diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h new file mode 100644 index 000000000000..7c5d3a22da12 --- /dev/null +++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h @@ -0,0 +1,383 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of version 2.1 of the GNU + * Lesser General Public License as published by the Free Software Foundation. + * + * Copyright (c) 1999-2009 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 8 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 0 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */ +#define XCHAL_HAVE_MP_INTERRUPTS 1 /* interrupt distributor port */ +#define XCHAL_HAVE_MP_RUNSTALL 1 /* core RunStall control port */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 1 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 2 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */ +#define XCHAL_HAVE_DFP_accel 0 /* double precision FP acceleration pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */ +#define XCHAL_HAVE_HIFI2 1 /* HiFi2 Audio Engine pkg */ +#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 8 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 8 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ +#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */ +#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/ + +#define XCHAL_SW_VERSION 800000 /* sw version of this header */ + +#define XCHAL_CORE_ID "test_mmuhifi_c3" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_CORE_DESCRIPTION "test_mmuhifi_c3" +#define XCHAL_BUILD_UNIQUE_ID 0x00005A6A /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC1B3CBFE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x10405A6A /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX3.0.0" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2300 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 0 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 230000 /* major*100+minor */ +#define XCHAL_HW_REL_LX3 1 +#define XCHAL_HW_REL_LX3_0 1 +#define XCHAL_HW_REL_LX3_0_0 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2300 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 0 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 230000 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2300 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 0 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 230000 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ +#define XCHAL_DCACHE_IS_COHERENT 1 /* MP coherence feature */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 8 +#define XCHAL_DCACHE_SETWIDTH 8 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Cache access size in bytes (affects operation of SICW instruction): */ +#define XCHAL_ICACHE_ACCESS_SIZE 8 +#define XCHAL_DCACHE_ACCESS_SIZE 8 + +/* Number of encoded cache attr bits (see for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 2 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 12 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 4 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 9 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 2 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x00000FFF +#define XCHAL_INTLEVEL2_MASK 0x00000000 +#define XCHAL_INTLEVEL3_MASK 0x00000000 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00000000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x00000FFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x00000FFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 1 +#define XCHAL_INT9_LEVEL 1 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 1 +#define XCHAL_DEBUGLEVEL 2 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_EXTERN_LEVEL + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFFF000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000080 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000004 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x00000E3B +#define XCHAL_INTTYPE_MASK_TIMER 0x00000140 +#define XCHAL_INTTYPE_MASK_NMI 0x00000000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 8 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +/* (There are many interrupts each at level(s) 1.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 9 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 10 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 11 /* (intlevel 1) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0xD0000000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00000000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000 +#define XCHAL_RESET_VECTOR1_VADDR 0xD8000500 +#define XCHAL_RESET_VECTOR1_PADDR 0x00000500 +#define XCHAL_RESET_VECTOR_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0xD0000340 +#define XCHAL_USER_VECTOR_PADDR 0x00000340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD00003C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000003C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000280 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000280 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL2_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL2_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL2_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 0 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 0 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h new file mode 100644 index 000000000000..6e9d69caf7e6 --- /dev/null +++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h @@ -0,0 +1,182 @@ +/* + * This header file contains assembly-language definitions (assembly + * macros, etc.) for this specific Xtensa processor's TIE extensions + * and options. It is customized to this Xtensa processor configuration. + * + * This file is subject to the terms and conditions of version 2.1 of the GNU + * Lesser General Public License as published by the Free Software Foundation. + * + * Copyright (C) 1999-2009 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ + + + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (8 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rsr \at1, BR // boolean option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rsr \at1, SCOMPARE1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rur \at1, THREADPTR // threadptr option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_store + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (8 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wsr \at1, BR // boolean option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wsr \at1, SCOMPARE1 // conditional store option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wur \at1, THREADPTR // threadptr option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_load + + + +#define XCHAL_NCP_NUM_ATMPS 1 + + + +/* Macro to save the state of TIE coprocessor AudioEngineLX. + * Save area ptr (clobbered): ptr (8 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP1_NUM_ATMPS needed) + */ +#define xchal_cp_AudioEngineLX_store xchal_cp1_store +/* #define xchal_cp_AudioEngineLX_store_a2 xchal_cp1_store a2 a3 a4 a5 a6 */ + .macro xchal_cp1_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 8 + rur240 \at1 // AE_OVF_SAR + s32i \at1, \ptr, 0 + rur241 \at1 // AE_BITHEAD + s32i \at1, \ptr, 4 + rur242 \at1 // AE_TS_FTS_BU_BP + s32i \at1, \ptr, 8 + rur243 \at1 // AE_SD_NO + s32i \at1, \ptr, 12 + AE_SP24X2S.I aep0, \ptr, 16 + AE_SP24X2S.I aep1, \ptr, 24 + AE_SP24X2S.I aep2, \ptr, 32 + AE_SP24X2S.I aep3, \ptr, 40 + AE_SP24X2S.I aep4, \ptr, 48 + AE_SP24X2S.I aep5, \ptr, 56 + addi \ptr, \ptr, 64 + AE_SP24X2S.I aep6, \ptr, 0 + AE_SP24X2S.I aep7, \ptr, 8 + AE_SQ56S.I aeq0, \ptr, 16 + AE_SQ56S.I aeq1, \ptr, 24 + AE_SQ56S.I aeq2, \ptr, 32 + AE_SQ56S.I aeq3, \ptr, 40 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 64 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 112 + .endif + .endm // xchal_cp1_store + +/* Macro to restore the state of TIE coprocessor AudioEngineLX. + * Save area ptr (clobbered): ptr (8 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_CP1_NUM_ATMPS needed) + */ +#define xchal_cp_AudioEngineLX_load xchal_cp1_load +/* #define xchal_cp_AudioEngineLX_load_a2 xchal_cp1_load a2 a3 a4 a5 a6 */ + .macro xchal_cp1_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 0, 1, 8 + l32i \at1, \ptr, 0 + wur240 \at1 // AE_OVF_SAR + l32i \at1, \ptr, 4 + wur241 \at1 // AE_BITHEAD + l32i \at1, \ptr, 8 + wur242 \at1 // AE_TS_FTS_BU_BP + l32i \at1, \ptr, 12 + wur243 \at1 // AE_SD_NO + addi \ptr, \ptr, 80 + AE_LQ56.I aeq0, \ptr, 0 + AE_LQ56.I aeq1, \ptr, 8 + AE_LQ56.I aeq2, \ptr, 16 + AE_LQ56.I aeq3, \ptr, 24 + AE_LP24X2.I aep0, \ptr, -64 + AE_LP24X2.I aep1, \ptr, -56 + AE_LP24X2.I aep2, \ptr, -48 + AE_LP24X2.I aep3, \ptr, -40 + AE_LP24X2.I aep4, \ptr, -32 + AE_LP24X2.I aep5, \ptr, -24 + AE_LP24X2.I aep6, \ptr, -16 + AE_LP24X2.I aep7, \ptr, -8 + .set .Lxchal_pofs_, .Lxchal_pofs_ + 80 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 112 + .endif + .endm // xchal_cp1_load + +#define XCHAL_CP1_NUM_ATMPS 1 +#define XCHAL_SA_NUM_ATMPS 1 + + /* Empty macros for unconfigured coprocessors: */ + .macro xchal_cp0_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp0_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp2_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp3_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp4_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp5_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp6_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_store p a b c d continue=0 ofs=-1 select=-1 ; .endm + .macro xchal_cp7_load p a b c d continue=0 ofs=-1 select=-1 ; .endm + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h new file mode 100644 index 000000000000..fb1f5f004c92 --- /dev/null +++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h @@ -0,0 +1,140 @@ +/* + * This header file describes this specific Xtensa processor's TIE extensions + * that extend basic Xtensa core functionality. It is customized to this + * Xtensa processor configuration. + * + * This file is subject to the terms and conditions of version 2.1 of the GNU + * Lesser General Public License as published by the Free Software Foundation. + * + * Copyright (C) 1999-2009 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 1 /* number of coprocessors */ +#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP1_NAME "AudioEngineLX" +#define XCHAL_CP1_IDENT AudioEngineLX +#define XCHAL_CP1_SA_SIZE 112 /* size of state save area */ +#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */ +#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 +#define XCHAL_CP7_SA_SIZE 0 +#define XCHAL_CP7_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 12 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 128 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 8 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see ) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 3 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,0,1, br, 4, 4, 4,0x0204, sr,4 , 16,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 16 +#define XCHAL_CP1_SA_LIST(s) \ + XCHAL_SA_REG(s,0,0,1,0, ae_ovf_sar, 8, 4, 4,0x03F0, ur,240, 7,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ae_bithead, 4, 4, 4,0x03F1, ur,241, 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2, ur,242, 16,0,0,0) \ + XCHAL_SA_REG(s,0,0,1,0, ae_sd_no, 4, 4, 4,0x03F3, ur,243, 28,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep0, 8, 8, 8,0x0060, aep,0 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep1, 8, 8, 8,0x0061, aep,1 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep2, 8, 8, 8,0x0062, aep,2 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep3, 8, 8, 8,0x0063, aep,3 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep4, 8, 8, 8,0x0064, aep,4 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep5, 8, 8, 8,0x0065, aep,5 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep6, 8, 8, 8,0x0066, aep,6 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aep7, 8, 8, 8,0x0067, aep,7 , 48,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq0, 8, 8, 8,0x0068, aeq,0 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq1, 8, 8, 8,0x0069, aeq,1 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq2, 8, 8, 8,0x006A, aeq,2 , 56,0,0,0) \ + XCHAL_SA_REG(s,0,0,2,0, aeq3, 8, 8, 8,0x006B, aeq,3 , 56,0,0,0) + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8 + +#endif /*_XTENSA_CORE_TIE_H*/