pktgen: add sample script pktgen_sample02_multiqueue.sh
Add the pktgen samples script pktgen_sample02_multiqueue.sh that demonstrates generating packets on multiqueue NICs. Specifically notice the options "-t" that specifies how many kernel threads to activate. Also notice the flag QUEUE_MAP_CPU, which cause the SKB TX queue to be mapped to the CPU running the kernel thread. For best scalability people are also encourage to map NIC IRQ /proc/irq/*/smp_affinity to CPU number. Usage example with "-t" 4 threads and help: ./pktgen_sample02_multiqueue.sh -i eth4 -m 00:1B:21:3C:9D:F8 -t 4 Usage: ./pktgen_sample02_multiqueue.sh [-vx] -i ethX -i : ($DEV) output interface/device (required) -s : ($PKT_SIZE) packet size -d : ($DEST_IP) destination IP -m : ($DST_MAC) destination MAC-addr -t : ($THREADS) threads to start -c : ($SKB_CLONE) SKB clones send before alloc new SKB -b : ($BURST) HW level bursting of SKBs -v : ($VERBOSE) verbose -x : ($DEBUG) debug Removing pktgen.conf-2-1 and pktgen.conf-2-2 as these examples should be covered now. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Jesper Dangaard Brouer
David S. Miller
parent
6f09479758
commit
282fb58947
|
|
@ -244,8 +244,6 @@ pktgen_sampleXX scripts and modify them to fit your own needs.
|
||||||
The old scripts:
|
The old scripts:
|
||||||
|
|
||||||
pktgen.conf-1-2 # 1 CPU 2 dev
|
pktgen.conf-1-2 # 1 CPU 2 dev
|
||||||
pktgen.conf-2-1 # 2 CPU's 1 dev
|
|
||||||
pktgen.conf-2-2 # 2 CPU's 2 dev
|
|
||||||
pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS
|
pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS
|
||||||
pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
|
pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
|
||||||
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS
|
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS
|
||||||
|
|
|
||||||
|
|
@ -1,66 +0,0 @@
|
||||||
#!/bin/bash
|
|
||||||
|
|
||||||
#modprobe pktgen
|
|
||||||
|
|
||||||
|
|
||||||
function pgset() {
|
|
||||||
local result
|
|
||||||
|
|
||||||
echo $1 > $PGDEV
|
|
||||||
|
|
||||||
result=`cat $PGDEV | fgrep "Result: OK:"`
|
|
||||||
if [ "$result" = "" ]; then
|
|
||||||
cat $PGDEV | fgrep Result:
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
# Config Start Here -----------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
# thread config
|
|
||||||
# Each CPU has its own thread. Two CPU example. We add eth1 to the first
|
|
||||||
# and leave the second idle.
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/kpktgend_0
|
|
||||||
echo "Removing all devices"
|
|
||||||
pgset "rem_device_all"
|
|
||||||
echo "Adding eth1"
|
|
||||||
pgset "add_device eth1"
|
|
||||||
|
|
||||||
# We need to remove old config since we dont use this thread. We can only
|
|
||||||
# one NIC on one CPU due to affinity reasons.
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/kpktgend_1
|
|
||||||
echo "Removing all devices"
|
|
||||||
pgset "rem_device_all"
|
|
||||||
|
|
||||||
# device config
|
|
||||||
# delay 0 means maximum speed.
|
|
||||||
|
|
||||||
CLONE_SKB="clone_skb 1000000"
|
|
||||||
# NIC adds 4 bytes CRC
|
|
||||||
PKT_SIZE="pkt_size 60"
|
|
||||||
|
|
||||||
# COUNT 0 means forever
|
|
||||||
#COUNT="count 0"
|
|
||||||
COUNT="count 10000000"
|
|
||||||
DELAY="delay 0"
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/eth1
|
|
||||||
echo "Configuring $PGDEV"
|
|
||||||
pgset "$COUNT"
|
|
||||||
pgset "$CLONE_SKB"
|
|
||||||
pgset "$PKT_SIZE"
|
|
||||||
pgset "$DELAY"
|
|
||||||
pgset "dst 10.10.11.2"
|
|
||||||
pgset "dst_mac 00:04:23:08:91:dc"
|
|
||||||
|
|
||||||
|
|
||||||
# Time to run
|
|
||||||
PGDEV=/proc/net/pktgen/pgctrl
|
|
||||||
|
|
||||||
echo "Running... ctrl^C to stop"
|
|
||||||
trap true INT
|
|
||||||
pgset "start"
|
|
||||||
echo "Done"
|
|
||||||
cat /proc/net/pktgen/eth1
|
|
||||||
|
|
@ -1,73 +0,0 @@
|
||||||
#!/bin/bash
|
|
||||||
|
|
||||||
#modprobe pktgen
|
|
||||||
|
|
||||||
|
|
||||||
function pgset() {
|
|
||||||
local result
|
|
||||||
|
|
||||||
echo $1 > $PGDEV
|
|
||||||
|
|
||||||
result=`cat $PGDEV | fgrep "Result: OK:"`
|
|
||||||
if [ "$result" = "" ]; then
|
|
||||||
cat $PGDEV | fgrep Result:
