diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 595d210655b6..6bd299e61f58 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -315,53 +315,11 @@ done:
  * Also they depend on separate root hub suspend/resume.
  */
 
-static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
-{
-	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
-		pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		(pdev->device == 0x1E26 ||
-		 pdev->device == 0x8C2D ||
-		 pdev->device == 0x8C26 ||
-		 pdev->device == 0x9C26);
-}
-
-static void ehci_enable_xhci_companion(void)
-{
-	struct pci_dev		*companion = NULL;
-
-	/* The xHCI and EHCI controllers are not on the same PCI slot */
-	for_each_pci_dev(companion) {
-		if (!usb_is_intel_switchable_xhci(companion))
-			continue;
-		usb_enable_xhci_ports(companion);
-		return;
-	}
-}
-
 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 
-	/* The BIOS on systems with the Intel Panther Point chipset may or may
-	 * not support xHCI natively.  That means that during system resume, it
-	 * may switch the ports back to EHCI so that users can use their
-	 * keyboard to select a kernel from GRUB after resume from hibernate.
-	 *
-	 * The BIOS is supposed to remember whether the OS had xHCI ports
-	 * enabled before resume, and switch the ports back to xHCI when the
-	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
-	 * writers.
-	 *
-	 * Unconditionally switch the ports back to xHCI after a system resume.
-	 * We can't tell whether the EHCI or xHCI controller will be resumed
-	 * first, so we have to do the port switchover in both drivers.  Writing
-	 * a '1' to the port switchover registers should have no effect if the
-	 * port was already switched over.
-	 */
-	if (usb_is_intel_switchable_ehci(pdev))
-		ehci_enable_xhci_companion();
-
 	if (ehci_resume(hcd, hibernated) != 0)
 		(void) ehci_pci_reinit(ehci, pdev);
 	return 0;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index b9848e4d3d44..2c76ef1320ea 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -735,32 +735,6 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
 	return -ETIMEDOUT;
 }
 
-#define PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI	0x8C31
-#define PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI	0x9C31
-
-bool usb_is_intel_ppt_switchable_xhci(struct pci_dev *pdev)
-{
-	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
-		pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
-}
-
-/* The Intel Lynx Point chipset also has switchable ports. */
-bool usb_is_intel_lpt_switchable_xhci(struct pci_dev *pdev)
-{
-	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
-		pdev->vendor == PCI_VENDOR_ID_INTEL &&
-		(pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_XHCI ||
-		 pdev->device == PCI_DEVICE_ID_INTEL_LYNX_POINT_LP_XHCI);
-}
-
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
-{
-	return usb_is_intel_ppt_switchable_xhci(pdev) ||
-		usb_is_intel_lpt_switchable_xhci(pdev);
-}
-EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
-
 /*
  * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
  * share some number of ports.  These ports can be switched between either
@@ -779,9 +753,23 @@ EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
  * terminations before switching the USB 2.0 wires over, so that USB 3.0
  * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
  */
-void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev)
 {
 	u32		ports_available;
+	bool		ehci_found = false;
+	struct pci_dev	*companion = NULL;
+
+	/* make sure an intel EHCI controller exists */
+	for_each_pci_dev(companion) {
+		if (companion->class == PCI_CLASS_SERIAL_USB_EHCI &&
+		    companion->vendor == PCI_VENDOR_ID_INTEL) {
+			ehci_found = true;
+			break;
+		}
+	}
+
+	if (!ehci_found)
+		return;
 
 	/* Don't switchover the ports if the user hasn't compiled the xHCI
 	 * driver.  Otherwise they will see "dead" USB ports that don't power
@@ -840,7 +828,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
 	dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
 			"to xHCI: 0x%x\n", ports_available);
 }
-EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
+EXPORT_SYMBOL_GPL(usb_enable_intel_xhci_ports);
 
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev)
 {
@@ -921,8 +909,8 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
 hc_init:
-	if (usb_is_intel_switchable_xhci(pdev))
-		usb_enable_xhci_ports(pdev);
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
 
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 4b8a2092432f..0a5e0fb8f466 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -8,8 +8,7 @@ int usb_amd_find_chipset_info(void);
 void usb_amd_dev_put(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
-bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
-void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
+void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev);
 void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
 void sb800_prefetch(struct device *dev, int on);
 #else
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cc24e39b97d5..475e06e10a77 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -250,13 +250,15 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	 * writers.
 	 *
 	 * Unconditionally switch the ports back to xHCI after a system resume.
-	 * We can't tell whether the EHCI or xHCI controller will be resumed
-	 * first, so we have to do the port switchover in both drivers.  Writing
-	 * a '1' to the port switchover registers should have no effect if the
-	 * port was already switched over.
+	 * It should not matter whether the EHCI or xHCI controller is
+	 * resumed first. It's enough to do the switchover in xHCI because
+	 * USB core won't notice anything as the hub driver doesn't start
+	 * running again until after all the devices (including both EHCI and
+	 * xHCI host controllers) have been resumed.
 	 */
-	if (usb_is_intel_switchable_xhci(pdev))
-		usb_enable_xhci_ports(pdev);
+
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
+		usb_enable_intel_xhci_ports(pdev);
 
 	retval = xhci_resume(xhci, hibernated);
 	return retval;