Merge commit '683b6c6f82a60fabf47012581c2cfbf1b037ab95' into stable/for-linus-3.15

This merge of the irq-core-for-linus branch broke the ARM build when
Xen is enabled.

Conflicts:
	drivers/xen/events/events_base.c

Documentation/RCU/RTFP.txt

@@ -31,6 +31,14 @@ has lapsed, so this approach may be used in non-GPL software, if desired.
 (In contrast, implementation of RCU is permitted only in software licensed
 under either GPL or LGPL.  Sorry!!!)
 
+In 1987, Rashid et al. described lazy TLB-flush [RichardRashid87a].
+At first glance, this has nothing to do with RCU, but nevertheless
+this paper helped inspire the update-side batching used in the later
+RCU implementation in DYNIX/ptx.  In 1988, Barbara Liskov published
+a description of Argus that noted that use of out-of-date values can
+be tolerated in some situations.  Thus, this paper provides some early
+theoretical justification for use of stale data.
+
 In 1990, Pugh [Pugh90] noted that explicitly tracking which threads
 were reading a given data structure permitted deferred free to operate
 in the presence of non-terminating threads.  However, this explicit
@@ -41,11 +49,11 @@ providing a fine-grained locking design, however, it would be interesting
 to see how much of the performance advantage reported in 1990 remains
 today.
 
-At about this same time, Adams [Adams91] described ``chaotic relaxation'',
-where the normal barriers between successive iterations of convergent
-numerical algorithms are relaxed, so that iteration $n$ might use
-data from iteration $n-1$ or even $n-2$.  This introduces error,
-which typically slows convergence and thus increases the number of
+At about this same time, Andrews [Andrews91textbook] described ``chaotic
+relaxation'', where the normal barriers between successive iterations
+of convergent numerical algorithms are relaxed, so that iteration $n$
+might use data from iteration $n-1$ or even $n-2$.  This introduces
+error, which typically slows convergence and thus increases the number of
 iterations required.  However, this increase is sometimes more than made
 up for by a reduction in the number of expensive barrier operations,
 which are otherwise required to synchronize the threads at the end
@@ -55,7 +63,8 @@ is thus inapplicable to most data structures in operating-system kernels.
 
 In 1992, Henry (now Alexia) Massalin completed a dissertation advising
 parallel programmers to defer processing when feasible to simplify
-synchronization.  RCU makes extremely heavy use of this advice.
+synchronization [HMassalinPhD].  RCU makes extremely heavy use of
+this advice.
 
 In 1993, Jacobson [Jacobson93] verbally described what is perhaps the
 simplest deferred-free technique: simply waiting a fixed amount of time
@@ -90,27 +99,29 @@ mechanism, which is quite similar to RCU [Gamsa99].  These operating
 systems made pervasive use of RCU in place of "existence locks", which
 greatly simplifies locking hierarchies and helps avoid deadlocks.
 
-2001 saw the first RCU presentation involving Linux [McKenney01a]
-at OLS.  The resulting abundance of RCU patches was presented the
-following year [McKenney02a], and use of RCU in dcache was first
-described that same year [Linder02a].
+The year 2000 saw an email exchange that would likely have
+led to yet another independent invention of something like RCU
+[RustyRussell2000a,RustyRussell2000b].  Instead, 2001 saw the first
+RCU presentation involving Linux [McKenney01a] at OLS.  The resulting
+abundance of RCU patches was presented the following year [McKenney02a],
+and use of RCU in dcache was first described that same year [Linder02a].
 
 Also in 2002, Michael [Michael02b,Michael02a] presented "hazard-pointer"
 techniques that defer the destruction of data structures to simplify
 non-blocking synchronization (wait-free synchronization, lock-free
 synchronization, and obstruction-free synchronization are all examples of
-non-blocking synchronization).  In particular, this technique eliminates
-locking, reduces contention, reduces memory latency for readers, and
-parallelizes pipeline stalls and memory latency for writers.  However,
-these techniques still impose significant read-side overhead in the
-form of memory barriers.  Researchers at Sun worked along similar lines
-in the same timeframe [HerlihyLM02].  These techniques can be thought
-of as inside-out reference counts, where the count is represented by the
-number of hazard pointers referencing a given data structure rather than
-the more conventional counter field within the data structure itself.
-The key advantage of inside-out reference counts is that they can be
-stored in immortal variables, thus allowing races between access and
-deletion to be avoided.
+non-blocking synchronization).  The corresponding journal article appeared
+in 2004 [MagedMichael04a].  This technique eliminates locking, reduces
+contention, reduces memory latency for readers, and parallelizes pipeline
+stalls and memory latency for writers.  However, these techniques still
+impose significant read-side overhead in the form of memory barriers.
+Researchers at Sun worked along similar lines in the same timeframe
+[HerlihyLM02].  These techniques can be thought of as inside-out reference
+counts, where the count is represented by the number of hazard pointers
+referencing a given data structure rather than the more conventional
+counter field within the data structure itself.  The key advantage
+of inside-out reference counts is that they can be stored in immortal
+variables, thus allowing races between access and deletion to be avoided.
 
 By the same token, RCU can be thought of as a "bulk reference count",
 where some form of reference counter covers all reference by a given CPU
@@ -123,8 +134,10 @@ can be thought of in other terms as well.
 
 In 2003, the K42 group described how RCU could be used to create
 hot-pluggable implementations of operating-system functions [Appavoo03a].
-Later that year saw a paper describing an RCU implementation of System
-V IPC [Arcangeli03], and an introduction to RCU in Linux Journal
+Later that year saw a paper describing an RCU implementation
+of System V IPC [Arcangeli03] (following up on a suggestion by
+Hugh Dickins [Dickins02a] and an implementation by Mingming Cao
+[MingmingCao2002IPCRCU]), and an introduction to RCU in Linux Journal
 [McKenney03a].
 
 2004 has seen a Linux-Journal article on use of RCU in dcache
@@ -383,6 +396,21 @@ for Programming Languages and Operating Systems}"
 }
 }
 
+@phdthesis{HMassalinPhD
+,author="H. Massalin"
+,title="Synthesis: An Efficient Implementation of Fundamental Operating
+System Services"
+,school="Columbia University"
+,address="New York, NY"
+,year="1992"
+,annotation={
+	Mondo optimizing compiler.
+	Wait-free stuff.
+	Good advice: defer work to avoid synchronization.  See page 90
+		(PDF page 106), Section 5.4, fourth bullet point.
+}
+}
+
 @unpublished{Jacobson93
 ,author="Van Jacobson"
 ,title="Avoid Read-Side Locking Via Delayed Free"
@@ -671,6 +699,20 @@ Orran Krieger and Rusty Russell and Dipankar Sarma and Maneesh Soni"
 [Viewed October 18, 2004]"
 }
 
+@conference{Michael02b
+,author="Maged M. Michael"
+,title="High Performance Dynamic Lock-Free Hash Tables and List-Based Sets"
+,Year="2002"
+,Month="August"
+,booktitle="{Proceedings of the 14\textsuperscript{th} Annual ACM
+Symposium on Parallel
+Algorithms and Architecture}"
+,pages="73-82"
+,annotation={
+Like the title says...
+}
+}
+
 @Conference{Linder02a
 ,Author="Hanna Linder and Dipankar Sarma and Maneesh Soni"
 ,Title="Scalability of the Directory Entry Cache"
@@ -727,6 +769,24 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell"
 }
 }
 
+@conference{Michael02a
+,author="Maged M. Michael"
+,title="Safe Memory Reclamation for Dynamic Lock-Free Objects Using Atomic
+Reads and Writes"
+,Year="2002"
+,Month="August"
+,booktitle="{Proceedings of the 21\textsuperscript{st} Annual ACM
+Symposium on Principles of Distributed Computing}"
+,pages="21-30"
+,annotation={
+	Each thread keeps an array of pointers to items that it is
+	currently referencing.	Sort of an inside-out garbage collection
+	mechanism, but one that requires the accessing code to explicitly
+	state its needs.  Also requires read-side memory barriers on
+	most architectures.
+}
+}
+
 @unpublished{Dickins02a
 ,author="Hugh Dickins"
 ,title="Use RCU for System-V IPC"
@@ -735,6 +795,17 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell"
 ,note="private communication"
 }
 
+@InProceedings{HerlihyLM02
+,author={Maurice Herlihy and Victor Luchangco and Mark Moir}
+,title="The Repeat Offender Problem: A Mechanism for Supporting Dynamic-Sized,
+Lock-Free Data Structures"
+,booktitle={Proceedings of 16\textsuperscript{th} International
+Symposium on Distributed Computing}
+,year=2002
+,month="October"
+,pages="339-353"
+}
+
 @unpublished{Sarma02b
 ,Author="Dipankar Sarma"
 ,Title="Some dcache\_rcu benchmark numbers"
@@ -749,6 +820,19 @@ Andrea Arcangeli and Andi Kleen and Orran Krieger and Rusty Russell"
 }
 }
 
+@unpublished{MingmingCao2002IPCRCU
+,Author="Mingming Cao"
+,Title="[PATCH]updated ipc lock patch"
+,month="October"
+,year="2002"
+,note="Available:
+\url{https://lkml.org/lkml/2002/10/24/262}
+[Viewed February 15, 2014]"
+,annotation={
+	Mingming Cao's patch to introduce RCU to SysV IPC.
+}
+}
+
 @unpublished{LinusTorvalds2003a
 ,Author="Linus Torvalds"
 ,Title="Re: {[PATCH]} small fixes in brlock.h"
@@ -982,6 +1066,23 @@ Realtime Applications"
 }
 }
 
+@article{MagedMichael04a
+,author="Maged M. Michael"
+,title="Hazard Pointers: Safe Memory Reclamation for Lock-Free Objects"
+,Year="2004"
+,Month="June"
+,journal="IEEE Transactions on Parallel and Distributed Systems"
+,volume="15"
+,number="6"
+,pages="491-504"
+,url="Available:
+\url{http://www.research.ibm.com/people/m/michael/ieeetpds-2004.pdf}
+[Viewed March 1, 2005]"
+,annotation={
+	New canonical hazard-pointer citation.
+}
+}
+
 @phdthesis{PaulEdwardMcKenneyPhD
 ,author="Paul E. McKenney"
 ,title="Exploiting Deferred Destruction:

Documentation/RCU/checklist.txt

@@ -256,10 +256,10 @@ over a rather long period of time, but improvements are always welcome!
 		variations on this theme.
 
 	b.	Limiting update rate.  For example, if updates occur only
-		once per hour, then no explicit rate limiting is required,
-		unless your system is already badly broken.  The dcache
-		subsystem takes this approach -- updates are guarded
-		by a global lock, limiting their rate.
+		once per hour, then no explicit rate limiting is
+		required, unless your system is already badly broken.
+		Older versions of the dcache subsystem take this approach,
+		guarding updates with a global lock, limiting their rate.
 
 	c.	Trusted update -- if updates can only be done manually by
 		superuser or some other trusted user, then it might not
@@ -268,7 +268,8 @@ over a rather long period of time, but improvements are always welcome!
 		the machine.
 
 	d.	Use call_rcu_bh() rather than call_rcu(), in order to take
-		advantage of call_rcu_bh()'s faster grace periods.
+		advantage of call_rcu_bh()'s faster grace periods.  (This
+		is only a partial solution, though.)
 
 	e.	Periodically invoke synchronize_rcu(), permitting a limited
 		number of updates per grace period.
@@ -276,6 +277,13 @@ over a rather long period of time, but improvements are always welcome!
 	The same cautions apply to call_rcu_bh(), call_rcu_sched(),
 	call_srcu(), and kfree_rcu().
 
+	Note that although these primitives do take action to avoid memory
+	exhaustion when any given CPU has too many callbacks, a determined
+	user could still exhaust memory.  This is especially the case
+	if a system with a large number of CPUs has been configured to
+	offload all of its RCU callbacks onto a single CPU, or if the
+	system has relatively little free memory.
+
 9.	All RCU list-traversal primitives, which include
 	rcu_dereference(), list_for_each_entry_rcu(), and
 	list_for_each_safe_rcu(), must be either within an RCU read-side

Documentation/arm64/memory.txt

@@ -35,11 +35,13 @@ ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
 ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
 
+ffffffbffa000000	ffffffbffaffffff	  16MB		PCI I/O space
+
+ffffffbffb000000	ffffffbffbbfffff	  12MB		[guard]
+
 ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk device
 
-ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
-
-ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[guard]
+ffffffbffbe00000	ffffffbffbffffff	   2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 
@@ -60,11 +62,13 @@ fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
 
 fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[guard, future vmmemap]
 
+fffffdfffa000000	fffffdfffaffffff	  16MB		PCI I/O space
+
+fffffdfffb000000	fffffdfffbbfffff	  12MB		[guard]
+
 fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk device
 
-fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O space
-
-fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[guard]
+fffffdfffbe00000	fffffdfffbffffff	   2MB		[guard]
 
 fffffdfffc000000	fffffdffffffffff	  64MB		modules
 

Documentation/device-mapper/cache.txt

@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
 Updating on-disk metadata
 -------------------------
 
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written.  If no such requests are made then commits will occur every
-second.  This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target).  If
-power is lost you may lose some recent writes.  The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
 
 The 'dirty' state for a cache block changes far too frequently for us
 to keep updating it on the fly.  So we treat it as a hint.  In normal

Documentation/device-mapper/thin-provisioning.txt

@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
 userspace daemon can use this to detect a situation where a new table
 already exceeds the threshold.
 
