UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Staging: quatech_usb2: vendor implementation of set_termios method 

This patch imports the implementation of the set_termios method from the
vendor driver into the staging driver. The common terminal setting
changes should be supported.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Richard Ash 2009-08-20 11:24:39 +01:00 committed by Greg Kroah-Hartman
parent 2feb633d65
commit 2715dd6a93
1 changed files with 263 additions and 67 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

330
drivers/staging/quatech_usb2/quatech_usb2.c
View File

@ -52,12 +52,12 @@ static int debug;
#define QT_OPEN_CLOSE_CHANNEL 0xca
/*#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
#define QT_SET_ATF 0xcd*/
#define QT2_GET_SET_REGISTER 0xc0
#define QT_GET_SET_UART 0xc1
/*#define QT_HW_FLOW_CONTROL_MASK 0xc5
#define QT_SW_FLOW_CONTROL_MASK 0xc6
#define QT_SW_FLOW_CONTROL_DISABLE 0xc7
#define QT_BREAK_CONTROL 0xc8
#define QT2_GET_SET_REGISTER 0xc0
#define QT2_GET_SET_UART 0xc1
#define QT2_HW_FLOW_CONTROL_MASK 0xc5
#define QT2_SW_FLOW_CONTROL_MASK 0xc6
#define QT2_SW_FLOW_CONTROL_DISABLE 0xc7
/*#define QT_BREAK_CONTROL 0xc8
#define QT_STOP_RECEIVE 0xe0*/
#define QT2_FLUSH_DEVICE 0xc4
#define QT_GET_SET_QMCR 0xe1
@ -66,34 +66,35 @@ static int debug;
#define QT2_FLUSH_RX 0x00
#define QT2_FLUSH_TX 0x01
/* port setting constants */
#define SERIAL_MCR_DTR 0x01
#define SERIAL_MCR_RTS 0x02
#define SERIAL_MCR_LOOP 0x10
/* port setting constants, used to set up serial port speeds, flow
* control and so on */
#define QT2_SERIAL_MCR_DTR 0x01
#define QT2_SERIAL_MCR_RTS 0x02
#define QT2_SERIAL_MCR_LOOP 0x10
#define SERIAL_MSR_CTS 0x10
#define SERIAL_MSR_CD 0x80
#define SERIAL_MSR_RI 0x40
#define SERIAL_MSR_DSR 0x20
#define SERIAL_MSR_MASK 0xf0
#define QT2_SERIAL_MSR_CTS 0x10
#define QT2_SERIAL_MSR_CD 0x80
#define QT2_SERIAL_MSR_RI 0x40
#define QT2_SERIAL_MSR_DSR 0x20
#define QT2_SERIAL_MSR_MASK 0xf0
#define SERIAL_8_DATA 0x03
#define SERIAL_7_DATA 0x02
#define SERIAL_6_DATA 0x01
#define SERIAL_5_DATA 0x00
#define QT2_SERIAL_8_DATA 0x03
#define QT2_SERIAL_7_DATA 0x02
#define QT2_SERIAL_6_DATA 0x01
#define QT2_SERIAL_5_DATA 0x00
#define SERIAL_ODD_PARITY 0X08
#define SERIAL_EVEN_PARITY 0X18
#define SERIAL_TWO_STOPB 0x04
#define SERIAL_ONE_STOPB 0x00
#define QT2_SERIAL_ODD_PARITY 0X08
#define QT2_SERIAL_EVEN_PARITY 0X18
#define QT2_SERIAL_TWO_STOPB 0x04
#define QT2_SERIAL_ONE_STOPB 0x00
#define MAX_BAUD_RATE 921600
#define MAX_BAUD_REMAINDER 4608
#define QT2_MAX_BAUD_RATE 921600
#define QT2_MAX_BAUD_REMAINDER 4608
#define SERIAL_LSR_OE 0x02
#define SERIAL_LSR_PE 0x04
#define SERIAL_LSR_FE 0x08
#define SERIAL_LSR_BI 0x10
#define QT2_SERIAL_LSR_OE 0x02
#define QT2_SERIAL_LSR_PE 0x04
#define QT2_SERIAL_LSR_FE 0x08
#define QT2_SERIAL_LSR_BI 0x10
/* value of Line Status Register when UART has completed
* emptying data out on the line */
@ -268,11 +269,18 @@ static int qt2_box_set_register(struct usb_serial *serial,
unsigned short Value);
static int qt2_box_flush(struct usb_serial *serial, unsigned char uart_number,
unsigned short rcv_or_xmit);
static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
