diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index a2f9a1815e38..491797a5dfc8 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -20,6 +20,7 @@
 #include <linux/debugfs.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
+#include <linux/sync_file.h>
 #include <linux/poll.h>
 #include <linux/dma-resv.h>
 #include <linux/mm.h>
@@ -192,6 +193,9 @@ static loff_t dma_buf_llseek(struct file *file, loff_t offset, int whence)
  * Note that this only signals the completion of the respective fences, i.e. the
  * DMA transfers are complete. Cache flushing and any other necessary
  * preparations before CPU access can begin still need to happen.
+ *
+ * As an alternative to poll(), the set of fences on DMA buffer can be
+ * exported as a &sync_file using &dma_buf_sync_file_export.
  */
 
 static void dma_buf_poll_cb(struct dma_fence *fence, struct dma_fence_cb *cb)
@@ -326,6 +330,64 @@ static long dma_buf_set_name(struct dma_buf *dmabuf, const char __user *buf)
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_SYNC_FILE)
+static long dma_buf_export_sync_file(struct dma_buf *dmabuf,
+				     void __user *user_data)
+{
+	struct dma_buf_export_sync_file arg;
+	enum dma_resv_usage usage;
+	struct dma_fence *fence = NULL;
+	struct sync_file *sync_file;
+	int fd, ret;
+
+	if (copy_from_user(&arg, user_data, sizeof(arg)))
+		return -EFAULT;
+
+	if (arg.flags & ~DMA_BUF_SYNC_RW)
+		return -EINVAL;
+
+	if ((arg.flags & DMA_BUF_SYNC_RW) == 0)
+		return -EINVAL;
+
+	fd = get_unused_fd_flags(O_CLOEXEC);
+	if (fd < 0)
+		return fd;
+
+	usage = dma_resv_usage_rw(arg.flags & DMA_BUF_SYNC_WRITE);
+	ret = dma_resv_get_singleton(dmabuf->resv, usage, &fence);
+	if (ret)
+		goto err_put_fd;
+
+	if (!fence)
+		fence = dma_fence_get_stub();
+
+	sync_file = sync_file_create(fence);
+
+	dma_fence_put(fence);
+
+	if (!sync_file) {
+		ret = -ENOMEM;
+		goto err_put_fd;
+	}
+
+	arg.fd = fd;
+	if (copy_to_user(user_data, &arg, sizeof(arg))) {
+		ret = -EFAULT;
+		goto err_put_file;
+	}
+
+	fd_install(fd, sync_file->file);
+
+	return 0;
+
+err_put_file:
+	fput(sync_file->file);
+err_put_fd:
+	put_unused_fd(fd);
+	return ret;
+}
+#endif
+
 static long dma_buf_ioctl(struct file *file,
 			  unsigned int cmd, unsigned long arg)
 {
@@ -369,6 +431,11 @@ static long dma_buf_ioctl(struct file *file,
 	case DMA_BUF_SET_NAME_B:
 		return dma_buf_set_name(dmabuf, (const char __user *)arg);
 
+#if IS_ENABLED(CONFIG_SYNC_FILE)
+	case DMA_BUF_IOCTL_EXPORT_SYNC_FILE:
+		return dma_buf_export_sync_file(dmabuf, (void __user *)arg);
+#endif
+
 	default:
 		return -ENOTTY;
 	}
diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
index 8e4a2ca0bcbf..46f1e3e98b02 100644
--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -85,6 +85,40 @@ struct dma_buf_sync {
 
 #define DMA_BUF_NAME_LEN	32
 
+/**
+ * struct dma_buf_export_sync_file - Get a sync_file from a dma-buf
+ *
+ * Userspace can perform a DMA_BUF_IOCTL_EXPORT_SYNC_FILE to retrieve the
+ * current set of fences on a dma-buf file descriptor as a sync_file.  CPU
+ * waits via poll() or other driver-specific mechanisms typically wait on
+ * whatever fences are on the dma-buf at the time the wait begins.  This
+ * is similar except that it takes a snapshot of the current fences on the
+ * dma-buf for waiting later instead of waiting immediately.  This is
+ * useful for modern graphics APIs such as Vulkan which assume an explicit
+ * synchronization model but still need to inter-operate with dma-buf.
+ */
+struct dma_buf_export_sync_file {
+	/**
+	 * @flags: Read/write flags
+	 *
+	 * Must be DMA_BUF_SYNC_READ, DMA_BUF_SYNC_WRITE, or both.
+	 *
+	 * If DMA_BUF_SYNC_READ is set and DMA_BUF_SYNC_WRITE is not set,
+	 * the returned sync file waits on any writers of the dma-buf to
+	 * complete.  Waiting on the returned sync file is equivalent to
+	 * poll() with POLLIN.
+	 *
+	 * If DMA_BUF_SYNC_WRITE is set, the returned sync file waits on
+	 * any users of the dma-buf (read or write) to complete.  Waiting
+	 * on the returned sync file is equivalent to poll() with POLLOUT.
+	 * If both DMA_BUF_SYNC_WRITE and DMA_BUF_SYNC_READ are set, this
+	 * is equivalent to just DMA_BUF_SYNC_WRITE.
+	 */
+	__u32 flags;
+	/** @fd: Returned sync file descriptor */
+	__s32 fd;
+};
+
 #define DMA_BUF_BASE		'b'
 #define DMA_BUF_IOCTL_SYNC	_IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
 
@@ -94,5 +128,6 @@ struct dma_buf_sync {
 #define DMA_BUF_SET_NAME	_IOW(DMA_BUF_BASE, 1, const char *)
 #define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, u32)
 #define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, u64)
+#define DMA_BUF_IOCTL_EXPORT_SYNC_FILE	_IOWR(DMA_BUF_BASE, 2, struct dma_buf_export_sync_file)
 
 #endif