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
 Thin provisioning
 -----------------
 
@@ -258,10 +287,9 @@ ii) Status
 	should register for the event and then check the target's status.
 
     held metadata root:
-	The location, in sectors, of the metadata root that has been
+	The location, in blocks, of the metadata root that has been
 	'held' for userspace read access.  '-' indicates there is no
-	held root.  This feature is not yet implemented so '-' is
-	always returned.
+	held root.
 
     discard_passdown|no_discard_passdown
 	Whether or not discards are actually being passed down to the

Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt

@@ -1,4 +1,4 @@
-Marvell Armada 370 and Armada XP Interrupt Controller
+Marvell Armada 370, 375, 38x, XP Interrupt Controller
 -----------------------------------------------------
 
 Required properties:
@@ -16,7 +16,13 @@ Required properties:
   automatically map to the interrupt controller registers of the
   current CPU)
 
+Optional properties:
 
+- interrupts: If defined, then it indicates that this MPIC is
+  connected as a slave to another interrupt controller. This is
+  typically the case on Armada 375 and Armada 38x, where the MPIC is
+  connected as a slave to the Cortex-A9 GIC. The provided interrupt
+  indicate to which GIC interrupt the MPIC output is connected.
 
 Example:
 

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -4,17 +4,33 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "snps,spear-ahci"
+- compatible        : compatible list, one of "snps,spear-ahci",
+                      "snps,exynos5440-ahci", "ibm,476gtr-ahci",
+                      "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
+                      "fsl,imx6q-ahci" or "snps,dwc-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
+- clocks            : a list of phandle + clock specifier pairs
+- target-supply     : regulator for SATA target power
 
-Example:
+"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
+- clocks            : must contain the sata, sata_ref and ahb clocks
+- clock-names       : must contain "ahb" for the ahb clock
+
+Examples:
         sata@ffe08000 {
 		compatible = "snps,spear-ahci";
 		reg = <0xffe08000 0x1000>;
 		interrupts = <115>;
-
+        };
+
+	ahci: sata@01c18000 {
+		compatible = "allwinner,sun4i-a10-ahci";
+		reg = <0x01c18000 0x1000>;
+		interrupts = <56>;
+		clocks = <&pll6 0>, <&ahb_gates 25>;
+		target-supply = <&reg_ahci_5v>;
 	};

Documentation/devicetree/bindings/ata/apm-xgene.txt

@@ -0,0 +1,76 @@
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible		: Shall contain:
+  * "apm,xgene-ahci"
+- reg			: First memory resource shall be the AHCI memory
+			  resource.
+			  Second memory resource shall be the host controller
+			  core memory resource.
+			  Third memory resource shall be the host controller
+			  diagnostic memory resource.
+			  4th memory resource shall be the host controller
+			  AXI memory resource.
+			  5th optional memory resource shall be the host
+			  controller MUX memory resource if required.
+- interrupts		: Interrupt-specifier for SATA host controller IRQ.
+- clocks		: Reference to the clock entry.
+- phys			: A list of phandles + phy-specifiers, one for each
+			  entry in phy-names.
+- phy-names		: Should contain:
+  * "sata-phy" for the SATA 6.0Gbps PHY
+
+Optional properties:
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+
+Example:
+		sataclk: sataclk {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <100000000>;
+			clock-output-names = "sataclk";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>,
+			      <0x0 0x1f237000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -21,9 +21,9 @@ Required Properties:
     must appear in the same order as the output clocks.
   - #clock-cells: Must be 1
   - clock-output-names: The name of the clocks as free-form strings
-  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
 
-The clocks, clock-output-names and renesas,indices properties contain one
+The clocks, clock-output-names and renesas,clock-indices properties contain one
 entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
 gate clocks must not be declared.
 

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

@@ -1,12 +1,16 @@
 * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
 
 Required properties:
-- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
-  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
-  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
-  "fsl,imx6q-sdma". The -to variants should be preferred since they
-  allow to determnine the correct ROM script addresses needed for
-  the driver to work without additional firmware.
+- compatible : Should be one of
+      "fsl,imx25-sdma"
+      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+      "fsl,imx51-sdma"
+      "fsl,imx53-sdma"
+      "fsl,imx6q-sdma"
+  The -to variants should be preferred since they allow to determnine the
+  correct ROM script addresses needed for the driver to work without additional
+  firmware.
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
 - #dma-cells : Must be <3>.

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt

@@ -2,7 +2,7 @@ Allwinner Sunxi Interrupt Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-ic"
+- compatible : should be "allwinner,sun4i-a10-ic"
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
@@ -11,7 +11,7 @@ Required properties:
 Example:
 
 intc: interrupt-controller {
-	compatible = "allwinner,sun4i-ic";
+	compatible = "allwinner,sun4i-a10-ic";
 	reg = <0x01c20400 0x400>;
 	interrupt-controller;
 	#interrupt-cells = <1>;

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt

@@ -0,0 +1,27 @@
+Allwinner Sunxi NMI Controller
+==============================
+
+Required properties:
+
+- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
+  "allwinner,sun6i-a31-sc-nmi"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 2. The first cell is the IRQ number, the
+  second cell the trigger type as defined in interrupt.txt in this directory.
+- interrupt-parent: Specifies the parent interrupt controller.
+- interrupts: Specifies the interrupt line (NMI) which is handled by
+  the interrupt controller in the parent controller's notation. This value
+  shall be the NMI.
+
+Example:
+
+sc-nmi-intc@01c00030 {
+	compatible = "allwinner,sun7i-a20-sc-nmi";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x01c00030 0x0c>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 0 4>;
+};

Documentation/devicetree/bindings/net/micrel-ks8851.txt

@@ -7,3 +7,4 @@ Required properties:
 
 Optional properties:
 - local-mac-address : Ethernet mac address to use
+- vdd-supply:	supply for Ethernet mac

Documentation/devicetree/bindings/net/opencores-ethoc.txt

@@ -0,0 +1,22 @@
+* OpenCores MAC 10/100 Mbps
+
+Required properties:
+- compatible: Should be "opencores,ethoc".
+- reg: two memory regions (address and length),
+  first region is for the device registers and descriptor rings,
+  second is for the device packet memory.
+- interrupts: interrupt for the device.
+
+Optional properties:
+- clocks: phandle to refer to the clk used as per
+  Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Examples:
+
+	enet0: ethoc@fd030000 {
+		compatible = "opencores,ethoc";
+		reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
+		interrupts = <1>;
+		local-mac-address = [00 50 c2 13 6f 00];
+		clocks = <&osc>;
+        };

Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node

Documentation/devicetree/bindings/timer/allwinner,sun4i-timer.txt

@@ -2,7 +2,7 @@ Allwinner A1X SoCs Timer Controller
 
 Required properties:
 
-- compatible : should be "allwinner,sun4i-timer"
+- compatible : should be "allwinner,sun4i-a10-timer"
 - reg : Specifies base physical address and size of the registers.
 - interrupts : The interrupt of the first timer
 - clocks: phandle to the source clock (usually a 24 MHz fixed clock)
@@ -10,7 +10,7 @@ Required properties:
 Example:
 
 timer {
-	compatible = "allwinner,sun4i-timer";
+	compatible = "allwinner,sun4i-a10-timer";
 	reg = <0x01c20c00 0x400>;
 	interrupts = <22>;
 	clocks = <&osc>;

Documentation/devicetree/bindings/timer/ti,keystone-timer.txt

@@ -0,0 +1,29 @@
+* Device tree bindings for Texas instruments Keystone timer
+
+This document provides bindings for the 64-bit timer in the KeyStone
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+It is global timer is a free running up-counter and can generate interrupt
+when the counter reaches preset counter values.
+
+Documentation:
+http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf
+
+Required properties:
+
+- compatible : should be "ti,keystone-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupt generated by the timer.
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+timer@22f0000 {
+	compatible = "ti,keystone-timer";
+	reg = <0x022f0000 0x80>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clktimer15>;
+};

Documentation/kernel-parameters.txt

@@ -1011,6 +1011,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			parameter will force ia64_sal_cache_flush to call
 			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
 
+	forcepae [X86-32]
+			Forcefully enable Physical Address Extension (PAE).
+			Many Pentium M systems disable PAE but may have a
+			functionally usable PAE implementation.
+			Warning: use of this parameter will taint the kernel
+			and may cause unknown problems.
+
 	ftrace=[tracer]
 			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
@@ -2053,8 +2060,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			IOAPICs that may be present in the system.
 
 	nokaslr		[X86]
-			Disable kernel base offset ASLR (Address Space
-			Layout Randomization) if built into the kernel.
+			Disable kernel and module base offset ASLR (Address
+			Space Layout Randomization) if built into the kernel.
 
 	noautogroup	Disable scheduler automatic task group creation.
 

Documentation/kernel-per-CPU-kthreads.txt

@@ -162,7 +162,18 @@ Purpose: Execute workqueue requests
 To reduce its OS jitter, do any of the following:
 1.	Run your workload at a real-time priority, which will allow
 	preempting the kworker daemons.
-2.	Do any of the following needed to avoid jitter that your
+2.	A given workqueue can be made visible in the sysfs filesystem
+	by passing the WQ_SYSFS to that workqueue's alloc_workqueue().
+	Such a workqueue can be confined to a given subset of the
+	CPUs using the /sys/devices/virtual/workqueue/*/cpumask sysfs
+	files.	The set of WQ_SYSFS workqueues can be displayed using
+	"ls sys/devices/virtual/workqueue".  That said, the workqueues
+	maintainer would like to caution people against indiscriminately
+	sprinkling WQ_SYSFS across all the workqueues.	The reason for
+	caution is that it is easy to add WQ_SYSFS, but because sysfs is
+	part of the formal user/kernel API, it can be nearly impossible
+	to remove it, even if its addition was a mistake.
+3.	Do any of the following needed to avoid jitter that your
 	application cannot tolerate:
 	a.	Build your kernel with CONFIG_SLUB=y rather than
 		CONFIG_SLAB=y, thus avoiding the slab allocator's periodic

Documentation/memory-barriers.txt

@@ -608,26 +608,30 @@ as follows:
 	b = p;  /* BUG: Compiler can reorder!!! */
 	do_something();
 
-The solution is again ACCESS_ONCE(), which preserves the ordering between
-the load from variable 'a' and the store to variable 'b':
+The solution is again ACCESS_ONCE() and barrier(), which preserves the
+ordering between the load from variable 'a' and the store to variable 'b':
 
 	q = ACCESS_ONCE(a);
 	if (q) {
+		barrier();
 		ACCESS_ONCE(b) = p;
 		do_something();
 	} else {
+		barrier();
 		ACCESS_ONCE(b) = p;
 		do_something_else();
 	}
 
-You could also use barrier() to prevent the compiler from moving
-the stores to variable 'b', but barrier() would not prevent the
-compiler from proving to itself that a==1 always, so ACCESS_ONCE()
-is also needed.
+The initial ACCESS_ONCE() is required to prevent the compiler from
+proving the value of 'a', and the pair of barrier() invocations are
+required to prevent the compiler from pulling the two identical stores
+to 'b' out from the legs of the "if" statement.
 
 It is important to note that control dependencies absolutely require a
 a conditional.  For example, the following "optimized" version of
-the above example breaks ordering:
+the above example breaks ordering, which is why the barrier() invocations
+are absolutely required if you have identical stores in both legs of
+the "if" statement:
 
 	q = ACCESS_ONCE(a);
 	ACCESS_ONCE(b) = p;  /* BUG: No ordering vs. load from a!!! */
@@ -643,9 +647,11 @@ It is of course legal for the prior load to be part of the conditional,
 for example, as follows:
 
 	if (ACCESS_ONCE(a) > 0) {
+		barrier();
 		ACCESS_ONCE(b) = q / 2;
 		do_something();
 	} else {
+		barrier();
 		ACCESS_ONCE(b) = q / 3;
 		do_something_else();
 	}
@@ -659,9 +665,11 @@ the needed conditional.  For example:
 
 	q = ACCESS_ONCE(a);
 	if (q % MAX) {
+		barrier();
 		ACCESS_ONCE(b) = p;
 		do_something();
 	} else {
+		barrier();
 		ACCESS_ONCE(b) = p;
 		do_something_else();
 	}
@@ -723,8 +731,13 @@ In summary:
       use smb_rmb(), smp_wmb(), or, in the case of prior stores and
       later loads, smp_mb().
 
+  (*) If both legs of the "if" statement begin with identical stores
+      to the same variable, a barrier() statement is required at the
+      beginning of each leg of the "if" statement.
+
   (*) Control dependencies require at least one run-time conditional
-      between the prior load and the subsequent store.  If the compiler
+      between the prior load and the subsequent store, and this
+      conditional must involve the prior load.  If the compiler
       is able to optimize the conditional away, it will have also
       optimized away the ordering.  Careful use of ACCESS_ONCE() can
       help to preserve the needed conditional.
@@ -1249,6 +1262,23 @@ The ACCESS_ONCE() function can prevent any number of optimizations that,
 while perfectly safe in single-threaded code, can be fatal in concurrent
 code.  Here are some examples of these sorts of optimizations:
 
+ (*) The compiler is within its rights to reorder loads and stores
+     to the same variable, and in some cases, the CPU is within its
+     rights to reorder loads to the same variable.  This means that
+     the following code:
+
+	a[0] = x;
+	a[1] = x;
+
+     Might result in an older value of x stored in a[1] than in a[0].
+     Prevent both the compiler and the CPU from doing this as follows:
+
+	a[0] = ACCESS_ONCE(x);
+	a[1] = ACCESS_ONCE(x);
+
+     In short, ACCESS_ONCE() provides cache coherence for accesses from
+     multiple CPUs to a single variable.
+
  (*) The compiler is within its rights to merge successive loads from
      the same variable.  Such merging can cause the compiler to "optimize"
      the following code:
@@ -1644,12 +1674,12 @@ for each construct.  These operations all imply certain barriers:
      Memory operations issued after the ACQUIRE will be completed after the
      ACQUIRE operation has completed.
 
