UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'samsung_dma' of git://git.infradead.org/users/vkoul/slave-dma into next/topic-dma-samsung

This commit is contained in:
Kukjin Kim 2011-09-19 10:26:54 +09:00
parent b6fd41e29d 51ddf31da1
commit 219c8c866c
49 changed files with 2056 additions and 2297 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/include/asm/hardware/pl080.h
View File

@ -21,6 +21,9 @@
* OneNAND features.
*/
#ifndef ASM_PL080_H
#define ASM_PL080_H
#define PL080_INT_STATUS (0x00)
#define PL080_TC_STATUS (0x04)
#define PL080_TC_CLEAR (0x08)
@ -138,3 +141,4 @@ struct pl080s_lli {
u32 control1;
};
#endif /* ASM_PL080_H */

2
arch/arm/mach-exynos4/Kconfig
View File

@ -11,7 +11,7 @@ if ARCH_EXYNOS4
config CPU_EXYNOS4210
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support

11
arch/arm/mach-exynos4/clock.c
View File

@ -43,6 +43,11 @@ static struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
@ -454,12 +459,12 @@ static struct clk init_clocks_off[] = {
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.1",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 1),
@ -1210,5 +1215,7 @@ void __init exynos4_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

299
arch/arm/mach-exynos4/dma.c
View File

@ -21,151 +21,228 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/s3c-pl330-pdata.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource exynos4_pdma0_resource[] = {
[0] = {
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA0,
.end = IRQ_PDMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma0_peri[28] = {
{
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ0,
}, {
.peri_id = (u8)DMACH_MSM_REQ2,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_AC97_MICIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMOUT,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
[2] = DMACH_PCM2_RX,
[3] = DMACH_PCM2_TX,
[4] = DMACH_MSM_REQ0,
[5] = DMACH_MSM_REQ2,
[6] = DMACH_SPI0_RX,
[7] = DMACH_SPI0_TX,
[8] = DMACH_SPI2_RX,
[9] = DMACH_SPI2_TX,
[10] = DMACH_I2S0S_TX,
[11] = DMACH_I2S0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S2_RX,
[14] = DMACH_I2S2_TX,
[15] = DMACH_UART0_RX,
[16] = DMACH_UART0_TX,
[17] = DMACH_UART2_RX,
[18] = DMACH_UART2_TX,
[19] = DMACH_UART4_RX,
[20] = DMACH_UART4_TX,
[21] = DMACH_SLIMBUS0_RX,
[22] = DMACH_SLIMBUS0_TX,
[23] = DMACH_SLIMBUS2_RX,
[24] = DMACH_SLIMBUS2_TX,
[25] = DMACH_SLIMBUS4_RX,
[26] = DMACH_SLIMBUS4_TX,
[27] = DMACH_AC97_MICIN,
[28] = DMACH_AC97_PCMIN,
[29] = DMACH_AC97_PCMOUT,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata exynos4_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri = pdma0_peri,
};
static struct platform_device exynos4_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(exynos4_pdma0_resource),
.resource = exynos4_pdma0_resource,
.dev = {
struct amba_device exynos4_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma0_pdata,
},
.res = {
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
static struct resource exynos4_pdma1_resource[] = {
[0] = {
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA1,
.end = IRQ_PDMA1,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma1_peri[25] = {
{
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ1,
}, {
.peri_id = (u8)DMACH_MSM_REQ3,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SLIMBUS5_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SLIMBUS5_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
[2] = DMACH_PCM1_RX,
[3] = DMACH_PCM1_TX,
[4] = DMACH_MSM_REQ1,
[5] = DMACH_MSM_REQ3,
[6] = DMACH_SPI1_RX,
[7] = DMACH_SPI1_TX,
[8] = DMACH_I2S0S_TX,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S1_RX,
[12] = DMACH_I2S1_TX,
[13] = DMACH_UART0_RX,
[14] = DMACH_UART0_TX,
[15] = DMACH_UART1_RX,
[16] = DMACH_UART1_TX,
[17] = DMACH_UART3_RX,
[18] = DMACH_UART3_TX,
[19] = DMACH_SLIMBUS1_RX,
[20] = DMACH_SLIMBUS1_TX,
[21] = DMACH_SLIMBUS3_RX,
[22] = DMACH_SLIMBUS3_TX,
[23] = DMACH_SLIMBUS5_RX,
[24] = DMACH_SLIMBUS5_TX,
[25] = DMACH_SLIMBUS0AUX_RX,
[26] = DMACH_SLIMBUS0AUX_TX,
[27] = DMACH_SPDIF,
[28] = DMACH_MAX,
[29] = DMACH_MAX,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata exynos4_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri = pdma1_peri,
};
static struct platform_device exynos4_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(exynos4_pdma1_resource),
.resource = exynos4_pdma1_resource,
.dev = {
struct amba_device exynos4_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &exynos4_pdma1_pdata,
},
};
static struct platform_device *exynos4_dmacs[] __initdata = {
&exynos4_device_pdma0,
&exynos4_device_pdma1,
.res = {
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
static int __init exynos4_dma_init(void)
{
platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
amba_device_register(&exynos4_device_pdma0, &iomem_resource);
return 0;
}

4
arch/arm/mach-exynos4/include/mach/dma.h
View File

@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
#include <plat/s3c-dma-pl330.h>
/* This platform uses the common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */

20
arch/arm/mach-s3c2410/include/mach/dma.h
View File

@ -13,7 +13,6 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
#include <plat/dma.h>
#include <linux/sysdev.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
@ -51,6 +50,18 @@ enum dma_ch {
DMACH_MAX, /* the end entry */
};
static inline bool samsung_dma_has_circular(void)
{
return false;
}
static inline bool samsung_dma_is_dmadev(void)
{
return false;
}
#include <plat/dma.h>
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
@ -163,7 +174,7 @@ struct s3c2410_dma_chan {
struct s3c2410_dma_client *client;
/* channel configuration */
enum s3c2410_dmasrc source;
enum dma_data_direction source;
enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
@ -196,9 +207,4 @@ struct s3c2410_dma_chan {
typedef unsigned long dma_device_t;
static inline bool s3c_dma_has_circular(void)
{
return false;
}
#endif /* __ASM_ARCH_DMA_H */

4
arch/arm/mach-s3c2412/dma.c
View File

@ -148,11 +148,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
enum s3c2410_dmasrc dir)
enum dma_data_direction dir)
{
unsigned long chsel;
if (dir == S3C2410_DMASRC_HW)
if (dir == DMA_FROM_DEVICE)
chsel = map->channels_rx[0];
else
chsel = map->channels[0];

10
arch/arm/mach-s3c64xx/dma.c
View File

@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
u32 control0, control1;
switch (chan->source) {
case S3C2410_DMASRC_HW:
case DMA_FROM_DEVICE:
src = chan->dev_addr;
dst = data;
control0 = PL080_CONTROL_SRC_AHB2;
control0 |= PL080_CONTROL_DST_INCR;
break;
case S3C2410_DMASRC_MEM:
case DMA_TO_DEVICE:
src = data;
dst = chan->dev_addr;
control0 = PL080_CONTROL_DST_AHB2;
@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue);
int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source,
enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
pr_debug("%s: peripheral %d\n", __func__, peripheral);
switch (source) {
case S3C2410_DMASRC_HW:
case DMA_FROM_DEVICE:
config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
break;
case S3C2410_DMASRC_MEM:
case DMA_TO_DEVICE:
config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
break;

8
arch/arm/mach-s3c64xx/include/mach/dma.h
View File

@ -58,11 +58,15 @@ enum dma_ch {
DMACH_MAX /* the end */
};
static __inline__ bool s3c_dma_has_circular(void)
static inline bool samsung_dma_has_circular(void)
{
return true;
}
static inline bool samsung_dma_is_dmadev(void)
{
return false;
}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
#include <plat/dma.h>
@ -95,7 +99,7 @@ struct s3c2410_dma_chan {
unsigned char peripheral;
unsigned int flags;
enum s3c2410_dmasrc source;
enum dma_data_direction source;
dma_addr_t dev_addr;

4
arch/arm/mach-s5p64x0/Kconfig
View File

@ -9,14 +9,14 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
select S5P_HRT
help
Enable S5P6450 CPU support

9
arch/arm/mach-s5p64x0/clock-s5p6440.c
View File

@ -146,7 +146,7 @@ static struct clk init_clocks_off[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 8),
}, {
.name = "pdma",
.name = "dma",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@ -499,6 +499,11 @@ static struct clksrc_clk *sysclks[] = {
&clk_pclk_low,
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
@ -581,5 +586,7 @@ void __init s5p6440_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

9
arch/arm/mach-s5p64x0/clock-s5p6450.c
View File

@ -179,7 +179,7 @@ static struct clk init_clocks_off[] = {
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pdma",
.name = "dma",
.parent = &clk_hclk_low.clk,
.enable = s5p64x0_hclk0_ctrl,
.ctrlbit = (1 << 12),
@ -553,6 +553,11 @@ static struct clksrc_clk *sysclks[] = {
&clk_sclk_audio0,
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
void __init_or_cpufreq s5p6450_setup_clocks(void)
{
struct clk *xtal_clk;
@ -632,5 +637,7 @@ void __init s5p6450_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

273
arch/arm/mach-s5p64x0/dma.c
View File

@ -21,128 +21,219 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
#include <mach/dma.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
#include <plat/irqs.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5p64x0_pdma_resource[] = {
[0] = {
.start = S5P64X0_PA_PDMA,
.end = S5P64X0_PA_PDMA + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_DMA0,
.end = IRQ_DMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri s5p6440_pdma_peri[22] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
},
};
static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_MAX,
[9] = DMACH_MAX,
[10] = DMACH_PCM0_TX,
[11] = DMACH_PCM0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S0_RX,
[14] = DMACH_SPI0_TX,
[15] = DMACH_SPI0_RX,
[16] = DMACH_MAX,
[17] = DMACH_MAX,
[18] = DMACH_MAX,
[19] = DMACH_MAX,
[20] = DMACH_SPI1_TX,
[21] = DMACH_SPI1_RX,
[22] = DMACH_MAX,
[23] = DMACH_MAX,
[24] = DMACH_MAX,
[25] = DMACH_MAX,
[26] = DMACH_MAX,
[27] = DMACH_MAX,
[28] = DMACH_MAX,
[29] = DMACH_PWM,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
.peri = s5p6440_pdma_peri,
};
struct dma_pl330_peri s5p6450_pdma_peri[32] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART4_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART4_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_USI_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_USI_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PWM,
}, {
.peri_id = (u8)DMACH_UART5_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART5_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_UART4_RX,
[9] = DMACH_UART4_TX,
[10] = DMACH_PCM0_TX,
[11] = DMACH_PCM0_RX,
[12] = DMACH_I2S0_TX,
[13] = DMACH_I2S0_RX,
[14] = DMACH_SPI0_TX,
[15] = DMACH_SPI0_RX,
[16] = DMACH_PCM1_TX,
[17] = DMACH_PCM1_RX,
[18] = DMACH_PCM2_TX,
[19] = DMACH_PCM2_RX,
[20] = DMACH_SPI1_TX,
[21] = DMACH_SPI1_RX,
[22] = DMACH_USI_TX,
[23] = DMACH_USI_RX,
[24] = DMACH_MAX,
[25] = DMACH_I2S1_TX,
[26] = DMACH_I2S1_RX,
[27] = DMACH_I2S2_TX,
[28] = DMACH_I2S2_RX,
[29] = DMACH_PWM,
[30] = DMACH_UART5_RX,
[31] = DMACH_UART5_TX,
},
struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
.peri = s5p6450_pdma_peri,
};
static struct platform_device s5p64x0_device_pdma = {
.name = "s3c-pl330",
.id = -1,
.num_resources = ARRAY_SIZE(s5p64x0_pdma_resource),
.resource = s5p64x0_pdma_resource,
.dev = {
struct amba_device s5p64x0_device_pdma = {
.dev = {
.init_name = "dma-pl330",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.res = {
.start = S5P64X0_PA_PDMA,
.end = S5P64X0_PA_PDMA + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_DMA0, NO_IRQ},
.periphid = 0x00041330,
};
static int __init s5p64x0_dma_init(void)
{
unsigned int id;
id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
unsigned int id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
if (id == 0x50000)
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
platform_device_register(&s5p64x0_device_pdma);
amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
return 0;
}

4
arch/arm/mach-s5p64x0/include/mach/dma.h
View File

@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
#include <plat/s3c-dma-pl330.h>
/* This platform uses the common common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */

2
arch/arm/mach-s5pc100/Kconfig
View File

@ -10,7 +10,7 @@ if ARCH_S5PC100
config CPU_S5PC100
bool
select S5P_EXT_INT
select S3C_PL330_DMA
select SAMSUNG_DMADEV
help
Enable S5PC100 CPU support

