ARM: dt: microsom: don't set bit 7 for ethernet mux settings
Bit 6,7 are marked as reserved for the ethernet RGMII pins, so avoid setting these bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
This commit is contained in:
parent
c2bece3cb1
commit
2e3b965056
|
@ -26,25 +26,25 @@
|
|||
/* GPIO16 -> AR8035 25MHz */
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
|
||||
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
||||
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
||||
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
||||
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
|
||||
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
|
||||
/* AR8035 pin strapping: IO voltage: pull up */
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||||
/* AR8035 pin strapping: PHYADDR#0: pull down */
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0
|
||||
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
|
||||
/* AR8035 pin strapping: PHYADDR#1: pull down */
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0
|
||||
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
|
||||
/* AR8035 pin strapping: MODE#1: pull up */
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||||
/* AR8035 pin strapping: MODE#3: pull up */
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||||
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||||
/* AR8035 pin strapping: MODE#0: pull down */
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0
|
||||
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
|
||||
|
||||
/*
|
||||
* As the RMII pins are also connected to RGMII
|
||||
|
|
Loading…
Reference in New Issue