-     Memory operations issued before the ACQUIRE may be completed after the
-     ACQUIRE operation has completed.  An smp_mb__before_spinlock(), combined
-     with a following ACQUIRE, orders prior loads against subsequent stores and
-     stores and prior stores against subsequent stores.  Note that this is
-     weaker than smp_mb()!  The smp_mb__before_spinlock() primitive is free on
-     many architectures.
+     Memory operations issued before the ACQUIRE may be completed after
+     the ACQUIRE operation has completed.  An smp_mb__before_spinlock(),
+     combined with a following ACQUIRE, orders prior loads against
+     subsequent loads and stores and also orders prior stores against
+     subsequent stores.  Note that this is weaker than smp_mb()!  The
+     smp_mb__before_spinlock() primitive is free on many architectures.
 
  (2) RELEASE operation implication:
 
@@ -1694,24 +1724,21 @@ may occur as:
 
 	ACQUIRE M, STORE *B, STORE *A, RELEASE M
 
-This same reordering can of course occur if the lock's ACQUIRE and RELEASE are
-to the same lock variable, but only from the perspective of another CPU not
-holding that lock.
+When the ACQUIRE and RELEASE are a lock acquisition and release,
+respectively, this same reordering can occur if the lock's ACQUIRE and
+RELEASE are to the same lock variable, but only from the perspective of
+another CPU not holding that lock.  In short, a ACQUIRE followed by an
+RELEASE may -not- be assumed to be a full memory barrier.
 
-In short, a RELEASE followed by an ACQUIRE may -not- be assumed to be a full
-memory barrier because it is possible for a preceding RELEASE to pass a
-later ACQUIRE from the viewpoint of the CPU, but not from the viewpoint
-of the compiler.  Note that deadlocks cannot be introduced by this
-interchange because if such a deadlock threatened, the RELEASE would
-simply complete.
-
-If it is necessary for a RELEASE-ACQUIRE pair to produce a full barrier, the
-ACQUIRE can be followed by an smp_mb__after_unlock_lock() invocation.  This
-will produce a full barrier if either (a) the RELEASE and the ACQUIRE are
-executed by the same CPU or task, or (b) the RELEASE and ACQUIRE act on the
-same variable.  The smp_mb__after_unlock_lock() primitive is free on many
-architectures.  Without smp_mb__after_unlock_lock(), the critical sections
-corresponding to the RELEASE and the ACQUIRE can cross:
+Similarly, the reverse case of a RELEASE followed by an ACQUIRE does not
+imply a full memory barrier.  If it is necessary for a RELEASE-ACQUIRE
+pair to produce a full barrier, the ACQUIRE can be followed by an
+smp_mb__after_unlock_lock() invocation.  This will produce a full barrier
+if either (a) the RELEASE and the ACQUIRE are executed by the same
+CPU or task, or (b) the RELEASE and ACQUIRE act on the same variable.
+The smp_mb__after_unlock_lock() primitive is free on many architectures.
+Without smp_mb__after_unlock_lock(), the CPU's execution of the critical
+sections corresponding to the RELEASE and the ACQUIRE can cross, so that:
 
 	*A = a;
 	RELEASE M
@@ -1722,7 +1749,36 @@ could occur as:
 
 	ACQUIRE N, STORE *B, STORE *A, RELEASE M
 
-With smp_mb__after_unlock_lock(), they cannot, so that:
+It might appear that this reordering could introduce a deadlock.
+However, this cannot happen because if such a deadlock threatened,
+the RELEASE would simply complete, thereby avoiding the deadlock.
+
+	Why does this work?
+
+	One key point is that we are only talking about the CPU doing
+	the reordering, not the compiler.  If the compiler (or, for
+	that matter, the developer) switched the operations, deadlock
+	-could- occur.
+
+	But suppose the CPU reordered the operations.  In this case,
+	the unlock precedes the lock in the assembly code.  The CPU
+	simply elected to try executing the later lock operation first.
+	If there is a deadlock, this lock operation will simply spin (or
+	try to sleep, but more on that later).	The CPU will eventually
+	execute the unlock operation (which preceded the lock operation
+	in the assembly code), which will unravel the potential deadlock,
+	allowing the lock operation to succeed.
+
+	But what if the lock is a sleeplock?  In that case, the code will
+	try to enter the scheduler, where it will eventually encounter
+	a memory barrier, which will force the earlier unlock operation
+	to complete, again unraveling the deadlock.  There might be
+	a sleep-unlock race, but the locking primitive needs to resolve
+	such races properly in any case.
+
+With smp_mb__after_unlock_lock(), the two critical sections cannot overlap.
+For example, with the following code, the store to *A will always be
+seen by other CPUs before the store to *B:
 
 	*A = a;
 	RELEASE M
@@ -1730,13 +1786,18 @@ With smp_mb__after_unlock_lock(), they cannot, so that:
 	smp_mb__after_unlock_lock();
 	*B = b;
 
-will always occur as either of the following:
+The operations will always occur in one of the following orders:
 
-	STORE *A, RELEASE, ACQUIRE, STORE *B
-	STORE *A, ACQUIRE, RELEASE, STORE *B
+	STORE *A, RELEASE, ACQUIRE, smp_mb__after_unlock_lock(), STORE *B
+	STORE *A, ACQUIRE, RELEASE, smp_mb__after_unlock_lock(), STORE *B
+	ACQUIRE, STORE *A, RELEASE, smp_mb__after_unlock_lock(), STORE *B
 
 If the RELEASE and ACQUIRE were instead both operating on the same lock
-variable, only the first of these two alternatives can occur.
+variable, only the first of these alternatives can occur.  In addition,
+the more strongly ordered systems may rule out some of the above orders.
+But in any case, as noted earlier, the smp_mb__after_unlock_lock()
+ensures that the store to *A will always be seen as happening before
+the store to *B.
 
 Locks and semaphores may not provide any guarantee of ordering on UP compiled
 systems, and so cannot be counted on in such a situation to actually achieve
@@ -2757,7 +2818,7 @@ in that order, but, without intervention, the sequence may have almost any
 combination of elements combined or discarded, provided the program's view of
 the world remains consistent.  Note that ACCESS_ONCE() is -not- optional
 in the above example, as there are architectures where a given CPU might
-interchange successive loads to the same location.  On such architectures,
+reorder successive loads to the same location.  On such architectures,
 ACCESS_ONCE() does whatever is necessary to prevent this, for example, on
 Itanium the volatile casts used by ACCESS_ONCE() cause GCC to emit the
 special ld.acq and st.rel instructions that prevent such reordering.

Documentation/networking/can.txt

@@ -554,12 +554,6 @@ solution for a couple of reasons:
   not specified in the struct can_frame and therefore it is only valid in
   CANFD_MTU sized CAN FD frames.
 
-  As long as the payload length is <=8 the received CAN frames from CAN FD
-  capable CAN devices can be received and read by legacy sockets too. When
-  user-generated CAN FD frames have a payload length <=8 these can be send
-  by legacy CAN network interfaces too. Sending CAN FD frames with payload
-  length > 8 to a legacy CAN network interface returns an -EMSGSIZE error.
-
   Implementation hint for new CAN applications:
 
   To build a CAN FD aware application use struct canfd_frame as basic CAN

Documentation/networking/netlink_mmap.txt

@@ -226,9 +226,9 @@ Ring setup:
 	void *rx_ring, *tx_ring;
 
 	/* Configure ring parameters */
-	if (setsockopt(fd, NETLINK_RX_RING, &req, sizeof(req)) < 0)
+	if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
 		exit(1);
-	if (setsockopt(fd, NETLINK_TX_RING, &req, sizeof(req)) < 0)
+	if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
 		exit(1)
 
 	/* Calculate size of each individual ring */

Documentation/networking/packet_mmap.txt

@@ -453,7 +453,7 @@ TP_STATUS_COPY        : This flag indicates that the frame (and associated
                         enabled previously with setsockopt() and 
                         the PACKET_COPY_THRESH option. 
 
-                        The number of frames than can be buffered to 
+                        The number of frames that can be buffered to
                         be read with recvfrom is limited like a normal socket.
                         See the SO_RCVBUF option in the socket (7) man page.
 

Documentation/networking/timestamping.txt

@@ -21,26 +21,38 @@ has such a feature).
 
 SO_TIMESTAMPING:
 
-Instructs the socket layer which kind of information is wanted. The
-parameter is an integer with some of the following bits set. Setting
-other bits is an error and doesn't change the current state.
+Instructs the socket layer which kind of information should be collected
+and/or reported.  The parameter is an integer with some of the following
+bits set. Setting other bits is an error and doesn't change the current
+state.
 
-SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamp in hardware
-SOF_TIMESTAMPING_TX_SOFTWARE:  if SOF_TIMESTAMPING_TX_HARDWARE is off or
-                               fails, then do it in software
-SOF_TIMESTAMPING_RX_HARDWARE:  return the original, unmodified time stamp
-                               as generated by the hardware
-SOF_TIMESTAMPING_RX_SOFTWARE:  if SOF_TIMESTAMPING_RX_HARDWARE is off or
-                               fails, then do it in software
-SOF_TIMESTAMPING_RAW_HARDWARE: return original raw hardware time stamp
-SOF_TIMESTAMPING_SYS_HARDWARE: return hardware time stamp transformed to
-                               the system time base
-SOF_TIMESTAMPING_SOFTWARE:     return system time stamp generated in
-                               software
+Four of the bits are requests to the stack to try to generate
+timestamps.  Any combination of them is valid.
 
-SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
-SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
-following control message:
+SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamps in hardware
+SOF_TIMESTAMPING_TX_SOFTWARE:  try to obtain send time stamps in software
+SOF_TIMESTAMPING_RX_HARDWARE:  try to obtain receive time stamps in hardware
+SOF_TIMESTAMPING_RX_SOFTWARE:  try to obtain receive time stamps in software
+
+The other three bits control which timestamps will be reported in a
+generated control message.  If none of these bits are set or if none of
+the set bits correspond to data that is available, then the control
+message will not be generated:
+
+SOF_TIMESTAMPING_SOFTWARE:     report systime if available
+SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available
+SOF_TIMESTAMPING_RAW_HARDWARE: report hwtimeraw if available
+
+It is worth noting that timestamps may be collected for reasons other
+than being requested by a particular socket with
+SOF_TIMESTAMPING_[TR]X_(HARD|SOFT)WARE.  For example, most drivers that
+can generate hardware receive timestamps ignore
+SOF_TIMESTAMPING_RX_HARDWARE.  It is still a good idea to set that flag
+in case future drivers pay attention.
+
+If timestamps are reported, they will appear in a control message with
+cmsg_level==SOL_SOCKET, cmsg_type==SO_TIMESTAMPING, and a payload like
+this:
 
 struct scm_timestamping {
 	struct timespec systime;

Documentation/sysctl/kernel.txt

@@ -320,10 +320,11 @@ This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 ==============================================================
 
-hung_task_warning:
+hung_task_warnings:
 
 The maximum number of warnings to report. During a check interval
-When this value is reached, no more the warnings will be reported.
+if a hung task is detected, this value is decreased by 1.
+When this value reaches 0, no more warnings will be reported.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 -1: report an infinite number of warnings.
@@ -441,8 +442,7 @@ feature should be disabled. Otherwise, if the system overhead from the
 feature is too high then the rate the kernel samples for NUMA hinting
 faults may be controlled by the numa_balancing_scan_period_min_ms,
 numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms,
-numa_balancing_scan_size_mb, numa_balancing_settle_count sysctls and
-numa_balancing_migrate_deferred.
+numa_balancing_scan_size_mb, and numa_balancing_settle_count sysctls.
 
 ==============================================================
 
@@ -483,13 +483,6 @@ rate for each task.
 numa_balancing_scan_size_mb is how many megabytes worth of pages are
 scanned for a given scan.
 
-numa_balancing_migrate_deferred is how many page migrations get skipped
-unconditionally, after a page migration is skipped because a page is shared
-with other tasks. This reduces page migration overhead, and determines
-how much stronger the "move task near its memory" policy scheduler becomes,
-versus the "move memory near its task" memory management policy, for workloads
-with shared memory.
-
 ==============================================================
 
 osrelease, ostype & version:

Documentation/x86/boot.txt

@@ -182,7 +182,7 @@ Offset	Proto	Name		Meaning
 0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
 0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
-022C/4	2.03+	ramdisk_max	Highest legal initrd address
+022C/4	2.03+	initrd_addr_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
@@ -534,7 +534,7 @@ Protocol:	2.02+
   zero, the kernel will assume that your boot loader does not support
   the 2.02+ protocol.
 
