ARM: 6629/2: aaec2000: remove support for mach-aaec2000
mach-aaec2000 is no longer actively maintained and is only receiving fixups to remain building with other kernel updates. Cc: Bellido Nicolas <ml@acolin.be> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Jamie Iles
Russell King
parent
82e6923e18
commit
21bd6d37cf
|
|
@ -212,15 +212,6 @@ choice
|
|||
prompt "ARM system type"
|
||||
default ARCH_VERSATILE
|
||||
|
||||
config ARCH_AAEC2000
|
||||
bool "Agilent AAEC-2000 based"
|
||||
select CPU_ARM920T
|
||||
select ARM_AMBA
|
||||
select HAVE_CLK
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
help
|
||||
This enables support for systems based on the Agilent AAEC-2000
|
||||
|
||||
config ARCH_INTEGRATOR
|
||||
bool "ARM Ltd. Integrator family"
|
||||
select ARM_AMBA
|
||||
|
|
@ -871,8 +862,6 @@ endchoice
|
|||
# Kconfigs may be included either alphabetically (according to the
|
||||
# plat- suffix) or along side the corresponding mach-* source.
|
||||
#
|
||||
source "arch/arm/mach-aaec2000/Kconfig"
|
||||
|
||||
source "arch/arm/mach-at91/Kconfig"
|
||||
|
||||
source "arch/arm/mach-bcmring/Kconfig"
|
||||
|
|
|
|||
|
|
@ -126,7 +126,6 @@ endif
|
|||
|
||||
# Machine directory name. This list is sorted alphanumerically
|
||||
# by CONFIG_* macro name.
|
||||
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
|
||||
machine-$(CONFIG_ARCH_AT91) := at91
|
||||
machine-$(CONFIG_ARCH_BCMRING) := bcmring
|
||||
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
|
||||
|
|
|
|||
|
|
@ -1,11 +0,0 @@
|
|||
if ARCH_AAEC2000
|
||||
|
||||
menu "Agilent AAEC-2000 Implementations"
|
||||
|
||||
config MACH_AAED2000
|
||||
bool "Agilent AAED-2000 Development Platform"
|
||||
select CPU_ARM920T
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
#
|
||||
# Makefile for the linux kernel.
|
||||
#
|
||||
|
||||
# Common support (must be linked before board specific support)
|
||||
obj-y += core.o
|
||||
|
||||
# Specific board support
|
||||
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
|
||||
|
|
@ -1 +0,0 @@
|
|||
zreladdr-y := 0xf0008000
|
||||
|
|
@ -1,102 +0,0 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/aaed2000.c
|
||||
*
|
||||
* Support for the Agilent AAED-2000 Development Platform.
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/major.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <mach/aaed2000.h>
|
||||
|
||||
#include "core.h"
|
||||
|
||||
static void aaed2000_clcd_disable(struct clcd_fb *fb)
|
||||
{
|
||||
AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
|
||||
}
|
||||
|
||||
static void aaed2000_clcd_enable(struct clcd_fb *fb)
|
||||
{
|
||||
AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
|
||||
}
|
||||
|
||||
struct aaec2000_clcd_info clcd_info = {
|
||||
.enable = aaed2000_clcd_enable,
|
||||
.disable = aaed2000_clcd_disable,
|
||||
.panel = {
|
||||
.mode = {
|
||||
.name = "Sharp",
|
||||
.refresh = 60,
|
||||
.xres = 640,
|
||||
.yres = 480,
|
||||
.pixclock = 39721,
|
||||
.left_margin = 20,
|
||||
.right_margin = 44,
|
||||
.upper_margin = 21,
|
||||
.lower_margin = 34,
|
||||
.hsync_len = 96,
|
||||
.vsync_len = 2,
|
||||
.sync = 0,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
.width = -1,
|
||||
.height = -1,
|
||||
.tim2 = TIM2_IVS | TIM2_IHS,
|
||||
.cntl = CNTL_LCDTFT,
|
||||
.bpp = 16,
|
||||
},
|
||||
};
|
||||
|
||||
static void __init aaed2000_init_irq(void)
|
||||
{
|
||||
aaec2000_init_irq();
|
||||
}
|
||||
|
||||
static void __init aaed2000_init(void)
|
||||
{
|
||||
aaec2000_set_clcd_plat_data(&clcd_info);
|
||||
}
|
||||
|
||||
static struct map_desc aaed2000_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = EXT_GPIO_VBASE,
|
||||
.pfn = __phys_to_pfn(EXT_GPIO_PBASE),
|
||||
.length = EXT_GPIO_LENGTH,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
};
|
||||
|
||||
static void __init aaed2000_map_io(void)
|
||||
{
|
||||
aaec2000_map_io();
