hwmon/pc87360 separate alarm files: define some constants
Bring hwmon/pc87360 into agreement with Documentation/hwmon/sysfs-interface. Patchset adds separate limit alarms for voltages and temps, it also adds temp[123]_fault files. On my Soekris, temps 1,2 are unused/unconnected, so temp[123]_fault = 1,1,0 respectively. This agrees with /usr/bin/sensors, which has always shown them as OPEN. Temps 4,5,6 are thermistor based, and dont have a fault bit in their status register. This patch: 2 different kinds of constants added: - CHAN_ALM_* constants for (later) vin, temp alarm callbacks. - CHAN_* conversion constants, used in _init_device, partly for RW1C bits Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
parent
4d235ba6c2
commit
28f74e7177
|
@ -489,6 +489,11 @@ static struct sensor_device_attribute in_max[] = {
|
|||
SENSOR_ATTR(in10_max, S_IWUSR | S_IRUGO, show_in_max, set_in_max, 10),
|
||||
};
|
||||
|
||||
/* (temp & vin) channel status register alarm bits (pdf sec.11.5.12) */
|
||||
#define CHAN_ALM_MIN 0x02 /* min limit crossed */
|
||||
#define CHAN_ALM_MAX 0x04 /* max limit exceeded */
|
||||
#define TEMP_ALM_CRIT 0x08 /* temp crit exceeded (temp only) */
|
||||
|
||||
#define VIN_UNIT_ATTRS(X) \
|
||||
&in_input[X].dev_attr.attr, \
|
||||
&in_status[X].dev_attr.attr, \
|
||||
|
@ -1131,6 +1136,12 @@ static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank,
|
|||
mutex_unlock(&(data->lock));
|
||||
}
|
||||
|
||||
/* (temp & vin) channel conversion status register flags (pdf sec.11.5.12) */
|
||||
#define CHAN_CNVRTD 0x80 /* new data ready */
|
||||
#define CHAN_ENA 0x01 /* enabled channel (temp or vin) */
|
||||
#define CHAN_ALM_ENA 0x10 /* propagate to alarms-reg ?? (chk val!) */
|
||||
#define CHAN_READY (CHAN_ENA|CHAN_CNVRTD) /* sample ready mask */
|
||||
|
||||
static void pc87360_init_device(struct platform_device *pdev,
|
||||
int use_thermistors)
|
||||
{
|
||||
|
@ -1156,7 +1167,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
/* Forcibly enable voltage channel */
|
||||
reg = pc87360_read_value(data, LD_IN, i,
|
||||
PC87365_REG_IN_STATUS);
|
||||
if (!(reg & 0x01)) {
|
||||
if (!(reg & CHAN_ENA)) {
|
||||
dev_dbg(&pdev->dev, "Forcibly "
|
||||
"enabling in%d\n", i);
|
||||
pc87360_write_value(data, LD_IN, i,
|
||||
|
@ -1171,7 +1182,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
for (i = 11; i < data->innr; i++) {
|
||||
reg = pc87360_read_value(data, LD_IN, i,
|
||||
PC87365_REG_TEMP_STATUS);
|
||||
use_thermistors = use_thermistors || (reg & 0x01);
|
||||
use_thermistors = use_thermistors || (reg & CHAN_ENA);
|
||||
}
|
||||
|
||||
i = use_thermistors ? 2 : 0;
|
||||
|
@ -1180,7 +1191,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
/* Forcibly enable temperature channel */
|
||||
reg = pc87360_read_value(data, LD_TEMP, i,
|
||||
PC87365_REG_TEMP_STATUS);
|
||||