unsigned short default_divisor, unsigned char default_LCR);
/*static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
static int qt2_tiocmget(struct tty_struct *tty, struct file *file);
static int qt2_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
unsigned int set, unsigned int clear);*/
static int qt2_boxsethw_flowctl(struct usb_serial *serial,
unsigned int UartNumber, bool bSet);
static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
unsigned char stop_char, unsigned char start_char);
static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber);
/* implementation functions, roughly in order of use, are here */
static int qt2_calc_num_ports(struct usb_serial *serial)
@ -452,7 +460,7 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
struct quatech2_dev *dev_extra; /* extra data for the device */
struct qt2_status_data ChannelData;
unsigned short default_divisor = QU2BOXSPD9600;
unsigned char default_LCR = SERIAL_8_DATA;
unsigned char default_LCR = QT2_SERIAL_8_DATA;
int status;
int result;
@ -495,11 +503,11 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
return status;
}
port_extra->shadowLSR = ChannelData.line_status &
(SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
SERIAL_LSR_BI);
(QT2_SERIAL_LSR_OE | QT2_SERIAL_LSR_PE |
QT2_SERIAL_LSR_FE | QT2_SERIAL_LSR_BI);
port_extra->shadowMSR = ChannelData.modem_status &
(SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI |
SERIAL_MSR_CD);
(QT2_SERIAL_MSR_CTS | QT2_SERIAL_MSR_DSR |
QT2_SERIAL_MSR_RI | QT2_SERIAL_MSR_CD);
/* port_extra->fifo_empty_flag = true;*/
dbg("qt2_openboxchannel on channel %d completed.",
@ -884,19 +892,19 @@ static int qt2_ioctl(struct tty_struct *tty, struct file *file,
switch (cmd) {
case TIOCMBIS:
if (value & TIOCM_RTS)
mcr_value |= SERIAL_MCR_RTS;
mcr_value |= QT2_SERIAL_MCR_RTS;
if (value & TIOCM_DTR)
mcr_value |= SERIAL_MCR_DTR;
mcr_value |= QT2_SERIAL_MCR_DTR;
if (value & TIOCM_LOOP)
mcr_value |= SERIAL_MCR_LOOP;
mcr_value |= QT2_SERIAL_MCR_LOOP;
break;
case TIOCMBIC:
if (value & TIOCM_RTS)
mcr_value &= ~SERIAL_MCR_RTS;
mcr_value &= ~QT2_SERIAL_MCR_RTS;
if (value & TIOCM_DTR)
mcr_value &= ~SERIAL_MCR_DTR;
mcr_value &= ~QT2_SERIAL_MCR_DTR;
if (value & TIOCM_LOOP)
mcr_value &= ~SERIAL_MCR_LOOP;
mcr_value &= ~QT2_SERIAL_MCR_LOOP;
break;
default:
break;
@ -911,7 +919,7 @@ static int qt2_ioctl(struct tty_struct *tty, struct file *file,
} else if (cmd == TIOCMIWAIT) {
dbg("%s() port %d, cmd == TIOCMIWAIT enter",
__func__, port->number);
prev_msr_value = port_extra->shadowMSR & SERIAL_MSR_MASK;
prev_msr_value = port_extra->shadowMSR & QT2_SERIAL_MSR_MASK;
while (1) {
add_wait_queue(&port_extra->wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
@ -922,21 +930,21 @@ static int qt2_ioctl(struct tty_struct *tty, struct file *file,
/* see if a signal woke us up */
if (signal_pending(current))
return -ERESTARTSYS;
msr_value = port_extra->shadowMSR & SERIAL_MSR_MASK;
msr_value = port_extra->shadowMSR & QT2_SERIAL_MSR_MASK;
if (msr_value == prev_msr_value)
return -EIO; /* no change - error */
if ((arg & TIOCM_RNG &&
((prev_msr_value & SERIAL_MSR_RI) ==
(msr_value & SERIAL_MSR_RI))) ||
((prev_msr_value & QT2_SERIAL_MSR_RI) ==
