UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

igb: reset sgmii phy at start of init 

Our SGMII phy code was incomplete in that it was not actually placing the
phy in SGMII mode and as a result the PHY was not able to establish a link
when connected to a non serdes link partner.  This patch updates the code
to combine the SGMII/serdes PCS init and to add the necessary reset.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Alexander Duyck 2009-09-14 08:22:54 +00:00 committed by David S. Miller
parent 6b1be1990d
commit 2fb02a26bd
4 changed files with 94 additions and 108 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

188
drivers/net/igb/e1000_82575.c
View File

@ -49,11 +49,10 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
static s32 igb_reset_hw_82575(struct e1000_hw *); static s32 igb_reset_hw_82575(struct e1000_hw *);
static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
static s32 igb_setup_copper_link_82575(struct e1000_hw *); static s32 igb_setup_copper_link_82575(struct e1000_hw *);
static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *); static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16); static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
static void igb_clear_hw_cntrs_82575(struct e1000_hw *); static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16); static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
static void igb_configure_pcs_link_82575(struct e1000_hw *);
static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *, static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
u16 *); u16 *);
static s32 igb_get_phy_id_82575(struct e1000_hw *); static s32 igb_get_phy_id_82575(struct e1000_hw *);
@ -105,16 +104,20 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
dev_spec->sgmii_active = false; dev_spec->sgmii_active = false;
ctrl_ext = rd32(E1000_CTRL_EXT); ctrl_ext = rd32(E1000_CTRL_EXT);
if ((ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) == switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES) { case E1000_CTRL_EXT_LINK_MODE_SGMII:
hw->phy.media_type = e1000_media_type_internal_serdes;
ctrl_ext |= E1000_CTRL_I2C_ENA;
} else if (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII) {
dev_spec->sgmii_active = true; dev_spec->sgmii_active = true;
ctrl_ext |= E1000_CTRL_I2C_ENA; ctrl_ext |= E1000_CTRL_I2C_ENA;
} else { break;
case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
hw->phy.media_type = e1000_media_type_internal_serdes;
ctrl_ext |= E1000_CTRL_I2C_ENA;
break;
default:
ctrl_ext &= ~E1000_CTRL_I2C_ENA; ctrl_ext &= ~E1000_CTRL_I2C_ENA;
break;
} }
wr32(E1000_CTRL_EXT, ctrl_ext); wr32(E1000_CTRL_EXT, ctrl_ext);
/* Set mta register count */ /* Set mta register count */
@ -134,7 +137,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
mac->ops.setup_physical_interface = mac->ops.setup_physical_interface =
(hw->phy.media_type == e1000_media_type_copper) (hw->phy.media_type == e1000_media_type_copper)
? igb_setup_copper_link_82575 ? igb_setup_copper_link_82575
: igb_setup_fiber_serdes_link_82575; : igb_setup_serdes_link_82575;
/* NVM initialization */ /* NVM initialization */
eecd = rd32(E1000_EECD); eecd = rd32(E1000_EECD);
@ -379,6 +382,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy; struct e1000_phy_info *phy = &hw->phy;
s32 ret_val = 0; s32 ret_val = 0;
u16 phy_id; u16 phy_id;
u32 ctrl_ext;
/* /*
* For SGMII PHYs, we try the list of possible addresses until * For SGMII PHYs, we try the list of possible addresses until
@ -393,6 +397,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
goto out; goto out;
} }
/* Power on sgmii phy if it is disabled */
ctrl_ext = rd32(E1000_CTRL_EXT);
wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
wrfl();
msleep(300);
/* /*
* The address field in the I2CCMD register is 3 bits and 0 is invalid. * The address field in the I2CCMD register is 3 bits and 0 is invalid.
* Therefore, we need to test 1-7 * Therefore, we need to test 1-7
@ -418,9 +428,12 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
phy->addr = 0; phy->addr = 0;
ret_val = -E1000_ERR_PHY; ret_val = -E1000_ERR_PHY;
goto out; goto out;
} else {
ret_val = igb_get_phy_id(hw);
} }
ret_val = igb_get_phy_id(hw); /* restore previous sfp cage power state */
wr32(E1000_CTRL_EXT, ctrl_ext);
out: out:
return ret_val; return ret_val;
@ -766,17 +779,18 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
} }
/** /**
* igb_shutdown_fiber_serdes_link_82575 - Remove link during power down * igb_shutdown_serdes_link_82575 - Remove link during power down
