UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

USB: changes for v5.10 merge window 

Most of changes are on dwc3 (38.8%) with cdns3 falling close
 behind (24.1%).
 
 The biggest changes here are a series of non-critical fixes to corner
 cases on dwc3, produced by Thinh N, and a series of major improvements
 to cdns3 produced by Peter C.
 
 We also have the traditional set of new device support (Intel Keem
 Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
 fixes on dwc3 by yours truly and a set of minor changes all over the
 stack.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElLzh7wn96CXwjh2IzL64meEamQYFAl93ARkACgkQzL64meEa
 mQZmexAAjVCwthkyfobTbEEzKVmo33i4GsXmrFMujLLyFoF/EIH99bf/Y81ljv6N
 +krqeyUTBXv9CB0tRHgvJY9oR9clcqW9MKB8Gb61KOOyVw8jFJIGjUmqqzYWsyC0
 q1kmue4zf9lWgTCaUygwrok/gC7wHFRqDHYn4admF+Q6NmlB+3W4J5on8kQcIOwG
 ulnlYbGm9NGv2aPKyJ9pxsN0DpELCs/8C67vr9bSny1cQa31OTL3eesMQzUVjJn0
 y/PuNWJbSYzPq5lZPG2S5B7owHWWVIWlT5ZLjiYJXBl1BhIgqUakliyjE6ftsiIr
 V54qWKL7U43FzrFVAPrrhRgFiknso/qpzXDMzJA7mHDtjCIZ/VXXOPNUvw5ufSUZ
 uilqAPUYvjdRAPM0VxUKItGHgOmlDd8zxFgn3M9YxiBObZT1zdBYT8ZKoE66x0we
 qqlzbY0txVJYVbmNYMFZNToMf5g7LXSBZ0dsuAp9Ca58Zf7PanK677wemiP6PpAS
 hwTxWkc/VHxoqUOxzV8rTvjgKh5dNO7d4Gc7gsfl5bNa5lwpKHBh62CoBN6yVNXM
 gyrlGHsNKCnu6TaUaia4bb3191sviFNXhRcaaJtrt+GHs96ENMDdgRZ8zXwF3PTV
 NghFJ2EwVdtnrJL+ifGP+GURgvDlgHzAAMx1gABBCMlrTzEZhR0=
 =e08s
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

USB: changes for v5.10 merge window

Most of changes are on dwc3 (38.8%) with cdns3 falling close
behind (24.1%).

The biggest changes here are a series of non-critical fixes to corner
cases on dwc3, produced by Thinh N, and a series of major improvements
to cdns3 produced by Peter C.

We also have the traditional set of new device support (Intel Keem
Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch
fixes on dwc3 by yours truly and a set of minor changes all over the
stack.

* tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits)
  usb: dwc2: Fix INTR OUT transfers in DDMA mode.
  usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs
  usb: dwc2: override PHY input signals with usb role switch support
  dt-bindings: usb: dwc2: add optional usb-role-switch property
  usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform
  dt-bindings: usb: Add Intel Keem Bay USB controller bindings
  usb: dwc3: gadget: Support up to max stream id
  usb: dwc3: gadget: Return early if no TRB update
  usb: dwc3: gadget: Keep TRBs in request order
  usb: dwc3: gadget: Revise setting IOC when no TRB left
  usb: dwc3: gadget: Look ahead when setting IOC
  usb: dwc3: gadget: Allow restarting a transfer
  usb: bdc: remove duplicated error message
  usb: dwc3: Stop active transfers before halting the controller
  usb: cdns3: gadget: enlarge the TRB ring length
  usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above
  usb: cdns3: gadget: need to handle sg case for workaround 2 case
  usb: cdns3: gadget: handle sg list use case at completion correctly
  usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case
  usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer
  ...
This commit is contained in:
Greg Kroah-Hartman 2020-10-03 15:59:57 +02:00
parent 97b65223c1 b2c586eb07
commit 21c949b218
63 changed files with 2062 additions and 765 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
View File

@ -25,13 +25,14 @@ description: |
The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
host-only mode.
The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY.
The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
properties:
compatible:
enum:
- amlogic,meson-gxl-usb-ctrl
- amlogic,meson-gxm-usb-ctrl
- amlogic,meson-axg-usb-ctrl
- amlogic,meson-g12a-usb-ctrl
- amlogic,meson-a1-usb-ctrl
@ -151,6 +152,25 @@ allOf:
required:
- clock-names
- if:
properties:
compatible:
enum:
- amlogic,meson-axg-usb-ctrl
then:
properties:
phy-names:
items:
- const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
clocks:
minItems: 2
clock-names:
items:
- const: usb_ctrl
- const: ddr
required:
- clock-names
- if:
properties:
compatible:

1
Documentation/devicetree/bindings/usb/atmel-usb.txt
View File

@ -82,6 +82,7 @@ Required properties:
"atmel,at91sam9rl-udc"
"atmel,at91sam9g45-udc"
"atmel,sama5d3-udc"
"microchip,sam9x60-udc"
- reg: Address and length of the register set for the device
- interrupts: Should contain usba interrupt
- clocks: Should reference the peripheral and host clocks

96
Documentation/devicetree/bindings/usb/cdns,usb3.yaml Normal file
View File

@ -0,0 +1,96 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Cadence USBSS-DRD controller bindings
maintainers:
- Pawel Laszczak <pawell@cadence.com>
properties:
compatible:
const: cdns,usb3
reg:
items:
- description: OTG controller registers
- description: XHCI Host controller registers
- description: DEVICE controller registers
reg-names:
items:
- const: otg
- const: xhci
- const: dev
interrupts:
items:
- description: OTG/DRD controller interrupt
- description: XHCI host controller interrupt
- description: Device controller interrupt
interrupt-names:
items:
- const: host
- const: peripheral
- const: otg
dr_mode:
enum: [host, otg, peripheral]
maximum-speed:
enum: [super-speed, high-speed, full-speed]
phys:
minItems: 1
maxItems: 2
phy-names:
minItems: 1
maxItems: 2
items:
anyOf:
- const: cdns3,usb2-phy
- const: cdns3,usb3-phy
cdns,on-chip-buff-size:
description:
size of memory intended as internal memory for endpoints
buffers expressed in KB
$ref: /schemas/types.yaml#/definitions/uint32
cdns,phyrst-a-enable:
description: Enable resetting of PHY if Rx fail is detected
type: boolean
required:
- compatible
- reg
- reg-names
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
bus {
#address-cells = <2>;
#size-cells = <2>;
usb@6000000 {
compatible = "cdns,usb3";
reg = <0x00 0x6000000 0x00 0x10000>,
<0x00 0x6010000 0x00 0x10000>,
<0x00 0x6020000 0x00 0x10000>;
reg-names = "otg", "xhci", "dev";
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host", "peripheral", "otg";
maximum-speed = "super-speed";
dr_mode = "otg";
};
};

45
Documentation/devicetree/bindings/usb/cdns-usb3.txt
View File

@ -1,45 +0,0 @@
Binding for the Cadence USBSS-DRD controller
Required properties:
- reg: Physical base address and size of the controller's register areas.
Controller has 3 different regions:
- HOST registers area
- DEVICE registers area
- OTG/DRD registers area
- reg-names - register memory area names:
"xhci" - for HOST registers space
"dev" - for DEVICE registers space
"otg" - for OTG/DRD registers space
- compatible: Should contain: "cdns,usb3"
- interrupts: Interrupts used by cdns3 controller:
"host" - interrupt used by XHCI driver.
"peripheral" - interrupt used by device driver
"otg" - interrupt used by DRD/OTG part of driver
Optional properties:
- maximum-speed : valid arguments are "super-speed", "high-speed" and
"full-speed"; refer to usb/generic.txt
- dr_mode: Should be one of "host", "peripheral" or "otg".
- phys: reference to the USB PHY
- phy-names: from the *Generic PHY* bindings;
Supported names are:
- cdns3,usb2-phy
- cdns3,usb3-phy
- cdns,on-chip-buff-size : size of memory intended as internal memory for endpoints
buffers expressed in KB
Example:
usb@f3000000 {
compatible = "cdns,usb3";
interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_USB_IRQ 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host", "peripheral", "otg";
reg = <0xf3000000 0x10000>, /* memory area for HOST registers */
<0xf3010000 0x10000>, /* memory area for DEVICE registers */
<0xf3020000 0x10000>; /* memory area for OTG/DRD registers */
reg-names = "xhci", "dev", "otg";
phys = <&usb2_phy>, <&usb3_phy>;
phy-names = "cdns3,usb2-phy", "cnds3,usb3-phy";
};

5
Documentation/devicetree/bindings/usb/dwc2.yaml
View File

@ -39,6 +39,7 @@ properties:
- amlogic,meson-g12a-usb
- const: snps,dwc2
- const: amcc,dwc-otg
- const: apm,apm82181-dwc-otg
- const: snps,dwc2
- const: st,stm32f4x9-fsotg
- const: st,stm32f4x9-hsotg
@ -102,6 +103,10 @@ properties:
dr_mode:
enum: [host, peripheral, otg]
usb-role-switch:
$ref: /schemas/types.yaml#/definitions/flag
description: Support role switch.
g-rx-fifo-size:
$ref: /schemas/types.yaml#/definitions/uint32
description: size of rx fifo size in gadget mode.

3
Documentation/devicetree/bindings/usb/dwc3.txt
View File

@ -78,6 +78,9 @@ Optional properties:
park mode are disabled.
- snps,dis_metastability_quirk: when set, disable metastability workaround.
CAUTION: use only if you are absolutely sure of it.
- snps,dis-split-quirk: when set, change the way URBs are handled by the
driver. Needed to avoid -EPROTO errors with usbhid
on some devices (Hikey 970).
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold

77
Documentation/devicetree/bindings/usb/intel,keembay-dwc3.yaml Normal file
View File

@ -0,0 +1,77 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/intel,keembay-dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel Keem Bay DWC3 USB controller
maintainers:
- Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
properties:
compatible:
const: intel,keembay-dwc3
clocks:
maxItems: 4
clock-names:
items:
- const: async_master
- const: ref
- const: alt_ref
- const: suspend
ranges: true
'#address-cells':
enum: [ 1, 2 ]
'#size-cells':
enum: [ 1, 2 ]
# Required child node:
patternProperties:
"^dwc3@[0-9a-f]+$":
type: object
description:
A child node must exist to represent the core DWC3 IP block.
The content of the node is defined in dwc3.txt.
required:
- compatible
- clocks
- clock-names
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#define KEEM_BAY_A53_AUX_USB
#define KEEM_BAY_A53_AUX_USB_REF
#define KEEM_BAY_A53_AUX_USB_ALT_REF
#define KEEM_BAY_A53_AUX_USB_SUSPEND
usb {
compatible = "intel,keembay-dwc3";
clocks = <&scmi_clk KEEM_BAY_A53_AUX_USB>,
<&scmi_clk KEEM_BAY_A53_AUX_USB_REF>,
<&scmi_clk KEEM_BAY_A53_AUX_USB_ALT_REF>,
<&scmi_clk KEEM_BAY_A53_AUX_USB_SUSPEND>;
clock-names = "async_master", "ref", "alt_ref", "suspend";
ranges;
#address-cells = <1>;
#size-cells = <1>;
dwc3@34000000 {
compatible = "snps,dwc3";
reg = <0x34000000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "peripheral";
};
};

18
MAINTAINERS
View File

@ -3475,6 +3475,14 @@ F: drivers/bus/brcmstb_gisb.c
F: drivers/pci/controller/pcie-brcmstb.c
N: brcmstb
BROADCOM BDC DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-usb@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: Documentation/devicetree/bindings/usb/brcm,bdc.txt
F: drivers/usb/gadget/udc/bdc/
BROADCOM BMIPS CPUFREQ DRIVER
M: Markus Mayer <mmayer@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
@ -3848,6 +3856,16 @@ S: Orphan
F: Documentation/devicetree/bindings/mtd/cadence-nand-controller.txt
F: drivers/mtd/nand/raw/cadence-nand-controller.c
CADENCE USB3 DRD IP DRIVER
M: Peter Chen <peter.chen@nxp.com>
M: Pawel Laszczak <pawell@cadence.com>
M: Roger Quadros <rogerq@ti.com>
L: linux-usb@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git
F: Documentation/devicetree/bindings/usb/cdns-usb3.txt
F: drivers/usb/cdns3/
CADET FM/AM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org

13
arch/arm/boot/dts/at91-sam9x60ek.dts
View File

@ -563,6 +563,12 @@
atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
usb0 {
pinctrl_usba_vbus: usba_vbus {
atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
}; /* pinctrl */
&pmc {
@ -666,6 +672,13 @@
};
};
&usb0 {
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
&usb1 {
num-ports = <3>;
atmel,vbus-gpio = <0

14
arch/arm/boot/dts/sam9x60.dtsi
View File

@ -69,6 +69,20 @@
#size-cells = <1>;
ranges;
usb0: gadget@500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "microchip,sam9x60-udc";
reg = <0x00500000 0x100000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <480000000>;
status = "disabled";
};
usb1: ohci@600000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;

191
drivers/usb/cdns3/cdns3-imx.c
View File

@ -15,6 +15,8 @@
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/iopoll.h>
#include <linux/pm_runtime.h>
#include "core.h"
#define USB3_CORE_CTRL1 0x00
#define USB3_CORE_CTRL2 0x04
@ -32,7 +34,7 @@
/* Register bits definition */
/* USB3_CORE_CTRL1 */
#define SW_RESET_MASK (0x3f << 26)
#define SW_RESET_MASK GENMASK(31, 26)
#define PWR_SW_RESET BIT(31)
#define APB_SW_RESET BIT(30)
#define AXI_SW_RESET BIT(29)
@ -53,8 +55,8 @@
#define LPM_CLK_REQ BIT(28)
#define DEVU3_WAEKUP_EN BIT(14)
#define OTG_WAKEUP_EN BIT(12)
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
#define DEV_INT_EN (3 << 8) /* DEV INT b9:8 */
#define HOST_INT1_EN (1 << 0) /* HOST INT b7:0 */
/* USB3_CORE_STATUS */
#define MDCTRL_CLK_STATUS BIT(15)
@ -66,11 +68,30 @@
#define CLK_VALID_COMPARE_BITS (0xf << 28)
#define PHY_REFCLK_REQ (1 << 0)
/* OTG registers definition */
#define OTGSTS 0x4
/* OTGSTS */
#define OTG_NRDY BIT(11)
/* xHCI registers definition */
#define XECP_PM_PMCSR 0x8018
#define XECP_AUX_CTRL_REG1 0x8120
/* Register bits definition */
/* XECP_AUX_CTRL_REG1 */
#define CFG_RXDET_P3_EN BIT(15)
/* XECP_PM_PMCSR */
#define PS_MASK GENMASK(1, 0)
#define PS_D0 0
#define PS_D1 1
struct cdns_imx {
struct device *dev;
void __iomem *noncore;
struct clk_bulk_data *clks;
int num_clks;
struct platform_device *cdns3_pdev;
};
static inline u32 cdns_imx_readl(struct cdns_imx *data, u32 offset)
@ -126,6 +147,20 @@ static int cdns_imx_noncore_init(struct cdns_imx *data)
return ret;
}
static int cdns_imx_platform_suspend(struct device *dev,
bool suspend, bool wakeup);
static struct cdns3_platform_data cdns_imx_pdata = {
.platform_suspend = cdns_imx_platform_suspend,
};
static const struct of_dev_auxdata cdns_imx_auxdata[] = {
{
.compatible = "cdns,usb3",
.platform_data = &cdns_imx_pdata,
},
{},
};
static int cdns_imx_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@ -162,14 +197,18 @@ static int cdns_imx_probe(struct platform_device *pdev)
if (ret)
goto err;
ret = of_platform_populate(node, NULL, NULL, dev);
ret = of_platform_populate(node, NULL, cdns_imx_auxdata, dev);
if (ret) {
dev_err(dev, "failed to create children: %d\n", ret);
goto err;
}
return ret;
device_set_wakeup_capable(dev, true);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_forbid(dev);
return ret;
err:
clk_bulk_disable_unprepare(data->num_clks, data->clks);
return ret;
@ -194,6 +233,147 @@ static int cdns_imx_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
static void cdns3_set_wakeup(struct cdns_imx *data, bool enable)
{
u32 value;
value = cdns_imx_readl(data, USB3_INT_REG);
if (enable)
value |= OTG_WAKEUP_EN | DEVU3_WAEKUP_EN;
else
value &= ~(OTG_WAKEUP_EN | DEVU3_WAEKUP_EN);
cdns_imx_writel(data, USB3_INT_REG, value);
}
static int cdns_imx_platform_suspend(struct device *dev,
bool suspend, bool wakeup)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
struct device *parent = dev->parent;
struct cdns_imx *data = dev_get_drvdata(parent);
void __iomem *otg_regs = (void __iomem *)(cdns->otg_regs);
void __iomem *xhci_regs = cdns->xhci_regs;
u32 value;
int ret = 0;
if (cdns->role != USB_ROLE_HOST)
return 0;
if (suspend) {
/* SW request low power when all usb ports allow to it ??? */
value = readl(xhci_regs + XECP_PM_PMCSR);
value &= ~PS_MASK;
value |= PS_D1;
writel(value, xhci_regs + XECP_PM_PMCSR);
/* mdctrl_clk_sel */
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
value |= MDCTRL_CLK_SEL;
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
/* wait for mdctrl_clk_status */
value = cdns_imx_readl(data, USB3_CORE_STATUS);
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
(value & MDCTRL_CLK_STATUS) == MDCTRL_CLK_STATUS,
10, 100000);
if (ret)
dev_warn(parent, "wait mdctrl_clk_status timeout\n");
/* wait lpm_clk_req to be 0 */
value = cdns_imx_readl(data, USB3_INT_REG);
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
(value & LPM_CLK_REQ) != LPM_CLK_REQ,
10, 100000);
if (ret)
dev_warn(parent, "wait lpm_clk_req timeout\n");
/* wait phy_refclk_req to be 0 */
value = cdns_imx_readl(data, USB3_SSPHY_STATUS);
ret = readl_poll_timeout(data->noncore + USB3_SSPHY_STATUS, value,
(value & PHY_REFCLK_REQ) != PHY_REFCLK_REQ,
10, 100000);
if (ret)
dev_warn(parent, "wait phy_refclk_req timeout\n");
cdns3_set_wakeup(data, wakeup);
} else {
cdns3_set_wakeup(data, false);
/* SW request D0 */
value = readl(xhci_regs + XECP_PM_PMCSR);
value &= ~PS_MASK;
value |= PS_D0;
writel(value, xhci_regs + XECP_PM_PMCSR);
/* clr CFG_RXDET_P3_EN */
value = readl(xhci_regs + XECP_AUX_CTRL_REG1);
value &= ~CFG_RXDET_P3_EN;
writel(value, xhci_regs + XECP_AUX_CTRL_REG1);
/* clear mdctrl_clk_sel */
value = cdns_imx_readl(data, USB3_CORE_CTRL1);
value &= ~MDCTRL_CLK_SEL;
cdns_imx_writel(data, USB3_CORE_CTRL1, value);
/* wait CLK_125_REQ to be 1 */
value = cdns_imx_readl(data, USB3_INT_REG);
ret = readl_poll_timeout(data->noncore + USB3_INT_REG, value,
(value & CLK_125_REQ) == CLK_125_REQ,
10, 100000);
if (ret)
dev_warn(parent, "wait CLK_125_REQ timeout\n");
/* wait for mdctrl_clk_status is cleared */
value = cdns_imx_readl(data, USB3_CORE_STATUS);
ret = readl_poll_timeout(data->noncore + USB3_CORE_STATUS, value,
(value & MDCTRL_CLK_STATUS) != MDCTRL_CLK_STATUS,
10, 100000);
if (ret)
dev_warn(parent, "wait mdctrl_clk_status cleared timeout\n");
/* Wait until OTG_NRDY is 0 */
value = readl(otg_regs + OTGSTS);
ret = readl_poll_timeout(otg_regs + OTGSTS, value,
(value & OTG_NRDY) != OTG_NRDY,
10, 100000);
if (ret)
dev_warn(parent, "wait OTG ready timeout\n");
}
return ret;
}
static int cdns_imx_resume(struct device *dev)
{
struct cdns_imx *data = dev_get_drvdata(dev);
return clk_bulk_prepare_enable(data->num_clks, data->clks);
}
static int cdns_imx_suspend(struct device *dev)
{
struct cdns_imx *data = dev_get_drvdata(dev);
clk_bulk_disable_unprepare(data->num_clks, data->clks);
return 0;
}
#else
static int cdns_imx_platform_suspend(struct device *dev,
bool suspend, bool wakeup)
{
return 0;
}
#endif /* CONFIG_PM */
static const struct dev_pm_ops cdns_imx_pm_ops = {
SET_RUNTIME_PM_OPS(cdns_imx_suspend, cdns_imx_resume, NULL)
};
static const struct of_device_id cdns_imx_of_match[] = {
{ .compatible = "fsl,imx8qm-usb3", },
{},
@ -206,6 +386,7 @@ static struct platform_driver cdns_imx_driver = {
.driver = {
.name = "cdns3-imx",
.of_match_table = cdns_imx_of_match,
.pm = &cdns_imx_pm_ops,
},
};
module_platform_driver(cdns_imx_driver);