|
||||
iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
|
||||
}
|
||||
|
||||
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
|
||||
/* Maintainer: Nicolas Bellido Y Ortega */
|
||||
.map_io = aaed2000_map_io,
|
||||
.init_irq = aaed2000_init_irq,
|
||||
.timer = &aaec2000_timer,
|
||||
.init_machine = aaed2000_init,
|
||||
MACHINE_END
|
||||
|
|
@ -1,298 +0,0 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/core.c
|
||||
*
|
||||
* Code common to all AAEC-2000 machines
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/signal.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/gfp.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/sizes.h>
|
||||
|
||||
#include <asm/mach/flash.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
#include "core.h"
|
||||
|
||||
/*
|
||||
* Common I/O mapping:
|
||||
*
|
||||
* Static virtual address mappings are as follow:
|
||||
*
|
||||
* 0xf8000000-0xf8001ffff: Devices connected to APB bus
|
||||
* 0xf8002000-0xf8003ffff: Devices connected to AHB bus
|
||||
*
|
||||
* Below 0xe8000000 is reserved for vm allocation.
|
||||
*
|
||||
* The machine specific code must provide the extra mapping beside the
|
||||
* default mapping provided here.
|
||||
*/
|
||||
static struct map_desc standard_io_desc[] __initdata = {
|
||||
{
|
||||
.virtual = VIO_APB_BASE,
|
||||
.pfn = __phys_to_pfn(PIO_APB_BASE),
|
||||
.length = IO_APB_LENGTH,
|
||||
.type = MT_DEVICE
|
||||
}, {
|
||||
.virtual = VIO_AHB_BASE,
|
||||
.pfn = __phys_to_pfn(PIO_AHB_BASE),
|
||||
.length = IO_AHB_LENGTH,
|
||||
.type = MT_DEVICE
|
||||
}
|
||||
};
|
||||
|
||||
void __init aaec2000_map_io(void)
|
||||
{
|
||||
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt handling routines
|
||||
*/
|
||||
static void aaec2000_int_ack(struct irq_data *d)
|
||||
{
|
||||
IRQ_INTSR = 1 << d->irq;
|
||||
}
|
||||
|
||||
static void aaec2000_int_mask(struct irq_data *d)
|
||||
{
|
||||
IRQ_INTENC |= (1 << d->irq);
|
||||
}
|
||||
|
||||
static void aaec2000_int_unmask(struct irq_data *d)
|
||||
{
|
||||
IRQ_INTENS |= (1 << d->irq);
|
||||
}
|
||||
|
||||
static struct irq_chip aaec2000_irq_chip = {
|
||||
.irq_ack = aaec2000_int_ack,
|
||||
.irq_mask = aaec2000_int_mask,
|
||||
.irq_unmask = aaec2000_int_unmask,
|
||||
};
|
||||
|
||||
void __init aaec2000_init_irq(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < NR_IRQS; i++) {
|
||||
set_irq_handler(i, handle_level_irq);
|
||||
set_irq_chip(i, &aaec2000_irq_chip);
|
||||
set_irq_flags(i, IRQF_VALID);
|
||||
}
|
||||
|
||||
/* Disable all interrupts */
|
||||
IRQ_INTENC = 0xffffffff;
|
||||
|
||||
/* Clear any pending interrupts */
|
||||
IRQ_INTSR = IRQ_INTSR;
|
||||
}
|
||||
|
||||
/*
|
||||
* Time keeping
|
||||
*/
|
||||
/* IRQs are disabled before entering here from do_gettimeofday() */
|
||||
static unsigned long aaec2000_gettimeoffset(void)
|
||||
{
|
||||
unsigned long ticks_to_match, elapsed, usec;
|
||||
|
||||
/* Get ticks before next timer match */
|
||||
ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
|
||||
|
||||
/* We need elapsed ticks since last match */
|
||||
elapsed = LATCH - ticks_to_match;
|
||||
|
||||
/* Now, convert them to usec */
|
||||
usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
|
||||
|
||||
return usec;
|
||||
}
|
||||
|
||||
/* We enter here with IRQs enabled */
|
||||
static irqreturn_t
|
||||
aaec2000_timer_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
/* TODO: Check timer accuracy */
|
||||
timer_tick();
|
||||
TIMER1_CLEAR = 1;
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction aaec2000_timer_irq = {
|
||||
.name = "AAEC-2000 Timer Tick",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = aaec2000_timer_interrupt,
|
||||
};
|
||||
|
||||
static void __init aaec2000_timer_init(void)
|
||||
{
|
||||
/* Disable timer 1 */
|
||||
TIMER1_CTRL = 0;
|
||||
|
||||
/* We have somehow to generate a 100Hz clock.