if (!(reg & 0x01)) {
|
||||
if (!(reg & CHAN_ENA)) {
|
||||
dev_dbg(&pdev->dev, "Forcibly "
|
||||
"enabling temp%d\n", i+1);
|
||||
pc87360_write_value(data, LD_TEMP, i,
|
||||
|
@ -1197,7 +1208,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
diodes */
|
||||
reg = pc87360_read_value(data, LD_TEMP,
|
||||
(i-11)/2, PC87365_REG_TEMP_STATUS);
|
||||
if (reg & 0x01) {
|
||||
if (reg & CHAN_ENA) {
|
||||
dev_dbg(&pdev->dev, "Skipping "
|
||||
"temp%d, pin already in use "
|
||||
"by temp%d\n", i-7, (i-11)/2);
|
||||
|
@ -1207,7 +1218,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
/* Forcibly enable thermistor channel */
|
||||
reg = pc87360_read_value(data, LD_IN, i,
|
||||
PC87365_REG_IN_STATUS);
|
||||
if (!(reg & 0x01)) {
|
||||
if (!(reg & CHAN_ENA)) {
|
||||
dev_dbg(&pdev->dev, "Forcibly "
|
||||
"enabling temp%d\n", i-7);
|
||||
pc87360_write_value(data, LD_IN, i,
|
||||
|
@ -1221,7 +1232,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
if (data->innr) {
|
||||
reg = pc87360_read_value(data, LD_IN, NO_BANK,
|
||||
PC87365_REG_IN_CONFIG);
|
||||
if (reg & 0x01) {
|
||||
if (reg & CHAN_ENA) {
|
||||
dev_dbg(&pdev->dev, "Forcibly "
|
||||
"enabling monitoring (VLM)\n");
|
||||
pc87360_write_value(data, LD_IN, NO_BANK,
|
||||
|
@ -1233,7 +1244,7 @@ static void pc87360_init_device(struct platform_device *pdev,
|
|||
if (data->tempnr) {
|
||||
reg = pc87360_read_value(data, LD_TEMP, NO_BANK,
|
||||
PC87365_REG_TEMP_CONFIG);
|
||||
if (reg & 0x01) {
|
||||
if (reg & CHAN_ENA) {
|
||||
dev_dbg(&pdev->dev, "Forcibly enabling "
|
||||
"monitoring (TMS)\n");
|
||||
pc87360_write_value(data, LD_TEMP, NO_BANK,
|
||||
|
@ -1336,11 +1347,11 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
|
|||
pc87360_write_value(data, LD_IN, i,
|
||||
PC87365_REG_IN_STATUS,
|
||||
data->in_status[i]);
|
||||
if ((data->in_status[i] & 0x81) == 0x81) {
|
||||
if ((data->in_status[i] & CHAN_READY) == CHAN_READY) {
|
||||
data->in[i] = pc87360_read_value(data, LD_IN,
|
||||
i, PC87365_REG_IN);
|
||||
}
|
||||
if (data->in_status[i] & 0x01) {
|
||||
if (data->in_status[i] & CHAN_ENA) {
|
||||
data->in_min[i] = pc87360_read_value(data,
|
||||
LD_IN, i,
|
||||
PC87365_REG_IN_MIN);
|
||||
|
@ -1373,12 +1384,12 @@ static struct pc87360_data *pc87360_update_device(struct device *dev)
|
|||
pc87360_write_value(data, LD_TEMP, i,
|
||||
PC87365_REG_TEMP_STATUS,
|
||||
data->temp_status[i]);
|
||||
if ((data->temp_status[i] & 0x81) == 0x81) {
|
||||
if ((data->temp_status[i] & CHAN_READY) == CHAN_READY) {
|
||||
data->temp[i] = pc87360_read_value(data,
|
||||
LD_TEMP, i,
|
||||
PC87365_REG_TEMP);
|
||||
}
|
||||
if (data->temp_status[i] & 0x01) {
|
||||
if (data->temp_status[i] & CHAN_ENA) {
|
||||
data->temp_min[i] = pc87360_read_value(data,
|
||||
LD_TEMP, i,
|
||||
PC87365_REG_TEMP_MIN);
|
||||
|
|
Loading…
Reference in New Issue