mmc: sdhci: clear auto cmd setting bits for no data cmds

The auto cmd settings bits should be cleared before sending new commands
or we may receive command timeout error for normal commands due to wrongly
pre-sent auto cmd.

e.g. we receive CMD13 timeout error due to ACMD23 is wrongly enabled
by former data commands.

mmc2: new high speed DDR MMC card at address 0001
mmcblk1: mmc2:0001 SEM08G 7.39 GiB
mmcblk1boot0: mmc2:0001 SEM08G partition 1 2.00 MiB
mmcblk1boot1: mmc2:0001 SEM08G partition 2 2.00 MiB
mmcblk1rpmb: mmc2:0001 SEM08G partition 3 128 KiB
 mmcblk1: p1 p2 p3 p4 < p5 p6 p7 >
mmc2: Timeout waiting for hardware interrupt.
 mmcblk1boot1: unknown partition table
mmc2: Timeout waiting for hardware interrupt.
 mmcblk1boot0: unknown partition table

Signed-off-by: Dong Aisheng <b29396@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Dong Aisheng 2013-10-30 22:09:48 +08:00 committed by Chris Ball
parent 0e4b0743bb
commit 2b558c13df
1 changed files with 6 additions and 1 deletions

View File

@ -898,8 +898,13 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
u16 mode; u16 mode;
struct mmc_data *data = cmd->data; struct mmc_data *data = cmd->data;
if (data == NULL) if (data == NULL) {
/* clear Auto CMD settings for no data CMDs */
mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
return; return;
}
WARN_ON(!host->data); WARN_ON(!host->data);