11
arch/arm/mach-s5pc100/clock.c
View File

@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = {
.name = "otg_phy",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static struct clk *clk_src_mout_href_list[] = {
[0] = &s5p_clk_27m,
[1] = &clk_fin_hpll,
@ -454,13 +459,13 @@ static struct clk init_clocks_off[] = {
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 2),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.1",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
.ctrlbit = (1 << 1),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.0",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

323
arch/arm/mach-s5pc100/dma.c
View File

@ -1,4 +1,8 @@
/*
/* linux/arch/arm/mach-s5pc100/dma.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@ -17,150 +21,245 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/s3c-pl330-pdata.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5pc100_pdma0_resource[] = {
[0] = {
.start = S5PC100_PA_PDMA0,
.end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA0,
.end = IRQ_PDMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma0_peri[30] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_IRDA,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_AC97_MICIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMOUT,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_EXTERNAL,
}, {
.peri_id = (u8)DMACH_PWM,
}, {
.peri_id = (u8)DMACH_SPDIF,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_HSI_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_HSI_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_IRDA,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_I2S2_RX,
[15] = DMACH_I2S2_TX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_SPI2_RX,
[21] = DMACH_SPI2_TX,
[22] = DMACH_AC97_MICIN,
[23] = DMACH_AC97_PCMIN,
[24] = DMACH_AC97_PCMOUT,
[25] = DMACH_EXTERNAL,
[26] = DMACH_PWM,
[27] = DMACH_SPDIF,
[28] = DMACH_HSI_RX,
[29] = DMACH_HSI_TX,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri = pdma0_peri,
};
static struct platform_device s5pc100_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(s5pc100_pdma0_resource),
.resource = s5pc100_pdma0_resource,
.dev = {
struct amba_device s5pc100_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma0_pdata,
},
};
static struct resource s5pc100_pdma1_resource[] = {
[0] = {
.start = S5PC100_PA_PDMA1,
.end = S5PC100_PA_PDMA1 + SZ_4K,
.res = {
.start = S5PC100_PA_PDMA0,
.end = S5PC100_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA1,
.end = IRQ_PDMA1,
.flags = IORESOURCE_IRQ,
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
struct dma_pl330_peri pdma1_peri[30] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_IRDA,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ0,
}, {
.peri_id = (u8)DMACH_MSM_REQ1,
}, {
.peri_id = (u8)DMACH_MSM_REQ2,
}, {
.peri_id = (u8)DMACH_MSM_REQ3,
},
};
static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_IRDA,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_I2S2_RX,
[15] = DMACH_I2S2_TX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_SPI2_RX,
[21] = DMACH_SPI2_TX,
[22] = DMACH_PCM0_RX,
[23] = DMACH_PCM0_TX,
[24] = DMACH_PCM1_RX,
[25] = DMACH_PCM1_TX,
[26] = DMACH_MSM_REQ0,
[27] = DMACH_MSM_REQ1,
[28] = DMACH_MSM_REQ2,
[29] = DMACH_MSM_REQ3,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri = pdma1_peri,
};
static struct platform_device s5pc100_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(s5pc100_pdma1_resource),
.resource = s5pc100_pdma1_resource,
.dev = {
struct amba_device s5pc100_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_pdma1_pdata,
},
};
static struct platform_device *s5pc100_dmacs[] __initdata = {
&s5pc100_device_pdma0,
&s5pc100_device_pdma1,
.res = {
.start = S5PC100_PA_PDMA1,
.end = S5PC100_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
static int __init s5pc100_dma_init(void)
{
platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
return 0;
}

4
arch/arm/mach-s5pc100/include/mach/dma.h
View File

@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
#include <plat/s3c-dma-pl330.h>
/* This platform uses the common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */

2
arch/arm/mach-s5pv210/Kconfig
View File

@ -11,7 +11,7 @@ if ARCH_S5PV210
config CPU_S5PV210
bool
select S3C_PL330_DMA
select SAMSUNG_DMADEV
select S5P_EXT_INT
select S5P_HRT
select S5PV210_PM if PM

10
arch/arm/mach-s5pv210/clock.c
View File

@ -203,6 +203,11 @@ static struct clk clk_pcmcdclk2 = {
.name = "pcmcdclk",
};
static struct clk dummy_apb_pclk = {
.name = "apb_pclk",
.id = -1,
};
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@ -289,13 +294,13 @@ static struct clk_ops clk_fout_apll_ops = {
static struct clk init_clocks_off[] = {
{
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.0",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "pdma",
.name = "dma",
.devname = "s3c-pl330.1",
.parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip0_ctrl,
@ -1161,5 +1166,6 @@ void __init s5pv210_register_clocks(void)
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}

316
arch/arm/mach-s5pv210/dma.c
View File

@ -1,4 +1,8 @@
/*
/* linux/arch/arm/mach-s5pv210/dma.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
@ -17,151 +21,239 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/s3c-pl330-pdata.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5pv210_pdma0_resource[] = {
[0] = {
.start = S5PV210_PA_PDMA0,
.end = S5PV210_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA0,
.end = IRQ_PDMA0,
.flags = IORESOURCE_IRQ,
struct dma_pl330_peri pdma0_peri[28] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_AC97_MICIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMIN,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_AC97_PCMOUT,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_PWM,
}, {
.peri_id = (u8)DMACH_SPDIF,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_MAX,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_MAX,
[15] = DMACH_MAX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_MAX,
[21] = DMACH_MAX,
[22] = DMACH_AC97_MICIN,
[23] = DMACH_AC97_PCMIN,
[24] = DMACH_AC97_PCMOUT,
[25] = DMACH_MAX,
[26] = DMACH_PWM,
[27] = DMACH_SPDIF,
[28] = DMACH_MAX,
[29] = DMACH_MAX,
[30] = DMACH_MAX,
[31] = DMACH_MAX,
},
struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri = pdma0_peri,
};
static struct platform_device s5pv210_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
.resource = s5pv210_pdma0_resource,
.dev = {
struct amba_device s5pv210_device_pdma0 = {
.dev = {
.init_name = "dma-pl330.0",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma0_pdata,
},
};
static struct resource s5pv210_pdma1_resource[] = {
[0] = {
.start = S5PV210_PA_PDMA1,
.end = S5PV210_PA_PDMA1 + SZ_4K,
.res = {
.start = S5PV210_PA_PDMA0,
.end = S5PV210_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PDMA1,
.end = IRQ_PDMA1,
.flags = IORESOURCE_IRQ,
.irq = {IRQ_PDMA0, NO_IRQ},
.periphid = 0x00041330,
};
struct dma_pl330_peri pdma1_peri[32] = {
{
.peri_id = (u8)DMACH_UART0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_UART3_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_UART3_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = DMACH_MAX,
}, {
.peri_id = (u8)DMACH_I2S0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S0S_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_I2S2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_I2S2_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_SPI1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_SPI1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_MAX,
}, {
.peri_id = (u8)DMACH_PCM0_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM0_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_PCM1_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM1_TX,
.rqtype = MEMTODEV,
}, {
.peri_id = (u8)DMACH_MSM_REQ0,
}, {
.peri_id = (u8)DMACH_MSM_REQ1,
}, {
.peri_id = (u8)DMACH_MSM_REQ2,
}, {
.peri_id = (u8)DMACH_MSM_REQ3,
}, {
.peri_id = (u8)DMACH_PCM2_RX,
.rqtype = DEVTOMEM,
}, {
.peri_id = (u8)DMACH_PCM2_TX,
.rqtype = MEMTODEV,
},
};
static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
.peri = {
[0] = DMACH_UART0_RX,
[1] = DMACH_UART0_TX,
[2] = DMACH_UART1_RX,
[3] = DMACH_UART1_TX,
[4] = DMACH_UART2_RX,
[5] = DMACH_UART2_TX,
[6] = DMACH_UART3_RX,
[7] = DMACH_UART3_TX,
[8] = DMACH_MAX,
[9] = DMACH_I2S0_RX,
[10] = DMACH_I2S0_TX,
[11] = DMACH_I2S0S_TX,
[12] = DMACH_I2S1_RX,
[13] = DMACH_I2S1_TX,
[14] = DMACH_I2S2_RX,
[15] = DMACH_I2S2_TX,
[16] = DMACH_SPI0_RX,
[17] = DMACH_SPI0_TX,
[18] = DMACH_SPI1_RX,
[19] = DMACH_SPI1_TX,
[20] = DMACH_MAX,
[21] = DMACH_MAX,
[22] = DMACH_PCM0_RX,
[23] = DMACH_PCM0_TX,
[24] = DMACH_PCM1_RX,
[25] = DMACH_PCM1_TX,
[26] = DMACH_MSM_REQ0,
[27] = DMACH_MSM_REQ1,
[28] = DMACH_MSM_REQ2,
[29] = DMACH_MSM_REQ3,
[30] = DMACH_PCM2_RX,
[31] = DMACH_PCM2_TX,
},
struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri = pdma1_peri,
};
static struct platform_device s5pv210_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
.resource = s5pv210_pdma1_resource,
.dev = {
struct amba_device s5pv210_device_pdma1 = {
.dev = {
.init_name = "dma-pl330.1",
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_pdma1_pdata,
},
};
static struct platform_device *s5pv210_dmacs[] __initdata = {
&s5pv210_device_pdma0,
&s5pv210_device_pdma1,
.res = {
.start = S5PV210_PA_PDMA1,
.end = S5PV210_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_PDMA1, NO_IRQ},
.periphid = 0x00041330,
};
static int __init s5pv210_dma_init(void)
{
platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
return 0;
}

4
arch/arm/mach-s5pv210/include/mach/dma.h
View File

@ -20,7 +20,7 @@
#ifndef __MACH_DMA_H
#define __MACH_DMA_H
/* This platform uses the common S3C DMA API driver for PL330 */
#include <plat/s3c-dma-pl330.h>
/* This platform uses the common DMA API driver for PL330 */
#include <plat/dma-pl330.h>
#endif /* __MACH_DMA_H */

10
arch/arm/plat-s3c24xx/dma.c
View File

@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config);
*
* configure the dma source/destination hardware type and address
*
* source: S3C2410_DMASRC_HW: source is hardware
* S3C2410_DMASRC_MEM: source is memory
* source: DMA_FROM_DEVICE: source is hardware
* DMA_TO_DEVICE: source is memory
*
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source,
enum dma_data_direction source,
unsigned long devaddr)
{
struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
case S3C2410_DMASRC_HW:
case DMA_FROM_DEVICE:
/* source is hardware */
pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);
@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel,
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
break;
case S3C2410_DMASRC_MEM:
case DMA_TO_DEVICE:
/* source is memory */
pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
__func__, devaddr, hwcfg);

9
arch/arm/plat-samsung/Kconfig
View File

@ -300,11 +300,14 @@ config S3C_DMA
help
Internal configuration for S3C DMA core
config S3C_PL330_DMA
config SAMSUNG_DMADEV
bool
select PL330
select DMADEVICES
select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \
CPU_S5P6450 || CPU_S5P6440)
select ARM_AMBA
help
S3C DMA API Driver for PL330 DMAC.
Use DMA device engine for PL330 DMAC.
comment "Power management"

4
arch/arm/plat-samsung/Makefile
View File

@ -63,9 +63,9 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o
obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support