204
drivers/usb/cdns3/core.c
View File

@ -280,6 +280,10 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
enum usb_role real_role, current_role;
int ret = 0;
/* Depends on role switch class */
if (cdns->role_sw)
return 0;
pm_runtime_get_sync(cdns->dev);
current_role = cdns->role;
@ -371,6 +375,50 @@ pm_put:
return ret;
}
static int set_phy_power_on(struct cdns3 *cdns)
{
int ret;
ret = phy_power_on(cdns->usb2_phy);
if (ret)
return ret;
ret = phy_power_on(cdns->usb3_phy);
if (ret)
phy_power_off(cdns->usb2_phy);
return ret;
}
static void set_phy_power_off(struct cdns3 *cdns)
{
phy_power_off(cdns->usb3_phy);
phy_power_off(cdns->usb2_phy);
}
/**
* cdns3_wakeup_irq - interrupt handler for wakeup events
* @irq: irq number for cdns3 core device
* @data: structure of cdns3
*
* Returns IRQ_HANDLED or IRQ_NONE
*/
static irqreturn_t cdns3_wakeup_irq(int irq, void *data)
{
struct cdns3 *cdns = data;
if (cdns->in_lpm) {
disable_irq_nosync(irq);
cdns->wakeup_pending = true;
if ((cdns->role == USB_ROLE_HOST) && cdns->host_dev)
pm_request_resume(&cdns->host_dev->dev);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
/**
* cdns3_probe - probe for cdns3 core device
* @pdev: Pointer to cdns3 core platform device
@ -397,6 +445,7 @@ static int cdns3_probe(struct platform_device *pdev)
return -ENOMEM;
cdns->dev = dev;
cdns->pdata = dev_get_platdata(dev);
platform_set_drvdata(pdev, cdns);
@ -443,8 +492,21 @@ static int cdns3_probe(struct platform_device *pdev)
return -ENXIO;
}
cdns->phyrst_a_enable = device_property_read_bool(dev, "cdns,phyrst-a-enable");
cdns->otg_res = *res;
cdns->wakeup_irq = platform_get_irq_byname_optional(pdev, "wakeup");
if (cdns->wakeup_irq == -EPROBE_DEFER)
return cdns->wakeup_irq;
else if (cdns->wakeup_irq == 0)
return -EINVAL;
if (cdns->wakeup_irq < 0) {
dev_dbg(dev, "couldn't get wakeup irq\n");
cdns->wakeup_irq = 0x0;
}
mutex_init(&cdns->mutex);
cdns->usb2_phy = devm_phy_optional_get(dev, "cdns3,usb2-phy");
@ -463,14 +525,10 @@ static int cdns3_probe(struct platform_device *pdev)
if (ret)
goto err1;
ret = phy_power_on(cdns->usb2_phy);
ret = set_phy_power_on(cdns);
if (ret)
goto err2;
ret = phy_power_on(cdns->usb3_phy);
if (ret)
goto err3;
sw_desc.set = cdns3_role_set;
sw_desc.get = cdns3_role_get;
sw_desc.allow_userspace_control = true;
@ -482,20 +540,34 @@ static int cdns3_probe(struct platform_device *pdev)
if (IS_ERR(cdns->role_sw)) {
ret = PTR_ERR(cdns->role_sw);
dev_warn(dev, "Unable to register Role Switch\n");
goto err4;
goto err3;
}
if (cdns->wakeup_irq) {
ret = devm_request_irq(cdns->dev, cdns->wakeup_irq,
cdns3_wakeup_irq,
IRQF_SHARED,
dev_name(cdns->dev), cdns);
if (ret) {
dev_err(cdns->dev, "couldn't register wakeup irq handler\n");
goto err3;
}
}
ret = cdns3_drd_init(cdns);
if (ret)
goto err5;
goto err4;
ret = cdns3_core_init_role(cdns);
if (ret)
goto err5;
goto err4;
spin_lock_init(&cdns->lock);
device_set_wakeup_capable(dev, true);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_forbid(dev);
/*
* The controller needs less time between bus and controller suspend,
@ -508,14 +580,11 @@ static int cdns3_probe(struct platform_device *pdev)
dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
return 0;
err5:
err4:
cdns3_drd_exit(cdns);
usb_role_switch_unregister(cdns->role_sw);
err4:
phy_power_off(cdns->usb3_phy);
err3:
phy_power_off(cdns->usb2_phy);
set_phy_power_off(cdns);
err2:
phy_exit(cdns->usb3_phy);
err1:
@ -539,13 +608,89 @@ static int cdns3_remove(struct platform_device *pdev)
pm_runtime_put_noidle(&pdev->dev);
cdns3_exit_roles(cdns);
usb_role_switch_unregister(cdns->role_sw);
phy_power_off(cdns->usb2_phy);
phy_power_off(cdns->usb3_phy);
set_phy_power_off(cdns);
phy_exit(cdns->usb2_phy);
phy_exit(cdns->usb3_phy);
return 0;
}
#ifdef CONFIG_PM
static int cdns3_set_platform_suspend(struct device *dev,
bool suspend, bool wakeup)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
int ret = 0;
if (cdns->pdata && cdns->pdata->platform_suspend)
ret = cdns->pdata->platform_suspend(dev, suspend, wakeup);
return ret;
}
static int cdns3_controller_suspend(struct device *dev, pm_message_t msg)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
bool wakeup;
unsigned long flags;
if (cdns->in_lpm)
return 0;
if (PMSG_IS_AUTO(msg))
wakeup = true;
else
wakeup = device_may_wakeup(dev);
cdns3_set_platform_suspend(cdns->dev, true, wakeup);
set_phy_power_off(cdns);
spin_lock_irqsave(&cdns->lock, flags);
cdns->in_lpm = true;
spin_unlock_irqrestore(&cdns->lock, flags);
dev_dbg(cdns->dev, "%s ends\n", __func__);
return 0;
}
static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
int ret;
unsigned long flags;
if (!cdns->in_lpm)
return 0;
ret = set_phy_power_on(cdns);
if (ret)
return ret;
cdns3_set_platform_suspend(cdns->dev, false, false);
spin_lock_irqsave(&cdns->lock, flags);
if (cdns->roles[cdns->role]->resume && !PMSG_IS_AUTO(msg))
cdns->roles[cdns->role]->resume(cdns, false);
cdns->in_lpm = false;
spin_unlock_irqrestore(&cdns->lock, flags);
if (cdns->wakeup_pending) {
cdns->wakeup_pending = false;
enable_irq(cdns->wakeup_irq);
}
dev_dbg(cdns->dev, "%s ends\n", __func__);
return ret;
}
static int cdns3_runtime_suspend(struct device *dev)
{
return cdns3_controller_suspend(dev, PMSG_AUTO_SUSPEND);
}
static int cdns3_runtime_resume(struct device *dev)
{
return cdns3_controller_resume(dev, PMSG_AUTO_RESUME);
}
#ifdef CONFIG_PM_SLEEP
static int cdns3_suspend(struct device *dev)
@ -553,45 +698,38 @@ static int cdns3_suspend(struct device *dev)
struct cdns3 *cdns = dev_get_drvdata(dev);
unsigned long flags;
if (cdns->role == USB_ROLE_HOST)
return 0;
if (pm_runtime_status_suspended(dev))
pm_runtime_resume(dev);
if (cdns->roles[cdns->role]->suspend) {
spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
spin_lock_irqsave(&cdns->lock, flags);
cdns->roles[cdns->role]->suspend(cdns, false);
spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
spin_unlock_irqrestore(&cdns->lock, flags);
}
return 0;
return cdns3_controller_suspend(dev, PMSG_SUSPEND);
}
static int cdns3_resume(struct device *dev)
{
struct cdns3 *cdns = dev_get_drvdata(dev);
unsigned long flags;
int ret;
if (cdns->role == USB_ROLE_HOST)
return 0;
if (cdns->roles[cdns->role]->resume) {
spin_lock_irqsave(&cdns->gadget_dev->lock, flags);
cdns->roles[cdns->role]->resume(cdns, false);
spin_unlock_irqrestore(&cdns->gadget_dev->lock, flags);
}
ret = cdns3_controller_resume(dev, PMSG_RESUME);
if (ret)
return ret;
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
return 0;
return ret;
}
#endif
#endif /* CONFIG_PM_SLEEP */
#endif /* CONFIG_PM */
static const struct dev_pm_ops cdns3_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(cdns3_suspend, cdns3_resume)
SET_RUNTIME_PM_OPS(cdns3_runtime_suspend, cdns3_runtime_resume, NULL)
};
#ifdef CONFIG_OF

17
drivers/usb/cdns3/core.h
View File

@ -38,6 +38,12 @@ struct cdns3_role_driver {
};
#define CDNS3_XHCI_RESOURCES_NUM 2
struct cdns3_platform_data {
int (*platform_suspend)(struct device *dev,
bool suspend, bool wakeup);
};
/**
* struct cdns3 - Representation of Cadence USB3 DRD controller.
* @dev: pointer to Cadence device struct
@ -50,6 +56,7 @@ struct cdns3_role_driver {
* @otg_regs: pointer to base of otg registers
* @otg_irq: irq number for otg controller
* @dev_irq: irq number for device controller
* @wakeup_irq: irq number for wakeup event, it is optional
* @roles: array of supported roles for this controller
* @role: current role
* @host_dev: the child host device pointer for cdns3 core
@ -62,6 +69,10 @@ struct cdns3_role_driver {
* This field based on firmware setting, kernel configuration
* and hardware configuration.
* @role_sw: pointer to role switch object.
* @in_lpm: indicate the controller is in low power mode
* @wakeup_pending: wakeup interrupt pending
* @pdata: platform data from glue layer
* @lock: spinlock structure
*/
struct cdns3 {
struct device *dev;
@ -76,9 +87,11 @@ struct cdns3 {
#define CDNS3_CONTROLLER_V0 0
#define CDNS3_CONTROLLER_V1 1
u32 version;
bool phyrst_a_enable;
int otg_irq;
int dev_irq;
int wakeup_irq;
struct cdns3_role_driver *roles[USB_ROLE_DEVICE + 1];
enum usb_role role;
struct platform_device *host_dev;
@ -89,6 +102,10 @@ struct cdns3 {
struct mutex mutex;
enum usb_dr_mode dr_mode;
struct usb_role_switch *role_sw;
bool in_lpm;
bool wakeup_pending;
struct cdns3_platform_data *pdata;
spinlock_t lock;
};
int cdns3_hw_role_switch(struct cdns3 *cdns);

20
drivers/usb/cdns3/drd.c
View File

@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/usb/otg.h>
#include <linux/phy/phy.h>
#include "gadget.h"
#include "drd.h"
@ -42,6 +43,18 @@ int cdns3_set_mode(struct cdns3 *cdns, enum usb_dr_mode mode)
reg = readl(&cdns->otg_v1_regs->override);
reg |= OVERRIDE_IDPULLUP;
writel(reg, &cdns->otg_v1_regs->override);
/*
* Enable work around feature built into the
* controller to address issue with RX Sensitivity
* est (EL_17) for USB2 PHY. The issue only occures
* for 0x0002450D controller version.
*/
if (cdns->phyrst_a_enable) {
reg = readl(&cdns->otg_v1_regs->phyrst_cfg);
reg |= PHYRST_CFG_PHYRST_A_ENABLE;
writel(reg, &cdns->otg_v1_regs->phyrst_cfg);
}
} else {
reg = readl(&cdns->otg_v0_regs->ctrl1);
reg |= OVERRIDE_IDPULLUP_V0;
@ -145,6 +158,7 @@ int cdns3_drd_host_on(struct cdns3 *cdns)
if (ret)
dev_err(cdns->dev, "timeout waiting for xhci_ready\n");
phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_HOST);
return ret;
}
@ -164,6 +178,7 @@ void cdns3_drd_host_off(struct cdns3 *cdns)
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
!(val & OTGSTATE_HOST_STATE_MASK),
1, 2000000);
phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
}
/**
@ -190,6 +205,7 @@ int cdns3_drd_gadget_on(struct cdns3 *cdns)
return ret;
}
phy_set_mode(cdns->usb3_phy, PHY_MODE_USB_DEVICE);
return 0;
}
@ -213,6 +229,7 @@ void cdns3_drd_gadget_off(struct cdns3 *cdns)
readl_poll_timeout_atomic(&cdns->otg_regs->state, val,
!(val & OTGSTATE_DEV_STATE_MASK),
1, 2000000);
phy_set_mode(cdns->usb3_phy, PHY_MODE_INVALID);
}
/**
@ -293,6 +310,9 @@ static irqreturn_t cdns3_drd_irq(int irq, void *data)
if (cdns->dr_mode != USB_DR_MODE_OTG)
return IRQ_NONE;
if (cdns->in_lpm)
return ret;
reg = readl(&cdns->otg_regs->ivect);
if (!reg)

5
drivers/usb/cdns3/drd.h
View File

@ -31,7 +31,7 @@ struct cdns3_otg_regs {
__le32 simulate;
__le32 override;
__le32 susp_ctrl;
__le32 reserved4;
__le32 phyrst_cfg;
__le32 anasts;
__le32 adp_ramp_time;
__le32 ctrl1;
@ -153,6 +153,9 @@ struct cdns3_otg_common_regs {
/* Only for CDNS3_CONTROLLER_V0 version */
#define OVERRIDE_IDPULLUP_V0 BIT(24)
/* PHYRST_CFG - bitmasks */
#define PHYRST_CFG_PHYRST_A_ENABLE BIT(0)
#define CDNS3_ID_PERIPHERAL 1
#define CDNS3_ID_HOST 0