-Field name:	ramdisk_max
+Field name:	initrd_addr_max
 Type:		read
 Offset/size:	0x22c/4
 Protocol:	2.03+

MAINTAINERS

@@ -73,7 +73,8 @@ Descriptions of section entries:
 	L: Mailing list that is relevant to this area
 	W: Web-page with status/info
 	Q: Patchwork web based patch tracking system site
-	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit, topgit.
+	T: SCM tree type and location.
+	   Type is one of: git, hg, quilt, stgit, topgit
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -473,7 +474,7 @@ F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
 M:	David Airlie <airlied@linux.ie>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T:	git git://people.freedesktop.org/~airlied/linux (part of drm maint)
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
@@ -538,7 +539,7 @@ F:	arch/alpha/
 ALTERA UART/JTAG UART SERIAL DRIVERS
 M:	Tobias Klauser <tklauser@distanz.ch>
 L:	linux-serial@vger.kernel.org
-L:	nios2-dev@sopc.et.ntust.edu.tw (moderated for non-subscribers)
+L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/tty/serial/altera_uart.c
 F:	drivers/tty/serial/altera_jtaguart.c
@@ -910,11 +911,11 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Shawn Guo <shawn.guo@freescale.com>
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
 F:	arch/arm/mach-imx/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
@@ -1319,6 +1320,7 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	arch/arm/mach-u300/
+F:	drivers/clocksource/timer-u300.c
 F:	drivers/i2c/busses/i2c-stu300.c
 F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/watchdog/coh901327_wdt.c
@@ -1737,6 +1739,7 @@ F:	include/uapi/linux/bfs_fs.h
 BLACKFIN ARCHITECTURE
 M:	Steven Miao <realmz6@gmail.com>
 L:	adi-buildroot-devel@lists.sourceforge.net
+T:	git git://git.code.sf.net/p/adi-linux/code
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
@@ -1830,8 +1833,8 @@ F:	net/bluetooth/
 F:	include/net/bluetooth/
 
 BONDING DRIVER
-M:	Jay Vosburgh <fubar@us.ibm.com>
-M:	Veaceslav Falico <vfalico@redhat.com>
+M:	Jay Vosburgh <j.vosburgh@gmail.com>
+M:	Veaceslav Falico <vfalico@gmail.com>
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
@@ -2159,7 +2162,7 @@ F:	Documentation/zh_CN/
 
 CHIPIDEA USB HIGH SPEED DUAL ROLE CONTROLLER
 M:	Peter Chen <Peter.Chen@freescale.com>
-T:	git://github.com/hzpeterchen/linux-usb.git
+T:	git git://github.com/hzpeterchen/linux-usb.git
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
@@ -2382,7 +2385,7 @@ M:      Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org
-T:      git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 S:	Maintained
 F:	drivers/cpuidle/cpuidle-big_little.c
 
@@ -2391,7 +2394,7 @@ M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
-T:	git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/*
 F:	include/linux/cpuidle.h
 
@@ -2611,9 +2614,9 @@ DC395x SCSI driver
 M:	Oliver Neukum <oliver@neukum.org>
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
-W:	http://twibble.org/dist/dc395x/
 L:	dc395x@twibble.org
-L:	http://lists.twibble.org/mailman/listinfo/dc395x/
+W:	http://twibble.org/dist/dc395x/
+W:	http://lists.twibble.org/mailman/listinfo/dc395x/
 S:	Maintained
 F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
@@ -2799,9 +2802,9 @@ S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-M:	Rob Landley <rob@landley.net>
+M:	Randy Dunlap <rdunlap@infradead.org>
 L:	linux-doc@vger.kernel.org
-T:	TBD
+T:	quilt http://www.infradead.org/~rdunlap/Doc/patches/
 S:	Maintained
 F:	Documentation/
 
@@ -2848,12 +2851,22 @@ F:	lib/kobj*
 DRM DRIVERS
 M:	David Airlie <airlied@linux.ie>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T:	git git://people.freedesktop.org/~airlied/linux
 S:	Maintained
 F:	drivers/gpu/drm/
 F:	include/drm/
 F:	include/uapi/drm/
 
+RADEON DRM DRIVERS
+M:	Alex Deucher <alexander.deucher@amd.com>
+M:	Christian König <christian.koenig@amd.com>
+L:	dri-devel@lists.freedesktop.org
+T:	git git://people.freedesktop.org/~agd5f/linux
+S:	Supported
+F:	drivers/gpu/drm/radeon/
+F:	include/drm/radeon*
+F:	include/uapi/drm/radeon*
+
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Daniel Vetter <daniel.vetter@ffwll.ch>
 M:	Jani Nikula <jani.nikula@linux.intel.com>
@@ -3085,6 +3098,8 @@ F:	fs/ecryptfs/
 
 EDAC-CORE
 M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <bp@alien8.de>
+M:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -4531,6 +4546,7 @@ M:	Greg Rose <gregory.v.rose@intel.com>
 M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 M:	Mitch Williams <mitch.a.williams@intel.com>
+M:	Linux NICS <linux.nics@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://www.intel.com/support/feedback.htm
 W:	http://e1000.sourceforge.net/
@@ -4548,6 +4564,7 @@ F:	Documentation/networking/ixgbevf.txt
 F:	Documentation/networking/i40e.txt
 F:	Documentation/networking/i40evf.txt
 F:	drivers/net/ethernet/intel/
+F:	drivers/net/ethernet/intel/*/
 
 INTEL-MID GPIO DRIVER
 M:	David Cohen <david.a.cohen@linux.intel.com>
@@ -4904,7 +4921,7 @@ F:	drivers/staging/ktap/
 KCONFIG
 M:	"Yann E. MORIN" <yann.morin.1998@free.fr>
 L:	linux-kbuild@vger.kernel.org
-T:	git://gitorious.org/linux-kconfig/linux-kconfig
+T:	git git://gitorious.org/linux-kconfig/linux-kconfig
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
@@ -5501,6 +5518,11 @@ W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
+MARVELL ARMADA DRM SUPPORT
+M:	Russell King <rmk+kernel@arm.linux.org.uk>
+S:	Maintained
+F:	drivers/gpu/drm/armada/
+
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
 M:	Stephen Hemminger <stephen@networkplumber.org>
@@ -5718,7 +5740,7 @@ L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git://openfabrics.org/~eli/connect-ib.git
+T:	git git://openfabrics.org/~eli/connect-ib.git
 S:	Supported
 F:	drivers/net/ethernet/mellanox/mlx5/core/
 F:	include/linux/mlx5/
@@ -5728,7 +5750,7 @@ M:      Eli Cohen <eli@mellanox.com>
 L:	linux-rdma@vger.kernel.org
 W:	http://www.mellanox.com
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:      git://openfabrics.org/~eli/connect-ib.git
+T:	git git://openfabrics.org/~eli/connect-ib.git
 S:	Supported
 F:	include/linux/mlx5/
 F:	drivers/infiniband/hw/mlx5/
@@ -5983,6 +6005,9 @@ F:	include/linux/netdevice.h
 F:	include/uapi/linux/in.h
 F:	include/uapi/linux/net.h
 F:	include/uapi/linux/netdevice.h
+F:	tools/net/
+F:	tools/testing/selftests/net/
+F:	lib/random32.c
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
@@ -6156,6 +6181,12 @@ S:	Supported
 F:	drivers/block/nvme*
 F:	include/linux/nvme.h
 
+NXP TDA998X DRM DRIVER
+M:	Russell King <rmk+kernel@arm.linux.org.uk>
+S:	Supported
+F:	drivers/gpu/drm/i2c/tda998x_drv.c
+F:	include/drm/i2c/tda998x.h
+
 OMAP SUPPORT
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
@@ -7375,10 +7406,26 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 F:	arch/s390/
 F:	drivers/s390/
-F:	block/partitions/ibm.c
 F:	Documentation/s390/
 F:	Documentation/DocBook/s390*
 
+S390 COMMON I/O LAYER
+M:	Sebastian Ott <sebott@linux.vnet.ibm.com>
+M:	Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
+L:	linux-s390@vger.kernel.org
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+F:	drivers/s390/cio/
+
+S390 DASD DRIVER
+M:	Stefan Weinhuber <wein@de.ibm.com>
+M:	Stefan Haberland <stefan.haberland@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+F:	drivers/s390/block/dasd*
+F:	block/partitions/ibm.c
+
 S390 NETWORK DRIVERS
 M:	Ursula Braun <ursula.braun@de.ibm.com>
 M:	Frank Blaschka <blaschka@linux.vnet.ibm.com>
@@ -7388,6 +7435,15 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 F:	drivers/s390/net/
 
+S390 PCI SUBSYSTEM
+M:	Sebastian Ott <sebott@linux.vnet.ibm.com>
+M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+F:	arch/s390/pci/
+F:	drivers/pci/hotplug/s390_pci_hpc.c
+
 S390 ZCRYPT DRIVER
 M:	Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com>
 M:	linux390@de.ibm.com
@@ -8443,8 +8499,8 @@ TARGET SUBSYSTEM
 M:	Nicholas A. Bellinger <nab@linux-iscsi.org>
 L:	linux-scsi@vger.kernel.org
 L:	target-devel@vger.kernel.org
-L:	http://groups.google.com/group/linux-iscsi-target-dev
 W:	http://www.linux-iscsi.org
+W:	http://groups.google.com/group/linux-iscsi-target-dev
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 S:	Supported
 F:	drivers/target/
@@ -9797,7 +9853,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
 L:	mjpeg-users@lists.sourceforge.net
 L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+T:	hg http://linuxtv.org/hg/v4l-dvb
 S:	Odd Fixes
 F:	drivers/media/pci/zoran/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION =
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*
@@ -605,10 +605,11 @@ endif
 ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
   stackp-flag := -fstack-protector
   ifeq ($(call cc-option, $(stackp-flag)),)
-    $(warning Cannot use CONFIG_CC_STACKPROTECTOR: \
-	      -fstack-protector not supported by compiler))
+    $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
+             -fstack-protector not supported by compiler)
   endif
-else ifdef CONFIG_CC_STACKPROTECTOR_STRONG
+else
+ifdef CONFIG_CC_STACKPROTECTOR_STRONG
   stackp-flag := -fstack-protector-strong
   ifeq ($(call cc-option, $(stackp-flag)),)
     $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
@@ -618,6 +619,7 @@ else
   # Force off for distro compilers that enable stack protector by default.
   stackp-flag := $(call cc-option, -fno-stack-protector)
 endif
+endif
 KBUILD_CFLAGS += $(stackp-flag)
 
 # This warning generated too much noise in a regular build.

arch/alpha/include/asm/Kbuild

@@ -1,7 +1,9 @@
 
+
 generic-y += clkdev.h
-
+generic-y += cputime.h
 generic-y += exec.h
-generic-y += trace_clock.h
-generic-y += preempt.h
 generic-y += hash.h
+generic-y += mcs_spinlock.h
+generic-y += preempt.h
+generic-y += trace_clock.h

arch/alpha/include/asm/cputime.h

@@ -1,6 +0,0 @@
-#ifndef __ALPHA_CPUTIME_H
-#define __ALPHA_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __ALPHA_CPUTIME_H */

arch/arc/include/asm/Kbuild

@@ -1,15 +1,15 @@
 generic-y += auxvec.h
 generic-y += barrier.h
-generic-y += bugs.h
 generic-y += bitsperlong.h
+generic-y += bugs.h
 generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += device.h
 generic-y += div64.h
 generic-y += emergency-restart.h
 generic-y += errno.h
-generic-y += fcntl.h
 generic-y += fb.h
+generic-y += fcntl.h
 generic-y += ftrace.h
 generic-y += hardirq.h
 generic-y += hash.h
@@ -22,6 +22,7 @@ generic-y += kmap_types.h
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += mcs_spinlock.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += param.h
@@ -30,6 +31,7 @@ generic-y += pci.h
 generic-y += percpu.h
 generic-y += poll.h
 generic-y += posix_types.h
+generic-y += preempt.h
 generic-y += resource.h
 generic-y += scatterlist.h
 generic-y += sembuf.h
@@ -48,4 +50,3 @@ generic-y += ucontext.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
-generic-y += preempt.h

arch/arc/mm/cache_arc700.c

@@ -282,7 +282,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 #else
 	/* if V-P const for loop, PTAG can be written once outside loop */
 	if (full_page_op)
-		write_aux_reg(ARC_REG_DC_PTAG, paddr);
+		write_aux_reg(aux_tag, paddr);
 #endif
 
 	while (num_lines-- > 0) {
@@ -296,7 +296,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
 		write_aux_reg(aux_cmd, vaddr);
 		vaddr += L1_CACHE_BYTES;
 #else
-		write_aux_reg(aux, paddr);
+		write_aux_reg(aux_cmd, paddr);
 		paddr += L1_CACHE_BYTES;
 #endif
 	}

arch/arm/Kconfig

@@ -1578,6 +1578,7 @@ config BL_SWITCHER_DUMMY_IF
 
 choice
 	prompt "Memory split"
+	depends on MMU
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -1595,6 +1596,7 @@ endchoice
 
 config PAGE_OFFSET
 	hex
+	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
 	default 0xC0000000
@@ -1903,6 +1905,7 @@ config XEN
 	depends on ARM && AEABI && OF
 	depends on CPU_V7 && !CPU_V6
 	depends on !GENERIC_ATOMIC64
+	depends on MMU
 	select ARM_PSCI
 	select SWIOTLB_XEN
 	select ARCH_DMA_ADDR_T_64BIT

arch/arm/boot/compressed/.gitignore

@@ -1,4 +1,5 @@
 ashldi3.S
+bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S

arch/arm/boot/dts/bcm11351.dtsi

@@ -147,7 +147,7 @@
 	};
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 

arch/arm/boot/dts/keystone-clocks.dtsi

@@ -612,7 +612,7 @@ clocks {
 		compatible = "ti,keystone,psc-clock";
 		clocks = <&chipclk13>;
 		clock-output-names = "vcp-3";
-		reg = <0x0235000a8 0xb00>, <0x02350060 0x400>;
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
 		reg-names = "control", "domain";
 		domain-id = <24>;
 	};

arch/arm/boot/dts/omap3-gta04.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "OMAP3 GTA04";
-	compatible = "ti,omap3-gta04", "ti,omap3";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -14,7 +14,7 @@
 
 / {
 	model = "IGEPv2 (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0020", "ti,omap3";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/omap3-igep0030.dts

@@ -13,7 +13,7 @@
 
 / {
 	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-	compatible = "isee,omap3-igep0030", "ti,omap3";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
 	leds {
 		pinctrl-names = "default";

arch/arm/boot/dts/sama5d36.dtsi

@@ -8,8 +8,8 @@
  */
 #include "sama5d3.dtsi"
 #include "sama5d3_can.dtsi"
-#include "sama5d3_emac.dtsi"
 #include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
 #include "sama5d3_lcd.dtsi"
 #include "sama5d3_mci2.dtsi"
 #include "sama5d3_tcb1.dtsi"

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -331,7 +331,7 @@
 		};
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -403,7 +403,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -426,7 +426,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -294,7 +294,7 @@
 		};
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -366,7 +366,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -383,7 +383,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -275,7 +275,7 @@
 		ranges;
 
 		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-ic";
+			compatible = "allwinner,sun4i-a10-ic";
 			reg = <0x01c20400 0x400>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -329,7 +329,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <22>;
 			clocks = <&osc24M>;
@@ -346,7 +346,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <29>;
 		};