131
arch/arm/plat-samsung/dma-ops.c Normal file
View File

@ -0,0 +1,131 @@
/* linux/arch/arm/plat-samsung/dma-ops.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung DMA Operations
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/amba/pl330.h>
#include <linux/scatterlist.h>
#include <mach/dma.h>
static inline bool pl330_filter(struct dma_chan *chan, void *param)
{
struct dma_pl330_peri *peri = chan->private;
return peri->peri_id == (unsigned)param;
}
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct samsung_dma_info *info)
{
struct dma_chan *chan;
dma_cap_mask_t mask;
struct dma_slave_config slave_config;
dma_cap_zero(mask);
dma_cap_set(info->cap, mask);
chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
if (info->direction == DMA_FROM_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
slave_config.direction = info->direction;
slave_config.src_addr = info->fifo;
slave_config.src_addr_width = info->width;
slave_config.src_maxburst = 1;
dmaengine_slave_config(chan, &slave_config);
} else if (info->direction == DMA_TO_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
slave_config.direction = info->direction;
slave_config.dst_addr = info->fifo;
slave_config.dst_addr_width = info->width;
slave_config.dst_maxburst = 1;
dmaengine_slave_config(chan, &slave_config);
}
return (unsigned)chan;
}
static int samsung_dmadev_release(unsigned ch,
struct s3c2410_dma_client *client)
{
dma_release_channel((struct dma_chan *)ch);
return 0;
}
static int samsung_dmadev_prepare(unsigned ch,
struct samsung_dma_prep_info *info)
{
struct scatterlist sg;
struct dma_chan *chan = (struct dma_chan *)ch;
struct dma_async_tx_descriptor *desc;
switch (info->cap) {
case DMA_SLAVE:
sg_init_table(&sg, 1);
sg_dma_len(&sg) = info->len;
sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)),
info->len, offset_in_page(info->buf));
sg_dma_address(&sg) = info->buf;
desc = chan->device->device_prep_slave_sg(chan,
&sg, 1, info->direction, DMA_PREP_INTERRUPT);
break;
case DMA_CYCLIC:
desc = chan->device->device_prep_dma_cyclic(chan,
info->buf, info->len, info->period, info->direction);
break;
default:
dev_err(&chan->dev->device, "unsupported format\n");
return -EFAULT;
}
if (!desc) {
dev_err(&chan->dev->device, "cannot prepare cyclic dma\n");
return -EFAULT;
}
desc->callback = info->fp;
desc->callback_param = info->fp_param;
dmaengine_submit((struct dma_async_tx_descriptor *)desc);
return 0;
}
static inline int samsung_dmadev_trigger(unsigned ch)
{
dma_async_issue_pending((struct dma_chan *)ch);
return 0;
}
static inline int samsung_dmadev_flush(unsigned ch)
{
return dmaengine_terminate_all((struct dma_chan *)ch);
}
struct samsung_dma_ops dmadev_ops = {
.request = samsung_dmadev_request,
.release = samsung_dmadev_release,
.prepare = samsung_dmadev_prepare,
.trigger = samsung_dmadev_trigger,
.started = NULL,
.flush = samsung_dmadev_flush,
.stop = samsung_dmadev_flush,
};
void *samsung_dmadev_get_ops(void)
{
return &dmadev_ops;
}
EXPORT_SYMBOL(samsung_dmadev_get_ops);

63
arch/arm/plat-samsung/include/plat/dma-ops.h Normal file
View File

@ -0,0 +1,63 @@
/* arch/arm/plat-samsung/include/plat/dma-ops.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __SAMSUNG_DMA_OPS_H_
#define __SAMSUNG_DMA_OPS_H_ __FILE__
#include <linux/dmaengine.h>
struct samsung_dma_prep_info {
enum dma_transaction_type cap;
enum dma_data_direction direction;
dma_addr_t buf;
unsigned long period;
unsigned long len;
void (*fp)(void *data);
void *fp_param;
};
struct samsung_dma_info {
enum dma_transaction_type cap;
enum dma_data_direction direction;
enum dma_slave_buswidth width;
dma_addr_t fifo;
struct s3c2410_dma_client *client;
};
struct samsung_dma_ops {
unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info);
int (*release)(unsigned ch, struct s3c2410_dma_client *client);
int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info);
int (*trigger)(unsigned ch);
int (*started)(unsigned ch);
int (*flush)(unsigned ch);
int (*stop)(unsigned ch);
};
extern void *samsung_dmadev_get_ops(void);
extern void *s3c_dma_get_ops(void);
static inline void *__samsung_dma_get_ops(void)
{
if (samsung_dma_is_dmadev())
return samsung_dmadev_get_ops();
else
return s3c_dma_get_ops();
}
/*
* samsung_dma_get_ops
* get the set of samsung dma operations
*/
#define samsung_dma_get_ops() __samsung_dma_get_ops()
#endif /* __SAMSUNG_DMA_OPS_H_ */

24
arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h → arch/arm/plat-samsung/include/plat/dma-pl330.h
View File

@ -8,11 +8,8 @@
* (at your option) any later version.
*/
#ifndef __S3C_DMA_PL330_H_
#define __S3C_DMA_PL330_H_
#define S3C2410_DMAF_AUTOSTART (1 << 0)
#define S3C2410_DMAF_CIRCULAR (1 << 1)
#ifndef __DMA_PL330_H_
#define __DMA_PL330_H_ __FILE__
/*
* PL330 can assign any channel to communicate with
@ -20,7 +17,7 @@
* For the sake of consistency across client drivers,
* We keep the channel names unchanged and only add
* missing peripherals are added.
* Order is not important since S3C PL330 API driver
* Order is not important since DMA PL330 API driver
* use these just as IDs.
*/
enum dma_ch {
@ -88,11 +85,20 @@ enum dma_ch {
DMACH_MAX,
};
static inline bool s3c_dma_has_circular(void)
struct s3c2410_dma_client {
char *name;
};
static inline bool samsung_dma_has_circular(void)
{
return true;
}
#include <plat/dma.h>
static inline bool samsung_dma_is_dmadev(void)
{
return true;
}
#endif /* __S3C_DMA_PL330_H_ */
#include <plat/dma-ops.h>
#endif /* __DMA_PL330_H_ */

2
arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
View File

@ -47,7 +47,7 @@ struct s3c24xx_dma_selection {
void (*direction)(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map,
enum s3c2410_dmasrc dir);
enum dma_data_direction dir);
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);

10
arch/arm/plat-samsung/include/plat/dma.h
View File

@ -10,17 +10,14 @@
* published by the Free Software Foundation.
*/
#include <linux/dma-mapping.h>
enum s3c2410_dma_buffresult {
S3C2410_RES_OK,
S3C2410_RES_ERR,
S3C2410_RES_ABORT
};
enum s3c2410_dmasrc {
S3C2410_DMASRC_HW, /* source is memory */
S3C2410_DMASRC_MEM /* source is hardware */
};
/* enum s3c2410_chan_op
*
* operation codes passed to the DMA code by the user, and also used
@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit);
*/
extern int s3c2410_dma_devconfig(enum dma_ch channel,
enum s3c2410_dmasrc source, unsigned long devaddr);
enum dma_data_direction source, unsigned long devaddr);
/* s3c2410_dma_getposition
*
@ -126,3 +123,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn);
extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn);
#include <plat/dma-ops.h>

32
arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
View File

@ -1,32 +0,0 @@
/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __S3C_PL330_PDATA_H
#define __S3C_PL330_PDATA_H
#include <plat/s3c-dma-pl330.h>
/*
* Every PL330 DMAC has max 32 peripheral interfaces,
* of which some may be not be really used in your
* DMAC's configuration.
* Populate this array of 32 peri i/fs with relevant
* channel IDs for used peri i/f and DMACH_MAX for
* those unused.
*
* The platforms just need to provide this info
* to the S3C DMA API driver for PL330.
*/
struct s3c_pl330_platdata {
enum dma_ch peri[32];
};
#endif /* __S3C_PL330_PDATA_H */

130
arch/arm/plat-samsung/s3c-dma-ops.c Normal file
View File

@ -0,0 +1,130 @@
/* linux/arch/arm/plat-samsung/s3c-dma-ops.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung S3C-DMA Operations
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <mach/dma.h>
struct cb_data {
void (*fp) (void *);
void *fp_param;
unsigned ch;
struct list_head node;
};
static LIST_HEAD(dma_list);
static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param,
int size, enum s3c2410_dma_buffresult res)
{
struct cb_data *data = param;
data->fp(data->fp_param);
}
static unsigned s3c_dma_request(enum dma_ch dma_ch,
struct samsung_dma_info *info)
{
struct cb_data *data;
if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) {
s3c2410_dma_free(dma_ch, info->client);
return 0;
}
data = kzalloc(sizeof(struct cb_data), GFP_KERNEL);
data->ch = dma_ch;
list_add_tail(&data->node, &dma_list);
s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo);
if (info->cap == DMA_CYCLIC)
s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR);
s3c2410_dma_config(dma_ch, info->width);
return (unsigned)dma_ch;
}
static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client)
{
struct cb_data *data;
list_for_each_entry(data, &dma_list, node)
if (data->ch == ch)
break;
list_del(&data->node);
s3c2410_dma_free(ch, client);
kfree(data);
return 0;
}
static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info)
{
struct cb_data *data;
int len = (info->cap == DMA_CYCLIC) ? info->period : info->len;
list_for_each_entry(data, &dma_list, node)
if (data->ch == ch)
break;
if (!data->fp) {
s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb);
data->fp = info->fp;
data->fp_param = info->fp_param;
}
s3c2410_dma_enqueue(ch, (void *)data, info->buf, len);
return 0;
}
static inline int s3c_dma_trigger(unsigned ch)
{
return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START);
}
static inline int s3c_dma_started(unsigned ch)
{
return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED);
}
static inline int s3c_dma_flush(unsigned ch)
{
return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH);
}
static inline int s3c_dma_stop(unsigned ch)
{
return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP);
}
static struct samsung_dma_ops s3c_dma_ops = {
.request = s3c_dma_request,
.release = s3c_dma_release,
.prepare = s3c_dma_prepare,
.trigger = s3c_dma_trigger,
.started = s3c_dma_started,
.flush = s3c_dma_flush,
.stop = s3c_dma_stop,
};
void *s3c_dma_get_ops(void)
{
return &s3c_dma_ops;
}
EXPORT_SYMBOL(s3c_dma_get_ops);

1244
arch/arm/plat-samsung/s3c-pl330.c
View File

File diff suppressed because it is too large Load Diff

3
drivers/dma/Kconfig
View File

@ -193,7 +193,8 @@ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
config PL330_DMA
tristate "DMA API Driver for PL330"
select DMA_ENGINE
depends on PL330
depends on ARM_AMBA
select PL330
help
Select if your platform has one or more PL330 DMACs.
You need to provide platform specific settings via