10
drivers/usb/cdns3/ep0.c
View File

@ -717,9 +717,17 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
/* send STATUS stage. Should be called only for SET_CONFIGURATION */
if (priv_dev->ep0_stage == CDNS3_STATUS_STAGE) {
u32 val;
cdns3_select_ep(priv_dev, 0x00);
cdns3_set_hw_configuration(priv_dev);
cdns3_ep0_complete_setup(priv_dev, 0, 1);
/* wait until configuration set */
ret = readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
val & USB_STS_CFGSTS_MASK, 1, 100);
if (ret == -ETIMEDOUT)
dev_warn(priv_dev->dev, "timeout for waiting configuration set\n");
request->actual = 0;
priv_dev->status_completion_no_call = true;
priv_dev->pending_status_request = request;
@ -731,7 +739,7 @@ static int cdns3_gadget_ep0_queue(struct usb_ep *ep,
* ep0_queue is back.
*/
queue_work(system_freezable_wq, &priv_dev->pending_status_wq);
return 0;
return ret;
}
if (!list_empty(&priv_ep->pending_req_list)) {

280
drivers/usb/cdns3/gadget.c
View File

@ -261,8 +261,8 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
*/
link_trb->control = 0;
} else {
link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma);
link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE;
link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma));
link_trb->control = cpu_to_le32(TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE);
}
return 0;
}
@ -462,6 +462,36 @@ static int cdns3_start_all_request(struct cdns3_device *priv_dev,
(reg) |= EP_STS_EN_DESCMISEN; \
} } while (0)
static void __cdns3_descmiss_copy_data(struct usb_request *request,
struct usb_request *descmiss_req)
{
int length = request->actual + descmiss_req->actual;
struct scatterlist *s = request->sg;
if (!s) {
if (length <= request->length) {
memcpy(&((u8 *)request->buf)[request->actual],
descmiss_req->buf,
descmiss_req->actual);
request->actual = length;
} else {
/* It should never occures */
request->status = -ENOMEM;
}
} else {
if (length <= sg_dma_len(s)) {
void *p = phys_to_virt(sg_dma_address(s));
memcpy(&((u8 *)p)[request->actual],
descmiss_req->buf,
descmiss_req->actual);
request->actual = length;
} else {
request->status = -ENOMEM;
}
}
}
/**
* cdns3_wa2_descmiss_copy_data copy data from internal requests to
* request queued by class driver.
@ -488,21 +518,9 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
length = request->actual + descmiss_req->actual;
request->status = descmiss_req->status;
if (length <= request->length) {
memcpy(&((u8 *)request->buf)[request->actual],
descmiss_req->buf,
descmiss_req->actual);
request->actual = length;
} else {
/* It should never occures */
request->status = -ENOMEM;
}
__cdns3_descmiss_copy_data(request, descmiss_req);
list_del_init(&descmiss_priv_req->list);
kfree(descmiss_req->buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
--priv_ep->wa2_counter;
@ -817,6 +835,8 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
request->length);
priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
/* All TRBs have finished, clear the counter */
priv_req->finished_trb = 0;
trace_cdns3_gadget_giveback(priv_req);
if (priv_dev->dev_ver < DEV_VER_V2) {
@ -847,10 +867,10 @@ static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
priv_ep->wa1_trb_index = 0xFFFF;
if (priv_ep->wa1_cycle_bit) {
priv_ep->wa1_trb->control =
priv_ep->wa1_trb->control | 0x1;
priv_ep->wa1_trb->control | cpu_to_le32(0x1);
} else {
priv_ep->wa1_trb->control =
priv_ep->wa1_trb->control & ~0x1;
priv_ep->wa1_trb->control & cpu_to_le32(~0x1);
}
}
}
@ -1008,17 +1028,16 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
TRB_STREAM_ID(priv_req->request.stream_id) | TRB_ISP;
if (!request->num_sgs) {
trb->buffer = TRB_BUFFER(trb_dma);
trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
length = request->length;
} else {
trb->buffer = TRB_BUFFER(request->sg[sg_idx].dma_address);
trb->buffer = cpu_to_le32(TRB_BUFFER(request->sg[sg_idx].dma_address));
length = request->sg[sg_idx].length;
}
tdl = DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket);
trb->length = TRB_BURST_LEN(16 /*priv_ep->trb_burst_size*/) |
TRB_LEN(length);
trb->length = cpu_to_le32(TRB_BURST_LEN(16) | TRB_LEN(length));
/*
* For DEV_VER_V2 controller version we have enabled
@ -1027,11 +1046,11 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
*/
if (priv_dev->dev_ver >= DEV_VER_V2) {
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
trb->length |= TRB_TDL_SS_SIZE(tdl);
trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(tdl));
}
priv_req->flags |= REQUEST_PENDING;
trb->control = control;
trb->control = cpu_to_le32(control);
trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
@ -1091,6 +1110,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
struct cdns3_request *priv_req;
struct cdns3_trb *trb;
struct cdns3_trb *link_trb;
dma_addr_t trb_dma;
u32 togle_pcs = 1;
int sg_iter = 0;
@ -1099,11 +1119,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
u32 control;
int pcs;
u16 total_tdl = 0;
struct scatterlist *s = NULL;
bool sg_supported = !!(request->num_mapped_sgs);
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC)
num_trb = priv_ep->interval;
else
num_trb = request->num_sgs ? request->num_sgs : 1;
num_trb = sg_supported ? request->num_mapped_sgs : 1;
if (num_trb > priv_ep->free_trbs) {
priv_ep->flags |= EP_RING_FULL;
@ -1129,7 +1151,6 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* prepare ring */
if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) {
struct cdns3_trb *link_trb;
int doorbell, dma_index;
u32 ch_bit = 0;
@ -1156,13 +1177,16 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
TRBS_PER_SEGMENT > 2)
ch_bit = TRB_CHAIN;
link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) |
TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit;
link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) |
TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit);
}
if (priv_dev->dev_ver <= DEV_VER_V2)
togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
if (sg_supported)
s = request->sg;
/* set incorrect Cycle Bit for first trb*/
control = priv_ep->pcs ? 0 : TRB_CYCLE;
@ -1172,13 +1196,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* fill TRB */
control |= TRB_TYPE(TRB_NORMAL);
trb->buffer = TRB_BUFFER(request->num_sgs == 0
? trb_dma : request->sg[sg_iter].dma_address);
if (likely(!request->num_sgs))
if (sg_supported) {
trb->buffer = cpu_to_le32(TRB_BUFFER(sg_dma_address(s)));
length = sg_dma_len(s);
} else {
trb->buffer = cpu_to_le32(TRB_BUFFER(trb_dma));
length = request->length;
else
length = request->sg[sg_iter].length;
}
if (likely(priv_dev->dev_ver >= DEV_VER_V2))
td_size = DIV_ROUND_UP(length,
@ -1187,10 +1211,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
total_tdl += DIV_ROUND_UP(length,
priv_ep->endpoint.maxpacket);
trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) |
TRB_LEN(length);
trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) |
TRB_LEN(length));
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
trb->length |= TRB_TDL_SS_SIZE(td_size);
trb->length |= cpu_to_le32(TRB_TDL_SS_SIZE(td_size));
else
control |= TRB_TDL_HS_SIZE(td_size);
@ -1212,9 +1236,18 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
}
if (sg_iter)
trb->control = control;
trb->control = cpu_to_le32(control);
else
priv_req->trb->control = control;
priv_req->trb->control = cpu_to_le32(control);
if (sg_supported) {
trb->control |= TRB_ISP;
/* Don't set chain bit for last TRB */
if (sg_iter < num_trb - 1)
trb->control |= TRB_CHAIN;
s = sg_next(s);
}
control = 0;
++sg_iter;
@ -1226,9 +1259,10 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
trb = priv_req->trb;
priv_req->flags |= REQUEST_PENDING;
priv_req->num_of_trb = num_trb;
if (sg_iter == 1)
trb->control |= TRB_IOC | TRB_ISP;
trb->control |= cpu_to_le32(TRB_IOC | TRB_ISP);
if (priv_dev->dev_ver < DEV_VER_V2 &&
(priv_ep->flags & EP_TDLCHK_EN)) {
@ -1254,12 +1288,27 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
/* give the TD to the consumer*/
if (togle_pcs)
trb->control = trb->control ^ 1;
trb->control = trb->control ^ cpu_to_le32(1);
if (priv_dev->dev_ver <= DEV_VER_V2)
cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
if (num_trb > 1) {
int i = 0;
while (i < num_trb) {
trace_cdns3_prepare_trb(priv_ep, trb + i);
if (trb + i == link_trb) {
trb = priv_ep->trb_pool;
num_trb = num_trb - i;
i = 0;
} else {
i++;
}
}
} else {
trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
}
/*
* Memory barrier - Cycle Bit must be set before trb->length and
@ -1310,7 +1359,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
{
struct cdns3_endpoint *priv_ep;
struct usb_ep *ep;
int val;
if (priv_dev->hw_configured_flag)
return;
@ -1320,10 +1368,6 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
cdns3_set_register_bit(&priv_dev->regs->usb_conf,
USB_CONF_U1EN | USB_CONF_U2EN);
/* wait until configuration set */
readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
val & USB_STS_CFGSTS_MASK, 1, 100);
priv_dev->hw_configured_flag = 1;
list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
@ -1337,7 +1381,7 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
}
/**
* cdns3_request_handled - check whether request has been handled by DMA
* cdns3_trb_handled - check whether trb has been handled by DMA
*
* @priv_ep: extended endpoint object.
* @priv_req: request object for checking
@ -1354,32 +1398,28 @@ void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
* ET = priv_req->end_trb - index of last TRB in transfer ring
* CI = current_index - index of processed TRB by DMA.
*
* As first step, function checks if cycle bit for priv_req->start_trb is
* correct.
* As first step, we check if the TRB between the ST and ET.
* Then, we check if cycle bit for index priv_ep->dequeue
* is correct.
*
* some rules:
* 1. priv_ep->dequeue never exceed current_index.
* 1. priv_ep->dequeue never equals to current_index.
* 2 priv_ep->enqueue never exceed priv_ep->dequeue
* 3. exception: priv_ep->enqueue == priv_ep->dequeue
* and priv_ep->free_trbs is zero.
* This case indicate that TR is full.
*
* Then We can split recognition into two parts:
* At below two cases, the request have been handled.
* Case 1 - priv_ep->dequeue < current_index
* SR ... EQ ... DQ ... CI ... ER
* SR ... DQ ... CI ... EQ ... ER
*
* Request has been handled by DMA if ST and ET is between DQ and CI.
*
* Case 2 - priv_ep->dequeue > current_index
* This situation take place when CI go through the LINK TRB at the end of
* This situation takes place when CI go through the LINK TRB at the end of
* transfer ring.
* SR ... CI ... EQ ... DQ ... ER
*
* Request has been handled by DMA if ET is less then CI or
* ET is greater or equal DQ.
*/
static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
static bool cdns3_trb_handled(struct cdns3_endpoint *priv_ep,
struct cdns3_request *priv_req)
{
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
@ -1391,9 +1431,27 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
trb = &priv_ep->trb_pool[priv_req->start_trb];
/* current trb doesn't belong to this request */
if (priv_req->start_trb < priv_req->end_trb) {
if (priv_ep->dequeue > priv_req->end_trb)
goto finish;
if ((trb->control & TRB_CYCLE) != priv_ep->ccs)
if (priv_ep->dequeue < priv_req->start_trb)
goto finish;
}
if ((priv_req->start_trb > priv_req->end_trb) &&
(priv_ep->dequeue > priv_req->end_trb) &&
(priv_ep->dequeue < priv_req->start_trb))
goto finish;
if ((priv_req->start_trb == priv_req->end_trb) &&
(priv_ep->dequeue != priv_req->end_trb))
goto finish;
trb = &priv_ep->trb_pool[priv_ep->dequeue];
if ((le32_to_cpu(trb->control) & TRB_CYCLE) != priv_ep->ccs)
goto finish;
if (doorbell == 1 && current_index == priv_ep->dequeue)
@ -1413,12 +1471,8 @@ static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
!priv_ep->dequeue)
goto finish;
if (priv_req->end_trb >= priv_ep->dequeue &&
priv_req->end_trb < current_index)
handled = 1;
handled = 1;
} else if (priv_ep->dequeue > current_index) {
if (priv_req->end_trb < current_index ||
priv_req->end_trb >= priv_ep->dequeue)
handled = 1;
}
@ -1434,6 +1488,8 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
struct cdns3_request *priv_req;
struct usb_request *request;
struct cdns3_trb *trb;
bool request_handled = false;
bool transfer_end = false;
while (!list_empty(&priv_ep->pending_req_list)) {
request = cdns3_next_request(&priv_ep->pending_req_list);
@ -1442,7 +1498,7 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
trb = priv_ep->trb_pool + priv_ep->dequeue;
/* Request was dequeued and TRB was changed to TRB_LINK. */
if (TRB_FIELD_TO_TYPE(trb->control) == TRB_LINK) {
if (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) {
trace_cdns3_complete_trb(priv_ep, trb);
cdns3_move_deq_to_next_trb(priv_req);
}
@ -1453,20 +1509,32 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
*/
cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
if (!cdns3_request_handled(priv_ep, priv_req))
while (cdns3_trb_handled(priv_ep, priv_req)) {
priv_req->finished_trb++;
if (priv_req->finished_trb >= priv_req->num_of_trb)
request_handled = true;
trb = priv_ep->trb_pool + priv_ep->dequeue;
trace_cdns3_complete_trb(priv_ep, trb);
if (!transfer_end)
request->actual +=
TRB_LEN(le32_to_cpu(trb->length));
if (priv_req->num_of_trb > 1 &&
le32_to_cpu(trb->control) & TRB_SMM)
transfer_end = true;
cdns3_ep_inc_deq(priv_ep);
}
if (request_handled) {
cdns3_gadget_giveback(priv_ep, priv_req, 0);
request_handled = false;
transfer_end = false;
} else {
goto prepare_next_td;
trb = priv_ep->trb_pool + priv_ep->dequeue;
trace_cdns3_complete_trb(priv_ep, trb);
if (trb != priv_req->trb)
dev_warn(priv_dev->dev,
"request_trb=0x%p, queue_trb=0x%p\n",
priv_req->trb, trb);
request->actual = TRB_LEN(le32_to_cpu(trb->length));
cdns3_move_deq_to_next_trb(priv_req);
cdns3_gadget_giveback(priv_ep, priv_req, 0);
}
if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
TRBS_PER_SEGMENT == 2)
@ -1574,7 +1642,7 @@ static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
* that host ignore the ERDY packet and driver has to send it
* again.
*/
if (tdl && (dbusy | !EP_STS_BUFFEMPTY(ep_sts_reg) |
if (tdl && (dbusy || !EP_STS_BUFFEMPTY(ep_sts_reg) ||
EP_STS_HOSTPP(ep_sts_reg))) {
writel(EP_CMD_ERDY |
EP_CMD_ERDY_SID(priv_ep->last_stream_id),
@ -1769,9 +1837,13 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
{
struct cdns3_device *priv_dev = data;
struct cdns3 *cdns = dev_get_drvdata(priv_dev->dev);
irqreturn_t ret = IRQ_NONE;
u32 reg;
if (cdns->in_lpm)
return ret;
/* check USB device interrupt */
reg = readl(&priv_dev->regs->usb_ists);
if (reg) {
@ -2552,10 +2624,10 @@ found:
/* Update ring only if removed request is on pending_req_list list */
if (req_on_hw_ring && link_trb) {
link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
((priv_req->end_trb + 1) * TRB_SIZE));
link_trb->control = (link_trb->control & TRB_CYCLE) |
TRB_TYPE(TRB_LINK) | TRB_CHAIN;
link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma +
((priv_req->end_trb + 1) * TRB_SIZE)));
link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) |
TRB_TYPE(TRB_LINK) | TRB_CHAIN);
if (priv_ep->wa1_trb == priv_req->trb)
cdns3_wa1_restore_cycle_bit(priv_ep);
@ -2610,7 +2682,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
priv_req = to_cdns3_request(request);
trb = priv_req->trb;
if (trb)
trb->control = trb->control ^ TRB_CYCLE;
trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
}
writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
@ -2625,7 +2697,8 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
if (request) {
if (trb)
trb->control = trb->control ^ TRB_CYCLE;
trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
cdns3_rearm_transfer(priv_ep, 1);
}
@ -2735,10 +2808,13 @@ static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
{
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
if (is_on)
if (is_on) {
writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
else
} else {
writel(~0, &priv_dev->regs->ep_ists);
writel(~0, &priv_dev->regs->usb_ists);
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
}
return 0;
}
@ -2779,6 +2855,8 @@ static void cdns3_gadget_config(struct cdns3_device *priv_dev)
/* enable generic interrupt*/
writel(USB_IEN_INIT, &regs->usb_ien);
writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, &regs->usb_conf);
/* keep Fast Access bit */
writel(PUSB_PWR_FST_REG_ACCESS, &priv_dev->regs->usb_pwr);
cdns3_configure_dmult(priv_dev, NULL);
}
@ -2862,6 +2940,7 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
/* disable interrupt for device */
writel(0, &priv_dev->regs->usb_ien);
writel(0, &priv_dev->regs->usb_pwr);
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
return 0;
@ -2984,18 +3063,26 @@ err:
return -ENOMEM;
}
static void cdns3_gadget_release(struct device *dev)
{
struct cdns3_device *priv_dev = container_of(dev,
struct cdns3_device, gadget.dev);
kfree(priv_dev);
}
void cdns3_gadget_exit(struct cdns3 *cdns)
{
struct cdns3_device *priv_dev;
priv_dev = cdns->gadget_dev;
devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
pm_runtime_mark_last_busy(cdns->dev);
pm_runtime_put_autosuspend(cdns->dev);
usb_del_gadget_udc(&priv_dev->gadget);
usb_del_gadget(&priv_dev->gadget);
devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
cdns3_free_all_eps(priv_dev);
@ -3015,7 +3102,7 @@ void cdns3_gadget_exit(struct cdns3 *cdns)
priv_dev->setup_dma);
kfree(priv_dev->zlp_buf);
kfree(priv_dev);
usb_put_gadget(&priv_dev->gadget);
cdns->gadget_dev = NULL;
cdns3_drd_gadget_off(cdns);
}
@ -3030,6 +3117,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
if (!priv_dev)
return -ENOMEM;
usb_initialize_gadget(cdns->dev, &priv_dev->gadget,
cdns3_gadget_release);
cdns->gadget_dev = priv_dev;
priv_dev->sysdev = cdns->dev;
priv_dev->dev = cdns->dev;
@ -3070,7 +3159,6 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
priv_dev->gadget.ops = &cdns3_gadget_ops;
priv_dev->gadget.name = "usb-ss-gadget";
priv_dev->gadget.sg_supported = 1;
priv_dev->gadget.quirk_avoids_skb_reserve = 1;
priv_dev->gadget.irq = cdns->dev_irq;
@ -3109,6 +3197,8 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
readl(&priv_dev->regs->usb_cap2));
priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
if (priv_dev->dev_ver >= DEV_VER_V2)
priv_dev->gadget.sg_supported = 1;
priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
if (!priv_dev->zlp_buf) {
@ -3117,10 +3207,9 @@ static int cdns3_gadget_start(struct cdns3 *cdns)
}
/* add USB gadget device */
ret = usb_add_gadget_udc(priv_dev->dev, &priv_dev->gadget);
ret = usb_add_gadget(&priv_dev->gadget);
if (ret < 0) {
dev_err(priv_dev->dev,
"Failed to register USB device controller\n");
dev_err(priv_dev->dev, "Failed to add gadget\n");
goto err4;
}
@ -3133,6 +3222,7 @@ err3:
err2:
cdns3_free_all_eps(priv_dev);
err1:
usb_put_gadget(&priv_dev->gadget);
cdns->gadget_dev = NULL;
return ret;
}

