regulator: aw37503: add regulator driver for Awinic AW37503
Add regulator driver for the device Awinic AW37503 which is single inductor - dual output power supply device. AW37503 device is designed to support general positive/negative driven applications like TFT display panels. AW37503 regulator driver supports to enable/disable and set voltage on its output. Signed-off-by: Alec Li <like@awinic.com> Link: https://lore.kernel.org/r/20230821035355.1269976-2-like@awinic.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Alec Li
Mark Brown
parent
1c6350f2d3
commit
2796a01cdf
|
|
@ -178,6 +178,14 @@ config REGULATOR_ATC260X
|
|||
ATC260x PMICs. This will enable support for all the software
|
||||
controllable DCDC/LDO regulators.
|
||||
|
||||
config REGULATOR_AW37503
|
||||
tristate "Awinic AW37503 Dual Output Power regulators"
|
||||
depends on I2C && GPIOLIB
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports AW37503 single inductor - dual output
|
||||
power supply specifically designed for display panels.
|
||||
|
||||
config REGULATOR_AXP20X
|
||||
tristate "X-POWERS AXP20X PMIC Regulators"
|
||||
depends on MFD_AXP20X
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AW37503) += aw37503-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,240 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
//
|
||||
// AWINIC AW37503 Regulator Driver
|
||||
//
|
||||
// Copyright (C) 2023 awinic. All Rights Reserved
|
||||
//
|
||||
// Author: <like@awinic.com>
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
#define AW37503_REG_VPOS 0x00
|
||||
#define AW37503_REG_VNEG 0x01
|
||||
#define AW37503_REG_APPS 0x03
|
||||
#define AW37503_REG_CONTROL 0x04
|
||||
#define AW37503_REG_WPRTEN 0x21
|
||||
|
||||
#define AW37503_VOUT_MASK 0x1F
|
||||
#define AW37503_VOUT_N_VOLTAGE 0x15
|
||||
#define AW37503_VOUT_VMIN 4000000
|
||||
#define AW37503_VOUT_VMAX 6000000
|
||||
#define AW37503_VOUT_STEP 100000
|
||||
|
||||
#define AW37503_REG_APPS_DIS_VPOS BIT(1)
|
||||
#define AW37503_REG_APPS_DIS_VNEG BIT(0)
|
||||
|
||||
#define AW37503_REGULATOR_ID_VPOS 0
|
||||
#define AW37503_REGULATOR_ID_VNEG 1
|
||||
#define AW37503_MAX_REGULATORS 2
|
||||
|
||||
struct aw37503_reg_pdata {
|
||||
struct gpio_desc *en_gpiod;
|
||||
int ena_gpio_state;
|
||||
};
|
||||
|
||||
struct aw37503_regulator {
|
||||
struct device *dev;
|
||||
struct aw37503_reg_pdata reg_pdata[AW37503_MAX_REGULATORS];
|
||||
};
|
||||
|
||||
static int aw37503_regulator_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct aw37503_regulator *chip = rdev_get_drvdata(rdev);
|
||||
int id = rdev_get_id(rdev);
|
||||
struct aw37503_reg_pdata *rpdata = &chip->reg_pdata[id];
|
||||
int ret;
|
||||
|
||||
if (!IS_ERR(rpdata->en_gpiod)) {
|
||||
gpiod_set_value_cansleep(rpdata->en_gpiod, 1);
|
||||
rpdata->ena_gpio_state = 1;
|
||||
}
|
||||
|
||||
/* Hardware automatically enable discharge bit in enable */
|
||||
if (rdev->constraints->active_discharge ==
|
||||
REGULATOR_ACTIVE_DISCHARGE_DISABLE) {
|
||||
ret = regulator_set_active_discharge_regmap(rdev, false);
|
||||
if (ret < 0) {
|
||||
dev_err(chip->dev, "Failed to disable active discharge: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int aw37503_regulator_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct aw37503_regulator *chip = rdev_get_drvdata(rdev);
|
||||
int id = rdev_get_id(rdev);
|
||||
struct aw37503_reg_pdata *rpdata = &chip->reg_pdata[id];
|
||||
|
||||
if (!IS_ERR(rpdata->en_gpiod)) {
|
||||
gpiod_set_value_cansleep(rpdata->en_gpiod, 0);
|
||||
rpdata->ena_gpio_state = 0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int aw37503_regulator_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct aw37503_regulator *chip = rdev_get_drvdata(rdev);
|
||||
int id = rdev_get_id(rdev);
|
||||
struct aw37503_reg_pdata *rpdata = &chip->reg_pdata[id];
|
||||
|
||||
if (!IS_ERR(rpdata->en_gpiod))
|
||||
return rpdata->ena_gpio_state;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static const struct regulator_ops aw37503_regulator_ops = {
|
||||
.enable = aw37503_regulator_enable,
|
||||
.disable = aw37503_regulator_disable,
|
||||
