From 218e0b575ffe6de1c93249871b25bbf570fe1cb5 Mon Sep 17 00:00:00 2001 From: Marcus Weseloh Date: Tue, 5 Jan 2016 21:46:20 +0100 Subject: [PATCH] spi: sun4i: Prevent chip-select from being activated twice before a transfer The SPI core calls set_cs before a transfer, but the SUN4I_CTL_CS_MANUAL flag is only set in transfer_one. This leads to the following pattern on the chip-select line (with runtime power-management on every transfer, without it only on the first one): activate, deactivate, activate, transfer, deactivate Moving the configuration of the SUN4I_CTL_CS_MANUAL flag from transfer_one to set_cs removes the double activation. Signed-off-by: Marcus Weseloh Acked-by: Maxime Ripard Signed-off-by: Mark Brown --- drivers/spi/spi-sun4i.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index fbb0a4d74e91..a6d936c68674 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -140,6 +140,9 @@ static void sun4i_spi_set_cs(struct spi_device *spi, bool enable) reg &= ~SUN4I_CTL_CS_MASK; reg |= SUN4I_CTL_CS(spi->chip_select); + /* We want to control the chip select manually */ + reg |= SUN4I_CTL_CS_MANUAL; + if (enable) reg |= SUN4I_CTL_CS_LEVEL; else @@ -222,9 +225,6 @@ static int sun4i_spi_transfer_one(struct spi_master *master, else reg |= SUN4I_CTL_DHB; - /* We want to control the chip select manually */ - reg |= SUN4I_CTL_CS_MANUAL; - sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); /* Ensure that we have a parent clock fast enough */