powerpc/47x: Add support for the new IBM currituck platform
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
This commit is contained in:
Tony Breeds
Josh Boyer
parent
df777bd39a
commit
228d550533
|
|
@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
|
|||
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
|
||||
|
||||
|
||||
|
|
@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
|
|||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
|
||||
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
|
||||
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
|
||||
treeboot-currituck.c
|
||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||
|
||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||
|
|
@ -212,6 +214,7 @@ image-$(CONFIG_WARP) += cuImage.warp
|
|||
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
|
||||
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
|
||||
treeImage.iss4xx-mpic
|
||||
image-$(CONFIG_CURRITUCK) += treeImage.currituck
|
||||
|
||||
# Board ports in arch/powerpc/platform/8xx/Kconfig
|
||||
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
|
||||
|
|
|
|||
|
|
@ -0,0 +1,237 @@
|
|||
/*
|
||||
* Device Tree Source for IBM Embedded PPC 476 Platform
|
||||
*
|
||||
* Copyright © 2011 Tony Breeds IBM Corporation
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/memreserve/ 0x01f00000 0x00100000; // spin table
|
||||
|
||||
/ {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
model = "ibm,currituck";
|
||||
compatible = "ibm,currituck";
|
||||
dcr-parent = <&{/cpus/cpu@0}>;
|
||||
|
||||
aliases {
|
||||
serial0 = &UART0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
model = "PowerPC,476";
|
||||
reg = <0>;
|
||||
clock-frequency = <1600000000>; // 1.6 GHz
|
||||
timebase-frequency = <100000000>; // 100Mhz
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-size = <32768>;
|
||||
d-cache-size = <32768>;
|
||||
dcr-controller;
|
||||
dcr-access-method = "native";
|
||||
status = "ok";
|
||||
};
|
||||
cpu@1 {
|
||||
device_type = "cpu";
|
||||
model = "PowerPC,476";
|
||||
reg = <1>;
|
||||
clock-frequency = <1600000000>; // 1.6 GHz
|
||||
timebase-frequency = <100000000>; // 100Mhz
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-size = <32768>;
|
||||
d-cache-size = <32768>;
|
||||
dcr-controller;
|
||||
dcr-access-method = "native";
|
||||
status = "disabled";
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x01f00000>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
|
||||
};
|
||||
|
||||
MPIC: interrupt-controller {
|
||||
compatible = "chrp,open-pic";
|
||||
interrupt-controller;
|
||||
dcr-reg = <0xffc00000 0x00040000>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
};
|
||||
|
||||
plb {
|
||||
compatible = "ibm,plb6";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
clock-frequency = <200000000>; // 200Mhz
|
||||
|
||||
POB0: opb {
|
||||
compatible = "ibm,opb-4xx", "ibm,opb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
/* Wish there was a nicer way of specifying a full
|
||||
* 32-bit range
|
||||
*/
|
||||
ranges = <0x00000000 0x00000200 0x00000000 0x80000000
|
||||
0x80000000 0x00000200 0x80000000 0x80000000>;
|
||||
clock-frequency = <100000000>;
|
||||
|
||||
UART0: serial@10000000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16750", "ns16550";
|
||||
reg = <0x10000000 0x00000008>;
|
||||
virtual-reg = <0xe1000000>;
|
||||
clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
|
||||
current-speed = <115200>;
|
||||
interrupt-parent = <&MPIC>;
|
||||
interrupts = <34 2>;
|
||||
};
|
||||
|
||||
IIC0: i2c@00000000 {
|
||||
compatible = "ibm,iic-currituck", "ibm,iic";
|
||||
reg = <0x0 0x00000014>;
|
||||
interrupt-parent = <&MPIC>;
|
||||
interrupts = <79 2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
rtc@68 {
|
||||
compatible = "stm,m41t80", "m41st85";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
PCIE0: pciex@10100000000 { // 4xGBIF1
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x0>; /* port number */
|
||||
reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0x80 0x20>;
|
||||
|
||||
// pci_space < pci_addr > < cpu_addr > < size >
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
PCIE1: pciex@30100000000 { // 4xGBIF0
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x1>; /* port number */
|
||||
reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0x60 0x20>;
|
||||
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
PCIE2: pciex@38100000000 { // 2xGBIF0
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x2>; /* port number */
|
||||
reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0xA0 0x20>;
|
||||
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = &UART0;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
/*
|
||||
* Copyright © 2011 Tony Breeds IBM Corporation
|
||||
*
|
||||
* Based on earlier code:
|
||||
* Copyright (C) Paul Mackerras 1997.
|
||||
*
|
||||
* Matt Porter <mporter@kernel.crashing.org>
|
||||
* Copyright 2002-2005 MontaVista Software Inc.
|
||||
*
|
||||
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
||||
* Copyright (c) 2003, 2004 Zultys Technologies
|
||||
*
|
||||
* Copyright 2007 David Gibson, IBM Corporation.
|
||||
* Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
|
||||
* Copyright © 2011 David Kleikamp IBM Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version
|
||||
* 2 of the License, or (at your option) any later version.
|
||||
*/
|
||||
#include <stdarg.h>
|
||||
#include <stddef.h>
|
||||
#include "types.h"
|
||||
#include "elf.h"
|
||||
#include "string.h"
|
||||
#include "stdio.h"
|
||||
#include "page.h"
|
||||
#include "ops.h"
|
||||
#include "reg.h"
|
||||
#include "io.h"
|
||||
#include "dcr.h"
|
||||
#include "4xx.h"
|
||||
#include "44x.h"
|
||||
#include "libfdt.h"
|
||||
|
||||
BSS_STACK(4096);
|
||||
|
||||
#define MAX_RANKS 0x4
|
||||
#define DDR3_MR0CF 0x80010011U
|
||||
|
||||
static unsigned long long ibm_currituck_memsize;
|
||||
static unsigned long long ibm_currituck_detect_memsize(void)
|
||||
{
|
||||
u32 reg;
|
||||
unsigned i;
|
||||
unsigned long long memsize = 0;
|
||||
|
||||
for(i = 0; i < MAX_RANKS; i++){
|
||||
reg = mfdcrx(DDR3_MR0CF + i);
|
||||
|
||||
if (!(reg & 1))
|
||||
continue;
|
||||
|
||||
reg &= 0x0000f000;
|
||||
reg >>= 12;
|
||||
memsize += (0x800000ULL << reg);
|
||||
}
|
||||
|
||||
return memsize;
|
||||
}
|
||||
|
||||
static void ibm_currituck_fixups(void)
|
||||
{
|
||||
void *devp = finddevice("/");
|
||||
u32 dma_ranges[7];
|
||||
|
||||
dt_fixup_memory(0x0ULL, ibm_currituck_memsize);
|
||||
|
||||
while ((devp = find_node_by_devtype(devp, "pci"))) {
|
||||
if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
|
||||
printf("%s: Failed to get dma-ranges\r\n", __func__);
|
||||
continue;
|
||||
}
|
||||
|
||||
dma_ranges[5] = ibm_currituck_memsize >> 32;
|
||||
dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
|
||||
|
||||
setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
|
||||
}
|
||||
}
|
||||
|
||||
#define SPRN_PIR 0x11E /* Processor Indentification Register */
|
||||
void platform_init(void)
|
||||
{
|
||||
unsigned long end_of_ram, avail_ram;
|
||||
u32 pir_reg;
|
||||
int node, size;
|
||||
const u32 *timebase;
|
||||
|
||||
ibm_currituck_memsize = ibm_currituck_detect_memsize();
|
||||
if (ibm_currituck_memsize >> 32)
|
||||
end_of_ram = ~0UL;
|
||||
else
|
||||
end_of_ram = ibm_currituck_memsize;
|
||||
avail_ram = end_of_ram - (unsigned long)_end;
|
||||
|
||||
simple_alloc_init(_end, avail_ram, 128, 64);
|
||||
platform_ops.fixups = ibm_currituck_fixups;
|
||||
platform_ops.exit = ibm44x_dbcr_reset;
|
||||
pir_reg = mfspr(SPRN_PIR);
|
||||
|
||||
/* Make sure FDT blob is sane */
|
||||
if (fdt_check_header(_dtb_start) != 0)
|
||||
fatal("Invalid device tree blob\n");
|
||||
|
||||
node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
|
||||
"cpu", sizeof("cpu"));
|
||||
if (!node)
|
||||
fatal("Cannot find cpu node\n");
|
||||
timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
|
||||
if (timebase && (size == 4))
|
||||
timebase_period_ns = 1000000000 / *timebase;
|
||||
|
||||
fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
|
||||
fdt_init(_dtb_start);
|
||||
|
||||
serial_console_init();
|
||||
}
|
||||
|
|
@ -244,6 +244,9 @@ gamecube|wii)
|
|||
link_address='0x600000'
|
||||
platformo="$object/$platform-head.o $object/$platform.o"
|
||||
;;
|
||||
treeboot-currituck)
|
||||
link_address='0x1000000'
|
||||
;;
|
||||
treeboot-iss4xx-mpic)
|
||||
platformo="$object/treeboot-iss4xx.o"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,110 @@
|
|||
CONFIG_44x=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PPC_47x=y
|
||||
# CONFIG_EBONY is not set
|
||||
CONFIG_CURRITUCK=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_HZ_100=y
|
||||
CONFIG_MATH_EMULATION=y
|
||||
CONFIG_IRQ_ALL_CPUS=y
|
||||
CONFIG_CMDLINE_BOOL=y
|
||||
CONFIG_CMDLINE=""
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_JEDECPROBE=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=35000
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_ATA=y
|
||||
# CONFIG_SATA_PMP is not set
|
||||
CONFIG_SATA_SIL24=y
|
||||
# CONFIG_ATA_SFF is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_E1000E=y
|
||||
# CONFIG_NETDEV_10000 is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_VT is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_EXTENDED=y
|
||||
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_IBM_IIC=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_M41T80=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT3_FS_SECURITY=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_NLS_DEFAULT="n"
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_SYSCTL_SYSCALL_CHECK=y
|
||||
CONFIG_XMON=y
|
||||
CONFIG_XMON_DEFAULT=y
|
||||
CONFIG_PPC_EARLY_DEBUG=y
|
||||
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
|
||||
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
|
||||
CONFIG_CRYPTO=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_PCBC=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
|
|
@ -186,6 +186,16 @@ config ISS4xx
|
|||
help
|
||||
This option enables support for the IBM ISS simulation environment
|
||||
|
||||
config CURRITUCK
|
||||
bool "IBM Currituck (476fpe) Support"
|
||||
depends on PPC_47x
|
||||
default n
|
||||
select SWIOTLB
|
||||
select 476FPE
|
||||
select PPC4xx_PCI_EXPRESS
|
||||
help
|
||||
This option enables support for the IBM Currituck (476fpe) evaluation board
|
||||
|
||||
config ICON
|
||||
bool "Icon"
|
||||
depends on 44x
|
||||
|
|
|
|||
|
|
@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
|
|||
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
|
||||
obj-$(CONFIG_ISS4xx) += iss4xx.o
|
||||
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
|
||||
obj-$(CONFIG_CURRITUCK) += currituck.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,204 @@
|
|||
/*
|
||||
* Currituck board specific routines
|
||||
*
|
||||
* Copyright © 2011 Tony Breeds IBM Corporation
|
||||
*
|
||||
* Based on earlier code:
|
||||
* Matt Porter <mporter@kernel.crashing.org>
|
||||
* Copyright 2002-2005 MontaVista Software Inc.
|
||||
*
|
||||
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
||||
* Copyright (c) 2003-2005 Zultys Technologies
|
||||
*
|
||||
* Rewritten and ported to the merged powerpc tree:
|
||||
* Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
|
||||
* Copyright © 2011 David Kliekamp IBM Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/memblock.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/rtc.h>
|
||||
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/uic.h>
|
||||
#include <asm/ppc4xx.h>
|
||||
#include <asm/mpic.h>
|
||||
#include <asm/mmu.h>
|
||||
|
||||
#include <linux/pci.h>
|
||||
|
||||
static __initdata struct of_device_id ppc47x_of_bus[] = {
|
||||
{ .compatible = "ibm,plb4", },
|
||||
{ .compatible = "ibm,plb6", },
|
||||
{ .compatible = "ibm,opb", },
|
||||
{ .compatible = "ibm,ebc", },
|
||||
{},
|
||||
};
|
||||
|
||||
/* The EEPROM is missing and the default values are bogus. This forces USB in
|
||||
* to EHCI mode */
|
||||
static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
|
||||
{
|
||||
if (of_machine_is_compatible("ibm,currituck")) {
|
||||
pci_write_config_dword(dev, 0xe0, 0x0114231f);
|
||||
pci_write_config_dword(dev, 0xe4, 0x00006c40);
|
||||
}
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
|
||||
|
||||
static int __init ppc47x_device_probe(void)
|
||||
{
|
||||
of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(ppc47x, ppc47x_device_probe);
|
||||
|
||||
/* We can have either UICs or MPICs */
|
||||
static void __init ppc47x_init_irq(void)
|
||||
{
|
||||
struct device_node *np;
|
||||
|
||||
/* Find top level interrupt controller */
|
||||
for_each_node_with_property(np, "interrupt-controller") {
|
||||
if (of_get_property(np, "interrupts", NULL) == NULL)
|
||||
break;
|
||||
}
|
||||
if (np == NULL)
|
||||
panic("Can't find top level interrupt controller");
|
||||
|
||||
/* Check type and do appropriate initialization */
|
||||
if (of_device_is_compatible(np, "chrp,open-pic")) {
|
||||
/* The MPIC driver will get everything it needs from the
|
||||
* device-tree, just pass 0 to all arguments
|
||||
*/
|
||||
struct mpic *mpic =
|
||||
mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0, " MPIC ");
|
||||
BUG_ON(mpic == NULL);
|
||||
mpic_init(mpic);
|
||||
ppc_md.get_irq = mpic_get_irq;
|
||||
} else
|
||||
panic("Unrecognized top level interrupt controller");
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
|
||||
{
|
||||
mpic_setup_this_cpu();
|
||||
}
|
||||
|
||||
static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
|
||||
{
|
||||
struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
|
||||
const u64 *spin_table_addr_prop;
|
||||
u32 *spin_table;
|
||||
extern void start_secondary_47x(void);
|
||||
|
||||
BUG_ON(cpunode == NULL);
|
||||
|
||||
/* Assume spin table. We could test for the enable-method in
|
||||
* the device-tree but currently there's little point as it's
|
||||
* our only supported method
|
||||
*/
|
||||
spin_table_addr_prop =
|
||||
of_get_property(cpunode, "cpu-release-addr", NULL);
|
||||
|
||||
if (spin_table_addr_prop == NULL) {
|
||||
pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
|
||||
cpu);
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Assume it's mapped as part of the linear mapping. This is a bit
|
||||
* fishy but will work fine for now
|
||||
*
|
||||
* XXX: Is there any reason to assume differently?
|
||||
*/
|
||||
spin_table = (u32 *)__va(*spin_table_addr_prop);
|
||||
pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
|
||||
|
||||
spin_table[3] = cpu;
|
||||
smp_wmb();
|
||||
spin_table[1] = __pa(start_secondary_47x);
|
||||
mb();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct smp_ops_t ppc47x_smp_ops = {
|
||||
.probe = smp_mpic_probe,
|
||||
.message_pass = smp_mpic_message_pass,
|
||||
.setup_cpu = smp_ppc47x_setup_cpu,
|
||||
.kick_cpu = smp_ppc47x_kick_cpu,
|
||||
.give_timebase = smp_generic_give_timebase,
|
||||
.take_timebase = smp_generic_take_timebase,
|
||||
};
|
||||
|
||||
static void __init ppc47x_smp_init(void)
|
||||
{
|
||||
if (mmu_has_feature(MMU_FTR_TYPE_47x))
|
||||
smp_ops = &ppc47x_smp_ops;
|
||||
}
|
||||
|
||||
#else /* CONFIG_SMP */
|
||||
static void __init ppc47x_smp_init(void) { }
|
||||
#endif /* CONFIG_SMP */
|
||||
|
||||
static void __init ppc47x_setup_arch(void)
|
||||
{
|
||||
|
||||
/* No need to check the DMA config as we /know/ our windows are all of
|
||||
* RAM. Lets hope that doesn't change */
|
||||
#ifdef CONFIG_SWIOTLB
|
||||
if (memblock_end_of_DRAM() > 0xffffffff) {
|
||||
ppc_swiotlb_enable = 1;
|
||||
set_pci_dma_ops(&swiotlb_dma_ops);
|
||||
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
|
||||
}
|
||||
#endif
|
||||
ppc47x_smp_init();
|
||||
}
|
||||
|
||||
/*
|
||||
* Called very early, MMU is off, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init ppc47x_probe(void)
|
||||
{
|
||||
unsigned long root = of_get_flat_dt_root();
|
||||
|
||||
if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
/* Use USB controller should have been hardware swizzled but it wasn't :( */
|
||||
static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
|
||||
{
|
||||
if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
|
||||
dev->device == 0x00e0)) {
|
||||
dev->irq = irq_create_mapping(NULL, 47);
|
||||
pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
|
||||
}
|
||||
}
|
||||
|
||||
define_machine(ppc47x) {
|
||||
.name = "PowerPC 47x",
|
||||
.probe = ppc47x_probe,
|
||||
.progress = udbg_progress,
|
||||
.init_IRQ = ppc47x_init_irq,
|
||||
.setup_arch = ppc47x_setup_arch,
|
||||
.pci_irq_fixup = ppc47x_pci_irq_fixup,
|
||||
.restart = ppc4xx_reset_system,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
};
|
||||
Loading…
Reference in New Issue