From 26c9d79b3730dff03d1c3ea6aee3e2968d36fe15 Mon Sep 17 00:00:00 2001
From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Date: Tue, 19 Mar 2019 12:21:39 +0000
Subject: [PATCH] ARM: dts: iwg23s-sbc: Add HDMI support

This patch adds HDMI video output support to the iwg23s board
from iWave. Due to a problem with the bootloader not dealing
with the configuration of one of the pins correctly, we have
to use a gpio-hog for the interrupt line to make sure the pin
is configured as GPIO-input when requesting the interrupt.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 79 +++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 77d18242ef59..9f9eb15a1e65 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -22,6 +22,17 @@
 		stdout-path = "serial1:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x20000000>;
@@ -80,10 +91,34 @@
 	status = "okay";
 };
 
+&du {
+	pinctrl-0 = <&du0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&gpio2 {
+	interrupt-fixup {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "hdmi-hpd-int";
+		input;
+	};
+};
+
 &i2c3 {
 	pinctrl-0 = <&i2c3_pins>;
 	pinctrl-names = "default";
@@ -97,12 +132,56 @@
 	};
 };
 
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hdmi@39 {
+		compatible = "sil,sii9022";
+		reg = <0x39>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				bridge_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
 &pfc {
 	avb_pins: avb {
 		groups = "avb_mdio", "avb_gmii_tx_rx";
 		function = "avb";
 	};
 
+	du0_pins: du0 {
+		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+		function = "du0";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4_e";
+		function = "i2c4";
+	};
+
 	i2c3_pins: i2c3 {
 		groups = "i2c3_c";
 		function = "i2c3";