|
||||
* We then use the 508KHz timer in periodic mode.
|
||||
*/
|
||||
TIMER1_LOAD = LATCH;
|
||||
TIMER1_CLEAR = 1; /* Clear interrupt */
|
||||
|
||||
setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
|
||||
|
||||
TIMER1_CTRL = TIMER_CTRL_ENABLE |
|
||||
TIMER_CTRL_PERIODIC |
|
||||
TIMER_CTRL_CLKSEL_508K;
|
||||
}
|
||||
|
||||
struct sys_timer aaec2000_timer = {
|
||||
.init = aaec2000_timer_init,
|
||||
.offset = aaec2000_gettimeoffset,
|
||||
};
|
||||
|
||||
static struct clcd_panel mach_clcd_panel;
|
||||
|
||||
static int aaec2000_clcd_setup(struct clcd_fb *fb)
|
||||
{
|
||||
dma_addr_t dma;
|
||||
|
||||
fb->panel = &mach_clcd_panel;
|
||||
|
||||
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
|
||||
&dma, GFP_KERNEL);
|
||||
|
||||
if (!fb->fb.screen_base) {
|
||||
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
fb->fb.fix.smem_start = dma;
|
||||
fb->fb.fix.smem_len = SZ_1M;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
|
||||
{
|
||||
return dma_mmap_writecombine(&fb->dev->dev, vma,
|
||||
fb->fb.screen_base,
|
||||
fb->fb.fix.smem_start,
|
||||
fb->fb.fix.smem_len);
|
||||
}
|
||||
|
||||
static void aaec2000_clcd_remove(struct clcd_fb *fb)
|
||||
{
|
||||
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
|
||||
fb->fb.screen_base, fb->fb.fix.smem_start);
|
||||
}
|
||||
|
||||
static struct clcd_board clcd_plat_data = {
|
||||
.name = "AAEC-2000",
|
||||
.check = clcdfb_check,
|
||||
.decode = clcdfb_decode,
|
||||
.setup = aaec2000_clcd_setup,
|
||||
.mmap = aaec2000_clcd_mmap,
|
||||
.remove = aaec2000_clcd_remove,
|
||||
};
|
||||
|
||||
static struct amba_device clcd_device = {
|
||||
.dev = {
|
||||
.init_name = "mb:16",
|
||||
.coherent_dma_mask = ~0,
|
||||
.platform_data = &clcd_plat_data,
|
||||
},
|
||||
.res = {
|
||||
.start = AAEC_CLCD_PHYS,
|
||||
.end = AAEC_CLCD_PHYS + SZ_4K - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
.irq = { INT_LCD, NO_IRQ },
|
||||
.periphid = 0x41110,
|
||||
};
|
||||
|
||||
static struct amba_device *amba_devs[] __initdata = {
|
||||
&clcd_device,
|
||||
};
|
||||
|
||||
void clk_disable(struct clk *clk)
|
||||
{
|
||||
}
|
||||
|
||||
int clk_set_rate(struct clk *clk, unsigned long rate)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
int clk_enable(struct clk *clk)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct clk *clk_get(struct device *dev, const char *id)
|
||||
{
|
||||
return dev && strcmp(dev_name(dev), "mb:16") == 0 ? NULL : ERR_PTR(-ENOENT);
|
||||
}
|
||||
|
||||
void clk_put(struct clk *clk)
|
||||
{
|
||||
}
|
||||
|
||||
void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
|
||||
{
|
||||
clcd_plat_data.enable = clcd->enable;
|
||||
clcd_plat_data.disable = clcd->disable;
|
||||
memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
|
||||
}
|
||||
|
||||
static struct flash_platform_data aaec2000_flash_data = {
|
||||
.map_name = "cfi_probe",
|
||||
.width = 4,
|
||||
};
|
||||
|
||||
static struct resource aaec2000_flash_resource = {
|
||||
.start = AAEC_FLASH_BASE,
|
||||
.end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device aaec2000_flash_device = {
|
||||
.name = "armflash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &aaec2000_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &aaec2000_flash_resource,
|
||||
};
|
||||
|
||||
static int __init aaec2000_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
||||
struct amba_device *d = amba_devs[i];
|
||||
amba_device_register(d, &iomem_resource);
|
||||
}
|
||||
|
||||
platform_device_register(&aaec2000_flash_device);
|
||||
|
||||
return 0;
|
||||
};
|
||||
arch_initcall(aaec2000_init);
|
||||
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/core.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/amba/bus.h>
|
||||
#include <linux/amba/clcd.h>
|
||||
|
||||
struct sys_timer;
|
||||
|
||||
extern struct sys_timer aaec2000_timer;
|
||||
extern void __init aaec2000_map_io(void);
|
||||
extern void __init aaec2000_init_irq(void);
|
||||
|
||||
struct aaec2000_clcd_info {
|
||||
struct clcd_panel panel;
|
||||
void (*disable)(struct clcd_fb *);
|
||||
void (*enable)(struct clcd_fb *);
|
||||
};
|
||||
|
||||
extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
|
||||
|
||||
|
|
@ -1,207 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/aaec2000.h
|
||||
*
|
||||
* AAEC-2000 registers definition
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_AAEC2000_H
|
||||
#define __ASM_ARCH_AAEC2000_H
|
||||
|
||||
#ifndef __ASM_ARCH_HARDWARE_H
|
||||
#error You must include hardware.h not this file
|
||||
