ath10k: enable alt data of TX path for sdio
The default credit size is 1792 bytes, but the IP mtu is 1500 bytes, then it has about 290 bytes's waste for each data packet on sdio transfer path for TX bundle, it will reduce the transmission utilization ratio for data packet. This patch enable the small credit size in firmware, firmware will use the new credit size 1556 bytes, it will increase the transmission utilization ratio for data packet on TX patch. It results in significant performance improvement on TX path. This patch only effect sdio chip, it will not effect PCI, SNOC etc. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200410061400.14231-3-wgong@codeaurora.org
This commit is contained in:
parent
c8334512f3
commit
2f918ea986
|
@ -725,10 +725,10 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
|
|||
|
||||
param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
|
||||
|
||||
/* Alternate credit size of 1544 as used by SDIO firmware is
|
||||
* not big enough for mac80211 / native wifi frames. disable it
|
||||
*/
|
||||
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
|
||||
if (mode == ATH10K_FIRMWARE_MODE_NORMAL)
|
||||
param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
|
||||
else
|
||||
param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
|
||||
|
||||
if (mode == ATH10K_FIRMWARE_MODE_UTF)
|
||||
param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
|
||||
|
|
|
@ -957,12 +957,16 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
|
|||
*/
|
||||
if (htc->control_resp_len >=
|
||||
sizeof(msg->hdr) + sizeof(msg->ready_ext)) {
|
||||
htc->alt_data_credit_size =
|
||||
__le16_to_cpu(msg->ready_ext.reserved) &
|
||||
ATH10K_HTC_MSG_READY_EXT_ALT_DATA_MASK;
|
||||
htc->max_msgs_per_htc_bundle =
|
||||
min_t(u8, msg->ready_ext.max_msgs_per_htc_bundle,
|
||||
HTC_HOST_MAX_MSG_PER_RX_BUNDLE);
|
||||
ath10k_dbg(ar, ATH10K_DBG_HTC,
|
||||
"Extended ready message. RX bundle size: %d\n",
|
||||
htc->max_msgs_per_htc_bundle);
|
||||
"Extended ready message RX bundle size %d alt size %d\n",
|
||||
htc->max_msgs_per_htc_bundle,
|
||||
htc->alt_data_credit_size);
|
||||
}
|
||||
|
||||
INIT_WORK(&ar->bundle_tx_work, ath10k_htc_bundle_tx_work);
|
||||
|
@ -1114,6 +1118,10 @@ setup:
|
|||
ep->tx_credits = tx_alloc;
|
||||
ep->tx_credit_size = htc->target_credit_size;
|
||||
|
||||
if (conn_req->service_id == ATH10K_HTC_SVC_ID_HTT_DATA_MSG &&
|
||||
htc->alt_data_credit_size != 0)
|
||||
ep->tx_credit_size = htc->alt_data_credit_size;
|
||||
|
||||
/* copy all the callbacks */
|
||||
ep->ep_ops = conn_req->ep_ops;
|
||||
|
||||
|
|
|
@ -119,6 +119,8 @@ enum ath10k_htc_conn_flags {
|
|||
#define ATH10K_HTC_CONN_FLAGS_RECV_ALLOC_LSB 8
|
||||
};
|
||||
|
||||
#define ATH10K_HTC_MSG_READY_EXT_ALT_DATA_MASK 0xFFF
|
||||
|
||||
enum ath10k_htc_conn_svc_status {
|
||||
ATH10K_HTC_CONN_SVC_STATUS_SUCCESS = 0,
|
||||
ATH10K_HTC_CONN_SVC_STATUS_NOT_FOUND = 1,
|
||||
|
@ -155,8 +157,14 @@ struct ath10k_htc_ready_extended {
|
|||
struct ath10k_htc_ready base;
|
||||
u8 htc_version; /* @enum ath10k_htc_version */
|
||||
u8 max_msgs_per_htc_bundle;
|
||||
u8 pad0;
|
||||
u8 pad1;
|
||||
union {
|
||||
__le16 reserved;
|
||||
struct {
|
||||
u8 pad0;
|
||||
u8 pad1;
|
||||
} __packed;
|
||||
} __packed;
|
||||
|
||||
} __packed;
|
||||
|
||||
struct ath10k_htc_conn_svc {
|
||||
|
@ -393,6 +401,7 @@ struct ath10k_htc {
|
|||
int total_transmit_credits;
|
||||
int target_credit_size;
|
||||
u8 max_msgs_per_htc_bundle;
|
||||
int alt_data_credit_size;
|
||||
};
|
||||
|
||||
int ath10k_htc_init(struct ath10k *ar);
|
||||
|
|
Loading…
Reference in New Issue