11
drivers/usb/cdns3/gadget.h
View File

@ -966,7 +966,7 @@ struct cdns3_usb_regs {
/*
* USBSS-DEV DMA interface.
*/
#define TRBS_PER_SEGMENT 40
#define TRBS_PER_SEGMENT 600
#define ISO_MAX_INTERVAL 10
@ -1030,6 +1030,11 @@ struct cdns3_trb {
* When set to '1', the device will toggle its interpretation of the Cycle bit
*/
#define TRB_TOGGLE BIT(1)
/*
* The controller will set it if OUTSMM (OUT size mismatch) is detected,
* this bit is for normal TRB
*/
#define TRB_SMM BIT(1)
/*
* Short Packet (SP). OUT EPs at DMULT=1 only. Indicates if the TRB was
@ -1215,6 +1220,8 @@ struct cdns3_aligned_buf {
* this endpoint
* @flags: flag specifying special usage of request
* @list: used by internally allocated request to add to wa2_descmiss_req_list.
* @finished_trb: number of trb has already finished per request
* @num_of_trb: how many trbs in this request
*/
struct cdns3_request {
struct usb_request request;
@ -1230,6 +1237,8 @@ struct cdns3_request {
#define REQUEST_UNALIGNED BIT(4)
u32 flags;
struct list_head list;
int finished_trb;
int num_of_trb;
};
#define to_cdns3_request(r) (container_of(r, struct cdns3_request, request))

7
drivers/usb/cdns3/host.c
View File

@ -13,11 +13,13 @@
#include "core.h"
#include "drd.h"
#include "host-export.h"
#include <linux/usb/hcd.h>
static int __cdns3_host_init(struct cdns3 *cdns)
{
struct platform_device *xhci;
int ret;
struct usb_hcd *hcd;
cdns3_drd_host_on(cdns);
@ -43,6 +45,11 @@ static int __cdns3_host_init(struct cdns3 *cdns)
goto err1;
}
/* Glue needs to access xHCI region register for Power management */
hcd = platform_get_drvdata(xhci);
if (hcd)
cdns->xhci_regs = hcd->regs;
return 0;
err1:
platform_device_put(xhci);

1
drivers/usb/dwc2/Kconfig
View File

@ -5,6 +5,7 @@ config USB_DWC2
depends on HAS_DMA
depends on USB || USB_GADGET
depends on HAS_IOMEM
select USB_ROLE_SWITCH
help
Say Y here if your system has a Dual Role Hi-Speed USB
controller based on the DesignWare HSOTG IP Core.

2
drivers/usb/dwc2/Makefile
View File

@ -3,7 +3,7 @@ ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG
ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG
obj-$(CONFIG_USB_DWC2) += dwc2.o
dwc2-y := core.o core_intr.o platform.o
dwc2-y := core.o core_intr.o platform.o drd.o
dwc2-y += params.o
ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)

9
drivers/usb/dwc2/core.h
View File

@ -860,6 +860,7 @@ struct dwc2_hregs_backup {
* - USB_DR_MODE_PERIPHERAL
* - USB_DR_MODE_HOST
* - USB_DR_MODE_OTG
* @role_sw: usb_role_switch handle
* @hcd_enabled: Host mode sub-driver initialization indicator.
* @gadget_enabled: Peripheral mode sub-driver initialization indicator.
* @ll_hw_enabled: Status of low-level hardware resources.
@ -1054,6 +1055,7 @@ struct dwc2_hsotg {
struct dwc2_core_params params;
enum usb_otg_state op_state;
enum usb_dr_mode dr_mode;
struct usb_role_switch *role_sw;
unsigned int hcd_enabled:1;
unsigned int gadget_enabled:1;
unsigned int ll_hw_enabled:1;
@ -1376,6 +1378,11 @@ static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
}
int dwc2_drd_init(struct dwc2_hsotg *hsotg);
void dwc2_drd_suspend(struct dwc2_hsotg *hsotg);
void dwc2_drd_resume(struct dwc2_hsotg *hsotg);
void dwc2_drd_exit(struct dwc2_hsotg *hsotg);
/*
* Dump core registers and SPRAM
*/
@ -1392,6 +1399,7 @@ int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
int dwc2_gadget_init(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset);
void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
@ -1417,6 +1425,7 @@ static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg)
{ return 0; }
static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
bool reset) {}
static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,

180
drivers/usb/dwc2/drd.c Normal file
View File

@ -0,0 +1,180 @@
// SPDX-License-Identifier: GPL-2.0
/*
* drd.c - DesignWare USB2 DRD Controller Dual-role support
*
* Copyright (C) 2020 STMicroelectronics
*
* Author(s): Amelie Delaunay <amelie.delaunay@st.com>
*/
#include <linux/iopoll.h>
#include <linux/platform_device.h>
#include <linux/usb/role.h>
#include "core.h"
static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
{
unsigned long flags;
u32 gotgctl;
spin_lock_irqsave(&hsotg->lock, flags);
gotgctl = dwc2_readl(hsotg, GOTGCTL);
gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN;
gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
dwc2_writel(hsotg, gotgctl, GOTGCTL);
dwc2_force_mode(hsotg, false);
spin_unlock_irqrestore(&hsotg->lock, flags);
}
static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
{
u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
/* Check if A-Session is already in the right state */
if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
(!valid && !(gotgctl & GOTGCTL_ASESVLD)))
return -EALREADY;
if (valid)
gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
else
gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
dwc2_writel(hsotg, gotgctl, GOTGCTL);
return 0;
}
static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
{
u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
/* Check if B-Session is already in the right state */
if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
(!valid && !(gotgctl & GOTGCTL_BSESVLD)))
return -EALREADY;
if (valid)
gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
else
gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
dwc2_writel(hsotg, gotgctl, GOTGCTL);
return 0;
}
static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
{
struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
unsigned long flags;
int already = 0;
/* Skip session not in line with dr_mode */
if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
(role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
return -EINVAL;
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
/* Skip session if core is in test mode */
if (role == USB_ROLE_NONE && hsotg->test_mode) {
dev_dbg(hsotg->dev, "Core is in test mode\n");
return -EBUSY;
}
#endif
spin_lock_irqsave(&hsotg->lock, flags);
if (role == USB_ROLE_HOST) {
already = dwc2_ovr_avalid(hsotg, true);
} else if (role == USB_ROLE_DEVICE) {
already = dwc2_ovr_bvalid(hsotg, true);
/* This clear DCTL.SFTDISCON bit */
dwc2_hsotg_core_connect(hsotg);
} else {
if (dwc2_is_device_mode(hsotg)) {
if (!dwc2_ovr_bvalid(hsotg, false))
/* This set DCTL.SFTDISCON bit */
dwc2_hsotg_core_disconnect(hsotg);
} else {
dwc2_ovr_avalid(hsotg, false);
}
}
spin_unlock_irqrestore(&hsotg->lock, flags);
if (!already && hsotg->dr_mode == USB_DR_MODE_OTG)
/* This will raise a Connector ID Status Change Interrupt */
dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
dev_dbg(hsotg->dev, "%s-session valid\n",
role == USB_ROLE_NONE ? "No" :
role == USB_ROLE_HOST ? "A" : "B");
return 0;
}
int dwc2_drd_init(struct dwc2_hsotg *hsotg)
{
struct usb_role_switch_desc role_sw_desc = {0};
struct usb_role_switch *role_sw;
int ret;
if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
return 0;
role_sw_desc.driver_data = hsotg;
role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
role_sw_desc.set = dwc2_drd_role_sw_set;
role_sw_desc.allow_userspace_control = true;
role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
if (IS_ERR(role_sw)) {
ret = PTR_ERR(role_sw);
dev_err(hsotg->dev,
"failed to register role switch: %d\n", ret);
return ret;
}
hsotg->role_sw = role_sw;
/* Enable override and initialize values */
dwc2_ovr_init(hsotg);
return 0;
}
void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
{
u32 gintsts, gintmsk;
if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
gintmsk = dwc2_readl(hsotg, GINTMSK);
gintmsk &= ~GINTSTS_CONIDSTSCHNG;
dwc2_writel(hsotg, gintmsk, GINTMSK);
gintsts = dwc2_readl(hsotg, GINTSTS);
dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
}
}
void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
{
u32 gintsts, gintmsk;
if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
gintsts = dwc2_readl(hsotg, GINTSTS);
dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
gintmsk = dwc2_readl(hsotg, GINTMSK);
gintmsk |= GINTSTS_CONIDSTSCHNG;
dwc2_writel(hsotg, gintmsk, GINTMSK);
}
}
void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
{
if (hsotg->role_sw)
usb_role_switch_unregister(hsotg->role_sw);
}

42
drivers/usb/dwc2/gadget.c
View File

@ -713,8 +713,11 @@ static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
*/
static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
{
const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
int is_isoc = hs_ep->isochronous;
unsigned int maxsize;
u32 mps = hs_ep->ep.maxpacket;
int dir_in = hs_ep->dir_in;
if (is_isoc)
maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT :
@ -723,6 +726,11 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
else
maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC;
/* Interrupt OUT EP with mps not multiple of 4 */
if (hs_ep->index)
if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
maxsize = mps * MAX_DMA_DESC_NUM_GENERIC;
return maxsize;
}
@ -738,11 +746,14 @@ static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep)
* Isochronous - descriptor rx/tx bytes bitfield limit,
* Control In/Bulk/Interrupt - multiple of mps. This will allow to not
* have concatenations from various descriptors within one packet.
* Interrupt OUT - if mps not multiple of 4 then a single packet corresponds
* to a single descriptor.
*
* Selects corresponding mask for RX/TX bytes as well.
*/
static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
{
const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
u32 mps = hs_ep->ep.maxpacket;
int dir_in = hs_ep->dir_in;
u32 desc_size = 0;
@ -766,6 +777,13 @@ static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask)
desc_size -= desc_size % mps;
}
/* Interrupt OUT EP with mps not multiple of 4 */
if (hs_ep->index)
if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) {
desc_size = mps;
*mask = DEV_DMA_NBYTES_MASK;
}
return desc_size;
}
@ -1123,13 +1141,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
length += (mps - (length % mps));
}
/*
* If more data to send, adjust DMA for EP0 out data stage.
* ureq->dma stays unchanged, hence increment it by already
* passed passed data count before starting new transaction.
*/
if (!index && hsotg->ep0_state == DWC2_EP0_DATA_OUT &&
continuing)
if (continuing)
offset = ureq->actual;
/* Fill DDMA chain entries */
@ -2320,22 +2332,36 @@ static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
*/
static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep)
{
const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc;
struct dwc2_hsotg *hsotg = hs_ep->parent;
unsigned int bytes_rem = 0;
unsigned int bytes_rem_correction = 0;
struct dwc2_dma_desc *desc = hs_ep->desc_list;
int i;
u32 status;
u32 mps = hs_ep->ep.maxpacket;
int dir_in = hs_ep->dir_in;
if (!desc)
return -EINVAL;
/* Interrupt OUT EP with mps not multiple of 4 */
if (hs_ep->index)
if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4))
bytes_rem_correction = 4 - (mps % 4);
for (i = 0; i < hs_ep->desc_count; ++i) {
status = desc->status;
bytes_rem += status & DEV_DMA_NBYTES_MASK;
bytes_rem -= bytes_rem_correction;
if (status & DEV_DMA_STS_MASK)
dev_err(hsotg->dev, "descriptor %d closed with %x\n",
i, status & DEV_DMA_STS_MASK);
if (status & DEV_DMA_L)
break;
desc++;
}
@ -3530,7 +3556,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
dwc2_readl(hsotg, DOEPCTL0));
}
static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
{
/* set the soft-disconnect bit */
dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON);

5
drivers/usb/dwc2/params.c
View File

@ -185,7 +185,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
struct dwc2_core_params *p = &hsotg->params;
p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
p->activate_stm_id_vb_detection = true;
p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
p->host_perio_tx_fifo_size = 256;
@ -210,6 +210,7 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "amlogic,meson-g12a-usb",
.data = dwc2_set_amlogic_g12a_params },
{ .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params },
{ .compatible = "st,stm32f4x9-fsotg",
.data = dwc2_set_stm32f4x9_fsotg_params },
{ .compatible = "st,stm32f4x9-hsotg" },
@ -860,7 +861,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
int dwc2_init_params(struct dwc2_hsotg *hsotg)
{
const struct of_device_id *match;
void (*set_params)(void *data);
void (*set_params)(struct dwc2_hsotg *data);
dwc2_set_default_params(hsotg);
dwc2_get_device_properties(hsotg);

26
drivers/usb/dwc2/platform.c
View File

@ -323,6 +323,8 @@ static int dwc2_driver_remove(struct platform_device *dev)
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
dwc2_drd_exit(hsotg);
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
@ -542,10 +544,17 @@ static int dwc2_driver_probe(struct platform_device *dev)
dwc2_writel(hsotg, ggpio, GGPIO);
}
retval = dwc2_drd_init(hsotg);
if (retval) {
if (retval != -EPROBE_DEFER)
dev_err(hsotg->dev, "failed to initialize dual-role\n");
goto error_init;
}
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
goto error_init;
goto error_drd;
hsotg->gadget_enabled = 1;
}
@ -571,7 +580,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
goto error_init;
goto error_drd;
}
hsotg->hcd_enabled = 1;
}
@ -593,12 +602,19 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval) {
hsotg->gadget.udc = NULL;
dwc2_hsotg_remove(hsotg);
goto error_init;
goto error_debugfs;
}
}
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
return 0;
error_debugfs:
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
error_drd:
dwc2_drd_exit(hsotg);
error_init:
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
@ -617,6 +633,8 @@ static int __maybe_unused dwc2_suspend(struct device *dev)
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
dwc2_drd_suspend(dwc2);
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
@ -697,6 +715,8 @@ static int __maybe_unused dwc2_resume(struct device *dev)
/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
dwc2_force_dr_mode(dwc2);
dwc2_drd_resume(dwc2);
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);