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -190,6 +190,14 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <0 32 4>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -231,7 +239,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <0 18 4>,
 				     <0 19 4>,

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -339,6 +339,14 @@
 		#size-cells = <1>;
 		ranges;
 
+		nmi_intc: interrupt-controller@01c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <0 0 4>;
+		};
+
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
@@ -435,7 +443,7 @@
 		};
 
 		timer@01c20c00 {
-			compatible = "allwinner,sun4i-timer";
+			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0x90>;
 			interrupts = <0 22 4>,
 				     <0 23 4>,
@@ -454,7 +462,7 @@
 		rtc: rtc@01c20d00 {
 			compatible = "allwinner,sun7i-a20-rtc";
 			reg = <0x01c20d00 0x20>;
-			interrupts = <0 24 1>;
+			interrupts = <0 24 4>;
 		};
 
 		sid: eeprom@01c23800 {
@@ -463,7 +471,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-ts";
+			compatible = "allwinner,sun4i-a10-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <0 29 4>;
 		};
@@ -596,10 +604,10 @@
 		hstimer@01c60000 {
 			compatible = "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
-			interrupts = <0 81 1>,
-				     <0 82 1>,
-				     <0 83 1>,
-				     <0 84 1>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>;
 			clocks = <&ahb_gates 28>;
 		};
 

arch/arm/boot/dts/zynq-7000.dtsi

@@ -24,6 +24,12 @@
 			device_type = "cpu";
 			reg = <0>;
 			clocks = <&clkc 3>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+				222223  1000000
+			>;
 		};
 
 		cpu@1 {

arch/arm/configs/tegra_defconfig

@@ -204,7 +204,10 @@ CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y

arch/arm/include/asm/Kbuild

@@ -7,16 +7,19 @@ generic-y += current.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
+generic-y += hash.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
 generic-y += kdebug.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += mcs_spinlock.h
 generic-y += msgbuf.h
 generic-y += param.h
 generic-y += parport.h
 generic-y += poll.h
+generic-y += preempt.h
 generic-y += resource.h
 generic-y += sections.h
 generic-y += segment.h
@@ -33,5 +36,3 @@ generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
 generic-y += unaligned.h
-generic-y += preempt.h
-generic-y += hash.h

arch/arm/include/asm/memory.h

@@ -30,14 +30,15 @@
  */
 #define UL(x) _AC(x, UL)
 
+/* PAGE_OFFSET - the virtual address of the start of the kernel image */
+#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
+
 #ifdef CONFIG_MMU
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
  */
-#define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(SZ_16M))
 #define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
@@ -104,10 +105,6 @@
 #define END_MEM     		(UL(CONFIG_DRAM_BASE) + CONFIG_DRAM_SIZE)
 #endif
 
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET		PLAT_PHYS_OFFSET
-#endif
-
 /*
  * The module can be at any place in ram in nommu mode.
  */

arch/arm/include/asm/topology.h

@@ -20,9 +20,6 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 #define topology_core_cpumask(cpu)	(&cpu_topology[cpu].core_sibling)
 #define topology_thread_cpumask(cpu)	(&cpu_topology[cpu].thread_sibling)
 
-#define mc_capable()	(cpu_topology[0].socket_id != -1)
-#define smt_capable()	(cpu_topology[0].thread_id != -1)
-
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
 const struct cpumask *cpu_coregroup_mask(int cpu);

arch/arm/kernel/head-common.S

@@ -177,6 +177,18 @@ __lookup_processor_type_data:
 	.long	__proc_info_end
 	.size	__lookup_processor_type_data, . - __lookup_processor_type_data
 
+__error_lpae:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_lpae
+	bl 	printascii
+	b	__error
+str_lpae: .asciz "\nError: Kernel with LPAE support, but CPU does not support LPAE.\n"
+#else
+	b	__error
+#endif
+	.align
+ENDPROC(__error_lpae)
+
 __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1

arch/arm/kernel/head.S

@@ -102,7 +102,7 @@ ENTRY(stext)
 	and	r3, r3, #0xf			@ extract VMSA support
 	cmp	r3, #5				@ long-descriptor translation table format?
  THUMB( it	lo )				@ force fixup-able long branch encoding
-	blo	__error_p			@ only classic page table format
+	blo	__error_lpae			@ only classic page table format
 #endif
 
 #ifndef CONFIG_XIP_KERNEL

arch/arm/kernel/process.c

@@ -30,7 +30,6 @@
 #include <linux/uaccess.h>
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
-#include <linux/cpuidle.h>
 #include <linux/leds.h>
 #include <linux/reboot.h>
 
@@ -133,7 +132,11 @@ EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 void (*arm_pm_idle)(void);
 
-static void default_idle(void)
+/*
+ * Called from the core idle loop.
+ */
+
+void arch_cpu_idle(void)
 {
 	if (arm_pm_idle)
 		arm_pm_idle();
@@ -167,15 +170,6 @@ void arch_cpu_idle_dead(void)
 }
 #endif
 
-/*
- * Called from the core idle loop.
- */
-void arch_cpu_idle(void)
-{
-	if (cpuidle_idle_call())
-		default_idle();
-}
-
 /*
  * Called by kexec, immediately prior to machine_kexec().
  *

arch/arm/kvm/arm.c

@@ -878,7 +878,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT) {
+	if (cmd == CPU_PM_EXIT &&
+	    __hyp_get_vectors() == hyp_default_vectors) {
 		cpu_init_hyp_mode(NULL);
 		return NOTIFY_OK;
 	}

arch/arm/kvm/interrupts.S

@@ -220,6 +220,10 @@ after_vfp_restore:
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
  * passed in r0 and r1.
  *
+ * A function pointer with a value of 0xffffffff has a special meaning,
+ * and is used to implement __hyp_get_vectors in the same way as in
+ * arch/arm/kernel/hyp_stub.S.
+ *
  * The calling convention follows the standard AAPCS:
  *   r0 - r3: caller save
  *   r12:     caller save
@@ -363,6 +367,11 @@ hyp_hvc:
 host_switch_to_hyp:
 	pop	{r0, r1, r2}
 
+	/* Check for __hyp_get_vectors */
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	beq	1f
+
 	push	{lr}
 	mrs	lr, SPSR
 	push	{lr}
@@ -378,7 +387,7 @@ THUMB(	orr	lr, #1)
 	pop	{lr}
 	msr	SPSR_csxf, lr
 	pop	{lr}
-	eret
+1:	eret
 
 guest_trap:
 	load_vcpu			@ Load VCPU pointer to r0

arch/arm/mach-davinci/da850.c

@@ -472,7 +472,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
 	CLK("vpif",		NULL,		&vpif_clk),
-	CLK("ahci",		NULL,		&sata_clk),
+	CLK("ahci_da850",		NULL,		&sata_clk),
 	CLK("davinci-rproc.0",	NULL,		&dsp_clk),
 	CLK("ehrpwm",		"fck",		&ehrpwm_clk),
 	CLK("ehrpwm",		"tbclk",	&ehrpwm_tbclk),

arch/arm/mach-davinci/devices-da8xx.c

@@ -1020,111 +1020,29 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
 }
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
-
 static struct resource da850_sata_resources[] = {
 	{
 		.start	= DA850_SATA_BASE,
 		.end	= DA850_SATA_BASE + 0x1fff,
 		.flags	= IORESOURCE_MEM,
 	},
+	{
+		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
+		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
 	{
 		.start	= IRQ_DA850_SATAINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-/* SATA PHY Control Register offset from AHCI base */
-#define SATA_P0PHYCR_REG	0x178
-
-#define SATA_PHY_MPY(x)		((x) << 0)
-#define SATA_PHY_LOS(x)		((x) << 6)
-#define SATA_PHY_RXCDR(x)	((x) << 10)
-#define SATA_PHY_RXEQ(x)	((x) << 13)
-#define SATA_PHY_TXSWING(x)	((x) << 19)
-#define SATA_PHY_ENPLL(x)	((x) << 31)
-
-static struct clk *da850_sata_clk;
-static unsigned long da850_sata_refclkpn;
-
-/* Supported DA850 SATA crystal frequencies */
-#define KHZ_TO_HZ(freq) ((freq) * 1000)
-static unsigned long da850_sata_xtal[] = {
-	KHZ_TO_HZ(300000),
-	KHZ_TO_HZ(250000),
-	0,			/* Reserved */
-	KHZ_TO_HZ(187500),
-	KHZ_TO_HZ(150000),
-	KHZ_TO_HZ(125000),
-	KHZ_TO_HZ(120000),
-	KHZ_TO_HZ(100000),
-	KHZ_TO_HZ(75000),
-	KHZ_TO_HZ(60000),
-};
-
-static int da850_sata_init(struct device *dev, void __iomem *addr)
-{
-	int i, ret;
-	unsigned int val;
-
-	da850_sata_clk = clk_get(dev, NULL);
-	if (IS_ERR(da850_sata_clk))
-		return PTR_ERR(da850_sata_clk);
-
-	ret = clk_prepare_enable(da850_sata_clk);
-	if (ret)
-		goto err0;
-
-	/* Enable SATA clock receiver */
-	val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-	val &= ~BIT(0);
-	__raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG));
-
-	/* Get the multiplier needed for 1.5GHz PLL output */
-	for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++)
-		if (da850_sata_xtal[i] == da850_sata_refclkpn)
-			break;
-
-	if (i == ARRAY_SIZE(da850_sata_xtal)) {
-		ret = -EINVAL;
-		goto err1;
-	}
-
-	val = SATA_PHY_MPY(i + 1) |
-		SATA_PHY_LOS(1) |
-		SATA_PHY_RXCDR(4) |
-		SATA_PHY_RXEQ(1) |
-		SATA_PHY_TXSWING(3) |
-		SATA_PHY_ENPLL(1);
-
-	__raw_writel(val, addr + SATA_P0PHYCR_REG);
-
-	return 0;
-
-err1:
-	clk_disable_unprepare(da850_sata_clk);
-err0:
-	clk_put(da850_sata_clk);
-	return ret;
-}
-
-static void da850_sata_exit(struct device *dev)
-{
-	clk_disable_unprepare(da850_sata_clk);
-	clk_put(da850_sata_clk);
-}
-
-static struct ahci_platform_data da850_sata_pdata = {
-	.init	= da850_sata_init,
-	.exit	= da850_sata_exit,
-};
-
 static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device da850_sata_device = {
-	.name	= "ahci",
+	.name	= "ahci_da850",
 	.id	= -1,
 	.dev	= {
-		.platform_data		= &da850_sata_pdata,
 		.dma_mask		= &da850_sata_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
@@ -1134,9 +1052,8 @@ static struct platform_device da850_sata_device = {
 
 int __init da850_register_sata(unsigned long refclkpn)
 {
-	da850_sata_refclkpn = refclkpn;
-	if (!da850_sata_refclkpn)
-		return -EINVAL;
+	/* please see comment in drivers/ata/ahci_da850.c */
+	BUG_ON(refclkpn != 100 * 1000 * 1000);
 
 	return platform_device_register(&da850_sata_device);
 }

arch/arm/mach-imx/pm-imx6q.c

@@ -120,7 +120,7 @@ static void imx6q_enable_wb(bool enable)
 
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
-	struct irq_desc *iomuxc_irq_desc;
+	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
 	u32 val = readl_relaxed(ccm_base + CLPCR);
 
 	val &= ~BM_CLPCR_LPM;
@@ -167,10 +167,9 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
 	 *    is set (set bits 0-1 of CCM_CLPCR).
 	 */
-	iomuxc_irq_desc = irq_to_desc(32);
-	imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
+	imx_gpc_irq_unmask(iomuxc_irq_data);
 	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
+	imx_gpc_irq_mask(iomuxc_irq_data);
 
 	return 0;
 }

arch/arm/mach-mmp/pm-mmp2.c

@@ -27,22 +27,8 @@
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {
-	int irq = d->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long data = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = d->irq;
 
 	/* enable wakeup sources */
 	switch (irq) {

arch/arm/mach-mmp/pm-pxa910.c

@@ -27,22 +27,8 @@
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {
-	int irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(data->irq);
 	uint32_t awucrm = 0, apcr = 0;
-
-	if (unlikely(irq >= nr_irqs)) {
-		pr_err("IRQ nubmers are out of boundary!\n");
-		return -EINVAL;
-	}
-
-	if (on) {
-		if (desc->action)
-			desc->action->flags |= IRQF_NO_SUSPEND;
-	} else {
-		if (desc->action)
-			desc->action->flags &= ~IRQF_NO_SUSPEND;
-	}
+	int irq = data->irq;
 
 	/* setting wakeup sources */
 	switch (irq) {
@@ -115,10 +101,12 @@ int pxa910_set_wake(struct irq_data *data, unsigned int on)
 		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
 			awucrm = MPMU_AWUCRM_WAKEUP(2);
 			apcr |= MPMU_APCR_SLPWP2;
-		} else
+		} else {
+			/* FIXME: This should return a proper error code ! */
 			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
 				irq);
 		}
+	}
 
 	if (on) {
 		if (awucrm) {

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -44,13 +44,10 @@ static unsigned int irq_counter[16];
 
 static irqreturn_t deferred_fiq(int irq, void *dev_id)
 {
-	struct irq_desc *irq_desc;
-	struct irq_chip *irq_chip = NULL;
 	int gpio, irq_num, fiq_count;
+	struct irq_chip *irq_chip;
 
-	irq_desc = irq_to_desc(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-	if (irq_desc)
-		irq_chip = irq_desc->irq_data.chip;
+	irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
 
