[FORCEDETH]: Fix reversing the MAC address on suspend.
For cards that initially have the MAC address stored in reverse order, the forcedeth driver uses a flag to signal whether the address was already corrected, so that it is not reversed again on a subsequent probe. Unfortunately this flag, which is stored in a register of the card, seems to get lost during suspend, resulting in the MAC address being reversed again. To fix that, the MAC address needs to be written back in reversed order before we suspend and the flag needs to be reset. The flag is still required because at least kexec will never write back the reversed address and thus needs to know what state the card is in. Signed-off-by: Bjrn Steinbrink <B.Steinbrink@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
1d39da3dca
commit
2e3884b5b1
|
@ -5199,10 +5199,6 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
|
|||
dev->dev_addr[3] = (np->orig_mac[0] >> 16) & 0xff;
|
||||
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
|
||||
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
|
||||
/* set permanent address to be correct aswell */
|
||||
np->orig_mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
|
||||
(dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
|
||||
np->orig_mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
|
||||
writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
|
||||
}
|
||||
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
|
||||
|
@ -5414,6 +5410,8 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
|
|||
*/
|
||||
writel(np->orig_mac[0], base + NvRegMacAddrA);
|
||||
writel(np->orig_mac[1], base + NvRegMacAddrB);
|
||||
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
|
||||
base + NvRegTransmitPoll);
|
||||
|
||||
/* free all structures */
|
||||
free_rings(dev);
|
||||
|
|
Loading…
Reference in New Issue