455
drivers/dma/amba-pl08x.c
View File

@ -66,32 +66,29 @@
* after the final transfer signalled by LBREQ or LSREQ. The DMAC
* will then move to the next LLI entry.
*
* Only the former works sanely with scatter lists, so we only implement
* the DMAC flow control method. However, peripherals which use the LBREQ
* and LSREQ signals (eg, MMCI) are unable to use this mode, which through
* these hardware restrictions prevents them from using scatter DMA.
*
* Global TODO:
* - Break out common code from arch/arm/mach-s3c64xx and share
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/dmaengine.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl08x.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <asm/hardware/pl080.h>
#define DRIVER_NAME "pl08xdmac"
static struct amba_driver pl08x_amba_driver;
/**
* struct vendor_data - vendor-specific config parameters for PL08x derivatives
* @channels: the number of channels available in this variant
@ -126,7 +123,8 @@ struct pl08x_lli {
* @phy_chans: array of data for the physical channels
* @pool: a pool for the LLI descriptors
* @pool_ctr: counter of LLIs in the pool
* @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches
* @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
* fetches
* @mem_buses: set to indicate memory transfers on AHB2.
* @lock: a spinlock for this struct
*/
@ -149,14 +147,6 @@ struct pl08x_driver_data {
* PL08X specific defines
*/
/*
* Memory boundaries: the manual for PL08x says that the controller
* cannot read past a 1KiB boundary, so these defines are used to
* create transfer LLIs that do not cross such boundaries.
*/
#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */
#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT)
/* Size (bytes) of each LLI buffer allocated for one transfer */
# define PL08X_LLI_TSFR_SIZE 0x2000
@ -272,7 +262,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
writel(val, ch->base + PL080_CH_CONFIG);
}
/*
* pl08x_terminate_phy_chan() stops the channel, clears the FIFO and
* clears any pending interrupt status. This should not be used for
@ -407,6 +396,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
return NULL;
}
pm_runtime_get_sync(&pl08x->adev->dev);
return ch;
}
@ -420,6 +410,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
/* Stop the channel and clear its interrupts */
pl08x_terminate_phy_chan(pl08x, ch);
pm_runtime_put(&pl08x->adev->dev);
/* Mark it as free */
ch->serving = NULL;
spin_unlock_irqrestore(&ch->lock, flags);
@ -499,36 +491,30 @@ struct pl08x_lli_build_data {
};
/*
* Autoselect a master bus to use for the transfer this prefers the
* destination bus if both available if fixed address on one bus the
* other will be chosen
* Autoselect a master bus to use for the transfer. Slave will be the chosen as
* victim in case src & dest are not similarly aligned. i.e. If after aligning
* masters address with width requirements of transfer (by sending few byte by
* byte data), slave is still not aligned, then its width will be reduced to
* BYTE.
* - prefers the destination bus if both available
* - prefers bus with fixed address (i.e. peripheral)
*/
static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd,
struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl)
{
if (!(cctl & PL080_CONTROL_DST_INCR)) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
} else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else {
if (bd->dstbus.buswidth == 4) {
if (bd->dstbus.buswidth >= bd->srcbus.buswidth) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
} else if (bd->srcbus.buswidth == 4) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else if (bd->dstbus.buswidth == 2) {
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
} else if (bd->srcbus.buswidth == 2) {
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
} else {
/* bd->srcbus.buswidth == 1 */
*mbus = &bd->dstbus;
*sbus = &bd->srcbus;
*mbus = &bd->srcbus;
*sbus = &bd->dstbus;
}
}
}
@ -547,7 +533,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
llis_va[num_llis].cctl = cctl;
llis_va[num_llis].src = bd->srcbus.addr;
llis_va[num_llis].dst = bd->dstbus.addr;
llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
llis_va[num_llis].lli = llis_bus + (num_llis + 1) *
sizeof(struct pl08x_lli);
llis_va[num_llis].lli |= bd->lli_bus;
if (cctl & PL080_CONTROL_SRC_INCR)
@ -560,16 +547,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
bd->remainder -= len;
}
/*
* Return number of bytes to fill to boundary, or len.
* This calculation works for any value of addr.
*/
static inline size_t pl08x_pre_boundary(u32 addr, size_t len)
static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd,
u32 *cctl, u32 len, int num_llis, size_t *total_bytes)
{
size_t boundary_len = PL08X_BOUNDARY_SIZE -
(addr & (PL08X_BOUNDARY_SIZE - 1));
return min(boundary_len, len);
*cctl = pl08x_cctl_bits(*cctl, 1, 1, len);
pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl);
(*total_bytes) += len;
}
/*
@ -583,13 +566,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
struct pl08x_bus_data *mbus, *sbus;
struct pl08x_lli_build_data bd;
int num_llis = 0;
u32 cctl;
size_t max_bytes_per_lli;
size_t total_bytes = 0;
u32 cctl, early_bytes = 0;
size_t max_bytes_per_lli, total_bytes = 0;
struct pl08x_lli *llis_va;
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
&txd->llis_bus);
txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus);
if (!txd->llis_va) {
dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
return 0;
@ -619,55 +600,85 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
bd.srcbus.buswidth = bd.srcbus.maxwidth;
bd.dstbus.buswidth = bd.dstbus.maxwidth;
/*
* Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
*/
max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
PL080_CONTROL_TRANSFER_SIZE_MASK;
/* We need to count this down to zero */
bd.remainder = txd->len;
/*
* Choose bus to align to
* - prefers destination bus if both available
* - if fixed address on one bus chooses other
*/
pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n",
bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
bd.srcbus.buswidth,
bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
bd.dstbus.buswidth,
bd.remainder, max_bytes_per_lli);
bd.remainder);
dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
mbus == &bd.srcbus ? "src" : "dst",
sbus == &bd.srcbus ? "src" : "dst");
if (txd->len < mbus->buswidth) {
/* Less than a bus width available - send as single bytes */
while (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s single byte LLIs for a transfer of "
"less than a bus width (remain 0x%08x)\n",
__func__, bd.remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
}
} else {
/* Make one byte LLIs until master bus is aligned */
while ((mbus->addr) % (mbus->buswidth)) {
dev_vdbg(&pl08x->adev->dev,
"%s adjustment lli for less than bus width "
"(remain 0x%08x)\n",
__func__, bd.remainder);
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
/*
* Zero length is only allowed if all these requirements are met:
* - flow controller is peripheral.
* - src.addr is aligned to src.width
* - dst.addr is aligned to dst.width
*
* sg_len == 1 should be true, as there can be two cases here:
* - Memory addresses are contiguous and are not scattered. Here, Only
* one sg will be passed by user driver, with memory address and zero
* length. We pass this to controller and after the transfer it will
* receive the last burst request from peripheral and so transfer
* finishes.
*
* - Memory addresses are scattered and are not contiguous. Here,
* Obviously as DMA controller doesn't know when a lli's transfer gets
* over, it can't load next lli. So in this case, there has to be an
* assumption that only one lli is supported. Thus, we can't have
* scattered addresses.
*/
if (!bd.remainder) {
u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >>
PL080_CONFIG_FLOW_CONTROL_SHIFT;
if (!((fc >= PL080_FLOW_SRC2DST_DST) &&
(fc <= PL080_FLOW_SRC2DST_SRC))) {
dev_err(&pl08x->adev->dev, "%s sg len can't be zero",
__func__);
return 0;
}
if ((bd.srcbus.addr % bd.srcbus.buswidth) ||
(bd.srcbus.addr % bd.srcbus.buswidth)) {
dev_err(&pl08x->adev->dev,
"%s src & dst address must be aligned to src"
" & dst width if peripheral is flow controller",
__func__);
return 0;
}
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, 0);
pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl);
}
/*
* Send byte by byte for following cases
* - Less than a bus width available
* - until master bus is aligned
*/
if (bd.remainder < mbus->buswidth)
early_bytes = bd.remainder;
else if ((mbus->addr) % (mbus->buswidth)) {
early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth);
if ((bd.remainder - early_bytes) < mbus->buswidth)
early_bytes = bd.remainder;
}
if (early_bytes) {
dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs "
"(remain 0x%08x)\n", __func__, bd.remainder);
prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++,
&total_bytes);
}
if (bd.remainder) {
/*
* Master now aligned
* - if slave is not then we must set its width down
@ -680,138 +691,55 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
sbus->buswidth = 1;
}
/* Bytes transferred = tsize * src width, not MIN(buswidths) */
max_bytes_per_lli = bd.srcbus.buswidth *
PL080_CONTROL_TRANSFER_SIZE_MASK;
/*
* Make largest possible LLIs until less than one bus
* width left
*/
while (bd.remainder > (mbus->buswidth - 1)) {
size_t lli_len, target_len, tsize, odd_bytes;
size_t lli_len, tsize, width;
/*
* If enough left try to send max possible,
* otherwise try to send the remainder
*/
target_len = min(bd.remainder, max_bytes_per_lli);
lli_len = min(bd.remainder, max_bytes_per_lli);
/*
* Set bus lengths for incrementing buses to the
* number of bytes which fill to next memory boundary,
* limiting on the target length calculated above.
* Check against maximum bus alignment: Calculate actual
* transfer size in relation to bus width and get a
* maximum remainder of the highest bus width - 1
*/
if (cctl & PL080_CONTROL_SRC_INCR)
bd.srcbus.fill_bytes =
pl08x_pre_boundary(bd.srcbus.addr,
target_len);
else
bd.srcbus.fill_bytes = target_len;
width = max(mbus->buswidth, sbus->buswidth);
lli_len = (lli_len / width) * width;
tsize = lli_len / bd.srcbus.buswidth;
if (cctl & PL080_CONTROL_DST_INCR)
bd.dstbus.fill_bytes =
pl08x_pre_boundary(bd.dstbus.addr,
target_len);
else
bd.dstbus.fill_bytes = target_len;
dev_vdbg(&pl08x->adev->dev,
"%s fill lli with single lli chunk of "
"size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, bd.remainder);
/* Find the nearest */
lli_len = min(bd.srcbus.fill_bytes,
bd.dstbus.fill_bytes);
BUG_ON(lli_len > bd.remainder);
if (lli_len <= 0) {
dev_err(&pl08x->adev->dev,
"%s lli_len is %zu, <= 0\n",
__func__, lli_len);
return 0;
}
if (lli_len == target_len) {
/*
* Can send what we wanted.
* Maintain alignment
*/
lli_len = (lli_len/mbus->buswidth) *
mbus->buswidth;
odd_bytes = 0;
} else {
/*
* So now we know how many bytes to transfer
* to get to the nearest boundary. The next
* LLI will past the boundary. However, we
* may be working to a boundary on the slave
* bus. We need to ensure the master stays
* aligned, and that we are working in
* multiples of the bus widths.
*/
odd_bytes = lli_len % mbus->buswidth;
lli_len -= odd_bytes;
}
if (lli_len) {
/*
* Check against minimum bus alignment:
* Calculate actual transfer size in relation
* to bus width an get a maximum remainder of
* the smallest bus width - 1
*/
/* FIXME: use round_down()? */
tsize = lli_len / min(mbus->buswidth,
sbus->buswidth);
lli_len = tsize * min(mbus->buswidth,
sbus->buswidth);
if (target_len != lli_len) {
dev_vdbg(&pl08x->adev->dev,
"%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n",
__func__, target_len, lli_len, txd->len);
}
cctl = pl08x_cctl_bits(cctl,
bd.srcbus.buswidth,
bd.dstbus.buswidth,
tsize);
dev_vdbg(&pl08x->adev->dev,
"%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n",
__func__, lli_len, bd.remainder);
pl08x_fill_lli_for_desc(&bd, num_llis++,
lli_len, cctl);
total_bytes += lli_len;
}
if (odd_bytes) {
/*
* Creep past the boundary, maintaining
* master alignment
*/
int j;
for (j = 0; (j < mbus->buswidth)
&& (bd.remainder); j++) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
dev_vdbg(&pl08x->adev->dev,
"%s align with boundary, single byte (remain 0x%08zx)\n",
__func__, bd.remainder);
pl08x_fill_lli_for_desc(&bd,
num_llis++, 1, cctl);
total_bytes++;
}
}
cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth,
bd.dstbus.buswidth, tsize);
pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl);
total_bytes += lli_len;
}
/*
* Send any odd bytes
*/
while (bd.remainder) {
cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
if (bd.remainder) {
dev_vdbg(&pl08x->adev->dev,
"%s align with boundary, single odd byte (remain %zu)\n",
"%s align with boundary, send odd bytes (remain %zu)\n",
__func__, bd.remainder);
pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl);
total_bytes++;
prep_byte_width_lli(&bd, &cctl, bd.remainder,
num_llis++, &total_bytes);
}
}
if (total_bytes != txd->len) {
dev_err(&pl08x->adev->dev,
"%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n",
@ -917,9 +845,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
* need, but for slaves the physical signals may be muxed!
* Can the platform allow us to use this channel?
*/
if (plchan->slave &&
ch->signal < 0 &&
pl08x->pd->get_signal) {
if (plchan->slave && pl08x->pd->get_signal) {
ret = pl08x->pd->get_signal(plchan);
if (ret < 0) {
dev_dbg(&pl08x->adev->dev,
@ -1008,10 +934,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
* If slaves are relying on interrupts to signal completion this function
* must not be called with interrupts disabled.
*/
static enum dma_status
pl08x_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie,
struct dma_tx_state *txstate)
static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
dma_cookie_t last_used;
@ -1253,7 +1177,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
if (!num_llis) {
kfree(txd);
spin_lock_irqsave(&plchan->lock, flags);
pl08x_free_txd(pl08x, txd);
spin_unlock_irqrestore(&plchan->lock, flags);
return -EINVAL;
}
@ -1301,7 +1227,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
unsigned long flags)
{
struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
if (txd) {
dma_async_tx_descriptor_init(&txd->tx, &plchan->chan);
@ -1367,7 +1293,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_txd *txd;
int ret;
int ret, tmp;
/*
* Current implementation ASSUMES only one sg
@ -1401,12 +1327,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
txd->len = sgl->length;
if (direction == DMA_TO_DEVICE) {
txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->dst_cctl;
txd->src_addr = sgl->dma_address;
txd->dst_addr = plchan->dst_addr;
} else if (direction == DMA_FROM_DEVICE) {
txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
txd->cctl = plchan->src_cctl;
txd->src_addr = plchan->src_addr;
txd->dst_addr = sgl->dma_address;
@ -1416,6 +1340,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
return NULL;
}
if (plchan->cd->device_fc)
tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER :
PL080_FLOW_PER2MEM_PER;
else
tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER :
PL080_FLOW_PER2MEM;
txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT;
ret = pl08x_prep_channel_resources(plchan, txd);
if (ret)
return NULL;
@ -1489,9 +1422,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
{
struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
struct pl08x_dma_chan *plchan;
char *name = chan_id;
/* Reject channels for devices not bound to this driver */
if (chan->device->dev->driver != &pl08x_amba_driver.drv)
return false;
plchan = to_pl08x_chan(chan);
/* Check that the channel is not taken! */
if (!strcmp(plchan->name, name))
return true;
@ -1507,13 +1446,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
*/
static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
{
u32 val;
val = readl(pl08x->base + PL080_CONFIG);
val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
/* We implicitly clear bit 1 and that means little-endian mode */
val |= PL080_CONFIG_ENABLE;
writel(val, pl08x->base + PL080_CONFIG);
writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG);
}
static void pl08x_unmap_buffers(struct pl08x_txd *txd)
@ -1589,8 +1522,8 @@ static void pl08x_tasklet(unsigned long data)
*/
list_for_each_entry(waiting, &pl08x->memcpy.channels,
chan.device_node) {
if (waiting->state == PL08X_CHAN_WAITING &&
waiting->waiting != NULL) {
if (waiting->state == PL08X_CHAN_WAITING &&
waiting->waiting != NULL) {
int ret;
/* This should REALLY not fail now */
@ -1630,38 +1563,40 @@ static void pl08x_tasklet(unsigned long data)
static irqreturn_t pl08x_irq(int irq, void *dev)
{
struct pl08x_driver_data *pl08x = dev;
u32 mask = 0;
u32 val;
int i;
u32 mask = 0, err, tc, i;
val = readl(pl08x->base + PL080_ERR_STATUS);
if (val) {
/* An error interrupt (on one or more channels) */
dev_err(&pl08x->adev->dev,
"%s error interrupt, register value 0x%08x\n",
__func__, val);
/*
* Simply clear ALL PL08X error interrupts,
* regardless of channel and cause
* FIXME: should be 0x00000003 on PL081 really.
*/
writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
/* check & clear - ERR & TC interrupts */
err = readl(pl08x->base + PL080_ERR_STATUS);
if (err) {
dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n",
__func__, err);
writel(err, pl08x->base + PL080_ERR_CLEAR);
}
val = readl(pl08x->base + PL080_INT_STATUS);
tc = readl(pl08x->base + PL080_INT_STATUS);
if (tc)
writel(tc, pl08x->base + PL080_TC_CLEAR);
if (!err && !tc)
return IRQ_NONE;
for (i = 0; i < pl08x->vd->channels; i++) {
if ((1 << i) & val) {
if (((1 << i) & err) || ((1 << i) & tc)) {
/* Locate physical channel */
struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
struct pl08x_dma_chan *plchan = phychan->serving;
if (!plchan) {
dev_err(&pl08x->adev->dev,
"%s Error TC interrupt on unused channel: 0x%08x\n",
__func__, i);
continue;
}
/* Schedule tasklet on this channel */
tasklet_schedule(&plchan->tasklet);
mask |= (1 << i);
}
}
/* Clear only the terminal interrupts on channels we processed */
writel(mask, pl08x->base + PL080_TC_CLEAR);
return mask ? IRQ_HANDLED : IRQ_NONE;
}
@ -1685,9 +1620,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
* Make a local wrapper to hold required data
*/
static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
struct dma_device *dmadev,
unsigned int channels,
bool slave)
struct dma_device *dmadev, unsigned int channels, bool slave)
{
struct pl08x_dma_chan *chan;
int i;
@ -1700,7 +1633,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
* to cope with that situation.
*/
for (i = 0; i < channels; i++) {
chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
chan = kzalloc(sizeof(*chan), GFP_KERNEL);
if (!chan) {
dev_err(&pl08x->adev->dev,
"%s no memory for channel\n", __func__);
@ -1728,7 +1661,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
kfree(chan);
continue;
}
dev_info(&pl08x->adev->dev,
dev_dbg(&pl08x->adev->dev,
"initialize virtual channel \"%s\"\n",
chan->name);
@ -1837,9 +1770,9 @@ static const struct file_operations pl08x_debugfs_operations = {
static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
{
/* Expose a simple debugfs interface to view all clocks */
(void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
NULL, pl08x,
&pl08x_debugfs_operations);
(void) debugfs_create_file(dev_name(&pl08x->adev->dev),
S_IFREG | S_IRUGO, NULL, pl08x,
&pl08x_debugfs_operations);
}
#else
@ -1860,12 +1793,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
return ret;
/* Create the driver state holder */
pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL);
if (!pl08x) {
ret = -ENOMEM;
goto out_no_pl08x;
}
pm_runtime_set_active(&adev->dev);
pm_runtime_enable(&adev->dev);
/* Initialize memcpy engine */
dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
pl08x->memcpy.dev = &adev->dev;
@ -1939,7 +1875,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
}
/* Initialize physical channels */
pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)),
GFP_KERNEL);
if (!pl08x->phy_chans) {
dev_err(&adev->dev, "%s failed to allocate "
@ -1956,9 +1892,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&ch->lock);
ch->serving = NULL;
ch->signal = -1;
dev_info(&adev->dev,
"physical channel %d is %s\n", i,
pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
dev_dbg(&adev->dev, "physical channel %d is %s\n",
i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
}
/* Register as many memcpy channels as there are physical channels */
@ -1974,8 +1909,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
/* Register slave channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
pl08x->pd->num_slave_channels,
true);
pl08x->pd->num_slave_channels, true);
if (ret <= 0) {
dev_warn(&pl08x->adev->dev,
"%s failed to enumerate slave channels - %d\n",
@ -2005,6 +1939,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n",
amba_part(adev), amba_rev(adev),
(unsigned long long)adev->res.start, adev->irq[0]);
pm_runtime_put(&adev->dev);
return 0;
out_no_slave_reg:
@ -2023,6 +1959,9 @@ out_no_ioremap:
dma_pool_destroy(pl08x->pool);
out_no_lli_pool:
out_no_platdata:
pm_runtime_put(&adev->dev);
pm_runtime_disable(&adev->dev);
kfree(pl08x);
out_no_pl08x:
amba_release_regions(adev);