 	/*
 	 * For each handled GPIO interrupt, keep calling its interrupt handler

arch/arm/mach-omap2/cclock3xxx_data.c

@@ -433,7 +433,9 @@ static const struct clk_ops dpll4_m5x2_ck_ops = {
 	.enable		= &omap2_dflt_clk_enable,
 	.disable	= &omap2_dflt_clk_disable,
 	.is_enabled	= &omap2_dflt_clk_is_enabled,
+	.set_rate	= &omap3_clkoutx2_set_rate,
 	.recalc_rate	= &omap3_clkoutx2_recalc,
+	.round_rate	= &omap3_clkoutx2_round_rate,
 };
 
 static const struct clk_ops dpll4_m5x2_ck_3630_ops = {

arch/arm/mach-omap2/cpuidle44xx.c

@@ -23,6 +23,8 @@
 #include "prm.h"
 #include "clockdomain.h"
 
+#define MAX_CPUS	2
+
 /* Machine specific information */
 struct idle_statedata {
 	u32 cpu_state;
@@ -48,11 +50,11 @@ static struct idle_statedata omap4_idle_data[] = {
 	},
 };
 
-static struct powerdomain *mpu_pd, *cpu_pd[NR_CPUS];
-static struct clockdomain *cpu_clkdm[NR_CPUS];
+static struct powerdomain *mpu_pd, *cpu_pd[MAX_CPUS];
+static struct clockdomain *cpu_clkdm[MAX_CPUS];
 
 static atomic_t abort_barrier;
-static bool cpu_done[NR_CPUS];
+static bool cpu_done[MAX_CPUS];
 static struct idle_statedata *state_ptr = &omap4_idle_data[0];
 
 /* Private functions */

arch/arm/mach-omap2/dpll3xxx.c

@@ -623,25 +623,12 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
 
 /* Clock control for DPLL outputs */
 
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
-				    unsigned long parent_rate)
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
 {
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
 	struct clk_hw_omap *pclk = NULL;
 	struct clk *parent;
 
-	if (!parent_rate)
-		return 0;
-
 	/* Walk up the parents of clk, looking for a DPLL */
 	do {
 		do {
@@ -656,9 +643,35 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	/* clk does not have a DPLL as a parent?  error in the clock data */
 	if (!pclk) {
 		WARN_ON(1);
-		return 0;
+		return NULL;
 	}
 
+	return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!parent_rate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
 	dd = pclk->dpll_data;
 
 	WARN_ON(!dd->enable_mask);
@@ -672,6 +685,55 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
 	return rate;
 }
 
+int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long parent_rate)
+{
+	return 0;
+}
+
+long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *prate)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!*prate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	/* TYPE J does not have a clkoutx2 */
+	if (dd->flags & DPLL_J_TYPE) {
+		*prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
+		return *prate;
+	}
+
+	WARN_ON(!dd->enable_mask);
+
+	v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* If in bypass, the rate is fixed to the bypass rate*/
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		return *prate;
+
+	if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
+		unsigned long best_parent;
+
+		best_parent = (rate / 2);
+		*prate = __clk_round_rate(__clk_get_parent(hw->clk),
+				best_parent);
+	}
+
+	return *prate * 2;
+}
+
 /* OMAP3/4 non-CORE DPLL clkops */
 const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
 	.allow_idle	= omap3_dpll_allow_idle,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1947,29 +1947,31 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 
 	_write_sysconfig(v, oh);
+
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
+	c = _wait_softreset_complete(oh);
+	if (c == MAX_MODULE_SOFTRESET_WAIT) {
+		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
+		ret = -ETIMEDOUT;
+		goto dis_opt_clks;
+	} else {
+		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
+	}
+
 	ret = _clear_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
 
 	_write_sysconfig(v, oh);
 
-	if (oh->class->sysc->srst_udelay)
-		udelay(oh->class->sysc->srst_udelay);
-
-	c = _wait_softreset_complete(oh);
-	if (c == MAX_MODULE_SOFTRESET_WAIT)
-		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
-			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
-	else
-		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
-
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
-
 dis_opt_clks:
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_disable_optional_clocks(oh);

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -1365,11 +1365,10 @@ static struct omap_hwmod_class_sysconfig dra7xx_spinlock_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -22,6 +22,8 @@
 #include "common-board-devices.h"
 #include "dss-common.h"
 #include "control.h"
+#include "omap-secure.h"
+#include "soc.h"
 
 struct pdata_init {
 	const char *compatible;
@@ -169,6 +171,22 @@ static void __init am3517_evm_legacy_init(void)
 	omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
 	omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
 }
+
+static void __init nokia_n900_legacy_init(void)
+{
+	hsmmc2_internal_input_clk();
+
+	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
+		if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
+			pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
+			/* set IBE to 1 */
+			rx51_secure_update_aux_cr(BIT(6), 0);
+		} else {
+			pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
+			pr_warning("Thumb binaries may crash randomly without this workaround\n");
+		}
+	}
+}
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -239,6 +257,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 #endif
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
+	OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
 	OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
@@ -259,7 +278,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
 	{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
-	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
+	{ "nokia,omap3-n900", nokia_n900_legacy_init, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/prminst44xx.c

@@ -183,11 +183,11 @@ void omap4_prminst_global_warm_sw_reset(void)
 					OMAP4_PRM_RSTCTRL_OFFSET);
 	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
 	omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
-				 OMAP4430_PRM_DEVICE_INST,
+				 dev_inst,
 				 OMAP4_PRM_RSTCTRL_OFFSET);
 
 	/* OCP barrier */
 	v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
-				    OMAP4430_PRM_DEVICE_INST,
+				    dev_inst,
 				    OMAP4_PRM_RSTCTRL_OFFSET);
 }

arch/arm/mach-sa1100/include/mach/collie.h

@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_COLLIE_H
 #define __ASM_ARCH_COLLIE_H
 
+#include "hardware.h" /* Gives GPIO_MAX */
+
 extern void locomolcd_power(int on);
 
 #define COLLIE_SCOOP_GPIO_BASE	(GPIO_MAX + 1)

arch/arm/mach-shmobile/Kconfig

@@ -24,17 +24,21 @@ comment "Renesas ARM SoCs System Type"
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
+	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -68,6 +72,8 @@ config ARCH_SH7372
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +83,8 @@ config ARCH_SH73A0
 	select I2C
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A73A4
 	bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +95,8 @@ config ARCH_R8A73A4
 	select RENESAS_IRQC
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +105,8 @@ config ARCH_R8A7740
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_CMT
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7778
 	bool "R-Car M1A (R8A77781)"
@@ -104,6 +116,7 @@ config ARCH_R8A7778
 	select ARM_GIC
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
@@ -114,6 +127,7 @@ config ARCH_R8A7779
 	select USB_ARCH_HAS_EHCI
 	select USB_ARCH_HAS_OHCI
 	select RENESAS_INTC_IRQPIN
+	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_R8A7790
 	bool "R-Car H2 (R8A77900)"
@@ -123,6 +137,7 @@ config ARCH_R8A7790
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
@@ -132,6 +147,7 @@ config ARCH_R8A7791
 	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
+	select SYS_SUPPORTS_SH_CMT
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
@@ -141,6 +157,7 @@ config ARCH_EMEV2
 	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
+	select SYS_SUPPORTS_EM_STI
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
@@ -148,6 +165,7 @@ config ARCH_R7S72100
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select SYS_SUPPORTS_SH_MTU2
 
 comment "Renesas ARM SoCs Board Type"
 
@@ -321,24 +339,6 @@ config SHMOBILE_TIMER_HZ
 	  want to select a HZ value such as 128 that can evenly divide RCLK.
 	  A HZ value that does not divide evenly may cause timer drift.
 
-config SH_TIMER_CMT
-	bool "CMT timer driver"
-	default y
-	help
-	  This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
-	bool "TMU timer driver"
-	default y
-	help
-	  This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
-	bool "STI timer driver"
-	default y
-	help
-	  This enables build of the STI timer driver.
-
 endmenu
 
 endif

arch/arm/mach-u300/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U300 machine.
 #
 
-obj-y		:= core.o timer.o
+obj-y		:= core.o
 obj-m		:=
 obj-n		:=
 obj-		:=

arch/arm/mach-zynq/Kconfig

@@ -2,6 +2,8 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
@@ -13,6 +15,6 @@ config ARCH_ZYNQ
 	select HAVE_SMP
 	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
-	select ARM_GLOBAL_TIMER
+	select ARM_GLOBAL_TIMER if !CPU_FREQ
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform

arch/arm/mach-zynq/common.c

@@ -64,6 +64,8 @@ static struct platform_device zynq_cpuidle_device = {
  */
 static void __init zynq_init_machine(void)
 {
+	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
 	/*
 	 * 64KB way size, 8-way associativity, parity disabled
 	 */
@@ -72,6 +74,7 @@ static void __init zynq_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	platform_device_register(&zynq_cpuidle_device);
+	platform_device_register_full(&devinfo);
 }
 
 static void __init zynq_timer_init(void)

arch/arm/mm/dump.c

@@ -264,6 +264,9 @@ static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
 			note_page(st, addr, 3, pmd_val(*pmd));
 		else
 			walk_pte(st, pmd, addr);
+
+		if (SECTION_SIZE < PMD_SIZE && pmd_large(pmd[1]))
+			note_page(st, addr + SECTION_SIZE, 3, pmd_val(pmd[1]));
 	}
 }
 

arch/arm64/Kconfig

@@ -16,6 +16,7 @@ config ARM64
 	select DCACHE_WORD_ACCESS
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -26,6 +27,7 @@ config ARM64
 	select GENERIC_TIME_VSYSCALL
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
@@ -38,6 +40,8 @@ config ARM64
 	select HAVE_MEMBLOCK
 	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
 	select NO_BOOTMEM
@@ -73,7 +77,7 @@ config LOCKDEP_SUPPORT
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-config RWSEM_GENERIC_SPINLOCK
+config RWSEM_XCHGADD_ALGORITHM
 	def_bool y
 
 config GENERIC_HWEIGHT
@@ -85,7 +89,7 @@ config GENERIC_CSUM
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
-config ZONE_DMA32
+config ZONE_DMA
 	def_bool y
 
 config ARCH_DMA_ADDR_T_64BIT
@@ -164,6 +168,22 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	depends on SMP
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+	bool "SMT scheduler support"
+	depends on SMP
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
@@ -301,6 +321,8 @@ menu "CPU Power Management"
 
 source "drivers/cpuidle/Kconfig"
 
+source "drivers/cpufreq/Kconfig"
+
 endmenu
 
 source "net/Kconfig"

arch/arm64/boot/dts/apm-storm.dtsi

@@ -176,6 +176,87 @@
 				reg-names = "csr-reg";
 				clock-output-names = "eth8clk";
 			};
+
+			sataphy1clk: sataphy1clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sata01clk: sata01clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata01clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata23clk: sata23clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata23clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata45clk: sata45clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata45clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
 		};
 
 		serial0: serial@1c020000 {
@@ -187,5 +268,76 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0x0 0x4c 0x4>;
 		};
+
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <1 10 10 2 10 10>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>,
+			      <0x0 0x1f217000 0x0 0x1000>;
+			interrupts = <0x0 0x86 0x4>;
+			status = "disabled";
+			clocks = <&sata01clk 0>;
+			phys = <&phy1 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			status = "ok";
+			clocks = <&sata23clk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			status = "ok";
+			clocks = <&sata45clk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
 	};
 };

arch/arm64/include/asm/Kbuild

@@ -12,6 +12,7 @@ generic-y += dma.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += ftrace.h
+generic-y += hash.h
 generic-y += hw_irq.h
 generic-y += ioctl.h
 generic-y += ioctls.h
@@ -22,13 +23,16 @@ generic-y += kmap_types.h
 generic-y += kvm_para.h
 generic-y += local.h
 generic-y += local64.h
+generic-y += mcs_spinlock.h
 generic-y += mman.h
 generic-y += msgbuf.h
 generic-y += mutex.h
 generic-y += pci.h
 generic-y += poll.h
 generic-y += posix_types.h
+generic-y += preempt.h
 generic-y += resource.h
+generic-y += rwsem.h
 generic-y += scatterlist.h
 generic-y += sections.h
 generic-y += segment.h
@@ -38,8 +42,8 @@ generic-y += shmbuf.h
 generic-y += sizes.h
 generic-y += socket.h
 generic-y += sockios.h
-generic-y += switch_to.h
 generic-y += swab.h
+generic-y += switch_to.h
 generic-y += termbits.h
 generic-y += termios.h
 generic-y += topology.h
@@ -49,5 +53,3 @@ generic-y += unaligned.h
 generic-y += user.h
 generic-y += vga.h
 generic-y += xor.h
-generic-y += preempt.h
-generic-y += hash.h

arch/arm64/include/asm/barrier.h

@@ -25,6 +25,7 @@
 #define wfi()		asm volatile("wfi" : : : "memory")
 
 #define isb()		asm volatile("isb" : : : "memory")
+#define dmb(opt)	asm volatile("dmb sy" : : : "memory")
 #define dsb(opt)	asm volatile("dsb sy" : : : "memory")
 
 #define mb()		dsb()

arch/arm64/include/asm/cacheflush.h

@@ -84,6 +84,13 @@ static inline void flush_cache_page(struct vm_area_struct *vma,
 {
 }
 