(msr_value & QT2_SERIAL_MSR_RI))) ||
(arg & TIOCM_DSR &&
((prev_msr_value & SERIAL_MSR_DSR) ==
(msr_value & SERIAL_MSR_DSR))) ||
((prev_msr_value & QT2_SERIAL_MSR_DSR) ==
(msr_value & QT2_SERIAL_MSR_DSR))) ||
(arg & TIOCM_CD &&
((prev_msr_value & SERIAL_MSR_CD) ==
(msr_value & SERIAL_MSR_CD))) ||
((prev_msr_value & QT2_SERIAL_MSR_CD) ==
(msr_value & QT2_SERIAL_MSR_CD))) ||
(arg & TIOCM_CTS &&
((prev_msr_value & SERIAL_MSR_CTS) ==
(msr_value & SERIAL_MSR_CTS)))) {
((prev_msr_value & QT2_SERIAL_MSR_CTS) ==
(msr_value & QT2_SERIAL_MSR_CTS)))) {
return 0;
}
} /* end inifinite while */
@ -952,6 +960,120 @@ static int qt2_ioctl(struct tty_struct *tty, struct file *file,
}
}
/* Called when the user wishes to change the port settings using the termios
* userspace interface */
static void qt2_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial; /* parent serial device */
int baud, divisor, remainder;
unsigned char LCR_change_to = 0;
int status;
__u16 UartNumber;
dbg("%s(): port %d", __func__, port->number);
serial = port->serial;
UartNumber = port->number;
if (old_termios) {
if ((tty->termios->c_cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s(): Nothing to change", __func__);
return;
}
}
switch (tty->termios->c_cflag) {
case CS5:
LCR_change_to |= QT2_SERIAL_5_DATA;
break;
case CS6:
LCR_change_to |= QT2_SERIAL_6_DATA;
break;
case CS7:
LCR_change_to |= QT2_SERIAL_7_DATA;
break;
default:
case CS8:
LCR_change_to |= QT2_SERIAL_8_DATA;
break;
}
/* Parity stuff */
if (tty->termios->c_cflag & PARENB) {
if (tty->termios->c_cflag & PARODD)
LCR_change_to |= QT2_SERIAL_ODD_PARITY;
else
LCR_change_to |= QT2_SERIAL_EVEN_PARITY;
}
if (tty->termios->c_cflag & CSTOPB)
LCR_change_to |= QT2_SERIAL_TWO_STOPB;
else
LCR_change_to |= QT2_SERIAL_ONE_STOPB;
/* Thats the LCR stuff, go ahead and set it */
baud = tty_get_baud_rate(tty);
if (!baud) {
/* pick a default, any default... */
baud = 9600;
}
dbg("%s(): got baud = %d", __func__, baud);
divisor = QT2_MAX_BAUD_RATE / baud;
remainder = QT2_MAX_BAUD_RATE % baud;
/* Round to nearest divisor */
if (((remainder * 2) >= baud) && (baud != 110))
divisor++;
dbg("%s(): setting divisor = %d, QT2_MAX_BAUD_RATE = %d , LCR = 0x%x",
__func__, divisor, QT2_MAX_BAUD_RATE, LCR_change_to);
status = qt2_boxsetuart(serial, UartNumber, (unsigned short) divisor,
LCR_change_to);
if (status < 0) {
dbg("qt2_boxsetuart() failed");
return;
}
/* Now determine flow control */
if (tty->termios->c_cflag & CRTSCTS) {
dbg("%s(): Enabling HW flow control port %d", __func__,
port->number);
/* Enable RTS/CTS flow control */
status = qt2_boxsethw_flowctl(serial, UartNumber, true);
if (status < 0) {
dbg("qt2_boxsethw_flowctl() failed");
return;
}
} else {
/* Disable RTS/CTS flow control */
dbg("%s(): disabling HW flow control port %d", __func__,
port->number);
status = qt2_boxsethw_flowctl(serial, UartNumber, false);
if (status < 0) {
dbg("qt2_boxsethw_flowctl failed");
return;
}
}
/* if we are implementing XON/XOFF, set the start and stop character
* in the device */
if (I_IXOFF(tty) || I_IXON(tty)) {
unsigned char stop_char = STOP_CHAR(tty);
unsigned char start_char = START_CHAR(tty);