159
drivers/dma/at_hdmac.c
View File

@ -107,10 +107,11 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
{
struct at_desc *desc, *_desc;
struct at_desc *ret = NULL;
unsigned long flags;
unsigned int i = 0;
LIST_HEAD(tmp_list);
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
i++;
if (async_tx_test_ack(&desc->txd)) {
@ -121,7 +122,7 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
dev_dbg(chan2dev(&atchan->chan_common),
"desc %p not ACKed\n", desc);
}
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
dev_vdbg(chan2dev(&atchan->chan_common),
"scanned %u descriptors on freelist\n", i);
@ -129,9 +130,9 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
if (!ret) {
ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
if (ret) {
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
atchan->descs_allocated++;
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
} else {
dev_err(chan2dev(&atchan->chan_common),
"not enough descriptors available\n");
@ -150,8 +151,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
{
if (desc) {
struct at_desc *child;
unsigned long flags;
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&atchan->chan_common),
"moving child desc %p to freelist\n",
@ -160,7 +162,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
dev_vdbg(chan2dev(&atchan->chan_common),
"moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &atchan->free_list);
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
}
}
@ -299,7 +301,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
/* for cyclic transfers,
* no need to replay callback function while stopping */
if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) {
if (!atc_chan_is_cyclic(atchan)) {
dma_async_tx_callback callback = txd->callback;
void *param = txd->callback_param;
@ -471,16 +473,17 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan)
static void atc_tasklet(unsigned long data)
{
struct at_dma_chan *atchan = (struct at_dma_chan *)data;
unsigned long flags;
spin_lock(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status))
atc_handle_error(atchan);
else if (test_bit(ATC_IS_CYCLIC, &atchan->status))
else if (atc_chan_is_cyclic(atchan))
atc_handle_cyclic(atchan);
else
atc_advance_work(atchan);
spin_unlock(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
}
static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
@ -539,8 +542,9 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
struct at_desc *desc = txd_to_at_desc(tx);
struct at_dma_chan *atchan = to_at_dma_chan(tx->chan);
dma_cookie_t cookie;
unsigned long flags;
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
cookie = atc_assign_cookie(atchan, desc);
if (list_empty(&atchan->active_list)) {
@ -554,7 +558,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
list_add_tail(&desc->desc_node, &atchan->queue);
}
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
return cookie;
}
@ -927,28 +931,29 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
struct at_dma_chan *atchan = to_at_dma_chan(chan);
struct at_dma *atdma = to_at_dma(chan->device);
int chan_id = atchan->chan_common.chan_id;
unsigned long flags;
LIST_HEAD(list);
dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd);
if (cmd == DMA_PAUSE) {
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id));
set_bit(ATC_IS_PAUSED, &atchan->status);
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
} else if (cmd == DMA_RESUME) {
if (!test_bit(ATC_IS_PAUSED, &atchan->status))
if (!atc_chan_is_paused(atchan))
return 0;
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id));
clear_bit(ATC_IS_PAUSED, &atchan->status);
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
} else if (cmd == DMA_TERMINATE_ALL) {
struct at_desc *desc, *_desc;
/*
@ -957,7 +962,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
* channel. We still have to poll the channel enable bit due
* to AHB/HSB limitations.
*/
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
/* disabling channel: must also remove suspend state */
dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask);
@ -978,7 +983,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
/* if channel dedicated to cyclic operations, free it */
clear_bit(ATC_IS_CYCLIC, &atchan->status);
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
} else {
return -ENXIO;
}
@ -1004,9 +1009,10 @@ atc_tx_status(struct dma_chan *chan,
struct at_dma_chan *atchan = to_at_dma_chan(chan);
dma_cookie_t last_used;
dma_cookie_t last_complete;
unsigned long flags;
enum dma_status ret;
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
last_complete = atchan->completed_cookie;
last_used = chan->cookie;
@ -1021,7 +1027,7 @@ atc_tx_status(struct dma_chan *chan,
ret = dma_async_is_complete(cookie, last_complete, last_used);
}
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
if (ret != DMA_SUCCESS)
dma_set_tx_state(txstate, last_complete, last_used,
@ -1029,7 +1035,7 @@ atc_tx_status(struct dma_chan *chan,
else
dma_set_tx_state(txstate, last_complete, last_used, 0);
if (test_bit(ATC_IS_PAUSED, &atchan->status))
if (atc_chan_is_paused(atchan))
ret = DMA_PAUSED;
dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n",
@ -1046,18 +1052,19 @@ atc_tx_status(struct dma_chan *chan,
static void atc_issue_pending(struct dma_chan *chan)
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
unsigned long flags;
dev_vdbg(chan2dev(chan), "issue_pending\n");
/* Not needed for cyclic transfers */
if (test_bit(ATC_IS_CYCLIC, &atchan->status))
if (atc_chan_is_cyclic(atchan))
return;
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
if (!atc_chan_is_enabled(atchan)) {
atc_advance_work(atchan);
}
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
}
/**
@ -1073,6 +1080,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
struct at_dma *atdma = to_at_dma(chan->device);
struct at_desc *desc;
struct at_dma_slave *atslave;
unsigned long flags;
int i;
u32 cfg;
LIST_HEAD(tmp_list);
@ -1116,11 +1124,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan)
list_add_tail(&desc->desc_node, &tmp_list);
}
spin_lock_bh(&atchan->lock);
spin_lock_irqsave(&atchan->lock, flags);
atchan->descs_allocated = i;
list_splice(&tmp_list, &atchan->free_list);
atchan->completed_cookie = chan->cookie = 1;
spin_unlock_bh(&atchan->lock);
spin_unlock_irqrestore(&atchan->lock, flags);
/* channel parameters */
channel_writel(atchan, CFG, cfg);
@ -1293,15 +1301,13 @@ static int __init at_dma_probe(struct platform_device *pdev)
if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask))
if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
/* controller can do slave DMA: can trigger cyclic transfers */
dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ||
dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
atdma->dma_common.device_control = atc_control;
}
dma_writel(atdma, EN, AT_DMA_ENABLE);
@ -1377,27 +1383,112 @@ static void at_dma_shutdown(struct platform_device *pdev)
clk_disable(atdma->clk);
}
static int at_dma_prepare(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct at_dma *atdma = platform_get_drvdata(pdev);
struct dma_chan *chan, *_chan;
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
device_node) {
struct at_dma_chan *atchan = to_at_dma_chan(chan);
/* wait for transaction completion (except in cyclic case) */
if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan))
return -EAGAIN;
}
return 0;
}
static void atc_suspend_cyclic(struct at_dma_chan *atchan)
{
struct dma_chan *chan = &atchan->chan_common;
/* Channel should be paused by user
* do it anyway even if it is not done already */
if (!atc_chan_is_paused(atchan)) {
dev_warn(chan2dev(chan),
"cyclic channel not paused, should be done by channel user\n");
atc_control(chan, DMA_PAUSE, 0);
}
/* now preserve additional data for cyclic operations */
/* next descriptor address in the cyclic list */
atchan->save_dscr = channel_readl(atchan, DSCR);
vdbg_dump_regs(atchan);
}
static int at_dma_suspend_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct at_dma *atdma = platform_get_drvdata(pdev);
struct dma_chan *chan, *_chan;
at_dma_off(platform_get_drvdata(pdev));
/* preserve data */
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
device_node) {
struct at_dma_chan *atchan = to_at_dma_chan(chan);
if (atc_chan_is_cyclic(atchan))
atc_suspend_cyclic(atchan);
atchan->save_cfg = channel_readl(atchan, CFG);
}
atdma->save_imr = dma_readl(atdma, EBCIMR);
/* disable DMA controller */
at_dma_off(atdma);
clk_disable(atdma->clk);
return 0;
}
static void atc_resume_cyclic(struct at_dma_chan *atchan)
{
struct at_dma *atdma = to_at_dma(atchan->chan_common.device);
/* restore channel status for cyclic descriptors list:
* next descriptor in the cyclic list at the time of suspend */
channel_writel(atchan, SADDR, 0);
channel_writel(atchan, DADDR, 0);
channel_writel(atchan, CTRLA, 0);
channel_writel(atchan, CTRLB, 0);
channel_writel(atchan, DSCR, atchan->save_dscr);
dma_writel(atdma, CHER, atchan->mask);
/* channel pause status should be removed by channel user
* We cannot take the initiative to do it here */
vdbg_dump_regs(atchan);
}
static int at_dma_resume_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct at_dma *atdma = platform_get_drvdata(pdev);
struct dma_chan *chan, *_chan;
/* bring back DMA controller */
clk_enable(atdma->clk);
dma_writel(atdma, EN, AT_DMA_ENABLE);
/* clear any pending interrupt */
while (dma_readl(atdma, EBCISR))
cpu_relax();
/* restore saved data */
dma_writel(atdma, EBCIER, atdma->save_imr);
list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
device_node) {
struct at_dma_chan *atchan = to_at_dma_chan(chan);
channel_writel(atchan, CFG, atchan->save_cfg);
if (atc_chan_is_cyclic(atchan))
atc_resume_cyclic(atchan);
}
return 0;
}
static const struct dev_pm_ops at_dma_dev_pm_ops = {
.prepare = at_dma_prepare,
.suspend_noirq = at_dma_suspend_noirq,
.resume_noirq = at_dma_resume_noirq,
};