#endif /* __ASM_ARCH_HARDWARE_H */
|
||||
|
||||
/* Chip selects */
|
||||
#define AAEC_CS0 0x00000000
|
||||
#define AAEC_CS1 0x10000000
|
||||
#define AAEC_CS2 0x20000000
|
||||
#define AAEC_CS3 0x30000000
|
||||
|
||||
/* Flash */
|
||||
#define AAEC_FLASH_BASE AAEC_CS0
|
||||
#define AAEC_FLASH_SIZE SZ_64M
|
||||
|
||||
/* Interrupt controller */
|
||||
#define IRQ_BASE __REG(0x80000500)
|
||||
#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
|
||||
#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
|
||||
#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
|
||||
#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
|
||||
|
||||
/* UART 1 */
|
||||
#define UART1_BASE __REG(0x80000600)
|
||||
#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
|
||||
#define UART1_LCR __REG(0x80000604) /* Link Control Register */
|
||||
#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
|
||||
#define UART1_CR __REG(0x8000060c) /* Control Register */
|
||||
#define UART1_SR __REG(0x80000610) /* Status Register */
|
||||
#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
|
||||
#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
|
||||
#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
|
||||
|
||||
/* UART 2 */
|
||||
#define UART2_BASE __REG(0x80000700)
|
||||
#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
|
||||
#define UART2_LCR __REG(0x80000704) /* Link Control Register */
|
||||
#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
|
||||
#define UART2_CR __REG(0x8000070c) /* Control Register */
|
||||
#define UART2_SR __REG(0x80000710) /* Status Register */
|
||||
#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
|
||||
#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
|
||||
#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
|
||||
|
||||
/* UART 3 */
|
||||
#define UART3_BASE __REG(0x80000800)
|
||||
#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
|
||||
#define UART3_LCR __REG(0x80000804) /* Link Control Register */
|
||||
#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
|
||||
#define UART3_CR __REG(0x8000080c) /* Control Register */
|
||||
#define UART3_SR __REG(0x80000810) /* Status Register */
|
||||
#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
|
||||
#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
|
||||
#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
|
||||
|
||||
/* These are used in some places */
|
||||
#define _UART1_BASE __PREG(UART1_BASE)
|
||||
#define _UART2_BASE __PREG(UART2_BASE)
|
||||
#define _UART3_BASE __PREG(UART3_BASE)
|
||||
|
||||
/* UART Registers Offsets */
|
||||
#define UART_DR 0x00
|
||||
#define UART_LCR 0x04
|
||||
#define UART_BRCR 0x08
|
||||
#define UART_CR 0x0c
|
||||
#define UART_SR 0x10
|
||||
#define UART_INT 0x14
|
||||
#define UART_INTM 0x18
|
||||
#define UART_INTRES 0x1c
|
||||
|
||||
/* UART_LCR Bitmask */
|
||||
#define UART_LCR_BRK (1 << 0) /* Send Break */
|
||||
#define UART_LCR_PEN (1 << 1) /* Parity Enable */
|
||||
#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
|
||||
#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
|
||||
#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
|
||||
#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
|
||||
#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
|
||||
#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
|
||||
#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
|
||||
|
||||
/* UART_CR Bitmask */
|
||||
#define UART_CR_EN (1 << 0) /* UART Enable */
|
||||
#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
|
||||
#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
|
||||
#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
|
||||
#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
|
||||
#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
|
||||
#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
|
||||
|
||||
/* UART_SR Bitmask */
|
||||
#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
|
||||
#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
|
||||
#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
|
||||
#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
|
||||
#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
|
||||
#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
|
||||
#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
|
||||
#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
|
||||
|
||||
/* UART_INT Bitmask */
|
||||
#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
|
||||
#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
|
||||