90
drivers/usb/dwc3/core.c
View File

@ -119,9 +119,7 @@ static void __dwc3_set_mode(struct work_struct *work)
struct dwc3 *dwc = work_to_dwc(work);
unsigned long flags;
int ret;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
u32 reg;
pm_runtime_get_sync(dwc->dev);
@ -172,6 +170,11 @@ static void __dwc3_set_mode(struct work_struct *work)
otg_set_vbus(dwc->usb2_phy->otg, true);
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
if (dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
}
}
break;
case DWC3_GCTL_PRTCAP_DEVICE:
@ -203,6 +206,9 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
{
unsigned long flags;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return;
spin_lock_irqsave(&dwc->lock, flags);
dwc->desired_dr_role = mode;
spin_unlock_irqrestore(&dwc->lock, flags);
@ -929,13 +935,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
/* Handle USB2.0-only core configuration */
if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
if (dwc->maximum_speed == USB_SPEED_SUPER)
dwc->maximum_speed = USB_SPEED_HIGH;
}
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
@ -1356,6 +1355,9 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
dwc->dis_split_quirk = device_property_read_bool(dev,
"snps,dis-split-quirk");
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
@ -1381,6 +1383,8 @@ bool dwc3_has_imod(struct dwc3 *dwc)
static void dwc3_check_params(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
unsigned int hwparam_gen =
DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
/* Check for proper value of imod_interval */
if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
@ -1404,25 +1408,40 @@ static void dwc3_check_params(struct dwc3 *dwc)
case USB_SPEED_LOW:
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
break;
case USB_SPEED_SUPER:
if (hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS)
dev_warn(dev, "UDC doesn't support Gen 1\n");
break;
case USB_SPEED_SUPER_PLUS:
if ((DWC3_IP_IS(DWC32) &&
hwparam_gen == DWC3_GHWPARAMS3_SSPHY_IFC_DIS) ||
(!DWC3_IP_IS(DWC32) &&
hwparam_gen != DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
dev_warn(dev, "UDC doesn't support SSP\n");
break;
default:
dev_err(dev, "invalid maximum_speed parameter %d\n",
dwc->maximum_speed);
fallthrough;
case USB_SPEED_UNKNOWN:
/* default to superspeed */
dwc->maximum_speed = USB_SPEED_SUPER;
/*
* default to superspeed plus if we are capable.
*/
if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) &&
(DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
switch (hwparam_gen) {
case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
break;
case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
if (DWC3_IP_IS(DWC32))
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
else
dwc->maximum_speed = USB_SPEED_SUPER;
break;
case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
dwc->maximum_speed = USB_SPEED_HIGH;
break;
default:
dwc->maximum_speed = USB_SPEED_SUPER;
break;
}
break;
}
}
@ -1554,6 +1573,17 @@ static int dwc3_probe(struct platform_device *pdev)
err5:
dwc3_event_buffers_cleanup(dwc);
usb_phy_shutdown(dwc->usb2_phy);
usb_phy_shutdown(dwc->usb3_phy);
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
usb_phy_set_suspend(dwc->usb2_phy, 1);
usb_phy_set_suspend(dwc->usb3_phy, 1);
phy_power_off(dwc->usb2_generic_phy);
phy_power_off(dwc->usb3_generic_phy);
dwc3_ulpi_exit(dwc);
err4:
@ -1589,9 +1619,9 @@ static int dwc3_remove(struct platform_device *pdev)
dwc3_core_exit(dwc);
dwc3_ulpi_exit(dwc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_allow(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
dwc3_free_event_buffers(dwc);
dwc3_free_scratch_buffers(dwc);
@ -1865,10 +1895,26 @@ static int dwc3_resume(struct device *dev)
return 0;
}
static void dwc3_complete(struct device *dev)
{
struct dwc3 *dwc = dev_get_drvdata(dev);
u32 reg;
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST &&
dwc->dis_split_quirk) {
reg = dwc3_readl(dwc->regs, DWC3_GUCTL3);
reg |= DWC3_GUCTL3_SPLITDISABLE;
dwc3_writel(dwc->regs, DWC3_GUCTL3, reg);
}
}
#else
#define dwc3_complete NULL
#endif /* CONFIG_PM_SLEEP */
static const struct dev_pm_ops dwc3_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
.complete = dwc3_complete,
SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
dwc3_runtime_idle)
};

47
drivers/usb/dwc3/core.h
View File

@ -138,6 +138,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
#define DWC3_GHWPARAMS8 0xc600
#define DWC3_GUCTL3 0xc60c
#define DWC3_GFLADJ 0xc630
/* Device Registers */
@ -380,6 +381,9 @@
/* Global User Control Register 2 */
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
/* Global User Control Register 3 */
#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@ -634,7 +638,7 @@ struct dwc3_trb;
struct dwc3_event_buffer {
void *buf;
void *cache;
unsigned length;
unsigned int length;
unsigned int lpos;
unsigned int count;
unsigned int flags;
@ -694,7 +698,7 @@ struct dwc3_ep {
struct dwc3 *dwc;
u32 saved_state;
unsigned flags;
unsigned int flags;
#define DWC3_EP_ENABLED BIT(0)
#define DWC3_EP_STALL BIT(1)
#define DWC3_EP_WEDGE BIT(2)
@ -706,6 +710,7 @@ struct dwc3_ep {
#define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8)
#define DWC3_EP_FORCE_RESTART_STREAM BIT(9)
#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10)
#define DWC3_EP_PENDING_CLEAR_STALL BIT(11)
/* This last one is specific to EP0 */
#define DWC3_EP0_DIR_IN BIT(31)
@ -893,9 +898,9 @@ struct dwc3_request {
struct scatterlist *sg;
struct scatterlist *start_sg;
unsigned num_pending_sgs;
unsigned int num_pending_sgs;
unsigned int num_queued_sgs;
unsigned remaining;
unsigned int remaining;
unsigned int status;
#define DWC3_REQUEST_STATUS_QUEUED 0
@ -908,11 +913,11 @@ struct dwc3_request {
struct dwc3_trb *trb;
dma_addr_t trb_dma;
unsigned num_trbs;
unsigned int num_trbs;
unsigned needs_extra_trb:1;
unsigned direction:1;
unsigned mapped:1;
unsigned int needs_extra_trb:1;
unsigned int direction:1;
unsigned int mapped:1;
};
/*
@ -1010,8 +1015,8 @@ struct dwc3_scratchpad_array {
* @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
* there's now way for software to detect this in runtime.
* @is_utmi_l1_suspend: the core asserts output signal
* 0 - utmi_sleep_n
* 1 - utmi_l1_suspend_n
* 0 - utmi_sleep_n
* 1 - utmi_l1_suspend_n
* @is_fpga: true when we are using the FPGA board
* @pending_events: true when we have pending IRQs to be handled
* @pullups_connected: true when Run/Stop bit is set
@ -1047,13 +1052,14 @@ struct dwc3_scratchpad_array {
* instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
* 1 - -3.5dB de-emphasis
* 2 - No de-emphasis
* 3 - Reserved
* 0 - -6dB de-emphasis
* 1 - -3.5dB de-emphasis
* 2 - No de-emphasis
* 3 - Reserved
* @dis_metastability_quirk: set to disable metastability quirk.
* @dis_split_quirk: set to disable split boundary.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
* increments or 0 to disable.
*/
struct dwc3 {
struct work_struct drd_work;
@ -1079,7 +1085,7 @@ struct dwc3 {
struct dwc3_event_buffer *ev_buf;
struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
struct usb_gadget gadget;
struct usb_gadget *gadget;
struct usb_gadget_driver *gadget_driver;
struct clk_bulk_data *clks;
@ -1245,6 +1251,8 @@ struct dwc3 {
unsigned dis_metastability_quirk:1;
unsigned dis_split_quirk:1;
u16 imod_interval;
};
@ -1456,9 +1464,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc);
int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
int dwc3_gadget_get_link_state(struct dwc3 *dwc);
int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params);
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
u32 param);
#else
static inline int dwc3_gadget_init(struct dwc3 *dwc)
{ return 0; }
@ -1472,7 +1481,7 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
enum dwc3_link_state state)
{ return 0; }
static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
struct dwc3_gadget_ep_cmd_params *params)
{ return 0; }
static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,

8
drivers/usb/dwc3/debug.h
View File

@ -371,7 +371,9 @@ static inline const char *dwc3_gadget_event_type_string(u8 event)
static inline const char *dwc3_decode_event(char *str, size_t size, u32 event,
u32 ep0state)
{
const union dwc3_event evt = (union dwc3_event) event;
union dwc3_event evt;
memcpy(&evt, &event, sizeof(event));
if (evt.type.is_devspec)
return dwc3_gadget_event_string(str, size, &evt.devt);
@ -411,8 +413,8 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
#ifdef CONFIG_DEBUG_FS
extern void dwc3_debugfs_init(struct dwc3 *);
extern void dwc3_debugfs_exit(struct dwc3 *);
extern void dwc3_debugfs_init(struct dwc3 *d);
extern void dwc3_debugfs_exit(struct dwc3 *d);
#else
static inline void dwc3_debugfs_init(struct dwc3 *d)
{ }

59
drivers/usb/dwc3/debugfs.c
View File

@ -397,13 +397,13 @@ static int dwc3_mode_show(struct seq_file *s, void *unused)
switch (DWC3_GCTL_PRTCAP(reg)) {
case DWC3_GCTL_PRTCAP_HOST:
seq_printf(s, "host\n");
seq_puts(s, "host\n");
break;
case DWC3_GCTL_PRTCAP_DEVICE:
seq_printf(s, "device\n");
seq_puts(s, "device\n");
break;
case DWC3_GCTL_PRTCAP_OTG:
seq_printf(s, "otg\n");
seq_puts(s, "otg\n");
break;
default:
seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg));
@ -428,6 +428,9 @@ static ssize_t dwc3_mode_write(struct file *file,
if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
return -EFAULT;
if (dwc->dr_mode != USB_DR_MODE_OTG)
return count;
if (!strncmp(buf, "host", 4))
mode = DWC3_GCTL_PRTCAP_HOST;
@ -464,22 +467,22 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused)
switch (reg) {
case 0:
seq_printf(s, "no test\n");
seq_puts(s, "no test\n");
break;
case USB_TEST_J:
seq_printf(s, "test_j\n");
seq_puts(s, "test_j\n");
break;
case USB_TEST_K:
seq_printf(s, "test_k\n");
seq_puts(s, "test_k\n");
break;
case USB_TEST_SE0_NAK:
seq_printf(s, "test_se0_nak\n");
seq_puts(s, "test_se0_nak\n");
break;
case USB_TEST_PACKET:
seq_printf(s, "test_packet\n");
seq_puts(s, "test_packet\n");
break;
case USB_TEST_FORCE_ENABLE:
seq_printf(s, "test_force_enable\n");
seq_puts(s, "test_force_enable\n");
break;
default:
seq_printf(s, "UNKNOWN %d\n", reg);
@ -760,27 +763,26 @@ static int dwc3_transfer_type_show(struct seq_file *s, void *unused)
unsigned long flags;
spin_lock_irqsave(&dwc->lock, flags);
if (!(dep->flags & DWC3_EP_ENABLED) ||
!dep->endpoint.desc) {
seq_printf(s, "--\n");
if (!(dep->flags & DWC3_EP_ENABLED) || !dep->endpoint.desc) {
seq_puts(s, "--\n");
goto out;
}
switch (usb_endpoint_type(dep->endpoint.desc)) {
case USB_ENDPOINT_XFER_CONTROL:
seq_printf(s, "control\n");
seq_puts(s, "control\n");
break;
case USB_ENDPOINT_XFER_ISOC:
seq_printf(s, "isochronous\n");
seq_puts(s, "isochronous\n");
break;
case USB_ENDPOINT_XFER_BULK:
seq_printf(s, "bulk\n");
seq_puts(s, "bulk\n");
break;
case USB_ENDPOINT_XFER_INT:
seq_printf(s, "interrupt\n");
seq_puts(s, "interrupt\n");
break;
default:
seq_printf(s, "--\n");
seq_puts(s, "--\n");
}
out:
@ -798,11 +800,11 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused)
spin_lock_irqsave(&dwc->lock, flags);
if (dep->number <= 1) {
seq_printf(s, "--\n");
seq_puts(s, "--\n");
goto out;
}
seq_printf(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n");
seq_puts(s, "buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo\n");
for (i = 0; i < DWC3_TRB_NUM; i++) {
struct dwc3_trb *trb = &dep->trb_pool[i];
@ -884,7 +886,7 @@ static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep,
const struct file_operations *fops = dwc3_ep_file_map[i].fops;
const char *name = dwc3_ep_file_map[i].name;
debugfs_create_file(name, S_IRUGO, parent, dep, fops);
debugfs_create_file(name, 0444, parent, dep, fops);
}
}
@ -929,21 +931,18 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root);
dwc->root = root;
debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
debugfs_create_regset32("regdump", 0444, root, dwc->regset);
debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops);
debugfs_create_file("lsp_dump", S_IRUGO | S_IWUSR, root, dwc,
&dwc3_lsp_fops);
if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)) {
debugfs_create_file("mode", S_IRUGO | S_IWUSR, root, dwc,
if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE))
debugfs_create_file("mode", 0644, root, dwc,
&dwc3_mode_fops);
}
if (IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) ||
IS_ENABLED(CONFIG_USB_DWC3_GADGET)) {
debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, dwc,
&dwc3_testmode_fops);
debugfs_create_file("link_state", S_IRUGO | S_IWUSR, root, dwc,
debugfs_create_file("testmode", 0644, root, dwc,
&dwc3_testmode_fops);
debugfs_create_file("link_state", 0644, root, dwc,
&dwc3_link_state_fops);
dwc3_debugfs_create_endpoint_dirs(dwc, root);
}

41
drivers/usb/dwc3/dwc3-meson-g12a.c
View File

@ -116,23 +116,24 @@ static struct clk_bulk_data meson_a1_clocks[] = {
{ .id = "xtal_usb_ctrl" },
};
static const char *meson_gxm_phy_names[] = {
static const char * const meson_gxm_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb2-phy2",
};
static const char *meson_g12a_phy_names[] = {
static const char * const meson_g12a_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
/*
* Amlogic A1 has a single physical PHY, in slot 1, but still has the
* two U2 PHY controls register blocks like G12A.
* AXG has the similar scheme, thus needs the same tweak.
* Handling the first PHY on slot 1 would need a large amount of code
* changes, and the current management is generic enough to handle it
* correctly when only the "usb2-phy1" phy is specified on-par with the
* DT bindings.
*/
static const char *meson_a1_phy_names[] = {
static const char * const meson_a1_phy_names[] = {
"usb2-phy0", "usb2-phy1"
};
@ -143,7 +144,7 @@ struct dwc3_meson_g12a_drvdata {
bool otg_phy_host_port_disable;
struct clk_bulk_data *clks;
int num_clks;
const char **phy_names;
const char * const *phy_names;
int num_phys;
int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base);
int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i,
@ -215,6 +216,19 @@ static struct dwc3_meson_g12a_drvdata gxm_drvdata = {
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
static struct dwc3_meson_g12a_drvdata axg_drvdata = {
.otg_switch_supported = true,
.clks = meson_gxl_clocks,
.num_clks = ARRAY_SIZE(meson_gxl_clocks),
.phy_names = meson_a1_phy_names,
.num_phys = ARRAY_SIZE(meson_a1_phy_names),
.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
.usb_init = dwc3_meson_g12a_usb_init,
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.otg_switch_supported = true,
.clks = meson_g12a_clocks,
@ -520,11 +534,7 @@ static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw,
return 0;
if (priv->drvdata->otg_phy_host_port_disable)
dev_warn_once(priv->dev, "Manual OTG switch is broken on this "\
"SoC, when manual switching from "\
"Host to device, DWC3 controller "\
"will need to be resetted in order "\
"to recover usage of the Host port");
dev_warn_once(priv->dev, "Broken manual OTG switch\n");
return dwc3_meson_g12a_otg_mode_set(priv, mode);
}
@ -626,10 +636,7 @@ static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
/* GXL controls the PHY mode in the PHY registers unlike G12A */
priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base,
&phy_meson_g12a_usb_glue_regmap_conf);
if (IS_ERR(priv->usb_glue_regmap))
return PTR_ERR(priv->usb_glue_regmap);
return 0;
return PTR_ERR_OR_ZERO(priv->usb_glue_regmap);
}
static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
@ -906,8 +913,8 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
return ret;
}
if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
ret = regulator_enable(priv->vbus);
if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
@ -930,6 +937,10 @@ static const struct of_device_id dwc3_meson_g12a_match[] = {
.compatible = "amlogic,meson-gxm-usb-ctrl",
.data = &gxm_drvdata,
},
{
.compatible = "amlogic,meson-axg-usb-ctrl",
.data = &axg_drvdata,
},
{
.compatible = "amlogic,meson-g12a-usb-ctrl",
.data = &g12a_drvdata,

2
drivers/usb/dwc3/dwc3-of-simple.c
View File

@ -176,6 +176,8 @@ static const struct of_device_id of_dwc3_simple_match[] = {
{ .compatible = "cavium,octeon-7130-usb-uctl" },
{ .compatible = "sprd,sc9860-dwc3" },
{ .compatible = "allwinner,sun50i-h6-dwc3" },
{ .compatible = "hisilicon,hi3670-dwc3" },
{ .compatible = "intel,keembay-dwc3" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);

3
drivers/usb/dwc3/dwc3-pci.c
View File

@ -147,7 +147,8 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
pdev->device == PCI_DEVICE_ID_INTEL_BXT_M ||
pdev->device == PCI_DEVICE_ID_INTEL_EHLLP) {
guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
dwc->has_dsm_for_pm = true;
}