24
drivers/dma/at_hdmac_regs.h
View File

@ -204,6 +204,9 @@ enum atc_status {
* @status: transmit status information from irq/prep* functions
* to tasklet (use atomic operations)
* @tasklet: bottom half to finish transaction work
* @save_cfg: configuration register that is saved on suspend/resume cycle
* @save_dscr: for cyclic operations, preserve next descriptor address in
* the cyclic list on suspend/resume cycle
* @lock: serializes enqueue/dequeue operations to descriptors lists
* @completed_cookie: identifier for the most recently completed operation
* @active_list: list of descriptors dmaengine is being running on
@ -218,6 +221,8 @@ struct at_dma_chan {
u8 mask;
unsigned long status;
struct tasklet_struct tasklet;
u32 save_cfg;
u32 save_dscr;
spinlock_t lock;
@ -248,6 +253,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
* @chan_common: common dmaengine dma_device object members
* @ch_regs: memory mapped register base
* @clk: dma controller clock
* @save_imr: interrupt mask register that is saved on suspend/resume cycle
* @all_chan_mask: all channels availlable in a mask
* @dma_desc_pool: base of DMA descriptor region (DMA address)
* @chan: channels table to store at_dma_chan structures
@ -256,6 +262,7 @@ struct at_dma {
struct dma_device dma_common;
void __iomem *regs;
struct clk *clk;
u32 save_imr;
u8 all_chan_mask;
@ -355,6 +362,23 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
return !!(dma_readl(atdma, CHSR) & atchan->mask);
}
/**
* atc_chan_is_paused - test channel pause/resume status
* @atchan: channel we want to test status
*/
static inline int atc_chan_is_paused(struct at_dma_chan *atchan)
{
return test_bit(ATC_IS_PAUSED, &atchan->status);
}
/**
* atc_chan_is_cyclic - test if given channel has cyclic property set
* @atchan: channel we want to test status
*/
static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan)
{
return test_bit(ATC_IS_CYCLIC, &atchan->status);
}
/**
* set_desc_eol - set end-of-link to descriptor so it will end transfer

23
drivers/dma/dmatest.c
View File

@ -10,6 +10,7 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/freezer.h>
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/module.h>
@ -251,6 +252,7 @@ static int dmatest_func(void *data)
int i;
thread_name = current->comm;
set_freezable_with_signal();
ret = -ENOMEM;
@ -305,7 +307,8 @@ static int dmatest_func(void *data)
dma_addr_t dma_srcs[src_cnt];
dma_addr_t dma_dsts[dst_cnt];
struct completion cmp;
unsigned long tmo = msecs_to_jiffies(timeout);
unsigned long start, tmo, end = 0 /* compiler... */;
bool reload = true;
u8 align = 0;
total_tests++;
@ -404,7 +407,17 @@ static int dmatest_func(void *data)
}
dma_async_issue_pending(chan);
tmo = wait_for_completion_timeout(&cmp, tmo);
do {
start = jiffies;
if (reload)
end = start + msecs_to_jiffies(timeout);
else if (end <= start)
end = start + 1;
tmo = wait_for_completion_interruptible_timeout(&cmp,
end - start);
reload = try_to_freeze();
} while (tmo == -ERESTARTSYS);
status = dma_async_is_tx_complete(chan, cookie, NULL, NULL);
if (tmo == 0) {
@ -477,6 +490,8 @@ err_srcs:
pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
thread_name, total_tests, failed_tests, ret);
/* terminate all transfers on specified channels */
chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
if (iterations > 0)
while (!kthread_should_stop()) {
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit);
@ -499,6 +514,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc)
list_del(&thread->node);
kfree(thread);
}
/* terminate all transfers on specified channels */
dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0);
kfree(dtc);
}

47
drivers/dma/imx-sdma.c
View File

@ -318,6 +318,7 @@ struct sdma_engine {
dma_addr_t context_phys;
struct dma_device dma_device;
struct clk *clk;
struct mutex channel_0_lock;
struct sdma_script_start_addrs *script_addrs;
};
@ -415,11 +416,15 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
dma_addr_t buf_phys;
int ret;
mutex_lock(&sdma->channel_0_lock);
buf_virt = dma_alloc_coherent(NULL,
size,
&buf_phys, GFP_KERNEL);
if (!buf_virt)
return -ENOMEM;
if (!buf_virt) {
ret = -ENOMEM;
goto err_out;
}
bd0->mode.command = C0_SETPM;
bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD;
@ -433,6 +438,9 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size,
dma_free_coherent(NULL, size, buf_virt, buf_phys);
err_out:
mutex_unlock(&sdma->channel_0_lock);
return ret;
}
@ -656,6 +664,8 @@ static int sdma_load_context(struct sdma_channel *sdmac)
dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0);
dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1);
mutex_lock(&sdma->channel_0_lock);
memset(context, 0, sizeof(*context));
context->channel_state.pc = load_address;
@ -676,6 +686,8 @@ static int sdma_load_context(struct sdma_channel *sdmac)
ret = sdma_run_channel(&sdma->channel[0]);
mutex_unlock(&sdma->channel_0_lock);
return ret;
}
@ -1131,18 +1143,17 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
saddr_arr[i] = addr_arr[i];
}
static int __init sdma_get_firmware(struct sdma_engine *sdma,
const char *fw_name)
static void sdma_load_firmware(const struct firmware *fw, void *context)
{
const struct firmware *fw;
struct sdma_engine *sdma = context;
const struct sdma_firmware_header *header;
int ret;
const struct sdma_script_start_addrs *addr;
unsigned short *ram_code;
ret = request_firmware(&fw, fw_name, sdma->dev);
if (ret)
return ret;
if (!fw) {
dev_err(sdma->dev, "firmware not found\n");
return;
}
if (fw->size < sizeof(*header))
goto err_firmware;
@ -1172,6 +1183,16 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma,
err_firmware:
release_firmware(fw);
}
static int __init sdma_get_firmware(struct sdma_engine *sdma,
const char *fw_name)
{
int ret;
ret = request_firmware_nowait(THIS_MODULE,
FW_ACTION_HOTPLUG, fw_name, sdma->dev,
GFP_KERNEL, sdma, sdma_load_firmware);
return ret;
}
@ -1269,11 +1290,14 @@ static int __init sdma_probe(struct platform_device *pdev)
struct sdma_platform_data *pdata = pdev->dev.platform_data;
int i;
struct sdma_engine *sdma;
s32 *saddr_arr;
sdma = kzalloc(sizeof(*sdma), GFP_KERNEL);
if (!sdma)
return -ENOMEM;
mutex_init(&sdma->channel_0_lock);
sdma->dev = &pdev->dev;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@ -1310,6 +1334,11 @@ static int __init sdma_probe(struct platform_device *pdev)
goto err_alloc;
}
/* initially no scripts available */
saddr_arr = (s32 *)sdma->script_addrs;
for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
saddr_arr[i] = -EINVAL;
if (of_id)
pdev->id_entry = of_id->data;
sdma->devtype = pdev->id_entry->driver_data;

45
drivers/dma/mxs-dma.c
View File

@ -130,6 +130,23 @@ struct mxs_dma_engine {
struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS];
};
static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable)
{
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int chan_id = mxs_chan->chan.chan_id;
int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR;
/* enable apbh channel clock */
if (dma_is_apbh()) {
if (apbh_is_old())
writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
else
writel(1 << chan_id,
mxs_dma->base + HW_APBHX_CTRL0 + set_clr);
}
}
static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan)
{
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
@ -148,38 +165,21 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan)
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int chan_id = mxs_chan->chan.chan_id;
/* clkgate needs to be enabled before writing other registers */
mxs_dma_clkgate(mxs_chan, 1);
/* set cmd_addr up */
writel(mxs_chan->ccw_phys,
mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
/* enable apbh channel clock */
if (dma_is_apbh()) {
if (apbh_is_old())
writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
else
writel(1 << chan_id,
mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR);
}
/* write 1 to SEMA to kick off the channel */
writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
}
static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
{
struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
int chan_id = mxs_chan->chan.chan_id;
/* disable apbh channel clock */
if (dma_is_apbh()) {
if (apbh_is_old())
writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL),
mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
else
writel(1 << chan_id,
mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR);
}
mxs_dma_clkgate(mxs_chan, 0);
mxs_chan->status = DMA_SUCCESS;
}
@ -338,7 +338,10 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan)
if (ret)
goto err_clk;
/* clkgate needs to be enabled for reset to finish */
mxs_dma_clkgate(mxs_chan, 1);
mxs_dma_reset_chan(mxs_chan);
mxs_dma_clkgate(mxs_chan, 0);
dma_async_tx_descriptor_init(&mxs_chan->desc, chan);
mxs_chan->desc.tx_submit = mxs_dma_tx_submit;