+/*
+ * Cache maintenance functions used by the DMA API. No to be used directly.
+ */
+extern void __dma_map_area(const void *, size_t, int);
+extern void __dma_unmap_area(const void *, size_t, int);
+extern void __dma_flush_range(const void *, const void *);
+
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user

arch/arm64/include/asm/compat.h

@@ -228,7 +228,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-#define compat_user_stack_pointer() (current_pt_regs()->compat_sp)
+#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
 
 static inline void __user *arch_compat_alloc_user_space(long len)
 {

arch/arm64/include/asm/cpufeature.h

@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_CPUFEATURE_H
+#define __ASM_CPUFEATURE_H
+
+#include <asm/hwcap.h>
+
+/*
+ * In the arm64 world (as in the ARM world), elf_hwcap is used both internally
+ * in the kernel and for user space to keep track of which optional features
+ * are supported by the current system. So let's map feature 'x' to HWCAP_x.
+ * Note that HWCAP_x constants are bit fields so we need to take the log.
+ */
+
+#define MAX_CPU_FEATURES	(8 * sizeof(elf_hwcap))
+#define cpu_feature(x)		ilog2(HWCAP_ ## x)
+
+static inline bool cpu_have_feature(unsigned int num)
+{
+	return elf_hwcap & (1UL << num);
+}
+
+#endif

arch/arm64/include/asm/debug-monitors.h

@@ -26,6 +26,53 @@
 #define DBG_ESR_EVT_HWWP	0x2
 #define DBG_ESR_EVT_BRK		0x6
 
+/*
+ * Break point instruction encoding
+ */
+#define BREAK_INSTR_SIZE		4
+
+/*
+ * ESR values expected for dynamic and compile time BRK instruction
+ */
+#define DBG_ESR_VAL_BRK(x)	(0xf2000000 | ((x) & 0xfffff))
+
+/*
+ * #imm16 values used for BRK instruction generation
+ * Allowed values for kgbd are 0x400 - 0x7ff
+ * 0x400: for dynamic BRK instruction
+ * 0x401: for compile time BRK instruction
+ */
+#define KGDB_DYN_DGB_BRK_IMM		0x400
+#define KDBG_COMPILED_DBG_BRK_IMM	0x401
+
+/*
+ * BRK instruction encoding
+ * The #imm16 value should be placed at bits[20:5] within BRK ins
+ */
+#define AARCH64_BREAK_MON	0xd4200000
+
+/*
+ * Extract byte from BRK instruction
+ */
+#define KGDB_DYN_DGB_BRK_INS_BYTE(x) \
+	((((AARCH64_BREAK_MON) & 0xffe0001f) >> (x * 8)) & 0xff)
+
+/*
+ * Extract byte from BRK #imm16
+ */
+#define KGBD_DYN_DGB_BRK_IMM_BYTE(x) \
+	(((((KGDB_DYN_DGB_BRK_IMM) & 0xffff) << 5) >> (x * 8)) & 0xff)
+
+#define KGDB_DYN_DGB_BRK_BYTE(x) \
+	(KGDB_DYN_DGB_BRK_INS_BYTE(x) | KGBD_DYN_DGB_BRK_IMM_BYTE(x))
+
+#define  KGDB_DYN_BRK_INS_BYTE0  KGDB_DYN_DGB_BRK_BYTE(0)
+#define  KGDB_DYN_BRK_INS_BYTE1  KGDB_DYN_DGB_BRK_BYTE(1)
+#define  KGDB_DYN_BRK_INS_BYTE2  KGDB_DYN_DGB_BRK_BYTE(2)
+#define  KGDB_DYN_BRK_INS_BYTE3  KGDB_DYN_DGB_BRK_BYTE(3)
+
+#define CACHE_FLUSH_IS_SAFE		1
+
 enum debug_el {
 	DBG_ACTIVE_EL0 = 0,
 	DBG_ACTIVE_EL1,
@@ -43,23 +90,6 @@ enum debug_el {
 #ifndef __ASSEMBLY__
 struct task_struct;
 
-#define local_dbg_save(flags)							\
-	do {									\
-		typecheck(unsigned long, flags);				\
-		asm volatile(							\
-		"mrs	%0, daif			// local_dbg_save\n"	\
-		"msr	daifset, #8"						\
-		: "=r" (flags) : : "memory");					\
-	} while (0)
-
-#define local_dbg_restore(flags)						\
-	do {									\
-		typecheck(unsigned long, flags);				\
-		asm volatile(							\
-		"msr	daif, %0			// local_dbg_restore\n"	\
-		: : "r" (flags) : "memory");					\
-	} while (0)
-
 #define DBG_ARCH_ID_RESERVED	0	/* In case of ptrace ABI updates. */
 
 #define DBG_HOOK_HANDLED	0

arch/arm64/include/asm/dma-mapping.h

@@ -30,6 +30,8 @@
 
 #define DMA_ERROR_CODE	(~(dma_addr_t)0)
 extern struct dma_map_ops *dma_ops;
+extern struct dma_map_ops coherent_swiotlb_dma_ops;
+extern struct dma_map_ops noncoherent_swiotlb_dma_ops;
 
 static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
 {
@@ -47,6 +49,11 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 		return __generic_dma_ops(dev);
 }
 
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
 #include <asm-generic/dma-mapping-common.h>
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)

arch/arm64/include/asm/hwcap.h

@@ -32,6 +32,12 @@
 #define COMPAT_HWCAP_IDIV	(COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
 #define COMPAT_HWCAP_EVTSTRM	(1 << 21)
 
+#define COMPAT_HWCAP2_AES	(1 << 0)
+#define COMPAT_HWCAP2_PMULL	(1 << 1)
+#define COMPAT_HWCAP2_SHA1	(1 << 2)
+#define COMPAT_HWCAP2_SHA2	(1 << 3)
+#define COMPAT_HWCAP2_CRC32	(1 << 4)
+
 #ifndef __ASSEMBLY__
 /*
  * This yields a mask that user programs can use to figure out what
@@ -41,7 +47,8 @@
 
 #ifdef CONFIG_COMPAT
 #define COMPAT_ELF_HWCAP	(compat_elf_hwcap)
-extern unsigned int compat_elf_hwcap;
+#define COMPAT_ELF_HWCAP2	(compat_elf_hwcap2)
+extern unsigned int compat_elf_hwcap, compat_elf_hwcap2;
 #endif
 
 extern unsigned long elf_hwcap;

arch/arm64/include/asm/io.h

@@ -121,7 +121,7 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
  *  I/O port access primitives.
  */
 #define IO_SPACE_LIMIT		0xffff
-#define PCI_IOBASE		((void __iomem *)(MODULES_VADDR - SZ_2M))
+#define PCI_IOBASE		((void __iomem *)(MODULES_VADDR - SZ_32M))
 
 static inline u8 inb(unsigned long addr)
 {

arch/arm64/include/asm/irqflags.h

@@ -90,5 +90,28 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 	return flags & PSR_I_BIT;
 }
 
+/*
+ * save and restore debug state
+ */
+#define local_dbg_save(flags)						\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		asm volatile(						\
+		"mrs    %0, daif		// local_dbg_save\n"	\
+		"msr    daifset, #8"					\
+		: "=r" (flags) : : "memory");				\
+	} while (0)
+
+#define local_dbg_restore(flags)					\
+	do {								\
+		typecheck(unsigned long, flags);			\
+		asm volatile(						\
+		"msr    daif, %0		// local_dbg_restore\n"	\
+		: : "r" (flags) : "memory");				\
+	} while (0)
+
+#define local_dbg_enable()	asm("msr	daifclr, #8" : : : "memory")
+#define local_dbg_disable()	asm("msr	daifset, #8" : : : "memory")
+
 #endif
 #endif

arch/arm64/include/asm/kgdb.h

@@ -0,0 +1,84 @@
+/*
+ * AArch64 KGDB support
+ *
+ * Based on arch/arm/include/kgdb.h
+ *
+ * Copyright (C) 2013 Cavium Inc.
+ * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KGDB_H
+#define __ARM_KGDB_H
+
+#include <linux/ptrace.h>
+#include <asm/debug-monitors.h>
+
+#ifndef	__ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm ("brk %0" : : "I" (KDBG_COMPILED_DBG_BRK_IMM));
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * gdb is expecting the following registers layout.
+ *
+ * General purpose regs:
+ *     r0-r30: 64 bit
+ *     sp,pc : 64 bit
+ *     pstate  : 64 bit
+ *     Total: 34
+ * FPU regs:
+ *     f0-f31: 128 bit
+ *     Total: 32
+ * Extra regs
+ *     fpsr & fpcr: 32 bit
+ *     Total: 2
+ *
+ */
+
+#define _GP_REGS		34
+#define _FP_REGS		32
+#define _EXTRA_REGS		2
+/*
+ * general purpose registers size in bytes.
+ * pstate is only 4 bytes. subtract 4 bytes
+ */
+#define GP_REG_BYTES		(_GP_REGS * 8)
+#define DBG_MAX_REG_NUM		(_GP_REGS + _FP_REGS + _EXTRA_REGS)
+
+/*
+ * Size of I/O buffer for gdb packet.
+ * considering to hold all register contents, size is set
+ */
+
+#define BUFMAX			2048
+
+/*
+ * Number of bytes required for gdb_regs buffer.
+ * _GP_REGS: 8 bytes, _FP_REGS: 16 bytes and _EXTRA_REGS: 4 bytes each
+ * GDB fails to connect for size beyond this with error
+ * "'g' packet reply is too long"
+ */
+
+#define NUMREGBYTES	((_GP_REGS * 8) + (_FP_REGS * 16) + \
+			(_EXTRA_REGS * 4))
+
+#endif /* __ASM_KGDB_H */

arch/arm64/include/asm/kvm_arm.h

@@ -106,7 +106,6 @@
 
 /* VTCR_EL2 Registers bits */
 #define VTCR_EL2_PS_MASK	(7 << 16)
-#define VTCR_EL2_PS_40B		(2 << 16)
 #define VTCR_EL2_TG0_MASK	(1 << 14)
 #define VTCR_EL2_TG0_4K		(0 << 14)
 #define VTCR_EL2_TG0_64K	(1 << 14)
@@ -129,10 +128,9 @@
  * 64kB pages (TG0 = 1)
  * 2 level page tables (SL = 1)
  */
-#define VTCR_EL2_FLAGS		(VTCR_EL2_PS_40B | VTCR_EL2_TG0_64K | \
-				 VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
-				 VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
-				 VTCR_EL2_T0SZ_40B)
+#define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
+				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
 #define VTTBR_X		(38 - VTCR_EL2_T0SZ_40B)
 #else
 /*
@@ -142,10 +140,9 @@
  * 4kB pages (TG0 = 0)
  * 3 level page tables (SL = 1)
  */
-#define VTCR_EL2_FLAGS		(VTCR_EL2_PS_40B | VTCR_EL2_TG0_4K | \
-				 VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
-				 VTCR_EL2_IRGN0_WBWA | VTCR_EL2_SL0_LVL1 | \
-				 VTCR_EL2_T0SZ_40B)
+#define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
+				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
 #define VTTBR_X		(37 - VTCR_EL2_T0SZ_40B)
 #endif
 

arch/arm64/include/asm/percpu.h

@@ -16,6 +16,8 @@
 #ifndef __ASM_PERCPU_H
 #define __ASM_PERCPU_H
 
+#ifdef CONFIG_SMP
+
 static inline void set_my_cpu_offset(unsigned long off)
 {
 	asm volatile("msr tpidr_el1, %0" :: "r" (off) : "memory");
@@ -36,6 +38,12 @@ static inline unsigned long __my_cpu_offset(void)
 }
 #define __my_cpu_offset __my_cpu_offset()
 
+#else	/* !CONFIG_SMP */
+
+#define set_my_cpu_offset(x)	do { } while (0)
+
+#endif /* CONFIG_SMP */
+
 #include <asm-generic/percpu.h>
 
 #endif /* __ASM_PERCPU_H */

arch/arm64/include/asm/pgtable-hwdef.h

@@ -100,9 +100,9 @@
 #define PTE_HYP			PTE_USER
 
 /*
- * 40-bit physical address supported.
+ * Highest possible physical address supported.
  */
-#define PHYS_MASK_SHIFT		(40)
+#define PHYS_MASK_SHIFT		(48)
 #define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
 
 /*
@@ -122,7 +122,6 @@
 #define TCR_SHARED		((UL(3) << 12) | (UL(3) << 28))
 #define TCR_TG0_64K		(UL(1) << 14)
 #define TCR_TG1_64K		(UL(1) << 30)
-#define TCR_IPS_40BIT		(UL(2) << 32)
 #define TCR_ASID16		(UL(1) << 36)
 #define TCR_TBI0		(UL(1) << 37)
 

arch/arm64/include/asm/pgtable.h

@@ -136,11 +136,11 @@ extern struct page *empty_zero_page;
 /*
  * The following only work if pte_present(). Undefined behaviour otherwise.
  */
-#define pte_present(pte)	(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE))
-#define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & PTE_AF)
-#define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
-#define pte_write(pte)		(pte_val(pte) & PTE_WRITE)
+#define pte_present(pte)	(!!(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)))
+#define pte_dirty(pte)		(!!(pte_val(pte) & PTE_DIRTY))
+#define pte_young(pte)		(!!(pte_val(pte) & PTE_AF))
+#define pte_special(pte)	(!!(pte_val(pte) & PTE_SPECIAL))
+#define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #define pte_valid_user(pte) \
@@ -199,7 +199,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
 	if (pte_valid_user(pte)) {
-		if (pte_exec(pte))
+		if (!pte_special(pte) && pte_exec(pte))
 			__sync_icache_dcache(pte, addr);
 		if (pte_dirty(pte) && pte_write(pte))
 			pte_val(pte) &= ~PTE_RDONLY;
@@ -227,36 +227,36 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 
 #define __HAVE_ARCH_PTE_SPECIAL
 
-/*
- * Software PMD bits for THP
- */
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
 
-#define PMD_SECT_DIRTY		(_AT(pmdval_t, 1) << 55)
-#define PMD_SECT_SPLITTING	(_AT(pmdval_t, 1) << 57)
+static inline pmd_t pte_pmd(pte_t pte)
+{
+	return __pmd(pte_val(pte));
+}
 
 /*
  * THP definitions.
  */
-#define pmd_young(pmd)		(pmd_val(pmd) & PMD_SECT_AF)
-
-#define __HAVE_ARCH_PMD_WRITE
-#define pmd_write(pmd)		(!(pmd_val(pmd) & PMD_SECT_RDONLY))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
-#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING)
+#define pmd_trans_splitting(pmd)	pte_special(pmd_pte(pmd))
 #endif
 