.is_enabled = aw37503_regulator_is_enabled,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_active_discharge = regulator_set_active_discharge_regmap,
|
||||
};
|
||||
|
||||
static int aw37503_of_parse_cb(struct device_node *np,
|
||||
const struct regulator_desc *desc,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
struct aw37503_regulator *chip = config->driver_data;
|
||||
struct aw37503_reg_pdata *rpdata = &chip->reg_pdata[desc->id];
|
||||
int ret;
|
||||
|
||||
rpdata->en_gpiod = devm_fwnode_gpiod_get(chip->dev, of_fwnode_handle(np),
|
||||
"enable", GPIOD_OUT_LOW,
|
||||
"enable");
|
||||
|
||||
if (IS_ERR(rpdata->en_gpiod)) {
|
||||
ret = PTR_ERR(rpdata->en_gpiod);
|
||||
|
||||
/* Ignore the error other than probe defer */
|
||||
if (ret == -EPROBE_DEFER)
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define AW37503_REGULATOR_DESC(_id, _name) \
|
||||
[AW37503_REGULATOR_ID_##_id] = { \
|
||||
.name = "aw37503-"#_name, \
|
||||
.supply_name = "vin", \
|
||||
.id = AW37503_REGULATOR_ID_##_id, \
|
||||
.of_match = of_match_ptr(#_name), \
|
||||
.of_parse_cb = aw37503_of_parse_cb, \
|
||||
.ops = &aw37503_regulator_ops, \
|
||||
.n_voltages = AW37503_VOUT_N_VOLTAGE, \
|
||||
.min_uV = AW37503_VOUT_VMIN, \
|
||||
.uV_step = AW37503_VOUT_STEP, \
|
||||
.enable_time = 500, \
|
||||
.vsel_mask = AW37503_VOUT_MASK, \
|
||||
.vsel_reg = AW37503_REG_##_id, \
|
||||
.active_discharge_off = 0, \
|
||||
.active_discharge_on = AW37503_REG_APPS_DIS_##_id, \
|
||||
.active_discharge_mask = AW37503_REG_APPS_DIS_##_id, \
|
||||
.active_discharge_reg = AW37503_REG_APPS, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.owner = THIS_MODULE, \
|
||||
}
|
||||
|
||||
static const struct regulator_desc aw_regs_desc[AW37503_MAX_REGULATORS] = {
|
||||
AW37503_REGULATOR_DESC(VPOS, outp),
|
||||
AW37503_REGULATOR_DESC(VNEG, outn),
|
||||
};
|
||||
|
||||
static const struct regmap_range aw37503_no_reg_ranges[] = {
|
||||
regmap_reg_range(AW37503_REG_CONTROL + 1,
|
||||
AW37503_REG_WPRTEN - 1),
|
||||
};
|
||||
|
||||
static const struct regmap_access_table aw37503_no_reg_table = {
|
||||
.no_ranges = aw37503_no_reg_ranges,
|
||||
.n_no_ranges = ARRAY_SIZE(aw37503_no_reg_ranges),
|
||||
};
|
||||
|
||||
static const struct regmap_config aw37503_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = AW37503_REG_WPRTEN,
|
||||
.rd_table = &aw37503_no_reg_table,
|
||||
.wr_table = &aw37503_no_reg_table,
|
||||
};
|
||||
|
||||
static int aw37503_probe(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct aw37503_regulator *chip;
|
||||
struct regulator_dev *rdev;
|
||||
struct regmap *regmap;
|
||||
struct regulator_config config = { };
|
||||
int id;
|
||||
|
||||
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
regmap = devm_regmap_init_i2c(client, &aw37503_regmap_config);
|
||||
if (IS_ERR(regmap))
|
||||
return dev_err_probe(dev, PTR_ERR(regmap),
|
||||
"Failed to init regmap\n");
|
||||
|
||||
i2c_set_clientdata(client, chip);
|
||||
chip->dev = dev;
|
||||
|
||||
config.regmap = regmap;
|
||||
config.dev = dev;
|
||||
config.driver_data = chip;
|
||||
|
||||
for (id = 0; id < AW37503_MAX_REGULATORS; ++id) {
|
||||
rdev = devm_regulator_register(dev, &aw_regs_desc[id],
|
||||
&config);
|
||||
if (IS_ERR(rdev))
|
||||
return dev_err_probe(dev, PTR_ERR(rdev),
|
||||
"Failed to register regulator %s\n",
|
||||
aw_regs_desc[id].name);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id aw37503_id[] = {
|
||||
{.name = "aw37503",},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, aw37503_id);
|
||||
|
||||
static const struct of_device_id aw37503_of_match[] = {
|
||||
{.compatible = "awinic,aw37503",},
|
||||
{ /* Sentinel */ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(of, aw37503_of_match);
|
||||
|
||||
static struct i2c_driver aw37503_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "aw37503",
|
||||
.of_match_table = aw37503_of_match,
|
||||
},
|
||||
.probe_new = aw37503_probe,
|
||||
.id_table = aw37503_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(aw37503_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("aw37503 regulator driver");
|
||||
MODULE_AUTHOR("Alec Li <like@awinic.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue