i40e: ShadowRAM checksum calculation change

Due to changes in FW the SW is required to perform double SR dump in
some cases.

Implementation adds two new steps to update nvm checksum function:
* recalculate checksum and check if checksum in NVM is correct
* if checksum in NVM is not correct then update it again

Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Maciej Paczkowski 2019-02-28 09:52:50 -08:00 committed by Jeff Kirsher
parent 5a189f1550
commit 226436dc8a
1 changed files with 25 additions and 4 deletions

View File

@ -574,13 +574,34 @@ i40e_calc_nvm_checksum_exit:
i40e_status i40e_update_nvm_checksum(struct i40e_hw *hw)
{
i40e_status ret_code;
u16 checksum;
u16 checksum, checksum_sr;
__le16 le_sum;
ret_code = i40e_calc_nvm_checksum(hw, &checksum);
if (!ret_code) {
le_sum = cpu_to_le16(checksum);
ret_code = i40e_write_nvm_aq(hw, 0x00, I40E_SR_SW_CHECKSUM_WORD,
if (ret_code)
return ret_code;
le_sum = cpu_to_le16(checksum);
ret_code = i40e_write_nvm_aq(hw, 0x00, I40E_SR_SW_CHECKSUM_WORD,
1, &le_sum, true);
if (ret_code)
return ret_code;
/* Due to changes in FW the SW is required to perform double SR-dump
* in some cases. SR-dump is the process when internal shadow RAM is
* dumped into flash bank. It is triggered by setting "last_command"
* argument in i40e_write_nvm_aq function call.
* Since FW 1.8 we need to calculate SR checksum again and update it
* in flash if it is not equal to previously computed checksum.
* This situation would occur only in FW >= 1.8
*/
ret_code = i40e_calc_nvm_checksum(hw, &checksum_sr);
if (ret_code)
return ret_code;
if (checksum_sr != checksum) {
le_sum = cpu_to_le16(checksum_sr);
ret_code = i40e_write_nvm_aq(hw, 0x00,
I40E_SR_SW_CHECKSUM_WORD,
1, &le_sum, true);
}