128
drivers/usb/dwc3/dwc3-qcom.c
View File

@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/extcon.h>
#include <linux/interconnect.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
@ -43,6 +44,14 @@
#define SDM845_QSCRATCH_SIZE 0x400
#define SDM845_DWC3_CORE_SIZE 0xcd00
/* Interconnect path bandwidths in MBps */
#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000)
#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
#define APPS_USB_AVG_BW 0
#define APPS_USB_PEAK_BW MBps_to_icc(40)
struct dwc3_acpi_pdata {
u32 qscratch_base_offset;
u32 qscratch_base_size;
@ -76,6 +85,8 @@ struct dwc3_qcom {
enum usb_dr_mode mode;
bool is_suspended;
bool pm_suspended;
struct icc_path *icc_path_ddr;
struct icc_path *icc_path_apps;
};
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
@ -190,6 +201,96 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
return 0;
}
static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
{
int ret;
ret = icc_enable(qcom->icc_path_ddr);
if (ret)
return ret;
ret = icc_enable(qcom->icc_path_apps);
if (ret)
icc_disable(qcom->icc_path_ddr);
return ret;
}
static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
{
int ret;
ret = icc_disable(qcom->icc_path_ddr);
if (ret)
return ret;
ret = icc_disable(qcom->icc_path_apps);
if (ret)
icc_enable(qcom->icc_path_ddr);
return ret;
}
/**
* dwc3_qcom_interconnect_init() - Get interconnect path handles
* and set bandwidhth.
* @qcom: Pointer to the concerned usb core.
*
*/
static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
{
struct device *dev = qcom->dev;
int ret;
qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
if (IS_ERR(qcom->icc_path_ddr)) {
dev_err(dev, "failed to get usb-ddr path: %ld\n",
PTR_ERR(qcom->icc_path_ddr));
return PTR_ERR(qcom->icc_path_ddr);
}
qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
if (IS_ERR(qcom->icc_path_apps)) {
dev_err(dev, "failed to get apps-usb path: %ld\n",
PTR_ERR(qcom->icc_path_apps));
return PTR_ERR(qcom->icc_path_apps);
}
if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
ret = icc_set_bw(qcom->icc_path_ddr,
USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
else
ret = icc_set_bw(qcom->icc_path_ddr,
USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
if (ret) {
dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
return ret;
}
ret = icc_set_bw(qcom->icc_path_apps,
APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
if (ret) {
dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
return ret;
}
return 0;
}
/**
* dwc3_qcom_interconnect_exit() - Release interconnect path handles
* @qcom: Pointer to the concerned usb core.
*
* This function is used to release interconnect path handle.
*/
static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
{
icc_put(qcom->icc_path_ddr);
icc_put(qcom->icc_path_apps);
}
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
{
if (qcom->hs_phy_irq) {
@ -239,7 +340,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
{
u32 val;
int i;
int i, ret;
if (qcom->is_suspended)
return 0;
@ -251,6 +352,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
ret = dwc3_qcom_interconnect_disable(qcom);
if (ret)
dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
qcom->is_suspended = true;
dwc3_qcom_enable_interrupts(qcom);
@ -276,6 +381,10 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
}
}
ret = dwc3_qcom_interconnect_enable(qcom);
if (ret)
dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
/* Clear existing events from PHY related to L2 in/out */
dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
@ -335,7 +444,9 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata;
int irq, ret;
int irq;
int ret;
irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq",
pdata ? pdata->hs_phy_irq_index : -1);
if (irq > 0) {
@ -454,7 +565,7 @@ static const struct property_entry dwc3_qcom_acpi_properties[] = {
static int dwc3_qcom_acpi_register_core(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
struct resource *res, *child_res = NULL;
int irq;
@ -514,7 +625,7 @@ out:
static int dwc3_qcom_of_register_core(struct platform_device *pdev)
{
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node, *dwc3_np;
struct device *dev = &pdev->dev;
int ret;
@ -638,6 +749,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
goto depopulate;
}
ret = dwc3_qcom_interconnect_init(qcom);
if (ret)
goto depopulate;
qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
/* enable vbus override for device mode */
@ -647,7 +762,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
/* register extcon to override sw_vbus on Vbus change later */
ret = dwc3_qcom_register_extcon(qcom);
if (ret)
goto depopulate;
goto interconnect_exit;
device_init_wakeup(&pdev->dev, 1);
qcom->is_suspended = false;
@ -657,6 +772,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
return 0;
interconnect_exit:
dwc3_qcom_interconnect_exit(qcom);
depopulate:
if (np)
of_platform_depopulate(&pdev->dev);
@ -687,6 +804,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
}
qcom->num_clocks = 0;
dwc3_qcom_interconnect_exit(qcom);
reset_control_assert(qcom->resets);
pm_runtime_allow(dev);

61
drivers/usb/dwc3/ep0.c
View File

@ -105,7 +105,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* IRQ we were waiting for is long gone.
*/
if (dep->flags & DWC3_EP_PENDING_REQUEST) {
unsigned direction;
unsigned int direction;
direction = !!(dep->flags & DWC3_EP0_DIR_IN);
@ -127,11 +127,11 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* handle it here.
*/
if (dwc->delayed_status) {
unsigned direction;
unsigned int direction;
direction = !dwc->ep0_expect_in;
dwc->delayed_status = false;
usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
usb_gadget_set_state(dwc->gadget, USB_STATE_CONFIGURED);
if (dwc->ep0state == EP0_STATUS_PHASE)
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
@ -172,7 +172,7 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
* XferNotReady(STATUS).
*/
if (dwc->three_stage_setup) {
unsigned direction;
unsigned int direction;
direction = dwc->ep0_expect_in;
dwc->ep0state = EP0_DATA_PHASE;
@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
spin_lock_irqsave(&dwc->lock, flags);
if (!dep->endpoint.desc) {
if (!dep->endpoint.desc || !dwc->pullups_connected) {
dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
dep->name);
ret = -ESHUTDOWN;
@ -325,7 +325,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
/*
* LTM will be set once we know how to set this in HW.
*/
usb_status |= dwc->gadget.is_selfpowered;
usb_status |= dwc->gadget->is_selfpowered;
if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
(dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
@ -450,7 +450,7 @@ static int dwc3_ep0_handle_device(struct dwc3 *dwc,
wValue = le16_to_cpu(ctrl->wValue);
wIndex = le16_to_cpu(ctrl->wIndex);
state = dwc->gadget.state;
state = dwc->gadget->state;
switch (wValue) {
case USB_DEVICE_REMOTE_WAKEUP:
@ -524,6 +524,11 @@ static int dwc3_ep0_handle_endpoint(struct dwc3 *dwc,
ret = __dwc3_gadget_ep_set_halt(dep, set, true);
if (ret)
return -EINVAL;
/* ClearFeature(Halt) may need delayed status */
if (!set && (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
return USB_GADGET_DELAYED_STATUS;
break;
default:
return -EINVAL;
@ -559,7 +564,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
enum usb_device_state state = dwc->gadget.state;
enum usb_device_state state = dwc->gadget->state;
u32 addr;
u32 reg;
@ -580,9 +585,9 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
if (addr)
usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
usb_gadget_set_state(dwc->gadget, USB_STATE_ADDRESS);
else
usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
usb_gadget_set_state(dwc->gadget, USB_STATE_DEFAULT);
return 0;
}
@ -592,14 +597,14 @@ static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
spin_unlock(&dwc->lock);
ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
ret = dwc->gadget_driver->setup(dwc->gadget, ctrl);
spin_lock(&dwc->lock);
return ret;
}
static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
enum usb_device_state state = dwc->gadget.state;
enum usb_device_state state = dwc->gadget->state;
u32 cfg;
int ret;
u32 reg;
@ -622,7 +627,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
* to change the state on the next usb_ep_queue()
*/
if (ret == 0)
usb_gadget_set_state(&dwc->gadget,
usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
/*
@ -641,7 +646,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
case USB_STATE_CONFIGURED:
ret = dwc3_ep0_delegate_req(dwc, ctrl);
if (!cfg && !ret)
usb_gadget_set_state(&dwc->gadget,
usb_gadget_set_state(dwc->gadget,
USB_STATE_ADDRESS);
break;
default:
@ -697,7 +702,7 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
struct dwc3_ep *dep;
enum usb_device_state state = dwc->gadget.state;
enum usb_device_state state = dwc->gadget->state;
u16 wLength;
if (state == USB_STATE_DEFAULT)
@ -741,7 +746,7 @@ static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ct
if (wIndex || wLength)
return -EINVAL;
dwc->gadget.isoch_delay = wValue;
dwc->gadget->isoch_delay = wValue;
return 0;
}
@ -942,12 +947,16 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
struct dwc3_ep *dep, struct dwc3_request *req)
{
unsigned int trb_length = 0;
int ret;
req->direction = !!dep->number;
if (req->request.length == 0) {
dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0,
if (!req->direction)
trb_length = dep->endpoint.maxpacket;
dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length,
DWC3_TRBCTL_CONTROL_DATA, false);
ret = dwc3_ep0_start_trans(dep);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
@ -994,9 +1003,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
if (!req->direction)
trb_length = dep->endpoint.maxpacket;
/* Now prepare one extra TRB to align transfer size */
dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr,
0, DWC3_TRBCTL_CONTROL_DATA,
trb_length, DWC3_TRBCTL_CONTROL_DATA,
false);
ret = dwc3_ep0_start_trans(dep);
} else {
@ -1042,6 +1054,17 @@ static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
__dwc3_ep0_do_control_status(dwc, dep);
}
void dwc3_ep0_send_delayed_status(struct dwc3 *dwc)
{
unsigned int direction = !dwc->ep0_expect_in;
if (dwc->ep0state != EP0_STATUS_PHASE)
return;
dwc->delayed_status = false;
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
}
static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
@ -1102,7 +1125,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
*/
if (!list_empty(&dep->pending_list)) {
dwc->delayed_status = false;
usb_gadget_set_state(&dwc->gadget,
usb_gadget_set_state(dwc->gadget,
USB_STATE_CONFIGURED);
dwc3_ep0_do_control_status(dwc, event);
}

591
drivers/usb/dwc3/gadget.c
View File

File diff suppressed because it is too large Load Diff

3
drivers/usb/dwc3/gadget.h
View File

@ -17,7 +17,7 @@
struct dwc3;
#define to_dwc3_ep(ep) (container_of(ep, struct dwc3_ep, endpoint))
#define gadget_to_dwc(g) (container_of(g, struct dwc3, gadget))
#define gadget_to_dwc(g) (dev_get_platdata(&g->dev))
/* DEPCFG parameter 1 */
#define DWC3_DEPCFG_INT_NUM(n) (((n) & 0x1f) << 0)
@ -113,6 +113,7 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
void dwc3_ep0_send_delayed_status(struct dwc3 *dwc);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW

17
drivers/usb/dwc3/trace.h
View File

@ -104,8 +104,8 @@ DECLARE_EVENT_CLASS(dwc3_log_request,
TP_STRUCT__entry(
__string(name, req->dep->name)
__field(struct dwc3_request *, req)
__field(unsigned, actual)
__field(unsigned, length)
__field(unsigned int, actual)
__field(unsigned int, length)
__field(int, status)
__field(int, zero)
__field(int, short_not_ok)
@ -246,6 +246,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
__entry->dequeue, __entry->bph, __entry->bpl,
({char *s;
int pcm = ((__entry->size >> 24) & 3) + 1;
switch (__entry->type) {
case USB_ENDPOINT_XFER_INT:
case USB_ENDPOINT_XFER_ISOC:
@ -291,12 +292,12 @@ DECLARE_EVENT_CLASS(dwc3_log_ep,
TP_ARGS(dep),
TP_STRUCT__entry(
__string(name, dep->name)
__field(unsigned, maxpacket)
__field(unsigned, maxpacket_limit)
__field(unsigned, max_streams)
__field(unsigned, maxburst)
__field(unsigned, flags)
__field(unsigned, direction)
__field(unsigned int, maxpacket)
__field(unsigned int, maxpacket_limit)
__field(unsigned int, max_streams)
__field(unsigned int, maxburst)
__field(unsigned int, flags)
__field(unsigned int, direction)
__field(u8, trb_enqueue)
__field(u8, trb_dequeue)
),

2
drivers/usb/dwc3/ulpi.c
View File

@ -19,7 +19,7 @@
static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
{
unsigned count = 1000;
unsigned int count = 1000;
u32 reg;
while (count--) {

8
drivers/usb/gadget/function/f_acm.c
View File

@ -425,9 +425,11 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
/* we know alt == 0, so this is an activation or a reset */
if (intf == acm->ctrl_id) {
dev_vdbg(&cdev->gadget->dev,
"reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
if (acm->notify->enabled) {
dev_vdbg(&cdev->gadget->dev,
"reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
}
if (!acm->notify->desc)
if (config_ep_by_speed(cdev->gadget, f, acm->notify))

40
drivers/usb/gadget/function/f_ncm.c
View File

@ -85,8 +85,10 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
return 13 * 1024 * 8 * 1000 * 8;
if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
return 4250000000U;
else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
return 3750000000U;
else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
return 13 * 512 * 8 * 1000 * 8;
else
@ -376,7 +378,7 @@ static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = {
.bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
/* the following 2 values can be tweaked if necessary */
/* .bMaxBurst = 0, */
.bMaxBurst = 15,
/* .bmAttributes = 0, */
};
@ -1189,7 +1191,6 @@ static int ncm_unwrap_ntb(struct gether *port,
const struct ndp_parser_opts *opts = ncm->parser_opts;
unsigned crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
int dgram_counter;
bool ndp_after_header;
/* dwSignature */
if (get_unaligned_le32(tmp) != opts->nth_sign) {
@ -1216,7 +1217,6 @@ static int ncm_unwrap_ntb(struct gether *port,
}
ndp_index = get_ncm(&tmp, opts->ndp_index);
ndp_after_header = false;
/* Run through all the NDP's in the NTB */
do {
@ -1232,8 +1232,6 @@ static int ncm_unwrap_ntb(struct gether *port,
ndp_index);
goto err;
}
if (ndp_index == opts->nth_size)
ndp_after_header = true;
/*
* walk through NDP
@ -1312,37 +1310,13 @@ static int ncm_unwrap_ntb(struct gether *port,
index2 = get_ncm(&tmp, opts->dgram_item_len);
dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
if (index2 == 0 || dg_len2 == 0)
break;
/* wDatagramIndex[1] */
if (ndp_after_header) {
if (index2 < opts->nth_size + opts->ndp_size) {
INFO(port->func.config->cdev,
"Bad index: %#X\n", index2);
goto err;
}
} else {
if (index2 < opts->nth_size + opts->dpe_size) {
INFO(port->func.config->cdev,
"Bad index: %#X\n", index2);
goto err;
}
}
if (index2 > block_len - opts->dpe_size) {
INFO(port->func.config->cdev,
"Bad index: %#X\n", index2);
goto err;
}
/* wDatagramLength[1] */
if ((dg_len2 < 14 + crc_len) ||
(dg_len2 > frame_max)) {
INFO(port->func.config->cdev,
"Bad dgram length: %#X\n", dg_len);
goto err;
}
/*
* Copy the data into a new skb.
* This ensures the truesize is correct
@ -1359,6 +1333,8 @@ static int ncm_unwrap_ntb(struct gether *port,
ndp_len -= 2 * (opts->dgram_item_len * 2);
dgram_counter++;
if (index2 == 0 || dg_len2 == 0)
break;
} while (ndp_len > 2 * (opts->dgram_item_len * 2));
} while (ndp_index);
@ -1560,7 +1536,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f)
fs_ncm_notify_desc.bEndpointAddress;
status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function,
ncm_ss_function, NULL);
ncm_ss_function, ncm_ss_function);
if (status)
goto fail;

16
drivers/usb/gadget/function/f_printer.c
View File

@ -31,6 +31,7 @@
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/cdev.h>
#include <linux/kref.h>
#include <asm/byteorder.h>
#include <linux/io.h>
@ -64,7 +65,7 @@ struct printer_dev {
struct usb_gadget *gadget;
s8 interface;
struct usb_ep *in_ep, *out_ep;
struct kref kref;
struct list_head rx_reqs; /* List of free RX structs */
struct list_head rx_reqs_active; /* List of Active RX xfers */
struct list_head rx_buffers; /* List of completed xfers */
@ -218,6 +219,13 @@ static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
/*-------------------------------------------------------------------------*/
static void printer_dev_free(struct kref *kref)
{
struct printer_dev *dev = container_of(kref, struct printer_dev, kref);
kfree(dev);
}
static struct usb_request *
printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
{
@ -353,6 +361,7 @@ printer_open(struct inode *inode, struct file *fd)
spin_unlock_irqrestore(&dev->lock, flags);
kref_get(&dev->kref);
DBG(dev, "printer_open returned %x\n", ret);
return ret;
}
@ -370,6 +379,7 @@ printer_close(struct inode *inode, struct file *fd)
dev->printer_status &= ~PRINTER_SELECTED;
spin_unlock_irqrestore(&dev->lock, flags);
kref_put(&dev->kref, printer_dev_free);
DBG(dev, "printer_close\n");
return 0;
@ -1386,7 +1396,8 @@ static void gprinter_free(struct usb_function *f)
struct f_printer_opts *opts;
opts = container_of(f->fi, struct f_printer_opts, func_inst);
kfree(dev);
kref_put(&dev->kref, printer_dev_free);
mutex_lock(&opts->lock);
--opts->refcnt;
mutex_unlock(&opts->lock);
@ -1455,6 +1466,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi)
return ERR_PTR(-ENOMEM);
}
kref_init(&dev->kref);
++opts->refcnt;
dev->minor = opts->minor;
dev->pnp_string = opts->pnp_string;