-#define PMD_BIT_FUNC(fn,op) \
-static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
+#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
+#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mksplitting(pmd)	pte_pmd(pte_mkspecial(pmd_pte(pmd)))
+#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mknotpresent(pmd)	(__pmd(pmd_val(pmd) &= ~PMD_TYPE_MASK))
 
-PMD_BIT_FUNC(wrprotect,	|= PMD_SECT_RDONLY);
-PMD_BIT_FUNC(mkold,	&= ~PMD_SECT_AF);
-PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING);
-PMD_BIT_FUNC(mkwrite,   &= ~PMD_SECT_RDONLY);
-PMD_BIT_FUNC(mkdirty,   |= PMD_SECT_DIRTY);
-PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
-PMD_BIT_FUNC(mknotpresent, &= ~PMD_TYPE_MASK);
+#define __HAVE_ARCH_PMD_WRITE
+#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 
 #define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
 
@@ -266,15 +266,6 @@ PMD_BIT_FUNC(mknotpresent, &= ~PMD_TYPE_MASK);
 
 #define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
-static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
-{
-	const pmdval_t mask = PMD_SECT_USER | PMD_SECT_PXN | PMD_SECT_UXN |
-			      PMD_SECT_RDONLY | PMD_SECT_PROT_NONE |
-			      PMD_SECT_VALID;
-	pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask);
-	return pmd;
-}
-
 #define set_pmd_at(mm, addr, pmdp, pmd)	set_pmd(pmdp, pmd)
 
 static inline int has_transparent_hugepage(void)
@@ -286,11 +277,9 @@ static inline int has_transparent_hugepage(void)
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot) \
-	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN)
 #define pgprot_writecombine(prot) \
-	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
-#define pgprot_dmacoherent(prot) \
-	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC))
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)
 #define __HAVE_PHYS_MEM_ACCESS_PROT
 struct file;
 extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
@@ -383,6 +372,11 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 	return pte;
 }
 
+static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
+{
+	return pte_pmd(pte_modify(pmd_pte(pmd), newprot));
+}
+
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
 

arch/arm64/include/asm/psci.h

@@ -14,6 +14,6 @@
 #ifndef __ASM_PSCI_H
 #define __ASM_PSCI_H
 
-int psci_init(void);
+void psci_init(void);
 
 #endif /* __ASM_PSCI_H */

arch/arm64/include/asm/ptrace.h

@@ -68,6 +68,7 @@
 
 /* Architecturally defined mapping between AArch32 and AArch64 registers */
 #define compat_usr(x)	regs[(x)]
+#define compat_fp	regs[11]
 #define compat_sp	regs[13]
 #define compat_lr	regs[14]
 #define compat_sp_hyp	regs[15]
@@ -132,7 +133,7 @@ struct pt_regs {
 	(!((regs)->pstate & PSR_F_BIT))
 
 #define user_stack_pointer(regs) \
-	((regs)->sp)
+	(!compat_user_mode(regs)) ? ((regs)->sp) : ((regs)->compat_sp)
 
 /*
  * Are the current registers suitable for user mode? (used to maintain
@@ -164,7 +165,7 @@ static inline int valid_user_regs(struct user_pt_regs *regs)
 	return 0;
 }
 
-#define instruction_pointer(regs)	(regs)->pc
+#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
 
 #ifdef CONFIG_SMP
 extern unsigned long profile_pc(struct pt_regs *regs);

arch/arm64/include/asm/tlb.h

@@ -19,115 +19,44 @@
 #ifndef __ASM_TLB_H
 #define __ASM_TLB_H
 
-#include <linux/pagemap.h>
-#include <linux/swap.h>
 
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-
-#define MMU_GATHER_BUNDLE	8
+#include <asm-generic/tlb.h>
 
 /*
- * TLB handling.  This allows us to remove pages from the page
- * tables, and efficiently handle the TLB issues.
- */
-struct mmu_gather {
-	struct mm_struct	*mm;
-	unsigned int		fullmm;
-	struct vm_area_struct	*vma;
-	unsigned long		start, end;
-	unsigned long		range_start;
-	unsigned long		range_end;
-	unsigned int		nr;
-	unsigned int		max;
-	struct page		**pages;
-	struct page		*local[MMU_GATHER_BUNDLE];
-};
-
-/*
- * This is unnecessarily complex.  There's three ways the TLB shootdown
- * code is used:
+ * There's three ways the TLB shootdown code is used:
  *  1. Unmapping a range of vmas.  See zap_page_range(), unmap_region().
  *     tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
- *     tlb->vma will be non-NULL.
  *  2. Unmapping all vmas.  See exit_mmap().
  *     tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
- *     tlb->vma will be non-NULL.  Additionally, page tables will be freed.
+ *     Page tables will be freed.
  *  3. Unmapping argument pages.  See shift_arg_pages().
  *     tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
- *     tlb->vma will be NULL.
  */
 static inline void tlb_flush(struct mmu_gather *tlb)
 {
-	if (tlb->fullmm || !tlb->vma)
+	if (tlb->fullmm) {
 		flush_tlb_mm(tlb->mm);
-	else if (tlb->range_end > 0) {
-		flush_tlb_range(tlb->vma, tlb->range_start, tlb->range_end);
-		tlb->range_start = TASK_SIZE;
-		tlb->range_end = 0;
+	} else if (tlb->end > 0) {
+		struct vm_area_struct vma = { .vm_mm = tlb->mm, };
+		flush_tlb_range(&vma, tlb->start, tlb->end);
+		tlb->start = TASK_SIZE;
+		tlb->end = 0;
 	}
 }
 
 static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
 {
 	if (!tlb->fullmm) {
-		if (addr < tlb->range_start)
-			tlb->range_start = addr;
-		if (addr + PAGE_SIZE > tlb->range_end)
-			tlb->range_end = addr + PAGE_SIZE;
+		tlb->start = min(tlb->start, addr);
+		tlb->end = max(tlb->end, addr + PAGE_SIZE);
 	}
 }
 
-static inline void __tlb_alloc_page(struct mmu_gather *tlb)
-{
-	unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
-
-	if (addr) {
-		tlb->pages = (void *)addr;
-		tlb->max = PAGE_SIZE / sizeof(struct page *);
-	}
-}
-
-static inline void tlb_flush_mmu(struct mmu_gather *tlb)
-{
-	tlb_flush(tlb);
-	free_pages_and_swap_cache(tlb->pages, tlb->nr);
-	tlb->nr = 0;
-	if (tlb->pages == tlb->local)
-		__tlb_alloc_page(tlb);
-}
-
-static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
-{
-	tlb->mm = mm;
-	tlb->fullmm = !(start | (end+1));
-	tlb->start = start;
-	tlb->end = end;
-	tlb->vma = NULL;
-	tlb->max = ARRAY_SIZE(tlb->local);
-	tlb->pages = tlb->local;
-	tlb->nr = 0;
-	__tlb_alloc_page(tlb);
-}
-
-static inline void
-tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
-{
-	tlb_flush_mmu(tlb);
-
-	/* keep the page table cache within bounds */
-	check_pgt_cache();
-
-	if (tlb->pages != tlb->local)
-		free_pages((unsigned long)tlb->pages, 0);
-}
-
 /*
  * Memorize the range for the TLB flush.
  */
-static inline void
-tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					  unsigned long addr)
 {
 	tlb_add_flush(tlb, addr);
 }
@@ -137,36 +66,22 @@ tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
  * case where we're doing a full MM flush.  When we're doing a munmap,
  * the vmas are adjusted to only cover the region to be torn down.
  */
-static inline void
-tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+static inline void tlb_start_vma(struct mmu_gather *tlb,
+				 struct vm_area_struct *vma)
 {
 	if (!tlb->fullmm) {
-		tlb->vma = vma;
-		tlb->range_start = TASK_SIZE;
-		tlb->range_end = 0;
+		tlb->start = TASK_SIZE;
+		tlb->end = 0;
 	}
 }
 
-static inline void
-tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+static inline void tlb_end_vma(struct mmu_gather *tlb,
+			       struct vm_area_struct *vma)
 {
 	if (!tlb->fullmm)
 		tlb_flush(tlb);
 }
 
-static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-	tlb->pages[tlb->nr++] = page;
-	VM_BUG_ON(tlb->nr > tlb->max);
-	return tlb->max - tlb->nr;
-}
-
-static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
-{
-	if (!__tlb_remove_page(tlb, page))
-		tlb_flush_mmu(tlb);
-}
-
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 				  unsigned long addr)
 {
@@ -184,16 +99,5 @@ static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
 }
 #endif
 
-#define pte_free_tlb(tlb, ptep, addr)	__pte_free_tlb(tlb, ptep, addr)
-#define pmd_free_tlb(tlb, pmdp, addr)	__pmd_free_tlb(tlb, pmdp, addr)
-#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
-
-#define tlb_migrate_finish(mm)		do { } while (0)
-
-static inline void
-tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp, unsigned long addr)
-{
-	tlb_add_flush(tlb, addr);
-}
 
 #endif

arch/arm64/include/asm/topology.h

@@ -0,0 +1,39 @@
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct cpu_topology {
+	int thread_id;
+	int core_id;
+	int cluster_id;
+	cpumask_t thread_sibling;
+	cpumask_t core_sibling;
+};
+
+extern struct cpu_topology cpu_topology[NR_CPUS];
+
+#define topology_physical_package_id(cpu)	(cpu_topology[cpu].cluster_id)
+#define topology_core_id(cpu)		(cpu_topology[cpu].core_id)
+#define topology_core_cpumask(cpu)	(&cpu_topology[cpu].core_sibling)
+#define topology_thread_cpumask(cpu)	(&cpu_topology[cpu].thread_sibling)
+
+#define mc_capable()	(cpu_topology[0].cluster_id != -1)
+#define smt_capable()	(cpu_topology[0].thread_id != -1)
+
+void init_cpu_topology(void);
+void store_cpu_topology(unsigned int cpuid);
+const struct cpumask *cpu_coregroup_mask(int cpu);
+
+#else
+
+static inline void init_cpu_topology(void) { }
+static inline void store_cpu_topology(unsigned int cpuid) { }
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */

arch/arm64/include/asm/uaccess.h

@@ -83,7 +83,7 @@ static inline void set_fs(mm_segment_t fs)
  * Returns 1 if the range is valid, 0 otherwise.
  *
  * This is equivalent to the following test:
- * (u65)addr + (u65)size < (u65)current->addr_limit
+ * (u65)addr + (u65)size <= current->addr_limit
  *
  * This needs 65-bit arithmetic.
  */
@@ -91,7 +91,7 @@ static inline void set_fs(mm_segment_t fs)
 ({									\
 	unsigned long flag, roksum;					\
 	__chk_user_ptr(addr);						\
-	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, cc"		\
+	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls"		\
 		: "=&r" (flag), "=&r" (roksum)				\
 		: "1" (addr), "Ir" (size),				\
 		  "r" (current_thread_info()->addr_limit)		\

arch/arm64/include/asm/unistd.h

@@ -14,6 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #ifdef CONFIG_COMPAT
+#define __ARCH_WANT_COMPAT_SYS_GETDENTS64
 #define __ARCH_WANT_COMPAT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
 #define __ARCH_WANT_SYS_PAUSE

arch/arm64/include/uapi/asm/Kbuild

@@ -9,6 +9,7 @@ header-y += byteorder.h
 header-y += fcntl.h
 header-y += hwcap.h
 header-y += kvm_para.h
+header-y += perf_regs.h
 header-y += param.h
 header-y += ptrace.h
 header-y += setup.h

arch/arm64/include/uapi/asm/perf_regs.h

@@ -0,0 +1,40 @@
+#ifndef _ASM_ARM64_PERF_REGS_H
+#define _ASM_ARM64_PERF_REGS_H
+
+enum perf_event_arm_regs {
+	PERF_REG_ARM64_X0,
+	PERF_REG_ARM64_X1,
+	PERF_REG_ARM64_X2,
+	PERF_REG_ARM64_X3,
+	PERF_REG_ARM64_X4,
+	PERF_REG_ARM64_X5,
+	PERF_REG_ARM64_X6,
+	PERF_REG_ARM64_X7,
+	PERF_REG_ARM64_X8,
+	PERF_REG_ARM64_X9,
+	PERF_REG_ARM64_X10,
+	PERF_REG_ARM64_X11,
+	PERF_REG_ARM64_X12,
+	PERF_REG_ARM64_X13,
+	PERF_REG_ARM64_X14,
+	PERF_REG_ARM64_X15,
+	PERF_REG_ARM64_X16,
+	PERF_REG_ARM64_X17,
+	PERF_REG_ARM64_X18,
+	PERF_REG_ARM64_X19,
+	PERF_REG_ARM64_X20,
+	PERF_REG_ARM64_X21,
+	PERF_REG_ARM64_X22,
+	PERF_REG_ARM64_X23,
+	PERF_REG_ARM64_X24,
+	PERF_REG_ARM64_X25,
+	PERF_REG_ARM64_X26,
+	PERF_REG_ARM64_X27,
+	PERF_REG_ARM64_X28,
+	PERF_REG_ARM64_X29,
+	PERF_REG_ARM64_LR,
+	PERF_REG_ARM64_SP,
+	PERF_REG_ARM64_PC,
+	PERF_REG_ARM64_MAX,
+};
+#endif /* _ASM_ARM64_PERF_REGS_H */

arch/arm64/kernel/Makefile

@@ -14,12 +14,14 @@ arm64-obj-y		:= cputable.o debug-monitors.o entry.o irq.o fpsimd.o	\
 arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 					   sys_compat.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
-arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o
+arm64-obj-$(CONFIG_SMP)			+= smp.o smp_spin_table.o topology.o
+arm64-obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
-arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
+arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 arm64-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND)	+= sleep.o suspend.o
 arm64-obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
+arm64-obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-y					+= $(arm64-obj-y) vdso/
 obj-m					+= $(arm64-obj-m)