233
drivers/dma/pl330.c
View File

@ -17,6 +17,8 @@
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
#define NR_DEFAULT_DESC 16
@ -68,6 +70,14 @@ struct dma_pl330_chan {
* NULL if the channel is available to be acquired.
*/
void *pl330_chid;
/* For D-to-M and M-to-D channels */
int burst_sz; /* the peripheral fifo width */
int burst_len; /* the number of burst */
dma_addr_t fifo_addr;
/* for cyclic capability */
bool cyclic;
};
struct dma_pl330_dmac {
@ -83,6 +93,8 @@ struct dma_pl330_dmac {
/* Peripheral channels connected to this DMAC */
struct dma_pl330_chan *peripherals; /* keep at end */
struct clk *clk;
};
struct dma_pl330_desc {
@ -152,6 +164,31 @@ static inline void free_desc_list(struct list_head *list)
spin_unlock_irqrestore(&pdmac->pool_lock, flags);
}
static inline void handle_cyclic_desc_list(struct list_head *list)
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch;
unsigned long flags;
if (list_empty(list))
return;
list_for_each_entry(desc, list, node) {
dma_async_tx_callback callback;
/* Change status to reload it */
desc->status = PREP;
pch = desc->pchan;
callback = desc->txd.callback;
if (callback)
callback(desc->txd.callback_param);
}
spin_lock_irqsave(&pch->lock, flags);
list_splice_tail_init(list, &pch->work_list);
spin_unlock_irqrestore(&pch->lock, flags);
}
static inline void fill_queue(struct dma_pl330_chan *pch)
{
struct dma_pl330_desc *desc;
@ -205,7 +242,10 @@ static void pl330_tasklet(unsigned long data)
spin_unlock_irqrestore(&pch->lock, flags);
free_desc_list(&list);
if (pch->cyclic)
handle_cyclic_desc_list(&list);
else
free_desc_list(&list);
}
static void dma_pl330_rqcb(void *token, enum pl330_op_err err)
@ -236,6 +276,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
spin_lock_irqsave(&pch->lock, flags);
pch->completed = chan->cookie = 1;
pch->cyclic = false;
pch->pl330_chid = pl330_request_channel(&pdmac->pif);
if (!pch->pl330_chid) {
@ -253,25 +294,52 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
{
struct dma_pl330_chan *pch = to_pchan(chan);
struct dma_pl330_desc *desc;
struct dma_pl330_desc *desc, *_dt;
unsigned long flags;
struct dma_pl330_dmac *pdmac = pch->dmac;
struct dma_slave_config *slave_config;
LIST_HEAD(list);
/* Only supports DMA_TERMINATE_ALL */
if (cmd != DMA_TERMINATE_ALL)
switch (cmd) {
case DMA_TERMINATE_ALL:
spin_lock_irqsave(&pch->lock, flags);
/* FLUSH the PL330 Channel thread */
pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
/* Mark all desc done */
list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
desc->status = DONE;
pch->completed = desc->txd.cookie;
list_move_tail(&desc->node, &list);
}
list_splice_tail_init(&list, &pdmac->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
break;
case DMA_SLAVE_CONFIG:
slave_config = (struct dma_slave_config *)arg;
if (slave_config->direction == DMA_TO_DEVICE) {
if (slave_config->dst_addr)
pch->fifo_addr = slave_config->dst_addr;
if (slave_config->dst_addr_width)
pch->burst_sz = __ffs(slave_config->dst_addr_width);
if (slave_config->dst_maxburst)
pch->burst_len = slave_config->dst_maxburst;
} else if (slave_config->direction == DMA_FROM_DEVICE) {
if (slave_config->src_addr)
pch->fifo_addr = slave_config->src_addr;
if (slave_config->src_addr_width)
pch->burst_sz = __ffs(slave_config->src_addr_width);
if (slave_config->src_maxburst)
pch->burst_len = slave_config->src_maxburst;
}
break;
default:
dev_err(pch->dmac->pif.dev, "Not supported command.\n");
return -ENXIO;
spin_lock_irqsave(&pch->lock, flags);
/* FLUSH the PL330 Channel thread */
pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
/* Mark all desc done */
list_for_each_entry(desc, &pch->work_list, node)
desc->status = DONE;
spin_unlock_irqrestore(&pch->lock, flags);
pl330_tasklet((unsigned long) pch);
}
return 0;
}
@ -288,6 +356,9 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
pl330_release_channel(pch->pl330_chid);
pch->pl330_chid = NULL;
if (pch->cyclic)
list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
}
@ -453,7 +524,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
if (peri) {
desc->req.rqtype = peri->rqtype;
desc->req.peri = peri->peri_id;
desc->req.peri = pch->chan.chan_id;
} else {
desc->req.rqtype = MEMTOMEM;
desc->req.peri = 0;
@ -524,6 +595,51 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
return burst_len;
}
static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
size_t period_len, enum dma_data_direction direction)
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch = to_pchan(chan);
dma_addr_t dst;
dma_addr_t src;
desc = pl330_get_desc(pch);
if (!desc) {
dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n",
__func__, __LINE__);
return NULL;
}
switch (direction) {
case DMA_TO_DEVICE:
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
src = dma_addr;
dst = pch->fifo_addr;
break;
case DMA_FROM_DEVICE:
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
src = pch->fifo_addr;
dst = dma_addr;
break;
default:
dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n",
__func__, __LINE__);
return NULL;
}
desc->rqcfg.brst_size = pch->burst_sz;
desc->rqcfg.brst_len = 1;
pch->cyclic = true;
fill_px(&desc->px, dst, src, period_len);
return &desc->txd;
}
static struct dma_async_tx_descriptor *
pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
dma_addr_t src, size_t len, unsigned long flags)
@ -579,7 +695,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
struct dma_pl330_peri *peri = chan->private;
struct scatterlist *sg;
unsigned long flags;
int i, burst_size;
int i;
dma_addr_t addr;
if (unlikely(!pch || !sgl || !sg_len || !peri))
@ -595,8 +711,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
return NULL;
}
addr = peri->fifo_addr;
burst_size = peri->burst_sz;
addr = pch->fifo_addr;
first = NULL;
@ -644,7 +759,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
sg_dma_address(sg), addr, sg_dma_len(sg));
}
desc->rqcfg.brst_size = burst_size;
desc->rqcfg.brst_size = pch->burst_sz;
desc->rqcfg.brst_len = 1;
}
@ -696,6 +811,30 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
goto probe_err1;
}
pdmac->clk = clk_get(&adev->dev, "dma");
if (IS_ERR(pdmac->clk)) {
dev_err(&adev->dev, "Cannot get operation clock.\n");
ret = -EINVAL;
goto probe_err1;
}
amba_set_drvdata(adev, pdmac);
#ifdef CONFIG_PM_RUNTIME
/* to use the runtime PM helper functions */
pm_runtime_enable(&adev->dev);
/* enable the power domain */
if (pm_runtime_get_sync(&adev->dev)) {
dev_err(&adev->dev, "failed to get runtime pm\n");
ret = -ENODEV;
goto probe_err1;
}
#else
/* enable dma clk */
clk_enable(pdmac->clk);
#endif
irq = adev->irq[0];
ret = request_irq(irq, pl330_irq_handler, 0,
dev_name(&adev->dev), pi);
@ -732,6 +871,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
case MEMTODEV:
case DEVTOMEM:
dma_cap_set(DMA_SLAVE, pd->cap_mask);
dma_cap_set(DMA_CYCLIC, pd->cap_mask);
break;
default:
dev_err(&adev->dev, "DEVTODEV Not Supported\n");
@ -760,6 +900,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
pd->device_free_chan_resources = pl330_free_chan_resources;
pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
pd->device_tx_status = pl330_tx_status;
pd->device_prep_slave_sg = pl330_prep_slave_sg;
pd->device_control = pl330_control;
@ -771,8 +912,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
goto probe_err4;
}
amba_set_drvdata(adev, pdmac);
dev_info(&adev->dev,
"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
dev_info(&adev->dev,
@ -833,6 +972,13 @@ static int __devexit pl330_remove(struct amba_device *adev)
res = &adev->res;
release_mem_region(res->start, resource_size(res));
#ifdef CONFIG_PM_RUNTIME
pm_runtime_put(&adev->dev);
pm_runtime_disable(&adev->dev);
#else
clk_disable(pdmac->clk);
#endif
kfree(pdmac);
return 0;
@ -846,10 +992,49 @@ static struct amba_id pl330_ids[] = {
{ 0, 0 },
};
#ifdef CONFIG_PM_RUNTIME
static int pl330_runtime_suspend(struct device *dev)
{
struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
if (!pdmac) {
dev_err(dev, "failed to get dmac\n");
return -ENODEV;
}
clk_disable(pdmac->clk);
return 0;
}
static int pl330_runtime_resume(struct device *dev)
{
struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev);
if (!pdmac) {
dev_err(dev, "failed to get dmac\n");
return -ENODEV;
}
clk_enable(pdmac->clk);
return 0;
}
#else
#define pl330_runtime_suspend NULL
#define pl330_runtime_resume NULL
#endif /* CONFIG_PM_RUNTIME */
static const struct dev_pm_ops pl330_pm_ops = {
.runtime_suspend = pl330_runtime_suspend,
.runtime_resume = pl330_runtime_resume,
};
static struct amba_driver pl330_driver = {
.drv = {
.owner = THIS_MODULE,
.name = "dma-pl330",
.pm = &pl330_pm_ops,
},
.id_table = pl330_ids,
.probe = pl330_probe,

6
drivers/mmc/host/s3cmci.c
View File

@ -913,9 +913,9 @@ request_done:
}
static void s3cmci_dma_setup(struct s3cmci_host *host,
enum s3c2410_dmasrc source)
enum dma_data_direction source)
{
static enum s3c2410_dmasrc last_source = -1;
static enum dma_data_direction last_source = -1;
static int setup_ok;
if (last_source == source)
@ -1087,7 +1087,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW);
s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,

175
drivers/spi/spi-s3c64xx.c
View File

@ -131,6 +131,12 @@
#define RXBUSY (1<<2)
#define TXBUSY (1<<3)
struct s3c64xx_spi_dma_data {
unsigned ch;
enum dma_data_direction direction;
enum dma_ch dmach;
};
/**
* struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver.
* @clk: Pointer to the spi clock.
@ -164,13 +170,14 @@ struct s3c64xx_spi_driver_data {
struct work_struct work;
struct list_head queue;
spinlock_t lock;
enum dma_ch rx_dmach;
enum dma_ch tx_dmach;
unsigned long sfr_start;
struct completion xfer_completion;
unsigned state;
unsigned cur_mode, cur_bpw;
unsigned cur_speed;
struct s3c64xx_spi_dma_data rx_dma;
struct s3c64xx_spi_dma_data tx_dma;
struct samsung_dma_ops *ops;
};
static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
@ -226,6 +233,78 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
writel(val, regs + S3C64XX_SPI_CH_CFG);
}
static void s3c64xx_spi_dmacb(void *data)
{
struct s3c64xx_spi_driver_data *sdd;
struct s3c64xx_spi_dma_data *dma = data;
unsigned long flags;
if (dma->direction == DMA_FROM_DEVICE)
sdd = container_of(data,
struct s3c64xx_spi_driver_data, rx_dma);
else
sdd = container_of(data,
struct s3c64xx_spi_driver_data, tx_dma);
spin_lock_irqsave(&sdd->lock, flags);
if (dma->direction == DMA_FROM_DEVICE) {
sdd->state &= ~RXBUSY;
if (!(sdd->state & TXBUSY))
complete(&sdd->xfer_completion);
} else {
sdd->state &= ~TXBUSY;
if (!(sdd->state & RXBUSY))
complete(&sdd->xfer_completion);
}
spin_unlock_irqrestore(&sdd->lock, flags);
}
static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
unsigned len, dma_addr_t buf)
{
struct s3c64xx_spi_driver_data *sdd;
struct samsung_dma_prep_info info;
if (dma->direction == DMA_FROM_DEVICE)
sdd = container_of((void *)dma,
struct s3c64xx_spi_driver_data, rx_dma);
else
sdd = container_of((void *)dma,
struct s3c64xx_spi_driver_data, tx_dma);
info.cap = DMA_SLAVE;
info.len = len;
info.fp = s3c64xx_spi_dmacb;
info.fp_param = dma;
info.direction = dma->direction;
info.buf = buf;
sdd->ops->prepare(dma->ch, &info);
sdd->ops->trigger(dma->ch);
}
static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
{
struct samsung_dma_info info;
sdd->ops = samsung_dma_get_ops();
info.cap = DMA_SLAVE;
info.client = &s3c64xx_spi_dma_client;
info.width = sdd->cur_bpw / 8;
info.direction = sdd->rx_dma.direction;
info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info);
info.direction = sdd->tx_dma.direction;
info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info);
return 1;
}
static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
@ -258,10 +337,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
chcfg |= S3C64XX_SPI_CH_TXCH_ON;
if (dma_mode) {
modecfg |= S3C64XX_SPI_MODE_TXDMA_ON;
s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8);
s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd,
xfer->tx_dma, xfer->len);
s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START);
prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma);
} else {
switch (sdd->cur_bpw) {
case 32:
@ -293,10 +369,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff)
| S3C64XX_SPI_PACKET_CNT_EN,
regs + S3C64XX_SPI_PACKET_CNT);
s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8);
s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd,
xfer->rx_dma, xfer->len);
s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START);
prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma);
}
}
@ -482,46 +555,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
}
}
static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
int size, enum s3c2410_dma_buffresult res)
{
struct s3c64xx_spi_driver_data *sdd = buf_id;
unsigned long flags;
spin_lock_irqsave(&sdd->lock, flags);
if (res == S3C2410_RES_OK)
sdd->state &= ~RXBUSY;
else
dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size);
/* If the other done */
if (!(sdd->state & TXBUSY))
complete(&sdd->xfer_completion);
spin_unlock_irqrestore(&sdd->lock, flags);
}
static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
int size, enum s3c2410_dma_buffresult res)
{
struct s3c64xx_spi_driver_data *sdd = buf_id;
unsigned long flags;
spin_lock_irqsave(&sdd->lock, flags);
if (res == S3C2410_RES_OK)
sdd->state &= ~TXBUSY;
else
dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size);
/* If the other done */
if (!(sdd->state & RXBUSY))
complete(&sdd->xfer_completion);
spin_unlock_irqrestore(&sdd->lock, flags);
}
#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32)
static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
@ -696,12 +729,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd,
if (use_dma) {
if (xfer->tx_buf != NULL
&& (sdd->state & TXBUSY))
s3c2410_dma_ctrl(sdd->tx_dmach,
S3C2410_DMAOP_FLUSH);
sdd->ops->stop(sdd->tx_dma.ch);
if (xfer->rx_buf != NULL
&& (sdd->state & RXBUSY))
s3c2410_dma_ctrl(sdd->rx_dmach,
S3C2410_DMAOP_FLUSH);
sdd->ops->stop(sdd->rx_dma.ch);
}
goto out;
@ -739,30 +770,6 @@ out:
msg->complete(msg->context);
}
static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
{
if (s3c2410_dma_request(sdd->rx_dmach,
&s3c64xx_spi_dma_client, NULL) < 0) {
dev_err(&sdd->pdev->dev, "cannot get RxDMA\n");
return 0;
}
s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb);
s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW,
sdd->sfr_start + S3C64XX_SPI_RX_DATA);
if (s3c2410_dma_request(sdd->tx_dmach,
&s3c64xx_spi_dma_client, NULL) < 0) {
dev_err(&sdd->pdev->dev, "cannot get TxDMA\n");
s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
return 0;
}
s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb);
s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM,
sdd->sfr_start + S3C64XX_SPI_TX_DATA);
return 1;
}
static void s3c64xx_spi_work(struct work_struct *work)
{
struct s3c64xx_spi_driver_data *sdd = container_of(work,
@ -799,8 +806,8 @@ static void s3c64xx_spi_work(struct work_struct *work)
spin_unlock_irqrestore(&sdd->lock, flags);
/* Free DMA channels */
s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client);
s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client);
sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
}
static int s3c64xx_spi_transfer(struct spi_device *spi,
@ -1017,8 +1024,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
sdd->cntrlr_info = sci;
sdd->pdev = pdev;
sdd->sfr_start = mem_res->start;
sdd->tx_dmach = dmatx_res->start;
sdd->rx_dmach = dmarx_res->start;
sdd->tx_dma.dmach = dmatx_res->start;
sdd->tx_dma.direction = DMA_TO_DEVICE;
sdd->rx_dma.dmach = dmarx_res->start;
sdd->rx_dma.direction = DMA_FROM_DEVICE;
sdd->cur_bpw = 8;
@ -1106,7 +1115,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
pdev->id, master->num_chipselect);
dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n",
mem_res->end, mem_res->start,
sdd->rx_dmach, sdd->tx_dmach);
sdd->rx_dma.dmach, sdd->tx_dma.dmach);
return 0;