12
drivers/usb/gadget/function/f_tcm.c
View File

@ -392,12 +392,12 @@ static void bot_set_alt(struct f_uas *fu)
fu->flags = USBG_IS_BOT;
config_ep_by_speed(gadget, f, fu->ep_in);
config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_BBB);
ret = usb_ep_enable(fu->ep_in);
if (ret)
goto err_b_in;
config_ep_by_speed(gadget, f, fu->ep_out);
config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_BBB);
ret = usb_ep_enable(fu->ep_out);
if (ret)
goto err_b_out;
@ -852,21 +852,21 @@ static void uasp_set_alt(struct f_uas *fu)
if (gadget->speed >= USB_SPEED_SUPER)
fu->flags |= USBG_USE_STREAMS;
config_ep_by_speed(gadget, f, fu->ep_in);
config_ep_by_speed_and_alt(gadget, f, fu->ep_in, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_in);
if (ret)
goto err_b_in;
config_ep_by_speed(gadget, f, fu->ep_out);
config_ep_by_speed_and_alt(gadget, f, fu->ep_out, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_out);
if (ret)
goto err_b_out;
config_ep_by_speed(gadget, f, fu->ep_cmd);
config_ep_by_speed_and_alt(gadget, f, fu->ep_cmd, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_cmd);
if (ret)
goto err_cmd;
config_ep_by_speed(gadget, f, fu->ep_status);
config_ep_by_speed_and_alt(gadget, f, fu->ep_status, USB_G_ALT_INT_UAS);
ret = usb_ep_enable(fu->ep_status);
if (ret)
goto err_status;

8
drivers/usb/gadget/function/f_uvc.c
View File

@ -740,20 +740,20 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
/* Initialise video. */
ret = uvcg_video_init(&uvc->video, uvc);
if (ret < 0)
goto error;
goto v4l2_error;
/* Register a V4L2 device. */
ret = uvc_register_video(uvc);
if (ret < 0) {
uvcg_err(f, "failed to register video device\n");
goto error;
goto v4l2_error;
}
return 0;
error:
v4l2_error:
v4l2_device_unregister(&uvc->v4l2_dev);
error:
if (uvc->control_req)
usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
kfree(uvc->control_buf);

2
drivers/usb/gadget/function/u_ether.c
View File

@ -93,7 +93,7 @@ struct eth_dev {
static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
{
if (gadget_is_dualspeed(gadget) && (gadget->speed == USB_SPEED_HIGH ||
gadget->speed == USB_SPEED_SUPER))
gadget->speed >= USB_SPEED_SUPER))
return qmult * DEFAULT_QLEN;
else
return DEFAULT_QLEN;

1
drivers/usb/gadget/function/u_serial.c
View File

@ -1391,6 +1391,7 @@ void gserial_disconnect(struct gserial *gser)
if (port->port.tty)
tty_hangup(port->port.tty);
}
port->suspended = false;
spin_unlock_irqrestore(&port->port_lock, flags);
/* disable endpoints, aborting down any active I/O */

10
drivers/usb/gadget/udc/aspeed-vhub/core.c
View File

@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
/* Handle device interrupts */
if (istat & vhub->port_irq_mask) {
unsigned long bitmap = istat;
int offset = VHUB_IRQ_DEV1_BIT;
int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
for_each_set_bit_from(offset, &bitmap, size) {
i = offset - VHUB_IRQ_DEV1_BIT;
ast_vhub_dev_irq(&vhub->ports[i].dev);
for (i = 0; i < vhub->max_ports; i++) {
if (istat & VHUB_DEV_IRQ(i))
ast_vhub_dev_irq(&vhub->ports[i].dev);
}
}

3
drivers/usb/gadget/udc/aspeed-vhub/vhub.h
View File

@ -67,6 +67,9 @@
#define VHUB_IRQ_HUB_EP0_SETUP (1 << 0)
#define VHUB_IRQ_ACK_ALL 0x1ff
/* Downstream device IRQ mask. */
#define VHUB_DEV_IRQ(n) (VHUB_IRQ_DEVICE1 << (n))
/* SW reset reg */
#define VHUB_SW_RESET_EP_POOL (1 << 9)
#define VHUB_SW_RESET_DMA_CONTROLLER (1 << 8)

68
drivers/usb/gadget/udc/atmel_usba_udc.c
View File

@ -1056,16 +1056,19 @@ found_ep:
switch (usb_endpoint_type(desc)) {
case USB_ENDPOINT_XFER_CONTROL:
ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_ISOC:
ep->fifo_size = 1024;
ep->nr_banks = 2;
if (ep->udc->ep_prealloc)
ep->nr_banks = 2;
break;
case USB_ENDPOINT_XFER_BULK:
ep->fifo_size = 512;
ep->nr_banks = 1;
if (ep->udc->ep_prealloc)
ep->nr_banks = 1;
break;
case USB_ENDPOINT_XFER_INT:
@ -1075,7 +1078,8 @@ found_ep:
else
ep->fifo_size =
roundup_pow_of_two(le16_to_cpu(desc->wMaxPacketSize));
ep->nr_banks = 1;
if (ep->udc->ep_prealloc)
ep->nr_banks = 1;
break;
}
@ -1091,8 +1095,6 @@ found_ep:
USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3);
ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
ep->udc->configured_ep++;
}
return _ep;
@ -1786,7 +1788,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (status & USBA_END_OF_RESET) {
struct usba_ep *ep0, *ep;
int i, n;
int i;
usba_writel(udc, INT_CLR,
USBA_END_OF_RESET|USBA_END_OF_RESUME
@ -1834,13 +1836,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
"ODD: EP0 configuration is invalid!\n");
/* Preallocate other endpoints */
n = fifo_mode ? udc->num_ep : udc->configured_ep;
for (i = 1; i < n; i++) {
for (i = 1; i < udc->num_ep; i++) {
ep = &udc->usba_ep[i];
usba_ep_writel(ep, CFG, ep->ept_cfg);
if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
dev_err(&udc->pdev->dev,
"ODD: EP%d configuration is invalid!\n", i);
if (ep->ep.claimed) {
usba_ep_writel(ep, CFG, ep->ept_cfg);
if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED))
dev_err(&udc->pdev->dev,
"ODD: EP%d configuration is invalid!\n", i);
}
}
}
@ -2025,9 +2028,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget)
if (udc->vbus_pin)
disable_irq(gpiod_to_irq(udc->vbus_pin));
if (fifo_mode == 0)
udc->configured_ep = 1;
udc->suspended = false;
usba_stop(udc);
@ -2090,33 +2090,51 @@ static const struct usba_udc_config udc_at91sam9rl_cfg = {
.errata = &at91sam9rl_errata,
.config = ep_config_sam9,
.num_ep = ARRAY_SIZE(ep_config_sam9),
.ep_prealloc = true,
};
static const struct usba_udc_config udc_at91sam9g45_cfg = {
.errata = &at91sam9g45_errata,
.config = ep_config_sam9,
.num_ep = ARRAY_SIZE(ep_config_sam9),
.ep_prealloc = true,
};
static const struct usba_udc_config udc_sama5d3_cfg = {
.config = ep_config_sama5,
.num_ep = ARRAY_SIZE(ep_config_sama5),
.ep_prealloc = true,
};
static const struct usba_udc_config udc_sam9x60_cfg = {
.num_ep = ARRAY_SIZE(ep_config_sam9),
.config = ep_config_sam9,
.ep_prealloc = false,
};
static const struct of_device_id atmel_udc_dt_ids[] = {
{ .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg },
{ .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg },
{ .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg },
{ .compatible = "microchip,sam9x60-udc", .data = &udc_sam9x60_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids);
static const struct of_device_id atmel_pmc_dt_ids[] = {
{ .compatible = "atmel,at91sam9g45-pmc" },
{ .compatible = "atmel,at91sam9rl-pmc" },
{ .compatible = "atmel,at91sam9x5-pmc" },
{ /* sentinel */ }
};
static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
struct usba_udc *udc)
{
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
struct device_node *pp;
int i, ret;
struct usba_ep *eps, *ep;
const struct usba_udc_config *udc_config;
@ -2126,14 +2144,19 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
return ERR_PTR(-EINVAL);
udc_config = match->data;
udc->ep_prealloc = udc_config->ep_prealloc;
udc->errata = udc_config->errata;
udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
if (IS_ERR(udc->pmc))
udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc");
if (IS_ERR(udc->pmc))
udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
if (udc->errata && IS_ERR(udc->pmc))
return ERR_CAST(udc->pmc);
if (udc->errata) {
pp = of_find_matching_node_and_match(NULL, atmel_pmc_dt_ids,
NULL);
if (!pp)
return ERR_PTR(-ENODEV);
udc->pmc = syscon_node_to_regmap(pp);
of_node_put(pp);
if (IS_ERR(udc->pmc))
return ERR_CAST(udc->pmc);
}
udc->num_ep = 0;
@ -2142,7 +2165,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
if (fifo_mode == 0) {
udc->num_ep = udc_config->num_ep;
udc->configured_ep = 1;
} else {
udc->num_ep = usba_config_fifo_table(udc);
}

3
drivers/usb/gadget/udc/atmel_usba_udc.h
View File

@ -317,6 +317,7 @@ struct usba_udc_config {
const struct usba_udc_errata *errata;
const struct usba_ep_config *config;
const int num_ep;
const bool ep_prealloc;
};
struct usba_udc {
@ -336,7 +337,6 @@ struct usba_udc {
int irq;
struct gpio_desc *vbus_pin;
int num_ep;
int configured_ep;
struct usba_fifo_cfg *fifo_cfg;
struct clk *pclk;
struct clk *hclk;
@ -344,6 +344,7 @@ struct usba_udc {
bool bias_pulse_needed;
bool clocked;
bool suspended;
bool ep_prealloc;
u16 devstatus;

1
drivers/usb/gadget/udc/bcm63xx_udc.c
View File

@ -26,6 +26,7 @@
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/workqueue.h>

9
drivers/usb/gadget/udc/bdc/bdc_core.c
View File

@ -484,7 +484,7 @@ static void bdc_phy_exit(struct bdc *bdc)
static int bdc_probe(struct platform_device *pdev)
{
struct bdc *bdc;
int ret = -ENOMEM;
int ret;
int irq;
u32 temp;
struct device *dev = &pdev->dev;
@ -510,10 +510,9 @@ static int bdc_probe(struct platform_device *pdev)
bdc->clk = clk;
bdc->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(bdc->regs)) {
dev_err(dev, "ioremap error\n");
return -ENOMEM;
}
if (IS_ERR(bdc->regs))
return PTR_ERR(bdc->regs);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;

82
drivers/usb/gadget/udc/core.c
View File

@ -715,6 +715,9 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
goto out;
}
if (!gadget->connected)
goto out;
if (gadget->deactivated) {
/*
* If gadget is deactivated we only save new state.
@ -1164,21 +1167,18 @@ static int check_pending_gadget_drivers(struct usb_udc *udc)
}
/**
* usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
* usb_initialize_gadget - initialize a gadget and its embedded struct device
* @parent: the parent device to this udc. Usually the controller driver's
* device.
* @gadget: the gadget to be added to the list.
* @gadget: the gadget to be initialized.
* @release: a gadget release function.
*
* Returns zero on success, negative errno otherwise.
* Calls the gadget release function in the latter case.
*/
int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
void usb_initialize_gadget(struct device *parent, struct usb_gadget *gadget,
void (*release)(struct device *dev))
{
struct usb_udc *udc;
int ret = -ENOMEM;
dev_set_name(&gadget->dev, "gadget");
INIT_WORK(&gadget->work, usb_gadget_state_work);
gadget->dev.parent = parent;
@ -1189,17 +1189,32 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
gadget->dev.release = usb_udc_nop_release;
device_initialize(&gadget->dev);
}
EXPORT_SYMBOL_GPL(usb_initialize_gadget);
/**
* usb_add_gadget - adds a new gadget to the udc class driver list
* @gadget: the gadget to be added to the list.
*
* Returns zero on success, negative errno otherwise.
* Does not do a final usb_put_gadget() if an error occurs.
*/
int usb_add_gadget(struct usb_gadget *gadget)
{
struct usb_udc *udc;
int ret = -ENOMEM;
udc = kzalloc(sizeof(*udc), GFP_KERNEL);
if (!udc)
goto err_put_gadget;
goto error;
device_initialize(&udc->dev);
udc->dev.release = usb_udc_release;
udc->dev.class = udc_class;
udc->dev.groups = usb_udc_attr_groups;
udc->dev.parent = parent;
ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
udc->dev.parent = gadget->dev.parent;
ret = dev_set_name(&udc->dev, "%s",
kobject_name(&gadget->dev.parent->kobj));
if (ret)
goto err_put_udc;
@ -1242,8 +1257,30 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
err_put_udc:
put_device(&udc->dev);
err_put_gadget:
put_device(&gadget->dev);
error:
return ret;
}
EXPORT_SYMBOL_GPL(usb_add_gadget);
/**
* usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
* @parent: the parent device to this udc. Usually the controller driver's
* device.
* @gadget: the gadget to be added to the list.
* @release: a gadget release function.
*
* Returns zero on success, negative errno otherwise.
* Calls the gadget release function in the latter case.
*/
int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
void (*release)(struct device *dev))
{
int ret;
usb_initialize_gadget(parent, gadget, release);
ret = usb_add_gadget(gadget);
if (ret)
usb_put_gadget(gadget);
return ret;
}
EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
@ -1311,13 +1348,14 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
}
/**
* usb_del_gadget_udc - deletes @udc from udc_list
* usb_del_gadget - deletes @udc from udc_list
* @gadget: the gadget to be removed.
*
* This, will call usb_gadget_unregister_driver() if
* This will call usb_gadget_unregister_driver() if
* the @udc is still busy.
* It will not do a final usb_put_gadget().
*/
void usb_del_gadget_udc(struct usb_gadget *gadget)
void usb_del_gadget(struct usb_gadget *gadget)
{
struct usb_udc *udc = gadget->udc;
@ -1340,8 +1378,20 @@ void usb_del_gadget_udc(struct usb_gadget *gadget)
kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
flush_work(&gadget->work);
device_unregister(&udc->dev);
device_unregister(&gadget->dev);
memset(&gadget->dev, 0x00, sizeof(gadget->dev));
device_del(&gadget->dev);
}
EXPORT_SYMBOL_GPL(usb_del_gadget);
/**
* usb_del_gadget_udc - deletes @udc from udc_list
* @gadget: the gadget to be removed.
*
* Calls usb_del_gadget() and does a final usb_put_gadget().
*/
void usb_del_gadget_udc(struct usb_gadget *gadget)
{
usb_del_gadget(gadget);
usb_put_gadget(gadget);
}
EXPORT_SYMBOL_GPL(usb_del_gadget_udc);

9
drivers/usb/gadget/udc/fsl_udc_core.c
View File

@ -2061,7 +2061,7 @@ static int fsl_proc_read(struct seq_file *m, void *v)
"Sleep Enable: %d SOF Received Enable: %d "
"Reset Enable: %d\n"
"System Error Enable: %d "
"Port Change Dectected Enable: %d\n"
"Port Change Detected Enable: %d\n"
"USB Error Intr Enable: %d USB Intr Enable: %d\n\n",
(tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
(tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
@ -2439,11 +2439,12 @@ static int fsl_udc_probe(struct platform_device *pdev)
/* DEN is bidirectional ep number, max_ep doubles the number */
udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2;
udc_controller->irq = platform_get_irq(pdev, 0);
if (udc_controller->irq <= 0) {
ret = udc_controller->irq ? : -ENODEV;
ret = platform_get_irq(pdev, 0);
if (ret <= 0) {
ret = ret ? : -ENODEV;
goto err_iounmap;
}
udc_controller->irq = ret;
ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED,
driver_name, udc_controller);

17
drivers/usb/gadget/udc/lpc32xx_udc.c
View File

@ -495,7 +495,7 @@ static void proc_ep_show(struct seq_file *s, struct lpc32xx_ep *ep)
}
}
static int proc_udc_show(struct seq_file *s, void *unused)
static int udc_show(struct seq_file *s, void *unused)
{
struct lpc32xx_udc *udc = s->private;
struct lpc32xx_ep *ep;
@ -524,22 +524,11 @@ static int proc_udc_show(struct seq_file *s, void *unused)
return 0;
}
static int proc_udc_open(struct inode *inode, struct file *file)
{
return single_open(file, proc_udc_show, PDE_DATA(inode));
}
static const struct file_operations proc_ops = {
.owner = THIS_MODULE,
.open = proc_udc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
DEFINE_SHOW_ATTRIBUTE(udc);
static void create_debug_file(struct lpc32xx_udc *udc)
{
udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &proc_ops);
udc->pde = debugfs_create_file(debug_filename, 0, NULL, udc, &udc_fops);
}
static void remove_debug_file(struct lpc32xx_udc *udc)

24
drivers/usb/gadget/udc/net2272.c
View File

@ -9,7 +9,6 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@ -2196,7 +2195,8 @@ static int net2272_present(struct net2272 *dev)
static void
net2272_gadget_release(struct device *_dev)
{
struct net2272 *dev = dev_get_drvdata(_dev);
struct net2272 *dev = container_of(_dev, struct net2272, gadget.dev);
kfree(dev);
}
@ -2205,7 +2205,8 @@ net2272_gadget_release(struct device *_dev)
static void
net2272_remove(struct net2272 *dev)
{
usb_del_gadget_udc(&dev->gadget);
if (dev->added)
usb_del_gadget(&dev->gadget);
free_irq(dev->irq, dev);
iounmap(dev->base_addr);
device_remove_file(dev->dev, &dev_attr_registers);
@ -2235,6 +2236,7 @@ static struct net2272 *net2272_probe_init(struct device *dev, unsigned int irq)
/* the "gadget" abstracts/virtualizes the controller */
ret->gadget.name = driver_name;
usb_initialize_gadget(dev, &ret->gadget, net2272_gadget_release);
return ret;
}
@ -2273,10 +2275,10 @@ net2272_probe_fin(struct net2272 *dev, unsigned int irqflags)
if (ret)
goto err_irq;
ret = usb_add_gadget_udc_release(dev->dev, &dev->gadget,
net2272_gadget_release);
ret = usb_add_gadget(&dev->gadget);
if (ret)
goto err_add_udc;
dev->added = 1;
return 0;
@ -2451,7 +2453,7 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (pci_enable_device(pdev) < 0) {
ret = -ENODEV;
goto err_free;
goto err_put;
}
pci_set_master(pdev);
@ -2474,8 +2476,8 @@ net2272_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
err_pci:
pci_disable_device(pdev);
err_free:
kfree(dev);
err_put:
usb_put_gadget(&dev->gadget);
return ret;
}
@ -2536,7 +2538,7 @@ net2272_pci_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
kfree(dev);
usb_put_gadget(&dev->gadget);
}
/* Table of matching PCI IDs */
@ -2649,7 +2651,7 @@ net2272_plat_probe(struct platform_device *pdev)
err_req:
release_mem_region(base, len);
err:
kfree(dev);
usb_put_gadget(&dev->gadget);
return ret;
}
@ -2664,7 +2666,7 @@ net2272_plat_remove(struct platform_device *pdev)
release_mem_region(pdev->resource[0].start,
resource_size(&pdev->resource[0]));
kfree(dev);
usb_put_gadget(&dev->gadget);
return 0;
}

1
drivers/usb/gadget/udc/net2272.h
View File

@ -441,6 +441,7 @@ struct net2272 {
unsigned protocol_stall:1,
softconnect:1,
wakeup:1,
added:1,
dma_eot_polarity:1,
dma_dack_polarity:1,
dma_dreq_polarity:1,

11
drivers/usb/gadget/udc/net2280.c
View File

@ -3560,7 +3560,7 @@ static irqreturn_t net2280_irq(int irq, void *_dev)
static void gadget_release(struct device *_dev)
{
struct net2280 *dev = dev_get_drvdata(_dev);
struct net2280 *dev = container_of(_dev, struct net2280, gadget.dev);
kfree(dev);
}
@ -3571,7 +3571,8 @@ static void net2280_remove(struct pci_dev *pdev)
{
struct net2280 *dev = pci_get_drvdata(pdev);
usb_del_gadget_udc(&dev->gadget);
if (dev->added)
usb_del_gadget(&dev->gadget);
BUG_ON(dev->driver);
@ -3602,6 +3603,7 @@ static void net2280_remove(struct pci_dev *pdev)
device_remove_file(&pdev->dev, &dev_attr_registers);
ep_info(dev, "unbind\n");
usb_put_gadget(&dev->gadget);
}
/* wrap this driver around the specified device, but
@ -3623,6 +3625,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
pci_set_drvdata(pdev, dev);
usb_initialize_gadget(&pdev->dev, &dev->gadget, gadget_release);
spin_lock_init(&dev->lock);
dev->quirks = id->driver_data;
dev->pdev = pdev;
@ -3773,10 +3776,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (retval)
goto done;
retval = usb_add_gadget_udc_release(&pdev->dev, &dev->gadget,
gadget_release);
retval = usb_add_gadget(&dev->gadget);
if (retval)
goto done;
dev->added = 1;
return 0;
done:

1
drivers/usb/gadget/udc/net2280.h
View File

@ -156,6 +156,7 @@ struct net2280 {
softconnect : 1,
got_irq : 1,
region:1,
added:1,
u1_enable:1,
u2_enable:1,
ltm_enable:1,

55
drivers/usb/gadget/udc/pch_udc.c
View File

@ -12,12 +12,9 @@
#include <linux/interrupt.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/irq.h>
/* GPIO port for VBUS detecting */
static int vbus_gpio_port = -1; /* GPIO port number (-1:Not used) */
#define PCH_VBUS_PERIOD 3000 /* VBUS polling period (msec) */
#define PCH_VBUS_INTERVAL 10 /* VBUS polling interval (msec) */
@ -301,13 +298,13 @@ struct pch_udc_ep {
/**
* struct pch_vbus_gpio_data - Structure holding GPIO informaton
* for detecting VBUS
* @port: gpio port number
* @port: gpio descriptor for the VBUS GPIO
* @intr: gpio interrupt number
* @irq_work_fall: Structure for WorkQueue
* @irq_work_rise: Structure for WorkQueue
*/
struct pch_vbus_gpio_data {
int port;
struct gpio_desc *port;
int intr;
struct work_struct irq_work_fall;
struct work_struct irq_work_rise;
@ -1254,7 +1251,7 @@ static int pch_vbus_gpio_get_value(struct pch_udc_dev *dev)
int vbus = 0;
if (dev->vbus_gpio.port)
vbus = gpio_get_value(dev->vbus_gpio.port) ? 1 : 0;
vbus = gpiod_get_value(dev->vbus_gpio.port) ? 1 : 0;
else
vbus = -1;
@ -1356,42 +1353,30 @@ static irqreturn_t pch_vbus_gpio_irq(int irq, void *data)
/**
* pch_vbus_gpio_init() - This API initializes GPIO port detecting VBUS.
* @dev: Reference to the driver structure
* @vbus_gpio_port: Number of GPIO port to detect gpio
*
* Return codes:
* 0: Success
* -EINVAL: GPIO port is invalid or can't be initialized.
*/
static int pch_vbus_gpio_init(struct pch_udc_dev *dev, int vbus_gpio_port)
static int pch_vbus_gpio_init(struct pch_udc_dev *dev)
{
int err;
int irq_num = 0;
struct gpio_desc *gpiod;
dev->vbus_gpio.port = 0;
dev->vbus_gpio.port = NULL;
dev->vbus_gpio.intr = 0;
if (vbus_gpio_port <= -1)
return -EINVAL;
/* Retrieve the GPIO line from the USB gadget device */
gpiod = devm_gpiod_get(dev->gadget.dev.parent, NULL, GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
gpiod_set_consumer_name(gpiod, "pch_vbus");
err = gpio_is_valid(vbus_gpio_port);
if (!err) {
pr_err("%s: gpio port %d is invalid\n",
__func__, vbus_gpio_port);
return -EINVAL;
}
err = gpio_request(vbus_gpio_port, "pch_vbus");
if (err) {
pr_err("%s: can't request gpio port %d, err: %d\n",
__func__, vbus_gpio_port, err);
return -EINVAL;
}
dev->vbus_gpio.port = vbus_gpio_port;
gpio_direction_input(vbus_gpio_port);
dev->vbus_gpio.port = gpiod;
INIT_WORK(&dev->vbus_gpio.irq_work_fall, pch_vbus_gpio_work_fall);
irq_num = gpio_to_irq(vbus_gpio_port);
irq_num = gpiod_to_irq(gpiod);
if (irq_num > 0) {
irq_set_irq_type(irq_num, IRQ_TYPE_EDGE_BOTH);
err = request_irq(irq_num, pch_vbus_gpio_irq, 0,
@ -1417,9 +1402,6 @@ static void pch_vbus_gpio_free(struct pch_udc_dev *dev)
{
if (dev->vbus_gpio.intr)
free_irq(dev->vbus_gpio.intr, dev);
if (dev->vbus_gpio.port)
gpio_free(dev->vbus_gpio.port);
}
/**
@ -2894,7 +2876,7 @@ static int pch_udc_pcd_init(struct pch_udc_dev *dev)
{
pch_udc_init(dev);
pch_udc_pcd_reinit(dev);
pch_vbus_gpio_init(dev, vbus_gpio_port);
pch_vbus_gpio_init(dev);
return 0;
}
@ -3096,6 +3078,13 @@ static int pch_udc_probe(struct pci_dev *pdev,
dev->base_addr = pcim_iomap_table(pdev)[bar];
/*
* FIXME: add a GPIO descriptor table to pdev.dev using
* gpiod_add_descriptor_table() from <linux/gpio/machine.h> based on
* the PCI subsystem ID. The system-dependent GPIO is necessary for
* VBUS operation.
*/
/* initialize the hardware */
if (pch_udc_pcd_init(dev))
return -ENODEV;

3
drivers/usb/gadget/udc/s3c2410_udc.c
View File

@ -1270,7 +1270,6 @@ static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req,
static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
struct s3c2410_ep *ep = to_s3c2410_ep(_ep);
struct s3c2410_udc *udc;
int retval = -EINVAL;
unsigned long flags;
struct s3c2410_request *req = NULL;
@ -1283,8 +1282,6 @@ static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req)
if (!_ep || !_req)
return retval;
udc = to_s3c2410_udc(ep->gadget);
local_irq_save(flags);
list_for_each_entry(req, &ep->queue, queue) {

60
drivers/usb/gadget/udc/tegra-xudc.c
View File

@ -705,11 +705,11 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc)
err = phy_power_on(xudc->curr_utmi_phy);
if (err < 0)
dev_err(xudc->dev, "utmi power on failed %d\n", err);
dev_err(xudc->dev, "UTMI power on failed: %d\n", err);
err = phy_power_on(xudc->curr_usb3_phy);
if (err < 0)
dev_err(xudc->dev, "usb3 phy power on failed %d\n", err);
dev_err(xudc->dev, "USB3 PHY power on failed: %d\n", err);
dev_dbg(xudc->dev, "device mode on\n");
@ -759,11 +759,11 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc)
err = phy_power_off(xudc->curr_utmi_phy);
if (err < 0)
dev_err(xudc->dev, "utmi_phy power off failed %d\n", err);
dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err);
err = phy_power_off(xudc->curr_usb3_phy);
if (err < 0)
dev_err(xudc->dev, "usb3_phy power off failed %d\n", err);
dev_err(xudc->dev, "USB3 PHY power off failed: %d\n", err);
pm_runtime_put(xudc->dev);
}
@ -1539,7 +1539,7 @@ static int __tegra_xudc_ep_set_halt(struct tegra_xudc_ep *ep, bool halt)
return -EINVAL;
if (usb_endpoint_xfer_isoc(ep->desc)) {
dev_err(xudc->dev, "can't halt isoc EP\n");
dev_err(xudc->dev, "can't halt isochronous EP\n");
return -ENOTSUPP;
}
@ -1788,7 +1788,7 @@ static int __tegra_xudc_ep_enable(struct tegra_xudc_ep *ep,
if (usb_endpoint_xfer_isoc(desc)) {
if (xudc->nr_isoch_eps > XUDC_MAX_ISOCH_EPS) {
dev_err(xudc->dev, "too many isoch endpoints\n");
dev_err(xudc->dev, "too many isochronous endpoints\n");
return -EBUSY;
}
xudc->nr_isoch_eps++;
@ -3509,7 +3509,7 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
if (IS_ERR(xudc->utmi_phy[i])) {
err = PTR_ERR(xudc->utmi_phy[i]);
if (err != -EPROBE_DEFER)
dev_err(xudc->dev, "failed to get usb2-%d phy: %d\n",
dev_err(xudc->dev, "failed to get usb2-%d PHY: %d\n",
i, err);
goto clean_up;
@ -3539,12 +3539,12 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
if (IS_ERR(xudc->usb3_phy[i])) {
err = PTR_ERR(xudc->usb3_phy[i]);
if (err != -EPROBE_DEFER)
dev_err(xudc->dev, "failed to get usb3-%d phy: %d\n",
dev_err(xudc->dev, "failed to get usb3-%d PHY: %d\n",
usb3, err);
goto clean_up;
} else if (xudc->usb3_phy[i])
dev_dbg(xudc->dev, "usb3_phy-%d registered", usb3);
dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3);
}
return err;
@ -3577,13 +3577,13 @@ static int tegra_xudc_phy_init(struct tegra_xudc *xudc)
for (i = 0; i < xudc->soc->num_phys; i++) {
err = phy_init(xudc->utmi_phy[i]);
if (err < 0) {
dev_err(xudc->dev, "utmi phy init failed: %d\n", err);
dev_err(xudc->dev, "UTMI PHY #%u initialization failed: %d\n", i, err);
goto exit_phy;
}
err = phy_init(xudc->usb3_phy[i]);
if (err < 0) {
dev_err(xudc->dev, "usb3 phy init failed: %d\n", err);
dev_err(xudc->dev, "USB3 PHY #%u initialization failed: %d\n", i, err);
goto exit_phy;
}
}
@ -3692,34 +3692,33 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
struct device *dev = xudc->dev;
int err;
xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev,
"dev");
xudc->genpd_dev_device = dev_pm_domain_attach_by_name(dev, "dev");
if (IS_ERR(xudc->genpd_dev_device)) {
err = PTR_ERR(xudc->genpd_dev_device);
dev_err(dev, "failed to get dev pm-domain: %d\n", err);
dev_err(dev, "failed to get device power domain: %d\n", err);
return err;
}
xudc->genpd_dev_ss = dev_pm_domain_attach_by_name(dev, "ss");
if (IS_ERR(xudc->genpd_dev_ss)) {
err = PTR_ERR(xudc->genpd_dev_ss);
dev_err(dev, "failed to get superspeed pm-domain: %d\n", err);
dev_err(dev, "failed to get SuperSpeed power domain: %d\n", err);
return err;
}
xudc->genpd_dl_device = device_link_add(dev, xudc->genpd_dev_device,
DL_FLAG_PM_RUNTIME |
DL_FLAG_STATELESS);
DL_FLAG_PM_RUNTIME |
DL_FLAG_STATELESS);
if (!xudc->genpd_dl_device) {
dev_err(dev, "adding usb device device link failed!\n");
dev_err(dev, "failed to add USB device link\n");
return -ENODEV;
}
xudc->genpd_dl_ss = device_link_add(dev, xudc->genpd_dev_ss,
DL_FLAG_PM_RUNTIME |
DL_FLAG_STATELESS);
DL_FLAG_PM_RUNTIME |
DL_FLAG_STATELESS);
if (!xudc->genpd_dl_ss) {
dev_err(dev, "adding superspeed device link failed!\n");
dev_err(dev, "failed to add SuperSpeed device link\n");
return -ENODEV;
}
@ -3733,7 +3732,7 @@ static int tegra_xudc_probe(struct platform_device *pdev)
unsigned int i;
int err;
xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_ATOMIC);
xudc = devm_kzalloc(&pdev->dev, sizeof(*xudc), GFP_KERNEL);
if (!xudc)
return -ENOMEM;
@ -3772,18 +3771,19 @@ static int tegra_xudc_probe(struct platform_device *pdev)
return err;
}
xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks,
sizeof(*xudc->clks), GFP_KERNEL);
xudc->clks = devm_kcalloc(&pdev->dev, xudc->soc->num_clks, sizeof(*xudc->clks),
GFP_KERNEL);
if (!xudc->clks)
return -ENOMEM;
for (i = 0; i < xudc->soc->num_clks; i++)
xudc->clks[i].id = xudc->soc->clock_names[i];
err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks,
xudc->clks);
err = devm_clk_bulk_get(&pdev->dev, xudc->soc->num_clks, xudc->clks);
if (err) {
dev_err(xudc->dev, "failed to request clks %d\n", err);
if (err != -EPROBE_DEFER)
dev_err(xudc->dev, "failed to request clocks: %d\n", err);
return err;
}
@ -3798,7 +3798,9 @@ static int tegra_xudc_probe(struct platform_device *pdev)
err = devm_regulator_bulk_get(&pdev->dev, xudc->soc->num_supplies,
xudc->supplies);
if (err) {
dev_err(xudc->dev, "failed to request regulators %d\n", err);
if (err != -EPROBE_DEFER)
dev_err(xudc->dev, "failed to request regulators: %d\n", err);
return err;
}
@ -3808,7 +3810,7 @@ static int tegra_xudc_probe(struct platform_device *pdev)
err = regulator_bulk_enable(xudc->soc->num_supplies, xudc->supplies);
if (err) {
dev_err(xudc->dev, "failed to enable regulators %d\n", err);
dev_err(xudc->dev, "failed to enable regulators: %d\n", err);
goto put_padctl;
}

27
include/linux/usb/gadget.h
View File

@ -436,6 +436,7 @@ struct usb_gadget {
};
#define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
/* Interface to the device model */
static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
{ dev_set_drvdata(&gadget->dev, data); }
static inline void *get_gadget_data(struct usb_gadget *gadget)
@ -444,6 +445,26 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
{
return container_of(dev, struct usb_gadget, dev);
}
static inline struct usb_gadget *usb_get_gadget(struct usb_gadget *gadget)
{
get_device(&gadget->dev);
return gadget;
}
static inline void usb_put_gadget(struct usb_gadget *gadget)
{
put_device(&gadget->dev);
}
extern void usb_initialize_gadget(struct device *parent,
struct usb_gadget *gadget, void (*release)(struct device *dev));
extern int usb_add_gadget(struct usb_gadget *gadget);
extern void usb_del_gadget(struct usb_gadget *gadget);
/* Legacy device-model interface */
extern int usb_add_gadget_udc_release(struct device *parent,
struct usb_gadget *gadget, void (*release)(struct device *dev));
extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
extern void usb_del_gadget_udc(struct usb_gadget *gadget);
extern char *usb_get_gadget_udc_name(void);
/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
#define gadget_for_each_ep(tmp, gadget) \
@ -735,12 +756,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
*/
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
extern int usb_add_gadget_udc_release(struct device *parent,
struct usb_gadget *gadget, void (*release)(struct device *dev));
extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
extern void usb_del_gadget_udc(struct usb_gadget *gadget);
extern char *usb_get_gadget_udc_name(void);
/*-------------------------------------------------------------------------*/
/* utility to simplify dealing with string descriptors */