status = qt2_boxsetsw_flowctl(serial, UartNumber, stop_char,
start_char);
if (status < 0)
dbg("qt2_boxsetsw_flowctl (enabled) failed");
} else {
/* disable SW flow control */
status = qt2_boxunsetsw_flowctl(serial, UartNumber);
if (status < 0)
dbg("qt2_boxunsetsw_flowctl (disabling) failed");
}
}
static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
@ -977,17 +1099,17 @@ static int qt2_tiocmget(struct tty_struct *tty, struct file *file)
QT2_MODEM_STATUS_REGISTER, &msr_value);
}
if (status >= 0) {
result = ((mcr_value & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
result = ((mcr_value & QT2_SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
/*DTR set */
| ((mcr_value & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
| ((mcr_value & QT2_SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
/*RTS set */
| ((msr_value & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
| ((msr_value & QT2_SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
/* CTS set */
| ((msr_value & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
| ((msr_value & QT2_SERIAL_MSR_CD) ? TIOCM_CAR : 0)
/*Carrier detect set */
| ((msr_value & SERIAL_MSR_RI) ? TIOCM_RI : 0)
| ((msr_value & QT2_SERIAL_MSR_RI) ? TIOCM_RI : 0)
/* Ring indicator set */
| ((msr_value & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
| ((msr_value & QT2_SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
/* DSR set */
return result;
} else {
@ -1017,13 +1139,14 @@ static int qt2_tiocmset(struct tty_struct *tty, struct file *file,
/* Turn off RTS, DTR and loopback, then only turn on what was asked
* for */
mcr_value &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
mcr_value &= ~(QT2_SERIAL_MCR_RTS | QT2_SERIAL_MCR_DTR |
QT2_SERIAL_MCR_LOOP);
if (set & TIOCM_RTS)
mcr_value |= SERIAL_MCR_RTS;
mcr_value |= QT2_SERIAL_MCR_RTS;
if (set & TIOCM_DTR)
mcr_value |= SERIAL_MCR_DTR;
mcr_value |= QT2_SERIAL_MCR_DTR;
if (set & TIOCM_LOOP)
mcr_value |= SERIAL_MCR_LOOP;
mcr_value |= QT2_SERIAL_MCR_LOOP;
status = qt2_box_set_register(port->serial, UartNumber,
QT2_MODEM_CONTROL_REGISTER, mcr_value);
@ -1162,7 +1285,7 @@ static int qt2_conf_uart(struct usb_serial *serial, unsigned short Uart_Number,
UartNumandLCR = (LCR << 8) + Uart_Number;
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT_GET_SET_UART, 0x40, divisor, UartNumandLCR,
QT2_GET_SET_UART, 0x40, divisor, UartNumandLCR,
NULL, 0, 300);
return result;
}
@ -1464,8 +1587,8 @@ static void qt2_process_line_status(struct usb_serial_port *port,
{
/* obtain the private structure for the port */
struct quatech2_port *port_extra = qt2_get_port_private(port);
port_extra->shadowLSR = LineStatus & (SERIAL_LSR_OE | SERIAL_LSR_PE |
SERIAL_LSR_FE | SERIAL_LSR_BI);
port_extra->shadowLSR = LineStatus & (QT2_SERIAL_LSR_OE |
QT2_SERIAL_LSR_PE | QT2_SERIAL_LSR_FE | QT2_SERIAL_LSR_BI);
}
static void qt2_process_modem_status(struct usb_serial_port *port,
unsigned char ModemStatus)
@ -1602,6 +1725,79 @@ static int qt2_box_flush(struct usb_serial *serial, unsigned char uart_number,
return result;
}
/** qt2_boxsetuart - Issue a SET_UART vendor-spcific request on the default
* control pipe. If successful sets baud rate divisor and LCR value.