14
include/linux/amba/pl08x.h
View File

@ -47,6 +47,9 @@ enum {
* @muxval: a number usually used to poke into some mux regiser to
* mux in the signal to this channel
* @cctl_opt: default options for the channel control register
* @device_fc: Flow Controller Settings for ccfg register. Only valid for slave
* channels. Fill with 'true' if peripheral should be flow controller. Direction
* will be selected at Runtime.
* @addr: source/target address in physical memory for this DMA channel,
* can be the address of a FIFO register for burst requests for example.
* This can be left undefined if the PrimeCell API is used for configuring
@ -65,6 +68,7 @@ struct pl08x_channel_data {
int max_signal;
u32 muxval;
u32 cctl;
bool device_fc;
dma_addr_t addr;
bool circular_buffer;
bool single;
@ -77,13 +81,11 @@ struct pl08x_channel_data {
* @addr: current address
* @maxwidth: the maximum width of a transfer on this bus
* @buswidth: the width of this bus in bytes: 1, 2 or 4
* @fill_bytes: bytes required to fill to the next bus memory boundary
*/
struct pl08x_bus_data {
dma_addr_t addr;
u8 maxwidth;
u8 buswidth;
size_t fill_bytes;
};
/**
@ -105,8 +107,16 @@ struct pl08x_phy_chan {
/**
* struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
* @tx: async tx descriptor
* @node: node for txd list for channels
* @src_addr: src address of txd
* @dst_addr: dst address of txd
* @len: transfer len in bytes
* @direction: direction of transfer
* @llis_bus: DMA memory address (physical) start for the LLIs
* @llis_va: virtual memory address start for the LLIs
* @cctl: control reg values for current txd
* @ccfg: config reg values for current txd
*/
struct pl08x_txd {
struct dma_async_tx_descriptor tx;

6
include/linux/amba/pl330.h
View File

@ -19,12 +19,8 @@ struct dma_pl330_peri {
* Peri_Req i/f of the DMAC that is
* peripheral could be reached from.
*/
u8 peri_id; /* {0, 31} */
u8 peri_id; /* specific dma id */
enum pl330_reqtype rqtype;
/* For M->D and D->M Channels */
int burst_sz; /* in power of 2 */
dma_addr_t fifo_addr;
};
struct dma_pl330_platdata {

13
include/linux/dmaengine.h
View File

@ -24,8 +24,7 @@
#include <linux/device.h>
#include <linux/uio.h>
#include <linux/dma-direction.h>
struct scatterlist;
#include <linux/scatterlist.h>
/**
* typedef dma_cookie_t - an opaque DMA cookie
@ -519,6 +518,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan,
(unsigned long)config);
}
static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single(
struct dma_chan *chan, void *buf, size_t len,
enum dma_data_direction dir, unsigned long flags)
{
struct scatterlist sg;
sg_init_one(&sg, buf, len);
return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags);
}
static inline int dmaengine_terminate_all(struct dma_chan *chan)
{
return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0);

10
sound/soc/samsung/ac97.c
View File

@ -271,7 +271,10 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
if (!dma_data->ops)
dma_data->ops = samsung_dma_get_ops();
dma_data->ops->started(dma_data->channel);
return 0;
}
@ -317,7 +320,10 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream,
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
if (!dma_data->ops)
dma_data->ops = samsung_dma_get_ops();
dma_data->ops->started(dma_data->channel);
return 0;
}

144
sound/soc/samsung/dma.c
View File

@ -54,7 +54,6 @@ struct runtime_data {
spinlock_t lock;
int state;
unsigned int dma_loaded;
unsigned int dma_limit;
unsigned int dma_period;
dma_addr_t dma_start;
dma_addr_t dma_pos;
@ -62,77 +61,79 @@ struct runtime_data {
struct s3c_dma_params *params;
};
static void audio_buffdone(void *data);
/* dma_enqueue
*
* place a dma buffer onto the queue for the dma system
* to handle.
*/
*/
static void dma_enqueue(struct snd_pcm_substream *substream)
{
struct runtime_data *prtd = substream->runtime->private_data;
dma_addr_t pos = prtd->dma_pos;
unsigned int limit;
int ret;
struct samsung_dma_prep_info dma_info;
pr_debug("Entered %s\n", __func__);
if (s3c_dma_has_circular())
limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
else
limit = prtd->dma_limit;
limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
pr_debug("%s: loaded %d, limit %d\n",
__func__, prtd->dma_loaded, limit);
while (prtd->dma_loaded < limit) {
unsigned long len = prtd->dma_period;
dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE);
dma_info.direction =
(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
? DMA_TO_DEVICE : DMA_FROM_DEVICE);
dma_info.fp = audio_buffdone;
dma_info.fp_param = substream;
dma_info.period = prtd->dma_period;
dma_info.len = prtd->dma_period*limit;
while (prtd->dma_loaded < limit) {
pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
if ((pos + len) > prtd->dma_end) {
len = prtd->dma_end - pos;
pr_debug("%s: corrected dma len %ld\n", __func__, len);
if ((pos + dma_info.period) > prtd->dma_end) {
dma_info.period = prtd->dma_end - pos;
pr_debug("%s: corrected dma len %ld\n",
__func__, dma_info.period);
}
ret = s3c2410_dma_enqueue(prtd->params->channel,
substream, pos, len);
dma_info.buf = pos;
prtd->params->ops->prepare(prtd->params->ch, &dma_info);
if (ret == 0) {
prtd->dma_loaded++;
pos += prtd->dma_period;
if (pos >= prtd->dma_end)
pos = prtd->dma_start;
} else
break;
prtd->dma_loaded++;
pos += prtd->dma_period;
if (pos >= prtd->dma_end)
pos = prtd->dma_start;
}
prtd->dma_pos = pos;
}
static void audio_buffdone(struct s3c2410_dma_chan *channel,
void *dev_id, int size,
enum s3c2410_dma_buffresult result)
static void audio_buffdone(void *data)
{
struct snd_pcm_substream *substream = dev_id;
struct runtime_data *prtd;
struct snd_pcm_substream *substream = data;
struct runtime_data *prtd = substream->runtime->private_data;
pr_debug("Entered %s\n", __func__);
if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
return;
if (prtd->state & ST_RUNNING) {
prtd->dma_pos += prtd->dma_period;
if (prtd->dma_pos >= prtd->dma_end)
prtd->dma_pos = prtd->dma_start;
prtd = substream->runtime->private_data;
if (substream)
snd_pcm_period_elapsed(substream);
if (substream)
snd_pcm_period_elapsed(substream);
spin_lock(&prtd->lock);
if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
prtd->dma_loaded--;
dma_enqueue(substream);
spin_lock(&prtd->lock);
if (!samsung_dma_has_circular()) {
prtd->dma_loaded--;
dma_enqueue(substream);
}
spin_unlock(&prtd->lock);
}
spin_unlock(&prtd->lock);
}
static int dma_hw_params(struct snd_pcm_substream *substream,
@ -144,8 +145,7 @@ static int dma_hw_params(struct snd_pcm_substream *substream,
unsigned long totbytes = params_buffer_bytes(params);
struct s3c_dma_params *dma =
snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
int ret = 0;
struct samsung_dma_info dma_info;
pr_debug("Entered %s\n", __func__);
@ -163,30 +163,26 @@ static int dma_hw_params(struct snd_pcm_substream *substream,
pr_debug("params %p, client %p, channel %d\n", prtd->params,
prtd->params->client, prtd->params->channel);
ret = s3c2410_dma_request(prtd->params->channel,
prtd->params->client, NULL);
prtd->params->ops = samsung_dma_get_ops();
if (ret < 0) {
printk(KERN_ERR "failed to get dma channel\n");
return ret;
}
/* use the circular buffering if we have it available. */
if (s3c_dma_has_circular())
s3c2410_dma_setflags(prtd->params->channel,
S3C2410_DMAF_CIRCULAR);
dma_info.cap = (samsung_dma_has_circular() ?
DMA_CYCLIC : DMA_SLAVE);
dma_info.client = prtd->params->client;
dma_info.direction =
(substream->stream == SNDRV_PCM_STREAM_PLAYBACK
? DMA_TO_DEVICE : DMA_FROM_DEVICE);
dma_info.width = prtd->params->dma_size;
dma_info.fifo = prtd->params->dma_addr;
prtd->params->ch = prtd->params->ops->request(
prtd->params->channel, &dma_info);
}
s3c2410_dma_set_buffdone_fn(prtd->params->channel,
audio_buffdone);
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = totbytes;
spin_lock_irq(&prtd->lock);
prtd->dma_loaded = 0;
prtd->dma_limit = runtime->hw.periods_min;
prtd->dma_period = params_period_bytes(params);
prtd->dma_start = runtime->dma_addr;
prtd->dma_pos = prtd->dma_start;
@ -206,7 +202,8 @@ static int dma_hw_free(struct snd_pcm_substream *substream)
snd_pcm_set_runtime_buffer(substream, NULL);
if (prtd->params) {
s3c2410_dma_free(prtd->params->channel, prtd->params->client);
prtd->params->ops->release(prtd->params->ch,
prtd->params->client);
prtd->params = NULL;
}
@ -225,23 +222,9 @@ static int dma_prepare(struct snd_pcm_substream *substream)
if (!prtd->params)
return 0;
/* channel needs configuring for mem=>device, increment memory addr,
* sync to pclk, half-word transfers to the IIS-FIFO. */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
s3c2410_dma_devconfig(prtd->params->channel,
S3C2410_DMASRC_MEM,
prtd->params->dma_addr);
} else {
s3c2410_dma_devconfig(prtd->params->channel,
S3C2410_DMASRC_HW,
prtd->params->dma_addr);
}
s3c2410_dma_config(prtd->params->channel,
prtd->params->dma_size);
/* flush the DMA channel */
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
prtd->params->ops->flush(prtd->params->ch);
prtd->dma_loaded = 0;
prtd->dma_pos = prtd->dma_start;
@ -265,14 +248,14 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
prtd->params->ops->stop(prtd->params->ch);
break;
default:
@ -291,21 +274,12 @@ dma_pointer(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct runtime_data *prtd = runtime->private_data;
unsigned long res;
dma_addr_t src, dst;
pr_debug("Entered %s\n", __func__);
spin_lock(&prtd->lock);
s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
res = prtd->dma_pos - prtd->dma_start;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
res = dst - prtd->dma_start;
else
res = src - prtd->dma_start;
spin_unlock(&prtd->lock);
pr_debug("Pointer %x %x\n", src, dst);
pr_debug("Pointer offset: %lu\n", res);
/* we seem to be getting the odd error from the pcm library due
* to out-of-bounds pointers. this is maybe due to the dma engine

4
sound/soc/samsung/dma.h
View File

@ -6,7 +6,7 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* ALSA PCM interface for the Samsung S3C24xx CPU
* ALSA PCM interface for the Samsung SoC
*/
#ifndef _S3C_AUDIO_H
@ -17,6 +17,8 @@ struct s3c_dma_params {
int channel; /* Channel ID */
dma_addr_t dma_addr;
int dma_size; /* Size of the DMA transfer */
unsigned ch;
struct samsung_dma_ops *ops;
};
#endif