#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
|
||||
#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
|
||||
|
||||
/* Timer 1 */
|
||||
#define TIMER1_BASE __REG(0x80000c00)
|
||||
#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
|
||||
#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
|
||||
#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
|
||||
#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
|
||||
|
||||
/* Timer 2 */
|
||||
#define TIMER2_BASE __REG(0x80000d00)
|
||||
#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
|
||||
#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
|
||||
#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
|
||||
#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
|
||||
|
||||
/* Timer 3 */
|
||||
#define TIMER3_BASE __REG(0x80000e00)
|
||||
#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
|
||||
#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
|
||||
#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
|
||||
#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
|
||||
|
||||
/* Timer Control register bits */
|
||||
#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start Timer) */
|
||||
#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
|
||||
#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
|
||||
#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
|
||||
#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
|
||||
|
||||
/* Power and State Control */
|
||||
#define POWER_BASE __REG(0x80000400)
|
||||
#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
|
||||
#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
|
||||
#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
|
||||
#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
|
||||
#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
|
||||
#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
|
||||
#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
|
||||
#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
|
||||
#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
|
||||
|
||||
/* GPIO Registers */
|
||||
#define AAEC_GPIO_PHYS 0x80000e00
|
||||
|
||||
#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
|
||||
#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
|
||||
#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
|
||||
#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
|
||||
#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
|
||||
#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
|
||||
#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
|
||||
#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
|
||||
#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
|
||||
#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
|
||||
#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
|
||||
#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
|
||||
#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
|
||||
#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
|
||||
#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
|
||||
#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
|
||||
#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
|
||||
#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
|
||||
#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
|
||||
#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
|
||||
#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
|
||||
#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
|
||||
#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
|
||||
#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
|
||||
#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
|
||||
#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
|
||||
#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
|
||||
#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
|
||||
#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
|
||||
#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
|
||||
#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
|
||||
#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
|
||||
#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
|
||||
#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)
|
||||
|
||||
#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
|
||||
#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
|
||||
#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
|
||||
#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)
|
||||
|
||||
/* LCD Controller */
|
||||
#define AAEC_CLCD_PHYS 0x80003000
|
||||
|
||||
#endif /* __ARM_ARCH_AAEC2000_H */
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/aaed2000.h
|
||||
*
|
||||
* AAED-2000 specific bits definition
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_AAED2000_H
|
||||
#define __ASM_ARCH_AAED2000_H
|
||||
|
||||
/* External GPIOs. */
|
||||
|
||||
#define EXT_GPIO_PBASE AAEC_CS3
|
||||
#define EXT_GPIO_VBASE 0xf8100000
|
||||
#define EXT_GPIO_LENGTH 0x00001000
|
||||
|
||||
#define __ext_gpio_p2v(x) ((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
|
||||
#define __ext_gpio_v2p(x) ((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
|
||||
|
||||
#define __EXT_GPIO_REG(x) (*((volatile u32 *)__ext_gpio_p2v(x)))
|
||||
#define __EXT_GPIO_PREG(x) (__ext_gpio_v2p((u32)&(x)))
|
||||
|
||||
#define AAED_EXT_GPIO __EXT_GPIO_REG(EXT_GPIO_PBASE)
|
||||
|
||||
#define AAED_EGPIO_KBD_SCAN 0x00003fff /* Keyboard scan data */
|
||||
#define AAED_EGPIO_PWR_INT 0x00008fff /* Smart battery charger interrupt */
|
||||
#define AAED_EGPIO_SWITCHED 0x000f0000 /* DIP Switches */
|
||||
#define AAED_EGPIO_USB_VBUS 0x00400000 /* USB Vbus sense */
|
||||
#define AAED_EGPIO_LCD_PWR_EN 0x02000000 /* LCD and backlight PWR enable */
|
||||
#define AAED_EGPIO_nLED0 0x20000000 /* LED 0 */
|
||||
#define AAED_EGPIO_nLED1 0x20000000 /* LED 1 */
|
||||
#define AAED_EGPIO_nLED2 0x20000000 /* LED 2 */
|
||||
|
||||
|
||||
#endif /* __ARM_ARCH_AAED2000_H */
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
/* arch/arm/mach-aaec2000/include/mach/debug-macro.S
|
||||
*
|
||||
* Debugging macro include header
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "hardware.h"
|
||||
.macro addruart, rp, rv
|
||||
mov \rp, 0x00000800
|
||||
orr \rv, \rp, #io_p2v(0x80000000) @ virtual
|
||||
orr \rp, \rp, #0x80000000 @ physical
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
str \rd, [\rx, #0]
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldr \rd, [\rx, #0x10]
|
||||
tst \rd, #(1 << 7)
|
||||
beq 1002b
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
#if 0
|
||||
1001: ldr \rd, [\rx, #0x10]
|
||||
tst \rd, #(1 << 5)
|
||||
beq 1001b
|
||||
#endif
|
||||
.endm
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/entry-macro.S
|
||||
*
|
||||
* Low-level IRQ helper for aaec-2000 based platforms
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
#include <mach/irqs.h>
|
||||
|
||||
.macro disable_fiq
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_preamble, base, tmp
|
||||
.endm
|
||||
|
||||
.macro arch_ret_to_user, tmp1, tmp2
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
||||
mov r4, #0xf8000000
|
||||
add r4, r4, #0x00000500
|
||||
mov \base, r4
|
||||
ldr \irqstat, [\base, #0]
|
||||
cmp \irqstat, #0
|
||||
bne 1001f
|
||||
ldr \irqnr, =NR_IRQS+1
|
||||
b 1003f
|
||||
1001: mov \irqnr, #0
|
||||
1002: ands \tmp, \irqstat, #1
|
||||
mov \irqstat, \irqstat, LSR #1
|
||||
add \irqnr, \irqnr, #1
|
||||
beq 1002b
|
||||
sub \irqnr, \irqnr, #1
|
||||
1003:
|
||||
.endm
|
||||
|
|
@ -1,50 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/hardware.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_HARDWARE_H
|
||||
#define __ASM_ARCH_HARDWARE_H
|
||||
|
||||
#include <asm/sizes.h>
|
||||
#include <mach/aaec2000.h>
|
||||
|
||||
/* The kernel is loaded at physical address 0xf8000000.
|
||||
* We map the IO space a bit after
|
||||
*/
|
||||
#define PIO_APB_BASE 0x80000000
|
||||
#define VIO_APB_BASE 0xf8000000
|
||||
#define IO_APB_LENGTH 0x2000
|
||||
#define PIO_AHB_BASE 0x80002000
|
||||
#define VIO_AHB_BASE 0xf8002000
|
||||
#define IO_AHB_LENGTH 0x2000
|
||||
|
||||
#define VIO_BASE VIO_APB_BASE
|
||||
#define PIO_BASE PIO_APB_BASE
|
||||
|
||||
#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
|
||||
#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#include <asm/types.h>
|
||||
|
||||
/* FIXME: Is it needed to optimize this a la pxa ?? */
|
||||
#define __REG(x) (*((volatile u32 *)io_p2v(x)))
|
||||
#define __PREG(x) (io_v2p((u32)&(x)))
|
||||
|
||||
#else /* __ASSEMBLY__ */
|
||||
|
||||
#define __REG(x) io_p2v(x)
|
||||
#define __PREG(x) io_v2p(x)
|
||||
|
||||
#endif
|
||||
|
||||
#include "aaec2000.h"
|
||||
|
||||
#endif /* __ASM_ARCH_HARDWARE_H */
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/io.h
|
||||
*
|
||||
* Copied from asm/arch/sa1100/io.h
|
||||
*/
|
||||
#ifndef __ASM_ARM_ARCH_IO_H
|
||||
#define __ASM_ARM_ARCH_IO_H
|
||||
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
/*
|
||||
* We don't actually have real ISA nor PCI buses, but there is so many
|
||||
* drivers out there that might just work if we fake them...
|
||||
*/
|
||||
#define __io(a) __typesafe_io(a)
|
||||
#define __mem_pci(a) (a)
|
||||
|
||||
#endif
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/irqs.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_IRQS_H
|
||||
#define __ASM_ARCH_IRQS_H
|
||||
|
||||
|
||||
#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
|
||||
#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
|
||||
#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
|
||||
#define INT_MV_FIQ 3 /* Media Changed Interrupt */
|
||||
#define INT_SC 4 /* Sound Codec Interrupt */
|
||||
#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
|
||||
#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
|
||||
#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
|
||||
#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
|
||||
#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
|
||||
#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
|
||||
#define INT_TICK 11 /* 64Hz Tick Interrupt */
|
||||
#define INT_UART1 12 /* UART1 Interrupt */
|
||||
#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
|
||||
#define INT_LCD 14 /* LCD Interrupt */
|
||||
#define INT_SSI 15 /* SSI End of Transfer Interrupt */
|
||||
#define INT_UART3 16 /* UART3 Interrupt */
|
||||
#define INT_SCI 17 /* SCI Interrupt */
|
||||
#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
|
||||
#define INT_MMC 19 /* MMC Interrupt */
|
||||
#define INT_USB 20 /* USB Interrupt */
|
||||
#define INT_DMA 21 /* DMA Interrupt */
|
||||
#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
|
||||
#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_BMI 27 /* BMI Interrupt */
|
||||
|
||||
#define NR_IRQS (INT_BMI + 1)
|
||||
|
||||
#endif /* __ASM_ARCH_IRQS_H */
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/memory.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_MEMORY_H
|
||||
#define __ASM_ARCH_MEMORY_H
|
||||
|
||||
|
||||
#define PHYS_OFFSET UL(0xf0000000)
|
||||
|
||||
#endif /* __ASM_ARCH_MEMORY_H */
|
||||
|
|
@ -1,24 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaed2000/include/mach/system.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_SYSTEM_H
|
||||
#define __ASM_ARCH_SYSTEM_H
|
||||
|
||||
static inline void arch_idle(void)
|
||||
{
|
||||
cpu_do_idle();
|
||||
}
|
||||
|
||||
static inline void arch_reset(char mode, const char *cmd)
|
||||
{
|
||||
cpu_reset(0);
|
||||
}
|
||||
|
||||
#endif /* __ASM_ARCH_SYSTEM_H */
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/timex.h
|
||||
*
|
||||
* AAEC-2000 Architecture timex specification
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TIMEX_H
|
||||
#define __ASM_ARCH_TIMEX_H
|
||||
|
||||
#define CLOCK_TICK_RATE 508000
|
||||
|
||||
#endif /* __ASM_ARCH_TIMEX_H */
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/uncompress.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_UNCOMPRESS_H
|
||||
#define __ASM_ARCH_UNCOMPRESS_H
|
||||
|
||||
#include "hardware.h"
|
||||
|
||||
#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
|
||||
|
||||
static void putc(int c)
|
||||
{
|
||||
unsigned long serial_port;
|
||||
do {
|
||||
serial_port = _UART3_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
serial_port = _UART1_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
serial_port = _UART2_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
return;
|
||||
} while (0);
|
||||
|
||||
/* wait for space in the UART's transmitter */
|
||||
while ((UART(UART_SR) & UART_SR_TxFF))
|
||||
barrier();
|
||||
|
||||
/* send the character out. */
|
||||
UART(UART_DR) = c;
|
||||
}
|
||||
|
||||
static inline void flush(void)
|
||||
{
|
||||
}
|
||||
|
||||
#define arch_decomp_setup()
|
||||
#define arch_decomp_wdog()
|
||||
|
||||
#endif /* __ASM_ARCH_UNCOMPRESS_H */
|
||||
|
|
@ -1,16 +0,0 @@
|
|||
/*
|
||||
* arch/arm/mach-aaec2000/include/mach/vmalloc.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_VMALLOC_H
|
||||
#define __ASM_ARCH_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END 0xd0000000UL
|
||||
|
||||
#endif /* __ASM_ARCH_VMALLOC_H */
|
||||
Loading…
Reference in New Issue