|
||||
|
||||
Loading…
Reference in New Issue