ARM: OMAP2+: Remove unused legacy code for PRM

We are now booting all mach-omap2 in device tree only mode.
Any code that is only called in legacy boot mode where
of_have_populated_dt() is not set is safe to remove now.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2017-05-31 15:51:36 -07:00
parent 58a641c827
commit 2a26d31b1b
3 changed files with 10 additions and 75 deletions

View File

@ -690,6 +690,8 @@ static const struct of_device_id omap3_prm_dt_match_table[] = {
static int omap3xxx_prm_late_init(void)
{
struct device_node *np;
int irq_num;
int ret;
if (!(prm_features & PRM_HAS_IO_WAKEUP))
@ -702,16 +704,11 @@ static int omap3xxx_prm_late_init(void)
omap3_prcm_irq_setup.reconfigure_io_chain =
omap3430_pre_es3_1_reconfigure_io_chain;
if (of_have_populated_dt()) {
struct device_node *np;
int irq_num;
np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
if (np) {
irq_num = of_irq_get(np, 0);
if (irq_num >= 0)
omap3_prcm_irq_setup.irq = irq_num;
}
np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
if (np) {
irq_num = of_irq_get(np, 0);
if (irq_num >= 0)
omap3_prcm_irq_setup.irq = irq_num;
}
omap3xxx_prm_enable_io_wakeup();

View File

@ -336,27 +336,6 @@ static void omap44xx_prm_reconfigure_io_chain(void)
return;
}
/**
* omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
* Activates the I/O wakeup event latches and allows events logged by
* those latches to signal a wakeup event to the PRCM. For I/O wakeups
* to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
* omap44xx_prm_reconfigure_io_chain() must be called. No return value.
*/
static void __init omap44xx_prm_enable_io_wakeup(void)
{
s32 inst = omap4_prmst_get_prm_dev_inst();
if (inst == PRM_INSTANCE_UNKNOWN)
return;
omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
OMAP4430_GLOBAL_WUEN_MASK,
inst,
omap4_prcm_irq_setup.pm_ctrl);
}
/**
* omap44xx_prm_read_reset_sources - return the last SoC reset source
*
@ -689,8 +668,6 @@ struct pwrdm_ops omap4_pwrdm_operations = {
.pwrdm_has_voltdm = omap4_check_vcvp,
};
static int omap44xx_prm_late_init(void);
/*
* XXX document
*/
@ -698,7 +675,6 @@ static struct prm_ll_data omap44xx_prm_ll_data = {
.read_reset_sources = &omap44xx_prm_read_reset_sources,
.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
.late_init = &omap44xx_prm_late_init,
.assert_hardreset = omap4_prminst_assert_hardreset,
.deassert_hardreset = omap4_prminst_deassert_hardreset,
.is_hardreset_asserted = omap4_prminst_is_hardreset_asserted,
@ -735,41 +711,6 @@ int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
return prm_register(&omap44xx_prm_ll_data);
}
static int omap44xx_prm_late_init(void)
{
int irq_num;
if (!(prm_features & PRM_HAS_IO_WAKEUP))
return 0;
/* OMAP4+ is DT only now */
if (!of_have_populated_dt())
return 0;
irq_num = of_irq_get(prm_init_data->np, 0);
/*
* Already have OMAP4 IRQ num. For all other platforms, we need
* IRQ numbers from DT
*/
if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
if (irq_num == -EPROBE_DEFER)
return irq_num;
/* Have nothing to do */
return 0;
}
/* Once OMAP4 DT is filled as well */
if (irq_num >= 0) {
omap4_prcm_irq_setup.irq = irq_num;
omap4_prcm_irq_setup.xlate_irq = NULL;
}
omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
}
static void __exit omap44xx_prm_exit(void)
{
prm_unregister(&omap44xx_prm_ll_data);

View File

@ -267,10 +267,9 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
{
int nr_regs;
u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
int offset, i;
int offset, i, irq;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
unsigned int irq;
if (!irq_setup)
return -EINVAL;
@ -344,10 +343,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
prcm_irq_chips[i] = gc;
}
if (of_have_populated_dt()) {
int irq = omap_prcm_event_to_irq("io");
omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
}
irq = omap_prcm_event_to_irq("io");
omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain);
return 0;