*/
static int qt2_boxsetuart(struct usb_serial *serial, unsigned short Uart_Number,
unsigned short default_divisor, unsigned char default_LCR)
{
unsigned short UartNumandLCR;
UartNumandLCR = (default_LCR << 8) + Uart_Number;
return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_GET_SET_UART, 0x40, default_divisor, UartNumandLCR,
NULL, 0, 300);
}
/** qt2_boxsethw_flowctl - Turn hardware (RTS/CTS) flow control on and off for
* a hardware UART.
*/
static int qt2_boxsethw_flowctl(struct usb_serial *serial,
unsigned int UartNumber, bool bSet)
{
__u8 MCR_Value = 0;
__u8 MSR_Value = 0;
__u16 MOUT_Value = 0;
if (bSet == true) {
MCR_Value = QT2_SERIAL_MCR_RTS;
/* flow control, box will clear RTS line to prevent remote
* device from transmitting more chars */
} else {
/* no flow control to remote device */
MCR_Value = 0;
}
MOUT_Value = MCR_Value << 8;
if (bSet == true) {
MSR_Value = QT2_SERIAL_MSR_CTS;
/* flow control on, box will inhibit tx data if CTS line is
* asserted */
} else {
/* Box will not inhibit tx data due to CTS line */
MSR_Value = 0;
}
MOUT_Value |= MSR_Value;
return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value, UartNumber,
NULL, 0, 300);
}
/** qt2_boxsetsw_flowctl - Turn software (XON/XOFF) flow control on for
* a hardware UART, and set the XON and XOFF characters.
*/
static int qt2_boxsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber,
unsigned char stop_char, unsigned char start_char)
{
__u16 nSWflowout;
nSWflowout = start_char << 8;
nSWflowout = (unsigned short)stop_char;
return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout, UartNumber,
NULL, 0, 300);
}
/** qt2_boxunsetsw_flowctl - Turn software (XON/XOFF) flow control off for
* a hardware UART.
*/
static int qt2_boxunsetsw_flowctl(struct usb_serial *serial, __u16 UartNumber)
{
return usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT2_SW_FLOW_CONTROL_DISABLE, 0x40, 0, UartNumber, NULL,
0, 300);
}
/*
* last things in file: stuff to register this driver into the generic
* USB serial framework.
@ -1625,8 +1821,8 @@ static struct usb_serial_driver quatech2_device = {
.unthrottle = qt_unthrottle,*/
.calc_num_ports = qt2_calc_num_ports,
.ioctl = qt2_ioctl,
/*.set_termios = qt_set_termios,
.break_ctl = qt_break,*/
.set_termios = qt2_set_termios,
/*.break_ctl = qt_break,*/
.tiocmget = qt2_tiocmget,
.tiocmset = qt2_tiocmset,
.attach = qt2_attach,