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* *
* In the case of fiber serdes, shut down optics and PCS on driver unload * In the case of fiber serdes, shut down optics and PCS on driver unload
* when management pass thru is not enabled. * when management pass thru is not enabled.
**/ **/
void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
{ {
u32 reg; u32 reg;
if (hw->phy.media_type != e1000_media_type_internal_serdes) if (hw->phy.media_type != e1000_media_type_internal_serdes ||
igb_sgmii_active_82575(hw))
return; return;
/* if the management interface is not enabled, then power down */ /* if the management interface is not enabled, then power down */
@ -788,7 +802,7 @@ void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw)
/* shutdown the laser */ /* shutdown the laser */
reg = rd32(E1000_CTRL_EXT); reg = rd32(E1000_CTRL_EXT);
reg |= E1000_CTRL_EXT_SDP7_DATA; reg |= E1000_CTRL_EXT_SDP3_DATA;
wr32(E1000_CTRL_EXT, reg); wr32(E1000_CTRL_EXT, reg);
/* flush the write to verify completion */ /* flush the write to verify completion */
@ -927,6 +941,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
wr32(E1000_CTRL, ctrl); wr32(E1000_CTRL, ctrl);
ret_val = igb_setup_serdes_link_82575(hw);
if (ret_val)
goto out;
if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
ret_val = hw->phy.ops.reset(hw);
if (ret_val) {
hw_dbg("Error resetting the PHY.\n");
goto out;
}
}
switch (hw->phy.type) { switch (hw->phy.type) {
case e1000_phy_m88: case e1000_phy_m88:
ret_val = igb_copper_link_setup_m88(hw); ret_val = igb_copper_link_setup_m88(hw);
@ -963,8 +988,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
} }
} }
igb_configure_pcs_link_82575(hw);
/* /*
* Check link status. Wait up to 100 microseconds for link to become * Check link status. Wait up to 100 microseconds for link to become
* valid. * valid.
@ -987,14 +1010,18 @@ out:
} }
/** /**
* igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes * igb_setup_serdes_link_82575 - Setup link for fiber/serdes
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* *
* Configures speed and duplex for fiber and serdes links. * Configures speed and duplex for fiber and serdes links.
**/ **/
static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
{ {
u32 reg; u32 ctrl_reg, reg;
if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
!igb_sgmii_active_82575(hw))
return 0;
/* /*
* On the 82575, SerDes loopback mode persists until it is * On the 82575, SerDes loopback mode persists until it is
@ -1004,26 +1031,38 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
*/ */
wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
/* Force link up, set 1gb, set both sw defined pins */ /* power on the sfp cage if present */
reg = rd32(E1000_CTRL);
reg |= E1000_CTRL_SLU |
E1000_CTRL_SPD_1000 |
E1000_CTRL_FRCSPD |
E1000_CTRL_SWDPIN0 |
E1000_CTRL_SWDPIN1;
wr32(E1000_CTRL, reg);
/* Power on phy for 82576 fiber adapters */
if (hw->mac.type == e1000_82576) {
reg = rd32(E1000_CTRL_EXT); reg = rd32(E1000_CTRL_EXT);
reg &= ~E1000_CTRL_EXT_SDP7_DATA; reg &= ~E1000_CTRL_EXT_SDP3_DATA;
wr32(E1000_CTRL_EXT, reg); wr32(E1000_CTRL_EXT, reg);
}
ctrl_reg = rd32(E1000_CTRL);
ctrl_reg |= E1000_CTRL_SLU;
if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
/* set both sw defined pins */
ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
/* Set switch control to serdes energy detect */ /* Set switch control to serdes energy detect */
reg = rd32(E1000_CONNSW); reg = rd32(E1000_CONNSW);
reg |= E1000_CONNSW_ENRGSRC; reg |= E1000_CONNSW_ENRGSRC;
wr32(E1000_CONNSW, reg); wr32(E1000_CONNSW, reg);
}
reg = rd32(E1000_PCS_LCTL);
if (igb_sgmii_active_82575(hw)) {
/* allow time for SFP cage to power up phy */
msleep(300);
/* AN time out should be disabled for SGMII mode */
reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
} else {
ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
E1000_CTRL_FD | E1000_CTRL_FRCDPX;
}
wr32(E1000_CTRL, ctrl_reg);
/* /*
* New SerDes mode allows for forcing speed or autonegotiating speed * New SerDes mode allows for forcing speed or autonegotiating speed
@ -1031,12 +1070,21 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
* mode that will be compatible with older link partners and switches. * mode that will be compatible with older link partners and switches.
* However, both are supported by the hardware and some drivers/tools. * However, both are supported by the hardware and some drivers/tools.
*/ */
reg = rd32(E1000_PCS_LCTL);
reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
if (hw->mac.autoneg) { /*
* We force flow control to prevent the CTRL register values from being
* overwritten by the autonegotiated flow control values
*/
reg |= E1000_PCS_LCTL_FORCE_FCTRL;
/*
* we always set sgmii to autoneg since it is the phy that will be
* forcing the link and the serdes is just a go-between
*/
if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
/* Set PCS register for autoneg */ /* Set PCS register for autoneg */
reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ reg |= E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
@ -1053,77 +1101,14 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
} }
if (hw->mac.type == e1000_82576) {
reg |= E1000_PCS_LCTL_FORCE_FCTRL;
igb_force_mac_fc(hw);
}
wr32(E1000_PCS_LCTL, reg); wr32(E1000_PCS_LCTL, reg);
if (!igb_sgmii_active_82575(hw))
igb_force_mac_fc(hw);
return 0; return 0;
} }
/**
* igb_configure_pcs_link_82575 - Configure PCS link
* @hw: pointer to the HW structure
*
* Configure the physical coding sub-layer (PCS) link. The PCS link is
* only used on copper connections where the serialized gigabit media
* independent interface (sgmii) is being used. Configures the link
* for auto-negotiation or forces speed/duplex.
**/
static void igb_configure_pcs_link_82575(struct e1000_hw *hw)
{
struct e1000_mac_info *mac = &hw->mac;
u32 reg = 0;
if (hw->phy.media_type != e1000_media_type_copper ||
!(igb_sgmii_active_82575(hw)))
return;
/* For SGMII, we need to issue a PCS autoneg restart */
reg = rd32(E1000_PCS_LCTL);
/* AN time out should be disabled for SGMII mode */
reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
if (mac->autoneg) {
/* Make sure forced speed and force link are not set */
reg &= ~(E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
/*
* The PHY should be setup prior to calling this function.
* All we need to do is restart autoneg and enable autoneg.
*/
reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE;
} else {
/* Set PCS register for forced speed */
/* Turn off bits for full duplex, speed, and autoneg */
reg &= ~(E1000_PCS_LCTL_FSV_1000 |
E1000_PCS_LCTL_FSV_100 |
E1000_PCS_LCTL_FDV_FULL |
E1000_PCS_LCTL_AN_ENABLE);
/* Check for duplex first */
if (mac->forced_speed_duplex & E1000_ALL_FULL_DUPLEX)
reg |= E1000_PCS_LCTL_FDV_FULL;
/* Now set speed */
if (mac->forced_speed_duplex & E1000_ALL_100_SPEED)
reg |= E1000_PCS_LCTL_FSV_100;
/* Force speed and force link */
reg |= E1000_PCS_LCTL_FSD |
E1000_PCS_LCTL_FORCE_LINK |
E1000_PCS_LCTL_FLV_LINK_UP;
hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n",
reg);
}
wr32(E1000_PCS_LCTL, reg);
}
/** /**
* igb_sgmii_active_82575 - Return sgmii state * igb_sgmii_active_82575 - Return sgmii state
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
@ -1248,7 +1233,8 @@ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
temp = rd32(E1000_LENERRS); temp = rd32(E1000_LENERRS);
/* This register should not be read in copper configurations */ /* This register should not be read in copper configurations */
if (hw->phy.media_type == e1000_media_type_internal_serdes) if (hw->phy.media_type == e1000_media_type_internal_serdes ||
igb_sgmii_active_82575(hw))
temp = rd32(E1000_SCVPC); temp = rd32(E1000_SCVPC);
} }

2
drivers/net/igb/e1000_82575.h
View File

@ -28,7 +28,7 @@
#ifndef _E1000_82575_H_ #ifndef _E1000_82575_H_
#define _E1000_82575_H_ #define _E1000_82575_H_
extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \

2
drivers/net/igb/e1000_defines.h
View File

@ -44,7 +44,7 @@
#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ #define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
/* Extended Device Control */ /* Extended Device Control */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
/* Physical Func Reset Done Indication */ /* Physical Func Reset Done Indication */
#define E1000_CTRL_EXT_PFRSTD 0x00004000 #define E1000_CTRL_EXT_PFRSTD 0x00004000
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000

2
drivers/net/igb/igb_main.c
View File

@ -5320,7 +5320,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
*enable_wake = wufc || adapter->en_mng_pt; *enable_wake = wufc || adapter->en_mng_pt;
if (!*enable_wake) if (!*enable_wake)
igb_shutdown_fiber_serdes_link_82575(hw); igb_shutdown_serdes_link_82575(hw);
/* Release control of h/w to f/w. If f/w is AMT enabled, this /* Release control of h/w to f/w. If f/w is AMT enabled, this
* would have already happened in close and is redundant. */ * would have already happened in close and is redundant. */