|
|
||||||
fi
|
|
||||||
}
|
|
||||||
|
|
||||||
# Config Start Here -----------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
# thread config
|
|
||||||
# Each CPU has its own thread. Two CPU example. We add eth1, eth2 respectively.
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/kpktgend_0
|
|
||||||
echo "Removing all devices"
|
|
||||||
pgset "rem_device_all"
|
|
||||||
echo "Adding eth1"
|
|
||||||
pgset "add_device eth1"
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/kpktgend_1
|
|
||||||
echo "Removing all devices"
|
|
||||||
pgset "rem_device_all"
|
|
||||||
echo "Adding eth2"
|
|
||||||
pgset "add_device eth2"
|
|
||||||
|
|
||||||
|
|
||||||
# device config
|
|
||||||
# delay 0 means maximum speed.
|
|
||||||
|
|
||||||
CLONE_SKB="clone_skb 1000000"
|
|
||||||
# NIC adds 4 bytes CRC
|
|
||||||
PKT_SIZE="pkt_size 60"
|
|
||||||
|
|
||||||
# COUNT 0 means forever
|
|
||||||
#COUNT="count 0"
|
|
||||||
COUNT="count 10000000"
|
|
||||||
DELAY="delay 0"
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/eth1
|
|
||||||
echo "Configuring $PGDEV"
|
|
||||||
pgset "$COUNT"
|
|
||||||
pgset "$CLONE_SKB"
|
|
||||||
pgset "$PKT_SIZE"
|
|
||||||
pgset "$DELAY"
|
|
||||||
pgset "dst 10.10.11.2"
|
|
||||||
pgset "dst_mac 00:04:23:08:91:dc"
|
|
||||||
|
|
||||||
PGDEV=/proc/net/pktgen/eth2
|
|
||||||
echo "Configuring $PGDEV"
|
|
||||||
pgset "$COUNT"
|
|
||||||
pgset "$CLONE_SKB"
|
|
||||||
pgset "$PKT_SIZE"
|
|
||||||
pgset "$DELAY"
|
|
||||||
pgset "dst 192.168.2.2"
|
|
||||||
pgset "dst_mac 00:04:23:08:91:de"
|
|
||||||
|
|
||||||
# Time to run
|
|
||||||
PGDEV=/proc/net/pktgen/pgctrl
|
|
||||||
|
|
||||||
echo "Running... ctrl^C to stop"
|
|
||||||
trap true INT
|
|
||||||
pgset "start"
|
|
||||||
echo "Done"
|
|
||||||
cat /proc/net/pktgen/eth1 /proc/net/pktgen/eth2
|
|
||||||
|
|
@ -0,0 +1,75 @@
|
||||||
|
#!/bin/bash
|
||||||
|
#
|
||||||
|
# Multiqueue: Using pktgen threads for sending on multiple CPUs
|
||||||
|
# * adding devices to kernel threads
|
||||||
|
# * notice the naming scheme for keeping device names unique
|
||||||
|
# * nameing scheme: dev@thread_number
|
||||||
|
# * flow variation via random UDP source port
|
||||||
|
#
|
||||||
|
basedir=`dirname $0`
|
||||||
|
source ${basedir}/functions.sh
|
||||||
|
root_check_run_with_sudo "$@"
|
||||||
|
#
|
||||||
|
# Required param: -i dev in $DEV
|
||||||
|
source ${basedir}/parameters.sh
|
||||||
|
|
||||||
|
# Base Config
|
||||||
|
DELAY="0" # Zero means max speed
|
||||||
|
COUNT="100000" # Zero means indefinitely
|
||||||
|
[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
|
||||||
|
|
||||||
|
# Flow variation random source port between min and max
|
||||||
|
UDP_MIN=9
|
||||||
|
UDP_MAX=109
|
||||||
|
|
||||||
|
# (example of setting default params in your script)
|
||||||
|
[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
|
||||||
|
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
|
||||||
|
|
||||||
|
# General cleanup everything since last run
|
||||||
|
pg_ctrl "reset"
|
||||||
|
|
||||||
|
# Threads are specified with parameter -t value in $THREADS
|
||||||
|
for ((thread = 0; thread < $THREADS; thread++)); do
|
||||||
|
# The device name is extended with @name, using thread number to
|
||||||
|
# make then unique, but any name will do.
|
||||||
|
dev=${DEV}@${thread}
|
||||||
|
|
||||||
|
# Add remove all other devices and add_device $dev to thread
|
||||||
|
pg_thread $thread "rem_device_all"
|
||||||
|
pg_thread $thread "add_device" $dev
|
||||||
|
|
||||||
|
# Notice config queue to map to cpu (mirrors smp_processor_id())
|
||||||
|
# It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number
|
||||||
|
pg_set $dev "flag QUEUE_MAP_CPU"
|
||||||
|
|
||||||
|
# Base config of dev
|
||||||
|
pg_set $dev "count $COUNT"
|
||||||
|
pg_set $dev "clone_skb $CLONE_SKB"
|
||||||
|
pg_set $dev "pkt_size $PKT_SIZE"
|
||||||
|
pg_set $dev "delay $DELAY"
|
||||||
|
|
||||||
|
# Flag example disabling timestamping
|
||||||
|
pg_set $dev "flag NO_TIMESTAMP"
|
||||||
|
|
||||||
|
# Destination
|
||||||
|
pg_set $dev "dst_mac $DST_MAC"
|
||||||
|
pg_set $dev "dst $DEST_IP"
|
||||||
|
|
||||||
|
# Setup random UDP port src range
|
||||||
|
pg_set $dev "flag UDPSRC_RND"
|
||||||
|
pg_set $dev "udp_src_min $UDP_MIN"
|
||||||
|
pg_set $dev "udp_src_max $UDP_MAX"
|
||||||
|
done
|
||||||
|
|
||||||
|
# start_run
|
||||||
|
echo "Running... ctrl^C to stop" >&2
|
||||||
|
pg_ctrl "start"
|
||||||
|
echo "Done" >&2
|
||||||
|
|
||||||
|
# Print results
|
||||||
|
for ((thread = 0; thread < $THREADS; thread++)); do
|
||||||
|
dev=${DEV}@${thread}
|
||||||
|
echo "Device: $dev"
|
||||||
|
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
|
||||||
|
done
|
||||||
Loading…
Reference in New Issue